﻿3GPP TS 38.473 V16.10.0 (2022-06)
Technical Specification
3rd Generation Partnership Project;
Technical Specification Group Radio Access Network;
 NG-RAN;
F1 application protocol (F1AP)
(Release 16)



Keywords
NG-RAN, Radio


3GPP
Postal address

3GPP support office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Internet
http://www.3gpp.org

Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© 2022, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TSDSI, TTA, TTC).
All rights reserved.

UMTS™ is a Trade Mark of ETSI registered for the benefit of its members
3GPP™ is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners
LTE™ is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners
GSM® and the GSM logo are registered and owned by the GSM Association
Contents
Foreword	14
1	Scope	15
2	References	15
3	Definitions and abbreviations	17
3.1	Definitions	17
3.2	Abbreviations	18
4	General	19
4.1	Procedure specification principles	19
4.2	Forwards and backwards compatibility	19
4.3	Specification notations	19
5	F1AP services	20
6	Services expected from signalling transport	20
7	Functions of F1AP	20
8	F1AP procedures	20
8.1	List of F1AP Elementary procedures	20
8.2	Interface Management procedures	23
8.2.1	Reset	23
8.2.1.1	General	23
8.2.1.2	Successful Operation	23
8.2.1.2.1	Reset Procedure Initiated from the gNB-CU	23
8.2.1.2.2	Reset Procedure Initiated from the gNB-DU	24
8.2.1.3	Abnormal Conditions	25
8.2.2	Error Indication	25
8.2.2.1	General	25
8.2.2.2	Successful Operation	25
8.2.2.3	Abnormal Conditions	25
8.2.3	F1 Setup	25
8.2.3.1	General	25
8.2.3.2	Successful Operation	26
8.2.3.3	Unsuccessful Operation	28
8.2.3.4	Abnormal Conditions	28
8.2.4	gNB-DU Configuration Update	28
8.2.4.1	General	28
8.2.4.2	Successful Operation	28
8.2.4.3	Unsuccessful Operation	30
8.2.4.4	Abnormal Conditions	31
8.2.5	gNB-CU Configuration Update	31
8.2.5.1	General	31
8.2.5.2	Successful Operation	31
8.2.5.3	Unsuccessful Operation	33
8.2.5.4	Abnormal Conditions	33
8.2.6	gNB-DU Resource Coordination	33
8.2.6.1	General	33
8.2.6.2	Successful Operation	33
8.2.7	gNB-DU Status Indication	34
8.2.7.1	General	34
8.2.7.2	Successful Operation	34
8.2.7.3	Abnormal Conditions	34
8.2.8	F1 Removal	34
8.2.8.1	General	34
8.2.8.2	Successful Operation	35
8.2.8.3	Unsuccessful Operation	35
8.2.8.4	Abnormal Conditions	36
8.2.9	Network Access Rate Reduction	36
8.2.9.1	General	36
8.2.9.2	Successful operation	36
8.2.9.3	Abnormal Conditions	37
8.2.10	Resource Status Reporting Initiation	37
8.2.10.1	General	37
8.2.10.2	Successful Operation	37
8.2.10.3	Unsuccessful Operation	38
8.2.10.4	Abnormal Conditions	38
8.2.11	Resource Status Reporting	39
8.2.11.1	General	39
8.2.11.2	Successful Operation	39
8.2.11.3	Unsuccessful Operation	39
8.2.11.4	Abnormal Conditions	39
8.3	UE Context Management procedures	39
8.3.1	UE Context Setup	39
8.3.1.1	General	39
8.3.1.2	Successful Operation	40
8.3.1.3	Unsuccessful Operation	45
8.3.1.4	Abnormal Conditions	45
8.3.2	UE Context Release Request (gNB-DU initiated)	46
8.3.2.1	General	46
8.3.2.2	Successful Operation	46
8.3.2.3	Abnormal Conditions	46
8.3.3	UE Context Release (gNB-CU initiated)	47
8.3.3.1	General	47
8.3.3.2	Successful Operation	47
8.3.3.4	Abnormal Conditions	47
8.3.4	UE Context Modification (gNB-CU initiated)	48
8.3.4.1	General	48
8.3.4.2	Successful Operation	48
8.3.4.3	Unsuccessful Operation	55
8.3.4.4	Abnormal Conditions	55
8.3.5	UE Context Modification Required (gNB-DU initiated)	55
8.3.5.1	General	55
8.3.5.2	Successful Operation	56
8.3.5.2A	Unsuccessful Operation	57
8.3.5.3	Abnormal Conditions	57
8.3.6	UE Inactivity Notification	57
8.3.6.1	General	57
8.3.6.2	Successful Operation	58
8.3.6.3	Abnormal Conditions	58
8.3.7	Notify	58
8.3.7.1	General	58
8.3.7.2	Successful Operation	58
8.3.7.3	Abnormal Conditions	58
8.3.8	Access Success	59
8.3.8.1	General	59
8.3.8.2	Successful Operation	59
8.3.8.3	Abnormal Conditions	59
8.4	RRC Message Transfer procedures	59
8.4.1	Initial UL RRC Message Transfer	59
8.4.1.1	General	59
8.4.1.2	Successful operation	60
8.4.1.3	Abnormal Conditions	60
8.4.2	DL RRC Message Transfer	60
8.4.2.1	General	60
8.4.2.2	Successful operation	60
8.4.2.3	Abnormal Conditions	61
8.4.3	UL RRC Message Transfer	61
8.4.3.1	General	61
8.4.3.2	Successful operation	61
8.4.3.3	Abnormal Conditions	62
8.4.4	RRC Delivery Report	62
8.4.4.1	General	62
8.4.4.2	Successful operation	62
8.4.4.3	Abnormal Conditions	62
8.5	Warning Message Transmission Procedures	62
8.5.1	Write-Replace Warning	62
8.5.1.1	General	62
8.5.1.2	Successful Operation	63
8.5.1.3	Unsuccessful Operation	63
8.5.1.4	Abnormal Conditions	63
8.5.2	PWS Cancel	64
8.5.2.1	General	64
8.5.2.2	Successful Operation	64
8.5.2.3	Unsuccessful Operation	64
8.5.3	PWS Restart Indication	65
8.5.3.1	General	65
8.5.3.2	Successful Operation	65
8.5.3.3	Abnormal Conditions	65
8.5.4	PWS Failure Indication	65
8.5.4.1	General	65
8.5.4.2	Successful Operation	65
8.5.4.3	Abnormal Conditions	65
8.6	System Information Procedures	66
8.6.1	System Information Delivery	66
8.6.1.1	General	66
8.6.1.2	Successful Operation	66
8.6.1.3	Abnormal Conditions	66
8.7	Paging procedures	66
8.7.1	Paging	66
8.7.1.1	General	66
8.7.1.2	Successful Operation	67
8.7.1.3	Abnormal Conditions	67
8.8	Trace Procedures	67
8.8.1	Trace Start	67
8.8.1.1	General	67
8.8.1.2	Successful Operation	67
8.8.1.3	Abnormal Conditions	68
8.8.2	Deactivate Trace	68
8.8.2.1	General	68
8.8.2.2	Successful Operation	68
8.8.2.3	Abnormal Conditions	68
8.8.3	Cell Traffic Trace	68
8.8.3.1	General	68
8.8.3.2	Successful Operation	69
8.8.3.3	Abnormal Conditions	69
8.9	Radio Information Transfer procedures	69
8.9.1	DU-CU Radio Information Transfer	69
8.9.1.1	General	69
8.9.1.2	Successful operation	69
8.9.1.3	Abnormal Conditions	69
8.9.2	CU-DU Radio Information Transfer	70
8.9.2.1	General	70
8.9.2.2	Successful operation	70
8.9.2.3	Abnormal Conditions	70
8.10	IAB Procedures	70
8.10.0	General	70
8.10.1	BAP Mapping Configuration	70
8.10.1.1	General	70
8.10.1.2	Successful Operation	70
8.10.1.A	Unsuccessful Operation	71
8.10.1.3	Abnormal Conditions	72
8.10.2	gNB-DU Resource Configuration	72
8.10.2.1	General	72
8.10.2.2	Successful Operation	72
8.10.2.B	Unsuccessful Operation	72
8.10.2.3	Abnormal Conditions	73
8.10.3	IAB TNL Address Allocation	73
8.10.3.1	General	73
8.10.3.2	Successful Operation	73
8.10.3.C	Unsuccessful Operation	74
8.10.3.3	Abnormal Conditions	74
8.10.4	IAB UP Configuration Update	74
8.10.4.1	General	74
8.10.4.2	Successful Operation	74
8.10.4.3	Unsuccessful Operation	75
8.10.4.4	Abnormal Conditions	75
8.11	Self Optimisation Support procedures	75
8.11.1	Access and Mobility Indication	75
8.11.1.1	General	75
8.11.1.2	Successful Operation	76
8.11.1.3	Abnormal Conditions	76
8.12	Reference Time Information Reporting procedures	76
8.12.1	Reference Time Information Reporting Control	76
8.12.1.1	General	76
8.12.1.2	Successful Operation	76
8.12.1.3	Abnormal Conditions	77
8.12.2	Reference Time Information Report	77
8.12.2.1	General	77
8.12.2.2	Successful Operation	77
8.12.2.3	Abnormal Conditions	77
8.13	Positioning Procedures	77
8.13.1	Positioning Assistance Information Control	77
8.13.1.1	General	77
8.13.1.2	Successful Operation	78
8.13.1.3	Abnormal Conditions	78
8.13.2	Positioning Assistance Information Feedback	78
8.13.2.1	General	78
8.13.2.2	Successful Operation	79
8.13.2.3	Abnormal Conditions	79
8.13.3	Positioning Measurement	79
8.13.3.1	General	79
8.13.3.2	Successful Operation	79
8.13.3.3	Unsuccessful Operation	80
8.13.3.4	Abnormal Conditions	80
8.13.4	Positioning Measurement Report	80
8.13.4.1	General	80
8.13.4.2	Successful Operation	81
8.13.4.3	Unsuccessful Operation	81
8.13.4.4	Abnormal Conditions	81
8.13.5	Positioning Measurement Abort	81
8.13.5.1	General	81
8.13.5.2	Successful Operation	81
8.13.5.3	Unsuccessful Operation	81
8.13.5.4	Abnormal Conditions	81
8.13.6	Positioning Measurement Failure Indication	82
8.13.6.1	General	82
8.13.6.2	Successful Operation	82
8.13.6.3	Unsuccessful Operation	82
8.13.6.4	Abnormal Conditions	82
8.13.7	Positioning Measurement Update	82
8.13.7.1	General	82
8.13.7.2	Successful Operation	82
8.13.7.3	Unsuccessful Operation	83
8.13.7.4	Abnormal Conditions	83
8.13.8	TRP Information Exchange	83
8.13.8.1	General	83
8.13.8.2	Successful Operation	83
8.13.8.3	Unsuccessful Operation	84
8.13.9	Positioning Information Exchange	84
8.13.9.1	General	84
8.13.9.2	Successful Operation	84
8.13.9.3	Unsuccessful Operation	85
8.13.10	Positioning Activation	85
8.13.10.1	General	85
8.13.10.2	Successful Operation	85
8.13.10.3	Unsuccessful Operation	86
8.13.10.4	Abnormal Conditions	86
8.13.11	Positioning Deactivation	86
8.13.11.1	General	86
8.13.11.2	Successful Operation	86
8.13.11.3	Unsuccessful Operation	86
8.13.11.4	Abnormal Conditions	86
8.13.12	E-CID Measurement Initiation	87
8.13.12.1	General	87
8.13.12.2	Successful Operation	87
8.13.12.3	Unsuccessful Operation	87
8.13.13	E-CID Measurement Failure Indication	88
8.13.13.1	General	88
8.13.13.2	Successful Operation	88
8.13.13.3	Unsuccessful Operation	88
8.13.14	E-CID Measurement Report	88
8.13.14.1	General	88
8.13.14.2	Successful Operation	88
8.13.14.3	Unsuccessful Operation	89
8.13.15	E-CID Measurement Termination	89
8.13.15.1	General	89
8.13.15.2	Successful Operation	89
8.13.15.3	Unsuccessful Operation	89
8.13.16	Positioning Information Update	89
8.13.16.1	General	89
8.13.16.2	Successful Operation	89
8.13.16.3	Unsuccessful Operation	90
8.13.16.4	Abnormal Conditions	90
9	Elements for F1AP Communication	90
9.1	General	90
9.2	Message Functional Definition and Content	90
9.2.1	Interface Management messages	90
9.2.1.1	RESET	90
9.2.1.2	RESET ACKNOWLEDGE	91
9.2.1.3	ERROR INDICATION	91
9.2.1.4	F1 SETUP REQUEST	92
9.2.1.5	F1 SETUP RESPONSE	93
9.2.1.6	F1 SETUP FAILURE	94
9.2.1.7	GNB-DU CONFIGURATION UPDATE	94
9.2.1.8	GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE	96
9.2.1.9	GNB-DU CONFIGURATION UPDATE FAILURE	97
9.2.1.10	GNB-CU CONFIGURATION UPDATE	97
9.2.1.11	GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE	101
9.2.1.12	GNB-CU CONFIGURATION UPDATE FAILURE	102
9.2.1.13	GNB-DU RESOURCE COORDINATION REQUEST	102
9.2.1.14	GNB-DU RESOURCE COORDINATION RESPONSE	102
9.2.1.15	GNB-DU STATUS INDICATION	103
9.2.1.16	F1 REMOVAL REQUEST	103
9.2.1.17	F1 REMOVAL RESPONSE	103
9.2.1.18	F1 REMOVAL FAILURE	104
9.2.1.19	NETWORK ACCESS RATE REDUCTION	104
9.2.1.20	RESOURCE STATUS REQUEST	104
9.2.1.21	RESOURCE STATUS RESPONSE	106
9.2.1.22	RESOURCE STATUS FAILURE	106
9.2.1.23	RESOURCE STATUS UPDATE	107
9.2.2	UE Context Management messages	107
9.2.2.1	UE CONTEXT SETUP REQUEST	107
9.2.2.2	UE CONTEXT SETUP RESPONSE	112
9.2.2.3	UE CONTEXT SETUP FAILURE	115
9.2.2.4	UE CONTEXT RELEASE REQUEST	116
9.2.2.5	UE CONTEXT RELEASE COMMAND	116
9.2.2.6	UE CONTEXT RELEASE COMPLETE	117
9.2.2.7	UE CONTEXT MODIFICATION REQUEST	118
9.2.2.8	UE CONTEXT MODIFICATION RESPONSE	126
9.2.2.9	UE CONTEXT MODIFICATION FAILURE	131
9.2.2.10	UE CONTEXT MODIFICATION REQUIRED	131
9.2.2.11	UE CONTEXT MODIFICATION CONFIRM	133
9.2.2.11A	UE CONTEXT MODIFICATION REFUSE	135
9.2.2.12	UE INACTIVITY NOTIFICATION	135
9.2.2.13	 NOTIFY	136
9.2.2.14	ACCESS SUCCESS	136
9.2.3	RRC Message Transfer messages	136
9.2.3.1	INITIAL UL RRC MESSAGE TRANSFER	136
9.2.3.2	DL RRC MESSAGE TRANSFER	137
9.2.3.3	UL RRC MESSAGE TRANSFER	138
9.2.3.4	RRC DELIVERY REPORT	138
9.2.4	Warning Message Transmission Messages	138
9.2.4.1	WRITE-REPLACE WARNING REQUEST	138
9.2.4.2	WRITE-REPLACE WARNING RESPONSE	139
9.2.4.3	PWS CANCEL REQUEST	140
9.2.4.4	PWS CANCEL RESPONSE	141
9.2.4.5	PWS RESTART INDICATION	142
9.2.4.6	PWS FAILURE INDICATION	143
9.2.5	System Information messages	143
9.2.5.1	SYSTEM INFORMATION DELIVERY COMMAND	143
9.2.6	Paging messages	143
9.2.6.1	PAGING	143
9.2.7	Trace Messages	144
9.2.7.1	TRACE START	144
9.2.7.2	DEACTIVATE TRACE	144
9.2.7.3	CELL TRAFFIC TRACE	144
9.2.8	Radio Information Transfer messages	145
9.2.8.1	DU-CU RADIO INFORMATION TRANSFER	145
9.2.8.2	CU-DU RADIO INFORMATION TRANSFER	145
9.2.9	IAB messages	146
9.2.9.1	BAP MAPPING CONFIGURATION	146
9.2.9.2	BAP MAPPING CONFIGURATION ACKNOWLEDGE	146
9.2.9.2A	BAP MAPPING CONFIGURATION FAILURE	147
9.2.9.3	GNB-DU RESOURCE CONFIGURATION	147
9.2.9.4	GNB-DU RESOURCE CONFIGURATION ACKNOWLEDGE	150
9.2.9.4A	GNB-DU RESOURCE CONFIGURATION FAILURE	150
9.2.9.5	IAB TNL ADDRESS REQUEST	150
9.2.9.6	IAB TNL ADDRESS RESPONSE	151
9.2.9.6A	IAB TNL ADDRESS FAILURE	152
9.2.9.7	IAB UP CONFIGURATION UPDATE REQUEST	152
9.2.9.8	IAB UP CONFIGURATION UPDATE RESPONSE	153
9.2.9.9	IAB UP CONFIGURATION UPDATE FAILURE	154
9.2.10	Self Optimisation Support Messages	154
9.2.10.1	ACCESS AND MOBILITY INDICATION	154
9.2.11	Reference Time Information Reporting messages	155
9.2.11.1	REFERENCE TIME INFORMATION REPORTING CONTROL	155
9.2.11.2	REFERENCE TIME INFORMATION REPORT	155
9.2.12	Messages for Positioning Procedures	156
9.2.12.1	POSITIONING ASSISTANCE INFORMATION CONTROL	156
9.2.12.2	POSITIONING ASSISTANCE INFORMATION FEEDBACK	156
9.2.12.3	POSITIONING MEASUREMENT REQUEST	157
9.2.12.4	POSITIONING MEASUREMENT RESPONSE	159
9.2.12.5	POSITIONING MEASUREMENT FAILURE	159
9.2.12.6	POSITIONING MEASUREMENT REPORT	160
9.2.12.7	POSITIONING MEASUREMENT ABORT	160
9.2.12.8	POSITIONING MEASUREMENT FAILURE INDICATION	161
9.2.12.9	POSITIONING MEASUREMENT UPDATE	161
9.2.12.10	TRP INFORMATION REQUEST	161
9.2.12.11	TRP INFORMATION RESPONSE	162
9.2.12.12	TRP INFORMATION FAILURE	162
9.2.12.13	POSITIONING INFORMATION REQUEST	162
9.2.12.14	POSITIONING INFORMATION RESPONSE	162
9.2.12.15	POSITIONING INFORMATION FAILURE	163
9.2.12.16	POSITIONING ACTIVATION REQUEST	163
9.2.12.17	POSITIONING ACTIVATION RESPONSE	164
9.2.12.18	POSITIONING ACTIVATION FAILURE	164
9.2.12.19	POSITIONING DEACTIVATION	165
9.2.12.20	E-CID MEASUREMENT INITIATION REQUEST	165
9.2.12.21	E-CID MEASUREMENT INITIATION RESPONSE	166
9.2.12.22	E-CID MEASUREMENT INITIATION FAILURE	166
9.2.12.23	E-CID MEASUREMENT FAILURE INDICATION	166
9.2.12.24	E-CID MEASUREMENT REPORT	166
9.2.12.25	E-CID MEASUREMENT TERMINATION COMMAND	167
9.2.12.26	POSITIONING INFORMATION UPDATE	167
9.3	Information Element Definitions	167
9.3.1	Radio Network Layer Related IEs	167
9.3.1.1	Message Type	167
9.3.1.2	Cause	168
9.3.1.3	Criticality Diagnostics	170
9.3.1.4	gNB-CU UE F1AP ID	171
9.3.1.5	gNB-DU UE F1AP ID	171
9.3.1.6	RRC-Container	172
9.3.1.7	SRB ID	172
9.3.1.8	DRB ID	172
9.3.1.9	gNB-DU ID	172
9.3.1.10	Served Cell Information	172
9.3.1.11	Transmission Action Indicator	175
9.3.1.12	NR CGI	175
9.3.1.13	Time To wait	176
9.3.1.14	PLMN Identity	176
9.3.1.15	Transmission Bandwidth	176
9.3.1.16	Void	176
9.3.1.17	NR Frequency Info	177
9.3.1.18	gNB-DU System Information	179
9.3.1.19	E-UTRAN QoS	179
9.3.1.20	Allocation and Retention Priority	180
9.3.1.21	GBR QoS Information	181
9.3.1.22	Bit Rate	182
9.3.1.23	Transaction ID	182
9.3.1.24	DRX Cycle	182
9.3.1.25	CU to DU RRC Information	182
9.3.1.26	DU to CU RRC Information	183
9.3.1.27	RLC Mode	185
9.3.1.28	SUL Information	185
9.3.1.29	5GS TAC	186
9.3.1.29a	Configured EPS TAC	186
9.3.1.30	RRC Reconfiguration Complete Indicator	186
9.3.1.31	UL Configuration	187
9.3.1.32	C-RNTI	187
9.3.1.33	Cell UL Configured	187
9.3.1.34	RAT-Frequency Priority Information	187
9.3.1.35	LCID	188
9.3.1.36	Duplication activation	188
9.3.1.37	Slice Support List	188
9.3.1.38	S-NSSAI	188
9.3.1.39	UE Identity Index value	188
9.3.1.40	Paging DRX	189
9.3.1.41	Paging Priority	189
9.3.1.42	gNB-CU System Information	189
9.3.1.43	RAN UE Paging identity	190
9.3.1.44	CN UE Paging Identity	190
9.3.1.45	QoS Flow Level QoS Parameters	190
9.3.1.46	GBR QoS Flow Information	191
9.3.1.47	Dynamic 5QI Descriptor	192
9.3.1.48	NG-RAN Allocation and Retention Priority	194
9.3.1.49	Non Dynamic 5QI Descriptor	194
9.3.1.50	Maximum Packet Loss Rate	195
9.3.1.51	Packet Delay Budget	196
9.3.1.52	Packet Error Rate	196
9.3.1.53	Averaging Window	196
9.3.1.54	Maximum Data Burst Volume	196
9.3.1.55	Masked IMEISV	196
9.3.1.56	Notification Control	196
9.3.1.57	RAN Area Code	197
9.3.1.58	PWS System Information	197
9.3.1.59	Repetition Period	197
9.3.1.60	Number of Broadcasts Requested	197
9.3.1.61	Void	198
9.3.1.62	SIType List	198
9.3.1.63	QoS Flow Identifier	198
9.3.1.64	Served E-UTRA Cell Information	198
9.3.1.65	Available PLMN List	198
9.3.1.66	RLC Failure Indication	199
9.3.1.67	Uplink TxDirectCurrentList Information	199
9.3.1.68	Service Status	199
9.3.1.69	RLC Status	199
9.3.1.70	RRC Version	200
9.3.1.71	RRC Delivery Status	200
9.3.1.72	QoS Flow Mapping Indication	200
9.3.1.73	Resource Coordination Transfer Information	200
9.3.1.74	E-UTRA PRACH Configuration	200
9.3.1.75	Resource Coordination E-UTRA Cell Information	201
9.3.1.76	Extended Available PLMN List	203
9.3.1.77	Associated SCell List	203
9.3.1.78	Cell Direction	203
9.3.1.79	Paging Origin	203
9.3.1.80	E-UTRA Transmission Bandwidth	203
9.3.1.81	Message Identifier	204
9.3.1.82	Serial Number	204
9.3.1.83	UAC Assistance Information	204
9.3.1.84	UAC Action	205
9.3.1.85	 UAC reduction Indication	205
9.3.1.86	Additional SIB Message List	205
9.3.1.87	Cell Type	206
9.3.1.87a	Configured TAC Indication	206
9.3.1.88	Trace Activation	206
9.3.1.89	Intended TDD DL-UL Configuration	208
9.3.1.90	Additional RRM Policy Index	208
9.3.1.91	DU-CU RIM Information	209
9.3.1.92	CU-DU RIM Information	209
9.3.1.93	gNB Set ID	209
9.3.1.94	Lower Layer Presence Status Change	209
9.3.1.95	Traffic Mapping Information	210
9.3.1.96	IP-to-layer-2 traffic mapping Information List	210
9.3.1.97	IP Header Information	210
9.3.1.98	BAP layer BH RLC channel mapping Information List	211
9.3.1.99	Mapping Information to Remove	211
9.3.1.100	Mapping Information Index	212
9.3.1.101	IAB TNL Addresses Requested	212
9.3.1.102	IAB TNL Address	212
9.3.1.103	Uplink BH Non-UP Traffic Mapping	212
9.3.1.104	Non-UP Traffic Type	213
9.3.1.105	IAB Info IAB-donor-CU	213
9.3.1.106	IAB Info IAB-DU	213
9.3.1.107	gNB-DU Cell Resource Configuration	213
9.3.1.108	Multiplexing Info	215
9.3.1.109	IAB STC Info	215
9.3.1.110	BAP Routing ID	216
9.3.1.111	BAP Address	216
9.3.1.112	BAP Path ID	217
9.3.1.113	BH RLC Channel ID	217
9.3.1.114	BH Information	217
9.3.1.115	Control Plane Traffic Type	217
9.3.1.116	NR V2X Services Authorized	218
9.3.1.117	LTE V2X Services Authorized	218
9.3.1.118	LTE UE Sidelink Aggregate Maximum Bit Rate	218
9.3.1.119	NR UE Sidelink Aggregate Maximum Bit Rate	218
9.3.1.120	SL DRB ID	218
9.3.1.121	PC5 QoS Flow Identifier	219
9.3.1.122	PC5 QoS Parameters	219
9.3.1.123	Alternative QoS Parameters Set Index	219
9.3.1.124	Alternative QoS Parameters Set Notify Index	220
9.3.1.125	Alternative QoS Parameters Set List	220
9.3.1.126	Non Dynamic PQI Descriptor	220
9.3.1.127	Dynamic PQI Descriptor	221
9.3.1.128	TNL Capacity Indicator	221
9.3.1.129	Radio Resource Status	221
9.3.1.130	Composite Available Capacity Group	222
9.3.1.131	Composite Available Capacity	222
9.3.1.132	Cell Capacity Class Value	222
9.3.1.133	Capacity Value	223
9.3.1.134	Slice Available Capacity	223
9.3.1.135	Number of Active UEs	224
9.3.1.136	Hardware Load Indicator	224
9.3.1.137	NR Carrier List	224
9.3.1.138	SSB Positions In Burst	225
9.3.1.139	NR PRACH Configuration	225
9.3.1.140	NR PRACH Configuration List	226
9.3.1.141	TSC Traffic Characteristics	228
9.3.1.142	TSC Assistance Information	228
9.3.1.143	Periodicity	228
9.3.1.144	Burst Arrival Time	228
9.3.1.145	Extended Packet Delay Budget	228
9.3.1.146	RLC Duplication Information	228
9.3.1.147	Reporting Request Type	229
9.3.1.148	Time Reference Information	229
9.3.1.149	Reference Time	229
9.3.1.150	MDT Configuration	230
9.3.1.151	MDT PLMN List	230
9.3.1.152	M5 Configuration	231
9.3.1.153	M6 Configuration	231
9.3.1.154	M7 Configuration	231
9.3.1.155	NID	231
9.3.1.156	NPN Support Information	231
9.3.1.157	NPN Broadcast Information	232
9.3.1.158	Broadcast SNPN ID List	232
9.3.1.159	Broadcast NID List	232
9.3.1.160	Broadcast CAG-Identifier List	232
9.3.1.161	CAG ID	233
9.3.1.162	Broadcast PNI-NPN ID Information	233
9.3.1.163	Available SNPN ID List	233
9.3.1.164	Void	233
9.3.1.165	Extended Slice Support List	234
9.3.1.166	Positioning Measurement Result	234
9.3.1.167	UL Angle of Arrival	234
9.3.1.168	UL RTOA Measurement	235
9.3.1.169	Additional Path List	235
9.3.1.170	gNB Rx-Tx Time Difference	235
9.3.1.171	Time Stamp	236
9.3.1.172	TRP Measurement Quality	236
9.3.1.173	Measurement Beam Information	236
9.3.1.174	NG-RAN Access Point Position	237
9.3.1.175	Requested SRS Transmission Characteristics	237
9.3.1.176	TRP Information	239
9.3.1.177	PRS Configuration	239
9.3.1.178	DL-PRS Muting Pattern	241
9.3.1.179	Spatial Direction Information	241
9.3.1.180	SRS Resource Set ID	241
9.3.1.181	Spatial Relation Information	241
9.3.1.182	SRS Resource Trigger	242
9.3.1.183	Relative Time 1900	242
9.3.1.184	Geographical Coordinates	243
9.3.1.185	DL-PRS Resource Coordinates	244
9.3.1.186	Relative Geodetic Location	244
9.3.1.187	Relative Cartesian Location	245
9.3.1.188	Reference Point	245
9.3.1.189	Location Uncertainty	246
9.3.1.190	NG-RAN High Accuracy Access Point Position	246
9.3.1.191	Positioning Broadcast Cells	247
9.3.1.192	 SRS Configuration	247
9.3.1.193	SRS Resource	249
9.3.1.194	Positioning SRS Resource	249
9.3.1.195	SRS Resource Set	251
9.3.1.196	Positioning SRS Resource Set	251
9.3.1.197	TRP ID	251
9.3.1.198	NR-PRS Beam Information	252
9.3.1.199	E-CID Measurement Result	253
9.3.1.200	Cell Portion ID	253
9.3.1.201	Pathloss Reference Information	253
9.3.1.202	SSB Information	254
9.3.1.203	SSB Time/Frequency Configuration	254
9.3.1.204	Search Window Information	254
9.3.1.205	Extended gNB-DU Name	255
9.3.1.206	Extended gNB-CU Name	255
9.3.1.207	F1-C Transfer Path	255
9.3.1.208	SFN Offset	256
9.3.1.209	Transmission Stop Indicator	256
9.3.1.210	Spatial Relation Information per SRS Resource	256
9.3.2	Transport Network Layer Related IEs	257
9.3.2.1	UP Transport Layer Information	257
9.3.2.2	GTP-TEID	257
9.3.2.3	Transport Layer Address	258
9.3.2.4	CP Transport Layer Information	258
9.3.2.5	Transport Layer Address Info	258
9.3.2.6	URI	259
9.4	Message and Information Element Abstract Syntax (with ASN.1)	259
9.4.1	General	259
9.4.2	Usage of private message mechanism for non-standard use	260
9.4.3	Elementary Procedure Definitions	261
9.4.4	PDU Definitions	274
9.4.5	Information Element Definitions	344
9.4.6	Common Definitions	448
9.4.7	Constant Definitions	448
9.4.8	Container Definitions	460
9.5	Message Transfer Syntax	465
9.6	Timers	465
10	Handling of unknown, unforeseen and erroneous protocol data	465
Annex A (informative): Change History	466
	
Foreword
This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x	the first digit:
1	presented to TSG for information;
2	presented to TSG for approval;
3	or greater indicates TSG approved document under change control.
y	the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.
z	the third digit is incremented when editorial only changes have been incorporated in the document.
1	Scope
The present document specifies the 5G radio network layer signalling protocol for the F1 interface. The F1 interface provides means for interconnecting a gNB-CU and a gNB-DU of a gNB within an NG-RAN, or for interconnecting a gNB-CU and a gNB-DU of an en-gNB within an E-UTRAN. The F1 Application Protocol (F1AP) supports the functions of F1 interface by signalling procedures defined in the present document. F1AP is developed in accordance to the general principles stated in TS 38.401 [4] and TS 38.470 [2].
2	References
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
-	References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
-	For a specific reference, subsequent revisions do not apply.
-	For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]	3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2]	3GPP TS 38.470: "NG-RAN; F1 general aspects and principles". 
[3]	3GPP TS 38.413: "NG-RAN; NG Application Protocol (NGAP)".
[4]	3GPP TS 38.401: "NG-RAN; Architecture Description".
[5]	ITU-T Recommendation X.691 (2002-07): "Information technology - ASN.1 encoding rules - Specification of Packed Encoding Rules (PER)".
[6]	3GPP TS 38.300: "NR; Overall description; Stage-2".
[7]	3GPP TS 37.340: "NR; Multi-connectivity; Overall description; Stage-2".
[8]	3GPP TS 38.331: "NR; Radio Resource Control (RRC); Protocol specification".
[9]	3GPP TS 36.423: "Evolved Universal Terrestrial Radio Access Network (E-UTRAN); X2 Application Protocol (X2AP)".
[10]	3GPP TS 23.401: "General Packet Radio Service (GPRS) enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTRAN) access".
[11]	3GPP TS 23.203: "Policy and charging control architecture".
[12]	ITU-T Recommendation X.680 (07/2002): "Information technology – Abstract Syntax Notation One (ASN.1): Specification of basic notation".
[13]	ITU-T Recommendation X.681 (07/2002): "Information technology – Abstract Syntax Notation One (ASN.1): Information object specification".
[14]	3GPP TR 25.921: (version.7.0.0): "Guidelines and principles for protocol description and error".
[15]	3GPP TS 36.413: "Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1 Application Protocol (S1AP)".
[16]	3GPP TS 38.321: "NR; Medium Access Control (MAC) protocol specification".
[17]	3GPP TS 38.104: "NR; Base Station (BS) radio transmission and reception".
[18]	3GPP TS 29.281: "General Packet Radio System (GPRS); Tunnelling Protocol User Plane (GTPv1-U) ".
[19]	3GPP TS 38.414: "NG-RAN; NG data transport".
[20]	3GPP TS 36.300: "Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2".
[21]	3GPP TS 23.501: "System Architecture for the 5G System".
[22]	3GPP TS 38.472: "NG-RAN; F1 signalling transport". 
[23]	3GPP TS 23.003: "Numbering, addressing and identification".
[24]	3GPP TS 38.304: "NR;  User Equipment (UE) procedures in Idle mode and RRC Inactive state ".
[25]	3GPP TS 36.104: "Base Station (BS) radio transmission and reception".
[26]	3GPP TS 38.101-1: "NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone".
[27]	3GPP TS 36.211: "Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation".
[28]	3GPP TS 38.423: "NG-RAN; Xn application protocol (XnAP)".
[29]	3GPP TS 32.422: "Trace control and configuration management".
[30]	3GPP TS 38.340: "NR; Backhaul Adaptation Protocol (BAP) specification".
[31]	3GPP TS 38.213: "NR; Physical layer procedures for control".
[32]	3GPP TS 38.314: "	NR; Layer 2 measurements".
[33]	3GPP TS 38.211: "NR; Physical channels and modulation".
[34]	3GPP TS 38.214: "NR; Physical layer procedures for data".
[35]	3GPP TS 37.320: "Radio measurement collection for Minimization of Drive Tests (MDT)".
[36]	3GPP TS 23.032:"Technical Specification Group Services and System Aspects; Universal Geographical Area Description (GAD)".
[37]	3GPP TS 38.455: "NG-RAN; NR Positioning protocol A (NRPPa)".
[38]	3GPP TS 38.133: "NR; Requirements for support of radio resource management".
[39]	3GPP TS 37.355: "LTE Positioning Protocol (LPP)".
[40]	3GPP TS 23.287: "Architecture enhancements for 5G System (5GS) to support Vehicle-to-Everything (V2X) services".
[41]	3GPP TS 36.331: "Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification".
[42]	3GPP TS 38.305: "NG Radio Access Network (NG-RAN); Stage 2 functional specification of User Equipment (UE) positioning in NG-RAN".

3	Definitions and abbreviations
3.1	Definitions
elementary procedure: F1AP consists of Elementary Procedures (EPs). An Elementary Procedure is a unit of interaction between gNB-CU and gNB-DU. These Elementary Procedures are defined separately and are intended to be used to build up complete sequences in a flexible manner. If the independence between some EPs is restricted, it is described under the relevant EP description. Unless otherwise stated by the restrictions, the EPs may be invoked independently of each other as standalone procedures, which can be active in parallel. The usage of several F1AP EPs together is specified in stage 2 specifications (e.g., TS 38.470 [2]).
An EP consists of an initiating message and possibly a response message. Two kinds of EPs are used:
-	Class 1: Elementary Procedures with response (success and/or failure).
-	Class 2: Elementary Procedures without response.
For Class 1 EPs, the types of responses can be as follows:
Successful:
-	A signalling message explicitly indicates that the elementary procedure successfully completed with the receipt of the response.
Unsuccessful:
-	A signalling message explicitly indicates that the EP failed.
-	On time supervision expiry (i.e., absence of expected response).
Successful and Unsuccessful:
-	One signalling message reports both successful and unsuccessful outcome for the different included requests. The response message used is the one defined for successful outcome.
Class 2 EPs are considered always successful.
BH RLC channel: as defined in TS 38.300 [6].
Conditional handover: as defined in TS 38.300 [6].
Conditional PSCell Change: as defined in TS 37.340 [7].
DAPS Handover: as defined in TS 38.300 [6].
EN-DC operation: Used in this specification when the F1AP is applied for gNB-CU and gNB-DU in E-UTRAN.
gNB: as defined in TS 38.300 [6].
gNB-CU: as defined in TS 38.401 [4].
gNB-CU UE F1AP ID: as defined in TS 38.401 [4].
gNB-DU: as defined in TS 38.401 [4].
gNB-DU UE F1AP ID: as defined in TS 38.401 [4].
en-gNB: as defined in TS 37.340 [7].
IAB-MT: as defined in TS 38.300 [6].
IAB-DU: as defined in TS 38.300 [6].
IAB-node: as defined in TS 38.300 [6].
IAB-donor: as defined in TS 38.300 [6].
IAB-donor-CU: as defined in TS 38.401 [4].
IAB-donor-DU: as defined in TS 38.401 [4].
Public network integrated NPN: as defined in TS 23.501 [21].
Stand-alone Non-Public Network: as defined in TS 23.501 [21].
UE-associated signalling: When F1AP messages associated to one UE uses the UE-associated logical F1-connection for association of the message to the UE in gNB-DU and gNB-CU.
UE-associated logical F1-connection: The UE-associated logical F1-connection uses the identities GNB-CU UE F1AP ID and GNB-DU UE F1AP ID according to the definition in TS 38.401 [4]. For a received UE associated F1AP message the gNB-CU identifies the associated UE based on the GNB-CU UE F1AP ID IE and the gNB-DU identifies the associated UE based on the GNB-DU UE F1AP ID IE. The UE-associated logical F1-connection may exist before the F1 UE context is setup in gNB-DU.
3.2	Abbreviations
For the purposes of the present document, the abbreviations given in TR 21.905 [1] and the following apply. 
An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 [1].
5GC	5G Core Network
5QI	5G QoS Identifier
AMF	Access and Mobility Management Function
ARP	Antenna Reference Point
ARPI	Additional RRM Policy Index
BH	Backhaul
CAG	Closed Access Group
CN	Core Network
CG	Cell Group
CGI	Cell Global Identifier 
CHO	Conditional Handover
CP	Control Plane 
CPC	Conditional PSCell Change
DAPS	Dual Active Protocol Stack
DL	Downlink 
DL-PRS	Downlink Positioning Reference Signal
EN-DC	E-UTRA-NR Dual Connectivity
EPC	Evolved Packet Core
IAB	Integrated Access and Backhaul
IMEISV	International Mobile station Equipment Identity and Software Version number
LMF	Location Management Function
NID	Network Identifier
NPN	Non-Public Network
NSSAI	Network Slice Selection Assistance Information
posSIB	Positioning SIB
PNI-NPN	Public Network Integrated NPN
RANAC	RAN Area Code
RIM	Remote Interference Management
RIM-RS	RIM Reference Signal
RRC	Radio Resource Control
RSRP	Reference Signal Received Power
SNPN	Stand-alone Non-Public Network
S-NSSAI	Single Network Slice Selection Assistance Information
SUL	Supplementary Uplink
TAC	Tracking Area Code
TAI	Tracking Area Identity
TRP	Transmission-Reception Point
UL-AoA	Uplink Angle of Arrival 
UL-RTOA	Uplink Relative Time of Arrival
UL-SRS	Uplink Sounding Reference Signal
Z-AoA	Zenith Angles of Arrival
4	General
4.1	Procedure specification principles
The principle for specifying the procedure logic is to specify the functional behaviour of the terminating node exactly and completely. Any rule that specifies the behaviour of the originating node shall be possible to be verified with information that is visible within the system.
The following specification principles have been applied for the procedure text in clause 8:
-	The procedure text discriminates between:
1)	Functionality which "shall" be executed.
	The procedure text indicates that the receiving node "shall" perform a certain function Y under a certain condition. If the receiving node supports procedure X but cannot perform functionality Y requested in the REQUEST message of a Class 1 EP, the receiving node shall respond with the message used to report unsuccessful outcome for this procedure, containing an appropriate cause value.
2)	Functionality which "shall, if supported" be executed.
	The procedure text indicates that the receiving node "shall, if supported," perform a certain function Y under a certain condition. If the receiving node supports procedure X, but does not support functionality Y, the receiving node shall proceed with the execution of the EP, possibly informing the requesting node about the not supported functionality.
-	Any required inclusion of an optional IE in a response message is explicitly indicated in the procedure text. If the procedure text does not explicitly indicate that an optional IE shall be included in a response message, the optional IE shall not be included. For requirements on including Criticality Diagnostics IE, see clause 10.
4.2	Forwards and backwards compatibility
The forwards and backwards compatibility of the protocol is assured by mechanism where all current and future messages, and IEs or groups of related IEs, include ID and criticality fields that are coded in a standard format that will not be changed in the future. These parts can always be decoded regardless of the standard version.
4.3	Specification notations
For the purposes of the present document, the following notations apply:
Procedure	When referring to an elementary procedure in the specification the Procedure Name is written with the first letters in each word in upper case characters followed by the word "procedure", e.g. Handover Preparation procedure.
Message	When referring to a message in the specification the MESSAGE NAME is written with all letters in upper case characters followed by the word "message", e.g. HANDOVER REQUEST message.
IE	When referring to an information element (IE) in the specification the Information Element Name is written with the first letters in each word in upper case characters and all letters in Italic font followed by the abbreviation "IE", e.g. E-RAB ID IE.
Value of an IE	When referring to the value of an information element (IE) in the specification the "Value" is written as it is specified in the specification enclosed by quotation marks, e.g. "Value".
5	F1AP services
F1AP provides the signalling service between gNB-DU and the gNB-CU that is required to fulfil the F1AP functions described in clause 7. F1AP services are divided into two groups:
Non UE-associated services:	They are related to the whole F1 interface instance between the gNB-DU and gNB-CU utilising a non UE-associated signalling connection.
UE-associated services:	They are related to one UE. F1AP functions that provide these services are associated with a UE-associated signalling connection that is maintained for the UE in question.
Unless explicitly indicated in the procedure specification, at any instance in time one protocol endpoint shall have a maximum of one ongoing F1AP procedure related to a certain UE.
All considerations of gNB-DU in this specification also apply to the IAB-DU and IAB-donor-DU, unless stated otherwise. All considerations of gNB-CU in this specification apply to the IAB-donor-CU as well, unless stated otherwise.
6	Services expected from signalling transport
The signalling connection shall provide in sequence delivery of F1AP messages. F1AP shall be notified if the signalling connection breaks.
7	Functions of F1AP
The functions of F1AP are described in TS 38.470 [2].
8	F1AP procedures
8.1	List of F1AP Elementary procedures
In the following tables, all EPs are divided into Class 1 and Class 2 EPs (see subclause 3.1 for explanation of the different classes):
Table 1: Class 1 procedures
Elementary Procedure
Initiating Message
Successful Outcome
Unsuccessful Outcome



Response message
Response message

Reset
RESET
RESET ACKNOWLEDGE


F1 Setup
F1 SETUP REQUEST
F1 SETUP RESPONSE
F1 SETUP FAILURE

gNB-DU Configuration Update
GNB-DU CONFIGURATION UPDATE
GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE
GNB-DU CONFIGURATION UPDATE FAILURE

gNB-CU Configuration Update
GNB-CU CONFIGURATION UPDATE
GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE
GNB-CU CONFIGURATION UPDATE FAILURE

UE Context Setup
UE CONTEXT SETUP REQUEST
UE CONTEXT SETUP RESPONSE
UE CONTEXT SETUP FAILURE

UE Context Release (gNB-CU initiated)
UE CONTEXT RELEASE COMMAND
UE CONTEXT RELEASE COMPLETE


UE Context Modification (gNB-CU initiated)
UE CONTEXT MODIFICATION REQUEST
UE CONTEXT MODIFICATION RESPONSE
UE CONTEXT MODIFICATION FAILURE

UE Context Modification Required (gNB-DU initiated)
UE CONTEXT MODIFICATION REQUIRED
UE CONTEXT MODIFICATION CONFIRM
UE CONTEXT MODIFICATION REFUSE

Write-Replace Warning 
WRITE-REPLACE WARNING REQUEST
WRITE-REPLACE WARNING RESPONSE


PWS Cancel
PWS CANCEL REQUEST
PWS CANCEL RESPONSE


gNB-DU Resource Coordination
GNB-DU RESOURCE COORDINATION REQUEST
GNB-DU RESOURCE COORDINATION RESPONSE


F1 Removal
F1 REMOVAL REQUEST
F1 REMOVAL RESPONSE
F1 REMOVAL FAILURE


BAP Mapping Configuration
BAP MAPPING CONFIGURATION 
BAP MAPPING CONFIGURATION ACKNOWLEDGE
BAP MAPPING CONFIGURATION FAILURE

GNB-DU Resource Configuration
GNB-DU RESOURCE CONFIGURATION
GNB-DU RESOURCE CONFIGURATION ACKNOWLEDGE
GNB-DU RESOURCE CONFIGURATION FAILURE

IAB TNL Address Allocation
IAB TNL ADDRESS REQUEST
IAB TNL ADDRESS RESPONSE
IAB TNL ADDRESS FAILURE

IAB UP Configuration Update
IAB UP CONFIGURATION UPDATE REQUEST
IAB UP CONFIGURATION UPDATE RESPONSE
IAB UP CONFIGURATION UPDATE FAILURE

Resource Status Reporting Initiation
RESOURCE STATUS REQUEST
RESOURCE STATUS RESPONSE
RESOURCE STATUS FAILURE

Positioning Measurement
POSITIONING MEASUREMENT REQUEST
POSITIONING MEASUREMENT RESPONSE
POSITIONING MEASUREMENT FAILURE

Positioning Information Exchange
POSITIONING INFORMATION REQUEST
POSITIONING INFORMATION RESPONSE
POSITIONING INFORMATION FAILURE

TRP Information Exchange
TRP INFORMATION REQUEST
TRP INFORMATION RESPONSE
TRP INFORMATION FAILURE

Positioning Activation
POSITIONING ACTIVATION REQUEST
POSITIONING ACTIVATION RESPONSE
POSITIONING ACTIVATION FAILURE

E-CID Measurement Initiation
E-CID MEASUREMENT INITIATION REQUEST
E-CID MEASUREMENT INITIATION RESPONSE
E-CID MEASUREMENT INITIATION FAILURE

Table 2: Class 2 procedures
Elementary Procedure
Message

Error Indication
ERROR INDICATION

UE Context Release Request (gNB-DU initiated)
UE CONTEXT RELEASE REQUEST

Initial UL RRC Message Transfer
INITIAL UL RRC MESSAGE TRANSFER

DL RRC Message Transfer
DL RRC MESSAGE TRANSFER

UL RRC Message Transfer
UL RRC MESSAGE TRANSFER

UE Inactivity Notification 
UE INACTIVITY NOTIFICATION

System Information Delivery
SYSTEM INFORMATION DELIVERY COMMAND

Paging
PAGING

Notify
NOTIFY

PWS Restart Indication
PWS RESTART INDICATION

PWS Failure Indication
PWS FAILURE INDICATION

gNB-DU Status Indication
GNB-DU STATUS INDICATION

RRC Delivery Report
RRC DELIVERY REPORT

Network Access Rate Reduction
NETWORK ACCESS RATE REDUCTION


Trace Start
TRACE START

Deactivate Trace
DEACTIVATE TRACE
DU-CU Radio Information Transfer
DU-CU RADIO INFORMATION TRANSFER

CU-DU Radio Information Transfer
CU-DU RADIO INFORMATION TRANSFER

Resource Status Reporting
RESOURCE STATUS UPDATE

Access And Mobility Indication
ACCESS AND MOBILITY INDICATION


Reference Time Information Reporting Control
REFERENCE TIME INFORMATION REPORTING CONTROL

Reference Time Information Report
REFERENCE TIME INFORMATION REPORT

Access Success
ACCESS SUCCESS
Cell Traffic Trace
CELL TRAFFIC TRACE

Positioning Assistance Information Control
POSITIONING ASSISTANCE INFORMATION CONTROL

Positioning Assistance Information Feedback
POSITIONING ASSISTANCE INFORMATION FEEDBACK

Positioning Measurement Report
POSITIONING MEASUREMENT REPORT

Positioning Measurement Abort
POSITIONING MEASUREMENT ABORT

Positioning Measurement Failure Indication
POSITIONING MEASUREMENT FAILURE INDICATION

Positioning Measurement Update
POSITIONING MEASUREMENT UPDATE

Positioning Deactivation
POSITIONING DEACTIVATION

E-CID Measurement Failure Indication
E-CID MEASUREMENT FAILURE INDICATION

E-CID Measurement Report
E-CID MEASUREMENT REPORT

E-CID Measurement Termination
E-CID MEASUREMENT TERMINATION COMMAND

Positioning Information Update
POSITIONING INFORMATION UPDATE


8.2	Interface Management procedures
8.2.1	Reset
8.2.1.1	General
The purpose of the Reset procedure is to initialise or re-initialise the F1AP UE-related contexts, in the event of a failure in the gNB-CU or gNB-DU. This procedure does not affect the application level configuration data exchanged during, e.g., the F1 Setup procedure.
The procedure uses non-UE associated signalling.
8.2.1.2	Successful Operation
8.2.1.2.1	Reset Procedure Initiated from the gNB-CU

Figure 8.2.1.2.1-1: Reset procedure initiated from the gNB-CU. Successful operation
In the event of a failure at the gNB-CU, which has resulted in the loss of some or all transaction reference information, a RESET message shall be sent to the gNB-DU.
At reception of the RESET message the gNB-DU shall release all allocated resources on F1 and radio resources related to the UE association(s) indicated explicitly or implicitly in the RESET message and remove the indicated UE contexts including F1AP ID.
After the gNB-DU has released all assigned F1 resources and the UE F1AP IDs for all indicated UE associations which can be used for new UE-associated logical F1-connections over the F1 interface, the gNB-DU shall respond with the RESET ACKNOWLEDGE message. The gNB-DU does not need to wait for the release of radio resources to be completed before returning the RESET ACKNOWLEDGE message.
If the RESET message contains the UE-associated logical F1-connection list IE, then:
-	The gNB-DU shall use the gNB-CU UE F1AP ID IE and/or the gNB-DU UE F1AP ID IE to explicitly identify the UE association(s) to be reset.
-	The gNB-DU shall include in the RESET ACKNOWLEDGE message, for each UE association to be reset, the UE-associated logical F1-connection Item IE in the UE-associated logical F1-connection list IE. The UE-associated logical F1-connection Item IEs shall be in the same order as received in the RESET message and shall include also unknown UE-associated logical F1-connections. Empty UE-associated logical F1-connection Item IEs, received in the RESET message, may be omitted in the RESET ACKNOWLEDGE message.
-	If the gNB-CU UE F1AP ID IE is included in the UE-associated logical F1-connection Item IE for a UE association, the gNB-DU shall include the gNB-CU UE F1AP ID IE in the corresponding UE-associated logical F1-connection Item IE in the RESET ACKNOWLEDGE message.
-	If the gNB-DU UE F1AP ID IE is included in the UE-associated logical F1-connection Item IE for a UE association, the gNB-DU shall include the gNB-DU UE F1AP ID IE in the corresponding UE-associated logical F1-connection Item IE in the RESET ACKNOWLEDGE message.
Interactions with other procedures:
If the RESET message is received, any other ongoing procedure (except for another Reset procedure) on the same F1 interface related to a UE association, indicated explicitly or implicitly in the RESET message, shall be aborted.
8.2.1.2.2	Reset Procedure Initiated from the gNB-DU

Figure 8.2.1.2.2-1: Reset procedure initiated from the gNB-DU. Successful operation
In the event of a failure at the gNB-DU, which has resulted in the loss of some or all transaction reference information, a RESET message shall be sent to the gNB-CU.
At reception of the RESET message the gNB-CU shall release all allocated resources on F1 related to the UE association(s) indicated explicitly or implicitly in the RESET message and remove the F1AP ID for the indicated UE associations.
After the gNB-CU has released all assigned F1 resources and the UE F1AP IDs for all indicated UE associations which can be used for new UE-associated logical F1-connections over the F1 interface, the gNB-CU shall respond with the RESET ACKNOWLEDGE message.
If the RESET message contains the UE-associated logical F1-connection list IE, then:
-	The gNB-CU shall use the gNB-CU UE F1AP ID IE and/or the gNB-DU UE F1AP ID IE to explicitly identify the UE association(s) to be reset.
-	The gNB-CU shall in the RESET ACKNOWLEDGE message include, for each UE association to be reset, the UE-associated logical F1-connection Item IE in the UE-associated logical F1-connection list IE. The UE-associated logical F1-connection Item IEs shall be in the same order as received in the RESET message and shall include also unknown UE-associated logical F1-connections. Empty UE-associated logical F1-connection Item IEs, received in the RESET message, may be omitted in the RESET ACKNOWLEDGE message.
-	If the gNB-CU UE F1AP ID IE is included in the UE-associated logical F1-connection Item IE for a UE association, the gNB-CU shall include the gNB-CU UE F1AP ID IE in the corresponding UE-associated logical F1-connection Item IE in the RESET ACKNOWLEDGE message.
-	If the gNB-DU UE F1AP ID IE is included in a UE-associated logical F1-connection Item IE for a UE association, the gNB-CU shall include the gNB-DU UE F1AP ID IE in the corresponding UE-associated logical F1-connection Item IE in the RESET ACKNOWLEDGE message.
Interactions with other procedures:
If the RESET message is received, any other ongoing procedure (except for another Reset procedure) on the same F1 interface related to a UE association, indicated explicitly or implicitly in the RESET message, shall be aborted.
8.2.1.3	Abnormal Conditions
Not applicable.
8.2.2	Error Indication
8.2.2.1	General
The Error Indication procedure is initiated by a node in order to report detected errors in one incoming message, provided they cannot be reported by an appropriate failure message.
If the error situation arises due to reception of a message utilising UE associated signalling, then the Error Indication procedure uses UE associated signalling. Otherwise the procedure uses non-UE associated signalling.
8.2.2.2	Successful Operation

Figure 8.2.2.2-1: Error Indication procedure, gNB-CU originated. Successful operation


Figure 8.2.2.2-2: Error Indication procedure, gNB-DU originated. Successful operation
When the conditions defined in clause 10 are fulfilled, the Error Indication procedure is initiated by an ERROR INDICATION message sent from the receiving node.
The ERROR INDICATION message shall contain at least either the Cause IE or the Criticality Diagnostics IE. In case the Error Indication procedure is triggered by utilising UE associated signalling the gNB-CU UE F1AP ID IE and gNB-DU UE F1AP ID IE shall be included in the ERROR INDICATION message. If one or both of the gNB-CU UE F1AP ID IE and the gNB-DU UE F1AP ID IE are not correct, the cause shall be set to appropriate value, e.g., "Unknown or already allocated gNB-CU UE F1AP ID", "Unknown or already allocated gNB-DU UE F1AP ID" or "Unknown or inconsistent pair of UE F1AP ID".
8.2.2.3	Abnormal Conditions 
Not applicable.
8.2.3	F1 Setup 
8.2.3.1	General
The purpose of the F1 Setup procedure is to exchange application level data needed for the gNB-DU and the gNB-CU to correctly interoperate on the F1 interface. This procedure shall be the first F1AP procedure triggered for the F1-C interface instance after a TNL association has become operational.
NOTE:	If F1-C signalling transport is shared among multiple F1-C interface instances, one F1 Setup procedure is issued per F1-C interface instance to be setup, i.e. several F1 Setup procedures may be issued via the same TNL association after that TNL association has become operational.
NOTE:	Exchange of application level configuration data also applies between the gNB-DU and the gNB-CU in case the DU does not broadcast system information other than for radio frame timing and SFN, as specified in the TS 37.340 [8]. How to use this information when this option is used is not explicitly specified.
The procedure uses non-UE associated signalling.
This procedure erases any existing application level configuration data in the two nodes and replaces it by the one received. This procedure also re-initialises the F1AP UE-related contexts (if any) and erases all related signalling connections in the two nodes like a Reset procedure would do. 
8.2.3.2	Successful Operation

