Installation
------------------
Unpack the IMAGE file and copy the image an SD card: (assuming SD card at /dev/mmcblk0):

  # zstd -d slarm64-current-*-server-*-build-*.img.zst
  # dd if=slarm64-current-*-server-*-build-*.img of=/dev/mmcblk0 bs=1M

or unpack directly to the card

  # zstdcat slarm64-current-*-server-*-build-*.img.zst > /dev/mmcblk0


Instalation eMMC/NAND/USB-HDD
------------------
to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
  # transfer-to-disk


Default Login
------------------
login: root


Debug
------------------
speed: 115200
pins:
    Pin 6   is GRD
    Pin 8   is RTX (UART_AO_A_TXD)
    Pin 10  is TXD (UART_AO_A_RXD)

example: screen /dev/ttyUSB0 115200,cs8