Figure 8.2.3.2-1: F1 Setup procedure: Successful Operation
The gNB-DU initiates the procedure by sending a F1 SETUP REQUEST message including the appropriate data to the gNB-CU. The gNB-CU responds with a F1 SETUP RESPONSE message including the appropriate data.
The exchanged data shall be stored in respective node and used as long as there is an operational TNL association. When this procedure is finished, the F1 interface is operational and other F1 messages may be exchanged.
If the F1 SETUP REQUEST message contains the gNB-DU Name IE, the gNB-CU may use this IE as a human readable name of the gNB-DU. If the F1 SETUP REQUEST message contains the Extended gNB-DU Name IE, the gNB-CU may use this IE as a human readable name of the gNB-DU and shall ignore the gNB-DU Name IE if included.
If the F1 SETUP RESPONSE message contains the gNB-CU Name IE, the gNB-DU may use this IE as a human readable name of the gNB-CU. If the F1 SETUP RESPONSE message contains the Extended gNB-CU Name IE, the gNB-DU may use this IE as a human readable name of the gNB-CU and shall ignore the gNB-CU Name IE if included.
If the F1 SETUP REQUEST message contains the gNB-DU Served Cells List IE, the gNB-CU shall take into account as specified in TS 38.401 [4].
For NG-RAN, the gNB-DU shall include the gNB-DU System Information IE and the TAI Slice Support List IE in the F1 SETUP REQUEST message.
The gNB-CU may include the Cells to be Activated List IE in the F1 SETUP RESPONSE message. The Cells to be Activated List IE includes a list of cells that the gNB-CU requests the gNB-DU to activate. The gNB-DU shall activate the cells included in the Cells to be Activated List IE and reconfigure the physical cell identity for cells for which the NR PCI IE is included. 
If Cells to be Activated List Item IE is included in the F1 SETUP RESPONSE message, and the information for the cell indicated by the NR CGI IE includes the IAB Info IAB-donor-CU IE, the gNB-DU shall, if supported, apply the IAB STC Info IE therein to the indicated cell.
For NG-RAN, the gNB-CU shall include the gNB-CU System Information IE in the F1 SETUP RESPONSE message.
For NG-RAN, the gNB-DU may include the RAN Area Code IE in the F1 SETUP REQUEST message. The gNB-CU may use it according to TS 38.300 [6].
For NG-RAN, the gNB-CU may include Available PLMN List IE, and optionally also Extended Available PLMN List IE in the F1 SETUP RESPONSE message, if the available PLMN(s) are different from what gNB-DU has provided in F1 SETUP REQUEST message, gNB-DU shall take this into account and only broadcast the PLMN(s) included in the received Available PLMN list(s). 
For NG-RAN, the gNB-CU may include Available SNPN ID List IE in the F1 SETUP RESPONSE message. If the available SNPN(s) are different from what gNB-DU has provided in F1 SETUP REQUEST message, gNB-DU shall take this into account and only broadcast the SNPN(s) included in the received Available SNPN ID list.
The Latest RRC Version Enhanced IE shall be included in the F1 SETUP REQUEST message and in the F1 SETUP RESPONSE message.
If in F1 SETUP REQUEST message, the Cell Direction IE is present, the gNB-CU should use it to understand whether the cell is for UL or DL only. If in F1 SETUP REQUEST message, the Cell Direction IE is omitted in the Served Cell Information IE it shall be interpreted as that the Cell Direction is Bi-directional.
If the Intended TDD DL-UL Configuration IE is present in the F1 SETUP REQUEST message, the receiving gNB-CU shall use the received information for Cross Link Interference management and/or NR-DC power coordination. The gNB-CU may merge the Intended TDD DL-UL Configuration information received from two or more gNB-DUs. The gNB-CU shall consider the received Intended TDD DL-UL Configuration content valid until reception of an update of the IE for the same cell(s).
If the Aggressor gNB Set ID IE is included in the Served Cell Information IE in the F1 SETUP REQUEST message, the gNB-CU shall, if supported, take it into account.
If the Victim gNB Set ID IE is included in the Served Cell Information IE in the F1 SETUP REQUEST message, the gNB-CU shall, if supported, take it into account.
If the F1 SETUP REQUEST message contains the Transport Layer Address Info IE, the gNB-CU shall, if supported, take into account for IPSec tunnel establishment.
If the SFN Offset IE is contained in the Served Cell Information IE in the F1 SETUP REQUEST message, the gNB-CU shall, if supported, use this information to deduce the SFN0 offset of the reported cell.
If the F1 SETUP RESPONSE message contains the Transport Layer Address Info IE, the gNB-DU shall, if supported, take into account for IPSec tunnel establishment.
If the F1 SETUP RESPONSE message contains the Uplink BH Non-UP Traffic Mapping IE, the gNB-DU shall, if supported, consider the information therein for mapping of non-UP uplink traffic.
If the BAP Address IE is included in the F1 SETUP REQUEST, the receiving gNB-CU shall, if supported, consider the information therein for discovering the collocation of an IAB-DU and an IAB-MT.
If the F1 SETUP REQUEST message is received from an IAB-donor-DU, the gNB-CU shall, if supported, include the BAP Address IE in the F1 SETUP RESPONSE message. 
NOTE:	How to identify the IAB-donor-DU is up to gNB-CU implementation.
If the F1 SETUP RESPONSE message contains the BAP Address IE, the gNB-DU shall, if supported, store the received BAP address and use it as specified in TS 38.340 [30].
If the NR Cell PRACH Configuration IE is included in the Served Cell Information IE contained in the F1 SETUP REQUEST message, the gNB-CU may store the information, and forward it to other RAN nodes for RACH optimisation.
8.2.3.3	Unsuccessful Operation

Figure 8.2.3.3-1: F1 Setup procedure: Unsuccessful Operation
If the gNB-CU cannot accept the setup, it should respond with a F1 SETUP FAILURE and appropriate cause value.
If the F1 SETUP FAILURE message includes the Time To Wait IE, the gNB-DU shall wait at least for the indicated time before reinitiating the F1 setup towards the same gNB-CU.
8.2.3.4	Abnormal Conditions
Not applicable.
8.2.4	gNB-DU Configuration Update
8.2.4.1	General
The purpose of the gNB-DU Configuration Update procedure is to update application level configuration data needed for the gNB-DU and the gNB-CU to interoperate correctly on the F1 interface. This procedure does not affect existing UE-related contexts, if any. The procedure uses non-UE associated signalling.
NOTE:	Update of application level configuration data also applies between the gNB-DU and the gNB-CU in case the DU does not broadcast system information other than for radio frame timing and SFN, as specified in the TS 37.340 [8]. How to use this information when this option is used is not explicitly specified.
8.2.4.2	Successful Operation

Figure 8.2.4.2-1: gNB-DU Configuration Update procedure: Successful Operation
The gNB-DU initiates the procedure by sending a GNB-DU CONFIGURATION UPDATE message to the gNB-CU including an appropriate set of updated configuration data that it has just taken into operational use. The gNB-CU responds with GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message to acknowledge that it successfully updated the configuration data. If an information element is not included in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall interpret that the corresponding configuration data is not changed and shall continue to operate the F1-C interface with the existing related configuration data.
The updated configuration data shall be stored in both nodes and used as long as there is an operational TNL association or until any further update is performed.
If gNB-DU ID IE is contained in the GNB-DU CONFIGURATION UPDATE message for a newly established SCTP association, the gNB-CU will associate this association with the related gNB-DU.
If Served Cells To Add Item IE is contained in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall add cell information according to the information in the Served Cell Information IE. For NG-RAN, the gNB-DU shall include the gNB-DU System Information IE.
If Served Cells To Modify Item IE is contained in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall modify information of cell indicated by Old NR CGI IE according to the information in the Served Cell Information IE and overwrite the served cell information for the affected served cell. Further, if the gNB-DU System Information IE is present the gNB-CU shall store and replace any previous information received.
If Served Cells To Delete Item IE is contained in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall delete information of cell indicated by Old NR CGI IE.
If Cells Status Item IE is contained in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall update the information about the cells, as described in TS 38.401 [4]. If if the Switching Off Ongoing IE is present in the Cells Status Item IE, contained in the GNB-DU CONFIGURATION UPDATE message, and the corresponding Service State IE is set to "Out-of-Service", the gNB-CU shall ignore the Switching Off Ongoing IE.
If Cells to be Activated List Item IE is contained in the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message, the gNB-DU shall activate the cell indicated by NR CGI IE and reconfigure the physical cell identity for cells for which the NR PCI IE is included.
If Cells to be Activated List Item IE is contained in the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message and the indicated cells are already activated, the gNB-DU shall update the cell information received in Cells to be Activated List Item IE.
If Cells to be Activated List Item IE is included in the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message, and the information for the cell indicated by the NR CGI IE includes the IAB Info IAB-donor-CU IE, the gNB-DU shall, if supported, apply the IAB STC Info IE therein to the indicated cell.
If Cells to be Deactivated List Item IE is contained in the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message, the gNB-DU shall deactivate all the cells with NR CGI listed in the IE.
If Dedicated SI Delivery Needed UE List IE is contained in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU should take it into account when informing the UE of the updated system information via the dedicated RRC message.
For NG-RAN, the gNB-CU shall include the gNB-CU System Information IE in the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message. The SIB type to Be Updated List IE shall contain the full list of SIBs to be broadcast.
For NG-RAN, the gNB-DU may include the RAN Area Code IE in the GNB-DU CONFIGURATION UPDATE message. The gNB-CU shall store and replace any previously provided RAN Area Code IE by the received RAN Area Code IE.
If Available PLMN List IE, and optionally also Extended Available PLMN List IE, is contained in GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message, the gNB-DU shall overwrite the whole available PLMN list and update the corresponding system information. 
If Available SNPN ID List IE is contained in GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message, the gNB-DU shall overwrite the whole available SNPN ID list and update the corresponding system information.
If in GNB-DU CONFIGURATION UPDATE message, the Cell Direction IE is present, the gNB-CU should use it to understand whether the cell is for UL or DL only. If in GNB-DU CONFIGURATION UPDATE message, the Cell Direction IE is omitted in the Served Cell Information IE it shall be interpreted as that the Cell Direction is Bi-directional.
If the GNB-DU CONFIGURATION UPDATE message includes gNB-DU TNL Association To Remove List IE, and the Endpoint IP address IE and the Port Number IE for both TNL endpoints of the TNL association(s) are included in the gNB-DU TNL Association To Remove List IE, the gNB-CU shall, if supported, consider that the TNL association(s) indicated by both received TNL endpoints will be removed by the gNB-DU. If the Endpoint IP address IE, or the Endpoint IP address IE and the Port Number IE for one or both of the TNL endpoints is included in the gNB-DU TNL Association To Remove List IE in GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall, if supported, consider that the TNL association(s) indicated by the received endpoint IP address(es) will be removed by the gNB-DU.
If the Intended TDD DL-UL Configuration IE is present in the GNB-DU CONFIGURATION UPDATE message, the receiving gNB-CU shall use the received information for Cross Link Interference management and/or NR-DC power coordination. The gNB-CU may merge the Intended TDD DL-UL Configuration information received from two or more gNB-DUs. The gNB-CU shall consider the received Intended TDD DL-UL Configuration IE content valid until reception of an update of the IE for the same cell(s).
If the Aggressor gNB Set ID IE is included in the Served Cell Information IE in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall, if supported, take it into account.
If the Victim gNB Set ID IE is included in the Served Cell Information IE in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall, if supported, take it into account.
If the GNB-DU CONFIGURATION UPDATE message includes Transport Layer Address Info IE, the gNB-CU shall, if supported, take into account for IPSec tunnel establishment.
If the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message includes Transport Layer Address Info IE, the gNB-DU shall, if supported, take into account for IPSec tunnel establishment.
If the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message contains the Uplink BH Non-UP Traffic Mapping IE, the gNB-DU shall, if supported, consider the information therein for mapping of non-UP uplink traffic.
If the SFN Offset IE is contained in the Served Cell Information IE in GNB-DU CONFIGURATION UPDATE message, the gNB-CU shall, if supported, use this information to deduce the SFN0 offset of the reported cell.
If the NR Cell PRACH Configuration IE is included in the Served Cell Information IE contained in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU may store the information, and forward it to other RAN nodes for RACH optimisation.
If the GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE message contains the BAP Address IE, the gNB-DU shall, if supported, store the received BAP address and use it as specified in TS 38.340 [30].
If the gNB-DU Name IE is included in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU may store it or update this IE value if already stored, and use it as a human readable name of the gNB-DU. If the Extended gNB-DU Name IE is included in the GNB-DU CONFIGURATION UPDATE message, the gNB-CU may store it or update this IE value if already stored, and use it as a human readable name of the gNB-DU and shall ignore the gNB-DU Name IE if also included.
8.2.4.3	Unsuccessful Operation

Figure 8.2.4.3-1: gNB-DU Configuration Update procedure: Unsuccessful Operation
If the gNB-CU cannot accept the update, it shall respond with a GNB-DU CONFIGURATION UPDATE FAILURE message and appropriate cause value. 
If the GNB-DU CONFIGURATION UPDATE FAILURE message includes the Time To Wait IE, the gNB-DU shall wait at least for the indicated time before reinitiating the GNB-DU CONFIGURATION UPDATE message towards the same gNB-CU.
8.2.4.4	Abnormal Conditions
 Not applicable.
8.2.5	gNB-CU Configuration Update 
8.2.5.1	General
The purpose of the gNB-CU Configuration Update procedure is to update application level configuration data needed for the gNB-DU and gNB-CU to interoperate correctly on the F1 interface. This procedure does not affect existing UE-related contexts, if any. The procedure uses non-UE associated signalling.
8.2.5.2	Successful Operation

Figure 8.2.5.2-1: gNB-CU Configuration Update procedure: Successful Operation
The gNB-CU initiates the procedure by sending a GNB-CU CONFIGURATION UPDATE message including the appropriate updated configuration data to the gNB-DU. The gNB-DU responds with a GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE message to acknowledge that it successfully updated the configuration data. If an information element is not included in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall interpret that the corresponding configuration data is not changed and shall continue to operate the F1-C interface with the existing related configuration data.
The updated configuration data shall be stored in the respective node and used as long as there is an operational TNL association or until any further update is performed.
If Cells to be Activated List Item IE is contained in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall activate the cell indicated by NR CGI IE and reconfigure the physical cell identity for which the NR PCI IE is included.
If Cells to be Deactivated List Item IE is contained in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall deactivate the cell indicated by NR CGI IE.
If Cells to be Activated List Item IE is contained in the GNB-CU CONFIGURATION UPDATE message and the indicated cells are already activated, the gNB-DU shall update the cell information received in Cells to be Activated List Item IE.
If Cells to be Activated List Item IE is included in the GNB-CU CONFIGURATION UPDATE message, and the information for the cell indicated by the NR CGI IE includes the IAB Info IAB-donor-CU IE, the gNB-DU shall, if supported, apply the IAB STC Info IE therein to the indicated cell.
If the gNB-CU System Information IE is contained in the gNB-CU CONFIGURATION UPDATE message, the gNB-DU shall include the Dedicated SI Delivery Needed UE List IE in the GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE message for UEs that are unable to receive system information from broadcast.
If Dedicated SI Delivery Needed UE List IE is contained in the GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE message, the gNB-CU should take it into account when informing the UE of the updated system information via the dedicated RRC message.
If the gNB-CU TNL Association To Add List IE is contained in the gNB-CU CONFIGURATION UPDATE message, the gNB-DU shall, if supported, use it to establish the TNL association(s) with the gNB-CU. The gNB-DU shall report to the gNB-CU, in the gNB-CU CONFIGURATION UPDATE ACKNOWLEDGE message, the successful establishment of the TNL association(s) with the gNB-CU as follows:
-	A list of TNL address(es) with which the gNB-DU successfully established the TNL association shall be included in the gNB-CU TNL Association Setup List IE;
-	A list of TNL address(es) with which the gNB-DU failed to establish the TNL association shall be included in the gNB-CU TNL Association Failed To Setup List IE.
If the GNB-CU CONFIGURATION UPDATE message includes gNB-CU TNL Association To Remove List IE, and the Endpoint IP address IE and the Port Number IE for both TNL endpoints of the TNL association(s) are included in the gNB-CU TNL Association To Remove List IE, the gNB-DU shall, if supported, initiate removal of the TNL association(s) indicated by both received TNL endpoints towards the gNB-CU. If the Endpoint IP address IE, or the Endpoint IP address IE and the Port Number IE for one or both of the TNL endpoints is included in the gNB-CU TNL Association To Remove List IE, the gNB-DU shall, if supported, initiate removal of the TNL association(s) indicated by the received endpoint IP address(es).
If the gNB-CU TNL Association To Update List IE is contained in the gNB-CU CONFIGURATION UPDATE message the gNB-DU shall, if supported, overwrite the previously stored information for the related TNL Association(s). 
If in the gNB-CU CONFIGURATION UPDATE message the TNL Association usage IE is included in the gNB-CU TNL Association To Add List IE or the gNB-CU TNL Association To Update List IE, the gNB-DU node shall, if supported, use it as described in TS 38.472 [22].
For NG-RAN, the gNB-CU shall include the gNB-CU System Information IE in the GNB-CU CONFIGURATION UPDATE message. The SIB type to Be Updated List IE shall contain the full list of SIBs to be broadcast.
If Protected E-UTRA Resources List IE is contained in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall protect the corresponding resource of the cells indicated by E-UTRA Cells List IE for spectrum sharing between E-UTRA and NR.
If the GNB-CU CONFIGURATION UPDATE message contains the Protected E-UTRA Resource Indication IE, the receiving gNB-DU should forward it to lower layers and use it for cell-level resource coordination. The gNB-DU shall consider the received Protected E-UTRA Resource Indication IE when expressing its desired resource allocation during gNB-DU Resource Coordination procedure. The gNB-DU shall consider the received Protected E-UTRA Resource Indication IE content valid until reception of a new update of the IE for the same gNB-DU.
If Available PLMN List IE, and optionally also Extended Available PLMN List IE, is contained in GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall overwrite the whole available PLMN list and update the corresponding system information. 
If Available SNPN ID List IE is contained in GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall overwrite the whole available SNPN ID list and update the corresponding system information.
If Cells Failed to be Activated Item IE is contained in the GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE message, the gNB-CU shall consider that the indicated cells are out-of-service as defined in TS 38.401 [4].
If the Neighbour Cell Information List IE is present in the GNB-CU CONFIGURATION UPDATE message, the receiving gNB-DU shall use the received information for Cross Link Interference management and/or NR-DC power coordination. The gNB-DU shall consider the received Neighbour Cell Information List IE content valid until reception of an update of the IE for the same cell(s). If the Intended TDD DL-UL Configuration NR IE is absent from the Neighbour Cell Information List IE, whereas the corresponding NR CGI IE is present, the receiving gNB-DU shall remove the previously stored Neighbour Cell Information IE corresponding to the NR CGI.
If the GNB-CU CONFIGURATION UPDATE message includes Transport Layer Address Info IE, the gNB-DU shall, if supported, take into account for IPSec tunnel establishment.
If the GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE message includes Transport Layer Address Info IE, the gNB-CU shall, if supported, take into account for IPSec tunnel establishment.
If the GNB-CU CONFIGURATION UPDATE message contains the Uplink BH Non-UP Traffic Mapping IE, the gNB-DU shall, if supported, consider the information therein for mapping of non-UP uplink traffic. 
If the IAB Barred IE is included in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall, if supported, consider it as an indication of whether the cell allows IAB-node access or not.
If the BAP Address IE is included in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU shall, if supported, store the received BAP address and use it as specified in TS 38.340 [30].
If the gNB-CU Name IE is included in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU may store it or update this IE value if already stored, and use it as a human readable name of the gNB-CU. If the Extended gNB-CU Name IE is included in the GNB-CU CONFIGURATION UPDATE message, the gNB-DU may store it or update this IE value if already stored, and use it as a human readable name of the gNB-CU and shall ignore the gNB-CU Name IE if also included.
8.2.5.3	Unsuccessful Operation

Figure 8.2.5.3-1: gNB-CU Configuration Update: Unsuccessful Operation
If the gNB-DU cannot accept the update, it shall respond with a GNB-CU CONFIGURATION UPDATE FAILURE message and appropriate cause value.
If the GNB-CU CONFIGURATION UPDATE FAILURE message includes the Time To Wait IE, the gNB-CU shall wait at least for the indicated time before reinitiating the GNB-CU CONFIGURATION UPDATE message towards the same gNB-DU.
8.2.5.4	Abnormal Conditions
Not applicable.
8.2.6	gNB-DU Resource Coordination
8.2.6.1	General
The purpose of the gNB-DU Resource Coordination procedure is to enable coordination of radio resource allocation between a gNB-CU and a gNB-DU for the purpose of spectrum sharing between E-UTRA and NR. This procedure is to be used only for the purpose of spectrum sharing between E-UTRA and NR.
The procedure uses non-UE-associated signalling.
8.2.6.2	Successful Operation

Figure 8.2.6.2-1: gNB-DU Resource Coordination, successful operation
A gNB-CU initiates the procedure by sending the GNB-DU RESOURCE COORDINATION REQUEST message to a gNB-DU over the F1 interface.
The gNB-DU extracts the E-UTRA – NR Cell Resource Coordination Request Container IE and it replies by sending the GNB-DU RESOURCE COORDINATION RESPONSE message.
In case of NR-initiated gNB-DU Resource Coordination procedure, the Ignore Coordination Request Container IE shall be present and set to "yes" and the E-UTRA – NR Cell Resource Coordination Request Container IE in the GNB-DU RESOURCE COORDINATION REQUEST message shall be ignored.
8.2.7	gNB-DU Status Indication
8.2.7.1	General
The purpose of the gNB-DU Status Indication procedure is informing the gNB-CU that the gNB-DU is overloaded so that overload reduction actions can be applied. The procedure uses non-UE associated signalling.
8.2.7.2	Successful Operation

Figure 8.2.7.2-1: gNB-DU Status Indication procedure
If the gNB-DU Overload Information IE in the GNB-DU STATUS INDICATION message indicates that the gNB-DU is overloaded, the gNB-CU shall apply overload reduction actions until informed, with a new GNB-DU STATUS INDICATION message, that the overload situation has ceased.
The detailed overload reduction policy is up to gNB-CU implementation.
8.2.7.3	Abnormal Conditions
Void.
8.2.8	F1 Removal
8.2.8.1	General
The purpose of the F1 Removal procedure is to remove the interface instance and all related resources between the gNB-DU and the gNB-CU in a controlled manner. If successful, this procedure erases any existing application level configuration data in the two nodes.
NOTE:	In case the signalling transport is shared among several F1-C interface instances, and the TNL association is still used by one or several F1-C interface instances, the initiating node should not initiate the removal of the TNL association.
The procedure uses non-UE-associated signaling.
8.2.8.2	Successful Operation

Figure 8.2.8-1: F1 Removal, gNB-DU initiated, successful operation

Figure 8.2.8.2-2: F1 Removal, gNB-CU initiated, successful operation
Successful F1 Removal, gNB-DU initiated
The gNB-DU initiates the procedure by sending the F1 REMOVAL REQUEST message to the gNB-CU. Upon reception of the F1 REMOVAL REQUEST message the gNB-CU shall reply with the F1 REMOVAL RESPONSE message. After receiving the F1 REMOVAL RESPONSE message, the gNB-DU may initiate removal of the TNL association towards the gNB-CU, if applicable, and may remove all resources associated with that interface instance. The gNB-CU may then remove all resources associated with that interface instance.
Successful F1 Removal, gNB-CU initiated
The gNB-CU initiates the procedure by sending the F1 REMOVAL REQUEST message to the gNB-DU. Upon reception of the F1 REMOVAL REQUEST message the gNB-DU shall reply with the F1 REMOVAL RESPONSE message. After receiving the F1 REMOVAL RESPONSE message, the gNB-CU may initiate removal of the TNL association towards the gNB-DU, if applicable, and may remove all resources associated with that interface instance. The gNB-DU may then remove all resources associated with that interface instance.
8.2.8.3	Unsuccessful Operation

Figure 8.2.8.3-1: F1 Removal, gNB-DU initiated, unsuccessful operation

Figure 8.2.8.3-2: F1 Removal, gNB-CU initiated, unsuccessful operation
Unsuccessful F1 Removal, gNB-DU initiated
If the gNB-CU cannot accept to remove the interface instance with the gNB-DU it shall respond with an F1 REMOVAL FAILURE message with an appropriate cause value.
Unsuccessful F1 Removal, gNB-CU initiated
If the gNB-DU cannot accept to remove the interface instance with the gNB-CU it shall respond with an F1 REMOVAL FAILURE message with an appropriate cause value.
8.2.8.4	Abnormal Conditions
Not applicable.
8.2.9	Network Access Rate Reduction
8.2.9.1	General
The purpose of the Network Access Rate Reduction procedure is to indicate to the gNB-DU that the rate at which UEs are accessing the network need to be reduced from its current level.
The procedure uses non-UE associated signalling.
8.2.9.2	Successful operation

Figure 8.2.9.2-1: Network Access Rate Reduction, Successful operation
The gNB-CU initiates the procedure by sending a NETWORK ACCESS RATE REDUCTION message to the gNB-DU. When receiving the NETWORK ACCESS RATE REDUCTION message the gNB-DU should take into account the information contained in the UAC assistance information to set the parameters for Unified Access Barring. 
If the NID IE is contained in the NETWORK ACCESS RATE REDUCTION message, the gNB-DU should take it into account and combine the NID IE with the PLMN Identity IE to identify the SNPN.
8.2.9.3	Abnormal Conditions
Not applicable
8.2.10	Resource Status Reporting Initiation
8.2.10.1	General
This procedure is used by an gNB-CU to request the reporting of load measurements to gNB-DU.
The procedure uses non UE-associated signalling.
8.2.10.2	Successful Operation

Figure 8.2.10.2-1: Resource Status Reporting Initiation, successful operation
gNB-CU initiates the procedure by sending the RESOURCE STATUS REQUEST message to gNB-DU to start a measurement, stop a measurement, or add cells to report for a measurement. Upon receipt, gNB-DU:
-	shall initiate the requested measurement according to the parameters given in the request in case the Registration Request IE set to "start"; or
-	shall stop all cells measurements and terminate the reporting in case the Registration Request IE is set to "stop"; or
-	shall add cells indicated in the Cell To Report List IE to the measurements initiated before for the given measurement IDs, in case the Registration Request IE is set to "add". If measurements are already initiated for a cell indicated in the Cell To Report List IE, this information shall be ignored.
If the Registration Request IE is set to "start" in the RESOURCE STATUS REQUEST message and the Report Characteristics IE indicates cell specific measurements, the Cell To Report List IE shall be included. 
If Registration Request IE is set to "add" in the RESOURCE STATUS REQUEST message, the Cell To Report List IE shall be included.
If gNB-DU is capable to provide all requested resource status information, it shall initiate the measurement as requested by gNB-CU, and respond with the RESOURCE STATUS RESPONSE message.
Interaction with other procedures
When starting a measurement, the Report Characteristics IE in the RESOURCE STATUS REQUEST indicates the type of objects gNB-DU shall perform measurements on. For each cell, gNB-DU shall include in the RESOURCE STATUS UPDATE message:
-	the Radio Resource Status IE, if the first bit, "PRB Periodic" of the Report Characteristics IE included in the RESOURCE STATUS REQUEST message is set to 1. If the cell for which Radio Resource Status IE is requested to be reported supports more than one SSB, the Radio Resource Status IE for such cell shall include the SSB Area Radio Resource Status Item IE for all SSB areas supported by the cell. If the SSB To Report List IE is included for a cell, the Radio Resource Status IE for such cell shall only include the SSB Area Radio Resource Status List IE; 
-	the TNL Capacity Indicator IE, if the second bit, "TNL Capacity Ind Periodic" of the Report Characteristics IE included in the RESOURCE STATUS REQUEST message is set to 1;
-	the Composite Available Capacity Group IE, if the third bit, "Composite Available Capacity Periodic" of the Report Characteristics IE included in the RESOURCE STATUS REQUEST message is set to 1. If Cell Capacity Class Value IE is included within the Composite Available Capacity Group IE, this IE is used to assign weights to the available capacity indicated in the Capacity Value IE. If the cell for which Composite Available Capacity Group IE is requested to be reported supports more than one SSB the Composite Available Capacity Group IE for such cell shall include the SSB Area Capacity Value List IE for all SSB areas supported by the cell, providing the SSB area capacity with respect to the Cell Capacity Class Value IE. If the SSB To Report List IE is included for a cell, the Composite Available Capacity Group IE for such cell shall include the requested SSB Area Capacity Value List IE providing the SSB area capacity with respect to the Cell Capacity Class Value. If the cell for which Composite Available Capacity Group IE is requested to be reported supports more than one slice, and if the Slice To Report List IE is included for a cell, the Slice Available Capacity IE for such cell shall include the requested Slice Available Capacity Value Downlink IE and Slice Available Capacity Value Uplink IE, providing the slice capacity with respect to the Cell Capacity Class Value.
-	the Hardware Load Indicator IE, if the fourth bit, " HW LoadInd Periodic " of the Report Characteristics IE included in the RESOURCE STATUS REQUEST message is set to 1;
-	the Number of Active UEs IE, if the fifth bit, "Number of Active UEs" of the Report Characteristics IE included in the RESOURCE STATUS REQUEST message is set to 1;
If the Reporting Periodicity IE in the RESOURCE STATUS REQUEST is present, this indicates the periodicity for the reporting of periodic measurements. The gNB-DU shall report once, unless otherwise requested within the Reporting Periodicity IE.
8.2.10.3	Unsuccessful Operation

Figure 8.2.10.3-1: Resource Status Reporting Initiation, unsuccessful operation
If any of the requested measurements cannot be initiated, gNB-DU shall send the RESOURCE STATUS FAILURE message with an appropriate cause value. 
8.2.10.4	Abnormal Conditions
If the initiating gNB-CU does not receive either RESOURCE STATUS RESPONSE message or RESOURCE STATUS FAILURE message, the gNB-CU may reinitiate the Resource Status Reporting Initiation procedure towards the same gNB-DU, provided that the content of the new RESOURCE STATUS REQUEST message is identical to the content of the previously unacknowledged RESOURCE STATUS REQUEST message with the same Transaction ID.
If the Report Characteristics IE bitmap is set to "0" (all bits are set to "0") in the RESOURCE STATUS REQUEST message then gNB-DU shall initiate a RESOURCE STATUS FAILURE message with an appropriate cause value.
If the gNB-DU receives a RESOURCE STATUS REQUEST message which includes the Registration Request IE set to "start" and the gNB-CU Measurement ID IE corresponding to an existing on-going load measurement reporting, for which a different Transaction ID is used, then gNB-DU shall initiate a RESOURCE STATUS FAILURE message with an appropriate cause value.
8.2.11	Resource Status Reporting
8.2.11.1	General
This procedure is initiated by gNB-DU to report the result of measurements admitted by gNB-DU following a successful Resource Status Reporting Initiation procedure.
The procedure uses non UE-associated signalling.
8.2.11.2	Successful Operation

Figure 8.2.11.2-1: Resource Status Reporting, successful operation
The gNB-DU shall report the results of the admitted measurements in RESOURCE STATUS UPDATE message. The admitted measurements are the measurements that were successfully initiated during the preceding Resource Status Reporting Initiation procedure.
8.2.11.3	Unsuccessful Operation
Not applicable.
8.2.11.4	Abnormal Conditions
Void.
8.3	UE Context Management procedures
8.3.1	UE Context Setup 
8.3.1.1	General
The purpose of the UE Context Setup procedure is to establish the UE Context including, among others, SRB,DRB, BH RLC channel, and SL DRB configuration. The procedure uses UE-associated signalling.
8.3.1.2	Successful Operation

Figure 8.3.1.2-1: UE Context Setup Request procedure: Successful Operation
The gNB-CU initiates the procedure by sending UE CONTEXT SETUP REQUEST message to the gNB-DU. If the gNB-DU succeeds to establish the UE context, it replies to the gNB-CU with UE CONTEXT SETUP RESPONSE. If no UE-associated logical F1-connection exists, the UE-associated logical F1-connection shall be established as part of the procedure. 
If the UE-CapabilityRAT-ContainerList IE is included in the UE CONTEXT SETUP REQUEST, the gNB-DU shall take this information into account for UE specific configurations.
If the servingCellMO IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall configure servingCellMO for the indicated SpCell accordingly.
If the SpCell UL Configured IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall configure UL for the indicated SpCell accordingly.
If the SCell To Be Setup List IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall consider it as a list of candidate SCells to be set up. If the SCell UL Configured IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall configure UL for the indicated SCell accordingly. If the servingCellMO IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall configure servingCellMO for the indicated SCell accordingly.
If the DRX Cycle IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall use the provided value from the gNB-CU.
If the UL Configuration IE in DRB to Be Setup Item IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall take it into account for UL scheduling.
If the SRB To Be Setup List IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall act as specified in TS 38.401 [4]. If Duplication Indication IE is contained in the SRB To Be Setup List IE, the gNB-DU shall, if supported, setup two RLC entities for the indicated SRB. If the Additional Duplication Indication IE is contained in the SRB To Be Setup List IE, the gNB-DU shall, if supported, setup the indicated RLC entities for the indicated SRB.
If the DRB To Be Setup List IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall act as specified in TS 38.401 [4]. If the QoS Flow Mapping Indication IE is included in the DRB To Be Setup List IE for a QoS flow, the gNB-DU may take it into account that only the uplink or downlink QoS flow is mapped to the indicated DRB.
For each GBR DRB, if the Alternative QoS Parameters Sets IE is included in the GBR QoS Flow Information IE in the UE CONTEXT SETUP REQUEST message, gNB-DU shall, if supported, behave the same as the NG-RAN node in the PDU Session Resource Setup procedure, specified in TS 38.413 [3].
If the BH Information IE is included in the UL UP TNL Information to be setup List IE or the Additional PDCP Duplication TNL List IE for a DRB, the gNB-DU shall, if supported, use the indicated BAP Routing ID and BH RLC channel for transmission of the corresponding GTP-U packets to the IAB-donor, as specified in TS 38.340 [30].
If the BH RLC Channel To Be Setup List IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall act as specified in TS 38.401 [4]. If the Traffic Mapping Information IE is included in the BH RLC Channel To Be Setup Item IEs IE for a BH RLC Channel, the gNB-DU shall, if supported, process the Traffic Mapping Information IE as follows: 
-	if the IP to layer2 Traffic Mapping Info IE is included, the gNB-DU shall store the mapping information contained in the IP to layer2 Mapping Info To Add IE, if present, for the egress BH RLC channel identified by the BH RLC CH ID IE, and shall remove the previously stored mapping information as indicated by the IP to layer2 Mapping Info To Remove IE, if present. The gNB-DU shall use the mapping information stored for the mapping of IP traffic to layer 2, as specified in TS 38.340 [30].
-	if the BAP layer BH RLC channel Mapping Info IE is included, the gNB-DU shall store the mapping information  contained in the BAP layer BH RLC channel Mapping Info To Add IE, if present, for the egress or ingress BH RLC channel identified by the BH RLC CH ID IE, and shall remove the previously stored mapping information as indicated by the BAP layer BH RLC channel Mapping Info To Remove IE, if present. The gNB-DU shall use the mapping information stored when forwarding traffic on BAP sublayer, as specified in TS 38.340 [30].
If two UL UP TNL Information IEs are included in UE CONTEXT SETUP REQUEST message for a DRB, gNB-DU shall include two DL UP TNL Information IEs in UE CONTEXT SETUP RESPONSE message and setup two RLC entities for the indicated DRB. gNB-CU and gNB-DU use the UL UP TNL Information IEs and DL UP TNL Information IEs to support packet duplication for intra-gNB-DU CA as defined in TS 38.470 [2]. The first UP TNL Information IE of the two UP TNL Information IEs is for the primary path.
If one or two Additional PDCP Duplication UP TNL Information IEs are included in the UE CONTEXT SETUP REQUEST message for a DRB, the gNB-DU shall, if supported, include one or two Additional PDCP Duplication UP TNL Information IEs in the UE CONTEXT SETUP RESPONSE message and setup one or two additional RLC entities for the indicated DRB. The gNB-CU and the gNB-DU use the Additional PDCP Duplication UP TNL Information IEs to support packet duplication for intra-gNB-DU CA as defined in TS 38.470 [2].
If Duplication Activation IE is included in the UE CONTEXT SETUP REQUEST message for a DRB, gNB-DU should take it into account when activating/deactivating CA based PDCP duplication for the DRB. If the RLC Duplication State List IE is included in the RLC Duplication Information IE contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, take it into account when activating/deactivating CA based PDCP duplication for the DRB with more than two RLC entities.
If DC Based Duplication Configured IE is included in the UE CONTEXT SETUP REQUEST message for a DRB, gNB-DU shall regard that DC based PDCP duplication is configured for this DRB if the value is set to be "true" and it should take the responsibility of PDCP duplication activation/deactivation. If DC Based Duplication Activation IE is included in the UE CONTEXT SETUP REQUEST message for a DRB, gNB-DU should take it into account when activating/deactivating DC based PDCP duplication for this DRB. If the RLC Duplication State List IE is included in the RLC Duplication Information IE contained in the UE CONTEXT SETUP REQUEST message for a DRB, the gNB-DU shall, if supported, take it into account when activating/deactivating DC based PDCP duplication for the DRB with more than two RLC entities. If the Primary Path Indication IE is included in the RLC Duplication Information IE, the gNB-DU shall, if supported, take it into account when performing DC based PDCP duplication for the DRB with more than two RLC entities.
If UL PDCP SN length IE is included in the UE CONTEXT SETUP REQUEST message for a DRB, gNB-DU shall, if supported, store this information and use it for lower layer configuration.
For EN-DC operation, and if the Subscriber Profile ID for RAT/Frequency priority IE is received from an MeNB, the UE CONTEXT SETUP REQUEST message shall contain the Subscriber Profile ID for RAT/Frequency priority IE. If the Additional RRM Policy Index IE is received from an MeNB, the UE CONTEXT SETUP REQUEST message shall, if supported, contain the Additional RRM Policy Index IE. The gNB-DU shall store the received Subscriber Profile ID for RAT/Frequency priority in the UE context and use it as defined in TS 36.300 [20]. The gNB-DU shall, if supported, store the received Additional RRM Policy Index in the UE context and use it as defined in TS 36.300 [20].
If the Index to RAT/Frequency Selection Priority IE is available at the gNB-CU, the Index to RAT/Frequency Selection Priority IE shall be included in the UE CONTEXT SETUP REQUEST. The gNB-DU may use it for RRM purposes.
The gNB-DU shall report to the gNB-CU, in the UE CONTEXT SETUP RESPONSE message, the result for all the requested DRBs, SRBs and BH RLC channels in the following way:
-	A list of DRBs which are successfully established shall be included in the DRB Setup List IE;
-	A list of DRBs which failed to be established shall be included in the DRB Failed to Setup List IE;
-	A list of SRBs which failed to be established shall be included in the SRB Failed to Setup List IE. 
-	A list of successfully established SRBs with logical channel identities for primary path shall be included in the SRB Setup List IE only if CA based PDCP duplication is initiated for the concerned SRBs.
-	A list of BH RLC channels which are successfully established shall be included in the BH RLC Channel Setup List IE;
-	A list of BH RLC channels which failed to be established shall be included in the BH RLC Channel Failed to be Setup List IE;
-	A list of SL DRBs which are successfully established shall be included in the SL DRB Setup List IE;
-	A list of SL DRBs which failed to be established shall be included in the SL DRB Failed to Setup List IE.
When the gNB-DU reports the unsuccessful establishment of a DRB or SRB or SL DRB or a BH RLC channel, the cause value should be precise enough to enable the gNB-CU to know the reason for the unsuccessful establishment.
For EN-DC operation, the gNB-CU shall include in the UE CONTEXT SETUP REQUEST the E-UTRAN QoS IE. The allocation of resources according to the values of the Allocation and Retention Priority IE included in the E-UTRAN QoS IE shall follow the principles described for the E-RAB Setup procedure in TS 36.413 [15].
For NG-RAN operation, the gNB-CU shall include in the UE CONTEXT SETUP REQUEST the DRB Information IE.
For DC operation, the CG-ConfigInfo IE shall be included in the CU to DU RRC Information IE at the gNB acting as secondary node. If the CG-ConfigInfo IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall regard it as a reconfiguration with sync as defined in TS 38.331 [8].
For sidelink operation, the CG-ConfigInfo IE shall be included in the CU to DU RRC Information IE if the gNB-CU receives sidelink related UE information from UE. If the CG-ConfigInfo IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall regard it as an indication of V2X sidelink information as defined in TS 38.331 [8].
If the HandoverPreparationInformation IE is included in the CU to DU RRC Information IE in the UE CONTEXT SETUP REQUEST message, the gNB-DU of the gNB acting as master node shall regard it as a reconfiguration with sync as defined in TS 38.331 [8]. The gNB-CU shall only initiate the UE Context Setup procedure for handover or secondary node addition when at least one DRB is setup for the UE, or at least one BH RLC channel is set up for IAB-MT. If the HandoverPreparationInformation IE containing the sidelink related UE information is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall regard it as an indication of V2X sidelink information as defined in TS 38.331 [8].
If the received CU to DU RRC Information IE does not include source cell group configuration, the gNB-DU shall generate the cell group configuration using full configuration. Otherwise, delta configuration is allowed.
If the gNB-CU includes the SMTC information of the measured frequency(ies) in the MeasurementTimingConfiguration IE of the CU to DU RRC Information IE that is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall generate the measurement gaps based on the received SMTC information. Then the gNB-DU shall send the measurement gaps information to the gNB-CU in the MeasGapConfig IE of the DU to CU RRC Information IE that is included in the UE CONTEXT SETUP RESPONSE message.
If the MeasConfig IE is included in the CU to DU RRC Information IE in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall deduce that changes to the measurements configuration need to be applied. If the measObjectToAddModList IE is included in the MeasConfig IE, then the frequencies added in such IE are to be activated. Then the gNB-DU shall decide if measurement gaps are needed or not and, if needed, the gNB-DU shall send the measurement gaps information to the gNB-CU in the MeasGapConfig IE of the DU to CU RRC Information IE that is included in the UE CONTEXT SETUP RESPONSE message. If the measObjectToRemoveList IE is included in the MeasConfig IE, the gNB-DU shall ignore it.
For EN-DC operation, if the gNB-CU includes the Resource Coordination Transfer Information IE in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, use it for the purpose of resource coordination. If the Ignore PRACH Configuration IE is present and set to "true" the E-UTRA PRACH Configuration IE in the UE CONTEXT SETUP REQUEST message shall be ignored. If the gNB-CU received the MeNB Resource Coordination Information as defined in TS 36.423 [9], it shall transparently transfer it to the gNB-DU via the Resource Coordination Transfer Container IE in the UE CONTEXT SETUP REQUEST message. The gNB-DU shall use the information received in the Resource Coordination Transfer Container IE for reception of MeNB Resource Coordination Information at the gNB acting as secondary node as described in TS 36.423 [9]. If the Resource Coordination E-UTRA Cell Information IE is included in the Resource Coordination Transfer Information IE, the gNB-DU shall store the information replacing previously received information for the same E-UTRA cell, and use the stored information for the purpose of resource coordination.
For NGEN-DC or NE-DC operation, if the gNB-CU includes the Resource Coordination Transfer Information IE in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, use it for the purpose of resource coordination. If the gNB-CU received the MR-DC Resource Coordination Information as defined in TS 38.423 [28], it shall transparently transfer it to the gNB-DU via the Resource Coordination Transfer Container IE in the UE CONTEXT SETUP REQUEST message. The gNB-DU shall use the information received in the Resource Coordination Transfer Container IE for reception of MR-DC Resource Coordination Information at the gNB as described in TS 38.423 [28].
The UEAssistanceInformation IE shall be included in CU to DU RRC Information IE in the UE CONTEXT SETUP REQUEST message if the gNB-CU received this IE from the UE; if the UEAssistanceInformation IE is included in the CU to DU RRC Information IE in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, take it into account when configuring resources for the UE.
The UEAssistanceInformationEUTRA IE shall be included in CU to DU RRC Information IE in the UE CONTEXT SETUP REQUEST message if the gNB-CU received this IE from the UE; if the UEAssistanceInformationEUTRA IE is included in the CU to DU RRC Information IE in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, take it into account when configuring LTE sidelink resources for the UE.
If the Resource Coordination Transfer Container IE is included in the UE CONTEXT SETUP RESPONSE, the gNB-CU shall transparently transfer this information for the purpose of resource coordination as described in TS 36.423 [9], TS 38.423 [28].
If the Masked IMEISV IE is contained in the UE CONTEXT SETUP REQUEST message the gNB-DU shall, if supported, use it to determine the characteristics of the UE for subsequent handling.
If the SCell Failed To Setup List IE is contained in the UE CONTEXT SETUP RESPONSE message, the gNB-CU shall regard the corresponding SCell(s) failed to be set up with an appropriate cause value for each SCell failed to setup.
If the Inactivity Monitoring Request IE is contained in the UE CONTEXT SETUP REQUEST message, gNB-DU may consider that the gNB-CU has requested the gNB-DU to perform UE inactivity monitoring. If the Inactivity Monitoring Response IE is contained in the UE CONTEXT SETUP RESPONSE message and set to "Not-supported", the gNB-CU shall consider that the gNB-DU does not support UE inactivity monitoring for the UE. 
If the CellGroupConfig IE is included in the DU to CU RRC Information IE contained in the UE CONTEXT SETUP RESPONSE message, the gNB-CU shall perform RRC Reconfiguration or RRC connection resume as described in TS 38.331 [8]. The CellGroupConfig IE shall transparently be signaled to the UE as specified in TS 38.331 [8].
If the Full Configuration IE is contained in the UE CONTEXT SETUP RESPONSE message, the gNB-CU shall consider that the gNB-DU has generated the CellGroupConfig IE using full configuration.
If the C-RNTI IE is included in the UE CONTEXT SETUP RESPONSE, the gNB-CU shall consider that the C-RNTI has been allocated by the gNB-DU for this UE context.
The UE Context Setup Procedure is not used to configure SRB0.
If the UE CONTEXT SETUP REQUEST message contains the RRC-Container IE, the gNB-DU shall send the corresponding RRC message to the UE via SRB1.
If the Notification Control IE is included in the DRB to Be Setup List IE contained in the UE CONTEXT SETUP REQUEST message and it is set to active, the gNB-DU shall, if supported, monitor the QoS of the DRB and notify the gNB-CU if the QoS cannot be fulfilled any longer or if the QoS can be fulfilled again. The Notification Control IE can only be applied to GBR bearers.
If the UL PDU Session Aggregate Maximum Bit Rate IE is included in the QoS Flow Level QoS Parameters IE contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall store the received UL PDU Session Aggregate Maximum Bit Rate and use it when enforcing uplink traffic policing for non-GBR Bearers for the concerned UE as specified in TS 23.501 [21].
The gNB-DU shall store the received gNB-DU UE Aggregate Maximum Bit Rate Uplink and use it for non-GBR Bearers for the concerned UE.
If the UE CONTEXT SETUP REQUEST message contains the QoS Flow Mapping Indication IE, the gNB-DU may take it into account that only the uplink or downlink QoS flow is mapped to the DRB.
If the UE CONTEXT SETUP REQUEST message contains the New gNB-CU UE F1AP ID IE, the gNB-DU shall, if supported, replace the value received in the gNB-CU UE F1AP ID IE by the value of the New gNB-CU UE F1AP ID and use it for further signalling.
If the RAN UE ID IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall store and replace any previous information received.
If the Trace Activation IE is included in the UE CONTEXT SETUP REQUEST message the gNB-DU shall, if supported, initiate the requested trace function as described in TS 32.422 [29].
In particular, the gNB-DU shall, if supported:
-	if the Trace Activation IE includes the MDT Activation IE set to "Immediate MDT and Trace", initiate the requested trace session and MDT session as described in TS 32.422 [29];
-	if the Trace Activation IE includes the MDT Activation IE set to "Immediate MDT Only", initiate the requested MDT session as described in TS 32.422 [29] and the gNB-DU shall ignore Interfaces To Trace IE, and Trace Depth IE. If the Management Based MDT PLMN List IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, store the received information in the UE context, and use this information to allow subsequent selection of the UE for management based MDT defined in TS 32.422 [29].
For each QoS flow whose DRB has been successfully established and the QoS Monitoring Request IE was included in the QoS Flow Level QoS Parameters IE contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall store this information, and, if supported, perform delay measurement and QoS monitoring, as specified in TS 23.501 [21].
If the UE CONTEXT SETUP REQUEST message contains the Configured BAP Address IE, the gNB-DU shall, if supported, store this BAP address configured for the corresponding child IAB-node and use it as specified in TS 38.340 [30].
If the BAP Control PDU Channel IE is included in the BH RLC Channel to be Setup List IE, the gNB-DU shall, if supported, consider that the configured BH RLC channel can be used to transmit BAP Control PDUs, and use this BH RLC channel as specified in TS 38.340 [30].
If the F1-C Transfer Path IE is included in UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, take it into account.
If the NR V2X Services Authorized IE is contained in the UE CONTEXT SETUP REQUEST message and it contains one or more IEs set to "authorized", the gNB-DU node shall, if supported, consider that the UE is authorized for the relevant service(s).
If the LTE V2X Services Authorized IE is contained in the UE CONTEXT SETUP REQUEST message and it contains one or more IEs set to "authorized", the gNB-DU node shall, if supported, consider that the UE is authorized for the relevant service(s).
If the NR UE Sidelink Aggregate Maximum Bit Rate IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, use it for the concerned UE's sidelink communication in network scheduled mode for NR V2X services.
If the LTE UE Sidelink Aggregate Maximum Bit Rate IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, use it for the concerned UE's sidelink communication in network scheduled mode for LTE V2X services.
If the PC5 Link Aggregate Bit Rate IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, use it for the concerned UE's sidelink communication in network scheduled mode for NR V2X services as defined in TS 23.287 [40].
If the TSC Traffic Characteristics IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, take into account the corresponding information received in the TSC Traffic Characteristics IE.
If the Conditional Inter-DU Mobility Information IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall consider that the request concerns a conditional handover or conditional PSCell change for the included SpCell ID IE and shall include it as the Requested Target Cell ID IE in the UE CONTEXT SETUP RESPONSE message. The gNB-DU shall regard it as a reconfiguration with sync as defined in TS 38.331 [8].
If the Target gNB-DU UE F1AP ID IE is contained in the Conditional Inter-DU Mobility Information IE included in the UE CONTEXT SETUP REQUEST message, then the gNB-DU shall replace the existing prepared conditional handover or conditional PSCell change identified by the Target gNB-DU UE F1AP ID IE and the SpCell ID IE.
If the Serving NID IE is contained in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall combine the Serving NID IE with the Serving PLMN IE to identify the serving NPN, and may take it into account for UE context establishment.
If the Estimated Arrival Probability IE is contained in the Conditional Inter-DU Mobility Information IE included in the UE CONTEXT SETUP REQUEST message, then the gNB-DU may use the information to allocate necessary resources for the UE.
If for a given E-RAB for EN-DC operation the ENB DL Transport Layer Address IE is included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall, if supported, use it as part of its ACL functionality configuration actions, if such ACL functionality is deployed.
If for a given Qos flow for NG-RAN operation the PDCP Terminating Node DL Transport Layer Address IE is included in the UE CONTEXT SETUP REQUEST message, then the gNB-DU shall, if supported, use it as part of its ACL functionality configuration actions, if such ACL functionality is deployed.
8.3.1.3	Unsuccessful Operation

Figure 8.3.1.3-1: UE Context Setup Request procedure: unsuccessful Operation
If the gNB-DU is not able to establish an F1 UE context, or cannot even establish one bearer it shall consider the procedure as failed and reply with the UE CONTEXT SETUP FAILURE message. If the Conditional Inter-DU Mobility Information IE was included in the UE CONTEXT SETUP REQUEST message, the gNB-DU shall include the received SpCell ID IE as the Requested Target Cell ID IE in the UE CONTEXT SETUP FAILURE message.
If the gNB-DU is not able to accept the SpCell ID IE in UE CONTEXT SETUP REQUEST message, it shall reply with the UE CONTEXT SETUP FAILURE message with an appropriate cause value. Further, if the Candidate SpCell List IE is included in the UE CONTEXT SETUP REQUEST message and the gNB-DU is not able to accept the SpCell ID IE, the gNB-DU shall, if supported, include the Potential SpCell List IE in the UE CONTEXT SETUP FAILURE message and the gNB-CU should take this into account for selection of an opportune SpCell. The gNB-DU shall include the cells in the Potential SpCell List IE in a priority order, where the first cell in the list is the one most desired and the last one is the one least desired (e.g., based on load conditions). If the Potential SpCell List IE is present but no Potential SpCell Item IE is present, the gNB-CU should assume that none of the cells in the Candidate SpCell List IE are acceptable for the gNB-DU.
8.3.1.4	Abnormal Conditions
If the gNB-DU receives a UE CONTEXT SETUP REQUEST message containing a E-UTRAN QoS IE for a GBR QoS DRB but where the GBR QoS Information IE is not present, the gNB-DU shall report the establishment of the corresponding DRB as failed in the DRB Failed to Setup List IE of the UE CONTEXT SETUP RESPONSE message with an appropriate cause value. If the gNB-DU receives a UE CONTEXT SETUP REQUEST message containing a DRB QoS IE for a GBR QoS DRB but where the GBR QoS Flow Information IE is not present, the gNB-DU shall report the establishment of the corresponding DRBs as failed in the DRB Failed to Setup List IE of the UE CONTEXT SETUP RESPONSE message with an appropriate cause value.
If the Delay Critical IE is included in the Dynamic 5QI Descriptor IE within the DRB QoS IE in the UE CONTEXT SETUP REQUEST message and is set to the value "delay critical" but the Maximum Data Burst Volume IE is not present, the gNB-DU shall report the establishment of the corresponding DRB as failed in the DRB Failed to Setup List IE of the of the UE CONTEXT SETUP RESPONSE message with an appropriate cause value. 
In case of "CHO-replace" when the Target gNB-DU UE F1AP ID IE is included, if the candidate cell in the SpCell ID IE included in the UE CONTEXT SETUP REQUEST message was not prepared using the same UE-associated signaling connection, the gNB-DU shall ignore this candidate cell.
8.3.2	UE Context Release Request (gNB-DU initiated)
8.3.2.1	General
The purpose of the UE Context Release Request procedure is to enable the gNB-DU to request the gNB-CU to release the UE-associated logical F1-connection or candidate cells in conditional handover or conditional PSCell change. The procedure uses UE-associated signalling.
8.3.2.2	Successful Operation

Figure 8.3.2.2-1: UE Context Release (gNB-DU initiated) procedure. Successful operation
The gNB-DU controlling a UE-associated logical F1-connection initiates the procedure by generating a UE CONTEXT RELEASE REQUEST message towards the affected gNB-CU node. 
The UE CONTEXT RELEASE REQUEST message shall indicate the appropriate cause value. 
If the Candidate Cells To Be Cancelled List IE is included in the UE CONTEXT RELEASE REQUEST message, the gNB-CU shall consider that the only the resources reserved for the candidate cells identified by the included NR CGIs and associated to the UE-associated signaling identified by the gNB-CU UE F1AP ID IE and the gNB-DU UE F1AP ID IE are about to be released by the gNB-DU.
Interactions with UE Context Release procedure:
The UE Context Release procedure may be initiated upon reception of a UE CONTEXT RELEASE REQUEST message. 
Interactions with UE Context Setup procedure:
The UE Context Release Request procedure may be performed before the UE Context Setup procedure to request the release of an existing UE-associated logical F1-connection and related resources in the gNB-DU.
8.3.2.3	Abnormal Conditions
If one or more candidate cells in the Candidate Cells To Be Cancelled List IE included in the UE CONTEXT RELEASE REQUEST message were not prepared using the same UE-associated signaling connection, the gNB-CU shall ignore those non-associated candidate cells.
8.3.3	UE Context Release (gNB-CU initiated)
8.3.3.1	General
The purpose of the UE Context Release procedure is to enable the gNB-CU to order the release of the UE-associated logical connection or candidate cells in conditional handover or conditional PSCell change. The procedure uses UE-associated signalling.
8.3.3.2	Successful Operation

Figure 8.3.3.2-1: UE Context Release (gNB-CU initiated) procedure. Successful operation
The gNB-CU initiates the procedure by sending the UE CONTEXT RELEASE COMMAND message to the gNB-DU. 
Upon reception of the UE CONTEXT RELEASE COMMAND message, the gNB-DU shall release all related signalling and user data transport resources and reply with the UE CONTEXT RELEASE COMPLETE message.
If the old gNB-DU UE F1AP ID IE is included in the UE CONTEXT RELEASE COMMAND message, the gNB-DU shall additionally release the UE context associated with the old gNB-DU UE F1AP ID.
If the UE CONTEXT RELEASE COMMAND message contains the RRC-Container IE, the gNB-DU shall send the RRC container to the UE via the SRB indicated by the SRB ID IE.
If the UE CONTEXT RELEASE COMMAND message includes the Execute Duplication IE, the gNB-DU shall perform CA based duplication, if configured, for the SRB for the included RRC-Container IE. 
If the Candidate Cells To Be Cancelled List IE is included in the UE CONTEXT RELEASE COMMAND message, the gNB-DU shall consider that the gNB-CU is cancelling only the conditional handover or conditional PSCell change associated to the cells identified by the included NR CGIs and associated to the UE-associated signaling identified by the gNB-CU UE F1AP ID IE and the gNB-DU UE F1AP ID IE.
Interactions with UE Context Setup procedure:
The UE Context Release procedure may be performed before the UE Context Setup procedure to release an existing UE-associated logical F1-connection and related resources in the gNB-DU, e.g. when gNB-CU rejects UE access it shall trigger UE Context Release procedure with the cause value of UE rejection.
8.3.3.4	Abnormal Conditions
If one or more candidate cells in the Candidate Cells To Be Cancelled List IE included in the UE CONTEXT RELEASE COMMAND message were not prepared using the same UE-associated signalling connection, the gNB-DU shall ignore those non-associated candidate cells.
8.3.4	UE Context Modification (gNB-CU initiated)
8.3.4.1	General
The purpose of the UE Context Modification procedure is to modify the established UE Context, e.g., establishing, modifying and releasing radio resources or sidelink resources. This procedure is also used to command the gNB-DU to stop data transmission for the UE for mobility (see TS 38.401 [4]). The procedure uses UE-associated signalling.
8.3.4.2	Successful Operation

Figure 8.3.4.2-1: UE Context Modification procedure. Successful operation
The UE CONTEXT MODIFICATION REQUEST message is initiated by the gNB-CU.
Upon reception of the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall perform the modifications, and if successful reports the update in the UE CONTEXT MODIFICATION RESPONSE message.
If the SpCell ID IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall replace any previously received value and regard it as a reconfiguration with sync as defined in TS 38.331 [8]. If the ServCellIndex IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall take this into account for the indicated SpCell. If the SpCell UL Configured IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall configure UL for the indicated SpCell accordingly. If the servingCellMO IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall configure servingCellMO for the indicated SpCell accordingly.
If the SCell To Be Setup List IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall consider it as a list of candidate SCells to be set up. If the SCell To Be Setup List IE is included in the UE CONTEXT MODIFICATION REQUEST message and the indicated SCell(s) are already setup, the gNB-DU shall replace any previously received value. If the SCell UL Configured IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall configure UL for the indicated SCell accordingly. If the servingCellMO IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall configure servingCellMO for the indicated SCell accordingly.
If the SCell To Be Removed List IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall consider it as a list of SCells to be removed.
If the DRX Cycle IE is contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall use the provided value from the gNB-CU. If the DRX configuration indicator IE is contained in the UE CONTEXT MODIFICATION REQUEST message and set to "release", the gNB-DU shall release DRX configuration.
If the SRB To Be Setup List IE is contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall act as specified in the TS 38.401 [4], and replace any previously received value. If Duplication Indication IE is contained in the SRB To Be Setup List IE, the gNB-DU shall, if supported, setup two RLC entities for the indicated SRB if the value is set to be "true", or delete the RLC entity of secondary path if the value is set to be "false". If the Additional Duplication Indication IE is contained in the SRB To Be Setup List IE, the gNB-DU shall, if supported, setup the indicated RLC entities for the indicated SRB.
If the DRB To Be Setup List IE is contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall act as specified in the TS 38.401 [4].
If the BH Information IE is included in the UL UP TNL Information to be setup List IE or the Additional PDCP Duplication TNL List IE for a DRB, the gNB-DU shall, if supported, use the indicated BAP Routing ID and BH RLC channel for transmission of the corresponding GTP-U packets to the IAB-donor, as specified in TS 38.340 [30].
If the BH RLC Channel To Be Setup List IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall act as specified in TS 38.401 [4]. If the Traffic Mapping Information IE is included in the BH RLC Channel To Be Setup Item IEs IE for a BH RLC Channel, the gNB-DU shall, if supported, process the Traffic Mapping Information IE following the behaviour described for the UE Context Setup procedure.
If the BH RLC Channel To Be Modified List IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall act as specified in TS 38.401 [4]. If the Traffic Mapping Information IE is included in the BH RLC Channel To Be Modified Item IEs IE for a BH RLC Channel, the gNB-DU shall, if supported, process the Traffic Mapping Information IE following the behaviour described for the UE Context Setup procedure.
If the BH RLC Channel To Be Released List IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall release the BH RLC channels in the list.
If two UL UP TNL Information IEs are included in UE CONTEXT MODIFICATION REQUEST message for a DRB, the gNB-DU shall include two DL UP TNL Information IEs in UE CONTEXT MODIFICATION RESPONSE message and setup two RLC entities for the indicated DRB. gNB-CU and gNB-DU use the UL UP TNL Information IEs and DL UP TNL Information IEs to support packet duplication for intra-gNB-DU CA as defined in TS 38.470 [2]. The first UP TNL Information IE of the two UP TNL Information IEs is for the primary path. 
If one or two Additional PDCP Duplication UP TNL Information IEs are included in the UE CONTEXT MODIFICATION REQUEST message for a DRB, the gNB-DU shall, if supported, include one or two Additional PDCP Duplication UP TNL Information IEs in the UE CONTEXT MODIFICATION RESPONSE message and setup one or two additional RLC entities for the indicated DRB. The gNB-CU and the gNB-DU use the Additional PDCP Duplication UP TNL Information IEs to support packet duplication for intra-gNB-DU CA as defined in TS 38.470 [2].
If Duplication Activation IE is included in the UE CONTEXT MODIFICATION REQUEST message for a DRB, the gNB-DU should take it into account when activating/deactivating CA based PDCP duplication for the DRB. If the RLC Duplication State List IE is included in the RLC Duplication Information IE contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, take it into account for the DRB with more than two RLC entities.
If DC Based Duplication Configured IE is included in the UE CONTEXT MODIFICATION REQUEST message for a DRB, the gNB-DU shall regard that DC based PDCP duplication is configured for this DRB if the value is set to be "true" and it should take the responsibility of PDCP duplication activation/deactivation. Otherwise, the gNB-DU shall regard that DC based PDCP duplication is de-configured for this DRB id the value is set to be "false", and it should stop PDCP duplication activation/deactivation by MAC CE. If DC Based Duplication Activation IE is included in the UE CONTEXT MODIFICATION REQUEST message for a DRB, the gNB-DU should take it into account when activating/deactivating DC based PDCP duplication for this DRB. If the RLC Duplication State List IE is included in the RLC Duplication Information IE contained in the UE CONTEXT MODIFICATION REQUEST message for a DRB, the gNB-DU shall, if supported, take it into account when activating/deactivating DC based PDCP duplication for the DRB with more than two RLC entities. If the Primary Path Indication IE is included in the RLC Duplication Information IE, the gNB-DU shall, if supported, take it into account when performing DC based PDCP duplication for the DRB with more than two RLC entities.
For a certain DRB which was allocated with two GTP-U tunnels, if such DRB is modified and given one GTP-U tunnel via the UE Context Modification procedure, the gNB-DU shall consider that the CA based PDCP duplication for the concerned DRB is de-configured. If such UE Context Modification procedure occurs, the Duplication Activation IE shall not be included for the concerned DRB.
If the UL Configuration IE in DRB to Be Setup Item IE or DRB to Be Modified Item IE is contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall take it into account for UL scheduling.
If the RRC Reconfiguration Complete Indicator IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall consider the ongoing reconfiguration procedure involving changes of the L1/L2 configuration at the gNB-DU signalled to the gNB-CU via the CellGroupConfig IE for MR-DC operation or standalone operation has been successfully performed when such IE is set to ‘true’; otherwise (when such IE is set to ‘failure’), the gNB-DU shall consider the ongoing reconfiguration procedure has been failed and it shall continue to use the old L1/L2 configuration.
If DL PDCP SN length IE is included in the UE CONTEXT MODIFICATION REQUEST message for a DRB, gNB-DU shall, if supported, store this information and use it for lower layer configuration.
If UL PDCP SN length IE is included in the UE CONTEXT MODIFICATION REQUEST message for a DRB, gNB-DU shall, if supported, store this information and use it for lower layer configuration.
If the RLC Failure Indication IE is included in UE CONTEXT MODIFICATION REQUEST message, the gNB-DU should consider that the RLC entity indicated by such IE needs to be re-established when the CA-based packet duplication is active, and the gNB-DU may include the Associated SCell List IE in UE CONTEXT MODIFICATION RESPONSE by containing a list of SCell(s) associated with the RLC entity indicated by the RLC Failure Indication IE.
If the UE CONTEXT MODIFICATION REQUEST message contains the RRC-Container IE, the gNB-DU shall send the corresponding RRC message to the UE. If the UE CONTEXT MODIFICATION REQUEST message includes the Execute Duplication IE, the gNB-DU shall perform CA based duplication, if configured, for the SRB for the included RRC-Container IE.
If the UE CONTEXT MODIFICATION REQUEST message contains the Transmission Action Indicator IE, the gNB-DU shall stop or restart (if already stopped) data transmission for the UE, according to the value of this IE. It is up to gNB-DU implementation when to stop or restart the UE scheduling.
For EN-DC operation, if the DRB to Be Setup List IE is present in the UE CONTEXT MODIFICATION REQUEST message the gNB-CU shall include the E-UTRAN QoS IE. The allocation of resources according to the values of the Allocation and Retention Priority IE included in the E-UTRAN QoS IE shall follow the principles described for the E-RAB Setup procedure in TS 36.413 [15]. For NG-RAN operation, the gNB-CU shall include the DRB Information IE in the UE CONTEXT MODIFICATION REQUEST message.
If the gNB-CU includes the SMTC information of the measured frequency(ies) in the MeasurementTimingConfiguration IE of the CU to DU RRC Information IE that is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall generate the measurement gaps based on the received SMTC information. Then the gNB-DU shall send the measurement gaps information to the gNB-CU in the MeasGapConfig IE of the DU to CU RRC Information IE that is included in the UE CONTEXT MODIFICATION RESPONSE message.
If the MeasConfig IE is included in the CU to DU RRC Information IE in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall deduce that changes to the measurements’ configuration need to be applied. The gNB-DU shall take the received info, e.g. the measObjectToAddModList IE, and/or the measObjectToRemoveList IE into account, when generating measurement gap and when deciding if a measurement gap is needed or not. 
For DC operation, if the gNB-CU includes the CG-Config IE in the CU to DU RRC Information IE that is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU may initiate low layer parameters coordination taking this information into account.
For sidelink operation, the CG-ConfigInfo IE shall be included in the CU to DU RRC Information IE if the gNB-CU receives sidelink related UE information from UE. If the CG-ConfigInfo IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall regard it as an indication of V2X sidelink information as defined in TS 38.331 [8].
For EN-DC operation, if the gNB-CU includes the Resource Coordination Transfer Information IE in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, use it for the purpose of resource coordination. If the gNB-CU received the MeNB Resource Coordination Information as defined in TS 36.423 [9], after completion of UE Context Setup procedures, the gNB-CU shall transparently transfer it to the gNB-DU via the Resource Coordination Transfer Container IE in the UE CONTEXT MODIFICATION REQUEST message. The gNB-DU shall use the information received in the Resource Coordination Transfer Container IE for reception of MeNB Resource Coordination Information at the gNB acting as secondary node as described in TS 36.423 [9]. If the Resource Coordination E-UTRA Cell Information IE is included in the Resource Coordination Transfer Information IE, the gNB-DU shall store the information replacing previously received information for the same E-UTRA cell, and use the stored information for the purpose of resource coordination. If the Ignore PRACH Configuration IE is present and set to "true" the E-UTRA PRACH Configuration IE in the UE CONTEXT MODIFICATION REQUEST message shall be ignored.
For NGEN-DC or NE-DC operation, if the gNB-CU includes the Resource Coordination Transfer Information IE in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, use it for the purpose of resource coordination. If the gNB-CU received the MR-DC Resource Coordination Information as defined in TS 38.423 [28], after completion of UE Context Setup procedures, the gNB-CU shall transparently transfer it to the gNB-DU via the Resource Coordination Transfer Container IE in the UE CONTEXT MODIFICATION REQUEST message. The gNB-DU shall use the information received in the Resource Coordination Transfer Container IE for reception of MR-DC Resource Coordination Information at the gNB as described in TS 38.423 [28].
For EN-DC operation, and if the Subscriber Profile ID for RAT/Frequency priority IE is received from an MeNB, the UE CONTEXT MODIFICTION REQUEST message shall contain the Subscriber Profile ID for RAT/Frequency priority IE. If the Additional RRM Policy Index IE is received from an MeNB, the UE CONTEXT MODIFICATION REQUEST message shall , if supported, contain the Additional RRM Policy Index IE. The gNB-DU shall store the received Subscriber Profile ID for RAT/Frequency priority in the UE context and use it as defined in TS 36.300 [20]. The gNB-DU shall, if supported, store the received Additional RRM Policy Index in the UE context and use it as defined in TS 36.300 [20].
If the Index to RAT/Frequency Selection Priority IE is modified at the gNB-CU, the Index to RAT/Frequency Selection Priority IE shall be included in the UE CONTEXT MODIFICATION REQUEST. The gNB-DU may use it for RRM purposes.
If the UE CONTEXT MODIFICATION REQUEST message contains the Uplink TxDirectCurrentList Information IE, the gNB-DU may take that into account when selecting L1 configuration.
The UEAssistanceInformation IE shall be included in CU to DU RRC Information IE in the UE CONTEXT MODIFICATION REQUEST message if the gNB-CU received this IE from the UE; if the UEAssistanceInformation IE is included in the CU to DU RRC Information IE in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, take it into account when configuring resources for the UE.
The UEAssistanceInformationEUTRA IE shall be included in CU to DU RRC Information IE in the UE CONTEXT MODIFICATION REQUEST message if the gNB-CU received this IE from the UE; if the UEAssistanceInformationEUTRA IE is included in the CU to DU RRC Information IE in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, take it into account when configuring LTE sidelink resources for the UE.
The gNB-DU shall report to the gNB-CU, in the UE CONTEXT MODIFICATION RESPONSE message, the result for all the requested or modified DRBs, SRBs and BH RLC Channels in the following way:
-	A list of DRBs which are successfully established shall be included in the DRB Setup List IE;
-	A list of DRBs which failed to be established shall be included in the DRB Failed to be Setup List IE;
-	A list of DRBs which are successfully modified shall be included in the DRB Modified List IE;
-	A list of DRBs which failed to be modified shall be included in the DRB Failed to be Modified List IE;
-	A list of SRBs which failed to be established shall be included in the SRB Failed to be Setup List IE. 
-	A list of successfully established SRBs with logical channel identities for primary path shall be included in the SRB Setup List IE only if CA based PDCP duplication is initiated for the concerned SRBs.
-	A list of successfully modified SRBs with logical channel identities for primary path shall be included in the SRB Modified List IE only if CA based PDCP duplication is initiated for the concerned SRBs.
-	A list of BH RLC channels which are successfully established shall be included in the BH RLC Channel Setup List IE;
-	A list of BH RLC channels which failed to be established shall be included in the BH RLC Channel Failed to be Setup List IE;
-	A list of BH RLC channels which are successfully modified shall be included in the BH RLC Channel Modified List IE;
-	A list of BH RLC channels which failed to be modified shall be included in the BH RLC Channel Failed to be Modified List IE;
-	A list of SL DRBs which are successfully established shall be included in the SL DRB Setup List IE;
-	A list of SL DRBs which failed to be established shall be included in the SL DRB Failed to be Setup List IE;
-	A list of SL DRBs which are successfully modified shall be included in the SL DRB Modified List IE;
-	A list of SL DRBs which failed to be modified shall be included in the SL DRB Failed to be Modified List IE.
For each GBR DRB, if the Alternative QoS Parameters Sets IE is included in the GBR QoS Flow Information IE in the UE CONTEXT MODIFICATION REQUEST message, gNB-DU shall, if supported, behave the same as the NG-RAN node in the PDU Session Resource Setup procedure, specified in TS 38.413 [3].
If the BAP Control PDU Channel IE is included in the BH RLC Channel to be Setup List IE, the gNB-DU shall, if supported, consider that the configured BH RLC channel can be used to transmit BAP Control PDUs, and use this BH RLC channel as specified in TS 38.340 [30].
If the BAP Control PDU Channel IE is included in the BH RLC Channel to be Modified List IE, the gNB-DU shall, if supported, consider that the configured BH RLC channel can be used to transmit BAP Control PDUs, and use this BH RLC channel as specified in TS 38.340 [30]. Otherwise, if the BAP Control PDU Channel IE is not present for any BH RLC channel, any available BH RLC channel can be used to transmit BAP Control PDUs as specified in TS 38.340 [30].
If the F1-C Transfer Path IE is included in UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, take it into account.
When the gNB-DU reports the unsuccessful establishment of a DRB or SRB or SL DRB or a BH RLC channel, the cause value should be precise enough to enable the gNB-CU to know the reason for the unsuccessful establishment.
If the Resource Coordination Transfer Container IE is included in the UE CONTEXT MODIFICATION RESPONSE, the gNB-CU shall transparently transfer this information for the purpose of resource coordination as described in TS 36.423 [9], TS 38.423 [28].
If the CellGroupConfig IE is included in the DU to CU RRC Information IE contained in the UE CONTEXT MODIFICATION RESPONSE message, the gNB-CU shall perform RRC Reconfiguration as described in TS 38.331 [8]. The CellGroupConfig IE shall transparently be signaled to the UE as specified in TS 38.331 [8].
If the UE-CapabilityRAT-ContainerList IE is included in the UE CONTEXT SETUP MODIFICATION REQUEST, the gNB-DU shall take this information into account for UE specific configurations.
If the SCell Failed To Setup List IE is contained in the UE CONTEXT MODIFICATION RESPONSE message, the gNB-CU shall regard the corresponding SCell(s) failed to be set up with an appropriate cause value for each SCell failed to setup.
If the C-RNTI IE is included in the UE CONTEXT MODIFICATION RESPONSE, the gNB-CU shall consider that the C-RNTI has been allocated by the gNB-DU for this UE context.
If the Inactivity Monitoring Request IE is contained in the UE CONTEXT MODIFICATION REQUEST message, gNB-DU may consider that the gNB-CU has requested the gNB-DU to perform UE inactivity monitoring. If the Inactivity Monitoring Response IE is contained in the UE CONTEXT MODIFICATION RESPONSE message and set to "Not-supported", the gNB-CU shall consider that the gNB-DU does not support UE inactivity monitoring for the UE.
The UE Context Modify Procedure is not used to configure SRB0.
If in the UE CONTEXT MODIFICATION REQUEST, the Notification Control IE is included in the DRB to Be Setup List IE or the DRB to Be Modified List IE and it is set to active, the gNB-DU shall, if supported, monitor the QoS of the DRB and notify the gNB-CU if the QoS cannot be fulfilled any longer or if the QoS can be fulfilled again. The Notification Control IE can only be applied to GBR bearers.
If the UL PDU Session Aggregate Maximum Bit Rate IE is included in the QoS Flow Level QoS Parameters IE containded in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall replace the received UL PDU Session Aggregate Maximum Bit Rate and use it as specified in TS 23.501 [21].
If the gNB-DU UE Aggregate Maximum Bit Rate Uplink IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall:
-	replace the previously provided gNB-DU UE Aggregate Maximum Bit Rate Uplink with the new received gNB-DU UE Aggregate Maximum Bit Rate Uplink;
-	use the received gNB-DU UE Aggregate Maximum Bit Rate Uplink for non-GBR Bearers for the concerned UE.
The gNB-DU UE Aggregate Maximum Bit Rate Uplink IE shall be sent in the UE CONTEXT MODIFICATION REQUEST if DRB to Be Setup List IE is included and the gNB-CU has not previously sent it. The gNB-DU shall store and use the received gNB-DU UE Aggregate Maximum Bit Rate Uplink IE.
If the RLC Status IE is included in the UE CONTEXT MODIFICATION RESPONSE message, the gNB-CU shall assume that RLC has been reestablished at the gNB-DU and may trigger PDCP data recovery.
If the GNB-DU Configuration Query IE is contained in the UE CONTEXT MODIFICATION REQUEST message, gNB-DU shall include the CellGroupConfig IE in the DU To CU RRC Information IE in the UE CONTEXT MODIFICATION RESPONSE message.
If the Bearer Type Change IE is included in DRB to Be Modified List IE in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall either reset the lower layers or generate a new LCID for the affected bearer as specified in TS 37.340 [7].
For NE-DC operation, if NeedforGap IE is included in the UE CONTEXT MODIFICATION REQUEST message,the gNB-DU shall generate measurement gap for the SeNB.
If the QoS Flow Mapping Indication IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, replace any previously received value and take it into account that only the uplink or downlink QoS flow is mapped to the DRB.
If the Lower Layer presence status change IE set to "suspend lower layers" is included in the UE CONTEXT MODIFICATION REQUEST, the gNB-DU shall keep all lower layer configuration for UEs, and not transmit or receive data from UE.
If the Lower Layer presence status change IE set to "resume lower layers" is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall use the previously stored lower layer configuration for the UE.
If the Full Configuration IE is contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall generate a CellGroupConfig IE using full configuration and include it in the UE CONTEXT MODIFICATION RESPONSE.
If the Full Configuration IE is contained in the UE CONTEXT MODIFICATION RESPONSE message, the gNB-CU shall consider that the gNB-DU has generated the CellGroupConfig IE using full configuration.
For each QoS flow whose DRB has been successfully established or modified and the QoS Monitoring Request IE was included in the QoS Flow Level QoS Parameters IE contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall store this information, and, if supported, perform delay measurement and QoS monitoring, as specified in TS 23.501 [21].
If the NR V2X Services Authorized IE is contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, update its V2X services authorization information for the UE accordingly. If the NR V2X Services Authorized IE includes one or more IEs set to "not authorized", the gNB-DU shall, if supported, initiate actions to ensure that the UE is no longer accessing the relevant service(s).
If the LTE V2X Services Authorized IE is contained in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, update its V2X services authorization information for the UE accordingly. If the LTE V2X Services Authorized IE includes one or more IEs set to "not authorized", the gNB-DU shall, if supported, initiate actions to ensure that the UE is no longer accessing the relevant service(s).
If the LTE UE Sidelink Aggregate Maximum Bit Rate IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported:
-	replace the previously provided UE LTE Sidelink Aggregate Maximum Bit Rate, if available in the UE context, with the received value; 
-	use the received value for the concerned UE’s sidelink communication in network scheduled mode for LTE V2X services.
If the NR UE Sidelink Aggregate Maximum Bit Rate IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported:
-	replace the previously provided UE NR Sidelink Aggregate Maximum Bit Rate, if available in the UE context, with the received value; 
-	use the received value for the concerned UE’s sidelink communication in network scheduled mode for NR V2X services.
If the PC5 Link Aggregate Maximum Bit Rate IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported:
-	replace the previously provided UE PC5 Link Aggregate Bit Rate, if available in the UE context, with the received value;
-	use the received value for the concerned UE’s sidelink communication in network scheduled mode for NR V2X services as defined in TS 23.287 [40].
If the TSC Traffic Characteristics IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, take into account the corresponding information received in the TSC Traffic Characteristics IE.
If the Conditional Intra-DU Mobility Information IE is included in the UE CONTEXT MODIFICATION REQUEST message and the CHO Trigger is set to "CHO-initiation", the gNB-DU shall consider that the request concerns a conditional handover or conditional PSCell change for the included SpCell ID IE and shall include it as the Requested Target Cell ID IE in the UE CONTEXT MODIFICATION RESPONSE message. The gNB-DU shall regard it as a reconfiguration with sync as defined in TS 38.331 [8].
If the Conditional Intra-DU Mobility Information IE is included in the UE CONTEXT MODIFICATION REQUEST message and the CHO Trigger is set to "CHO-replace", the gNB-DU shall replace the existing prepared conditional mobility identified by the gNB-DU UE F1AP ID IE and the SpCell ID IE.
If the Conditional Intra-DU Mobility Information IE is included in the UE CONTEXT MODIFICATION REQUEST message and the CHO Trigger is set to "CHO-cancel", the gNB-DU shall consider that the gNB-CU is about to remove any reference to, and release any resources previously reserved for the candidate cells associated to the UE-associated signalling identified by the gNB-CU UE F1AP ID IE and the gNB-DU UE F1AP ID IE. If the Candidate Cells To Be Cancelled List IE is also included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall consider that only the resources reserved for the cells identified by the included NR CGIs are about to be released by the gNB-CU.
If the Transmission Stop Indicator IE is included within the DRB to Be Modified Item IE in the UE CONTEXT MODIFICATION REQUEST message and set to “true”, the gNB-DU shall, if supported, stop the data transmission for the DRB. It is up to gNB-DU implementation when to stop the UE scheduling for that DRB.
If the SCG Indicator IE is contained in the UE CONTEXT MODIFICATION REQUEST message and it is set to “released”, the gNB-DU shall, if supported, deduce that an SCG is removed.
If the Estimated Arrival Probability IE is contained in the Conditional Inter-DU Mobility Information IE included in the UE CONTEXT MODIFICATION REQUEST message, then the gNB-DU may use the information to allocate necessary resources for the UE.
If the Location Measurement Information IE is included in the CU to DU RRC Information IE in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, take it into account when configuring measurement gaps for the UE.
If for a given E-RAB for EN-DC operation the ENB DL Transport Layer Address IE is included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall, if supported, use it as part of its ACL functionality configuration actions, if such ACL functionality is deployed.
If for a given Qos flow for NG-RAN operation the PDCP Terminating Node DL Transport Layer Address IE is included in the UE CONTEXT MODIFICATION REQUEST message, then the gNB-DU shall, if supported, use it as part of its ACL functionality configuration actions, if such ACL functionality is deployed.
8.3.4.3	Unsuccessful Operation

Figure 8.3.4.3-1: UE Context Modification procedure. Unsuccessful operation
In case none of the requested modifications of the UE context can be successfully performed, the gNB-DU shall respond with the UE CONTEXT MODIFICATION FAILURE message with an appropriate cause value. If the Conditional Intra-DU Mobility Information IE was included in the UE CONTEXT MODIFICATION REQUEST message and set to "CHO-initiation", the gNB-DU shall include the received SpCell ID IE as the Requested Target Cell ID IE in the UE CONTEXT MODIFICATION FAILURE message.
If the gNB-DU is not able to accept the SpCell ID IE in UE CONTEXT MODIFICATION REQUEST message, it shall reply with the UE CONTEXT MODIFICATION FAILURE message. 
If the Conditional Intra-DU Mobility Information IE was included and set to "CHO-initiation" or "CHO-replace" but the SpCell ID IE was not included in the UE CONTEXT MODIFICATION REQUEST message, the gNB-DU shall respond with the UE CONTEXT MODIFICATION FAILURE message with an appropriate cause value.
8.3.4.4	Abnormal Conditions
If the gNB-DU receives a UE CONTEXT MODIFICATION REQUEST message containing a E-UTRAN QoS IE for a GBR QoS DRB but where the GBR QoS Information IE is not present, the gNB-DU shall report the establishment of the corresponding DRB as failed in the DRB Failed to Setup List IE of the UE CONTEXT MODIFICATION RESPONSE message with an appropriate cause value.
If the gNB-DU receives a UE CONTEXT MODIFICATION REQUEST message containing a DRB QoS IE for a GBR QoS DRB but where the GBR QoS Flow Information IE is not present, the gNB-DU shall report the establishment of the corresponding DRBs as failed in the DRB Failed to Setup List IE of the UE CONTEXT MODIFICATION RESPONSE message with an appropriate cause value.
If the Delay Critical IE is included in the Dynamic 5QI Descriptor IE within the DRB QoS IE in the UE CONTEXT MODIFICATION REQUEST message and is set to the value "delay critical" but the Maximum Data Burst Volume IE is not present, the gNB-DU shall report the establishment of the corresponding DRB as failed in the DRB Failed to Setup List IE of the of the UE CONTEXT MODIFICATION RESPONSE message with an appropriate cause value. 
If one or more candidate cells in the Candidate Cells To Be Cancelled List IE included in the UE CONTEXT MODIFICATION REQUEST message were not prepared using the same UE-associated signaling connection, the gNB-DU shall ignore those non-associated candidate cells.
In case of "CHO-replace" when the Target gNB-DU UE F1AP ID IE is included, if the candidate cell in the SpCell ID IE included in the UE CONTEXT MODIFICATION REQUEST message was not prepared using the same UE-associated signalling connection, the gNB-DU shall ignore this candidate cell.
8.3.5	UE Context Modification Required (gNB-DU initiated)
8.3.5.1	General
The purpose of the UE Context Modification Required procedure is to modify the established UE Context, e.g., modifying and releasing radio bearer resources, or sidelink radio bearer resources or candidate cells in conditional handover or conditional PSCell change. The procedure uses UE-associated signalling.
8.3.5.2	Successful Operation

Figure 8.3.5.2-1: UE Context Modification Required procedure. Successful operation
The F1AP UE CONTEXT MODIFICATION REQUIRED message is initiated by the gNB-DU.
The gNB-CU reports the successful update of the UE context in the UE CONTEXT MODIFICATION CONFIRM message. 
For a given bearer for which PDCP CA duplication was already configured, if two DL UP TNL Information IEs are included in UE CONTEXT MODIFICATION REQUIRED message for a DRB, the gNB-CU shall include two UL UP TNL Information IEs in UE CONTEXT MODIFICATION CONFIRM message. The gNB-CU and gNB-DU use the UL UP TNL Information IEs and DL UP TNL Information IEs to support packet duplication for intra-gNB-DU CA as defined in TS 38.470 [2], and the first UP TNL Information IE is still for the primary path. 
For a given bearer for which PDCP CA duplication was already configured, if one or two Additional PDCP Duplication UP TNL Information IEs are included in the UE CONTEXT MODIFICATION REQUIRED message for a DRB, the gNB-CU shall, if supported, include one or two Additional PDCP Duplication UP TNL Information IEs in the UE CONTEXT MODIFICATION CONFIRM message. The gNB-CU and gNB-DU use the Additional PDCP Duplication UP TNL Information IEs to support packet duplication for intra-gNB-DU CA as defined in TS 38.470 [2].
If the BH Information IE is included in the UL UP TNL Information to be setup List IE or the Additional PDCP Duplication TNL List IE for a DRB, the gNB-DU shall, if supported, use the indicated BAP Routing ID and BH RLC channel for transmission of the corresponding GTP-U packets to the IAB-donor, as specified in TS 38.340 [30].
If the Resource Coordination Transfer Container IE is included in the UE CONTEXT MODIFICATION REQUIRED, the gNB-CU shall transparently transfer this information for the purpose of resource coordination as described in TS 36.423 [9], TS 38.423 [28].
For EN-DC operation, if the gNB-CU includes the Resource Coordination Transfer Information IE in the UE CONTEXT MODIFICATION CONFIRM message, the gNB-DU shall, if supported, use it for the purpose of resource coordination. If the gNB-CU received the MeNB Resource Coordination Information as defined in TS 36.423 [9], after completion of UE Context Modification Required procedures, the gNB-CU shall transparently transfer it to the gNB-DU via the Resource Coordination Transfer Container IE in the UE CONTEXT MODIFICATION CONFIRM message. The gNB-DU shall use the information received in the Resource Coordination Transfer Container IE for reception of MeNB Resource Coordination Information at the gNB acting as secondary node as described in TS 36.423 [9]. If the Resource Coordination E-UTRA Cell Information IE is included in the Resource Coordination Transfer Information IE, the gNB-DU shall store the information replacing previously received information for the same E-UTRA cell, and use the stored information for the purpose of resource coordination. If the Ignore PRACH Configuration IE is present and set to "true" the E-UTRA PRACH Configuration IE in the UE CONTEXT MODIFICATION CONFIRM message shall be ignored.
For NGEN-DC or NE-DC operation, if the gNB-CU includes the Resource Coordination Transfer Information IE in the UE CONTEXT MODIFICATION CONFIRM message, the gNB-DU shall, if supported, use it for the purpose of resource coordination. If the gNB-CU received the MR-DC Resource Coordination Information as defined in TS 38.423 [28], after completion of UE Context Modification Required procedures, the gNB-CU shall transparently transfer it to the gNB-DU via the Resource Coordination Transfer Container IE in the UE CONTEXT MODIFICATION CONFIRM message. The gNB-DU shall use the information received in the Resource Coordination Transfer Container IE for reception of MR-DC Resource Coordination Information at the gNB as described in TS 38.423 [28].
If the CellGroupConfig IE is included in the DU to CU RRC Information IE contained in the UE CONTEXT MODIFICATION REQUIRED message, the gNB-CU shall perform RRC Reconfiguration as described in TS 38.331 [8]. The CellGroupConfig IE shall transparently be signaled to the UE as specified in TS 38.331 [8].
If the UE CONTEXT MODIFICATION CONFIRM message includes the Execute Duplication IE, the gNB-DU shall perform CA based duplication, if configured, for the SRB for the included RRC-Container IE.
If the UE CONTEXT MODIFICATION REQUIRED message contains the RLC Status IE, the gNB-CU shall assume that RLC has been reestablished at the gNB-DU and may trigger PDCP data recovery. 
If the Candidate Cells To Be Cancelled List IE is included in the UE CONTEXT MODIFICATION REQUIRED message, the gNB-CU shall consider that only the resources reserved for the candidate cells identified by the included NR CGIs and associated to the UE-associated signaling identified by the gNB-CU UE F1AP ID IE and the gNB-CU UE F1AP ID IE are about to be released by the gNB-DU.
8.3.5.2A	Unsuccessful Operation

Figure 8.3.5.2A-1: UE Context Modification Required procedure. Unsuccessful operation.
In case none of the requested modifications of the UE context can be successfully performed, the gNB-CU shall respond with the UE CONTEXT MODIFICATION REFUSE message with an appropriate cause value.
8.3.5.3	Abnormal Conditions
If one or more candidate cells in the Candidate Cells To Be Cancelled List IE included in the UE CONTEXT MODIFICATION REQUIRED message were not prepared using the same UE-associated signaling connection, the gNB-CU shall ignore those non-associated candidate cells.
8.3.6	UE Inactivity Notification
8.3.6.1	General
This procedure is initiated by the gNB-DU to indicate the UE activity event.
The procedure uses UE-associated signalling.
8.3.6.2	Successful Operation

Figure 8.3.6.2-1: UE Inactivity Notification procedure.
The gNB-DU initiates the procedure by sending the UE INACTIVITY NOTIFICATION message to the gNB-CU. 
If the DRB ID IE is included in the DRB Activity Item IE in the UE INACTIVITY NOTIFICATION message, the DRB Activity IE shall also be included
8.3.6.3	Abnormal Conditions
Not applicable.
8.3.7	Notify
8.3.7.1	General
The purpose of the Notify procedure is to enable the gNB-DU to inform the gNB-CU that the QoS of an already established GBR DRB cannot be fulfilled any longer or that it can be fulfilled again. The procedure uses UE-associated signalling.
8.3.7.2	Successful Operation

Figure 8.3.7.2-1: Notify procedure. Successful operation. 
The gNB-DU initiates the procedure by sending a NOTIFY message. 
The NOTIFY message shall contain the list of the GBR DRBs associated with notification control for which the QoS is not fulfilled anymore or for which the QoS is fulfilled again by the gNB-DU. The gNB-DU may also indicate an alternative QoS parameters set which it can currently fulfil in the Current QoS Parameters Set Index IE.
Upon reception of the NOTIFY message, the gNB-CU may identify which are the affected PDU sessions and QoS flows. The gNB-CU may inform the 5GC that the QoS for these PDU sessions or QoS flows is not fulfilled any longer or it is fulfilled again.
8.3.7.3	Abnormal Conditions
Not applicable.
8.3.8	Access Success
8.3.8.1	General
The purpose of the Access Success procedure is to enable the gNB-DU to inform the gNB-CU of which cell the UE has successfully accessed during conditional handover or conditional PSCell change. The procedure uses UE-associated signalling.
8.3.8.2	Successful Operation

Figure 8.3.8.2-1: Access Success procedure. Successful operation. 
The gNB-DU initiates the procedure by sending a ACCESS SUCCESS message. 
Upon reception of the ACCESS SUCCESS message, the gNB-CU shall consider that the UE successfully accessed the cell indicated by the included NR CGI IE in this gNB-DU and consider all the other CHO preparations or conditional PSCell change preparations accepted for this UE under the same UE-associated signaling connection in this gNB-DU as cancelled.
Interaction with other procedure:
The gNB-CU may initiate UE Context Release procedure toward the other signalling connections or other candidate gNB-DUs for this UE, if any.
8.3.8.3	Abnormal Conditions
If the ACCESS SUCCESS message refers to a context that does not exist, the gNB-CU shall ignore the message.
8.4	RRC Message Transfer procedures
8.4.1	Initial UL RRC Message Transfer
8.4.1.1	General
The purpose of the Initial UL RRC Message Transfer procedure is to transfer the initial RRC message to the gNB-CU. The procedure uses non-UE-associated signaling.
8.4.1.2	Successful operation

Figure 8.4.1.2-1: Initial UL RRC Message Transfer procedure.
The establishment of the UE-associated logical F1-connection shall be initiated as part of the procedure.
If the DU to CU RRC Container IE is not included in the INITIAL UL RRC MESSAGE TRANSFER, the gNB-CU should reject the UE under the assumption that the gNB-DU is not able to serve such UE. If the gNB-DU is able to serve the UE, the gNB-DU shall include the DU to CU RRC Container IE and the gNB-CU shall configure the UE as specified in TS 38.331 [8]. The gNB-DU shall not include the ReconfigurationWithSync field in the CellGroupConfig IE as defined in TS 38.331 [8] of the DU to CU RRC Container IE.
If the SUL Access Indication IE is included in the INITIAL UL RRC MESSAGE TRANSFER, the gNB-CU shall consider that the UE has performed access on SUL carrier.
If the RRC-Container-RRCSetupComplete IE is included in the INITIAL UL RRC MESSAGE TRANSFER, the gNB-CU shall take it into account as specified in TS 38.401 [4].
8.4.1.3	Abnormal Conditions
Not applicable.
8.4.2	DL RRC Message Transfer
8.4.2.1	General
The purpose of the DL RRC Message Transfer procedure is to transfer an RRC message The procedure uses UE-associated signalling.
8.4.2.2	Successful operation

Figure 8.4.2.2-1: DL RRC Message Transfer procedure
If a UE-associated logical F1-connection exists, the DL RRC MESSAGE TRANSFER message shall contain the gNB-DU UE F1AP ID IE, which should be used by gNB-DU to lookup the stored UE context.If no UE-associated logical F1-connection exists, the UE-associated logical F1-connection shall be established at reception of the DL RRC MESSAGE TRANSFER message.
If the Index to RAT/Frequency Selection Priority IE is included in the DL RRC MESSAGE TRANSFER, the gNB-DU may use it for RRM purposes. If the Additional RRM Policy Index IE is included in the DL RRC MESSAGE TRANSFER, the gNB-DU may use it for RRM purposes.
The DL RRC MESSAGE TRANSFER message shall include, if available, the old gNB-DU UE F1AP ID IE so that the gNB-DU can retrieve the existing UE context in RRC connection reestablishment procedure, as defined in TS 38.401 [4].
The DL RRC MESSAGE TRANSFER message shall include, if SRB duplication is activated, the Execute Duplication IE, so that the gNB-DU can perform CA based duplication for the SRB.
If the gNB-DU identifies the UE-associated logical F1-connection by the gNB-DU UE F1AP ID IE in the DL RRC MESSAGE TRANSFER message and the old gNB-DU UE F1AP ID IE is included, it shall release the old gNB-DU UE F1AP ID and the related configurations associated with the old gNB-DU UE F1AP ID.
If the UE Context not retrievable IE set to "true" is included in the DL RRC MESSAGE TRANSFER, the DL RRC MESSAGE TRANSFER may contain the Redirected RRC message IE and use it as specified in TS 38.401 [4]. 
If the UE Context not retrievable IE set to "true" is included in the DL RRC MESSAGE TRANSFER, the DL RRC MESSAGE TRANSFER may contain the PLMN Assistance Info for Network Sharing IE, if available at the gNB-CU and may use it as specified in TS 38.401 [4].
If the DL RRC MESSAGE TRANSFER message contains the New gNB-CU UE F1AP ID IE, the gNB-DU shall, if supported, replace the value received in the gNB-CU UE F1AP ID IE by the value of the New gNB-CU UE F1AP ID and use it for further signalling.
Interactions with UE Context Release Request procedure:
If the UE Context not retrievable IE set to "true" is included in the DL RRC MESSAGE TRANSFER, the gNB-DU may trigger the UE Context Release Request procedure, as specified in TS 38.401 [4].
8.4.2.3	Abnormal Conditions
Not applicable.
8.4.3	UL RRC Message Transfer
8.4.3.1	General
The purpose of the UL RRC Message Transfer procedure is to transfer an RRC message as an UL PDCP-PDU to the gNB-CU. The procedure uses UE-associated signalling.
8.4.3.2	Successful operation

Figure 8.4.3.2-1: UL RRC Message Transfer procedure
When the gNB-DU has received from the radio interface an RRC message to which a UE-associated logical F1-connection for the UE exists, the gNB-DU shall send the UL RRC MESSAGE TRANSFER message to the gNB-CU including the RRC message as a RRC-Container IE. 
If the Selected PLMN ID IE is contained in the UL RRC MESSAGE TRANSFER message, the gNB-CU may use it as specified in TS 38.401 [4].
If the UL RRC MESSAGE TRANSFER message contains the New gNB-DU UE F1AP ID IE, the gNB-CU shall, if supported, replace the value received in the gNB-DU UE F1AP ID IE by the value of the New gNB-DU UE F1AP ID and use it for further signalling.
8.4.3.3	Abnormal Conditions
Not applicable.
8.4.4	RRC Delivery Report 
8.4.4.1	General
The purpose of the RRC Delivery Report procedure is to transfer to the gNB-CU information about successful delivery of DL PDCP-PDUs including RRC messages. The procedure uses UE-associated signalling.
8.4.4.2	Successful operation

Figure 8.4.4.2-1: RRC Delivery Report procedure.
When the gNB-DU has successfully delivered an RRC message to the UE for which the gNB-CU has requested a delivery report, the gNB-DU shall send the RRC DELIVERY REPORT message to the gNB-CU containng the RRC Delivery Status IE and the SRB ID IE. 
8.4.4.3	Abnormal Conditions
Not applicable.
8.5	Warning Message Transmission Procedures
8.5.1	Write-Replace Warning
8.5.1.1	General
The purpose of Write-Replace Warning procedure is to start or overwrite the broadcasting of warning messages. The procedure uses non UE-associated signalling.
8.5.1.2	Successful Operation

Figure 8.5.1.2-1: Write-Replace Warning procedure: successful operation
The gNB-CU initiates the procedure by sending a WRITE-REPLACE WARNING REQUEST message to the gNB-DU.
Upon receipt of the WRITE-REPLACE WARNING REQUEST message, the gNB-DU shall prioritise its resources to process the warning message.
The gNB-DU acknowledges the WRITE-REPLACE WARNING REQUEST message by sending a WRITE-REPLACE WARNING RESPONSE message to the gNB-CU.
Upon receipt of the WRITE-REPLACE WARNING REQUEST message, the gNB-DU shall include the Dedicated SI Delivery Needed UE List IE in the WRITE-REPLACE WARNING RESPONSE message for UEs that are unable to receive system information from broadcast.
If Dedicated SI Delivery Needed UE List IE is contained in the WRITE-REPLACE WARNING RESPONSE message, the gNB-CU should take it into account when informing the UE of the updated system information via the dedicated RRC message.
Upon reception of the Notification Information IE in the PWS System Information IE in the WRITE-REPLACE WARNING REQUEST message, the gNB-DU shall use this information to avoid that duplications trigger new broadcast or replace existing broadcast.
If the gNB-DU receives a WRITE-REPLACE WARNING REQUEST message with the Notification Information IE in the PWS System Information IE which are different from those of ongoing broadcast warning messages, and if the SIB Type IE is set to "8", the gNB-DU shall broadcast the received warning message concurrently with other ongoing messages.
If the gNB-DU receives a WRITE-REPLACE WARNING REQUEST message with the Notification Information IE in the PWS System Information IE which are different from those of ongoing broadcast warning messages, and if the SIB Type IE is set to the value other than ‘8’ , the gNB-DU shall use the newly received one to replace the ongoing broadcast warning message with the same value of SIB Type IE.
If the SIB Type IE in the PWS System Information IE in the WRITE-REPLACE WARNING REQUEST message is set to "8" and if a value "0" is received in the Number of Broadcast Requested IE and if the Repetition Period IE is different from "0", the gNB-DU shall broadcast the received warning message indefinitely.
If Additional SIB Message List IE is included in PWS System Information IE, the gNB-DU shall store all SIB message(s) in PWS System Information IE, and consider that the first segment of public warning message is included in SIB message IE, and the remaining segments are listed in Additional SIB Message List IE in segmentation sequence order.
8.5.1.3	Unsuccessful Operation
Not applicable.
8.5.1.4	Abnormal Conditions
If the gNB-DU receives a WRITE-REPLACE WARNING REQUEST message which does not include the Notification Information IE in the PWS System Information IE, the gNB-DU shall consider it as a logical error.
8.5.2	PWS Cancel
8.5.2.1	General
The purpose of the PWS Cancel procedure is to cancel an already ongoing broadcast of a warning message. The procedure uses non UE-associated signalling.
8.5.2.2	Successful Operation

Figure 8.5.2.2-1: PWS Cancel procedure: successful operation
The gNB-CU initiates the procedure by sending a PWS CANCEL REQUEST message to the gNB-DU.
The gNB-DU shall acknowledge the PWS CANCEL REQUEST message by sending the PWS CANCEL RESPONSE message.
If the Cancel-All Warning Messages Indicator IE is present in the PWS CANCEL REQUEST message, then the gNB-DU shall stop broadcasting and discard all warning messages for the area as indicated in the Cell Broadcast To Be Cancelled List IE or in all the cells of the gNB-DU if the Cell Broadcast To Be Cancelled List IE is not included. The gNB-DU shall acknowledge the PWS CANCEL REQUEST message by sending the PWS CANCEL RESPONSE message, and shall, if there is area to report where an ongoing broadcast was stopped successfully, include the Cell Broadcast Cancelled List IE with the Number of Broadcasts IE set to 0.
If the Cell Broadcast To Be Cancelled List IE is not included in the PWS CANCEL REQUEST message, the gNB-DU shall stop broadcasting and discard the warning message identified by the Message Identifier IE and the Serial Number IE in the Notification Information IE in all of the cells in the gNB-DU.
If the Notification Information IE is included in the PWS CANCEL REQUEST, the gNB-DU shall cancel broadcast of the public warning message identified by the Notification Information IE. 
If an area included in the Cell Broadcast To Be Cancelled List IE in the PWS CANCEL REQUEST message does not appear in the Cell Broadcast Cancelled List IE in the PWS CANCEL RESPONSE, the gNB-CU shall consider that the gNB-DU had no ongoing broadcast to stop for the public warning message identified, if present, by the Notification Information IE in that area.
If the Cell Broadcast Cancelled List IE is not included in the PWS CANCEL RESPONSE message, the gNB-CU shall consider that the gNB-DU had no ongoing broadcast to stop for the public warning message identified, if present, by the Notification Information IE.
8.5.2.3	Unsuccessful Operation
If the gNB-DU receives a PWS CANCEL REQUEST message which contains neither the Cancel-all Warning Messages Indicator IE nor the Notification Information IE, the gNB-DU shall consider it as a logical error.
8.5.2.4	Abnormal Conditions
Not applicable.
8.5.3	PWS Restart Indication
8.5.3.1	General
The purpose of PWS Restart Indication procedure is to inform the gNB-CU that PWS information for some or all cells of the gNB-DU are available for reloading from the CBC if needed. The procedure uses non UE-associated signalling.
8.5.3.2	Successful Operation

Figure 8.5.3.2-1: PWS restart indication
The gNB-DU initiates the procedure by sending a PWS RESTART INDICATION message to the gNB-CU.
8.5.3.3	Abnormal Conditions
Not applicable.
8.5.4	PWS Failure Indication
8.5.4.1	General
The purpose of the PWS Failure Indication procedure is to inform the gNB-CU that ongoing PWS operation for one or more cells of the gNB-DU has failed. The procedure uses non UE-associated signalling.
8.5.4.2	Successful Operation

Figure 8.5.4.2-1: PWS failure indication
The gNB-DU initiates the procedure by sending a PWS FAILURE INDICATION message to the gNB-CU. 
8.5.4.3	Abnormal Conditions
Not applicable.
8.6	System Information Procedures
8.6.1	System Information Delivery
8.6.1.1	General
The purpose of the System Information Delivery procedure is to command the gNB-DU to broadcast the requested Other SI. The procedure uses non-UE associated signalling.
8.6.1.2	Successful Operation

Figure 8.6.1.2-1: System Information Delivery procedure. Successful operation.
The gNB-CU initiates the procedure by sending a SYSTEM INFORMATION DELIVERY COMMAND message to the gNB-DU. 
Upon reception of the SYSTEM INFORMATION DELIVERY COMMAND message, the gNB-DU shall broadcast the requested Other SI, and delete the UE context corresponding to the Confirmed UE ID IE, if any.
Interactions with gNB-DU Configuration Update procedure:
Upon reception of SYSTEM INFORMATION DELIVERY COMMAND message, the gNB-DU Configuration Update procedure may be performed , and as part of such procedure the gNB-DU shall include the Dedicated SI Delivery Needed UE List IE in GNB-DU CONFIGURATION UPDATE message for UEs that are unable to receive system information from broadcast.
8.6.1.3	Abnormal Conditions
Not applicable.
8.7	Paging procedures
8.7.1	Paging 
8.7.1.1	General
The purpose of the Paging procedure is used to provide the paging information to enable the gNB-DU to page a UE. The procedure uses non-UE associated signalling.
8.7.1.2	Successful Operation

Figure 8.7.1.2-1: Paging procedure. Successful operation.
The gNB-CU initiates the procedure by sending a PAGING message.
The Paging DRX IE may be included in the PAGING message, and if present the gNB-DU may use it to determine the final paging cycle for the UE.
The Paging Priority IE may be included in the PAGING message, and if present the gNB-DU may use it according to TS 23.501 [21].
At the reception of the PAGING message, the gNB-DU shall perform paging of the UE in cells which belong to cells as indicated in the Paging Cell List IE.
The Paging Origin IE may be included in the PAGING message, and if present the gNB-DU shall transfer it to the UE.
8.7.1.3	Abnormal Conditions
Not applicable.
8.8	Trace Procedures
8.8.1	Trace Start
8.8.1.1	General
The purpose of the Trace Start procedure is to allow the gNB-CU to request the gNB-DU to initiate a trace session for a UE. The procedure uses UE-associated signalling.
8.8.1.2	Successful Operation

Figure 8.8.1.2-1: Trace start procedure: Successful Operation.
Upon reception of the TRACE START message, the gNB-DU shall initiate the requested trace session for the requested UE, as described in TS 32.422 [29]. In particular, the gNB-DU shall, if supported:
-	if the Trace Activation IE includes the MDT Activation IE set to "Immediate MDT and Trace" initiate the requested trace session and MDT session as described in TS 32.422 [29];
-	if the Trace Activation IE includes the MDT Activation IE set to "Immediate MDT Only" initiate the requested MDT session as described in TS 32.422 [29] and the gNB-DU shall ignore Interfaces To Trace IE, and Trace Depth IE;
8.8.1.3	Abnormal Conditions
Void.
8.8.2	Deactivate Trace
8.8.2.1	General
The purpose of the Deactivate Trace procedure is to allow the gNB-CU to request the gNB-DU to stop the trace session for the indicated trace reference. The procedure uses UE-associated signalling.
8.8.2.2	Successful Operation

Figure 8.8.2.2-1: Deactivate trace procedure: Successful Operation
Upon reception of the DEACTIVATE TRACE message, the gNB-DU shall stop the trace session for the indicated trace reference contained in the Trace ID IE, as described in TS 32.422 [29].
8.8.2.3	Abnormal Conditions
Void.
8.8.3	Cell Traffic Trace
8.8.3.1	General
The purpose of the Cell Traffic Trace procedure is to send the allocated Trace Recording Session Reference and the Trace Reference to the gNB-CU. The procedure uses UE-associated signalling.
8.8.3.2	Successful Operation

Figure 8.8.3.2-1: Cell Traffic Trace procedure. Successful operation.
The procedure is initiated with a CELL TRAFFIC TRACE message sent from the gNB-DU to the gNB-CU. 
If the Privacy Indicator IE is included in the message, the gNB-CU shall store the information so that it can be transferred towards the AMF.
8.8.3.3	Abnormal Conditions
Void.
8.9	Radio Information Transfer procedures
8.9.1	DU-CU Radio Information Transfer
8.9.1.1	General
The purpose of the DU-CU Radio Information Transfer procedure is to transfer radio-related information from the gNB-DU to the gNB-CU. The procedure uses non-UE-associated signalling.
8.9.1.2	Successful operation

Figure 8.9.1.2-1: DU-CU Radio Information Transfer procedure.
The gNB-DU initiates the procedure by sending the DU-CU RADIO INFORMATION TRANSFER message to the gNB-CU.
The gNB-CU considers that the RIM-RS Detection Status IE indicates the RIM-RS detection status of the cell identified by Aggressor Cell ID IE.
8.9.1.3	Abnormal Conditions
Not applicable.
8.9.2	CU-DU Radio Information Transfer
8.9.2.1	General
The purpose of the CU-DU Radio Information Transfer procedure is to transfer radio-related information from the gNB-CU to the gNB-DU. The procedure uses non-UE-associated signalling.
8.9.2.2	Successful operation

Figure 8.9.2.2-1: CU-DU Radio Information Transfer procedure.
The gNB-CU initiates the procedure by sending the CU-DU RADIO INFORMATION TRANSFER message to the gNB-DU. The gNB-DU considers that the RIM-RS Detection Status IE indicates the detection status of RIM-RS associated with Victim gNB Set ID IE.
8.9.2.3	Abnormal Conditions
Not applicable.
8.10	IAB Procedures
8.10.0	General
In this version of the specification, the IAB procedures are used to configure IAB-donor-DU or IAB-DU.
NOTE: 	The IAB procedures are applicable for IAB-nodes and IAB-donor-DU, where the term "gNB-DU" applies to IAB-DU and IAB-donor-DU, and the term "gNB-CU" applies to IAB-donor-CU, unless otherwise specified.
8.10.1	BAP Mapping Configuration
8.10.1.1	General
The BAP Mapping Configuration Procedure is initiated by the gNB-CU in order to configure the DL/UL routing information and/or traffic mapping information needed for the gNB-DU. The procedure uses non-UE associated signalling.
NOTE:	Implementation shall ensure the avoidance of potential race conditions, i.e. it shall ensure that conflicting traffic mapping configurations are not concurrently performed using the non-UE-associated BAP Mapping Configuration procedure and the UE-associated UE Context Management procedures.
8.10.1.2	Successful Operation


Figure 8.10.1.2-1: BAP Mapping Configuration procedure: Successful Operation
The gNB-CU initiates the procedure by sending BAP MAPPING CONFIGURATION message to the gNB-DU. The gNB-DU replies to the gNB-CU with BAP MAPPING CONFIGURATION ACKNOWLEDGE.
If BH Routing Information Added List IE is included in the BAP MAPPING CONFIGURATION message, the gNB-DU shall, if supported, store the BH routing information from this IE and use it for DL/UL traffic forwarding as specified in TS 38.340 [30]. If BH Routing Information Added List IE contains information for an existing BAP Routing ID, the gNB-DU shall, if supported, replace the previously stored routing information for this BAP Routing ID with the corresponding information in the BH Routing Information Added List IE.
If BH Routing Information Removed List IE is included in the BAP MAPPING CONFIGURATION message, the gNB-DU shall, if supported, remove the BH routing information according to such IE.
If the Traffic Mapping Information IE is included in the BAP MAPPING CONFIGURATION message, the gNB-DU shall, if supported, process the Traffic Mapping Information IE as follows:
-	if the IP to layer2 Traffic Mapping Info IE is included, the gNB-DU shall store the mapping information contained in the IP to layer2 Mapping Info To Add IE, if present, and remove the previously stored mapping information as indicated by the IP to layer2 Mapping Info To Remove IE, if present. The gNB-DU shall use the mapping information stored for the mapping of IP traffic to layer 2, as specified in TS 38.340 [30].
-	if the BAP layer BH RLC channel Mapping Info IE is included, the gNB-DU shall store the mapping information contained in the BAP layer BH RLC channel Mapping Info To Add IE, if present, and remove the previously stored mapping information as indicated by the BAP layer BH RLC channel Mapping Info To Remove IE, if present. The gNB-DU shall use the mapping information stored when forwarding traffic on BAP sublayer, as specified in TS 38.340 [30].
8.10.1.A	Unsuccessful Operation

Figure 8.10.1.3-1: BAP Mapping Configuration procedure: Unsuccessful Operation
If the gNB-DU cannot accept the configuration, it shall respond with a BAP MAPPING CONFIGURATION FAILURE and appropriate cause value.
If the BAP MAPPING CONFIGURATION FAILURE message includes the Time To Wait IE, the gNB-CU shall wait at least for the indicated time before reinitiating the BAP MAPPING CONFIGURATION message towards the same gNB-DU.
8.10.1.3	Abnormal Conditions
Not applicable.
8.10.2	gNB-DU Resource Configuration
8.10.2.1	General
The gNB-DU Resource Configuration procedure is initiated by the gNB-CU in order to configure the resource usage for a gNB-DU. The procedure uses non-UE associated signalling.
In this version of the specification, this procedure is used to configure IAB resources.
8.10.2.2	Successful Operation

Figure 8.10.2.2-1: gNB-DU Resource Configuration procedure: Successful Operation
The gNB-CU initiates the procedure by sending the GNB-DU RESOURCE CONFIGURATION message to gNB-DU. The gNB-DU replies to the gNB-CU with the GNB-DU RESOURCE CONFIGURATION ACKNOWLEDGE message.
For each cell in the Activated Cells to Be Updated List IE of the GNB-DU RESOURCE CONFIGURATION message, the gNB-DU shall store the resource configuration contained in the IAB-DU Cell Resource Configuration-Mode-Info IE and use it when performing scheduling in compliance with TS 38.213 [31].
If the Child-Node List IE is included in the GNB-DU RESOURCE CONFIGURATION message, for each child-node indicated by the gNB-CU UE F1AP ID IE and gNB-DU UE F1AP ID IE, and for each cell served by this child node indicated by the NR CGI IE in the Child-Node Cells List IE, the gNB-DU shall store the received information and use this information for scheduling, in compliance with TS 38.213 [31], clause 14.
8.10.2.B	Unsuccessful Operation

Figure 8.10.2.3-1: gNB-DU Resource Configuration procedure: Unsuccessful Operation
If the gNB-DU cannot accept the configuration, it shall respond with a GNB-DU RESOURCE CONFIGURATION FAILURE and appropriate cause value.
If the GNB-DU RESOURCE CONFIGURATION FAILURE message includes the Time To Wait IE, the gNB-CU shall wait at least for the indicated time before reinitiating the GNB-DU RESOURCE CONFIGURATION message towards the same gNB-DU.
8.10.2.3	Abnormal Conditions
Not applicable.
8.10.3	IAB TNL Address Allocation
8.10.3.1	General
The purpose of the IAB TNL Address Allocation procedure is to allocate TNL addresses to be used by the IAB-node(s). This procedure uses non-UE associated signalling.
NOTE:	This procedure is applicable for IAB-donor-DU, where the term "gNB-DU" applies to IAB-donor-DU, and the term "gNB-CU" applies to IAB-donor-CU.
8.10.3.2	Successful Operation

Figure 8.10.3.2-1: IAB TNL Address Allocation procedure: Successful Operation
The gNB-CU initiates the procedure by sending the IAB TNL ADDRESS REQUEST message to the gNB-DU. 
If the IAB TNL ADDRESS REQUEST message contains the IAB IPv4 Addresses Requested IE, the gNB-DU shall allocate the individual TNL address(es) accordingly and include these IPv4 address(es) in the IAB TNL ADDRESS RESPONSE message. 
If the IAB TNL ADDRESS REQUEST message contains the IAB IPv6 Request Type IE, the gNB-DU shall allocate the individual IPv6 address(es) or IPv6 address prefix(es) accordingly and include these IPv6 address(es) or IPv6 address prefix(es) in the IAB TNL ADDRESS RESPONSE message.
If the IAB TNL ADDRESS REQUEST message contains the IAB TNL Addresses to Remove List IE, the gNB-DU shall consider that the TNL address(es) and/or TNL address prefix(es) therein are no longer used by the IAB-node(s). In addition, if the IAB TNL ADDRESS REQUEST message only contains the IAB TNL Addresses to Remove List IE, the gNB-CU shall ignore the IAB Allocated TNL Address List IE in the IAB TNL ADDRESS RESPONSE message.
If the IAB TNL ADDRESS RESPONSE message contains the IAB TNL Address Usage IE in the IAB Allocated TNL Address List Item IE, the gNB-CU shall consider the indicated TNL address usage when allocating a TNL addressto an IAB-node. Otherwise, the gNB-CU shall consider that the TNL address can be used for all traffic when allocating the TNL address to an IAB-node.
8.10.3.C	Unsuccessful Operation

Figure 8.10.3.3-1: IAB TNL Address Allocation procedure: Unsuccessful Operation
If the gNB-DU cannot accept the request, it shall respond with an IAB TNL ADDRESS FAILURE and appropriate cause value.
If the IAB TNL ADDRESS FAILURE message includes the Time To Wait IE, the gNB-CU shall wait at least for the indicated time before reinitiating the IAB TNL ADDRESS REQUEST message towards the same gNB-DU.
8.10.3.3	Abnormal Conditions
Not applicable.
8.10.4	IAB UP Configuration Update
8.10.4.1	General
The purpose of the IAB UP Configuration Update procedure is to update the UP parameters including UL mapping configuration and the UL/DL UP TNL information between IAB-donor-CU and IAB-node. This procedure uses non-UE associated signalling.
NOTE:	This procedure is applicable for IAB-nodes, where the term "gNB-DU" applies to IAB-DU, and the term "gNB-CU" applies to IAB-donor-CU.
NOTE:	Implementation shall ensure the avoidance of potential race conditions, i.e. it shall ensure that the update of UP configuration (e.g. the UL/DL UP TNL information, UL mapping information) is not concurrently performed using the non-UE-associated IAB UP Configuration Update procedure and the UE-associated procedures for UE Context Management.
8.10.4.2	Successful Operation

Figure 8.10.4.2-1: IAB UP Configuration Update procedure: Successful Operation
The gNB-CU initiates the procedure by sending the IAB UP CONFIGURATION UPDATE REQUEST message to the gNB-DU. The gNB-DU replies to the gNB-CU with the IAB UP CONFIGURATION UPDATE RESPONSE message.
If the UL UP TNL Information to Update List IE is included in the IAB UP CONFIGURATION UPDATE REQUEST message, the gNB-DU shall perform the mapping according to the new received BH Information IE for each F1-U GTP tunnel indicated by the UL UP TNL Information IE. If the New UL UP TNL Information IE is included in UL UP TNL Information to Update List IE, the gNB-DU shall use it to replace the information of UL F1-U GTP tunnel indicated by the UL UP TNL Information IE.
If the UL UP TNL Address to Update List IE is included in the IAB UP CONFIGURATION UPDATE REQUEST message, the gNB-DU shall replace the old TNL address with the new TNL address for all the maintained UL F1-U GTP tunnels corresponding to the old TNL address.
If the DL UP TNL Address to Update List IE is included in the IAB UP CONFIGURATION UPDATE RESPONSE message, the gNB-CU shall replace the old TNL address with the new TNL address for all the maintained DL F1-U GTP tunnels corresponding to the old TNL address.
8.10.4.3	Unsuccessful Operation

Figure 8.10.4.3-1: IAB UP Configuration Update procedure: Unsuccessful Operation
If the gNB-DU receives an IAB UP CONFIGURATION UPDATE REQUEST message and cannot perform any update accordingly, it shall consider the update procedure as failed and respond with an IAB UP CONFIGURATION UPDATE FAILURE message and an appropriate cause value.
If the IAB UP CONFIGURATION UPDATE FAILURE message includes the Time To Wait IE, the gNB-CU shall wait at least for the indicated time before reinitiating the IAB UP CONFIGURATION UPDATE REQUEST message towards the same gNB-DU.
8.10.4.4	Abnormal Conditions
Not applicable.
8.11	Self Optimisation Support procedures 
8.11.1	Access and Mobility Indication
8.11.1.1	General
This procedure is initiated by gNB-CU to send the Access and Mobility related Information to gNB-DU.
The procedure uses non-UE-associated signalling.
8.11.1.2	Successful Operation

Figure 8.11.1.2-1: Access and Mobility Indication procedure. Successful operation
The Access and Mobility Indication procedure is initiated by ACCESS AND MOBILITY INDICATION message sent from gNB-CU to gNB-DU.
If the ACCESS AND MOBILITY INDICATION message contains the RACH Report Information List IE the gNB-DU shall take it into account for optimisation of RACH access procedures.
If the ACCESS AND MOBILITY INDICATION message contains the RLF Report Information List IE the gNB-DU shall take it into account for optimisation of mobility parameters.
8.11.1.3	Abnormal Conditions 
Not applicable.
8.12	Reference Time Information Reporting procedures
8.12.1	Reference Time Information Reporting Control
8.12.1.1	General
The purpose of the Reference Time Information Reporting Control procedure is to command the gNB-DU to send the requested accurate reference time information to the gNB-CU. The procedure uses non-UE associated signalling.
8.12.1.2	Successful Operation


Figure 8.12.1.2-1: Reference Time Information Reporting Control
The gNB-CU initiates the procedure by sending REFERENCE TIME INFORMATION REPORTING CONTROL message to the gNB-DU. Upon reception of the REFERENCE TIME INFORMATION REPORTING CONTROL message, the gNB-DU shall, if supported, perform the requested reference time information reporting action.
The Report Type IE indicates to the gNB-DU whether:
-	to report on demand;
-	to report periodic, with a frequency as specified by the Report Periodicity IE;
-	to stop periodic reporting.
8.12.1.3	Abnormal Conditions
Not applicable.
8.12.2	Reference Time Information Report
8.12.2.1	General
The purpose of the Reference Time Information Report procedure is to report the accurate reference time information from the gNB-DU to the gNB-CU. The procedure uses non-UE associated signalling.
8.12.2.2	Successful Operation

Figure 8.12.2-2-1: Reference Time Information Report
The gNB-DU initiates the procedure by sending a REFERENCE TIME INFORMATION REPORT message to the gNB-CU. The REFERENCE TIME INFORMATION REPORT message may be used as a response to the REFERENCE TIME INFORMATION REPORTING CONTROL message.
8.12.2.3	Abnormal Conditions
Not applicable.
8.13	Positioning Procedures
8.13.1	Positioning Assistance Information Control
8.13.1.1	General
The purpose of the Positioning Assistance Information Control procedure is to allow the gNB-CU to signal positioning assistance information to the gNB-DU for positioning assistance information broadcasting. The procedure uses non-UE-associated signalling.
8.13.1.2	Successful Operation

Figure 8.13.1.2-1: Positioning Assistance Information Control procedure
The gNB-CU initiates the procedure by sending a POSITIONING ASSISTANCE INFORMATION CONTROL message.
If the Positioning Assistance Information IE is included in the POSITIONING ASSISTANCE INFORMATION CONTROL message, the gNB-DU shall, if supported, replace any previously stored positioning assistance information and use the received information to configure positioning assistance information broadcasting as specified in TS 38.455 [37].
If the Broadcast IE is included in the POSITIONING ASSISTANCE INFORMATION CONTROL message and set to "start", the gNB-DU may start broadcasting the positioning assistance information. If the Broadcast IE is included in the POSITIONING ASSISTANCE INFORMATION CONTROL message and set to "stop", the gNB-DU may stop broadcasting the positioning assistance information.
If the Positioning Broadcast Cells IE is included in the POSITIONING ASSISTANCE INFORMATION CONTROL message, the gNB-DU shall, if supported, consider that the received assistance information is applicable to the cells in this IE.
Interaction with the Positioning Assistance Information Feedback procedure:
If the Routing ID IE is included in the POSITIONING ASSISTANCE INFORMATION CONTROL message, the gNB-DU shall, if supported, store this information and include it in any future POSITIONING ASSISTANCE INFORMATION FEEDBACK messages associated to the requested positioning assistance information broadcasting.
8.13.1.3	Abnormal Conditions 
If the Broadcast IE is included in the POSITIONING ASSISTANCE INFORMATION CONTROL message and set to "start", and no positioning assistance information is available, the gNB-DU shall consider the procedure as failed.
If neither the Positioning Assistance Information IE nor the Broadcast IE are included in the POSITIONING ASSISTANCE INFORMATION CONTROL message, the gNB-DU shall consider the procedure as failed.
8.13.2	Positioning Assistance Information Feedback
8.13.2.1	General
The purpose of the Positioning Assistance Information Feedback procedure is to allow the gNB-DU to give feedback to the gNB-CU on positioning assistance information broadcasting. The procedure uses non-UE-associated signalling.
8.13.2.2	Successful Operation

Figure 8.13.2.2-1: Positioning Assistance Information Feedback procedure
If the Positioning Assistance Information Failure List IE is included in the POSITIONING ASSISTANCE INFORMATION FEEDBACK message, the gNB-CU shall consider that positioning assistance information broadcasting could not be configured for the relevant information.
If the Positioning Broadcast Cells IE is included in the POSITIONING ASSISTANCE INFORMATION FEEDBACK message, the gNB-CU shall consider that the feedback provided is applicable to the cells in this IE.
If the Routing ID IE is included in the POSITIONING ASSISTANCE INFORMATION FEEDBACK message, the gNB-CU may use this information to identify the positioning assistance information broadcasting for which feedback is provided.
8.13.2.3	Abnormal Conditions
Void.
8.13.3	Positioning Measurement
8.13.3.1	General
The purpose of the Positioning Measurement procedure is to allow the gNB-CU to request one or more TRPs in the gNB-DU to perform and report positioning measurements. The procedure uses non-UE-associated signalling.
8.13.3.2	Successful Operation

Figure 8.13.3.2-1: Positioning Measurement procedure: successful operation
The gNB-CU initiates the procedure by sending a POSITIONING MEASUREMENT REQUEST message to the gNB-DU, indicating in the TRP Measurement Request List IE the TRP(s) from which measurements are requested. The gNB-DU node shall use the included information to configure positioning measurements by the indicated TRP(s). If at least one of the requested measurements has been successful for at least one of the TRPs, the gNB-DU shall reply with the POSITIONING MEASUREMENT RESPONSE message including the Positioning Measurement Response List IE..
If the Positioning Report Characteristics IE is set to "OnDemand", the gNB-DU shall return the corresponding measurement results in the Positioning Measurement Result List IE in the POSITIONING MEASUREMENT RESPONSE message, and the gNB-CU shall consider that this reporting has been terminated by the gNB-DU.
If the Measurement Beam Information Request IE is included in the POSITIONING MEASUREMENT REQUEST message, the gNB-DU node shall include the Measurement Beam Information IE in the Positioning Measurement Result IE of the POSITIONING MEASUREMENT RESPONSE message.
If the Measurement Quality IE is included in the Measurement Result IE in the POSITIONING MEASUREMENT RESPONSE message, the gNB-CU may use it for further signalling. If the Measurement Quality IE includes the Zenith Quality IE, the gNB-CU may use it for further signalling.
If the System Frame Number IE and/or the Slot Number IE are included in the POSITIONING MEASUREMENT REQUEST message, the gNB-DU node shall, if supported, consider that the respective information indicates the activation time of SRS transmission.
Interaction with the Positioning Measurement Report procedure:
If the Positioning Report Characteristics IE is set to "Periodic", the gNB-DU shall initiate the corresponding measurements, and it shall reply with the POSITIONING MEASUREMENT RESPONSE message without including any measurement results in the message. The gNB-DU shall then periodically initiate the Positioning Measurement Report procedure for the corresponding measurements, with the requested reporting periodicity.
8.13.3.3	Unsuccessful Operation

Figure 8.13.3.3-1: Positioning Measurement procedure: unsuccessful operation
If the gNB-DU is unable to configure any of the requested positioning measurements for any of the TRPs in the TRP Measurement Request List IE of the POSITIONING MEASUREMENT REQUEST message, it shall respond with a POSITIONING MEASUREMENT FAILURE message.
8.13.3.4	Abnormal Conditions
If the gNB-DU receives a POSITIONING MEASUREMENT REQUEST message containing an LMF Measurement ID corresponding to an ongoing positioning measurement, it shall consider the procedure as failed and initiate local error handling.
8.13.4	Positioning Measurement Report
8.13.4.1	General
The purpose of the Positioning Measurement Report procedure is for the gNB-DU to report positioning measurements to the gNB-CU. The procedure uses non-UE-associated signalling.
8.13.4.2	Successful Operation

Figure 8.13.4.2-1: Positioning Measurement Report procedure: successful operation
The gNB-DU initiates the procedure by sending a POSITIONING MEASUREMENT REPORT message. The POSITIONING MEASUREMENT REPORT message contains the positioning measurement results according to the associated measurement configuration.
8.13.4.3	Unsuccessful Operation
Not applicable.
8.13.4.4	Abnormal Conditions
Not applicable.
8.13.5	Positioning Measurement Abort
8.13.5.1	General
The purpose of the Positioning Measurement Abort procedure is to enable the gNB-CU to abort an on-going measurement. The procedure uses non-UE-associated signalling.
8.13.5.2	Successful Operation

Figure 8.13.5.2-1: Positioning Measurement Abort procedure: successful operation
The gNB-CU initiates the procedure by generating a POSITIONING MEASUREMENT ABORT message. Upon receiving this message, the gNB-DU shall terminate the on-going measurement identified by the RAN Measurement ID IE and may release any resources previously allocated for the same measurement.
8.13.5.3	Unsuccessful Operation
Not applicable.
8.13.5.4	Abnormal Conditions
If the gNB-DU cannot identify the previously requested measurement to be aborted, it shall ignore the POSITIONING MEASUREMENT ABORT message.
8.13.6	Positioning Measurement Failure Indication
8.13.6.1	General
The purpose of the Positioning Measurement Failure Indication procedure is for the gNB-DU to notify the gNB-CU that the positioning measurements previously requested with the Positioning Measurement procedure can no longer be reported. The procedure uses non-UE-associated signalling.
8.13.6.2	Successful Operation

Figure 8.13.6.2-1: Positioning Measurement Failure Indication procedure: successful operation
Upon reception of the POSITIONING MEASUREMENT FAILURE INDICATION message, the gNB-CU shall consider that the indicated positioning measurements have been terminated by the gNB-DU.
8.13.6.3	Unsuccessful Operation
Not applicable.
8.13.6.4	Abnormal Conditions
Not applicable.
8.13.7	Positioning Measurement Update
8.13.7.1	General
The purpose of the Positioning Measurement Update procedure is to modify one or more periodic positioning measurements performed by the gNB-DU. The procedure uses non-UE-associated signalling.
8.13.7.2	Successful Operation

Figure 8.13.7.2-1: Positioning Measurement Update procedure: successful operation
The gNB-CU initiates the procedure by generating a POSITIONING MEASUREMENT UPDATE message. Upon receiving the message, the gNB-DU shall overwrite the previously received measurement configuration for the corresponding measurements.
8.13.7.3	Unsuccessful Operation
Not applicable.
8.13.7.4	Abnormal Conditions
If the gNB-DU cannot identify the given positioning measurements, it shall regard the procedure as failed and initiate local error handling.
8.13.8	TRP Information Exchange
8.13.8.1	General
The purpose of the TRP Information Exchange procedure is to allow the gNB-CU to request the gNB-DU to provide detailed information for TRPs hosted by the gNB-DU. The procedure uses non-UE-associated signalling.
8.13.8.2	Successful Operation

Figure 8.13.8.2-1: TRP Information Exchange procedure, successful operation
The gNB-CU initiates the procedure by sending a TRP INFORMATION REQUEST message. The gNB-DU responds with a TRP INFORMATION RESPONSE message that contains the requested TRP information.
If the TRP List IE is included in the TRP INFORMATION REQUEST message, the gNB-DU should include in the TRP INFORMATION RESPONSE message, the requested information for all TRPs included in the TRP List IE. 
If the TRP List IE is not included in the TRP INFORMATION REQUEST message, the gNB-DU should include the requested information for all TRPs hosted by the gNB-DU in the TRP INFORMATION RESPONSE message.
If the PRS Muting IE is included in the PRS Configuration IE in the TRP INFORMATION RESPONSE message, the gNB-CU may use it for further signaling.
If the  QCL Info IE is included in the PRS Configuration IE in the TRP INFORMATION RESPONSE message, the gNB-CU may use it for further signaling.
If the DL-PRS Resource Coordinates IE is included in the Geographical Coordinates IE in the TRP Information IE in the TRP INFORMATION RESPONSE message, the gNB-CU may use it for further signaling.
8.13.8.3	Unsuccessful Operation

Figure 8.13.8.3-1: TRP Information Exchange procedure, unsuccessful operation
If the gNB-DU cannot provide any of the requested information, the gNB-DU shall respond with a TRP INFORMATION FAILURE message.
8.13.9	Positioning Information Exchange
8.13.9.1	General
The Positioning Information Exchange procedure is initiated by the gNB-CU to indicate to the gNB-DU the need to configure the UE to transmit SRS signals and to retrieve the SRS configuration from the gNB-DU. The procedure uses UE-associated signalling.
8.13.9.2	Successful Operation

Figure 8.13.9.2-1: Positioning Information Exchange procedure, successful operation
The gNB-CU initiates the procedure by sending a POSITIONING INFORMATION REQUEST message to the gNB-DU.
If the Requested SRS Transmission Characteristics IE is included in the POSITIONING INFORMATION REQUEST message, the gNB-DU may take this information into account when configuring SRS transmissions for the UE, and it shall include the SRS Configuration IE and the SFN Initialisation Time IE in the POSITIONING INFORMATION RESPONSE message.
If the Spatial Relation Information per SRS Resource IE and the Periodicity List IE are both included in the Requested SRS Transmission Characteristics IE, the gNB-DU shall consider that the Spatial Relation per SRS Resource Item IE and the Periodicity List Item IE have one-to-one mapping relation.
Interaction with the UE Context Modification Required (gNB-DU initiated) procedure:
The UE Context Modification Required (gNB-DU initiated) procedure may be performed before the POSITIONING INFORMATION RESPONSE message.
8.13.9.3	Unsuccessful Operation

Figure 8.13.9.3-1: Positioning Information Exchange procedure, unsuccessful operation
If the Requested SRS Transmission Characteristics IE is included in the POSITIONING INFORMATION REQUEST message and the gNB-DU is unable to configure any SRS transmissions for the UE, the gNB-DU shall respond with a POSITIONING INFORMATION FAILURE message.
8.13.10	Positioning Activation
8.13.10.1	General
The Positioning Activation procedure is initiated by the gNB-CU to request the gNB-DU to activate semi-persistent or trigger aperiodic UL SRS transmission by the UE. The procedure uses UE-associated signalling.
8.13.10.2	Successful Operation

Figure 8.13.10.2-1: Positioning Activation procedure, successful operation
The gNB-CU initiates the procedure by sending a POSITIONING ACTIVATION REQUEST message to the gNB-DU.
For semi-persistent UL SRS, the POSITIONING ACTIVATION REQUEST message includes an indication of the UL SRS resource set to be activated, and may include the spatial relation for the semi-persistent UL SRS resource to be activated. For aperiodic UL SRS, if the SRS Resource Trigger IE is included in the POSITIONING ACTIVATION REQUEST message, the gNB-DU shall take the value of this IE into account when triggering aperiodic SRS transmission by the UE. 
If the Activation Time IE is included in the POSITIONING ACTIVATION REQUEST message, the gNB-DU shall take the indicated value as the requested time for activation of the UE’s SRS transmission.
Following successful activation of UL SRS transmission in the UE, the gNB-DU shall respond with a POSITIONING ACTIVATION RESPONSE message. If the POSITIONING ACTIVATION RESPONSE message includes the System Frame Number and/or the Slot Number IEs, the gNB-CU shall consider that the respective information indicates the activation time of SRS transmission by the UE.
8.13.10.3	Unsuccessful Operation

Figure 8.13.10.3-1: Positioning Activation procedure, unsuccessful operation
If the gNB-DU is unable to activate UL SRS transmission in the UE, it shall respond with a POSITIONING ACTIVATION FAILURE message.
If the gNB-DU is unable to trigger the aperiodic SRS transmission with the indicated SRS Resource Trigger IE, it shall respond with a POSITIONING ACTIVATION FAILURE message with an appropriate cause value
8.13.10.4	Abnormal Conditions
Void.
8.13.11	Positioning Deactivation
8.13.11.1	General
The Positioning Deactivation procedure is initiated by the gNB-CU to indicate to the gNB-DU node that UL SRS transmission should be deactivated in the UE. The procedure uses UE-associated signalling.
8.13.11.2	Successful Operation

Figure 8.13.11.2-1: Positioning Deactivation procedure, successful operation
The gNB-CU initiates the procedure by sending a POSITIONING DEACTIVATION message to the gNB-DU, including an indication of the UL SRS resources to be deactivated.
8.13.11.3	Unsuccessful Operation
Not Applicable.
8.13.11.4	Abnormal Conditions
Void.
8.13.12	E-CID Measurement Initiation
8.13.12.1	General
The purpose of E-CID Measurement Initiation procedure is to allow the gNB-CU to request the gNB-DU to report E-CID measurements used by LMF to compute the location of the UE. The procedure uses UE-associated signalling.
8.13.12.2	Successful Operation

Figure 8.13.12.2-1: E-CID Measurement Initiation procedure, successful operation
The gNB-CU initiates the procedure by sending an E-CID MEASUREMENT INITIATION REQUEST message. If the gNB-DU is able to initiate the requested E-CID measurements, it shall reply with the E-CID MEASUREMENT INITIATION RESPONSE message.
If the E-CID Report Characteristics IE is set to "OnDemand", the gNB-DU shall return the result of the measurement in the E-CID MEASUREMENT INITIATION RESPONSE message including, if available, the Geographical Coordinates IE in the E-CID Measurement Result IE and the Cell Portion ID IE, and the gNB-CU shall consider that the E-CID measurements for the UE have been terminated by the gNB-DU. The Measured Results List IE shall be included in the E-CID Measurement Result IE of the E-CID MEASUREMENT INITIATION RESPONSE message when measurement quantities other than "Default" have been requested.
Interaction with the E-CID Measurement Report procedure:
If the E-CID Report Characteristics IE is set to "Periodic", the gNB-DU shall initiate the requested measurements and shall reply with the E-CID MEASUREMENT INITIATION RESPONSE message without including either the E-CID Measurement Result IE or the Cell Portion ID IE in this message. The gNB-DU shall then periodically initiate the E-CID Measurement Report procedure for the measurements, with the requested reporting periodicity.
8.13.12.3	Unsuccessful Operation

Figure 8.13.12.3-1: E-CID Measurement Initiation procedure, unsuccessful operation
If the gNB-DU is not able to initiate at least one of the requested E-CID measurements, the gNB-DU shall respond with an E-CID MEASUREMENT INITIATION FAILURE message.
8.13.13	E-CID Measurement Failure Indication
8.13.13.1	General
The purpose of the E-CID Measurement Failure Indication procedure is for the gNB-DU to notify the gNB-CU that the E-CID measurements previously requested with the E-CID Measurement Initiation procedure can no longer be reported. The procedure uses UE-associated signalling.
8.13.13.2	Successful Operation

Figure 8.13.13.2-1: E-CID Measurement Failure Indication, successful operation
Upon reception of the E-CID MEASUREMENT FAILURE INDICATION message, the gNB-CU shall consider that the E-CID measurements for the UE have been terminated by the gNB-DU.
8.13.13.3	Unsuccessful Operation
Not applicable.
8.13.14	E-CID Measurement Report
8.13.14.1	General
The purpose of E-CID Measurement Report procedure is for the gNB-DU to provide the E-CID measurements for the UE to the gNB-CU. The procedure uses UE-associated signalling.
8.13.14.2	Successful Operation

Figure 8.13.14.2-1: E-CID Measurement Report procedure, successful operation
The gNB-DU initiates the procedure by sending an E-CID MEASUREMENT REPORT message. The E-CID MEASUREMENT REPORT message contains the E-CID measurement results according to the measurement configuration in the respective E-CID MEASUREMENT INITIATION REQUEST message.
The Measured Results List IE shall be included in the E-CID Measurement Result IE of the E-CID MEASUREMENT REPORT message when measurement quantities other than "Default" have been requested.
If available, the gNB-DU shall include the Geographical Coordinates IE in the E-CID Measurement Result IE in the E-CID MEASUREMENT REPORT message.
If available, the gNB-DU shall include the Cell Portion ID IE in the E-CID MEASUREMENT REPORT message.
8.13.14.3	Unsuccessful Operation
Not applicable.
8.13.15	E-CID Measurement Termination
8.13.15.1	General
The purpose of E-CID Measurement Termination procedure is to terminate periodical E-CID measurements for the UE performed by the gNB-DU. The procedure uses UE-associated signalling.
8.13.15.2	Successful Operation

Figure 8.13.15.2-1: E-CID Measurement Termination procedure, successful operation
The gNB-CU initiates the procedure by generating an E-CID MEASUREMENT TERMINATION COMMAND message. 
8.13.15.3	Unsuccessful Operation
Not applicable.
8.13.16	Positioning Information Update
8.13.16.1	General
The Positioning Information Update procedure is initiated by the gNB-DU to indicate to the gNB-CU that a change has occurred in the SRS configuration. The procedure uses UE-associated signalling.
8.13.16.2	Successful Operation

Figure 8.13.16.2-1: Positioning Information Update procedure, successful operation
The gNB-DU initiates the procedure by sending a POSITIONING INFORMATION UPDATE message to the gNB-CU.
If the SRS Configuration IE is included in the POSITIONING INFORMATION UPDATE message, the gNB-CU shall consider this information as the updated SRS Configuration for the UE. If the SFN Initialisation Time IE is included in the POSITIONING INFORMATION UPDATE message, the gNB-CU shall consider this information as the SFN Initialisation Time associated to the SRS Configuration.
8.13.16.3	Unsuccessful Operation
Not Applicable.
8.13.16.4	Abnormal Conditions
Void.
9	Elements for F1AP Communication
9.1	General
Subclauses 9.2 and 9.3 present the F1AP message and IE definitions in tabular format. The corresponding ASN.1 definition is presented in subclause 9.4. In case there is contradiction between the tabular format and the ASN.1 definition, the ASN.1 shall take precedence, except for the definition of conditions for the presence of conditional IEs, where the tabular format shall take precedence. 
The messages have been defined in accordance to the guidelines specified in TR 25.921 [14].
When specifying IEs which are to be represented by bitstrings, if not otherwise specifically stated in the semantics description of the concerned IE or elsewhere, the following principle applies with regards to the ordering of bits:
-	The first bit (leftmost bit) contains the most significant bit (MSB);
-	The last bit (rightmost bit) contains the least significant bit (LSB);
-	When importing bitstrings from other specifications, the first bit of the bitstring contains the first bit of the concerned information;
The following attributes are used for the tabular description of the messages and information elements: Presence, Range Criticality and Assigned Criticality. Their definition and use can be found in TS 38.413 [3].
9.2	Message Functional Definition and Content
9.2.1	Interface Management messages
9.2.1.1	RESET
This message is sent by both the gNB-CU and the gNB-DU and is used to request that the F1 interface, or parts of the F1 interface, to be reset.
Direction: gNB-CU  gNB-DU and gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
CHOICE Reset Type
M



YES
reject
>F1 interface






>>Reset All
M

ENUMERATED (Reset all,...)

-

>Part of F1 interface






>>UE-associated logical F1-connection list

1


-

>>>UE-associated logical F1-connection Item

1 .. <maxnoofIndividualF1ConnectionsToReset>


EACH
reject
>>>> gNB-CU UE F1AP ID
O

9.3.1.4

-

>>>> gNB-DU UE F1AP ID
O

9.3.1.5

-


Range bound
Explanation
maxnoofIndividualF1ConnectionsToReset
Maximum no. of UE-associated logical F1-connections allowed to reset in one message. Value is 65536.

9.2.1.2	RESET ACKNOWLEDGE
This message is sent by both the gNB-CU and the gNB-DU as a response to a RESET message.
Direction: gNB-DU  gNB-CU and gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
UE-associated logical F1-connection list

0..1


YES
ignore
>UE-associated logical F1-connection Item

1 .. <maxnoofIndividualF1ConnectionsToReset>


EACH
ignore
>>gNB-CU UE F1AP ID
O

9.3.1.4

-

>>gNB-DU UE F1AP ID
O

9.3.1.5

-

Criticality Diagnostics
O

9.3.1.3

YES
ignore

Range bound
Explanation
maxnoofIndividualF1ConnectionsToReset
Maximum no. of UE-associated logical F1-connections allowed to reset in one message. Value is 65536.

9.2.1.3	ERROR INDICATION
This message is sent by both the gNB-CU and the gNB-DU and is used to indicate that some error has been detected in the node.
Direction: gNB-CU  gNB-DU and gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23
This IE is ignored if received in UE associated signalling message.
YES
reject
gNB-CU UE F1AP ID
O

9.3.1.4

YES
ignore
gNB-DU UE F1AP ID
O

9.3.1.5

YES
ignore
Cause
O

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.4	F1 SETUP REQUEST
This message is sent by the gNB-DU to transfer information associated to an F1-C interface instance.
NOTE:	If a TNL association is shared among several F1-C interface instances, several F1 Setup procedures are issued via the same TNL association after that TNL association has become operational.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
gNB-DU ID
M

9.3.1.9

YES
reject
gNB-DU Name
O

PrintableString(SIZE(1..150,...))

YES
ignore
gNB-DU Served Cells List

0.. 1

List of cells configured in the gNB-DU
YES
reject
>gNB-DU Served Cells Item

1.. <maxCellingNBDU>


EACH
reject
>>Served Cell Information
M

9.3.1.10
Information about the cells configured in the gNB-DU
-

>>gNB-DU System Information
O

9.3.1.18
RRC container with system information owned by gNB-DU
-

gNB-DU RRC version 
M

RRC version 9.3.1.70

YES
reject
Transport Layer Address Info
O

9.3.2.5

YES
ignore
BAP Address
O

9.3.1.111
Indicates a BAP address assigned to the IAB-node.
YES
ignore
Extended gNB-DU Name
O

9.3.1.205

YES
ignore

Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.

9.2.1.5	F1 SETUP RESPONSE
This message is sent by the gNB-CU to transfer information associated to an F1-C interface instance.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
gNB-CU Name
O

PrintableString(SIZE(1..150,...))
Human readable name of the gNB-CU. 
YES
ignore
Cells to be Activated List

0.. 1


YES
reject
>Cells to be Activated List Item

1.. <maxCellingNBDU>

List of cells to be activated
EACH
reject
>> NR CGI
M

9.3.1.12

-

>> NR PCI 
O

INTEGER (0..1007)
Physical Cell ID
-

>>gNB-CU System Information
O

9.3.1.42
RRC container with system information owned by gNB-CU 
YES
reject
>>Available PLMN List
O

9.3.1.65

YES
ignore
>>Extended Available PLMN List
O

9.3.1.76
This is included if Available PLMN List IE is included and if more than 6 Available PLMNs is to be signalled. 
YES
ignore
>>IAB Info IAB-donor-CU
O

9.3.1.105
IAB-related configuration sent by the IAB-donor-CU.
YES
ignore
>>Available SNPN ID List
O

9.3.1.163
Indicates the available SNPN ID list.
If this IE is included, the content of the Available PLMN List IE and Extended Available PLMN List IE if present in the Cells to be Activated List Item IE is ignored.
YES
ignore
gNB-CU RRC version 
M

RRC version 9.3.1.70

YES
reject
Transport Layer Address Info
O

9.3.2.5

YES
ignore
Uplink BH Non-UP Traffic Mapping
O

9.3.1.103

YES
reject
BAP Address
O

9.3.1.111
Indicates a BAP address assigned to the IAB-donor-DU.
YES
ignore
Extended gNB-CU Name
O

9.3.1.206

YES
ignore

Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.

9.2.1.6	F1 SETUP FAILURE
This message is sent by the gNB-CU to indicate F1 Setup failure.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Time to wait
O

9.3.1.13

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.7	GNB-DU CONFIGURATION UPDATE
This message is sent by the gNB-DU to transfer updated information associated to an F1-C interface instance.
NOTE:	If F1-C signalling transport is shared among several F1-C interface instance, this message may transfer updated information associated to several F1-C interface instances.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Served Cells To Add List

0..1

Complete list of added cells served by the gNB-DU
YES
reject
>Served Cells To Add Item

1 .. <maxCellingNBDU>


EACH
reject
>>Served Cell Information
M

9.3.1.10
Information about the cells configured in the gNB-DU
-

>>gNB-DU System Information
O

9.3.1.18
RRC container with system information owned by gNB-DU
-

Served Cells To Modify List

0..1

Complete list of modified cells served by the gNB-DU
YES
reject
>Served Cells To Modify Item

1 .. <maxCellingNBDU>


EACH
reject
>>Old NR CGI
M

NR CGI
9.3.1.12

-

>>Served Cell Information
M

9.3.1.10
Information about the cells configured in the gNB-DU
-

>>gNB-DU System Information
O

9.3.1.18
RRC container with system information owned by gNB-DU
-

Served Cells To Delete List

0..1

Complete list of deleted cells served by the gNB-DU
YES
reject
>Served Cells To Delete Item

1.. <maxCellingNBDU>


EACH
reject
>>Old NR CGI
M

NR CGI
9.3.1.12

-

Cells Status List

0..1

Complete list of active cells
YES
reject
> Cells Status Item

0 .. <maxCellingNBDU>


EACH
reject
>> NR CGI
M

9.3.1.12

-

>>Service Status
M

9.3.1.68

-

Dedicated SI Delivery Needed UE List

0..1

List of UEs unable to receive system information from broadcast
YES
ignore
> Dedicated SI Delivery Needed UE Item

1 .. <maxnoofUEIDs>


EACH
ignore
>>gNB-CU UE F1AP ID
M

9.3.1.4

-

>>NR CGI
M

9.3.1.12

-

gNB-DU ID
O

9.3.1.9

YES
reject
gNB-DU TNL Association To Remove List 

0..1


YES
reject
>gNB-DU TNL Association To Remove Item IEs

1..<maxnoofTNLAssociation>


EACH
reject
>>TNL Association Transport Layer Address
M

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-DU.
-
-
>>TNL Association Transport Layer Address gNB-CU
O

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-CU
-
-
Transport Layer Address Info
O

9.3.2.5

YES
ignore
gNB-DU Name
O

PrintableString(SIZE(1..150,...))
Human readable name of the gNB-DU.
YES
ignore
Extended gNB-DU Name
O

9.3.1.205

YES
ignore

Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.
maxnoofUEIDs
Maximum no. of UEs that can be served by a gNB-DU. Value is 65536.
maxnoofTNLAssociations
Maximum numbers of TNL Associations between the gNB-CU and the gNB-DU. Value is 32.

9.2.1.8	GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE
This message is sent by a gNB-CU to a gNB-DU to acknowledge update of information associated to an F1-C interface instance.
NOTE:	If F1-C signalling transport is shared among several F1-C interface instances, this message may transfer updated information associated to several F1-C interface instances.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cells to be Activated List

0.. 1

List of cells to be activated
YES
reject
>Cells to be Activated List Item

1.. <maxCellingNBDU>


EACH
reject
>> NR CGI
M

9.3.1.12

-

>> NR PCI 
O

INTEGER (0..1007)
Physical Cell ID
-

>> gNB-CU System Information
O

9.3.1.42
RRC container with system information owned by gNB-CU
YES
reject
>>Available PLMN List
O

9.3.1.65

YES
ignore
>>Extended Available PLMN List
O

9.3.1.76
This is included if Available PLMN List IE is included and if more than 6 Available PLMNs is to be signalled.
YES
ignore
>>IAB Info IAB-donor-CU
O

9.3.1.105
IAB-related configuration sent by the IAB-donor-CU.
YES
ignore
>>Available SNPN ID List
O

9.3.1.163
Indicates the available SNPN ID list.
If this IE is included, the content of the Available PLMN List IE and Extended Available PLMN List IE if present in the Cells to be Activated List Item IE is ignored.
YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore
Cells to be Deactivated List

0.. 1

List of cells to be deactivated
YES
reject
>Cells to be Deactivated List Item

1.. <maxCellingNBDU>


EACH
reject
>> NR CGI
M

9.3.1.12

-
-
Transport Layer Address Info
O

9.3.2.5

YES
ignore
Uplink BH Non-UP Traffic Mapping
O

9.3.1.103

YES
reject
BAP Address
O

9.3.1.111
Indicates a BAP address assigned to the IAB-donor-DU.
YES
ignore

Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.

9.2.1.9	GNB-DU CONFIGURATION UPDATE FAILURE
This message is sent by the gNB-CU to indicate gNB-DU Configuration Update failure.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Time to wait
O

9.3.1.13

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.10	GNB-CU CONFIGURATION UPDATE
This message is sent by the gNB-CU to transfer updated information associated to an F1-C interface instance.
NOTE:	If F1-C signalling transport is shared among several F1-C interface instances, this message may transfer updated information associated to several F1-C interface instances.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cells to be Activated List

0..1

List of cells to be activated or modified
YES
reject
>Cells to be Activated List Item

1.. <maxCellingNBDU>


EACH
reject
>> NR CGI
M

9.3.1.12

-

>> NR PCI 
O

INTEGER (0..1007)
Physical Cell ID
-

>> gNB-CU System Information
O

9.3.1.42
RRC container with system information owned by gNB-CU
YES
reject
>>Available PLMN List
O

9.3.1.65

YES
ignore
>>Extended Available PLMN List
O

9.3.1.76
This is included if Available PLMN List IE is included and if more than 6 Available PLMNs is to be signalled.
YES
ignore
>>IAB Info IAB-donor-CU
O

9.3.1.105
IAB-related configuration sent by the IAB-donor-CU.
YES
ignore
>>Available SNPN ID List
O

9.3.1.163
Indicates the available SNPN ID list.
If this IE is included, the content of the Available PLMN List IE and Extended Available PLMN List IE if present in the Cells to be Activated List Item IE is ignored.
YES
ignore
Cells to be Deactivated List

0..1

List of cells to be deactivated
YES
reject
>Cells to be Deactivated List Item

1.. <maxCellingNBDU>


EACH
reject
>> NR CGI
M

9.3.1.12

-

gNB-CU TNL Association To Add List 

0..1


YES
ignore
>gNB-CU TNL Association To Add Item IEs

1..<maxnoofTNLAssociations>


EACH
ignore
>>TNL Association Transport Layer Information
M

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-CU.
-

>>TNL Association Usage
M

ENUMERATED (ue, non-ue, both, ...)
Indicates whether the TNL association is only used for UE-associated signalling, or non-UE-associated signalling, or both. For usage of this IE, refer to TS 38.472 [22].
-

gNB-CU TNL Association To Remove List 

0..1


YES
ignore
>gNB-CU TNL Association To Remove Item IEs

1..<maxnoofTNLAssociation>


EACH
ignore
>>TNL Association Transport Layer Address
M

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-CU.
-

>>TNL Association Transport Layer Address gNB-DU
O

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-DU.
YES
reject
gNB-CU TNL Association To Update List 

0..1


YES
ignore
>gNB-CU TNL Association To Update Item IEs

1..<maxnoofTNLAssociations>


EACH
ignore
>>TNL Association Transport Layer Address
M

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-CU.
-

>>TNL Association Usage
O

ENUMERATED (ue, non-ue, both, ...)
Indicates whether the TNL association is only used for UE-associated signalling, or non-UE-associated signalling, or both. For usage of this IE, refer to TS 38.472 [22].
-

Cells to be barred List

0..1

List of cells to be barred.

YES
ignore
>Cells to be barred List Item

1.. <maxCellingNBDU>


EACH
ignore
>>NR CGI
M

9.3.1.12

-

>>Cell Barred
M

ENUMERATED (barred, not-barred, ...)

-

>>IAB Barred
O

ENUMERATED (barred, not-barred, ...)

-

Protected E-UTRA Resources List

0..1

List of Protected E-UTRA Resources.
YES
reject
>Protected E-UTRA Resources List Item

1.. <maxCellineNB>


EACH
reject
>>Spectrum Sharing Group ID
M

INTEGER (1.. maxCellineNB)
Indicates the E-UTRA cells involved in resource coordination with the NR cells affiliated with the same Spectrum Sharing Group ID.
-

>> E-UTRA Cells List

1

List of applicable E-UTRA cells. 
-

>>> E-UTRA Cells List Item

1 .. <maxCellineNB>


-

>>>>EUTRA Cell ID
M

BIT STRING (SIZE(28))
Indicates the E-UTRAN Cell Identifier IE contained in the ECGI as defined in subclause 9.2.14 in TS 36.423 [9].
-

>>>>Served E-UTRA  Cell Information
M

9.3.1.64

-

Neighbour Cell Information List

0..1


YES
ignore
>Neighbour Cell Information List Item

1 .. <maxCellingNBDU>


EACH
ignore
>>NR CGI
M

9.3.1.12

-

>>Intended TDD DL-UL Configuration
O

9.3.1.89

-

Transport Layer Address Info
O

9.3.2.5

YES
ignore
Uplink BH Non-UP Traffic Mapping
O

9.3.1.103

YES
reject
BAP Address
O

9.3.1.111
Indicates a BAP address assigned to the IAB-donor-DU.
YES
ignore
gNB-CU Name
O

PrintableString(SIZE(1..150,...))
Human readable name of the gNB-CU. 
YES
ignore
Extended gNB-CU Name
O

9.3.1.206

YES
ignore

Range bound
Explanation
maxCellingNBDU
Maximum numbers of cells that can be served by a gNB-DU. Value is 512.
maxnoofTNLAssociations
Maximum numbers of TNL Associations between the gNB-CU and the gNB-DU. Value is 32.
maxCellineNB
Maximum no. cells that can be served by an eNB. Value is 256.

9.2.1.11	GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE
This message is sent by a gNB-DU to a gNB-CU to acknowledge update of information associated to an F1-C interface instance.
NOTE:	If F1-C signalling transport is shared among several F1-C interface instance, this message may transfer updated information associated to several F1-C interface instances.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cells Failed to be Activated List

0..1

List of cells which are failed to be activated
YES
reject
>Cells Failed to be Activated Item

1.. <maxCellingNBDU>


EACH
reject
>> NR CGI
M

9.3.1.12

-

>>Cause
M

9.3.1.2

-

Criticality Diagnostics
O

9.3.1.3

YES
ignore
gNB-CU TNL Association Setup List 

0..1


YES
ignore
>gNB-CU TNL Association Setup Item IEs

1..<maxnoofTNLAssociations>


EACH
ignore
>>TNL Association Transport Layer Address
M

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-CU
-

gNB-CU TNL Association Failed to Setup List

0..1


YES
ignore
>gNB-CU TNL Association Failed To Setup Item IEs

1..<maxnoofTNLAssociations>


EACH
ignore
>>TNL Association Transport Layer Address
M

CP Transport Layer Address
9.3.2.4
Transport Layer Address of the gNB-CU
-

>>Cause
M

9.3.1.2

-

Dedicated SI Delivery Needed UE List

0..1

List of UEs unable to receive system information from broadcast
YES
ignore
>Dedicated SI Delivery Needed UE List

1 .. <maxnoofUEIDs>


EACH
ignore
>>gNB-CU UE F1AP ID
M

9.3.1.4

-
-
>>NR CGI
M

9.3.1.12

-
-
Transport Layer Address Info
O

9.3.2.5

YES
ignore

Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.
maxnoofTNLAssociations
Maximum no. of TNL Associations between the gNB-CU and the gNB-DU. Value is 32.
maxnoofUEIDs
Maximum no. of UEs that can be served by a gNB-DU. Value is 65536.

9.2.1.12	GNB-CU CONFIGURATION UPDATE FAILURE
This message is sent by the gNB-DU to indicate gNB-CU Configuration Update failure.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Time to wait
O

9.3.1.13

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.13	GNB-DU RESOURCE COORDINATION REQUEST
This message is sent by a gNB-CU to a gNB-DU, to express the desired resource allocation for data traffic, for the sake of resource coordination. The message triggers gNB-DU resource coordination (for NR-initiated resource coordination), to indicate an initial resource offer by the E-UTRA node (for E-UTRA-initiated gNB-DU Resource Coordination), or to indicate the agreed resource allocation that is to be executed.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Request type
M

ENUMERATED (offer, execution, ...)

YES
reject
E-UTRA – NR Cell Resource Coordination Request Container
M

OCTET STRING
Includes the X2AP E-UTRA – NR CELL RESOURCE COORDINATION REQUEST message as defined in subclause 9.1.4.24 in TS 36.423 [9].
YES
reject
Ignore Coordination Request Container
O

ENUMERATED (yes, ...)

YES
reject

9.2.1.14	GNB-DU RESOURCE COORDINATION RESPONSE
This message is sent by a gNB-DU to a gNB-CU, to express the desired resource allocation for data traffic, as a response to the GNB-DU RESOURCE COORDINATION REQUEST.
Direction: gNB-DU  gNB-CU

IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
E-UTRA – NR Cell Resource Coordination Response Container
M

OCTET STRING
Includes the X2AP E-UTRA – NR CELL RESOURCE COORDINATION RESPONSE message as defined in subclause 9.1.4.25 in TS 36.423 [9].
YES
reject

9.2.1.15	GNB-DU STATUS INDICATION
This message is sent by the gNB-DU to indicate to the gNB-CU its status of overload.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
gNB-DU Overload Information
M

ENUMERATED (overloaded, not-overloaded)

YES
reject

9.2.1.16	F1 REMOVAL REQUEST
This message is sent by either the gNB-DU or the gNB-CU to intiate the removal of the interface instance and the related resources.
Direction: gNB-DU  gNB-CU, gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject

9.2.1.17	F1 REMOVAL RESPONSE
This message is sent by either the gNB-DU or the gNB-CU to acknowledge the initiation of removal of the interface instance and the related resources.
Direction: gNB-CU  gNB-DU, gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.18	F1 REMOVAL FAILURE
This message is sent by either the gNB-DU or the gNB-CU to indicate that removing the interface instance and the related resources cannot be accepted.
Direction: gNB-CU  gNB-DU, gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.2.3.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause 
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.19	NETWORK ACCESS RATE REDUCTION	
This message is sent by the gNB-CU to indicate to the gNB-DU a need to reduce the rate at which UEs access the network.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
UAC Assistance Information
M

9.3.1.83

YES
reject

9.2.1.20	RESOURCE STATUS REQUEST
This message is sent by gNB-CU to gNB-DU to initiate the requested measurement according to the parameters given in the message.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
gNB-CU Measurement ID
M

INTEGER (1..4095,...)
Allocated by gNB-CU
YES
reject
gNB-DU Measurement ID
C-ifRegistrationRequestStoporAdd

INTEGER (1..4095,...)
Allocated by gNB-DU
YES
ignore
Registration Request
M

ENUMERATED(start, stop,
add, …)
Type of request for which the resource status is required.
YES
ignore
Report Characteristics
C-ifRegistrationRequestStart

BIT STRING
(SIZE(32))
Each position in the bitmap indicates measurement object the gNB-DU is requested to report.
First Bit = PRB Periodic,
Second Bit = TNL Capacity Ind Periodic,
Third Bit = 
Composite Available Capacity Periodic, Fourth Bit = HW LoadInd Periodic, Fifth Bit = Number of Active UEs 
Other bits shall be ignored by the gNB-DU.
YES
ignore
Cell To Report List

0..1

Cell ID list to which the request applies.
YES
ignore
>Cell To Report Item

1 .. <maxCellingNBDU>




>>Cell ID
M

NR CGI
9.3.1.12

-

>>SSB To Report List

0..1

SSB list to which the request applies.
-

>>>SSB To Report Item

1 .. < maxnoofSSBAreas>


-

>>>>SSB index
M

INTEGER (0..63)



>>Slice To Report List 

0..1

S-NSSAI list to which the request applies. 
-

>>>Slice To Report Item

1..< maxnoofBPLMNsNR>




>>>>PLMN Identity
M

9.3.1.14
Broadcast PLMN


>>>>S-NSSAI List 

1


-

>>>>>S-NSSAI Item 

1 .. < maxnoofSliceItems>


-

>>>>>>S-NSSAI
M

9.3.1.38

-

Reporting Periodicity
O

ENUMERATED(500ms, 1000ms, 2000ms, 5000ms,10000ms, …)
Periodicity that can be used for reporting of PRB Periodic, TNL Capacity Ind Periodic, Composite Available Capacity Periodic. Also used as the averaging window length for all measurement object if supported.
YES
ignore

Condition
Explanation
ifRegistrationRequestStoporAdd
This IE shall be present if the Registration Request IE is set to the value "stop" or "add".
ifRegistrationRequestStart
This IE shall be present if the Registration Request IE is set to the value "start".

Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.
maxnoofSSBAreas
Maximum no. SSB Areas that can be served by a NG-RAN node cell. Value is 64.
maxnoofSliceItems 
Maximum no. of signalled slice support items. Value is 1024. 
maxnoofBPLMNsNR
Maximum no. of PLMN Ids.broadcast in a cell. Value is 12.

9.2.1.21	RESOURCE STATUS RESPONSE
This message is sent by gNB-DU to gNB-CU to indicate that the requested measurement is successfully initiated.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
gNB-CU Measurement ID
M

INTEGER (1..4095,...)
Allocated by gNB-CU
YES
reject
gNB-DU Measurement ID
M

INTEGER (1..4095,...)
Allocated by gNB-DU
YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.22	RESOURCE STATUS FAILURE
This message is sent by gNB-DU to gNB-CU to indicate that for any of the requested measurement objects the measurement cannot be initiated.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
gNB-CU Measurement ID
M

INTEGER (1..4095,...)
Allocated by gNB-CU
YES
reject
gNB-DU Measurement ID
M

INTEGER (1..4095,...)
Allocated by gNB-DU
YES
ignore
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.1.23	RESOURCE STATUS UPDATE
This message is sent by gNB-DU to gNB-CU to report the results of the requested measurements.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
gNB-CU Measurement ID
M

INTEGER (1..4095,...)
Allocated by gNB-CU
YES
reject
gNB-DU Measurement ID
M

INTEGER (1..4095,...)
Allocated by gNB-DU
YES
ignore
Hardware Load Indicator 
O

9.3.1.136

YES
ignore
TNL Capacity Indicator
O

9.3.1.128

YES
ignore
Cell Measurement Result

0..1


YES
ignore
>Cell Measurement Result Item

1 .. <maxCellingNBDU >


-

>>Cell ID
M

NR CGI
9.3.1.12

-

>>Radio Resource Status 
O

9.3.1.129

-

>>Composite Available Capacity Group
O

9.3.1.130

-

>>Slice Available Capacity 
O

9.3.1.134

-

>>Number of Active UEs 
O

 9.3.1.135

-


Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.

9.2.2	UE Context Management messages
9.2.2.1	UE CONTEXT SETUP REQUEST
This message is sent by the gNB-CU to request the setup of a UE context.
Direction: gNB-CU  gNB-DU. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
O

9.3.1.5

YES
ignore
SpCell ID
M

NR CGI
9.3.1.12
Special Cell as defined in TS 38.321 [16]. For handover case, this IE is considered as target cell.
YES
reject
ServCellIndex
M

INTEGER (0..31,...)

YES
reject
SpCell UL Configured
O

Cell UL Configured
9.3.1.33

YES
ignore
CU to DU RRC Information
M

9.3.1.25

YES
reject
Candidate SpCell List

0..1


YES
ignore
>Candidate SpCell Item IEs

1 .. <maxnoofCandidateSpCells>


EACH
ignore
>>Candidate SpCell ID
M

NR CGI
9.3.1.12
Special Cell as defined in TS 38.321 [16]
-

DRX Cycle 
O

DRX Cycle 
9.3.1.24

YES
ignore
Resource Coordination Transfer Container
O

OCTET STRING
Includes the MeNB Resource Coordination Information IE as defined in subclause 9.2.116 of TS 36.423 [9] for EN-DC case or MR-DC Resource Coordination Information IE as defined in TS 38.423 [28] for NGEN-DC and NE-DC cases.
YES
ignore
SCell To Be Setup List

0..1


YES
ignore
>SCell to Be Setup Item IEs

1.. <maxnoofSCells>


EACH
ignore
>>SCell ID
M

NR CGI
9.3.1.12
SCell Identifier in gNB
-

>>SCellIndex
M

INTEGER (1..31)

-

>>SCell UL Configured
O

Cell UL Configured
9.3.1.33

-

>>servingCellMO
O

INTEGER (1..64)

YES
ignore
SRB to Be Setup List

0..1


YES
reject
>SRB to Be Setup Item IEs

1 .. <maxnoofSRBs>


EACH
reject
>>SRB ID
M

9.3.1.7

-

>>Duplication Indication
O

ENUMERATED (true, ..., false)
If included, it should be set to true. 
This IE is ignored if the Additional Duplication Indication IE is present.
-

>>Additional Duplication Indication
O

ENUMERATED (three, four, …)

YES
ignore
DRB to Be Setup List

0..1


YES
reject
>DRB to Be Setup Item IEs

1 .. <maxnoofDRBs> 


EACH
reject
>>DRB ID
M

9.3.1.8

-

>>CHOICE QoS Information
M



-

>>>E-UTRAN QoS
M

9.3.1.19
Shall be used for EN-DC case to convey E-RAB Level QoS Parameters
-

>>>DRB Information

1

Shall be used for NG-RAN cases
YES
ignore
>>>>DRB QoS
M

9.3.1.45

-

>>>>S-NSSAI
M

9.3.1.38

-

>>>>Notification Control
O

9.3.1.56

-

>>>>Flows Mapped to DRB Item

1 .. <maxnoofQoSFlows>


-

>>>>>QoS Flow Identifier
M

9.3.1.63

-

>>>>>QoS Flow Level QoS Parameters
M

9.3.1.45

-

>>>>>QoS Flow Mapping Indication
O

9.3.1.72

YES
ignore
>>>>>TSC Traffic Characteristics
O

9.3.1.141
Traffic pattern information associated with the QFI. Details in TS 23.501 [21].
YES
ignore
>>UL UP TNL Information to be setup List

1


-

>>>UL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofULUPTNLInformation>


-

>>>>UL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
>>RLC Mode
M

9.3.1.27

-

>>UL Configuration
O

UL Configuraiton  
9.3.1.31
Information about UL usage in gNB-DU. 
-

>>Duplication Activation
O

9.3.1.36
Information on the initial state of CA based UL PDCP duplication.
This IE is ignored if the RLC Duplication Information IE is present.
-

>>DC Based Duplication Configured
O

ENUMERATED (true, ..., false)
Indication on whether DC based PDCP duplication is configured or not. If included, it should be set to true.
YES
reject
>>DC Based Duplication Activation
O

Duplication Activation
9.3.1.36
Information on the initial state of  DC basedUL PDCP duplication.
This IE is ignored if the RLC Duplication Information IE is present.
YES
reject
>>DL PDCP SN length
M

ENUMERATED (12bits, 18bits, ...)

YES
ignore
>>UL PDCP SN length
O

ENUMERATED (12bits, 18bits, ...)

YES
ignore
>>Additional PDCP Duplication TNL List

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. <maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
>>RLC Duplication Information
O

9.3.1.146

YES
ignore
Inactivity Monitoring Request 
O

ENUMERATED (true, ...)

YES
reject
RAT-Frequency Priority Information
O

9.3.1.34

YES
reject
RRC-Container
O

9.3.1.6
Includes the DL-DCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8], encapsulated in a PDCP PDU.
YES
ignore
Masked IMEISV
O

9.3.1.55

YES
ignore
Serving PLMN
O

PLMN ID
9.3.1.14
Indicates the PLMN serving the UE.
YES
ignore
gNB-DU UE Aggregate Maximum Bit Rate Uplink
C-ifDRBSetup

Bit Rate 9.3.1.22
The gNB-DU UE Aggregate Maximum Bit Rate Uplink is to be enforced by the gNB-DU.
YES
ignore
RRC Delivery Status Request
O

ENUMERATED (true, …)
Indicates whether RRC DELIVERY REPORT procedure is requested for the RRC message.
YES
ignore
Resource Coordination Transfer Information
O

9.3.1.73

YES
ignore
servingCellMO
O

INTEGER (1..64, ...)

YES
ignore
New gNB-CU UE F1AP ID
O

gNB-CU UE F1AP ID
9.3.1.4

YES
reject
RAN UE ID
O

OCTET STRING (SIZE (8))

YES
ignore
Trace Activation
O

9.3.1.88

YES
ignore
Additional RRM Policy Index
O

9.3.1.90

YES
ignore
BH RLC Channel to be Setup List

0..1


YES
reject
>BH RLC Channel to be Setup Item IEs

1 .. <maxnoofBHRLCChannels> 


EACH
reject
>>BH RLC CH ID
M

9.3.1.113

-

>>CHOICE BH QoS Information
M





>>>BH RLC CH QoS
M

QoS Flow Level QoS Parameters
9.3.1.45
Shall be used for SA case.


>>>E-UTRAN BH RLC CH QoS
M

E-UTRAN QoS
9.3.1.19
Shall be used for EN-DC case.


>>>Control Plane Traffic Type
M

9.3.1.115



>>RLC Mode
M

9.3.1.27

-

>>BAP Control PDU Channel
O

ENUMERATED (true, …)

-

>>Traffic Mapping Information
O

9.3.1.95

-

Configured BAP Address
O

9.3.1.111
The BAP address configured for the corresponding child IAB-node.
YES
reject
NR V2X Services Authorized
O

9.3.1.116

YES
ignore
LTE V2X Services Authorized
O

9.3.1.117

YES
ignore
NR UE Sidelink Aggregate Maximum Bit Rate
O

9.3.1.119
This IE applies only if the UE is authorized for NR V2X services.
YES
ignore
LTE UE Sidelink Aggregate Maximum Bit Rate
O

9.3.1.118
This IE applies only if the UE is authorized for LTE V2X services.
YES
ignore
PC5 Link Aggregate Bit Rate
O

Bit Rate
9.3.1.22
Only applies for non-GBR and unicast QoS Flows.
YES
ignore
SL DRB to Be Setup List

0..1


YES
reject
>SL DRB to Be Setup Item IEs

1 .. <maxnoofSLDRBs> 


EACH
reject
>>SL DRB ID
M

9.3.1.120

-

>>SL DRB Information

1


YES
ignore
>>>SL DRB QoS
M

PC5 QoS Parameters
9.3.1.122

-

>>>Flows Mapped to SL DRB Item

1 .. <maxnoofPC5QoSFlows>


-

>>>>PC5 QoS Flow Identifier


9.3.1.121

-

>>RLC mode
M

9.3.1.27

-

Conditional Inter-DU Mobility Information
O



YES
reject
>CHO Trigger
M

ENUMERATED (CHO-initiation, CHO-replace, …)

-
-
>Target gNB-DU UE F1AP ID
C-ifCHOmod

9.3.1.5
Allocated at the target gNB-DU
-
-
>Estimated Arrival Probability
O

INTEGER (1..100)

YES
ignore
Management Based MDT PLMN List
O 

MDT PLMN List
9.3.1.151

YES
ignore
Serving NID
O

9.3.1.155

YES
reject
F1-C Transfer Path
O

9.3.1.207

YES
reject

Range bound
Explanation
maxnoofSCells
Maximum no. of SCells allowed towards one UE, the maximum value is 32.
maxnoofSRBs
Maximum no. of SRB allowed towards one UE, the maximum value is 8. 
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 
maxnoofULUPTNLInformation
Maximum no. of ULUP TNL Information allowed towards one DRB, the maximum value is 2.
maxnoofCandidateSpCells
Maximum no. of SpCells allowed towards one UE, the maximum value is 64.
maxnoofQoSFlows
Maximum no. of flows allowed to be mapped to one DRB, the maximum value is 64.
maxnoofBHRLCChannels
Maximum no. of BH RLC channels allowed towards one IAB-node, the maximum value is 65536.
maxnoofSLDRBs
Maximum no. of SL DRB allowed for NR sidelink communication per UE, the maximum value is 512.
maxnoofPC5QoSFlows
Maximum no. of PC5 QoS flow allowed towards one UE for NR sidelink communication, the maximum value is 2048.
maxnoofAdditionalPDCPDuplicationTNL
Maximum no. of additional UP TNL Information allowed towards one DRB, the maximum value is 2. 

Condition
Explanation
ifDRBSetup
This IE shall be present only if the DRB to Be Setup List IE is present.
ifCHOmod
This IE shall be present if the CHO Trigger IE is present and set to "CHO-replace".

9.2.2.2	UE CONTEXT SETUP RESPONSE
This message is sent by the gNB-DU to confirm the setup of a UE context.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
DU To CU RRC Information
M

9.3.1.26

YES
reject
C-RNTI
O

9.3.1.32
C-RNTI allocated at the gNB-DU
YES
ignore
Resource Coordination Transfer Container
O

OCTET STRING
Includes the SgNB Resource Coordination Information IE as defined in subclause 9.2.117 of TS 36.423 [9] for EN-DC case or MR-DC Resource Coordination Information IE as defined in TS 38.423 [28] for NGEN-DC and NE-DC cases.
YES
ignore
Full Configuration
O

ENUMERATED (full, ...)

YES
reject
DRB Setup List

0..1

The List of DRBs which are successfully established.
YES
ignore
>DRB Setup Item Iist

1 .. <maxnoofDRBs>


EACH
ignore
>>DRB ID
M

9.3.1.8

-

>>LCID
O

9.3.1.35
LCID for the primary path or for the split secondary path for fallback to split bearer if PDCP duplication is applied.
-

>>DL UP TNL Information to be setup List

1


-

>>> DL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofDLUPTNLInformation>


-

>>>>DL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

>>Additional PDCP Duplication TNL List

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. <maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

>>Current QoS Parameters Set Index
O

Alternative QoS Parameters Set Index
9.3.1.123
Index to the currently fulfilled alternative QoS parameters set. 
YES
ignore
SRB Failed to Setup List

0..1


YES
ignore
>SRB Failed to Setup Item 

1 .. <maxnoofSRBs>


EACH
ignore
>>SRB ID
M

9.3.1.7

-

>>Cause
O

9.3.1.2

-

DRB Failed to Setup List

0..1


YES
ignore
>DRB Failed to Setup Item 

1 .. <maxnoofDRBs>


EACH
ignore
>>DRB ID
M

9.3.1.8

-

>>Cause
O

9.3.1.2

-

SCell Failed To Setup List

0..1


YES
ignore
>SCell Failed to Setup Item

1 .. <maxnoofSCells>


EACH
ignore
>>SCell ID
M

NR CGI
9.3.1.12
SCell Identifier in gNB
-

>>Cause
O

9.3.1.2

-

Inactivity Monitoring Response
O

ENUMERATED (not-supported, ...)

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore
SRB Setup List

0..1


YES
ignore
>SRB Setup Item

1 .. <maxnoofSRBs>


EACH
ignore
>>SRB ID
M

9.3.1.7

-

>>LCID
M

9.3.1.35
LCID for the primary path if PDCP duplication is applied
-

BH RLC Channel Setup List

0..1

The list of BH RLC channels which are successfully established.
YES
ignore
>BH RLC Channel Setup Item

1 .. <maxnoofBHRLCChannels>


EACH
ignore
>>BH RLC CH ID
M

9.3.1.113

-

BH RLC Channel Failed to be Setup List

0..1

The list of BH RLC channels whose setup has failed.
YES
ignore
>BH RLC Channel Failed to be Setup Item 

1 .. <maxnoofBHRLCChannels>


EACH
ignore
>>BH RLC CH ID
M

9.3.1.113

-

>>Cause
O

9.3.1.2

-

SL DRB Setup List

0..1

The List of SL DRBs which are successfully established.
YES
ignore
>SL DRB Setup Item IEs

1 .. <maxnoofSLDRBs>


EACH
ignore
>>SL DRB ID
M

9.3.1.120

-

SL DRB Failed To Setup List

0..1


EACH
ignore
>SL DRB Failed To Setup Item IE

1 .. <maxnoofSLDRBs>


EACH
ignore
>>SL DRB ID
M

9.3.1.120

-

>>Cause
O

9.3.1.2

-

Requested Target Cell ID
O

NR CGI
9.3.1.12
Special Cell indicated in the UE CONTEXT SETUP REQUEST message.
YES
reject

Range bound
Explanation
maxnoofSCells
Maximum no. of SCells allowed towards one UE, the maximum value is 32.
maxnoofSRBs
Maximum no. of SRB allowed towards one UE, the maximum value is 8. 
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 
maxnoofDLUPTNLInformation
Maximum no. of DL UP TNL Information allowed towards one DRB, the maximum value is 2.
maxnoofBHRLCChannels
Maximum no. of BH RLC channels allowed towards one IAB-node, the maximum value is 65536.
maxnoofSLDRBs
Maximum no. of SL DRB allowed for NR sidelink communication per UE, the maximum value is 512.
maxnoofAdditionalPDCPDuplicationTNL
Maximum no. of additional UP TNL Information allowed towards one DRB, the maximum value is 2. 

9.2.2.3	UE CONTEXT SETUP FAILURE
This message is sent by the gNB-DU to indicate that the setup of the UE context was unsuccessful.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
O

9.3.1.5

YES
ignore
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore
Potential SpCell List

0..1


YES
ignore
>Potential SpCell Item IEs

0 .. <maxnoofPotentialSpCells>


EACH
ignore
>>Potential SpCell ID
M

NR CGI
9.3.1.12
Special Cell as defined in TS 38.321 [16]
-

Requested Target Cell ID
O

NR CGI
9.3.1.12
Special Cell indicated in the UE CONTEXT SETUP REQUEST message.
YES
reject

Range bound
Explanation
maxnoofPotentialSpCells
Maximum no. of SpCells allowed towards one UE, the maximum value is 64.

9.2.2.4	UE CONTEXT RELEASE REQUEST
This message is sent by the gNB-DU to request the gNB-CU to release the UE-associated logical F1 connection or candidate cells in conditional handover or conditional PSCell change.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Cause
M

9.3.1.2

YES
ignore
Candidate Cells To Be Cancelled List

0 .. <maxnoofCellsinCHO>


YES
reject
>Target Cell ID
M

NR CGI
9.3.1.12

-
-

Range bound
Explanation
maxnoofCellsinCHO
Maximum no. cells that can be prepared for a conditional mobility. Value is 8.

9.2.2.5	UE CONTEXT RELEASE COMMAND
This message is sent by the gNB-CU to request the gNB-DU to release the UE-associated logical F1 connection or candidate cells in conditional handover or conditional PSCell change.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Cause
M

9.3.1.2

YES
ignore
RRC-Container
O

9.3.1.6
Includes the DL-DCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8] encapsulated in a PDCP PDU, or the DL-CCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8].
YES
ignore
SRB ID
C- ifRRCContainer

9.3.1.7
The gNB-DU sends the RRC message on the indicated SRB.
YES
ignore
old gNB-DU UE F1AP ID
O

9.3.1.5
Include it if RRCReestablishmentRequest is not accepted
YES
ignore
Execute Duplication
O

ENUMERATED (true, ...)
This IE may be sent only if duplication has been configured for the UE. 
YES
ignore
RRC Delivery Status Request
O

ENUMERATED (true, …)
Indicates whether RRC DELIVERY REPORT procedure is requested for the RRC message.
YES
ignore
Candidate Cells To Be Cancelled List

0 .. <maxnoofCellsinCHO>


YES
reject
>Target Cell ID
M

NR CGI
9.3.1.12

-
-

Range bound
Explanation
maxnoofCellsinCHO
Maximum no. cells that can be prepared for a conditional mobility. Value is 8.

Condition
Explanation
ifRRCContainer
This IE shall be present if the RRC container IE is present.

9.2.2.6	UE CONTEXT RELEASE COMPLETE
This message is sent by the gNB-DU to confirm the release of the UE-associated logical F1 connection or candidate cells in conditional handover or conditional PSCell change.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.2.7	UE CONTEXT MODIFICATION REQUEST
This message is sent by the gNB-CU to provide UE Context information changes to the gNB-DU.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
SpCell ID
O

NR CGI
9.3.1.12
Special Cell as defined in TS 38.321 [16]. For handover case, this IE is considered as target cell.
YES
ignore
ServCellIndex
O

INTEGER (0..31, ...)

YES
reject
SpCell UL Configured
O

Cell UL Configured
9.3.1.33

YES
ignore
DRX Cycle 
O

DRX Cycle 
9.3.1.24

YES
ignore
CU to DU RRC Information

O


9.3.1.25

YES
reject
Transmission Action Indicator
O

9.3.1.11

YES
ignore
Resource Coordination Transfer Container
O

OCTET STRING
Includes the MeNB Resource Coordination Information IE as defined in subclause 9.2.116 of TS 36.423 [9] for EN-DC case or MR-DC Resource Coordination Information IE as defined in TS 38.423 [28] for NGEN-DC and NE-DC cases.
YES
ignore
RRC Reconfiguration Complete Indicator
O

9.3.1.30

YES
ignore
RRC-Container
O

9.3.1.6
Includes the DL-DCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8], encapsulated in a PDCP PDU.
YES
reject
SCell To Be Setup List

0..1


YES
ignore
>SCell to Be Setup Item IEs

1.. <maxnoofSCells>


EACH
ignore
>>SCell ID
M

NR CGI
9.3.1.12
SCell Identifier in gNB
-

>>SCellIndex
M

INTEGER (1..31)

-

>>SCell UL Configured
O

Cell UL Configured
9.3.1.33

-

>>servingCellMO
O

INTEGER (1..64)

YES
ignore
SCell To Be Removed List

0..1


YES
ignore
>SCell to Be Removed Item IEs

1 .. <maxnoofSCells>


EACH
ignore
>>SCell ID
M

NR CGI
9.3.1.12
SCell Identifier in gNB
-

SRB to Be Setup List

0..1


YES
reject
>SRB to Be Setup Item IEs

1..<maxnoofSRBs>


EACH
reject
>>SRB ID
M

9.3.1.7

-

>>Duplication Indication
O

ENUMERATED (true, ..., false)
This IE is ignored if the Additional Duplication Indication IE is present.
-

>>Additional Duplication Indication
O

ENUMERATED (three, four, …)

YES
ignore
DRB to Be Setup List

0..1


YES
reject
>DRB to Be Setup Item IEs

1 .. <maxnoofDRBs>


EACH
reject
>>DRB ID
M

9.3.1.8

-

>>CHOICE QoS Information
M



-

>>>E-UTRAN QoS
M

9.3.1.19
Shall be used for EN-DC case to convey E-RAB Level QoS Parameters


>>>DRB Information

1

Shall be used for NG-RAN cases
YES
ignore
>>>>DRB QoS
M

9.3.1.45

-

>>>>S-NSSAI
M

9.3.1.38

-

>>>>Notification Control
O

9.3.1.56

-

>>>>Flows Mapped to DRB Item

1 .. <maxnoofQoSFlows>


-

>>>>>QoS Flow Identifier
M

9.3.1.63

-

>>>>>QoS Flow Level QoS Parameters
M

9.3.1.45

-

>>>>>QoS Flow Mapping Indication
O

9.3.1.72

YES
ignore
>>>>>TSC Traffic Characteristics
O

9.3.1.141
Traffic pattern information associated with the QFI. Details in TS 23.501 [21].
YES
ignore
>>UL UP TNL Information to be setup List 

1


-

>>>UL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofULUPTNLInformation>


-

>>>>UL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
>>RLC Mode
M

9.3.1.27

-

>>UL Configuration
O

UL Configuration 
9.3.1.31
Information about UL usage in gNB-DU. 
-

>>Duplication Activation
O

9.3.1.36
Information on the initial state of CA based UL PDCP duplication.
This IE is ignored if the RLC Duplication Information IE is present.
-

>>DC Based Duplication Configured
O

ENUMERATED (true, ..., false)
Indication on whether DC based PDCP duplication is configured or not. If included, it should be set to true.
YES
reject
>>DC Based Duplication Activation
O

Duplication Activation
9.3.1.36
Information on the initial state of  DC based UL PDCP duplication.
This IE is ignored if the RLC Duplication Information IE is present. 
YES
reject
>>DL PDCP SN length
O

ENUMERATED (12bits, 18bits, ...)

YES
ignore
>>UL PDCP SN length
O

ENUMERATED (12bits, 18bits, ...)

YES
ignore
>>Additional PDCP Duplication TNL List 

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. < maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
>>RLC Duplication Information
O

9.3.1.146

YES
ignore
DRB to Be Modified List

0..1


YES
reject
>DRB to Be Modified Item IEs

1 .. <maxnoofDRBs>


EACH
reject
>>DRB ID
M

9.3.1.8

-

>>CHOICE QoS Information
O



-

>>>E-UTRAN QoS
M

9.3.1.19
Used for EN-DC case to convey E-RAB Level QoS Parameters
-

>>>DRB Information

1

Used for NG-RAN cases
YES
ignore
>>>>DRB QoS
M

9.3.1.45

-

>>>>S-NSSAI
M

9.3.1.38

-

>>>>Notification Control
O

9.3.1.56

-

>>>>Flows Mapped to DRB Item

1 .. <maxnoofQoSFlows>


-

>>>>>QoS Flow Identifier
M

9.3.1.63

-

>>>>>QoS Flow Level QoS Parameters
M

9.3.1.45

-

>>>>>QoS Flow Mapping Indication
O

9.3.1.72

YES
ignore
>>>>>TSC Traffic Characteristics
O

9.3.1.141
Traffic pattern information associated with the QFI. Details in TS 23.501 [21].
YES
ignore
>>UL UP TNL Information to be setup List 

1


-

>>>UL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofULUPTNLInformation>


-

>>>>UL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
>>UL Configuration
O

UL Configuration 
9.3.1.31
Information about UL usage in gNB-DU. 
-

>>DL PDCP SN length
O

ENUMERATED(12bits,18bits , ...)

YES
ignore
>>UL PDCP SN length
O

ENUMERATED (12bits, 18bits, ...)

YES
ignore
>>Bearer Type Change
O

ENUMERATED (true, …)

YES
ignore
>>RLC Mode
O

9.3.1.27

YES
ignore
>>Duplication Activation
O

9.3.1.36
Information on the initial state of CA based UL PDCP duplication.
This IE is ignored if the RLC Duplication Information IE is present.
YES
reject
>>DC Based Duplication Configured
O

ENUMERATED (true, …, false)
Indication on whether DC based PDCP duplication is configured or not.
YES
reject
>>DC Based Duplication Activation
O

9.3.1.36
Information on the initial state of  DC based UL PDCP duplication.
This IE is ignored if the RLC Duplication Information IE is present. 
YES
reject
>>Additional PDCP Duplication TNL List 

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. <maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
>>RLC Duplication Information
O

9.3.1.146

YES
ignore
>>Transmission Stop Indicator
O

9.3.1.209

YES
ignore
SRB To Be Released List

0..1


YES
reject
>SRB To Be Released Item IEs

1.. <maxnoofSRBs>


EACH
reject
>>SRB ID
M

9.3.1.7



DRB to Be Released List

0..1


YES
reject
>DRB to Be Released Item IEs

1 .. <maxnoofDRBs>


EACH
reject
>>DRB ID
M

9.3.1.8

-

Inactivity Monitoring Request
O

ENUMERATED (true, ...)

YES
reject
RAT-Frequency Priority Information
O

9.3.1.34

YES
reject
DRX configuration indicator
O

ENUMERATED(release,...)

YES
ignore
RLC Failure Indication
O

9.3.1.66

YES
ignore
Uplink TxDirectCurrentList Information
O

9.3.1.67

YES
ignore
GNB-DU Configuration Query
O

ENUMERATED (true, ...)
Used to request the gNB-DU to provide its configuration.
YES
reject
gNB-DU UE Aggregate Maximum Bit Rate Uplink
O

Bit Rate 9.3.1.22
The gNB-DU UE Aggregate Maximum Bit Rate Uplink is to be enforced by the gNB-DU.
YES
ignore
Execute Duplication
O

ENUMERATED (true, ...)
This IE may be sent only if duplication has been configured for the UE.
YES
ignore
RRC Delivery Status Request
O

ENUMERATED (true, …)
Indicates whether RRC DELIVERY REPORT procedure is requested for the RRC message.
YES
ignore
Resource Coordination Transfer Information
O

9.3.1.73

YES
ignore
servingCellMO
O

INTEGER (1..64, ...)

YES
ignore
Need for Gap
O

ENUMERATED (true, …)
Indicate gap for SeNB configured measurement is requested.It only applied to NE DC scenario.
Yes
ignore
Full Configuration
O

ENUMERATED (full, ...)

YES
reject
Additional RRM Policy Index
O

9.3.1.90

YES
ignore
Lower Layer Presence Status Change
O

9.3.1.94

Yes
ignore
BH RLC Channel to be Setup List

0..1


YES
reject
>BH RLC Channel to be Setup Item IEs

1 .. <maxnoofBHRLCChannels> 


EACH
reject
>>BH RLC CH ID
M

9.3.1.113

-

>>CHOICE BH QoS information
M





>>>BH RLC CH QoS
M

QoS Flow Level QoS Parameters
9.3.1.45
Shall be used for SA case.


>>>E-UTRAN BH RLC CH QoS
M

E-UTRAN QoS
9.3.1.19
Shall be used for EN-DC case.


>>>Control Plane Traffic Type
M

9.3.1.115



>>RLC Mode
M

9.3.1.27

-

>>BAP Control PDU Channel
O

ENUMERATED (true, …)

-

>>Traffic Mapping Information
O

9.3.1.95

-

BH RLC Channel to be Modified List

0..1


YES
reject
>BH RLC Channel to be Modified Item IEs

1 .. <maxnoofBHRLCChannels> 


EACH
reject
>>BH RLC CH ID
M

9.3.1.113

-

>>CHOICE BH QoS information
O





>>>BH RLC CH QoS
M

QoS Flow Level QoS Parameters
9.3.1.45
Shall be used for SA case.


>>>E-UTRAN BH RLC CH QoS
M

E-UTRAN QoS
9.3.1.19
Shall be used for EN-DC case.


>>>Control Plane Traffic Type
M

9.3.1.115



>>RLC Mode
O

9.3.1.27

-

>>BAP Control PDU Channel
O

ENUMERATED (true, …)

-

>>Traffic Mapping Information
O

9.3.1.95

-

BH RLC Channel to be Released List

0..1


YES
reject
>BH RLC Channel to be Released Item IEs

1 .. <maxnoofBHRLCChannels >


EACH
reject
>>BH RLC CH ID
M

9.3.1.113

-

NR V2X Services Authorized
O

9.3.1.116

YES
ignore
LTE V2X Services Authorized
O

9.3.1.117

YES
ignore
NR UE Sidelink Aggregate Maximum Bit Rate
O

9.3.1.119
This IE applies only if the UE is authorized for NR V2X services.
YES
ignore
LTE UE Sidelink Aggregate Maximum Bit Rate
O

9.3.1.118
This IE applies only if the UE is authorized for LTE V2X services.
YES
ignore
PC5 Link Aggregate Bit Rate
O

Bit Rate
9.3.1.22
Only applies for non-GBR and unicast QoS Flows.
YES
ignore
SL DRB to Be Setup List

0..1


YES
reject
>SL DRB to Be Setup Item IEs

1 .. <maxnoofSLDRBs> 


EACH
reject
>>SL DRB ID
M

9.3.1.120

-

>>SL DRB Information

1


YES
ignore
>>>SL DRB QoS
M

PC5 QoS Parameters
9.3.1.122

-

>>>Flows Mapped to SL DRB Item

1 .. <maxnoofPC5QoSFlows>


-

>>>>PC5 QoS Flow Identifier
M

9.3.1.121

-

>>RLC mode
O

9.3.1.27

-

SL DRB to Be Modified List

0..1


YES
reject
>SL DRB to Be Modified Item IEs

1 .. <maxnoofSLDRBs> 


EACH
reject
>>SL DRB ID
M

9.3.1.120

-

>>SL DRB Information

1


YES
ignore
>>>SL DRB QoS
M

PC5 QoS Parameters
9.3.1.122

-

>>>Flows Mapped to SL DRB Item

1 .. <maxnoofPC5QoSFlows>


-

>>>>PC5 QoS Flow Identifier
M

9.3.1.121

-

>>RLC mode
O 

9.3.1.27

-

SL DRB to Be Released List

0..1


YES
reject
>SL DRB to Be Released Item IEs

1 .. <maxnoofSLDRBs> 


EACH
reject
>>SL DRB ID
M

9.3.1.120

-

Conditional Intra-DU Mobility Information
O



YES
reject
>CHO Trigger
M

ENUMERATED (CHO-initiation, CHO-replace, CHO-cancel, …)

-
-
>Candidate Cells To Be Cancelled List
C-ifCHOcancel
0 .. <maxnoofCellsinCHO>


-
-
>>Target Cell ID
M

NR CGI
9.3.1.12

-
-
>Estimated Arrival Probability
O

INTEGER (1..100)

YES
ignore
F1-C Transfer Path
O

9.3.1.207

YES
reject
SCG Indicator
O

ENUMERATED(released,...)
This IE is used at the MN in NR-DC and NE-DC and it indicates the release of an SCG
YES
ignore

Range bound
Explanation
maxnoofSCells
Maximum no. of SCells allowed towards one UE, the maximum value is 32.
maxnoofSRBs
Maximum no. of SRB allowed towards one UE, the maximum value is 8. 
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 
maxnoofULUPTNLInformation
Maximum no. of UL UP TNL Information allowed towards one DRB, the maximum value is 2.
maxnoofQoSFlows
Maximum no. of flows allowed to be mapped to one DRB, the maximum value is 64.
maxnoofBHRLCChannels
Maximum no. of BH RLC channels allowed towards one IAB-node, the maximum value is 65536.
maxnoofSLDRBs
Maximum no. of SL DRB allowed for NR sidelink communication per UE, the maximum value is 512.
maxnoofPC5QoSFlows
Maximum no. of PC5 QoS flow allowed towards one UE for NR sidelink communication, the maximum value is 2048.
maxnoofAdditionalPDCPDuplicationTNL
Maximum no. of additional UP TNL Information allowed towards one DRB, the maximum value is 2. 
maxnoofCellsinCHO
Maximum no. cells that can be prepared for a conditional mobility. Value is 8.

Condition
Explanation
ifCHOcancel
This IE may be present if the CHO Trigger IE is present and set to "CHO-cancel".

9.2.2.8	UE CONTEXT MODIFICATION RESPONSE
This message is sent by the gNB-DU to confirm the modification of a UE context.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Resource Coordination Transfer Container
O

OCTET STRING
Includes the SgNB Resource Coordination Information IE as defined in subclause 9.2.117 of TS 36.423 [9] for EN-DC case or MR-DC Resource Coordination Information IE as defined in TS 38.423 [28] for NGEN-DC and NE-DC cases.
YES
ignore
DU To CU RRC Information

O

9.3.1.26

YES
reject
DRB Setup List

0..1

The List of DRBs which are successfully established.
YES
ignore
>DRB Setup Item IEs

1 .. <maxnoofDRBs>


EACH
ignore
>>DRB ID
M

9.3.1.8

-

>>LCID
O

9.3.1.35
LCID for the primary path or for the split secondary path for fallback to split bearer if PDCP duplication is applied.
-

>>DL UP TNL Information to be setup List

1


-

>>>DL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofDLUPTNLInformation>


-

>>>>DL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

>>Additional PDCP Duplication TNL List

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. < maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

>>Current QoS Parameters Set Index
O

Alternative QoS Parameters Set Index
9.3.1.123
Index to the currently fulfilled alternative QoS parameters set. 
YES
ignore
DRB Modified List

0..1

The List of DRBs which are successfully modified.
YES
ignore
>DRB Modified Item IEs

1 .. <maxnoofDRBs>


EACH
ignore
>>DRB ID
M

9.3.1.8

-

>>LCID
O

9.3.1.35
LCID for the primary path or for the split secondary path for fallback to split bearer if PDCP duplication is applied.
-

>>DL UP TNL Information to be setup List

1


-

>>>DL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofDLUPTNLInformation>


-

>>>>DL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

>>RLC Status
O

9.3.1.69
Indicates the RLC has been re-established at the gNB-DU.
YES
ignore
>>Additional PDCP Duplication TNL List

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. < maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

>>Current QoS Parameters Set Index
O

Alternative QoS Parameters Set Index
9.3.1.123
Index to the currently fulfilled alternative QoS parameters set. 
YES
ignore
SRB Failed to be Setup List

0..1

The List of SRBs which are failed to be established.
YES
ignore
>SRB Failed to be Setup Item IEs

1 .. <maxnoofSRBs>


EACH
ignore
>>SRB ID
M

9.3.1.7

-

>>Cause
O

9.3.1.2

-

DRB Failed to be Setup List

0..1

The List of DRBs which are failed to be setup.
YES
ignore
>DRB Failed to be Setup Item IEs

1 .. <maxnoofDRBs>


EACH
ignore
>>DRB ID
M

9.3.1.8

-

>>Cause
O

9.3.1.2

-

SCell Failed To Setup List

0..1


YES
ignore
>SCell Failed to Setup Item

1 .. <maxnoofSCells>


EACH
ignore
>>SCell ID
M

NR CGI
9.3.1.12
SCell Identifier in gNB
-

>>Cause
O

9.3.1.2

-

DRB Failed to be Modified List

0..1

The List of DRBs which are failed to be modified.
YES
ignore
>DRB Failed to be Modified Item IEs

1 .. <maxnoofDRBs>


EACH
ignore
>>DRB ID
M

9.3.1.8

-

>>Cause
O

9.3.1.2

-

Inactivity Monitoring Response
O

ENUMERATED (Not-supported, ...)

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore
C-RNTI
O

9.3.1.32
C-RNTI allocated at the gNB-DU
YES
ignore
Associated SCell List 
O

9.3.1.77

YES
ignore
SRB Setup List

0..1


YES
ignore
>SRB Setup Item

1 .. <maxnoofSRBs>


EACH
ignore
>>SRB ID
M

9.3.1.7

-

>>LCID
M

9.3.1.35
LCID for the primary path if PDCP duplication is applied
-

SRB Modified List

0..1


YES
ignore
>SRB Modified Item

1 .. <maxnoofSRBs>


EACH
ignore
>>SRB ID
M

9.3.1.7

-

>>LCID
M

9.3.1.35
LCID for the primary path if PDCP duplication is applied
-

Full Configuration
O

ENUMERATED (full, ...)

YES
reject
BH RLC Channel Setup List

0..1

The list of BH RLC channels which are successfully established.
YES
ignore
>BH RLC Channel Setup Item

1 .. <maxnoofBHRLCChannels>


EACH
ignore
>>BH RLC CH ID
M

9.3.1.113

-

BH RLC Channel Failed to be Setup List

0..1

The list of BH RLC channels whose setup has failed.
YES
ignore
>BH RLC Channel Failed to be Setup Item 

1 .. <maxnoofBHRLCChannels>


EACH
ignore
>>BH RLC CH ID
M

9.3.1.113

-

>>Cause
O

9.3.1.2

-

BH RLC Channel Modified List

0..1

The list of BH RLC channels which are successfully modified.
YES
ignore
>BH RLC Channel Modified Item

1 .. <maxnoofBHRLCChannels>


EACH
ignore
>>BH RLC CH ID
M

9.3.1.113

-

BH RLC Channel Failed to be Modified List

0..1

The list of BH RLC channels whose modification has failed.
YES
ignore
>BH RLC Channel Failed to be Modified Item 

1 .. <maxnoofBHRLCChannels>


EACH
ignore
>>BH RLC CH ID
M

9.3.1.113

-

>>Cause
O

9.3.1.2

-

SL DRB Setup List

0..1

The List of SL DRBs which are successfully established.
YES
ignore
>SL DRB Setup Item IEs

1 .. <maxnoofSLDRBs>


EACH
ignore
>>SL DRB ID
M

9.3.1.120

-

SL DRB Modified List

0..1

The List of SL DRBs which are successfully modified.
YES
ignore
>SL DRB Modified Item IEs

1 .. <maxnoofSLDRBs>


EACH
ignore
>>SL DRB ID
M

9.3.1.120

-

SL DRB Failed To Setup List

0..1

The List of SL DRBs which are failed to be setup.
YES
ignore
>SL DRB Failed To Setup Item

1 .. <maxnoofSLDRBs>


EACH
ignore
>>SL DRB ID
M

9.3.1.120

-

>>cause
O

9.3.1.2

-

SL DRB Failed To be Modified List

0..1

The List of SL DRBs which are failed to be modified.
YES
ignore
>SL DRB Failed To be Modified Item

1 .. <maxnoofSLDRBs>


EACH
ignore
>>SL DRB ID
M

9.3.1.120

-

>>cause
O

9.3.1.2

-

Requested Target Cell ID
O

NR CGI
9.3.1.12
Special Cell indicated in the UE CONTEXT MODIFICATION REQUEST message.
YES
reject

Range bound
Explanation
maxnoofSRBs
Maximum no. of SRB allowed towards one UE, the maximum value is 8. 
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 
maxnoofDLUPTNLInformation
Maximum no. of DL UP TNL Information allowed towards one DRB, the maximum value is 2.
maxnoofSCells
Maximum no. of SCells allowed towards one UE, the maximum value is 32.
maxnoofBHRLCChannels
Maximum no. of BH RLC channels allowed towards one IAB-node, the maximum value is 65536.
maxnoofSLDRBs
Maximum no. of SL DRB allowed for NR sidelink communication per UE, the maximum value is 512.
maxnoofAdditionalPDCPDuplicationTNL
Maximum no. of additional UP TNL Information allowed towards one DRB, the maximum value is 2. 

9.2.2.9	UE CONTEXT MODIFICATION FAILURE
This message is sent by the gNB-DU to indicate a context modification failure.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore
Requested Target Cell ID
O

NR CGI
9.3.1.12
Special Cell indicated in the UE CONTEXT MODIFICATION REQUEST message.
YES
reject

9.2.2.10	UE CONTEXT MODIFICATION REQUIRED
This message is sent by the gNB-DU to request the modification of a UE context.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Resource Coordination Transfer Container
O

OCTET STRING
Includes the SgNB Resource Coordination Information IE as defined in subclause 9.2.117 of TS 36.423 [9] for EN-DC case or MR-DC Resource Coordination Information IE as defined in TS 38.423 [28] for NGEN-DC and NE-DC cases.
YES
ignore
DU To CU RRC Information

O

9.3.1.26

YES
reject
DRB Required to Be Modified List

0..1


YES
reject
>DRB Required to Be Modified Item IEs

1 .. <maxnoofDRBs>


EACH
reject
>>DRB ID
M

9.3.1.8

-

>>DL UP TNL Information to be setup List 

0..1


-

>>>DL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofDLUPTNLInformation>


-

>>>>DL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

>>RLC Status
O

9.3.1.69
Indicates the RLC has been re-established at the gNB-DU.
YES
ignore
>>Additional PDCP Duplication TNL List 

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. <maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of DL PDUs.
-

SRB Required to be Released List

0..1


YES
reject
>SRB Required to be Released List Item IEs

1 .. <maxnoofSRBs>


EACH
reject
>>SRB ID
M

9.3.1.7

-

DRB Required to be Released List

0..1


YES
reject
>DRB Required to be Released List Item IEs

1 .. <maxnoofDRBs>


EACH
reject
>>DRB ID
M

9.3.1.8

-

Cause
M

9.3.1.2

YES
ignore
BH RLC Channel Required to be Released List

0..1


YES
reject
>BH RLC Channel Required to be Released Item IEs

1 .. <maxnoofBHRLCChannels>


EACH
reject
>>BH RLC CH ID
M

9.3.1.113

-

SL DRB Required to Be Modified List

0..1


YES
reject
>SL DRB Required to Be Modified Item IEs

1 .. <maxnoofSLDRBs> 


EACH
reject
>>SL DRB ID
M

9.3.1.120

-

SL DRB Required to be Released List

0..1


YES
reject
>SL DRB Required to be Release Item IEs

1 .. <maxnoofSLDRBs> 


EACH
reject
>>SL DRB ID
M

9.3.1.120

-

Candidate Cells To Be Cancelled List

0 .. <maxnoofCellsinCHO>


YES
reject
>Target Cell ID
M

NR CGI
9.3.1.12

-
-

Range bound
Explanation
maxnoofSRBs
Maximum no. of SRB allowed towards one UE, the maximum value is 8. 
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 
maxnoofDLUPTNLInformation
Maximum no. of DL UP TNL Information allowed towards one DRB, the maximum value is 2.
maxnoofBHRLCChannels
Maximum no. of BH RLC channels allowed towards one IAB-node, the maximum value is 65536.
maxnoofSLDRBs
Maximum no. of SL DRB allowed for NR sidelink communication per UE, the maximum value is 512.
maxnoofAdditionalPDCPDuplicationTNL
Maximum no. of additional UP TNL Information allowed towards one DRB, the maximum value is 2. 
maxnoofCellsinCHO
Maximum no. cells that can be prepared for a conditional mobility. Value is 8.

9.2.2.11	UE CONTEXT MODIFICATION CONFIRM
This message is sent by the gNB-CU to inform the gNB-DU the successful modification.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Resource Coordination Transfer Container
O

OCTET STRING
Includes the MeNB Resource Coordination Information IE as defined in subclause 9.2.116 of TS 36.423 [9] for EN-DC case or MR-DC Resource Coordination Information IE as defined in TS 38.423 [28] for NGEN-DC and NE-DC cases.
YES
ignore
DRB Modified List

0..1

The List of DRBs which are successfully modified.
YES
ignore
>DRB Modified Item IEs

1 .. <maxnoofDRBs>


EACH
ignore
>>DRB ID
M

9.3.1.8

-

>>UL UP TNL Information to be setup List

1


-

>>>UL UP TNL Information to Be Setup Item IEs

1 .. <maxnoofULUPTNLInformation>


-

>>>>UL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-CU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
>>Additional PDCP Duplication TNL List

0..1


YES
ignore
>>>Additional PDCP Duplication TNL Items

1 .. <maxnoofAdditionalPDCPDuplicationTNL>


EACH
ignore
>>>>Additional PDCP Duplication UP TNL Information
M

UP Transport Layer Information
9.3.2.1
gNB-DU endpoint of the F1 transport bearer. For delivery of UL PDUs.
-

>>>>BH Information
O

9.3.1.114

YES
ignore
RRC-Container
O

9.3.1.6
Includes the DL-DCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8], encapsulated in a PDCP PDU.
YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore
Execute Duplication
O

ENUMERATED (true, ...)
This IE may be sent only if duplication has been configured for the UE. 
YES
Ignore
Resource Coordination Transfer Information
O

9.3.1.73

YES
ignore
SL DRB Modified List

0..1


YES
reject
>SL DRB Modified Item IEs

1 .. <maxnoofSLDRBs> 


EACH
reject
>>SL DRB ID
M

9.3.1.120

-


Range bound
Explanation
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 
maxnoofULUPTNLInformation
Maximum no. of UL UP TNL Information allowed towards one DRB, the maximum value is 2.
maxnoofSLDRBs
Maximum no. of SL DRB allowed for NR sidelink communication per UE, the maximum value is 512.
maxnoofAdditionalPDCPDuplicationTNL
Maximum no. of additional UP TNL Information allowed towards one DRB, the maximum value is 2. 

9.2.2.11A	UE CONTEXT MODIFICATION REFUSE
This message is sent by the gNB-CU to indicate the UE context modification was unsuccessful.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.2.12	UE INACTIVITY NOTIFICATION
This message is sent by the gNB-DU to provide information about the UE activity to the gNB-CU.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
DRB Activity List 

1


YES
reject
>DRB Activity Item 

1 .. <maxnoofDRBs> 


EACH
reject
>>DRB ID
M

9.3.1.8

-

>>DRB Activity
O

ENUMERATED (Active, Not active)

-


Range bound
Explanation
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 

9.2.2.13		NOTIFY
This message is sent by the gNB-DU to notify the gNB-CU that the QoS for already established DRBs associated with notification control is not fulfilled any longer or it is fulfilled again.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
DRB Notify List

1


YES
reject
>DRB Notify Item IEs

<1 .. maxnoofDRBs>


EACH
reject
>>DRB ID
M

9.3.1.8

-

>>Notification Cause
M

ENUMERATED(Fulfilled, Not-Fulfilled, ...)

-

>>Current QoS Parameters Set Index
O

Alternative QoS Parameters set Notify Index
9.3.1.124
Index to the currently fulfilled alternative QoS parameters set. Value 0 indicates that NG-RAN cannot even fulfil the lowest alternative parameter set.
YES
ignore

Range bound
Explanation
maxnoofDRBs
Maximum no. of DRB allowed towards one UE, the maximum value is 64. 

9.2.2.14	ACCESS SUCCESS
This message is sent by the gNB-DU to inform the gNB-CU of which cell the UE has successfully accessed during conditional handover or conditional PSCell change.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
NR CGI
M

9.3.1.12

YES
reject

9.2.3	RRC Message Transfer messages
9.2.3.1	INITIAL UL RRC MESSAGE TRANSFER
This message is sent by the gNB-DU to transfer the initial layer 3 message to the gNB-CU over the F1 interface.
Direction: gNB-DU gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
NR CGI
M

9.3.1.12
NG-RAN Cell Global Identifier (NR CGI)
YES
reject
C-RNTI
M

9.3.1.32
C-RNTI allocated at the gNB-DU
YES
reject
RRC-Container
M

9.3.1.6
Includes the UL-CCCH-Message IE or UL-CCCH1-Message IE as defined in subclause 6.2 of TS 38.331 [8].
YES
reject
DU to CU RRC Container
O

OCTET STRING 
CellGroupConfig IE as defined in subclause 6.3.2 in TS 38.331 [8]. Required at least to carry SRB1 configuration. The ReconfigurationWithSync field is not included in the CellGroupConfig IE.
YES
reject
SUL Access Indication
O

ENUMERATED (true, ...)

YES
ignore
Transaction ID
M

9.3.1.23

YES
Ignore
RAN UE ID
O

OCTET STRING (SIZE (8))

YES
ignore
RRC-Container-RRCSetupComplete
O

9.3.1.6
Includes the UL-DCCH-Message IE including the RRCSetupComplete message, as defined in subclause 6.2 of TS 38.331 [8].
YES
ignore

9.2.3.2	DL RRC MESSAGE TRANSFER
This message is sent by the gNB-CU to transfer the layer 3 message to the gNB-DU over the F1 interface.
Direction: gNB-CU gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
old gNB-DU UE F1AP ID
O

9.3.1.5

YES
reject
SRB ID
M

9.3.1.7

YES
reject
Execute Duplication 
O

ENUMERATED (true, ...)

YES
ignore
RRC-Container
M

9.3.1.6
Includes the DL-DCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8] encapsulated in a PDCP PDU, or the DL-CCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8].
YES
reject
RAT-Frequency Priority Information
O

9.3.1.34

YES
reject
RRC Delivery Status Request
O

ENUMERATED (true, …)
Indicates whether RRC DELIVERY REPORT procedure is requested for the RRC message.
YES
ignore
UE Context not retrievable
O

ENUMERATED (true, ...)

YES
reject
Redirected RRC message
O

RRC Container
9.3.1.6
Includes the UL-CCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8].
YES
reject
PLMN Assistance Info for Network Sharing
O

PLMN Identity
9.3.1.14

YES
ignore
New gNB-CU UE F1AP ID
O

gNB-CU UE F1AP ID
9.3.1.4

YES
reject
Additional RRM Policy Index
O

9.3.1.90

YES
ignore

9.2.3.3	UL RRC MESSAGE TRANSFER
This message is sent by the gNB-DU to transfer the layer 3 message to the gNB-CU over the F1 interface.
Direction: gNB-DU gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
SRB ID
M

9.3.1.7

YES
reject
RRC-Container
M

9.3.1.6
Includes the UL-DCCH-Message IE as defined in subclause 6.2 of TS 38.331 [8], encapsulated in a PDCP PDU.
YES
reject
Selected PLMN ID
O

PLMN Identity
9.3.1.14

YES
reject
New gNB-DU UE F1AP ID
O

gNB-DU UE F1AP ID
9.3.1.5

YES
reject

9.2.3.4	RRC DELIVERY REPORT
This message is sent by the gNB-DU to inform the gNB-CU about the delivery status of DL RRC messages.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
RRC Delivery Status
M

9.3.1.71

YES
ignore
SRB ID
M

9.3.1.7

YES
ignore

9.2.4	Warning Message Transmission Messages
9.2.4.1	WRITE-REPLACE WARNING REQUEST
This message is sent by the gNB-CU to request the start or overwrite of the broadcast of a warning message.
Direction: gNB-CU  gNB-DU 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
PWS System Information
M

9.3.1.58
This IE includes the system information for public warning, as defined in TS 38.331 [8].
YES
reject
Repetition Period
M

9.3.1.59

YES
reject
Number of Broadcasts Requested
M

9.3.1.60

YES
reject
Cell To Be Broadcast List

0..1


YES
reject
>Cell to Be Broadcast Item IEs

1.. <maxCellingNBDU>


EACH
reject
>>NR CGI
M

9.3.1.12

-


Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.

9.2.4.2	WRITE-REPLACE WARNING RESPONSE
This message is sent by the gNB-DU to acknowledge the gNB-CU on the start or overwrite request of a warning message.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cell Broadcast Completed List

0..1


YES
reject
>Cell Broadcast Completed Item IEs

1.. <maxCellingNBDU>


EACH
reject
>>NR CGI
M

9.3.1.12

-

Criticality Diagnostics
O

9.3.1.3

YES
ignore
Dedicated SI Delivery Needed UE List

0..1

List of UEs unable to receive system information from broadcast
YES
ignore
>Dedicated SI Delivery Needed UE Item

1 .. <maxnoofUEIDs>


EACH
ignore
>>gNB-CU UE F1AP ID
M

9.3.1.4

-

>>NR CGI
M

9.3.1.12

-


Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.
maxnoofUEIDs
Maximum no. of UEs that can be served by a gNB-DU. Value is 65536.

9.2.4.3	PWS CANCEL REQUEST
This message is forwarded by the gNB-CU to gNB-DU to cancel an already ongoing broadcast of a warning message
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Number of Broadcasts Requested
M

9.3.1.60
This IE is not used in this version of the specification
YES
reject
Cell Broadcast To Be Cancelled List

0..1


YES
reject
>Cell Broadcast to Be Cancelled Item IEs

1.. <maxCellingNBDU>


EACH
reject
>>NR CGI
M

9.3.1.12

-

Cancel-all Warning Messages Indicator
O


ENUMERATED (true, ...)
YES
reject
Notification Information
O


This IE is ignored If the Cancel-all Warning Messages Indicator IE is included.
YES
reject
>Message Identifier
M

9.3.1.81



>Serial Number
M

9.3.1.82




Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.

9.2.4.4	PWS CANCEL RESPONSE
This message is sent by the gNB-DU to indicate the list of warning areas where cancellation of the broadcast of the identified message was successful and unsuccessful.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cell Broadcast Cancelled List

0..1


YES
reject
>Cell Broadcast Cancelled Item IEs

1.. <maxCellingNBDU>


EACH
reject
>>NR CGI
M

9.3.1.12

-

>>Number of Broadcasts
M

INTEGER (0..65535)
This IE is set to ‘0’ if valid results are not known or not available. It is set to 65535 if the counter results have overflowed.
-

Criticality Diagnostics
O

9.3.1.3

YES
ignore

Range bound
Explanation
maxCellingNBDU
Maximum no. of cells that can be served by a gNB-DU. Value is 512.

9.2.4.5	PWS RESTART INDICATION
This message is sent by the gNB-DU to inform the gNB-CU that PWS information for some or all cells of the gNB-DU are available if needed.
Direction: gNB-DU gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
NR CGI List for Restart List

1


YES
reject
>NR CGI List for Restart Item IEs

1..<maxCellingNBDU>


EACH 
reject
>>NR CGI
M

9.3.1.12

-


Range bound
Explanation
maxCellingNBDU
Maximum no. of cells that can be served by a gNB-DU. Value is 512.

9.2.4.6	PWS FAILURE INDICATION
This message is sent by the gNB-DU to inform the gNB-CU that ongoing PWS operation for one or more cells of the gNB-DU has failed.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
PWS failed NR CGI List

0..1


YES
reject
>PWS failed NR CGI Item IEs

1..<maxCellingNBDU>


EACH 
reject
>>NR CGI
M

9.3.1.12

-

>>Number of Broadcasts
M

INTEGER (0..65535)
This IE is not used in the specification and is ignored.
-


Range bound
Explanation
maxCellingNBDU
Maximum no. of cells that can be served by a gNB-DU. Value is 512.

9.2.5	System Information messages
9.2.5.1	SYSTEM INFORMATION DELIVERY COMMAND
This message is sent by the gNB-CU and is used to enable the gNB-DU to broadcast the requested other SI.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
NR CGI
M

9.3.1.12
NR cell identifier
YES
reject
SIType List
M

9.3.1.62

YES
reject
Confirmed UE ID
M

gNB-DU UE F1AP ID
9.3.1.5

YES
reject

9.2.6	Paging messages
9.2.6.1	PAGING
This message is sent by the gNB-CU and is used to request the gNB-DU to page UEs.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality

Message Type
M

9.3.1.1

YES
ignore

UE Identity Index value
M

9.3.1.39

YES
reject

CHOICE Paging Identity 
M



YES
reject

>RAN UE Paging identity
M

9.3.1.43

-


>CN UE paging identity 
M

9.3.1.44

-


Paging DRX
O

9.3.1.40
It is defined as the minimum between the RAN UE Paging DRX and CN UE Paging DRX
YES
ignore

Paging Priority
O

9.3.1.41

YES
ignore

Paging Cell List 

1


YES
ignore

>Paging Cell Item IEs

1 .. <maxnoofPagingCells>


EACH
ignore

>>NR CGI
M

9.3.1.12

-


Paging Origin
O

9.3.1.79

YES
ignore

Range bound
Explanation
maxnoofPagingCells
Maximum no. of paging cells, the maximum value is 512. 

9.2.7	Trace Messages
9.2.7.1	TRACE START
This message is sent by the gNB-CU to initiate a trace session for a UE.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Trace Activation
M

9.3.1.88

YES
ignore

9.2.7.2	DEACTIVATE TRACE
This message is sent by the gNB-CU to deactivate a trace session.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Trace ID
M

OCTET STRING (SIZE(8))
As per Trace ID in Trace Activation IE
YES
ignore

9.2.7.3	CELL TRAFFIC TRACE
This message is sent by the gNB-DU to to transfer trace specific information.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
Trace ID
M

OCTET STRING (SIZE(8))
This IE is composed of the following: 
Trace Reference defined in TS 32.422 [29] (leftmost 6 octets, with PLMN information encoded as in 9.3.1.14), and
Trace Recording Session Reference defined in TS 32.422 [29] (last 2 octets).
YES
ignore
Trace Collection Entity IP Address
M

Transport Layer Address
9.3.2.3
For File based Reporting.
Defined in TS 32.422 [29].
Should be ignored if URI is present
YES
ignore
Privacy Indicator
O

ENUMERATED (Immediate MDT, Logged MDT, ...)

YES
ignore
Trace Collection Entity URI
O

URI
9.3.2.6
For Streaming based Reporting.
Defined in TS 32.422 [11]
Replaces Trace Collection Entity IP Address if present
YES
ignore

9.2.8	Radio Information Transfer messages
9.2.8.1	DU-CU RADIO INFORMATION TRANSFER
This message is sent by a gNB-DU to a gNB-CU, to convey radio-related information.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
CHOICE DU-CU Radio Information Type
M



YES
ignore
>RIM






>>DU-CU RIM Information
M

9.3.1.91

-
-

9.2.8.2	CU-DU RADIO INFORMATION TRANSFER
This message is sent by a gNB-CU to a gNB-DU, to convey radio-related information.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
CHOICE CU-DU Radio Information Type
M



YES
ignore
>RIM






>>CU-DU RIM Information
M

9.3.1.92

-
-

9.2.9	IAB messages
9.2.9.1	BAP MAPPING CONFIGURATION
This message is sent by the gNB-CU to provide the backhaul routing information and/or traffic mapping information to the gNB-DU.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
BH Routing Information Added List

0...1


YES
ignore
>BH Routing Information Added List Item

1.. <maxnoofRoutingEntries>


EACH
ignore
>>BAP Routing ID
M

9.3.1.110

-

>>Next-Hop BAP Address
M

9.3.1.111
Indicates the BAP address of the next hop IAB-node or IAB-donor-DU.
-

BH Routing Information Removed List

0...1


YES
ignore
>BH Routing Information Removed List Item

1.. <maxnoofRoutingEntries>


EACH
ignore
>>BAP Routing ID
M

9.3.1.110

-

Traffic Mapping Information
O

9.3.1.95

YES
ignore

Range bound
Explanation
maxnoofRoutingEntries
Maximum no. of routing entries, the maximum value is 1024.

9.2.9.2	BAP MAPPING CONFIGURATION ACKNOWLEDGE
This message is sent by the gNB-DU as a response to a BAP MAPPING CONFIGURATION message.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.9.2A	BAP MAPPING CONFIGURATION FAILURE
This message is sent by the gNB-DU to indicate a BAP Mapping Configuration Update failure.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Time to wait
O

9.3.1.13

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.9.3	GNB-DU RESOURCE CONFIGURATION
This message is sent by the gNB-CU to provide the resource configuration for an gNB-DU.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Activated Cells to Be Updated List

0..1

List of activated cells served by the IAB-DU or the IAB-donor-DU whose resource configuration is updated
YES
reject
>Activated Cells To Be Updated List Item

1 .. <maxnoofServedCellsIAB>


EACH
reject
>> NR CGI
M

9.3.1.12

-

>>CHOICE IAB-DU Cell Resource Configuration-Mode-Info
M



-

>>>FDD






>>>>FDD Info

1


-

>>>>>gNB-DU Cell Resource Configuration-FDD-UL
M

gNB-DU Cell Resource Configuration 
9.3.1.107
Contains FDD UL resource configuration of the gNB-DU’s cell.
-

>>>>>gNB-DU Cell Resource Configuration-FDD-DL
M

gNB-DU Cell Resource Configuration 
9.3.1.107
Contains FDD DL resource configuration of the gNB-DU’s cell.
-

>>>TDD






>>>>TDD Info

1




>>>>>gNB-DU Cell Resource Configuration-TDD
M

gNB-DU Cell Resource Configuration 
9.3.1.107
Contains TDD resource configuration of the gNB-DU’s cell.
-

Child-Nodes List

0..1

List of child IAB-nodes served by the IAB-DU or IAB-donor-DU.
YES
reject
>Child-Nodes List Item

1 .. <maxnoofChildIABNodes>


EACH
reject
>>gNB-CU UE F1AP ID
M

9.3.1.4
Identifier of a descendant node IAB-MT at the IAB-donor-CU.
YES
reject
>>gNB-DU UE F1AP ID
M

9.3.1.5
Identifier of a child-node IAB-MT at an IAB-DU or IAB-donor-DU.
YES
reject
>>Child-Node Cells List

0..1

List of cells served by the child-node IAB-DU whose resource configuration is updated.
YES
reject
>>>Child-Node Cells List Item

1 .. <maxnoofServedCellsIAB >


EACH
reject
>>>>NR CGI
M

9.3.1.12

-

>>>>CHOICE IAB-DU Cell Resource Configuration-Mode-Info
O



-

>>>>>FDD




-

>>>>>>FDD Info

1


-

>>>>>>>gNB-DU Cell Resource Configuration-FDD-UL
M

gNB-DU Cell Resource Configuration 
9.3.1.107
Contains FDD UL resource configuration of gNB-DU’s cell.
-

>>>>>>>gNB-DU Cell Resource Configuration-FDD-DL
M

gNB-DU Cell Resource Configuration 
9.3.1.107
Contains FDD DL resource configuration of gNB-DU’s cell.
-

>>>>>TDD




-

>>>>>>TDD Info

1


-

>>>>>>>gNB-DU Cell Resource Configuration-TDD
M

gNB-DU Cell Resource Configuration 
9.3.1.107
Contains TDD resource configuration of gNB-DU’s cell.
-

>>>>IAB STC Info
O

9.3.1.109
STC configuration of child-node IAB-DU’s cell.


>>>>RACH Config Common
O

OCTET STRING
Corresponds to the rach-ConfigCommon as defined in subclause 6.3.2 of TS 38.331 [8].


>>>>RACH Config Common IAB
O

OCTET STRING
Corresponds to the IAB-specific rach-ConfigCommonIAB-r16 as defined in subclause 6.3.2 of TS 38.331 [8].


>>>>CSI-RS Configuration
O

OCTET STRING
Corresponds to the NZP-CSI-RS-Resource as defined in subclause 6.3.2 of TS 38.331 [8].


>>>>SR Configuration
O

OCTET STRING
Corresponds to the SchedulingRequestResourceConfig as defined in subclause 6.3.2 of TS 38.331 [8].


>>>>PDCCH Configuration SIB1
O

OCTET STRING
Corresponds to the PDCCH-ConfigSIB1 as defined in subclause 6.3.2 of TS 38.331 [8].


>>>>SCS Common
O

OCTET STRING
Corresponds to the subCarrierSpacingCommon as defined in subclause 6.2.2 of TS 38.331 [8].


>>>>Multiplexing Info
O

9.3.1.108
Contains information on multiplexing with cells configured for collocated IAB-MT.



Range bound
Explanation
maxnoofChildIABNodes
Maximum number of child nodes served by an IAB-DU or IAB-donor-DU. Value is 1024.
maxnoofServedCellsIAB
Maximum number of cells served by an IAB-DU or IAB-donor-DU. Value is 512.

9.2.9.4	GNB-DU RESOURCE CONFIGURATION ACKNOWLEDGE
This message is sent by the gNB-DU to acknowledge the reception of an GNB-DU RESOURCE CONFIGURATION message.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.9.4A	GNB-DU RESOURCE CONFIGURATION FAILURE
This message is sent by the gNB-DU to indicate a gNB-DU Resource Configuration Update failure.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Time to wait
O

9.3.1.13

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.9.5	IAB TNL ADDRESS REQUEST
This message is sent by the gNB-CU to request the allocation of IP addresses for IAB-node(s).
Direction: gNB-CU  gNB-DU. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
IAB IPv4 Addresses Requested
O

IAB TNL Addresses Requested
9.3.1.101

YES
reject
CHOICE IAB IPv6 Request Type
O



YES
reject
>IPv6 Address




-

>>IAB IPv6 Addresses Requested
M

IAB TNL Addresses Requested
9.3.1.101

-

>IPv6 Prefix




-

>>IAB IPv6 Address Prefixes Requested
M

IAB TNL Addresses Requested
9.3.1.101

-

IAB TNL Addresses To Remove List

0..1


YES
reject
>IAB TNL Addresses To Remove Item

1..<maxnoofTLAsIAB>


EACH
reject
>>IAB TNL Address
M

9.3.1.102

-


Range bound
Explanation
maxnoofTLAsIAB
Maximum no. of individual IPv4/IPv6 addresses or IPv6 address prefixes that can be allocated in one procedure execution. The value is 1024.

9.2.9.6	IAB TNL ADDRESS RESPONSE
This message is sent by the gNB-DU to indicate the TNL addresses allocated to IAB-node(s).
Direction: gNB-DU  gNB-CU. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
IAB Allocated TNL Address List

1


YES
reject
>IAB Allocated TNL Address Item

1..<maxnoofTLAsIAB>


EACH
reject
>>IAB TNL Address
M

9.3.1.102

-

>>IAB TNL Address Usage
O

ENUMERATED (F1-C, F1-U, Non-F1, …)
The usage of the allocated IPv4 or IPv6 address or IPv6 address prefix.
-


Range bound
Explanation
maxnoofTLAsIAB
Maximum no. of IPv6 addresses or IPv6 address prefixes and/or individual IPv4 addresses that can be allocated in one procedure execution. The value is 1024. 

9.2.9.6A	IAB TNL ADDRESS FAILURE
This message is sent by the gNB-DU to indicate an IAB TNL Address Allocation failure.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Time to wait
O

9.3.1.13

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.9.7	IAB UP CONFIGURATION UPDATE REQUEST
This message is sent by the gNB-CU to provide the updated UL BH Information or the updated UL UP TNL Information/Address to the gNB-DU.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
UL UP TNL Information to Update List

0..1


YES
ignore
>UL UP TNL Information to Update List Item IEs 


1.. < maxnoofULUPTNLInformationforIAB>


EACH
ignore
>>UL UP TNL Information
M

UP Transport Layer Information
9.3.2.1
This field indicates the UL UP TNL Information used before configuration update.
-

>>New UL UP TNL Information
O

UP Transport Layer Information
9.3.2.1
If present, this field indicates the new UL UP TNL Information used after configuration update.
-

>>BH Information
M

9.3.1.114

-

UL UP TNL Address to Update List

0..1


YES
ignore
>UL UP TNL Address to Update List Item IEs

1.. < maxnoofUPTNLAddresses>


EACH
ignore
>>Old TNL Address
M

Transport Layer Address
9.3.2.3
The old UL UP Transport Layer Address of gNB-CU used for UL F1-U GTP Tunnel before the configuration update.
-

>>New TNL Address
M

Transport Layer Address
9.3.2.3
The corresponding new UL UP Transport Layer Address that replaces the old one.
-


Range bound
Explanation
maxnoofULUPTNLInformationforIAB
Maximum no. of UL UP TNL Information allowed towards one IAB node, the maximum value is 32768.
maxnoofUPTNLAddresses
Maximum no. of TNL addresses for F1-U. Value is 8.

9.2.9.8	IAB UP CONFIGURATION UPDATE RESPONSE
This message is sent by the gNB-DU to provide the updated TNL address(es) of the DL F1-U GTP tunnels to the gNB-CU.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore
DL UP TNL Address to Update List

0..1


YES
ignore
>DL UP TNL Address to Update List Item IEs

1.. < maxnoofUPTNLAddresses>


EACH
ignore
>>Old TNL Address
M

Transport Layer Address
9.3.2.3
The old DL UP Transport Layer Address of gNB-DU used for DL F1-U GTP tunnel before the configuration update.
-

>>New TNL Address
M

Transport Layer Address
9.3.2.3
The corresponding new Transport Layer Address used to replace the old one.
-


Range bound
Explanation
maxnoofUPTNLAddresses
Maximum no. of TNL addresses for F1-U. Value is 8.

9.2.9.9	IAB UP CONFIGURATION UPDATE FAILURE
This message is sent by the gNB-DU to indicate an IAB UP Configuration Update failure.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Time to wait
O

9.3.1.13

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.10	Self Optimisation Support Messages
9.2.10.1	ACCESS AND MOBILITY INDICATION
This message is sent by gNB-CU to gNB-DU to provide access and mobility information to the gNB-DU.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
RACH Report Information List

0..1


YES
ignore
>RACH Report Information Item

1 .. <maxnoofRACHReports>


-

>>RACH Report Container
M

OCTET STRING
RA-ReportList-r16 IE as defined in subclause 6.2.2 in TS 38.331 [8].
-

>>UE Assistant Identifier 
O

gNB-DU UE F1AP ID
9.3.1.5

-

RLF Report Information List

0..1


YES
ignore
>RLF Report Information Item

1 .. <maxnoofRLFReports>


-

>>NR UE RLF Report Container
M

OCTET STRING
nr-RLF-Report-r16 IE contained in the UEInformationResponse message defined in TS 38.331 [8].
-

>>UE Assistant Identifier 
O

gNB-DU UE F1AP ID
9.3.1.5

-


Range bound
Explanation
maxnoofRACHReports
Maximum no. of RACH Reports, the maximum value is 64.
maxnoofRLFReports
Maximum no. of RLF Reports, the maximum value is 64.

9.2.11	Reference Time Information Reporting messages
9.2.11.1	REFERENCE TIME INFORMATION REPORTING CONTROL
This message is sent by the gNB-CU and is used to request the gNB-DU to deliver the accurate reference time information.
Direction: gNB-CU  gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
Reporting Request Type 
M

9.3.1.147

YES
reject

9.2.11.2	REFERENCE TIME INFORMATION REPORT
This message is sent by the gNB-DU and is used to report the accurate reference time information to the gNB-CU.
Direction: gNB-DU  gNB-CU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
ignore
Time Reference Information
M

9.3.1.148

YES
ignore

9.2.12	Messages for Positioning Procedures
9.2.12.1	POSITIONING ASSISTANCE INFORMATION CONTROL
This message is sent by the gNB-CU to transfer positioning assistance information.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
Positioning Assistance Information
O

OCTET STRING
Contains the Assistance Information IE as defined in TS 38.455 [37].
YES
reject
Broadcast 
O

ENUMERATED (start, stop, ...)

YES
reject
Positioning Broadcast Cells
O

9.3.1.191
The cell(s) that are requested to broadcast posSIB(s) according to the Positioning Assistance Information IE.
YES
reject
Routing ID
O

OCTET STRING

YES
reject

9.2.12.2	POSITIONING ASSISTANCE INFORMATION FEEDBACK
This message is sent by the gNB-DU to give feedback on positioning assistance information broadcasting.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
Positioning Assistance Information Failure List
O

OCTET STRING
Contains the Assistance Information IE as defined in TS 38.455 [37].
YES
reject
Positioning Broadcast Cells
O

9.3.1.191
The cells associated to the feedback provided in the Positioning Assistance Information Failure List IE.
YES
reject
Routing ID
O

OCTET STRING

YES
reject
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.3	POSITIONING MEASUREMENT REQUEST
This message is sent by the gNB-CU to request the gNB-DU to configure a positioning measurement.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
LMF Measurement ID
M

INTEGER (1..65536, …)

YES
reject
RAN Measurement ID
M

INTEGER (1..65536, …)

YES
reject
TRP Measurement Request List

1


YES
reject
>TRP Measurement Request Item

1..<maxnoofMeasTRPs>




>>TRP ID
M

9.3.1.197



>>Search Window Information
O

9.3.1.204



>>NR CGI
O

9.3.1.12
The Cell ID of the TRP identified by the TRP ID IE.
YES
ignore
Positioning Report Characteristics
M

ENUMERATED (OnDemand, Periodic, …)

YES
reject
Positioning Measurement Periodicity
C-ifReportCharacteristicsPeriodic

ENUMERATED (120ms, 240ms, 480ms, 640ms, 1024ms, 2048ms, 5120ms, 10240ms, 1min, 6min, 12min, 30min, …, 20480ms, 40960ms, extended)
The codepoint 120ms, 240ms, 480ms, 1024ms, 2048ms, 1min, 6min, 12min, and 30min are not applicable.
YES
reject
Positioning Measurement Quantities

1


YES
reject
> Positioning Measurement Quantities Item

1..<maxnoofPosMeas>


EACH

>> Positioning Measurement Type
M

ENUMERATED (gNB RX-TX, UL-SRS-RSRP, UL AoA, UL RTOA, …) 


-
>>Timing Reporting Granularity Factor
O

INTEGER (0..5)
TS 38.133 [38]


SFN Initialisation Time
O

Relative Time 1900
9.3.1.183
If this IE is not present, the TRP may assume that the value is same as its own SFN initialisation time.
YES
ignore
SRS Configuration
O

9.3.1.192

YES
ignore
Measurement Beam Information Request
O

ENUMERATED (true, ...)

YES
ignore
System Frame Number
O 

INTEGER(0..1023)

YES
ignore
Slot Number
O

INTEGER(0..79)

YES
ignore
Measurement Periodicity Extended
C-ifMeasPerExt

ENUMERATED (160ms, 320ms, 1280ms, 2560ms, 61440ms,
81920ms, 368640ms, 737280ms, 1843200ms, …)

YES
reject

Range bound
Explanation
maxnoofPosMeas
Maximum no. of measured quantities that can be configured and reported with one message. Value is 16384.
maxnoofMeasTRPs
Maximum no. of TRPs that can be included within one measurement message. Value is 64.

Condition
Explanation
ifReportCharacteristicsPeriodic
This IE shall be present if the Positioning Report Characteristics IE is set to the value "Periodic".
ifMeasPerExt
This IE shall be present if the Measurement Periodicity IE is set to the value "extended".

9.2.12.4	POSITIONING MEASUREMENT RESPONSE
This message is sent by the gNB-DU to report positioning measurements for the target UE.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
LMF Measurement ID
M

INTEGER (1..65536, …)

YES
reject
RAN Measurement ID
M

INTEGER (1..65536, …)

YES
reject
Positioning Measurement Result List

0..1


YES
reject
>Positioning Measurement Result List Item

1..< maxnoofMeasTRPs>




>>Positioning Measurement Result
M

9.3.1.166

-
-
>>TRP ID
M

9.3.1.197



>>NR CGI
O

9.3.1.12
The Cell ID of the TRP identified by the TRP ID IE.
YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

Range bound
Explanation
maxnoofMeasTRPs
Maximum no. of TRP measurements that can be included within one message. Value is 64.

9.2.12.5	POSITIONING MEASUREMENT FAILURE
This message is sent by the gNB-DU to report measurement failure.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
LMF Measurement ID
M

INTEGER (1..65536, …)

YES
reject
RAN Measurement ID
M

INTEGER (1..65536, …)

YES
reject
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.6	POSITIONING MEASUREMENT REPORT
This message is sent by the gNB-DU to report positioning measurements for the target UE.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
LMF Measurement ID
M

INTEGER (1..65536, …)

YES
reject
RAN Measurement ID
M

INTEGER (1..65536, …)

YES
reject
Positioning Measurement Result List

1


YES
reject
>Positioning Measurement Result List Item

1..<maxnoofMeasTRPs>


EACH

>>Positioning Measurement Result
M

9.3.1.166

-
-
>>TRP ID
M

9.3.1.197

-
-
>>NR CGI
O

9.3.1.12
The Cell ID of the TRP identified by the TRP ID IE.
YES
ignore

Range bound
Explanation
maxnoofMeasTRPs
Maximum no. of TRP measurements that can be included within one message. Value is 64.

9.2.12.7	POSITIONING MEASUREMENT ABORT
This message is sent by the gNB-CU to request the gNB-DU to abort a positioning measurement.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
LMF Measurement ID
M

INTEGER (1.. 65536,…)

YES
reject
RAN Measurement ID
M

INTEGER (1..65536,…)

YES
reject

9.2.12.8	POSITIONING MEASUREMENT FAILURE INDICATION
This message is sent by the gNB-DU to indicate that the previously requested positioning measurements can no longer be reported.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
LMF Measurement ID
M

INTEGER (1.. 65536,…)

YES
reject
RAN Measurement ID
M

INTEGER (1..65536,…)

YES
reject
Cause
M

9.3.1.2

YES
ignore

9.2.12.9	POSITIONING MEASUREMENT UPDATE
This message is sent by the gNB-CU to update a previously configured measurement.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
Transaction ID
M

9.3.1.23

YES
reject
LMF Measurement ID
M

INTEGER (1..65536,…)

YES
reject
RAN Measurement ID
M

INTEGER (1..65536,…)

YES
reject
SRS Configuration
O

9.3.1.192

YES
ignore

9.2.12.10	TRP INFORMATION REQUEST
This message is sent by a gNB-CU to request information for TRPs hosted by a gNB-DU.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
TRP list

 0..1


YES
ignore
>TRP list Item

1..<maxnoofTRPs>


EACH
ignore
>>TRP ID
M

9.3.1.197

-

TRP Information Type List

1


YES
reject
>TRP Information Type Item

1 .. <maxnoofTRPInfoTypes>


EACH
reject
>>TRP Information Type Item
M

ENUMERATED (nr pci, ng-ran cgi, nr arfcn, prs config, ssb config, sfn init time, spatial direction info, geo-coordinates, …, trp type)

-


Range bound
Explanation
maxnoofTRPInfoTypes
Maximum no of TRP information types that can be requested and reported with one message. Value is 64.
maxnoofTRPs
Maximum no. of TRPs in a NG-RAN node. Value is 65535.

9.2.12.11	TRP INFORMATION RESPONSE
This message is sent by a gNB-DU to convey TRP information to a gNB-CU.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
TRP Information List

1


YES
ignore
>TRP Information Item

1 .. <maxnoofTRPs>


EACH
ignore
>>TRP Information
M

9.3.1.176



Criticality Diagnostics
O

9.3.1.3

YES
ignore

Range bound
Explanation
maxnoofTRPs
Maximum no. of TRPs in a gNB-DU. Value is 65535.

9.2.12.12	TRP INFORMATION FAILURE
This message is sent by a gNB-DU node to indicate that the requested TRP information cannot be provided to a gNB-CU.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
Transaction ID
M

9.3.1.23

YES
reject
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.13	POSITIONING INFORMATION REQUEST
This message is sent by the gNB-CU to indicate to the gNB-DU the need to configure the UE to transmit SRS signals for uplink positioning measurement.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
Requested SRS Transmission Characteristics
O

9.3.1.175

YES
ignore

9.2.12.14	POSITIONING INFORMATION RESPONSE
This message is sent by the gNB-DU to provide the configured SRS information to the gNB-CU.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
SRS Configuration
O

9.3.1.192

YES
ignore
SFN Initialisation Time
O

Relative Time 1900
9.3.1.183

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.15	POSITIONING INFORMATION FAILURE
This message is sent by the gNB-DU to indicate that no SRS transmissions could be configured for the UE for uplink positioning measurement.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.16	POSITIONING ACTIVATION REQUEST
This message is sent by the gNB-CU to cause the gNB-DU to activate/trigger UL SRS transmission by the UE.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
CHOICE SRS type
M



YES
reject
>Semi-persistent






>>SRS Resource Set ID
M

9.3.1.180

-
-
>>SRS Spatial Relation
O

Spatial Relation Information
9.3.1.181
This IE is ignored if the Spatial Relation Information per SRS Resource IE is present.
-
-
>>Spatial Relation Information per SRS Resource
O

9.3.1.210

YES
ignore
>Aperiodic






>>Aperiodic
M

ENUMERATED (true, …)

-
-
>>SRS Resource Trigger
O 

9.3.1.182

-
-
Activation Time
O

 Relative Time 1900
9.3.1.183
Indicates the start time when the SRS activation is requested
YES
ignore

9.2.12.17	POSITIONING ACTIVATION RESPONSE
This message is sent by the gNB-DU to confirm successful UL SRS activation in the UE.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
System Frame Number
O

INTEGER(0..1023)

YES
ignore
Slot Number
O

INTEGER(0..79)

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.18	POSITIONING ACTIVATION FAILURE
This message is sent by the gNB-DU to indicate that activation of UL SRS transmission in the UE was unsuccessful.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.19	POSITIONING DEACTIVATION
This message is sent by the gNB-CU to cause the NG RAN node to deactivate UL SRS transmission or release all the transmission by the UE.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
CHOICE Abort Transmission
M



YES
ignore
>SRS Resource Set ID deactivation






>>SRS Resource Set ID
M

9.3.1.180

-

>Release ALL


NULL




9.2.12.20	E-CID MEASUREMENT INITIATION REQUEST
This message is sent by gNB-CU to initiate E-CID measurements.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
LMF UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
RAN UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
E-CID Report Characteristics
M

ENUMERATED (OnDemand, Periodic, …)

YES
reject
E-CID Measurement Periodicity
C-ifReportCharacteristicsPeriodic

ENUMERATED (120ms, 240ms, 480ms, 640ms, 1024ms, 2048ms, 5120ms, 10240ms, 1min, 6min, 12min, 30min, …, 20480ms, 40960ms, extended)
The codepoint “extended” is not applicable.
YES
reject
E-CID Measurement Quantities

1 .. <maxnoofMeasE-CID>


EACH
reject
>E-CID Measurement Quantities Item
M

ENUMERATED (Default, NR Angle of Arrival, …)
If “Default” is the only requested measurement quantity, it indicates that the Measured Results List IE need not be included in response or reporting messages.
-


Range bound
Explanation
maxnoofMeasE-CID
Maximum no. of E-CID measured quantities that can be configured and reported with one message. Value is 64.

Condition
Explanation
ifReportCharacteristicsPeriodic
This IE shall be present if the E-CID Report Characteristics IE is set to the value "Periodic".

9.2.12.21	E-CID MEASUREMENT INITIATION RESPONSE
This message is sent by gNB-DU to indicate that the requested E-CID measurement is successfully initiated.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
LMF UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
RAN UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
E-CID Measurement Result
O

9.3.1.199

YES
ignore
Cell Portion ID
O

9.3.1.200

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.22	E-CID MEASUREMENT INITIATION FAILURE
This message is sent by gNB-DU to indicate that the requested E-CID measurement cannot be initiated.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
reject
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
LMF UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
RAN UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
Cause
M

9.3.1.2

YES
ignore
Criticality Diagnostics
O

9.3.1.3

YES
ignore

9.2.12.23	E-CID MEASUREMENT FAILURE INDICATION
This message is sent by gNB-DU to indicate that the previously requested E-CID measurement can no longer be reported.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
LMF UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
RAN UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
Cause
M

9.3.1.2

YES
ignore

9.2.12.24	E-CID MEASUREMENT REPORT
This message is sent by gNB-DU to report the results of the requested E-CID measurement.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
LMF UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
RAN UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
E-CID Measurement Result
M

9.3.1.199

YES
ignore
Cell Portion ID
O

9.3.1.200

YES
ignore

9.2.12.25	E-CID MEASUREMENT TERMINATION COMMAND
This message is sent by the gNB-CU to terminate the requested E-CID measurement.
Direction: gNB-CU  gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M

9.3.1.4

YES
reject
gNB-DU UE F1AP ID
M

9.3.1.5

YES
reject
LMF UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject
RAN UE Measurement ID
M

INTEGER (1.. 256, …)

YES
reject

9.2.12.26	POSITIONING INFORMATION UPDATE
This message is sent by the gNB-DU to indicate that a change in the SRS configuration has occurred.
Direction: gNB-DU  gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Message Type
M

9.3.1.1

YES
ignore
gNB-CU UE F1AP ID
M 

9.3.1.4

YES
reject
gNB-DU UE F1AP ID 
M

9.3.1.5

YES
reject
SRS configuration
O

9.3.1.192

YES
ignore
SFN Initialisation Time
O

Relative Time 1900
9.3.1.183

YES
ignore

9.3	Information Element Definitions
9.3.1	Radio Network Layer Related IEs
9.3.1.1	Message Type
The Message Type IE uniquely identifies the message being sent. It is mandatory for all messages.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Message Type




>Procedure Code
M

INTEGER (0..255)

>Type of Message
M

CHOICE (Initiating Message, Successful Outcome, Unsuccessful Outcome, ...)


9.3.1.2	Cause
The purpose of the Cause IE is to indicate the reason for a particular event for the F1AP protocol.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE Cause Group
M



>Radio Network Layer




>>Radio Network Layer Cause 
M

ENUMERATED
(Unspecified, RL failure-RLC, Unknown or already allocated gNB-CU UE F1AP ID, 
Unknown or already allocated gNB-DU UE F1AP ID, 
Unknown or inconsistent pair of UE F1AP ID, 
Interaction with other procedure, 
Not supported QCI Value, 
Action Desirable for Radio Reasons, 
No Radio Resources Available, 
Procedure cancelled, Normal Release, ..., Cell not available, RL failure-others, UE rejection, Resources not available for the slice(s), AMF initiated abnormal release, Release due to Pre-Emption, PLMN not served by the gNB-CU, Multiple DRB ID Instances, Unknown DRB ID, Multiple BH RLC CH ID Instances, Unknown BH RLC CH ID, CHO-CPC resources to be changed, NPN not supported, NPN access denied, gNB-CU Cell Capacity Exceeded, Report Characteristics Empty, Existing Measurement ID, Measurement Temporarily not Available, Measurement not Supported For The Object, Unknown BAP address, Unknown BAP routing ID, Insufficient UE Capabilities)

>Transport Layer




>>Transport Layer Cause
M

ENUMERATED
(Unspecified, Transport Resource Unavailable, ... , Unknown TNL address for IAB, Unknown UP TNL information for IAB)

>Protocol




>>Protocol Cause
M

ENUMERATED
(Transfer Syntax Error,
Abstract Syntax Error (Reject),
Abstract Syntax Error (Ignore and Notify),
Message not Compatible with Receiver State,
Semantic Error,
Abstract Syntax Error (Falsely Constructed Message), Unspecified, ...)

>Misc




>>Miscellaneous Cause
M

ENUMERATED
(Control Processing Overload, Not enough User Plane Processing Resources,
Hardware Failure,
O&M Intervention,
Unspecified, ...)


The meaning of the different cause values is described in the following table. In general, "not supported" cause values indicate that the related capability is missing. On the other hand, "not available" cause values indicate that the related capability is present, but insufficient resources were available to perform the requested action.
Radio Network Layer cause
Meaning
Unspecified
Sent for radio network layer cause when none of the specified cause values applies.
RL Failure-RLC
The action is due to an RL failure caused by exceeding the maximum number of ARQ retransmissions.
Unknown or already allocated gNB-CU UE F1AP ID
The action failed because the gNB-CU UE F1AP ID is either unknown, or (for a first message received at the gNB-CU) is known and already allocated to an existing context.
Unknown or already allocated gNB-DU UE F1AP ID
The action failed because the gNB-DU UE F1AP ID is either unknown, or (for a first message received at the gNB-DU) is known and already allocated to an existing context.
Unknown or inconsistent pair of UE F1AP ID
The action failed because both UE F1AP IDs are unknown, or are known but do not define a single UE context.
Interaction with other procedure
The action is due to an ongoing interaction with another procedure.
Not supported QCI Value
The action failed because the requested QCI is not supported.
Action Desirable for Radio Reasons
The reason for requesting the action is radio related.
No Radio Resources Available
The cell(s) in the requested node don’t have sufficient radio resources available.
Procedure cancelled
The sending node cancelled the procedure due to other urgent actions to be performed.
Normal Release
The action is due to a normal release of the UE (e.g. because of mobility) and does not indicate an error.
Cell Not Available
The action failed due to no cell available in the requested node.
RL Failure-others
The action is due to an RL failure caused by other radio link failures than exceeding the maximum number of ARQ retransmissions.
UE rejection
The action is due to gNB-CU’s rejection of a UE access request.
Resources not available for the slice(s)
The requested resources are not available for the slice(s).
AMF initiated abnormal release
The release is triggered by an error in the AMF or in the NAS layer.
Release due to Pre-Emption
Release is initiated due to pre-emption.
PLMN not served by the gNB-CU
The PLMN indicated by the UE is not served by the gNB-CU.
Multiple DRB ID Instances
The action failed because multiple instances of the same DRB had been provided.
Unknown DRB ID
The action failed because the DRB ID is unknow.
Multiple BH RLC CH ID Instances
The action failed because multiple instances of the same BH RLC CH ID had been provided. This cause value is only applicable to IAB.
Unknown BH RLC CH ID
The action failed because the BH RLC CH ID is unknown. This cause value is only applicable to IAB.
CHO-CPC resources to be changed
The gNB-DU requires gNB-CU to replace, i.e. overwrite the configuration of indicated candidate target cell.
NPN not supported
The action fails because the indicated SNPN is not supported in the node.
NPN access denied
The action is due to rejection of a UE access request for NPN.
gNB-CU Cell Capacity Exceeded
The number of cells requested to be added was exceeding maximum cell capacity in the gNB-CU.
Report Characteristics Empty
The action failed because there is no measurement object in the report characteristics.
Existing Measurement ID
The action failed because the measurement ID is already used.
Measurement Temporarily not Available
The gNB-DU can temporarily not provide the requested measurement object.
Measurement not Supported For The Object
At least one of the concerned object(s) does not support the requested measurement.
Unknown BAP address
The action failed because the BAP address is unknown. This cause value is only applicable to IAB.
Unknown BAP routing ID
The action failed because the BAP routing ID is unknown. This cause value is only applicable to IAB.
Insufficient UE Capabilities
The setup can’t proceed due to insufficient UE capabilities.

Transport Layer cause
Meaning
Unspecified
Sent when none of the above cause values applies but still the cause is Transport Network Layer related.
Transport Resource Unavailable
The required transport resources are not available.
Unknown TNL address for IAB
The action failed because the TNL address is unknown. This cause value is only applicable to IAB.
Unknown UP TNL information for IAB
The action failed because the UP TNL information is unknown. This cause value is only applicable to IAB.

Protocol cause
Meaning
Transfer Syntax Error
The received message included a transfer syntax error.
Abstract Syntax Error (Reject)
The received message included an abstract syntax error and the concerning criticality indicated "reject".
Abstract Syntax Error (Ignore And Notify)
The received message included an abstract syntax error and the concerning criticality indicated "ignore and notify".
Message Not Compatible With Receiver State
The received message was not compatible with the receiver state.
Semantic Error
The received message included a semantic error.
Abstract Syntax Error (Falsely Constructed Message)
The received message contained IEs or IE groups in wrong order or with too many occurrences.
Unspecified
Sent when none of the above cause values applies but still the cause is Protocol related.

Miscellaneous cause
Meaning
Control Processing Overload
Control processing overload.
Not Enough User Plane Processing Resources Available
No enough resources are available related to user plane processing.
Hardware Failure
Action related to hardware failure.
O&M Intervention
The action is due to O&M intervention.
Unspecified Failure
Sent when none of the above cause values applies and the cause is not related to any of the categories Radio Network Layer, Transport Network Layer or Protocol.

9.3.1.3	Criticality Diagnostics
The Criticality Diagnostics IE is sent by the gNB-DU or the gNB-CU when parts of a received message have not been comprehended or were missing, or if the message contained logical errors. When applicable, it contains information about which IEs were not comprehended or were missing.
For further details on how to use the Criticality Diagnostics IE, (see clause 10). The conditions for inclusion of the Transaction ID IE are described in clause 10.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Procedure Code
O

INTEGER (0..255)
Procedure Code is to be used if Criticality Diagnostics is part of Error Indication procedure, and not within the response message of the same procedure that caused the error.
Triggering Message
O

ENUMERATED(initiating message, successful outcome, unsuccessful outcome)
The Triggering Message is used only if the Criticality Diagnostics is part of Error Indication procedure.
Procedure Criticality
O

ENUMERATED(reject, ignore, notify)
This Procedure Criticality is used for reporting the Criticality of the Triggering message (Procedure).
Transaction ID
O

9.3.1.23

Information Element Criticality Diagnostics

0 .. <maxnoof Errors>


>IE Criticality
M

ENUMERATED(reject, ignore, notify)
The IE Criticality is used for reporting the criticality of the triggering IE. The value 'ignore' is not applicable.
>IE ID
M

INTEGER (0..65535)
The IE ID of the not understood or missing IE.
>Type of Error
M

ENUMERATED(not understood, missing, ...)


Range bound
Explanation
maxnoofErrors
Maximum no. of IE errors allowed to be reported with a single message. The value for maxnoofErrors is 256.


9.3.1.4	gNB-CU UE F1AP ID
The gNB-CU UE F1AP ID uniquely identifies the UE association over the F1 interface within the gNB-CU.
NOTE: 	If F1-C signalling transport is shared among multiple interface instances, the value of the gNB-CU UE F1AP ID is allocated so that it can be associated with the corresponding F1-C interface instance.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
gNB-CU UE F1AP ID
M

INTEGER (0 .. 232 -1)


9.3.1.5	gNB-DU UE F1AP ID
The gNB-DU UE F1AP ID uniquely identifies the UE association over the F1 interface within the gNB-DU.
NOTE: 	If F1-C signalling transport is shared among multiple interface instances, the value of the gNB-CU UE F1AP ID is allocated so that it can be associated with the corresponding F1-C interface instance.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
gNB-DU UE F1AP ID
M

INTEGER (0 .. 232 -1)


9.3.1.6	RRC-Container
This information element contains a gNB-CUUE or a UE  gNB-CU message that is transferred without interpretation in the gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
RRC-Container
M

OCTET STRING


9.3.1.7	SRB ID
This IE uniquely identifies a SRB for a UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
SRB ID
M

INTEGER (0..3, ...)
Corresponds to the identities of SRB as defined in TS 38.331 [8]. Value 0 indicates SRB0, value 1 indicates SRB1, etc.

9.3.1.8	DRB ID
This IE uniquely identifies a DRB for a UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
DRB ID
M

INTEGER (1.. 32, ...)
Corresponds to the DRB-Identity defined in TS 38.331 [8].

9.3.1.9	gNB-DU ID
The gNB-DU ID uniquely identifies the gNB-DU at least within a gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
gNB-DU ID
M

INTEGER (0 .. 236-1)
The gNB-DU ID is independently configured from cell identifiers, i.e. no connection between gNB-DU ID and cell identifiers.

9.3.1.10	Served Cell Information
This IE contains cell configuration information of a cell in the gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
NR CGI
M

9.3.1.12

-

NR PCI
M

INTEGER (0..1007)
Physical Cell ID
-

5GS TAC
O

9.3.1.29
5GS Tracking Area Code
-

Configured EPS TAC
O

9.3.1.29a

-

Served PLMNs

1..<maxnoofBPLMNs>

Broadcast PLMNs in SIB 1 associated to the NR Cell Identity in the NR CGI IE
-

>PLMN Identity
M

9.3.1.14

-

>TAI Slice Support List
O

Slice Support List
9.3.1.37
Supported S-NSSAIs per PLMN or per SNPN. 
YES
ignore
>NPN Support Information
O

9.3.1.156
Supported NPNs per PLMN.
YES
reject
>Extended TAI Slice Support List
O

Extended Slice Support List
9.3.1.165
Additional Supported S-NSSAIs per PLMN or per SNPN. 
YES
reject
CHOICE NR-Mode-Info 
M



-

>FDD




-

>>FDD Info

1


-

>>>UL FreqInfo
M

NR Frequency Info
9.3.1.17
This IE is ignored if the Cell Direction IE is included and set to “dl-only”.
-

>>>DL FreqInfo
M

NR Frequency Info
9.3.1.17
This IE is ignored if the Cell Direction IE is included and set to “ul-only”.
-

>>>UL Transmission Bandwidth
M

Transmission Bandwidth
9.3.1.15
This IE is ignored if the Cell Direction IE is included and set to “dl-only”.
-

>>>DL Transmission Bandwidth
M

Transmission Bandwidth
9.3.1.15
This IE is ignored if the Cell Direction IE is included and set to “ul-only”.
-

>>>UL Carrier List 
O

NR Carrier List
9.3.1.137
If included, the UL Transmission Bandwidth IE shall be ignored.
YES
ignore
>>>DL Carrier List
O

NR Carrier List
9.3.1.137
If included, the DL Transmission Bandwidth IE shall be ignored.
YES
ignore
>TDD




-

>>TDD Info

1


-

>>>NR FreqInfo
M

NR Frequency Info
9.3.1.17

-

>>>Transmission Bandwidth
M

Transmission Bandwidth
9.3.1.15

-

>>>Intended TDD DL-UL Configuration
O

9.3.1.89

 YES
ignore
>>>TDD UL-DL Configuration Common NR
O

OCTET STRING
The tdd-UL-DL-ConfigurationCommon as defined in TS 38.331 [8]
YES
ignore
>>>Carrier List
O

NR Carrier List
9.3.1.137
If included, the Transmission Bandwidth IE shall be ignored.
YES
ignore
Measurement Timing Configuration
M

OCTET STRING
Contains the MeasurementTimingConfiguration inter-node message defined in TS 38.331 [8].
-

RANAC
O

RAN Area Code
9.3.1.57

YES
ignore
Extended Served PLMNs List

0..1

This is included if more than 6 Served PLMNs is to be signalled.
YES
ignore
>Extended Served PLMNs Item

1 ..<maxnoofExtendedBPLMNs>


-

>>PLMN Identity
M

9.3.1.14

-

>>TAI Slice Support List
O

Slice Support List
9.3.1.37
Supported S-NSSAIs per PLMN or per SNPN. 
-

>>NPN Support Information
O

9.3.1.156
Supported NPNs per PLMN.
YES
reject
>>Extended TAI Slice Support List
O

Extended Slice Support List
9.3.1.165
Additional Supported S-NSSAIs per PLMN or per SNPN. 
YES
reject
Cell Direction
O

9.3.1.78

YES
ignore
Cell Type 
O

9.3.1.87

YES
ignore
Broadcast PLMN Identity Info List

0..<maxnoofBPLMNsNR>

This IE corresponds to the PLMN-IdentityInfoList IE and the NPN-IdentityInfoList IE (if available) in SIB1 as specified in TS 38.331 [8]. All PLMN Identities and associated information contained in the PLMN-IdentityInfoList IE and NPN identities and associated information contained in the NPN-IdentityInfoList IE (if available) are included and provided in the same order as broadcast in SIB1.
NOTE: In case of NPN-only cell, the PLMN Identities and associated information contained in the PLMN-IdentityInfoList IE are not included.
YES
ignore
>PLMN Identity List
M

Available PLMN List
9.3.1.65
Broadcast PLMN IDs in SIB1 associated to the NR Cell Identity IE
-

>Extended PLMN Identity List
O

Extended Available PLMN List
9.3.1.76

-

>5GS-TAC
O

OCTET STRING (3)

-

>NR Cell Identity
M

BIT STRING (36)

-

>RANAC
O

RAN Area Code
9.3.1.57

-

>Configured TAC Indication
O

9.3.1.87a
NOTE: This IE is associated with the 5GS TAC in the Broadcast PLMN Identity Info List IE
YES
ignore
>NPN Broadcast Information
O

9.3.1.157
If this IE is included the content of the PLMN Identity List IE and Extended PLMN Identity List IE if present in the Broadcast PLMN Identity Info List IE is ignored.
YES
reject
Configured TAC Indication
O

9.3.1.87a
NOTE: This IE is associated with the 5GS TAC on top-level of the Served Cell Information IE
YES
ignore
Aggressor gNB Set ID
O

9.3.1.93
This IE indicates the associated aggressor gNB Set ID of the cell
YES
ignore
Victim gNB Set ID
O

9.3.1.93
This IE indicates the associated Victim gNB Set ID of the cell
YES
ignore
IAB Info IAB-DU
O

9.3.1.106

YES
ignore
SSB Positions In Burst 
O

9.3.1.138

YES
ignore
NR PRACH Configuration
O

9.3.1.139

YES
ignore
SFN Offset
O

9.3.1.208

YES
ignore
NPN Broadcast Information
O

9.3.1.157

YES
reject

Range bound
Explanation
maxnoofBPLMNs
Maximum no. of Broadcast PLMN Ids. Value is 6.
maxnoofExtendedBPLMNs
Maximum no. of Extended Broadcast PLMN Ids. Value is 6.
maxnoofBPLMNsNR
Maximum no. of PLMN Ids.broadcast in an NR cell. Value is 12.

9.3.1.11	Transmission Action Indicator
This IE indicates actions for the gNB-DU for the data transmission to the UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Transmission Action Indicator
M

ENUMERATED
(stop, ..., restart)


9.3.1.12	NR CGI
The NR Cell Global Identifier (NR CGI) is used to globally identify a cell.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
PLMN Identity
M

9.3.1.14
 
NR Cell Identity
M

BIT STRING (SIZE(36))


9.3.1.13	Time To wait
This IE defines the minimum allowed waiting times.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Time to wait
M

ENUMERATED(1s, 2s, 5s, 10s, 20s, 60s)


9.3.1.14	PLMN Identity
This information element indicates the PLMN Identity.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
PLMN Identity
M

OCTET STRING (SIZE(3))
- digits 0 to 9, encoded 0000 to 1001,
- 1111 used as filler digit,
two digits per octet,
- bits 4 to 1 of octet n encoding digit 2n-1
- bits 8 to 5 of octet n encoding digit 2n

-The PLMN identity consists of 3 digits from MCC followed by either 
-a filler digit plus 2 digits from MNC (in case of 2 digit MNC) or 
-3 digits from MNC (in case of a 3 digit MNC).

9.3.1.15	Transmission Bandwidth
The Transmission Bandwidth IE is used to indicate the UL or DL transmission bandwidth. 
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
NR SCS
M

ENUMERATED (scs15, scs30, scs60, scs120, ...)
The values scs15, scs30, scs60 and scs120 corresponds to the sub carrier spacing in TS 38.104 [17].
NRB
M

ENUMERATED (nrb11, nrb18, nrb24, nrb25, nrb31, nrb32, nrb38, nrb51, nrb52, nrb65, nrb66, nrb78, nrb79, nrb93, nrb106, nrb107, nrb121, nrb132, nrb133, nrb135, nrb160, nrb162, nrb189, nrb216, nrb217, nrb245, nrb264, nrb270, nrb273, ...)
This IE is used to indicate the UL or DL transmission bandwidth expressed in units of resource blocks "NRB" (TS 38.104 [17]). The values nrb11, nrb18, etc. correspond to the number of resource blocks "NRB" 11, 18, etc.

9.3.1.16	Void
Reserved for future use.
9.3.1.17	NR Frequency Info
The NR Frequency Info defines the carrier frequency used in a cell for a given direction (UL or DL) in FDD or for both UL and DL directions in TDD or for an SUL carrier.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Criticality
Assigned Criticality
NR ARFCN
M

INTEGER (0.. maxNRARFCN)
RF Reference Frequency as defined in TS 38.104 [17] section 5.4.2.1. The frequency provided in this IE identifies the absolute frequency position of the reference resource block (Common RB 0) of the carrier. Its lowest subcarrier is also known as Point A.
–

SUL Information
O

9.3.1.28

–

Frequency Band List

1


–

>Frequency Band Item

1..<maxnoofNrCellBands>


–

>>NR Frequency Band 
M

INTEGER (1.. 1024, ...)
Operating Band as defined in TS 38.104 [17] section 5.4.2.3.
The value 1 corresponds to NR operating band n1, value 2 corresponds to NR operating band n2, etc.
–

>>Supported SUL band List

0..<maxnoofNrCellBands>


–

>>>Supported SUL band Item
M

INTEGER (1.. 1024, ...)
Supplementary NR Operating Band as defined in TS 38.104 [17] section 5.4.2.3 that can be used for SUL duplex mode as per TS 38.101-1 [26] table 5.2.-1.
The value 80 corresponds to NR operating band n80, value 81 corresponds to NR operating band n81, etc.
–

Frequency Shift 7p5khz 
O

ENUMERATED (false, true, ...)
Indicate whether the value of Δshift is 0kHz or 7.5kHz when calculating FREF,shift as defined in Section 5.4.2.1 of TS 38.104 [17].
YES
ignore

Range bound
Explanation
maxNRARFCN
Maximum value of NR ARFCNs. Value is 3279165.
maxnoofNrCellBands
Maximum no. of frequency bands supported for a NR cell. Value is 32.

9.3.1.18	gNB-DU System Information
This IE contains the system information generated by the gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
MIB message
M

OCTET STRING
MIB message, as defined in subclause 6.2.2 in TS 38.331 [8].

-

SIB1 message
M

OCTET STRING
SIB1 message, as defined in subclause 6.2.2 in TS 38.331 [8].

-

SIB12 message
O

OCTET STRING
SIB12, as defined in subclause 6.2.2 in TS 38.331 [8].
YES
Ignore
SIB13 message
O

OCTET STRING
SIB13, as defined in subclause 6.3.1 in TS 38.331 [8].
YES
Ignore
SIB14 message
O

OCTET STRING
SIB14, as defined in subclause 6.3.1 in TS 38.331 [8].
YES
ignore
SIB10 message
O

OCTET STRING
SIB10, as defined in subclause 6.3.1 in TS 38.331 [8].
YES
ignore

9.3.1.19	E-UTRAN QoS
This IE defines the QoS to be applied to a DRB or to a BH RLC channel for EN-DC case.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
QCI
M

INTEGER (0..255)
QoS Class Identifier defined in TS 23.401 [10].
Logical range and coding specified in TS 23.203 [11]. For a BH RLC channel, the Packet Delay Budget included in QCI defines the upper bound for the time that a packet may be delayed between the gNB-DU and its child IAB-MT.


Allocation and Retention Priority
M 

9.3.1.20



GBR QoS Information
O

9.3.1.21
This IE shall be present for GBR bearers only and is ignored otherwise.


ENB DL Transport Layer Address
O

Transport Layer Address
9.3.2.3
DL Transport Layer Address of node terminating PDCP. Included for MN-terminated SCG bearers.
YES
ignore

9.3.1.20	Allocation and Retention Priority
This IE specifies the relative importance compared to other E-RABs for allocation and retention of the E-UTRAN Radio Access Bearer.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Priority Level
M

INTEGER (0..15)
Desc.: This IE should be understood as "priority of allocation and retention" (see TS 23.401 [10]).
Usage:
Value 15 means "no priority".
Values between 1 and 14 are ordered in decreasing order of priority, i.e. 1 is the highest and 14 the lowest.
Value 0 shall be treated as a logical error if received.
Pre-emption Capability
M

ENUMERATED(shall not trigger pre-emption, may trigger pre-emption)
Desc.: This IE indicates the pre-emption capability of the request on other E-RABs (see TS 23.401 [10]).
Usage: 
The E-RAB shall not pre-empt other E-RABs or, the E-RAB may pre-empt other E-RABs
The Pre-emption Capability indicator applies to the allocation of resources for an E-RAB and as such it provides the trigger to the pre-emption procedures/processes of the eNB.
Pre-emption Vulnerability
M

ENUMERATED(not pre-emptable, pre-emptable)
Desc.: This IE indicates the vulnerability of the E-RAB to pre-emption of other E-RABs (see TS 23.401 [10]).
Usage:
The E-RAB shall not be pre-empted by other E-RABs or the E-RAB may be pre-empted by other RABs.
Pre-emption Vulnerability indicator applies for the entire duration of the E-RAB, unless modified, and as such indicates whether the E-RAB is a target of the pre-emption procedures/processes of the eNB.

9.3.1.21	GBR QoS Information
This IE indicates the maximum and guaranteed bit rates of a GBR E-RAB for downlink and uplink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
E-RAB Maximum Bit Rate Downlink
M

Bit Rate
9.3.1.22
Maximum Bit Rate in DL (i.e. from EPC to E-UTRAN) for the bearer.
Details in TS 23.401 [10].
E-RAB Maximum Bit Rate Uplink
M

Bit Rate 
9.3.1.22
Maximum Bit Rate in UL (i.e. from E-UTRAN to EPC) for the bearer.
Details in TS 23.401 [10].
E-RAB Guaranteed Bit Rate Downlink
M

Bit Rate 
9.3.1.22
Guaranteed Bit Rate (provided that there is data to deliver) in DL (i.e. from EPC to E-UTRAN) for the bearer.
Details in TS 23.401 [10].
E-RAB Guaranteed Bit Rate Uplink
M

Bit Rate 
9.3.1.22
Guaranteed Bit Rate (provided that there is data to deliver) in UL (i.e. from E-UTRAN to EPC) for the bearer.
Details in TS 23.401 [10].

9.3.1.22	Bit Rate
This IE indicates the number of bits delivered by NG-RAN in UL or to NG-RAN in DL within a period of time, divided by the duration of the period. It is used, for example, to indicate the maximum or guaranteed bit rate for a GBR QoS flow, or an aggregated maximum bit rate.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Bit Rate
M

INTEGER (0.. 4,000,000,000,000,...)
The unit is: bit/s

9.3.1.23	Transaction ID
The Transaction ID IE uniquely identifies a procedure among all ongoing parallel procedures of the same type initiated by the same protocol peer. Messages belonging to the same procedure use the same Transaction ID. The Transaction ID is determined by the initiating peer of a procedure.
NOTE:	If F1-C signalling transport is shared among multiple interface instances, the Transaction ID is allocated so that it can be associated with an F1-C interface instance. The Transaction ID may identify more than one interface instance.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Transaction ID
M

INTEGER (0..255, ...)


9.3.1.24	DRX Cycle
The DRX Cycle IE is to indicate the desired DRX cycle.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Long DRX Cycle Length
M

ENUMERATED
(ms10, ms20, ms32, ms40, ms60, ms64, ms70, ms80, ms128, ms160, ms256, ms320, ms512, ms640, ms1024, ms1280, ms2048, ms2560, ms5120, ms10240, ...)
This IE is defined in TS 38.331 [8]
Short DRX Cycle Length
O

ENUMERATED (ms2, ms3, ms4, ms5, ms6, ms7, ms8, ms10, ms14, ms16, ms20, ms30, ms32, ms35, ms40, ms64, ms80, ms128, ms160, ms256, ms320, ms512, ms640, ...)
This IE is defined in TS 38.331 [8]
Short DRX Cycle Timer
O

INTEGER (1..16)
This IE is defined in TS 38.331 [8]

9.3.1.25	CU to DU RRC Information
This IE contains the RRC Information that are sent from gNB-CU to gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
CG-ConfigInfo
O

OCTET STRING
CG-ConfigInfo, as defined in TS 38.331 [8].
-

UE-CapabilityRAT-ContainerList
O

OCTET STRING
This IE is used in the NG-RAN and it consists of the UE-CapabilityRAT-ContainerList, as defined in TS 38.331 [8].
-

MeasConfig 
O

OCTET STRING
MeasConfig, as defined in TS 38.331 [8] (without MeasGapConfig). 
For EN-DC/NGEN-DC operation, includes the list of FR2 frequencies for which the gNB-CU requests the gNB-DU to generate gaps.
For NG-RAN,NE-DC and MN for NR-NR DC, includes the list of FR1 and/or FR2 frequencies for which the gNB-CU requests the gNB-DU to generate gaps and the gap type (per-UE or per-FR).
-

Handover Preparation Information
O

OCTET STRING
HandoverPreparationInformation, as defined in TS 38.331 [8].
YES
ignore
CellGroupConfig
O

OCTET STRING
CellGroupConfig, as defined in TS 38.331 [8].
YES
ignore
Measurement Timing Configuration
O

OCTET STRING
Contains the MeasurementTimingConfiguration inter-node message defined in TS 38.331 [8].
In EN-DC/NGEN-DC, it is included when the gaps for FR2 are requested to be configured by the MeNB. For MN in NR-NR DC,it is included when the gaps for FR2 and/or FR1 are requested by the SgNB
YES
ignore
UEAssistanceInformation
O

OCTET STRING
UEAssistanceInformation, as defined in TS 38.331 [8]. 
YES
ignore
CG-Config
O

OCTET STRING
CG-Config, as defined in TS 38.331 [8].
YES
ignore
UEAssistanceInformationEUTRA
O

OCTET STRING
UEAssistanceInformation, as defined in TS  36.331 [41].
YES
ignore
Location Measurement Information
O

OCTET STRING
LocationMeasurementInfo, as defined in TS 38.331[8] 
YES
ignore

9.3.1.26	DU to CU RRC Information
This IE contains the RRC Information that are sent from the gNB-DU to the gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
CellGroupConfig
M

OCTET STRING
CellGroupConfig, as defined in TS 38.331 [8].


MeasGapConfig
O

OCTET STRING
MeasGapConfig as defined in TS 38.331 [8].
For EN-DC/NGEN-DC operation, includes the gap for FR2, as requested by the gNB-CU via MeasConfig IE. 

For NG-RAN,NE-DC and MN for NR-NR DC, includes the gap(s) for FR1 and/or FR2, as requested by the gNB-CU via MeasConfig IE and according to the requested gap type (per-UE or per-FR).


Requested P-MaxFR1
O

OCTET STRING
requestedP-MaxFR1, as defined in TS 38.331 [8]. 
For EN-DC,  NGEN-DC and NR-DC operation, this IE should be included.


DRX Long Cycle Start Offset
O

INTEGER (0..10239)
Identical to the value of the drx-LongCycleStartOffset IE within the DRX-Config as defined in TS 38.331 [8].
This field is not used in NR-DC.


Selected BandCombinationIndex
O

OCTET STRING
BandCombinationIndex, as defined in TS 38.331 [8]. 
For (NG)EN-DC and NR DC operation, this IE should be included so that gNB-CU is informed of the selected Band Combination; if this IE is included, the gNB-CU uses this information to deduce the selected band.
YES
ignore
Selected FeatureSetEntryIndex
O

OCTET STRING
FeatureSetEntryIndex, as defined in TS 38.331 [8]. 
For (NG)EN-DC and NR DC operation, this IE should be included so that gNB-CU is informed of the selected FeatureSet.
YES
ignore
Ph-InfoSCG
O

OCTET STRING
PH-TypeListSCG, as defined in TS 38.331 [8].For MR-DC, this IE should be included so that gNB-CU is informed of the Power Headroom type for each serving cell in SN.
Yes
ignore
Requested BandCombinationIndex
O

OCTET STRING
BandCombinationIndex, as defined in TS 38.331 [8]. 
This IE is used for the gNB-DU to request a new Band Combination.
YES
ignore
Requested FeatureSetEntryIndex
O

OCTET STRING
FeatureSetEntryIndex, as defined in TS 38.331 [8]. 
This IE is used for the gNB-DU to request a new Feature Set.
YES
ignore
DRX Config
O

OCTET STRING
DRX-Config, as defined in TS 38.331 [8].
This field is only used in NR-DC.
YES
ignore
PDCCH BlindDetectionSCG
O

OCTET STRING
pdcch-BlindDetectionSCG, as defined in TS 38.331 [8]. This IE is used between the MgNB-DU and the MgNB-CU.
YES
ignore
Requested PDCCH BlindDetectionSCG
O

OCTET STRING
requestedPDCCH-BlindDetectionSCG, as defined in TS 38.331 [8]. This IE is used between the SgNB-DU and the SgNB-CU.
YES
ignore
Ph-InfoMCG
O

OCTET STRING
PH-TypeListMCG, as defined in TS 38.331 [8]. For MR-DC, this IE should be included so that gNB-CU is informed of the Power Headroom type for each serving cell in MCG.
YES
ignore
MeasGapSharingConfig
O

OCTET STRING
MeasGapSharingConfig as defined in TS 38.331 [8].
YES
ignore
SL-PHY-MAC-RLC-Config
O

OCTET STRING
SL-PHY-MAC-RLC-Config as defined in TS 38.331 [8].
YES
ignore
SL-ConfigDedicatedEUTRA-Info
O

OCTET STRING
SL-ConfigDedicatedEUTRA-Info as defined in TS 38.331 [8].
YES
ignore
Requested P-MaxFR2
O

OCTET STRING
RequestedP-MaxFR2, as defined in TS 38.331 [8]. 
For NR-DC operation, this IE should be included.
YES
ignore

9.3.1.27	RLC Mode
The RLC Mode IE indicates the RLC Mode used for a DRB or a BH RLC channel.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
RLC Mode


ENUMERATED (
RLC-AM, RLC-UM-Bidirectional, RLC-UM-Unidirectional-UL, RLC-UM-Unidirectional-DL, ...)


9.3.1.28	SUL Information
This IE provides information about the SUL carrier.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
SUL ARFCN
M

INTEGER (0.. maxNRARFCN)
RF Reference Frequency as defined in TS 38.104 [17] section 5.4.2.1. The frequency provided in this IE identifies the absolute frequency position of the reference resource block (Common RB 0) of the SUL carrier. Its lowest subcarrier is also known as Point A.
–

SUL Transmission Bandwidth
M

Transmission Bandwidth
9.3.1.15

–

Carrier List 
O

NR Carrier List
9.3.1.137
If included, the SUL Transmission Bandwidth IE shall be ignored.
YES
ignore
Frequency Shift 7p5khz 
O

ENUMERATED (false, true, ...)
Indicate whether the value of Δshift is 0kHz or 7.5kHz when calculating FREF,shift as defined in Section 5.4.2.1 of TS 38.104 [17].
YES
ignore

Range bound
Explanation
maxNRARFCN
Maximum value of NR ARFCNs. Value is 3279165.

9.3.1.29	5GS TAC
This information element is used to identify Tracking Area Code.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
5GS TAC
M

OCTET STRING (SIZE (3))


9.3.1.29a	Configured EPS TAC
This information element is used to identify a configured EPS Tracking Area Code in order to enable application of Roaming and Access Restrictions for EN-DC as specified in TS 37.340 [7]. This IE is configured for the cell, but not broadcast.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Configured EPS TAC
M

OCTET STRING (SIZE (2))


9.3.1.30	RRC Reconfiguration Complete Indicator
This IE indicates the result of the reconfiguration performed towards the UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
RRC Reconfiguration Complete Indicator
M 

ENUMERATED (true, ... , failure) 


9.3.1.31	UL Configuration
This IE indicates how the UL scheduling is configured at gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
UL UE Configuration 
M

ENUMERATED (no-data, shared, only, ...)
Indicates how the UE uses the UL at gNB-DU, for which "no-data" indicates that the UL scheduling is not performed at gNB-DU, "shared" indicates that the UL scheduling is performed at both gNB-DU and another node, and "only" indicates that the UL scheduling is only performed at the gNB-DU.

9.3.1.32	C-RNTI
This IE contains the C-RNTI information.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
C-RNTI
M

INTEGER (0..65535, ...)
C-RNTI as defined in TS 38.331 [8].

9.3.1.33	Cell UL Configured
This IE indicates whether the gNB-CU requests the gNB-DU to configure the uplink as no UL, UL, SUL or UL+SUL for the indicated cell for the UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Cell UL Configured
M 

ENUMERATED (none, UL, SUL, UL and SUL, ...) 
Further details are defined in TS 38.331 [8]

9.3.1.34	RAT-Frequency Priority Information
The RAT-Frequency Priority Information contains either the Subscriber Profile ID for RAT/Frequency priority IE or the Index to RAT/Frequency Selection Priority IE. These parameters are used to define local configuration for RRM strategies.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE RAT-Frequency Priority Information
M



>EN-DC




>>Subscriber Profile ID for RAT/Frequency priority
M

INTEGER (1.. 256, ...)

>NG-RAN




>> Index to RAT/Frequency Selection Priority
M

INTEGER (1.. 256, ...)


9.3.1.35	LCID
This IE uniquely identifies a LCID for the associated SRB or DRB.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
LCID
M

INTEGER (1..32, ...)
Corresponds to the LogicalChannelIdentity defined in TS 38.331 [8].

9.3.1.36	Duplication activation
The Duplication Activation IE indicates whether UL PDCP Duplication is activated or not.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Duplication Activation
M

ENUMERATED (
Active, Inactive, ...) 


9.3.1.37	Slice Support List
This IE indicates the list of supported slices.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Slice Support Item IEs

1..<maxnoofSliceItems>


>S-NSSAI
M

9.3.1.38


Range bound
Explanation
maxnoofSliceItems
Maximum no. of signalled slice support items. Value is 1024.

9.3.1.38	S-NSSAI
This IE indicates the S-NSSAI as defined in TS 23.003 [23].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
SST
M

OCTET STRING (SIZE(1))

SD
O

OCTET STRING (SIZE(3))


9.3.1.39	UE Identity Index value
This IE is used by the gNB-DU to calculate the Paging Frame.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE UE Identity Index Value
M



>Length-10




>>Index Length 10
M

BIT STRING (SIZE(10))
Coded as specified in TS 38.304 [24].

9.3.1.40	Paging DRX 
This IE indicates the Paging DRX as defined in TS 38.304 [24].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Paging DRX
M

ENUMERATED(32, 64, 128, 256, ...)
Unit in radio frame.

9.3.1.41	Paging Priority
This IE indicates the paging priority for paging a UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Paging Priority
M

ENUMERATED (PrioLevel1, PrioLevel2, PrioLevel3, PrioLevel4, PrioLevel5, PrioLevel6, PrioLevel7, PrioLevel8, ...)
Lower value codepoint indicates higher priority.

9.3.1.42	gNB-CU System Information
This IE contains the system information encoded by the gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
SIB type to Be Updated List

1




>SIB type to Be Updated Item IEs

1... <maxnoofSIBTypes>




>>SIB type
M

INTEGER (2..32, ...)
Indicates a certain SIB block, e.g. 2 means sibType2, 3 for sibType3, etc. Values for SIBs generated by the gNB-DU as defined subclause 5.2.2 in TS 38.470 [2], values 6, 7, 8 and values corresponding to not defined SIBs in TS 38.331 are not applicable in this version of the specifications.


>>SIB message
M

OCTET STRING
SIB as defined in subclause 6.3.1 in TS 38.331 [8].


>>Value Tag
M

INTEGER (0..31, ...)



>>areaScope
O

ENUMERATED (true, …)
Indicates that a SIB is area specific. If the field is not present, the SIB is cell specific.
YES 
ignore
SystemInformationAreaID
O

BIT STRING (SIZE (24))
Indicates the system information area that the cell belongs to, if any.
YES
ignore

Range bound
Explanation
maxnoofSIBTypes
Maximum no. of SIB types, the maximum value is 32.

9.3.1.43	RAN UE Paging identity 
This IE indicates the RAN UE Paging identity.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
I-RNTI
M

BIT STRING (SIZE(40))


9.3.1.44	CN UE Paging Identity
The 5G-S-TMSI is used as UE identifier for CN paging.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE CN UE paging identity 
M



>5G-S-TMSI




>>5G-S-TMSI
M

BIT STRING (SIZE(48))
Details defined in TS 38.413 [3]

9.3.1.45	QoS Flow Level QoS Parameters
This IE defines the QoS to be applied to a QoS flow, to a DRB or to a BH RLC channel.
NOTE:	For a BH RLC channel, the listed mandatory IEs and the GBR QoS Flow Information IE are applicable, where GBR QoS Flow Information IE may be present if BH RLC channel conveys the traffic belonging to a GBR QoS Flow.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
CHOICE QoS Characteristics
M



-

>Non-dynamic 5QI




-

>>Non Dynamic 5QI Descriptor
M

9.3.1.49

-

>Dynamic 5QI




-

>>Dynamic 5QI Descriptor
M

9.3.1.47

-

NG-RAN Allocation and Retention Priority
M

9.3.1.48

-

GBR QoS Flow Information
O

9.3.1.46
This IE shall be present for GBR QoS Flows only and is ignored otherwise.
-

Reflective QoS Attribute
O

ENUMERATED (subject to, ...)
Details in TS 23.501 [21]. This IE applies to non-GBR flows only and is ignored otherwise.
-

PDU Session ID
O

INTEGER (0 ..255)
As specified in TS 23.501 [21].
YES
ignore
UL PDU Session Aggregate Maximum Bit Rate
O

Bit Rate
9.3.1.22
The PDU session Aggregate Maximum Bit Rate Uplink which is associated with the involved PDU session.
YES
ignore
QoS Monitoring Request
O

ENUMERATED (UL, DL, Both, …, stop)
Indicates to measure UL, or DL, or both UL/DL delays for the associated QoS flow or stop the corresponding QoS monitoring. 
YES
ignore
PDCP Terminating Node DL Transport Layer Address
O

Transport Layer Address
9.3.2.3
DL Transport Layer Address of node terminating PDCP. Included for MN-terminated SCG bearers and SN-terminated MCG bearers.
YES
ignore

9.3.1.46	GBR QoS Flow Information
This IE indicates QoS parameters for a GBR QoS flow or GBR bearer for downlink and uplink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Maximum Flow Bit Rate Downlink
M

Bit Rate
9.3.1.22
Maximum Bit Rate in DL. Details in TS 23.501 [21].
-

Maximum Flow Bit Rate Uplink
M

Bit Rate
9.3.1.22
Maximum Bit Rate in UL. Details in TS 23.501 [21].
-

Guaranteed Flow Bit Rate Downlink
M

Bit Rate
9.3.1.22
Guaranteed Bit Rate (provided there is data to deliver) in DL. Details in TS 23.501 [21].
-

Guaranteed Flow Bit Rate Uplink
M

Bit Rate
9.3.1.22
Guaranteed Bit Rate (provided there is data to deliver). Details in TS 23.501 [21].
-

Maximum Packet Loss Rate Downlink
O

Maximum Packet Loss Rate
9.3.1.50
Indicates the maximum rate for lost packets that can be tolerated in the downlink direction. Details in TS 23.501 [21].
-

Maximum Packet Loss Rate Uplink
O

Maximum Packet Loss Rate
9.3.1.50
Indicates the maximum rate for lost packets that can be tolerated in the uplink direction. Details in TS 23.501 [21].
-

Alternative QoS Parameters Set List
O

9.3.1.125
Indicates alternative sets of QoS Parameters for the QoS flow. 
YES
ignore

9.3.1.47	Dynamic 5QI Descriptor
This IE indicates the QoS Characteristics for a Non-standardised or not pre-configured 5QI for downlink and uplink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
QoS Priority Level
M

INTEGER (1..127)
For details see TS 23.501 [21].
-

Packet Delay Budget
M

9.3.1.51
For details see TS 23.501 [21]. For IAB, the Packet Delay Budget defines the upper bound for the time that a packet may be delayed between the IAB-DU/IAB-donor-DU and its child IAB-MT, or between the IAB-DU and its served UE. This IE is ignored if the Extended Packet Delay Budget IE is present.
-

Packet Error Rate
M

9.3.1.52
For details see TS 23.501 [21].
-

5QI
O

INTEGER (0..255,...)
This IE contains the dynamically assigned 5QI as specified in TS 23.501 [21].
-

Delay Critical
C-ifGBRflow

ENUMERATED (delay critical, non-delay critical)
For details see TS 23.501 [21].
-

Averaging Window
C-ifGBRflow 

9.3.1.53
For details see TS 23.501 [21].
-

Maximum Data Burst Volume
O

9.3.1.54
For details see TS 23.501 [21]. This IE shall be included if the Delay Critical IE is set to "delay critical" and is ignored otherwise.
-

Extended Packet Delay Budget
O

9.3.1.145
Packet Delay Budget is specified in TS 23.501 [21].
YES
ignore
CN Packet Delay Budget Downlink
O

Extended Packet Delay Budget
9.3.1.145
Core Network Packet Delay Budget is specified in TS 23.501 [21].
This IE may be present in case of GBR QoS flows and is ignored otherwise.
YES
ignore
CN Packet Delay Budget Uplink
O

Extended Packet Delay Budget
9.3.1.145
Core Network Packet Delay Budget is specified in TS 23.501 [21].
This IE may be present in case of GBR QoS flows and is ignored otherwise.
YES
ignore

Condition
Explanation
ifGBRflow
This IE shall be present if the GBR QoS Flow Information IE is present in the QoS Flow Level QoS Parameters IE.

9.3.1.48	NG-RAN Allocation and Retention Priority
This IE specifies the relative importance of a QoS flow or a DRB compared to other QoS flows or DRBs for allocation and retention of NG-RAN resources.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Priority Level
M

INTEGER (0..15)
Desc.: This IE defines the relative importance of a resource request (see TS 23.501 [21]).
Usage: Values are ordered in decreasing order of priority, i.e., with 1 as the highest priority and 15 as the lowest priority. Further usage is defined in TS 23.501 [21].
Pre-emption Capability
M

ENUMERATED (shall not trigger pre-emption, may trigger pre-emption)
Desc.: This IE indicates the pre-emption capability of the request on other QoS flows (see TS 23.501 [21]).
Usage: The QoS flow shall not pre-empt other QoS flows or, the QoS flow may pre-empt other QoS flows.
Note: The Pre-emption Capability indicator applies to the allocation of resources for a QoS flow and as such it provides the trigger to the pre-emption procedures/processes of the NG-RAN node.
Pre-emption Vulnerability
M

ENUMERATED (not pre-emptable, pre-emptable)
Desc.: This IE indicates the vulnerability of the QoS flow to pre-emption of other QoS flows (see TS 23.501 [21]).
Usage: The QoS flow shall not be pre-empted by other QoS flows or the QoS flow may be pre-empted by other QoS flows.
Note: The Pre-emption Vulnerability indicator applies for the entire duration of the QoS flow, unless modified and as such indicates whether the QoS flow is a target of the pre-emption procedures/processes of the NG-RAN node.

9.3.1.49	Non Dynamic 5QI Descriptor
This IE indicates the QoS Characteristics for a standardized or pre-configured 5QI for downlink and uplink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
5QI
M

INTEGER (0..255,...)
This IE contains the standardized or pre-configured 5QI as specified in TS 23.501 [21]. For a BH RLC channel, the Packet Delay Budget included in 5QI defines the upper bound for the time that a packet may be delayed between the gNB-DU and its child IAB-MT.
-

Priority Level
O

INTEGER (1..127)
For details see TS 23.501 [21]. When included overrides standardized or pre-configured value.
-

Averaging Window
O

9.3.1.53
For details see TS 23.501 [21]. When included overrides standardized or pre-configured value.
-

Maximum Data Burst Volume
O

9.3.1.54
For details see TS 23.501 [21]. When included overrides standardized or pre-configured value.
-

CN Packet Delay Budget Downlink
O

Extended Packet Delay Budget
9.3.1.145
Core Network Packet Delay Budget is specified in TS 23.501 [21].
This IE may be present in case of GBR QoS flows and is ignored otherwise.
YES
ignore
CN Packet Delay Budget Uplink
O

Extended Packet Delay Budget
9.3.1.145
Core Network Packet Delay Budget is specified in TS 23.501 [21].
This IE may be present in case of GBR QoS flows and is ignored otherwise.
YES
ignore

9.3.1.50	Maximum Packet Loss Rate
This IE indicates the Maximum Packet Loss Rate.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Maximum Packet Loss Rate
M

INTEGER(0..1000)
Ratio of lost packets per number of packets sent, expressed in tenth of percent.

9.3.1.51	Packet Delay Budget
This IE indicates the Packet Delay Budget for a QoS flow.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Packet Delay Budget
M

INTEGER (0..1023, ...)
Upper bound value for the delay that a packet may experience expressed in unit of 0.5ms.

9.3.1.52	Packet Error Rate
This IE indicates the Packet Error Rate for a QoS flow.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Scalar
M

INTEGER (0..9, ...)
The packet error rate is expressed as Scalar x 10-k where k is the Exponent.
Exponent
M

INTEGER (0..9, ...)


9.3.1.53	Averaging Window
This IE indicates the Averaging Window for a QoS flow, and applies to GBR QoS Flows only.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Averaging Window
M

INTEGER (0..4095, ...)
Unit: ms. The default value is 2000ms. 


9.3.1.54	Maximum Data Burst Volume
This IE indicates the Maximum Data Burst Volume for a QoS flow, and applies to delay critical GBR QoS flows only.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Maximum Data Burst Volume
M

INTEGER (0..4095, ..., 4096.. 2000000)
Unit: byte.

9.3.1.55	Masked IMEISV
This information element contains the IMEISV value with a mask, to identify a terminal model without identifying an individual Mobile Equipment.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Masked IMEISV
M

BIT STRING (SIZE (64))
Coded as the International Mobile station Equipment Identity and Software Version Number (IMEISV) defined in TS 23.003 [23] with the last 4 digits of the SNR masked by setting the corresponding bits to 1.
The first to fourth bits correspond to the first digit of the IMEISV, the fifth to eighth bits correspond to the second digit of the IMEISV, and so on.

9.3.1.56	Notification Control
The Notification Control IE indicates whether the notification control for a given DRB is active or not-active.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Notification Control 
M

ENUMERATED(Active, Not-Active, ...)


9.3.1.57	RAN Area Code
This information element is used to uniquely identify a RAN Area Code.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
RANAC
M

INTEGER (0..255)
RAN Area Code

9.3.1.58	PWS System Information
This IE contains the system information used for public warning.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
SIB type
M

INTEGER (6..8, …)
Indicates a certain SIB block for public warning message, e.g. 6 means sibType6, 7 for sibType7, etc.
-

SIB message
M

OCTET STRING
SIB message for public warning, as defined in TS 38.331 [8]. 
-

Notification Information
O



YES
ignore
>Message Identifier
M

9.3.1.81

-

>Serial Number
M

9.3.1.82

-

Additional SIB Message List
O

9.3.1.86
Additional SIB messages containing different segments of a public warning message if segmentation is applied, as defined in TS 38.331 [8].
Yes
reject

9.3.1.59	Repetition Period
This IE indicates the periodicity of the warning message to be broadcast.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Repetition Period
M

INTEGER (0..217-1)
The unit of value 1 to 217-1 is [second].

9.3.1.60	Number of Broadcasts Requested
This IE indicates the number of times a message is to be broadcast.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Number of Broadcasts Requested
M

INTEGER (0..65535)


9.3.1.61	Void
9.3.1.62	SIType List
This IE is used by gNB-CU to provide SI list of other SI for gNB-DU. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
SI type item IEs

1.. <maxnoofSITypes>


>SI Type
M

 
INTEGER (1..32, ...)
Indicates a certain SI type required to be broadcasted by the gNB-DU. The SI Type value of other SI starts from 2

Range bound
Explanation
maxnoofSITypes
Maximum no. of SI types, the maximum value is 32.

9.3.1.63	QoS Flow Identifier
This IE identifies a QoS Flow within a PDU Session. The definition and use of the QoS Flow Identifieris specified in TS 23.501 [21].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
QoS Flow Identifier
M

INTEGER (0 ..63)


9.3.1.64	Served E-UTRA Cell Information
This IE contains served cell information of an E-UTRA cell for spectrum sharing between E-UTRA and NR.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE EUTRA-Mode-Info
M



>FDD




>>FDD Info

1


>>>UL Offset to Point A
M

INTEGER (0..2199,...)
Indicates the offset to the center of the NR carrier for UL.
>>>DL Offset to Point A
M

INTEGER (0..2199,...)
Indicates the offset to the center of the NR carrier for DL. 
>TDD




>>TDD Info

1


>>>Offset to Point A
M

INTEGER (0..2199,...)
Indicates the offset to the center of the NR carrier.
Protected E-UTRA Resource Indication
O

OCTET STRING
Indicates the Protected E-UTRA Resource Indication as defined in subclause 9.2.125 of TS 36.423 [9].

9.3.1.65	Available PLMN List
This IE indicates the list of available PLMN.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Available PLMN Item IEs

1..< maxnoofBPLMNs >


>PLMN Identity
M

9.3.1.14


Range bound
Explanation
maxnoofBPLMNs
Maximum no. of Broadcast PLMN Ids. Value is 6.

9.3.1.66	RLC Failure Indication
This IE indicates the LCID associated with the RLC entity needing re-establishment.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Associated LCID
M

LCID
9.3.1.35


9.3.1.67	Uplink TxDirectCurrentList Information
This IE contains the Uplink TxDirectCurrentList information that is configured by the UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Uplink TxDirectCurrentList Information
M

OCTET STRING
UplinkTxDirectCurrentList as defined in TS 38.331 [8].

9.3.1.68	Service Status
This IE is used to indicate the service status of a cell by the gNB-DU. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Service State
M

ENUMERATED (In-Service, Out-Of-Service, ...)
Indicates the Service State of the cell. In-Service and Out-of-Service Service States are defined in TS 38.401 [4]. 
Switching Off Ongoing
O

ENUMERATED (True, ...)
This IE indicates that the gNB-DU will delete the cell after some time using a new gNB-DU Configuration Update procedure.

9.3.1.69	RLC Status
This IE indicates about the RLC configuration change included in the container towards the UE. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Reestablishment Indication
O

ENUMERATED (reestablished, ...)
Indicates that following a change in the radio status, the RLC has been re-established.

9.3.1.70	RRC Version
This information element is used to identify RRC version corresponding to TS 38.331 [8].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Latest RRC Version
M

BIT STRING (SIZE (3))
This IE is not used in this release.
-

Latest RRC Version Enhanced
O

OCTET STRING (SIZE (3))
Latest supported RRC version in the release corresponding to TS 38.331 [8]. For a 3GPP specification version x.y.z, x is encoded by the leftmost byte, y by the middle byte, and z by the rightmost byte.
If the RRC protocol is not supported in the gNB-DU, this IE is set to all ‘0’s.
YES
ignore

9.3.1.71	RRC Delivery Status
This IE provides information about the delivery status of RRC messages to the UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Delivery Status
M

INTEGER (0..212-1)
Highest NR PDCP SN successfully delivered in sequence to the UE.
Triggering Message
M

INTEGER (0..212-1)
NR PDCP SN for the RRC message that triggered the report.

9.3.1.72	QoS Flow Mapping Indication
This IE is used to indicate only the uplink or downlink QoS flow is mapped to the DRB.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
QoS Flow Mapping Indication
O

ENUMERATED(ul, dl,…)
Indicates that only the uplink or downlink QoS flow is mapped to the DRB

9.3.1.73	Resource Coordination Transfer Information
This IE contains information for UE-associated E-UTRA – NR resource coordination.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
MeNB Cell ID
M

BIT STRING (SIZE(28))
E-UTRAN Cell Identifier IE contained in the ECGI as defined in TS 36.423 [9] clause 9.2.14
Resource Coordination E-UTRA Cell Information
O

9.3.1.75


9.3.1.74	E-UTRA PRACH Configuration
This IE indicates the PRACH resources used in E-UTRA cell.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
RootSequenceIndex
M

INTEGER
(0..837)
 See section 5.7.2. in TS 36.211 [27]
ZeroCorrelationZoneConfiguration
M

INTEGER
(0..15)
See section 5.7.2. in TS 36.211 [27]
HighSpeedFlag
M

BOOLEAN
TRUE corresponds to Restricted set and FALSE to Unrestricted set. See section 5.7.2 in TS 36.211 [27]
PRACH-FrequencyOffset
M

INTEGER
(0..94)
See section 5.7.1 of TS 36.211 [27]
PRACH-ConfigurationIndex
C-ifTDD

INTEGER
(0..63)
See section 5.7.1. in TS 36.211 [27]

Condition
Explanation
ifTDD
This IE shall be present if the EUTRA-Mode-Info IE in the Resource Coordination E-UTRA Cell Information IE is set to the value "TDD".

9.3.1.75	Resource Coordination E-UTRA Cell Information
This IE contains E-UTRA cell information for UE-associated E-UTRA – NR resource coordination.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
CHOICE EUTRA-Mode-Info
M



-

>FDD




-

>>FDD Info

1


-

>>>UL EARFCN
O

INTEGER (0 .. maxExtendedEARFCN, ...)
The relation between EARFCN and carrier frequency (in MHz) is defined in TS 36.104 [25].
-

>>>DL EARFCN
M

INTEGER (0 .. maxExtendedEARFCN, ...)
The relation between EARFCN and carrier frequency (in MHz) is defined in TS 36.104 [25].
-

>>>UL Transmission Bandwidth
O

E-UTRA Transmission Bandwidth
9.3.1.80
Present if UL EARFCN IE is present.
-

>>>DL Transmission Bandwidth
M

E-UTRA Transmission Bandwidth
9.3.1.80

-

>TDD




-

>>TDD Info

1


-

>>>EARFCN
M

INTEGER (0 .. maxExtendedEARFCN, ...)
The relation between EARFCN and carrier frequency (in MHz) is defined in TS 36.104 [25].
-

>>>Transmission Bandwidth
M

E-UTRA Transmission Bandwidth
9.3.1.80

-

>>>Subframe Assignment
M

ENUMERATED(sa0, sa1, sa2, sa3, sa4, sa5, sa6,…)
Uplink-downlink subframe configuration information defined in TS 36.211 [27].
In NB-IOT, sa0 and sa6 are not applicable.
-

>>>Special Subframe Info

1

Special subframe configuration information defined in TS 36.211 [27]
-

>>>>Special Subframe Patterns
M

ENUMERATED(ssp0, ssp1, ssp2, ssp3, ssp4, ssp5, ssp6, ssp7, ssp8, ssp9, ssp10, …)

-

>>>>Cyclic Prefix DL
M

ENUMERATED(Normal, Extended,…)

-

>>>>Cyclic Prefix UL
M

ENUMERATED(Normal, Extended,…)

-

E-UTRA PRACH Configuration
M

9.3.1.74

-

Ignore PRACH Configuration
O

ENUMERATED (true,...)

YES
reject

Range bound
Explanation
maxExtendedEARFCN
Maximum value of extended EARFCN. Value is 262143.

9.3.1.76	Extended Available PLMN List
This IE indicates the list of available PLMN.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Extended Available PLMN Item IEs

1..< maxnoofExtendedBPLMNs >


>PLMN Identity
M

9.3.1.14


Range bound
Explanation
maxnoofExtendedBPLMNs
Maximum no. of Extended Broadcast PLMN Ids. Value is 6.

9.3.1.77	Associated SCell List
This IE indicates the list of SCells associated with the RLC entity indicated by the RLC Failure Indication IE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Associated SCell Item IEs

1..< maxnoofSCells >


-
-
>SCell ID
M

NR CGI
9.3.1.12

-


Range bound
Explanation
maxnoofSCells
Maximum no. of SCells allowed towards one UE, the maximum value is 32.

9.3.1.78	Cell Direction
This IE indicates if the cell is either bidirectional or only DL or only UL.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Cell Direction
M

ENUMERATED
(dl-only, ul-only)


9.3.1.79	Paging Origin
This IE indicates whether Paging is originated due to the PDU sessions from the non-3GPP access.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Paging Origin
M

ENUMERATED (non-3GPP, …)


9.3.1.80	E-UTRA Transmission Bandwidth
This IE is used to indicate the E-UTRA UL or DL transmission bandwidth expressed in units of resource blocks " NRB " (TS 36.104 [25]). The values bw1, bw6, bw15, bw25, bw50, bw75, bw100 correspond to the number of resource blocks "NRB" 6, 15, 25, 50, 75, 100.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
E-UTRA Transmission Bandwidth
M

ENUMERATED (bw6, bw15, bw25, bw50, bw75, bw100,... )


9.3.1.81	Message Identifier
This IE identifies the warning message.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Message Identifier
M

BIT STRING (SIZE(16))
This IE is set by the 5GC, transferred to the UE by the NG-RAN node.

9.3.1.82	Serial Number
This IE identifies a particular message from the source and type indicated by the Message Identifier and is altered every time the message with a given Message Identifier is changed.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Serial Number
M

BIT STRING (SIZE(16))


9.3.1.83	UAC Assistance Information
This information element contains assistance information helping the gNB-DU to set parameters for Unified Access Class barring.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
UAC PLMN List

1


>UAC PLMN Item

1..<maxnoofUACPLMNs>


>>PLMN Identity
M

9.3.1.14

>>UAC Type List

1


>>>UAC Type Item

1..<maxnoofUACperPLMN>


>>>>UAC Reduction Indication
M

9.3.1.85

>>>>CHOICE UAC Category Type
M



>>>>>UAC Standardized




>>>>>> UAC Action
M

9.3.1.84

>>>>>UAC Operator Defined




>>>>>>Access Category
M

INTEGER (32..63, …)
Indicates the operator defined Access Category as defined in subclause 6.3.2 in TS 38.331 [8].
>>>>>>Access Identity
M

BIT STRING (SIZE(7))
Indicates whether access attempt is allowed for each Access Identity as defined in subclause 6.3.2 in TS 38.331 [8].
>>NID
O

9.3.1.155


Range bound
Explanation
maxnoofUACPLMNs
Maximum no. of UAC PLMN Ids. Value is 12.
maxnoofUACperPLMN
Maximum no. of signalled categories per PLMN. Value is 64.

9.3.1.84	UAC Action
This IE indicates which signalling traffic is expected to be reduced by the gNB-CU, as defined in clause 8.7.7 of TS 38.413 [3]
IE/Group Name
Presence
Range
IE type and reference
Semantics description
UAC Action
M

ENUMERATED
(Reject RRC connection establishments for non-emergency MO DT, Reject RRC connection establishments for Signalling, Permit Emergency Sessions and mobile terminated services only, Permit High Priority Sessions and mobile terminated services only,…)


9.3.1.85		UAC reduction Indication
This IE indicates the percentage of signalling traffic expected to be reduced by the gNB-CU, relative to the instantaneous incoming rate from the gNB-DU
IE/Group Name
Presence
Range
IE type and reference
Semantics description
UAC reduction Indication
M

INTEGER (0..100)
Value 0 indicates that no access rate reduction is desired. In this version of specification, value 99 indicates the highest desired rate reduction.

9.3.1.86	Additional SIB Message List
This IE indicates the list of additional SIB messages containing all the remaining segments of a public warning message if segmentation is applied to such message. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description 
Additional SIB Message List Item IEs

1..
<maxnoofAdditionalSIBs >


>Additional SIB
M

OCTET STRING
SIB message containing one segment of a public warning message, as defined in TS 38.331 [8]. 


Range bound 
Explanation 
maxnoofAdditionalSIBs
Maximum no. of additional segments of a public warning message. Value is 63.

9.3.1.87	Cell Type
This IE provides the cell coverage area.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Cell Size
M

ENUMERATED (verysmall, small, medium, large, …)


9.3.1.87a	Configured TAC Indication
This IE indicates that the TAC with which this IE is associated, is only configured for the cell, but not broadcast.
NOTE:	This IE is defined in accordance to the possibility foreseen in TS 38.331 [8] to not broadcast the TAC if the NR cell only supports PSCell/SCell functionality.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Configured TAC Indication
M

ENUMERATED (true, ...)


9.3.1.88	Trace Activation
This IE defines parameters related to a trace session activation.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Trace ID
M

OCTET STRING (SIZE(8))
This IE is composed of the following: 
Trace Reference defined in TS 32.422 [29] (leftmost 6 octets, with PLMN information encoded as in 9.3.1.14), and
Trace Recording Session Reference defined in TS 32.422 [29] (last 2 octets).
-
-
Interfaces To Trace
M

BIT STRING (SIZE(8))
Each position in the bitmap represents an NG-RAN node interface:
first bit = NG-C, second bit = Xn-C, third bit = Uu, fourth bit = F1-C, fifth bit = E1:
other bits reserved for future use. Value '1' indicates 'should be traced'. Value '0' indicates 'should not be traced'.
-
-
Trace Depth
M

ENUMERATED (minimum, medium, maximum, minimumWithoutVendorSpecificExtension,
mediumWithoutVendorSpecificExtension,
maximumWithoutVendorSpecificExtension, …)
Defined in TS 32.422 [29].
-
-
Trace Collection Entity IP Address
M

Transport Layer Address
9.3.2.3
For File based Reporting.
Defined in TS 32.422 [29].
Should be ignored if URI is present.
-
-
MDT Configuration
O

9.3.1.150

YES
ignore
Trace Collection Entity URI
O

URI
9.3.2.6
For Streaming based Reporting.
Defined in TS 32.422 [11]
Replaces Trace Collection Entity IP Address if present
YES
ignore

9.3.1.89	Intended TDD DL-UL Configuration
This IE contains the subcarrier spacing, cyclic prefix and TDD DL-UL slot configuration of an NR cell that the receiving NG-RAN node needs to take into account for cross-link interference mitigation, and/or for NR-DC power coordination, when operating its own cells. 
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
NR SCS
M

ENUMERATED (scs15, scs30, scs60, scs120, …)
The values scs15, scs30, scs60 and scs120 corresponds to the sub carrier spacing in TS 38.104 [17].
NR Cyclic Prefix
M

ENUMERATED (Normal, Extended, …)
The type of cyclic prefix, which determines the number of symbols in a slot.
NR DL-UL Transmission Periodicity
M

ENUMERATED (ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms3, ms4, ms5, ms10, ms20, ms40, ms60, ms80, ms100, ms120, ms140, ms160, …)
The periodicity is expressed in the format msXpYZ, and equals X.YZ milliseconds.
Slot Configuration List

1


>Slot Configuration List Item

1..<maxnoofslots>


>>Slot Index
M

INTEGER (0..5119)

>>CHOICE Symbol Allocation in Slot
M



>>>All DL


NULL
This choice implies that all symbols in the slot are DL symbols.
>>>All UL


NULL
This choice implies that all symbols in the slot are UL symbols.
>>>Both DL and UL




>>>>Number of DL Symbols
M

INTEGER (0..13)
Number of consecutive DL symbols at the beginning of the slot identified by Slot Index. If extended cyclic prefix is used, the maximum value is 11.
>>>>Number of UL Symbols
M

INTEGER (0..13)
Number of consecutive UL symbols in the end of the slot identified by Slot Index. If extended cyclic prefix is used, the maximum value is 11.

Range bound
Explanation
maxnoofslots
Maximum length of number of slots in a 10-ms period. Value is 5120.

9.3.1.90	Additional RRM Policy Index
The Additional RRM Policy Index IE is used to provide additional information independent from the Subscriber Profile ID for RAT/Frequency priority as specified in TS 36.300 [20].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Additional RRM Policy Index
M

BIT STRING (32)


9.3.1.91	DU-CU RIM Information
This IE conveys the Remote Interference Management message from the gNB-DU to the gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Victim gNB Set ID
M

9.3.1.93

RIM-RS Detection Status
M

ENUMERATED(RS detected, RS disappeared)
This IE indicates detection status of RIM-RS in gNB-DU
Aggressor Cell List

1


>Aggressor Cell List Item

1..< maxCellingNBDU >


>>Aggressor Cell ID
M

NR CGI 
9.3.1.12


Range bound
Explanation
maxCellingNBDU
Maximum no. cells that can be served by a gNB-DU. Value is 512.

9.3.1.92	CU-DU RIM Information
This IE conveys the Remote Interference Management message from the gNB-CU to the gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Victim gNB Set ID
M

9.3.1.93

RIM-RS Detection Status
M

ENUMERATED(RS detected, RS disappeared)
This IE indicates detection status of RIM-RS in remote gNB(s).

9.3.1.93	gNB Set ID
The gNB Set ID IE is used to identify a group of gNBs which transmit the same RIM-RS.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
gNB Set ID
M

BIT STRING (SIZE(22))


9.3.1.94	Lower Layer Presence Status Change
This IE indicates lower layer resources’ presence status shall be changed.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Lower Layer Presence Status Change
M

ENUMERATED (suspend lower layers, resume lower layers ...)
"suspend lower layers" will store CellGroupConfig. From the parameters received within the ReconfigurationWithSync, only the sPCellConfigCommon is stored. "resume lower layers" shall restore SCG and it is set only after "suspend lower layers" has been indicated.

9.3.1.95	Traffic Mapping Information
This IE includes the information used by the gNB-DU to perform traffic mapping.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE Traffic Mapping Information Type
M



>IP to layer2 Traffic Mapping Info




>>IP to layer2 Traffic Mapping Info To Add
O

IP-to-layer-2 traffic mapping Information List
9.3.1.96
This IE indicates the mapping information for forwarding of IP traffic to layer-2 to be added. 
>>IP to layer2 Traffic Mapping Info To Remove 
O

Mapping Information to Remove
9.3.1.99
This IE indicates the mapping information for forwarding of IP traffic to layer 2 to be removed.
>BAP layer BH RLC channel Mapping Info




>>BAP layer BH RLC channel Mapping Info To Add 
O

BAP layer BH RLC channel mapping Information List
9.3.1.98
This IE indicates the mapping information for forwarding of traffic on BAP layer to be added.
>>BAP layer BH RLC channel Mapping Info To Remove 
O

Mapping Information to Remove
9.3.1.99
This IE indicates the mapping information for forwarding of traffic on BAP layer to be removed.

9.3.1.96	IP-to-layer-2 traffic mapping Information List
This IE includes the information used by the IAB-donor-DU to perform the mapping from IP layer to layer-2. If this IE appears in the UE-associated F1AP signalling, the BH Information IE should only contain the BAP Routing ID IE.

IE/Group Name
Presence
Range
IE type and reference
Semantics description
IP-to-layer-2 mapping information Item

1.. <maxnoofMappingEntries>


>Mapping Information Index
M

9.3.1.100

>IP header information
M

9.3.1.97

>BH Information
M

9.3.1.114


Range bound
Explanation
maxnoofMappingEntries
Maximum no. of mapping entries, the maximum value is 67108864 (i.e. 2^26).

9.3.1.97	IP Header Information
This IE indicates the IP header information included in the Traffic Mapping Information IE for DL traffic.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Destination IAB TNL Address
M

9.3.1.102
This IE indicates the destination IPv4 address, or IPv6 address or IPv6 prefix of a DL packet.
DS Information List

0.. <maxnoofDSInfo>


>DSCP
M

BIT STRING (SIZE(6))
This IE indicates the DS information of DL traffic.
IPv6 Flow Label
O

BIT STRING (SIZE(20))
This IE indicates the IPv6 Flow Label of DL traffic.

Range bound
Explanation
maxnoofDSInfo
Maximum no. of DSCP values related to a destination IP address that can be mapped to one BH RLC channel, the maximum value is 64.

9.3.1.98	BAP layer BH RLC channel mapping Information List
This IE includes the information used by the IAB-DU to perform the BH RLC channel mapping when forwarding traffic on BAP sublayer.
When this IE is included in the UE-associated F1AP signalling for setting up or modifying a BH RLC channel, it contains either the Prior-Hop BAP Address IE and the Ingress BH RLC CH ID IE to configure a mapping in downlink direction, or the Next-Hop BAP address IE and the Egress BH RLC CH ID IE to configure a mapping in uplink direction. This IE indicates the BH RLC channel served by the collocated IAB-MT.
When this IE is included in the non-UE-associated F1AP signalling, it shall contain the Prior-Hop BAP Address IE, the Ingress BH RLC CH ID IE, the Next-Hop BAP address IE and the Egress BH RLC CH ID IE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
BAP layer BH RLC channel mapping info Item

1.. <maxnoofMappingEntries>


>Mapping Information Index
M

9.3.1.100

>Prior-Hop BAP Address
O

9.3.1.111

>Ingress BH RLC CH ID
O

BH RLC Channel ID
9.3.1.113

>Next-Hop BAP Address
O

9.3.1.111

>Egress BH RLC CH ID 
O

BH RLC Channel ID
9.3.1.113


Range bound
Explanation
maxnoofMappingEntries
Maximum no. of mapping entries, the maximum value is 67108864 (i.e. 2^26).

9.3.1.99	Mapping Information to Remove
This IE includes a list of mapping information indexes corresponding to the mapping configuration which is to be removed.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Mapping Information to Remove List Item

1.. <maxnoofMappingEntries>


>Mapping Information Index
M

9.3.1.100


Range bound
Explanation
maxnoofMappingEntries
Maximum no. of mapping entries, the maximum value is 67108864 (i.e. 2^26).

9.3.1.100	Mapping Information Index
This IE includes an index of one mapping information entry at the IAB-donor-DU or an IAB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Mapping Information Index 
M

BIT STRING (SIZE(26))


9.3.1.101	IAB TNL Addresses Requested
The IAB TNL Addresses Requested IE indicates the number of IPv4 or IPv6 addresses or IPv6 address prefixes requested for the indicated usage.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
TNL Addresses or Prefixes Requested - All Traffic
O

INTEGER (1..256)
The number of TNL addresses/ IPv6 prefixes requested for all traffic.
TNL Addresses or Prefixes Requested - F1-C traffic
O

INTEGER (1..256)
The number of TNL addresses/IPv6 prefixes requested for F1-C traffic.
TNL Addresses or Prefixes Requested - F1-U traffic
O

INTEGER (1..256)
The number of TNL addresses/ IPv6 prefixes requested for F1-U traffic.
TNL Addresses or Prefixes Requested - Non-F1 traffic
O

INTEGER (1..256)
The number of TNL addresses/ IPv6 prefixes requested for non-F1 traffic.

9.3.1.102	IAB TNL Address
The IAB TNL Address IE indicates an IPv4 or IPv6 address or an IPv6 address prefix assigned to an IAB-node.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE IAB TNL Address
M



>IPv4 Address


BIT STRING (SIZE(32))
The IPv4 address allocated to an IAB-node.
>IPv6 Address


BIT STRING (SIZE(128))
The IPv6 address allocated to an IAB-node.
>IPv6 Prefix 


BIT STRING (SIZE(64))
The IPv6 address prefix allocated to an IAB-node.

9.3.1.103	Uplink BH Non-UP Traffic Mapping
This IE indicates the mapping of uplink non-UP traffic to a BH RLC channel and BAP Routing ID.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Uplink Non-UP Traffic Mapping List

1


>Uplink Non-UP Traffic Mapping List Item IEs

1 .. <maxnoofNonUPTrafficMappings> 


>>Non-UP Traffic Type
M

9.3.1.104

>>BH Information
M

9.3.1.114


Range bound
Explanation
maxnoofNonUPTrafficMappings
Maximum no. of non-UP traffic mappings. Value is 32.

9.3.1.104	Non-UP Traffic Type
This IE indicates the type of non-UP traffic.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Non-UP Traffic Type
M

ENUMERATED(UE-associated F1AP, non-UE-associated F1AP, non-F1, BAP control PDU, ...)


9.3.1.105	IAB Info IAB-donor-CU
This IE contains cell-specific IAB-related information sent by an IAB-donor-CU to an IAB-DU or IAB-donor-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
IAB STC Info
O

9.3.1.109
Contains STC configuration of IAB-DU or IAB-donor-DU.

9.3.1.106	IAB Info IAB-DU
This IE contains cell-specific IAB-related information sent by an IAB-DU or IAB-donor-DU to an IAB-donor-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Multiplexing Info
O

9.3.1.108
Contains the information about multiplexing with cells configured for a collocated IAB-MT. Applicable for an IAB-DU.
IAB STC Info
O

9.3.1.109
Contains the information about STC configuration of IAB-DU or IAB-donor-DU.

9.3.1.107	gNB-DU Cell Resource Configuration 
This IE contains the resource configuration of the cells served by a gNB-DU, i.e. the TDD/FDD resource parameters for each activated cell (TS 38.213 [31], clause 11.1.1).
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
Subcarrier Spacing
M

ENUMERATED (kHz15, kHz30, kHz60, kHz120, kHz240, spare3, spare2, spare1, …)
Subcarrier spacing used as reference for the TDD/FDD slot configuration.
YES
reject
DUF Transmission Periodicity 
O

ENUMERATED (ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms5, ms10, …)

YES
reject
DUF Slot Configuration List

0..1




>DUF Slot Configuration Item

1..<maxnoofDUFSlots>

The maxNrofSlots in TS 38.331 [8].
-

>>CHOICE DUF Slot Configuration
M



-

>>>Explicit Format




-

>>>>Permutation
M

ENUMERATED (DFU, UFD, …)

-

>>>>Number of Downlink Symbols
O

INTEGER (0..14)

-

>>>>Number of Uplink Symbols
O

INTEGER (0..14)

-

>>>Implicit Format






>>>>DUF Slot Format Index
M

INTEGER (0..254)
Index into Table 11.1.1-1 and Table 14-2 in TS 38.213 [31], excluding the last row in Table 14-2.
-

HSNA Transmission Periodicity 
M

ENUMERATED (ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms5, ms10, ms20, ms40, ms80, ms160, …)

YES
reject
HSNA Slot Configuration List

0..1




>HSNA Slot Configuration Item

1..<maxnoofHSNASlots>




>>HSNA Downlink
O

ENUMERATED (HARD, SOFT, NOTAVAILABLE)
HSNA value for downlink symbols in a slot.
-

>>HSNA Uplink
O

ENUMERATED (HARD, SOFT, NOTAVAILABLE)
HSNA value for uplink symbols in a slot.
-

>>HSNA Flexible
O

ENUMERATED (HARD, SOFT, NOTAVAILABLE)
HSNA value for flexible symbols in a slot.
-


Range bound
Explanation
maxnoofDUFSlots
Maximum no. of slots in 10ms. Value is 320.
maxnoofSymbols
Maximum no. of symbols in a slot. Value is 14.
maxnoofHSNASlots
Maximum no of "Hard", "Soft" or "Not available" slots in 160ms. Value is 5120.

9.3.1.108	Multiplexing Info
This IE contains information about the multiplexing capabilities between the gNB-DU’s cell and the cells configured on the collocated IAB-MT.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
IAB-MT Cell List

1


>IAB-MT Cell Item

1 .. <maxnoofServingCells>


>>NR Cell Identity
M

BIT STRING (SIZE(36))
Cell identity of a serving cell configured for a collocated IAB-MT.
>>DU_RX/MT_RX
M

ENUMERATED (supported, not supported)
An indication of whether the IAB-node supports simultaneous reception at its DU and MT side.
>>DU_TX/MT_TX
M

ENUMERATED (supported, not supported)
An indication of whether the IAB-node supports simultaneous transmission at its DU and MT side.
>>DU_TX/MT_RX
M

ENUMERATED (supported, not supported)
An indication of whether the IAB-node supports simultaneous transmission at its DU and reception at its MT side.
>>DU_RX/MT_TX
M

ENUMERATED (supported, not supported)
An indication of whether the IAB-node supports simultaneous reception at its DU and transmission at its MT side.

Range bound
Explanation
maxnoofServingCells
Maximum no. of serving cells for IAB-MT. Value is 32, as defined by the maxNrofServingCells in TS 38.331 [8].

9.3.1.109	IAB STC Info
This IE contains cell SSB Transmission Configuration (STC) information of an IAB-DU or IAB-donor-DU. The information is used by neighbour IAB-MTs for discovery and measurements of this IAB-DU or IAB-donor-DU.

IE/Group Name
Presence
Range
IE type and reference
Semantics description
IAB STC-Info List

1


>IAB STC-Info Item

1 ..<maxnoofIABSTCInfo>


>>SSB Frequency Info
M

INTEGER (0.. maxNRARFCN)

The SSB central frequency.

>>SSB Subcarrier Spacing
M

ENUMERATED (kHz15, kHz30, kHz120, kHz240, spare3, spare2, spare1, …)

The SSB subcarrier spacing.
>>SSB Transmission Periodicity
M

ENUMERATED (sf5, sf10, sf20, sf40, sf80, sf160, sf320, sf640, ...)

>>SSB Transmission Timing Offset
M

INTEGER (0.. 127, …)
SSB transmission timing offset in number of half-frames.
>>CHOICE SSB Transmission Bitmap 
M


The SSB-ToMeasure IE defined in TS 38.331 [8].
>>>Short Bitmap
M

BIT STRING (SIZE (4))

>>>Medium Bitmap
M

BIT STRING (SIZE (8))

>>>Long Bitmap
M

BIT STRING (SIZE (64))


Range bound
Explanation
maxnoofIABSTCInfo
Maximum no. of STC configurations. Value is 5. This includes 1 STC configuration for access and 4 STC configurations for backhaul.
maxNRARFCN
Maximum value of NR ARFCNs. Value is 3279165.

9.3.1.110	BAP Routing ID
This IE indicates the BAP Routing ID.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
BAP Address
M

9.3.1.111

Path ID
M

BAP Path ID
9.3.1.112


9.3.1.111	BAP Address
This IE indicates the BAP address of an IAB-node or of an IAB-donor-DU, and it is part of the BAP Routing ID.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
BAP Address
M

BIT STRING (SIZE(10))
Corresponds to the bap-Address-r16, defined in subclause 6.2.2 or subclause 6.3.2 of TS 38.331 [8], or the iab-donor-DU-BAP-address-r16 defined in subclause 6.2.2 of TS 38.331[8].

9.3.1.112	BAP Path ID
This IE indicates the BAP path ID, which is part of the BAP Routing ID.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
BAP Path ID
M

BIT STRING (SIZE(10))
Corresponds to the Bap-Pathid-r16 defined in subclause 6.3.2 of TS 38.331 [8].

9.3.1.113	BH RLC Channel ID
This IE uniquely identifies a BH RLC channel in the link between IAB-MT of the IAB-node and IAB-DU of the parent IAB-node or IAB-donor-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
BH RLC CH ID
M

BIT STRING (SIZE(16))


9.3.1.114	BH Information
This IE includes the backhaul information for UL or DL.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
BAP Routing ID
O

9.3.1.110
This IE is not needed for the BAP control PDU.
For UL F1-U traffic, the BAP address included in this IE also indicates the IAB-donor-DU via which the DL traffic is transmitted.
Egress BH RLC CH List

0..1


>Egress BH RLC CH List Item

1..
<maxnoofEgressLinks>


>>Next-Hop BAP Address
M

9.3.1.111
This IE identifies the next-hop node on the backhaul path to receive the packet. The value of this IE should be unique in the whole list.
>>Egress BH RLC CH ID
M

BH RLC Channel ID
9.3.1.113
This IE identifies the BH RLC channel in the link between the IAB node/IAB-donor-DU and the node identified by the Next-Hop BAP Address IE.

Range bound
Explanation
maxnoofEgressLinks
Maximum no. of egress links. Value is 2.

9.3.1.115	Control Plane Traffic Type
This IE indicates the control plane traffic type carried over a BH RLC channel.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Control Plane Traffic Type
M

INTEGER (1..3, ...)
Control plane traffic types with different priorities are identified by the different codepoints in this IE, where 1 has the highest priority.

9.3.1.116	NR V2X Services Authorized
This IE provides information on the authorization status of the UE to use the NR sidelink for V2X services.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Vehicle UE
O

ENUMERATED (authorized, not authorized, ...)
Indicates whether the UE is authorized as Vehicle UE.
Pedestrian UE
O

ENUMERATED (authorized, not authorized, ...)
Indicates whether the UE is authorized as Pedestrian UE.

9.3.1.117	LTE V2X Services Authorized
This IE provides information on the authorization status of the UE to use the LTE sidelink for V2X services.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Vehicle UE
O

ENUMERATED (authorized, not authorized, ...)
Indicates whether the UE is authorized as Vehicle UE.
Pedestrian UE
O

ENUMERATED (authorized, not authorized, ...)
Indicates whether the UE is authorized as Pedestrian UE.

9.3.1.118	LTE UE Sidelink Aggregate Maximum Bit Rate
This IE provides information on the Aggregate Maximum Bitrate of the UE’s communication over LTE sidelink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
LTE UE Sidelink Aggregate Maximum Bit Rate
M

Bit Rate
9.3.1.4
Value 0 shall be considered as a logical error by the receiving gNB-DU.

9.3.1.119	NR UE Sidelink Aggregate Maximum Bit Rate
This IE provides information on the Aggregate Maximum Bitrate of the UE’s communication over NR sidelink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
NR UE Sidelink Aggregate Maximum Bit Rate
M

Bit Rate
9.3.1.4
Value 0 shall be considered as a logical error by the receiving gNB-DU.

9.3.1.120	SL DRB ID
This IE uniquely identifies a SL DRB for a UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
SL DRB ID
M

INTEGER (1.. 512, ...)
Corresponds to the SLRB-Uu-ConfigIndex defined in TS 38.331 [8].

9.3.1.121	PC5 QoS Flow Identifier
This IE uniquely identifies one sidelink QoS flow between the UE and the network in the scope of UE.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
PC5 QoS Flow Identifier 
M

INTEGER (1.. 2048)
Corresponds to the SL-QoS-FlowIdentity defined in TS 38.331 [8].

9.3.1.122	PC5 QoS Parameters
This IE defines the QoS to be applied to a SL DRB.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
CHOICE PC5 QoS Characteristics
M



-

>Non-dynamic PQI




-

>>Non Dynamic PQI Descriptor
M

9.3.1.126

-

>Dynamic PQI




-

>>Dynamic PQI Descriptor
M

9.3.1.127

-

PC5 QoS Flow Bit Rates
O


Only applies for GBR QoS Flows.
-

>Guaranteed Flow Bit Rate
M

Bit Rate
9.3.1.22
Guaranteed Bit Rate for the PC5 QoS flow. Details in TS 23.287 [40].
-

>Maximum Flow Bit Rate
M

Bit Rate
9.3.1.22
Maximum Bit Rate for the PC5 QoS flow. Details in TS 23.287 [40].
-


Range bound
Explanation
maxnoofPC5QoSFlows
Maximum no. of PC5 QoS flows allowed towards one UE for NR sidelink communication, the maximum value is 2048.

9.3.1.123	Alternative QoS Parameters Set Index
This IE indicates the QoS parameters set which can currently be fulfilled.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Alternative QoS Parameters Set Index
M

INTEGER (1..8, ...) 
Indicates the index of the item within the Alternative QoS Parameters Set List IE corresponding to the currently fulfilled alternative QoS parameters set.

9.3.1.124	Alternative QoS Parameters Set Notify Index
This IE indicates the QoS parameters set which can currently be fulfilled.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Alternative QoS Parameters Set Notify Index
M

INTEGER (0..8, ...)
Indicates the index of the item within the the Alternative QoS Parameters Set List IE corresponding to the currently fulfilled alternative QoS parameters set. Value 0 indicates that NG-RAN cannot even fulfil the lowest alternative parameter set.

9.3.1.125	Alternative QoS Parameters Set List
This IE contains alternative sets of QoS parameters which the NG-RAN node can indicate to be fulfilled when notification control is enabled and it cannot fulfil the requested list of QoS parameters.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Alternative QoS Parameters Set Item

1..<maxnoofQoSParaSets>


>Alternative QoS Parameters Set Index
M

9.3.1.123

>Guaranteed Flow Bit Rate Downlink
O

Bit Rate 
9.3.1.22

>Guaranteed Flow Bit Rate Uplink
O

Bit Rate 
9.3.1.22

>Packet Delay Budget
O

9.3.1.51

>Packet Error Rate
O

9.3.1.52


Range bound
Explanation
maxnoofQoSParaSets
Maximum no. of alternative sets of QoS Parameters allowed for the QoS profile. Value is 8.

9.3.1.126	Non Dynamic PQI Descriptor
This IE indicates the QoS Characteristics for a standardized or pre-configured PQI for sidelink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
5QI
M

INTEGER (0..255,...)
This IE contains the standardized or pre-configured PQI as specified in TS 23.287 [40]
QoS Priority Level
O

INTEGER (1..8,…)
For details see TS 23.501 [21]. When included overrides standardized or pre-configured value.
Averaging Window
O

9.3.1.53
For details see TS 23.501 [21]. When included overrides standardized or pre-configured value.
Maximum Data Burst Volume
O

9.3.1.54
For details see TS 23.501 [21]. When included overrides standardized or pre-configured value.

9.3.1.127	Dynamic PQI Descriptor
This IE indicates the QoS Characteristics for a Non-standardised or not pre-configured PQI for sidelink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Resource Type
O

ENUMERATED (GBR, non-GBR, delay critical GBR, …)

QoS Priority Level
O

INTEGER (1..8, …)
For details see TS 23.501 [21].
Packet Delay Budget
O

9.3.1.51
For details see TS 23.501 [21].
Packet Error Rate
O

9.3.1.52
For details see TS 23.501 [21].
Averaging Window
C-ifGBRflow 

9.3.1.53
For details see TS 23.501 [21].
Maximum Data Burst Volume
O

9.3.1.54
For details see TS 23.501 [21]. This IE shall be included if the Delay Critical IE is set to "delay critical" and is ignored otherwise.

Condition
Explanation
ifGBRflow
This IE shall be present if the PC5 QoS Flow Bit Rates IE is present in the PC5 QoS parameters IE.

9.3.1.128	TNL Capacity Indicator
The TNL Capacity Indicator IE indicates the offered and available capacity of the Transport Network experienced by the gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
DL TNL Offered Capacity
M

INTEGER (1.. 16777216,...)
Maximum capacity offered by the transport portion of the gNB-DU – gNB-CU in kbps
DL TNL Available Capacity
M

INTEGER (0.. 100,...)
Available capacity over the transport portion serving the node in percentage. Value 100 corresponds to the offered capacity
UL TNL Offered Capacity
M

INTEGER (1.. 16777216,...)
Maximum capacity offered by the transport portion of the gNB-DU – gNB-CU in kbps
UL TNL Available Capacity
M

INTEGER (0.. 100,...)
Available capacity over the transport portion serving the node in percentage. Value 100 corresponds to the offered capacity

9.3.1.129	Radio Resource Status
The Radio Resource Status IE indicates the usage of the PRBs per cell and per SSB area for all traffic in Downlink and Uplink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
SSB Area Radio Resource Status List

1


>SSB Area Radio Resource Status Item

1..<maxnoofSSBAreas>


>>SSB Index
M

INTEGER (0..63)

>>SSB Area DL GBR PRB usage
M

INTEGER (0..100)
Per SSB area DL GBR PRB usage
>>SSB Area UL GBR PRB usage
M

INTEGER (0..100)
Per SSB area UL GBR PRB usage
>>SSB Area DL non-GBR PRB usage
M

INTEGER (0..100)
Per SSB area DL non-GBR PRB usage
>>SSB Area UL non-GBR PRB usage
M

INTEGER (0..100)
Per SSB area UL non-GBR PRB usage
>>SSB Area DL Total PRB usage
M

INTEGER (0..100)
Per SSB area DL Total PRB usage
>>SSB Area UL Total PRB usage
M

INTEGER (0..100)
Per SSB area UL Total PRB usage
>>DL scheduling PDCCH CCE usage
O

INTEGER (0..100)

>>UL scheduling PDCCH CCE usage
O

INTEGER (0..100)


Range bound
Explanation
maxnoofSSBAreas
Maximum no. SSB Areas that can be served by a cell. Value is 64.

9.3.1.130	Composite Available Capacity Group
The Composite Available Capacity Group IE indicates the overall available resource level per cell and per SSB area in the cell in Downlink and Uplink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Composite Available Capacity Downlink
M

Composite Available Capacity 
9.3.1.131
For the Downlink 
Composite Available Capacity Uplink
M

Composite Available Capacity 
9.3.1.131
For the Uplink 

9.3.1.131	Composite Available Capacity
The Composite Available Capacity IE indicates the overall available resource level in the cell in either Downlink or Uplink.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Cell Capacity Class Value
O

9.3.1.132

Capacity Value 
M

9.3.1.133
‘0’ indicates no resource is available, Measured on a linear scale. 

9.3.1.132	Cell Capacity Class Value
The Cell Capacity Class Value IE indicates the value that classifies the cell capacity with regards to the other cells. The Cell Capacity Class Value IE only indicates resources that are configured for traffic purposes.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Capacity Class Value
M

INTEGER (1..100,...)
Value 1 shall indicate the minimum cell capacity, and 100 shall indicate the maximum cell capacity. There should be a linear relation between cell capacity and Cell Capacity Class Value.

9.3.1.133	Capacity Value
The Capacity Value IE indicates the amount of resources per cell and per SSB area that are available relative to the total gNB-DU resources. The capacity value should be measured and reported so that the minimum gNB-DU resource usage of existing services is reserved according to implementation. The Capacity Value IE can be weighted according to the ratio of cell capacity class values, if available.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Capacity Value
M

INTEGER (0..100)
Value 0 shall indicate no available capacity, and 100 shall indicate maximum available capacity with respect to the whole cell. Capacity Value should be measured on a linear scale.
SSB Area Capacity Value List

0..1


>SSB Area Capacity Value Item

1..<maxnoofSSBAreas>


>>SSB Index
M

INTEGER (0..63)

>>SSB Area Capacity Value
M

INTEGER (0..100)
Value 0 shall indicate no available capacity, and 100 shall indicate maximum available capacity . SSB Area Capacity Value should be measured on a linear scale.

Range bound
Explanation
maxnoofSSBAreas
Maximum no. SSB Areas that can be served by a cell. Value is 64.

9.3.1.134	Slice Available Capacity
The Slice Available Capacity IE indicates the amount of resources per network slice that are available per cell relative to the total gNB-DU resources per cell. The Slice Capacity Value Downlink IE and the Slice Capacity Value Uplink IE can be weighted according to the ratio of the corresponding cell capacity class values contained in the Composite Available Capacity Group IE, if available.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Slice Available Capacity List

1


Slice Available Capacity Item

1..< maxnoofBPLMNsNR >


>PLMN Identity
M

9.3.1.14
Broadcast PLMN
>S-NSSAI Available Capacity List

1


>>S-NSSAI Available Capacity Item
M
1 .. < maxnoofSliceItems>


>>>S-NSSAI


9.3.1.38

>>>Slice Available Capacity Value Downlink
O

INTEGER (0..100)
Value 0 shall indicate no available capacity, and 100 shall indicate maximum available capacity . Slice Capacity Value should be measured on a linear scale.
>>>Slice Available Capacity Value Uplink
O

INTEGER (0..100)
Value 0 shall indicate no available capacity, and 100 shall indicate maximum available capacity . Slice Capacity Value should be measured on a linear scale.

Range bound
Explanation
maxnoofSliceItems
Maximum no. of signalled slice support items. Value is 1024. 
maxnoofBPLMNsNR
Maximum no. of PLMN Ids.broadcast in a cell. Value is 12.

9.3.1.135	Number of Active UEs
The Number of Active UEs IE indicates the mean number of active UEs as defined in TS 38.314 [32].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Mean number of Active UEs 
M

INTEGER (0..16777215, ...)
As defined in TS 38.314 [32] and where value "1" is equivalent to 0.1 Active  UEs, value "2" is equivalent to 0.2 Active UEs, value n is equivalent to n/10 Active UEs.

9.3.1.136	Hardware Load Indicator
The Hardware Load Indicator IE indicates the status of the Hardware Load.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
DL Hardware Load Indicator
M

INTEGER (0..100)
This indicates the load in percent
UL Hardware Load Indicator
M

INTEGER (0..100)
This indicates the load in percent

9.3.1.137	NR Carrier List
This IE indicates the SCS-specific carriers per TDD, per DL, per UL or per SUL of an NR cell.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
NR Carrier Item

1..<maxnoofNRSCSs>


>NR SCS
M

ENUMERATED (scs15, scs30, scs60, scs120, …)
SCS for the corresponding carrier.
>Offset to Carrier
M

INTEGER (0.. 2199, ...)
Offset in frequency domain between Point A (lowest subcarrier of common RB 0) and the lowest usable subcarrier on this carrier in number of PRBs (using the NR SCS IE defined for this carrier). The maximum value corresponds to 275×8−1. See TS 38.211 [33], clause 4.4.2.
>Carrier Bandwidth
M

INTEGER (1.. maxnoofPhysicalResourceBlocks, ...)
Width of this carrier in number of PRBs (using the NR SCS IE defined for this carrier). See TS 38.211 [33], clause 4.4.2.


9.3.1.138	SSB Positions In Burst
Indicates the time domain positions of the transmitted SS-blocks in a half frame with SS/PBCH blocks as defined in TS 38.213 [31], clause 4.1.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE ssb-PositionsInBurst
M


The first/ leftmost bit corresponds to SS/PBCH block index 0, the second bit corresponds to SS/PBCH block index 1, and so on. Value 0 in the bitmap indicates that the corresponding SS/PBCH block is not transmitted while value 1 indicates that the corresponding SS/PBCH block is transmitted.
>ShortBitmap




>>ShortBitmap
M

BIT STRING (SIZE(4))

>MediumBitmap




>>MediumBitmap
M

BIT STRING (SIZE(8))

>LongBitmap




>>LongBitmap
M

BIT STRING (SIZE(64))


9.3.1.139	NR PRACH Configuration
This IE indicates the PRACH resources by a NR cell.  
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
UL PRACH Configuration
M

NR PRACH Configuration List
9.3.1.140

SUL PRACH Configuration
O

NR PRACH Configuration List
9.3.1.140


9.3.1.140	NR PRACH Configuration List
This IE indicates the PRACH resources used or reserved in the UL carrier(s) or SUL carrier(s) of the current NR cell.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
NR PRACH Configuration Item

0..< maxnoofPrachConfiguration >

Length=0 means releasing of all NR PRACH Configuration Items for this UL or SUL.
>NR SCS
M

ENUMERATED (scs15, scs30, scs60, scs120, …)
The SCS of the carrier to which this PRACH Configuration Item relates, i.e.  in Section 5.3.2 in TS 38.211 [33]. The values scs15, scs30, scs60 and scs120 corresponds to the sub carrier spacing in TS 38.104 [17].
NOTE: Its value may not be identical to the SCS of MSG1.
> PRACH Frequency Start from Carrier 
M

INTEGER (0.. maxNrofPhysicalResourceBlocks-1, …)
Lowest number of resource blocks which can be used to deliver MSG1, counting from the start number of the corresponding carrier.
Identical to  in Section 5.1.2.2.2 in TS 38.214 [34] plus msg1-FrequencyStart in TS 38.331 [8].
>MSG1-FDM
M

ENUMERATED (one, two, four, eight, …)
 in Section 6.3.3.2 in TS 38.211 [33].
>PRACH Configuration Index
M

INTEGER (0.. 255, …, 256..262)
See Section 6.3.3.2 in TS 38.211 [33].
>SSB per RACH Occasion 
M

ENUMERATED (oneEighth, oneFourth, oneHalf, one, two, four, eight, sixteen, ...)
Number of SSBs per RACH occasion. Value oneEight corresponds to one SSB associated with 8 RACH occasions, value oneFourth corresponds to one SSB associated with 4 RACH occasions, and so on.
>CHOICE FreqDomainLength
M


For the case of PRACH resources reserved for BFR or MSG1-based SI Request, L139 is always used.
>>L839




>>>L839 Info

1


>>>>Root Sequence Index
M

INTEGER (0..837)
See Section 6.3.3.1 in TS 38.211 [33].
>>>>Restricted Set Config
M

ENUMERATED (unrestrictedSet, restrictedSetTypeA, restrictedSetTypeB, …)
See Section 6.3.3.1 in TS 38.211 [33].
>>L139




>>>L139 Info

1


>>>>MSG1 SCS
M

ENUMERATED (scs15, scs30, scs60, scs120, …)
Subcarrier Spacing used in sending MSG1, i.e.  in Section 5.3.2 in TS 38.211 [33].
>>>>Root Sequence Index  
M

INTEGER (0..137)
See Section 6.3.3.1 in TS 38.211 [33].
>Zero Correlation Zone Config
M

INTEGER (0..15)
See Section 6.3.3.1 in TS 38.211 [33].


9.3.1.141	TSC Traffic Characteristics
This IE provides the traffic characteristics of TSC QoS flows.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
TSC Assistance Information Downlink
O

TSC Assistance Information
9.3.1.142

TSC Assistance Information Uplink
O

TSC Assistance Information
9.3.1.142


9.3.1.142	TSC Assistance Information
This IE provides the TSC assistance information for a TSC QoS flow in the uplink or downlink (see TS 23.501 [21]). 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Periodicity
M

9.3.1.143
Periodicity as specified in TS 23.501 [21].
Burst Arrival Time
O

9.3.1.144
Burst Arrival Time as specified in TS 23.501 [21].

9.3.1.143	Periodicity
This IE indicates the Periodicity as defined in TS 23.501 [21]. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Periodicity 
M

INTEGER (0..640000, …)
Periodicity expressed in units of 1 us.

9.3.1.144	Burst Arrival Time
This IE indicates the Burst Arrival Time as defined in TS 23.501 [21]. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Burst Arrival Time
M

OCTET STRING
Encoded in the same format as the ReferenceTime IE as defined in TS 38.331 [8]. The value is truncated to 1 us granularity.

9.3.1.145	Extended Packet Delay Budget
This IE indicates the Packet Delay Budget for a QoS flow.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Extended Packet Delay Budget
M

INTEGER (0..65535, …)
Upper bound value for the delay that a packet may experience expressed in unit of 0.01ms.

9.3.1.146	RLC Duplication Information 
The IE contains the RLC duplication information in case that the indicated DRB is configured with more than two RLC entities as specified in TS 38.331 [8].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
RLC Duplication State List

1


>RLC Duplication State Items

1 .. <maxnoofRLCDuplicationState>

Each position in the list represents a secondary RLC entity in ascending order by the logical channel ID in the order of MCG and SCG.

>>Duplication State
M

ENUMERATED (Active, Inactive, ...)

Primary Path Indication
O

ENUMERATED (True, False...)
Indicates whether the primary path is located at the gNB-DU for DC based PDCP duplication.

Range bound
Explanation
maxnoofRLCDuplicationState
Maximum no of Secondary RLC entities. Value is 3.

9.3.1.147	Reporting Request Type 
This IE indicates the type of accurate reference time information reporting to be handled by the gNB-DU.

IE/Group Name
Presence
Range
IE type and reference
Semantics description
Event Type
M

ENUMERATED (on demand, periodic, stop, …)

Report Periodicity Value
C-ifEventTypeisPeriodic

INTEGER (0..512, …)
Indicates the periodicity of accurate reference time information report, 
Unit in radio frame.

C-ifEventYpeisStop
Explanation
ifEventTypeisPeriodic
This IE shall be present if the Event Type IE is set to "periodic".

9.3.1.148	Time Reference Information
This IE contains the time reference information.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Reference Time
M

9.3.1.149

Reference SFN
M

INTEGER (0..1023)

Uncertainty
O

INTEGER (0..32767, …) 
This field indicates the uncertainty of the reference time information provided in ReferenceTimeInfo IE, refer to 6.3.2 of TS 38.331 [8].
Time Information Type
O

ENUMERATED (localClock)


9.3.1.149	Reference Time
This IE provides the accurate Reference Time information.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Reference Time
M

OCTET STRING
Includes the ReferenceTime IE as defined in 6.3.2 of TS 38.331 [8]. 

9.3.1.150	MDT Configuration
The IE defines the MDT configuration parameters.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
MDT Activation
M

ENUMERATED(Immediate MDT only, Immediate MDT and Trace, …)

Measurements to Activate
M

BITSTRING
(SIZE(8)) 
Each position in the bitmap indicates a MDT measurement, as defined in TS 37.320 [35].
Second Bit = M2,
Fifth Bit = M5,
Seventh Bit = M6,
Eighth Bit = M7.

Value "1" indicates "activate" and value "0" indicates "do not activate".

This version of the specification does not use bits 1, bit 3, bit 4 and bit 6.
M2 Configuration
C-ifM2

ENUMERATED (true, …)

M5 Configuration
C-ifM5

9.3.1.152

M6 Configuration
C-ifM6

9.3.1.153

M7 Configuration
C-ifM7

9.3.1.154 


Condition
Explanation
ifM2
This IE shall be present if the Measurements to Activate IE has the second bit set to "1".
ifM5
This IE shall be present if the Measurements to Activate IE has the fifth bit set to "1".
ifM6
This IE shall be present if the Measurements to Activate IE has the seventh bit set to "1".
ifM7
This IE shall be present if the Measurements to Activate IE has the eighth bit set to "1".

9.3.1.151	MDT PLMN List
The purpose of the MDT PLMN List IE is to provide the list of PLMN allowed for MDT.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
MDT PLMN List

1..<maxnoofMDTPLMNs>


>PLMN Identity
M

PLMN ID
9.3.1.14


Range bound
Explanation
maxnoofMDTPLMNs
Maximum no. of PLMNs in the MDT PLMN list. Value is 16.

9.3.1.152	M5 Configuration
This IE defines the parameters for M5 measurement collection.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
M5 Collection Period
M

 ENUMERATED (ms1024, ms2048, ms5120, ms10240, min1, …)

M5 Links to log
M

ENUMERATED(uplink, downlink, both-uplink-and-downlink, …)


9.3.1.153	M6 Configuration
This IE defines the parameters for M6 measurement collection.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
M6 Report Interval
M

ENUMERATED (ms120, ms240, ms480, ms640, ms1024, ms2048, ms5120, ms10240, ms20480, ms40960, min1,min6, min12, min30,…)

M6 Links to log
M

ENUMERATED(uplink, downlink, both-uplink-and-downlink, …)


9.3.1.154	M7 Configuration
This IE defines the parameters for M7 measurement collection.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
M7 Collection Period
M

INTEGER (1..60, …)
Unit: minutes
M7 Links to log
M

ENUMERATED(downlink, …)


9.3.1.155	NID
This IE is used to identify (together with a PLMN identifier) a Stand-alone Non-Public Network. The NID is specified in TS 23.003 [23].
IE/Group Name
Presence
Range
IE type and reference
Semantics description
NID
M

BIT STRING (SIZE(44))


9.3.1.156	NPN Support Information
This IE contains NPN related information associated with Network Slicing information.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE NPN Support Information
M



>SNPN Information




>>NID
M

9.3.1.155


9.3.1.157	NPN Broadcast Information
This IE contains NPN related broadcast information.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE NPN Broadcast Information per PLMN
M



>SNPN Information




>>Broadcast SNPN ID List
M

9.3.1.158

>PNI-NPN Information




>>Broadcast PNI-NPN ID List
M

9.3.1.162


9.3.1.158	Broadcast SNPN ID List
This IE contains SNPN related broadcast information associated with a set of PLMNs.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Broadcast SNPN ID List

1..<maxnoofNIDs>


>PLMN Identity
M

9.3.1.14

>Broadcast NID List
M

9.3.1.159


Range bound
Explanation
maxnoofNIDs
Maximum no. of NIDs broadcast in a cell. Value is 12.

9.3.1.159	Broadcast NID List
This IE contains a list of NIDs.
IE/Group Name
Presence
RangeNIDsupported
IE type and reference
Semantics description
Broadcast NID

1..<maxnoofNIDsupported


>NID
M

9.3.1.155


Range bound
Explanation
maxnoofNIDsupported
Maximum no. of NIDs broadcast in a cell. Value is 12.

9.3.1.160	Broadcast CAG-Identifier List
This IE contains a list of CAG-Identifiers.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Broadcast CAG-Identifier List

1..<maxnoofCAGsupported>


>CAG ID
M

9.3.1.161


Range bound
Explanation
maxnoofCAGsupported
Maximum no. of CAG-Identifiers broadcast in a cell. Value is 12.

9.3.1.161	CAG ID 
This IE is used to identify (together with a PLMN identifier) a Public Network Integrated NPN, as defined in TS 23.003 [23].

IE/Group Name
Presence
Range
IE type and reference
Semantics description
CAG ID
M

BIT STRING (SIZE (32))
Closed Access Group ID used in NR.

9.3.1.162	Broadcast PNI-NPN ID Information
This IE contains a list of PNI-NPN IDs.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Broadcast PNI-NPN ID Information

1..<maxnoofBPLMNs>

Broadcast PLMNs
>PLMN Identity
M

9.3.1.14

>Broadcast CAG-Identifier List
M

9.3.1.160


Range bound
Explanation
maxnoofBPLMNs
Maximum no. of broadcast PLMNs by a cell. Value is 12.

9.3.1.163	Available SNPN ID List
This IE indicates the list of available SNPN ID.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Available SNPN ID List

1..<maxnoofNIDs>


>PLMN Identity
M

9.3.1.14

>Available NID List
M

Broadcast NID List
9.3.1.159


Range bound
Explanation
maxnoofNIDs
Maximum no. of NIDs broadcast in a cell. Value is 12.

9.3.1.164	Void

9.3.1.165	Extended Slice Support List
This IE indicates a list of supported slices.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Slice Support Item IEs

1..<maxnoofExtSliceItems>


>S-NSSAI
M

9.3.1.38


Range bound
Explanation
maxnoofExtSliceItems
Maximum no. of signalled slice support items. Value is 65535.

9.3.1.166	Positioning Measurement Result 
The purpose of this information element is to provide the measurement result(s).
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Positioning Measured Result Item

1 .. <maxnoofPosMeas>


>CHOICE Measured Results Value
M



>>UL Angle of Arrival
M

9.3.1.167

>>UL SRS-RSRP
M

INTEGER (0..126)

>>UL RTOA
M

UL RTOA Measurement
9.3.1.168

>>gNB Rx-Tx Time Difference
M

9.3.1.170

>Time Stamp
M

9.3.1.171

>Measurement Quality
O

TRP Measurement Quality
9.3.1.172

>Measurement Beam Information
O

9.3.1.173


Range bound
Explanation
maxnoofPosMeas
Maximum no. of measured quantities that can be configured and reported with one message. Value is 16384.

9.3.1.167	UL Angle of Arrival 
This information element contains the uplink Angle of Arrival measurement.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Azimuth Angle of Arrival
M

INTEGER(0..3599)
TS 38.133 [38]
Zenith Angle of Arrival
O

INTEGER(0..1799)
TS 38.133 [38]
LCS to GCS Translation

0..1

If absent, the azimuth and zenith are provided in GCS.
>Alpha
M

INTEGER (0..3599)

>Beta
M

INTEGER (0..3599)

>Gamma
M

INTEGER (0..3599)


9.3.1.168	UL RTOA Measurement 
This information element contains the uplink RTOA measurement.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE UL RTOA Measurement
M



>k0
M

INTEGER (0.. 1970049)
TS 38.133 [38]
>k1
M

INTEGER (0.. 985025)
TS 38.133 [38]
>k2
M

INTEGER (0.. 492513)
TS 38.133 [38]
>k3
M

INTEGER (0.. 246257)
TS 38.133 [38]
>k4
M

INTEGER (0.. 123129)
TS 38.133 [38]
>k5
M

INTEGER (0.. 61565)
TS 38.133 [38]
Additional Path List
O

9.3.1.169



9.3.1.169	Additional Path List 
This information element contains the additional path results of time measurement.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Additional Path Item

1..<maxnoofPath>


>CHOICE Relative Path Delay
M



>>k0
M

INTEGER(0..16351)

>>k1
M

INTEGER(0..8176)

>>k2
M

INTEGER(0..4088)

>>k3
M

INTEGER(0..2044)

>>k4
M

INTEGER(0..1022)

>>k5
M

INTEGER(0..511)

>Path Quality
O

TRP Measurement Quality
9.3.1.172



Range bound
Explanation
maxnoofPath
Maximum no. of additional path measurements. Value is 2.

9.3.1.170	gNB Rx-Tx Time Difference
This information element contains the gNB Rx-Tx Time Difference measurement.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE gNB Rx-Tx Time Difference Measurement
M



>k0
M

INTEGER (0.. 1970049)
TS 38.133 [38]
>k1
M

INTEGER (0.. 985025)
TS 38.133 [38]
>k2
M

INTEGER (0.. 492513)
TS 38.133 [38]
>k3
M

INTEGER (0.. 246257)
TS 38.133 [38]
>k4
M

INTEGER (0.. 123129)
TS 38.133 [38]
>k5
M

INTEGER (0.. 61565)
TS 38.133 [38]
Additional Path List
O

9.3.1.169


9.3.1.171	Time Stamp
This information element contains the time stamp associated with the measurement.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
System Frame Number
M

INTEGER(0..1023)

CHOICE Slot Index
M



>SCS-15
M

INTEGER(0..9)

>SCS-30
M,

INTEGER(0..19)

>SCS-60
M

INTEGER(0..39)

>SCS-120
M

INTEGER(0..79)

Measurement Time
O

Relative Time 1900
9.3.1.183


9.3.1.172	TRP Measurement Quality 
This information element contains the TRP’s best estimate of the quality of the measurement.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE TRP Measurement Quality
M



>Timing Measurement Quality




>>Measurement Quality
M

INTEGER(0..31)
TS 37.355 [39]
>>Resolution
M

ENUMERATED(0.1m, 1m, 10m, 30m, …)
TS 37.355 [39]
>Angle Measurement Quality




>> Azimuth Quality
M

INTEGER(0..255)

>> Zenith Quality
O

INTEGER(0..255)

>>Resolution
M

ENUMERATED (0.1deg, …)


9.3.1.173	Measurement Beam Information
This information element contains the receiving beam information when measuring UL signals.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
PRS Resource ID
O

INTEGER(0..63)

PRS Resource Set ID
O

INTEGER(0..7)

SSB Index
O

INTEGER(0..63)


9.3.1.174	NG-RAN Access Point Position
This IE is used to identify the geographical position of an NG-RAN Access Point / TRP / TRP Antenna Reference Points. It is expressed as ellipsoid point with altitude and uncertainty ellipsoid according to TS 23.032 [36].
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Latitude Sign
M

ENUMERATED (North, South)

Degrees Of Latitude
M

INTEGER
(0..223-1)
The IE value (N) is derived by this formula:
N223 X /90  N+1
X being the latitude in degrees (0°.. 90°).
Degrees Of Longitude
M

INTEGER
(-223..223-1)
The IE value (N) is derived by this formula:
N224 X /360  N+1
X being the longitude in degrees (-180°..+180°).
Direction of Altitude
M

ENUMERATED (Height, Depth)


Altitude
M

INTEGER
(0..215-1)
The relation between the value (N) and the altitude (a) in meters it describes is N  a < N+1, except for N=215-1 for which the range is extended to include all greater values of (a).
Uncertainty semi-major
M

INTEGER (0..127)
The uncertainty "r" is derived from the "uncertainty code" k by r = 10x(1.1k-1).
Uncertainty semi-minor
M

INTEGER (0..127)
The uncertainty "r" is derived from the "uncertainty code" k by r = 10x(1.1k-1).
Orientation of major axis
M

INTEGER (0..179)

Uncertainty Altitude
M

INTEGER (0..127)
The uncertainty altitude "h" expressed in metres is derived from the "uncertainty code" k, by:
h=45x(1.025k-1).
Confidence
M

INTEGER (0..100)
In percentage

9.3.1.175	Requested SRS Transmission Characteristics
This IE contains the requested SRS configuration for the UE for positioning purposes.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Criticality
Assigned Criticality
Number Of Periodic Transmissions
C-ifResourceTypePeriodic

INTEGER (0..500,…)
The number of periodic SRS transmissions requested. The value of ‘0’ represents an infinite number of SRS transmissions.
-

Resource Type
M

ENUMERATED (periodic, semi-persistent, aperiodic, …)

-

CHOICE Bandwidth SRS
M



-

>FR1




-

>>FR1 Bandwidth
M

ENUMERATED (5, 10, 20, 40, 50, 80, 100, ...)

-

>FR2




-

>>FR2 Bandwidth
M

ENUMERATED (50, 100, 200, 400,…)

-

SRS Resource Set List

0.. 1


-

>SRS Resource Set Item

1..< maxnoSRS-ResourceSets>


-

>>Number of SRS Resources Per Set
O

INTEGER (1..16,...)
The number of SRS Resources per resource set for SRS transmission. 
-

>>Periodicity List

0.. 1


-

>>>Periodicity List Item

1..<maxnoSRS-ResourcePerSet>


-

>>>>PeriodicitySRS
M

ENUMERATED (0.125, 0.25, 0.5, 0.625, 1, 1.25, 2, 2.5, 4, 5, 8, 10, 16, 20, 32, 40, 64, 80, 160, 320, 640, 1280, 2560, 5120, 10240, …)
Milli-seconds
-

>>Spatial Relation Information
O

9.3.1.181
This IE is ignored if the Spatial Relation Information per SRS Resource IE is present.
-

>>Pathloss Reference Information
O

9.3.1.201

-

>>Spatial Relation Information per SRS Resource
O

9.3.1.210

YES
ignore
SSB Information
O

9.3.1.202

-

SRS Frequency
O

INTEGER(0..3279165)

NR ARFCN 
The carrier frequency of SRS transmission bandwidth.
YES
ignore

Condition
Explanation
ifResourceTypePeriodic
This IE shall be present if the Resource Type IE is set to the value "Periodic".

Range bound
Explanation
maxnoSRS-ResourceSets
Maximum no of requested SRS Resource Sets for SRS transmission. Value is 16.
maxnoSRS-ResourcePerSet
Maximum no of SRS Resources per set. Value is 16.

9.3.1.176	TRP Information
The TRP Information IE contains information for one TRP within a gNB-DU. 
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Criticality
Assigned Criticality
TRP ID
M

9.3.1.197

-

TRP Information Type Response List

1


-

>TRP Information Type Response Item

1 .. <maxnoofTRPInfoTypes>


-

>>CHOICE TRP Information Type Response Item
M



-

>>>NR PCI
M

INTEGER (0..1007)
NR Physical Cell ID
-

>>>NR CGI


9.3.1.12

-

>>>NR ARFCN
M

INTEGER (0..3279165)

-

>>>PRS Configuration
M

9.3.1.177

-

>>>SSB Information
M

9.3.1.202

-

>>>SFN Initialisation Time
M

Relative Time 1900
9.3.1.183

-

>>>Spatial Direction Information
M

9.3.1.179

-

>>>Geographical Coordinates
M

9.3.1.184

-

>>>TRP Type
M

ENUMERATED (prs-only-tp, srs-only-rp, tp, rp, trp…)
TS 38.305 [42]
YES
reject

Range bound
Explanation
maxnoofTRPInfoTypes
Maximum no of TRP information types that can be requested and reported with one message. Value is 64.

9.3.1.177	PRS Configuration
This information element contains the DL PRS configuration for the TRP.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
PRS Resource Set List
M
1..<maxnoofPRSresourceSets>


>PRS Resource Set ID
M

INTEGER(0..7)

>Subcarrier Spacing
M

ENUMERATED(kHz15, kHz30, kHz60, kHz120, …)

>PRS bandwidth
M

INTEGER(1..63)
24,28,…,272 PRBs
>Start PRB
M

INTEGER(0..2176)
Starting PRB to Point A
>Point A
M

INTEGER (0..3279165)
NR ARFCN
>Comb Size
M

ENUMERATED(2, 4, 6, 12, …)

>CP Type
M

ENUMERATED(normal, extended, …)

>Resource Set Periodicity
M

ENUMERATED(4,5,8,10,16,20,32,40,64,80,160,320,640,1280,2560,5120,10240,20480,40960,81920, …)

>Resource Set Slot Offset
M

INTEGER(0..81919,…)

>Resource Repetition Factor
M

ENUMERATED(rf1,rf2,rf4,rf6,rf8,rf16,rf32,…)

>Resource Time Gap
M

ENUMERATED(tg1,tg2,tg4,tg8,tg16,tg32,…)

>Resource Number of Symbols
M

ENUMERATED(n2,n4,n6,n12,…)

>PRS Muting
O



>>Option1
O



>>>Muting Pattern
M

DL-PRS Muting Pattern 
9.3.1.178
Muting pattern option 1 is used to mute the whole PRS resource set (within a period)
>>>Muting Bit Repetition Factor
M

ENUMERATED(rf1,rf2,rf4,rf8,…)

>>Option2
O



>>>Muting Pattern
M

DL-PRS Muting Pattern 
9.3.1.178
Muting pattern option 2 is used to mute the selected repetition of the resource set (within the period)
>PRS Resource Transmit Power
M

INTEGER(-60..50)

>PRS Resource List
M
1..<maxnoofPRSresources>

NR-DL-PRS-Resource-r16 as defined in TS 37.355 [39]
>>PRS Resource ID
M

INTEGER(0..63)

>>Sequence ID
M

INTEGER(0..4095)

>>RE Offset
M

INTEGER(0..11, …)

>>Resource Slot Offset
M

INTEGER(0..511)

>>Resource Symbol Offset
M

INTEGER(0..12)

>>CHOICE QCL Info
O



>>>SSB




>>>>PCI
M

INTEGER (0..1007)

>>>>SSB Index
O

INTEGER(0..63)

>>>DL-PRS
O



>>>>QCL Source PRS Resource Set ID
M

INTEGER(0..7)

>>>>QCL Source PRS Resource ID 
O

INTEGER(0..63)
If absent, the QCL source PRS resource ID is the same as the PRS resource ID

Range bound
Explanation
maxnoofPRSresourceSets
Maximum no of PRS resource sets. Value is 8.
maxnoofPRSresources
Maximum no of PRS resources per PRS resource set. Value is 64.

9.3.1.178	DL-PRS Muting Pattern 
This information element contains the DL-PRS muting pattern.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE DL-PRS Muting Pattern
M



>Two
M

BIT STRING (SIZE(2))

>Four
M

BIT STRING (SIZE(4))

>Six
M

BIT STRING (SIZE(6))

>Eight
M

BIT STRING (SIZE(8))

>Sixteen
M

BIT STRING (SIZE(16))

>Thirty-two
M

BIT STRING (SIZE(32))


9.3.1.179	Spatial Direction Information 
This information element contains the spatial direction information of the DL PRS resources for the TRP.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
NR-PRS Beam Information
M

9.3.1.198
The spatial directions of DL-PRS Resources for TRP

9.3.1.180	SRS Resource Set ID 
This information element indicates a resource set in the UE for UL SRS transmission.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
SRS Resource Set ID
M

INTEGER (0..15)
According to TS 38.331 [8]

9.3.1.181	Spatial Relation Information
This information element indicates a spatial relation for transmission of UL SRS by a UE.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Spatial Relation for Resource ID

1

According to TS 38.321 [16] and and TS 38.331 [8]
>Spatial Relation for Resource ID Item

1..<maxnoSpatialRelations>


>>CHOICE Reference Signal
M



>>>NZP CSI-RS




>>>>NZP CSI-RS Resource ID
M

INTEGER (0..191)

>>>SSB




>>>>PCI
M

INTEGER (0..1007)

>>>>SSB Index
O

INTEGER (0..63)

>>>SRS




>>>>SRS Resource ID
M

INTEGER (0..63)

>>>Positioning SRS




>>>> Positioning SRS Resource ID
M

INTEGER (0..63)

>>>DL-PRS




>>>>DL-PRS ID
M

INTEGER (0..255)

>>>>DL-PRS Resource Set ID
M

INTEGER (0..7)

>>>>DL PRS Resource ID
O

INTEGER (0..63)


Range bound
Explanation
maxnoSpatialRelations
Maximum no. of Spatial Relations that can be configured.  Value is 64. 

9.3.1.182	SRS Resource Trigger
This information element indicates a DCI code point according to a SRS resource set configuration.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Aperiodic SRS Resource Trigger List

1..<maxnoSRS-TriggerStates>

According to TS 38.331 [8]
>Aperiodic SRS Resource Trigger


INTEGER (1..3)


Range bound
Explanation
maxnoSRS-TriggerStates
Maximum no. of SRS trigger states. Value is 3. 

9.3.1.183	Relative Time 1900
This information element indicates the initialisation time (e.g. SFN Initalisation Time for a cell, requested time for an action, etc).
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Relative Time 1900
M

BIT STRING (SIZE(64))
Time in seconds relative to 00:00:00 on 1 January 1900 (calculated as continuous time without leap seconds and traceable to a common time reference) where binary encoding of the integer part is in the first 32 bits and binary encoding of the fraction part in the last 32 bits. The fraction part is expressed with a granularity of 1 /2**32 second

9.3.1.184	Geographical Coordinates
This information element contains the geographical coordinates for the TRP.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE TRP Position Definition Type
M



>Direct




>>CHOICE Accuracy
M



>>>normal accuracy




>>>>TRP Position
M

NG-RAN Access Point Position
9.3.1.174
The configured estimated geographical position of the antenna of the cell/TRP.
>>>high accuracy




>>>>TRP High Accuracy Access Position
M

NG-RAN High Accuracy Access Point Position
9.3.1.190
The configured estimated geographical high accuracy position of the antenna of the cell/TRP.
>Referenced




>>Reference Point
M

9.3.1.188
The reference point is used to derive the TRP position
>>CHOICE Type
M



>>>Geodetic




>>>>TRP Position Relative Geodetic
M

Relative Geodetic Location
9.3.1.186
The configured estimated relative geodetic coordinate of the antenna of the cell/TRP
>>>Cartesian




>>>>TRP Position Relative Cartesian
M

Relative Cartesian Location
9.3.1.187
The configured estimated relative Cartesian coordinate of the antenna of the cell/TRP
DL-PRS Resource Coordinates
O

9.3.1.185
DL-PRS Resource Coordinates relative to the TRP coordinate

9.3.1.185	DL-PRS Resource Coordinates
This information element contains the geographical coordinates of the antenna reference points (ARP) for the DL-PRS Resources of a TRP.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
DL-PRS Resource Set ARP List
M
1..<maxnoofPRS-ResourceSets>


>DL-PRS Resource Set ID
M

INTEGER (0..7)

>CHOICE DL-PRS Resource Set ARP Location
M


Relative to the geographical coordinates for the TRP. If this IE is absent, the Relative Location is zero for the indicated DL-PRS Resource Set ID.
>>Geodetic




>>>Relative Geodetic Location
M

Relative Geodetic Location 9.3.1.186

>>Cartesian




>>>Relative Cartesian Location
M

Relative Cartesian Location 9.3.1.187

>DL-PRS Resource ARP List
M
1..<maxnoofPRS-ResourcesPerSet>


>>DL-PRS Resource ID
M

INTEGER (0..63)

>>CHOICE DL-PRS Resource ARP Location
M


Relative to the DL-PRS Resource Set ARP Location.
If this IE is absent, the Relative Location is zero for the indicated DL-PRS Resource ID.
>>Geodetic




>>>Relative Geodetic Location
O

Relative Geodetic Location 9.3.1.186

>>Cartesian




>>>Relative Cartesian Location
O

Relative Cartesian Location 9.3.1.187


Range bound
Explanation
maxnoofPRS-ResourceSets
Maximum no of DL-PRS resource sets per TRP. Value is 2.
maxnoofPRS-ResourcesPerSet
Maximum no of DL-PRS resources of the DL-PRS resource set of the TRP. Value is 64.

9.3.1.186	Relative Geodetic Location
This information element provides a location relative to some known reference location in a relative geodetic coordinate system.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Milli-Arc-Second Units
M

ENUMERATED (0.03, 0.3, 3, ...)
Units and scale factor for the delta-latitude and delta-longitude fields, TS 37.355 [39].
Height Units
M

ENUMERATED (mm, cm, m, ...)
Units and scale factor for the delta-height field, TS 37.355 [39].
Delta Latitude
M

INTEGER (-1024..1023)
Delta value in latitude in the unit provided in Milli-Arc-Second Units, TS 37.355 [39].
Delta Longitude
M

INTEGER (-1024..1023)
Delta value in longitude in the unit provided in Milli-Arc-Second Units, TS 37.355 [39].
Delta Height
M

INTEGER (-1024..1023)
Delta value in ellipsoidal height in the unit provided in Height Units, TS 37.355 [39].
Location uncertainty
M

9.3.1.189


9.3.1.187	Relative Cartesian Location
This information element provides a location relative to some known reference location in a relative Cartesian coordinate.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
XYZ unit
M

ENUMERATED (mm, cm, dm,..)

X value
M

INTEGER
(-216.. 216-1)
Positive value represents easting from reference point, in units of XYZ Unit IE.
Y value
M

INTEGER
(-216.. 216-1)
Positive value represents northing from reference point in units of XYZ Unit IE.
Z value
M

INTEGER
(-215.. 215-1)
Height with respect to reference point in units of XYZ Unit IE, where the XY-plane is horizontal and the Z-axis points up.
Location uncertainty
M

9.3.1.189


9.3.1.188	Reference Point
This information element provides a reference point location information. 
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE ReferencePoint
M


Reference point to which relative location information is related to 
>Coordinate ID




>>Coordinate ID
M

INTEGER(0.. 29-1,..)
Referential ID mapped via OAM
>Reference Point Coordinates
 
 
 
 
>>Reference Point Position
M
 
NG-RAN Access Point Position
9.3.1.174
 
>Reference Point Coordinates High Accuracy
 
 

 
>>Reference Point High Accuracy Access Position 
M
 
NG-RAN High Accuracy Access Point Position
9.3.1.190
 

9.3.1.189	Location Uncertainty
This information element provides the location uncertainty information. 
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Horizontal Uncertainty
M

INTEGER (0..255)
Horizontal uncertainty of the ARP latitude/longitude. Corresponds to the encoded high accuracy uncertainty as defined in TS 23.032 [36]
Horizontal Confidence
M

INTEGER (0..100)
Corresponds to confidence as defined in TS 23.032 [36].
Vertical Uncertainty
M

INTEGER (0..255)
Vertical uncertainty of the ARP altitude. Corresponds to the encoded high accuracy uncertainty as defined in TS 23.032 [36]
Vertical Confidence
M

INTEGER (0..100)
Corresponds to confidence as defined in TS 23.032 [36].

9.3.1.190	NG-RAN High Accuracy Access Point Position
The NG-RAN High Accuracy Access Point Position IE is used to identify the geographical position of an NG-RAN Access Point. It is expressed as High Accuracy Ellipsoid point with altitude and uncertainty ellipsoid according to TS 23.032 [36].
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Degrees of Latitude
M

INTEGER(-2147483648..2147483647)

Degrees of Longitude
M

INTEGER(-2147483648..2147483647)

Altitude
M

INTEGER(-64000..1280000)

Uncertainty Semi Major
M

INTEGER (0..255)

Uncertainty Semi Minor
M

INTEGER (0..255)

Orientation Major Axis
M

INTEGER (0..179)

Horizontal Confidence
M

INTEGER (0..100)

Uncertainty Altitude
M

INTEGER (0..255)

Vertical Confidence
M

INTEGER (0..100)


9.3.1.191	Positioning Broadcast Cells
This IE is used to indicate the cells that are requested to broadcast, or failed to broadcast, the associated posSIB(s).
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Positioning Broadcast Cells

1 .. <maxnoBcastCell>


>NR CGI
M

9.3.1.12


Range bound
Explanation
maxnoBcastCells
Maximum no. of cells broadcasting a posSIB in a NB-DU. Value is 16384.

9.3.1.192		SRS Configuration
This information element contains the SRS configuration configured by the gNB-CU for the UE.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
SRS Carrier List

1..<maxnoSRS-Carriers>


>Point A
M

INTEGER (0..3279165)
NR ARFCN
>Uplink Channel BW-PerSCS-List

1..<maxnoSCSs>

SCS-SpecificCarrier TS 38.331 [8]
>>Offset To Carrier
M

INTEGER(0..2199,…)
First usable RB to Point A in the number of PRBs
>>Subcarrier Spacing
M

ENUMERATED(kHz15, kHz30, kHz60, kHz120,…)

>>Carrier Bandwidth
M

INTEGER(1..275,…)

>Active UL BWP
M


Only the configuration in the active UL BWP is needed.
>>Location And Bandwidth
M

INTEGER(0..37949,…)
BWP TS 38.331 [8]
>>Subcarrier Spacing
M

ENUMERATED(kHz15, kHz30, kHz60, kHz120,…)

>>Cyclic Prefix
M

ENUMERATED(Normal, Extended)

>>Tx Direct Current Location
M

INTEGER(0..3301,…)

>>Shift7dot5kHz
O

ENUMERATED(true,…)

>>SRS Config
M


SRS-Config as defined in TS 38.331 [8]
>>>SRS Resource List

0..<maxnoSRS-Resources>


>>>>SRS Resource
M

9.3.1.193
SRS-Resource as defined in TS 38.331 [8]
>>>Positioning SRS Resource List

0..<maxnoSRS-PosResources>


>>>>Positioning SRS Resource
M

9.3.1.194
SRS-PosResource-r16 as defined in TS 38.331 [8]
>>>SRS Resource Set List

0..<maxnoSRS-ResourceSets>


>>>>SRS Resource Set
M

9.3.1.195
SRS-ResourceSet as defined in TS 38.331 [8]
>>>Positioning SRS Resource Set List

0..<maxnoSRS-PosResourceSets>


>>>>Positioning SRS Resource Set 
M

9.3.1.196
SRS-PosResourceSet-r16 as defined in TS 38.331 [8]
>PCI
O
 
INTEGER (0..1007)
Physical Cell ID of the cell that contains the SRS carrier

Range bound
Explanation
maxnoSRS-Carriers
Maximum no of carriers for SRS. Value is 32.
maxnoSCSs
Maximum no of SCS spacings for a carrier. Value is 5.
maxnoSRS-Resources
Maximum no of SRS resources per UL BWP. Value is 64.
maxnoSRS-PosResources
Maximum no of positioning SRS resources per UL BWP. Value is 64.
maxnoSRS-ResourceSets
Maximum no of SRS resource sets. Value is 16.
maxnoSRS-PosResourceSets
Maximum no of positioning SRS resource sets per UL BWP. Value is 16.

9.3.1.193	SRS Resource
This information element contains the SRS resource.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
SRS Resource ID
M

INTEGER (0..63, ...)

Number of Ports
M

ENUMERATED(ports1, ports2, ports4)

CHOICE Transmission Comb
M



>Comb Two




>>Comb Offset
M

INTEGER(0..1)

>>Cyclic Shift
M

INTEGER(0..7)

>Comb Four




>>Comb Offset
M

INTEGER(0..3)

>>Cyclic Shift
M

INTEGER(0..11)

Start Position
M

INTEGER(0..13)

Number of Symbols
M

ENUMERATED(1,2,4)

Repetition Factor
M

ENUMERATED(1,2,4)

Frequency Domain Position
M

INTEGER(0..67)

Frequency Domain Shift
M

INTEGER(0..268)

C-SRS
M

INTEGER(0..63)

B-SRS
M

INTEGER(0..3)

B-Hop
M

INTEGER(0..3)

Group or Sequence Hopping
M

ENUMERATED(Neither, groupHopping, sequenceHopping)

CHOICE Resource Type
M



>Periodic




>>Periodicity
M

ENUMERATED(slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, …)

>>Offset
M

INTEGER(0..2559, …)

>Semi-persistent




>>Periodicity
M

ENUMERATED(slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, …)

>>Offset
M

INTEGER(0..2559, …)

>Aperiodic




>>Aperiodic Resource Type
M

ENUMERATED(true,…)

Sequence ID
M

INTEGER(0..1023)


9.3.1.194	Positioning SRS Resource
This information element contains the SRS resource for positioning.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Positioning SRS Resource ID
M

INTEGER (0..63)

CHOICE Transmission Comb Positioning
M



>Comb Two




>>Comb Offset
M

INTEGER(0..1)

>>Cyclic Shift
M

INTEGER(0..7)

>Comb Four




>>Comb Offset
M

INTEGER(0..3)

>>Cyclic Shift
M

INTEGER(0..11)

>Comb Eight




>>Comb Offset
M

INTEGER(0..7)

>>Cyclic Shift
M

INTEGER(0..5)

Start Position
M

INTEGER(0..13)

Number of Symbols
M

ENUMERATED(1,2,4,8,12)

Frequency Domain Shift
M

INTEGER(0..268)

C-SRS
M

INTEGER(0..63)

Group or Sequence Hopping
M

ENUMERATED(Neither, groupHopping, sequenceHopping)

CHOICE Resource Type Positioning
M



>Periodic




>>Periodicity
M

ENUMERATED(slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, slot5120, slot10240, slot40960, slot81920,…)

>>Offset
M

INTEGER(0..81919,…)

>Semi-persistent




>>Periodicity
M

ENUMERATED(slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, slot5120, slot10240, slot20480, slot40960, slot81920,…)

>>Offset
M

INTEGER(0..81919,…)

>Aperiodic




>>Slot offset
M

INTEGER(0..32)

Sequence ID
M

INTEGER(0..65535)

CHOICE Spatial Relation Positioning
O



>SSB




>>PCI
M

INTEGER (0..1007)

>>SSB index
O

INTEGER(0..63)

>PRS




>>PRS ID
M

INTEGER(0..255)

>>PRS Resource Set ID
M

INTEGER(0..7)

>>PRS Resource ID
O

INTEGER(0..63)


9.3.1.195	SRS Resource Set
This information element indicates a SRS resource set in the UE for UL SRS transmission.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
SRS Resource Set ID
M

INTEGER(0..15)

SRS Resource ID List

1..<maxnoSRS-ResourcePerSet>


>SRS Resource ID
M

INTEGER (0..63, ...)

CHOICE Resource Set Type
M



>Periodic




>>PeriodicSet
M

ENUMERATED(true,…)

>Semi-persistent




>>Semi-persistentSet
M

ENUMERATED(true,…)

>Aperiodic




>>SRS Resource Trigger List
M

INTEGER(1..3)

>>Slot offset
M

INTEGER(0..32)


Range bound
Explanation
maxnoSRS-ResourcePerSet
Maximum no of SRS resources per SRS resource set. Value is 16.

9.3.1.196	Positioning SRS Resource Set
This information element indicates a positioning SRS resource set in the UE for UL SRS transmission.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Positioning SRS Resource Set ID
M

INTEGER(0..15)

Positioning SRS Resource ID List

1..<maxnoSRS-PosResourcePerSet>


>Positioning SRS Resource ID
M

INTEGER (0..63, ...)

CHOICE Resource Type
M



>Periodic




>>PosperiodicSet
M

ENUMERATED(true,…)

>Semi-persistent




>>Possemi-persistentSet
M

ENUMERATED(true,…)

>Aperiodic




>>SRS Resource Trigger List
M

INTEGER(1..3)


Range bound
Explanation
maxnoSRS-PosResourcePerSet
Maximum no of positioning SRS resources per positioning SRS resource set. Value is 16.

9.3.1.197	TRP ID
The TRP ID IE is used to identify a TRP uniquely within a gNB-CU. 
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
TRP Identifier
M

INTEGER (1..65535,…)
Identifies a TRP within an gNB-CU

9.3.1.198	NR-PRS Beam Information
This IE contains spatial direction information of the DL-PRS Resources.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Criticality
Assigned Criticality
NR-PRS Beam Information List

1




>NR-PRS Beam Information Item

1 .. < maxnoofPRS-ResourceSets >




>>PRS Resource Set ID
M

INTEGER (0..7)
The resource set in which the resources are associated with the angle.


>>PRS Angle List

1




>>>PRS Angle Item
 
1..< maxnoofPRS-ResourcesPerSet >
 



>>>>NR PRS Azimuth
M

INTEGER (0..359)



>>>>NR PRS Azimuth fine
O

INTEGER (0..9)
Fine angles


>>>>NR PRS Elevation
O

INTEGER (0..180)



>>>>NR PRS Elevation fine
O

INTEGER (0..9)
Fine angles


>>>PRS Resource ID
O

INTEGER(0..63)

YES
ignore
LCS to GCS Translation List

0..1

If absent, the azimuth and elevation are provided in GCS.


>LCS to GCS Translation

1 .. <maxnooflcs-gcs-translation>




>>Alpha
M

INTEGER (0..359)



>>Alpha-fine
O

INTEGER (0..9)
Fine angles


>>Beta
M

INTEGER (0..359)



>>Beta-fine
O

INTEGER (0..9)
Fine angles


>>Gamma
M

INTEGER (0..359)



>>Gamma-fine
O

INTEGER (0..9)
Fine angles



Range bound
Explanation
maxnoofPRS-ResourceSets
Maximum no of DL-PRS resource sets per TRP. Value is 2.
maxnoofPRS-ResourcesPerSet
Maximum no of DL-PRS resources of the DL-PRS resource set of the TRP. Value is 64.
maxnooflcs-gcs-translation
Maximum no. of LCS-GS-Translation-Parameters that can reported with one message. Value is 3. The current version of the specification supports 1.

9.3.1.199	E-CID Measurement Result
The purpose of this IE is to provide the E-CID measurement result.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Geographical Coordinates
O

9.3.1.184
The configured estimated geographical position of the antenna of the cell.
Measured Results List

0..1


>E-CID Measured Results Item

1 .. <maxnoMeasE-CID>


>>CHOICE Measured Results Value
M



>>>Value Angle of Arrival NR
M

UL Angle of Arrival
9.3.1.167


Range bound
Explanation
maxnoMeasE-CID
Maximum no. of measured quantities that can be configured and reported with one message. Value is 64.

9.3.1.200	Cell Portion ID
This IE gives the current Cell Portion associated with the target UE. The Cell Portion ID is the unique identifier for a cell portion within a cell.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Cell Portion ID
M

INTEGER (0..4095, …)


9.3.1.201	Pathloss Reference Information
This information element indicates a pathloss reference for transmission of UL SRS by a UE.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
CHOICE Pathloss Reference Signal
M



>SSB




>>PCI
M

INTEGER (0..1007)

>>SSB Index
O

INTEGER (0..63)

>DL-PRS




>>DL-PRS ID
M

INTEGER (0..255)

>>DL-PRS Resource Set ID
M

INTEGER (0..7)

>>DL PRS Resource ID
O

INTEGER (0..63)


9.3.1.202	SSB Information
This information element contains the SSB time/frequency information for the TRPs.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
SSB Information List

1


>SSB Information Item

1…<maxNoSSBs>


>SSB Configuration
M

SSB Time/Frequency Configuration 
9.3.1.203

>PCI
M

INTEGER (0..1007)


Range bound
Explanation
maxNoSSBs
Maximum no of SSBs for which the configuration can be provided. Value is 255.

9.3.1.203	SSB Time/Frequency Configuration 
This information element contains the time and frequency configuration of an SSB.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
SSB frequency
M

INTEGER (0..3279165)
ARFCN
SSB subcarrier spacing
M

ENUMERATED(kHz15, kHz30, kHz60, kHz120, kHz240,...)

SSB Transmit power
M

INTEGER (-60..50)
EPRE of SSS
SSB periodicity
M

ENUMERATED(ms5, ms10, ms20, ms40, ms80, ms160, …)

SSB half frame index
M

INTEGER(0..1)

SSB SFN offset
M

INTEGER(0..15)

CHOICE SSB Position in Burst
O



>Short




>>Short Bitmap


BIT STRING (SIZE(4))

>Medium




>>Medium Bitmap


BIT STRING (SIZE(8))

>Long




>>Long Bitmap


BIT STRING (SIZE(64))

SFN Initialisation Time
O

Relative Time 1900
9.3.1.183


9.3.1.204	Search Window Information
This information element contains search window information for the TRP.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Expected Propagation Delay
M

INTEGER 
(-3841..3841,…)

Indicates when the SRS is expected to arrive in time at the TRP relative to the UL RTOA Reference Time.
The UL RTOA Reference Time for a target SRS is defined as , where
-      is the SFN Initialisation Time 
-     , where  and  are the system frame number and the subframe number of the SRS, respectively.
Granularity 4Ts, where Ts=1/(15103 2048) seconds.
Centre of the search window.
Delay Uncertainty
M

INTEGER 
(1..246,…)

Indicates the uncertainty of the expected SRS arrival time at the TRP 
Granularity 4Ts, where Ts=1/(151032048) seconds.
Single-sided search window.

9.3.1.205	Extended gNB-DU Name
This IE provides extended human readable name of the gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
gNB-DU Name Visible
O

VisibleString (SIZE(1..150, …))

gNB-DU Name UTF8
O

UTF8String (SIZE(1..150, …))


9.3.1.206	Extended gNB-CU Name
This IE provides extended human readable name of the gNB-CU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
gNB-CU Name Visible
O

VisibleString (SIZE(1..150, …))

gNB-CU Name UTF8
O

UTF8String (SIZE(1..150, …))


9.3.1.207	F1-C Transfer Path
This IE indicates the transmission path of the F1-C traffic. 
IE/Group Name
Presence
Range
IE type and reference
Semantics description
F1-C Path NSA
M

ENUMERATED (lte, nr, both)
This IE indicates the transmission path of the F1-C traffic in EN-DC.

9.3.1.208	SFN Offset
This IE contains the time offset between an absolute time reference and the SFN0 start. The IE is calculated assuming that the SFN transmission started at the absolute time reference. The absolute time reference chosen is the 1980-01-06 T00:00:19 International Atomic Time (TAI).
IE/Group Name
Presence
Range
IE type and reference
Semantics description
SFN Time Offset
M

BIT STRING (SIZE(24))
Time offset in microseconds between the absolute time reference "1980-01-06 T00:00:19 International Atomic Time (TAI)” and the SFN0 start. The maximum usable value is (1024*10^4-1). Values higher than the maximum are discarded.

9.3.1.209	Transmission Stop Indicator
This IE indicates to stop the data transmission at gNB-DU side for an DRB not subject to DAPS Handover.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Transmission Stop Indicator
M

ENUMERATED (true, …)


9.3.1.210	Spatial Relation Information per SRS Resource 
This information element indicates a spatial relation for transmission of each UL SRS resource recommened by LMF.
IE/Group Name
Presence
Range
IE Type and Reference
Semantics Description
Spatial Relation per SRS Resource List 

1


> Spatial Relation per SRS Resource Item

1..<maxnoSRS-ResourcePerSet>


>CHOICE Reference Signal
M



>NZP CSI-RS




>>NZP CSI-RS Resource ID
M

INTEGER (0..191)

>SSB




>> NR PCI
M

INTEGER (0..1007)

>>SSB Index
O

INTEGER (0..63)

>SRS




>>SRS Resource ID
M

INTEGER (0..63)

>Positioning SRS




>> Positioning SRS Resource ID
M

INTEGER (0..63)

>DL-PRS




>>DL-PRS ID
M

INTEGER (0..255)

>>DL-PRS Resource Set ID
M

INTEGER (0..7)

>>DL-PRS Resource ID
O

INTEGER (0..63)


Range bound
Explanation
maxnoSRS-ResourcePerSet
Maximum no of SRS resources per SRS resource set. Value is 16.

9.3.2	Transport Network Layer Related IEs
9.3.2.1	UP Transport Layer Information
The UP Transport Layer Information IE identifies an F1 transport bearer associated to a DRB. It contains a Transport Layer Address and a GTP Tunnel Endpoint Identifier. The Transport Layer Address is an IP address to be used for the F1 user plane transport. The GTP Tunnel Endpoint Identifier is to be used for the user plane transport between gNB-CU and gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
CHOICE Transport Layer Information
M



>GTP Tunnel




>>Transport Layer Address
M

9.3.2.3

>>GTP-TEID
M

9.3.2.2


9.3.2.2	GTP-TEID
The GTP-TEID IE is the GTP Tunnel Endpoint Identifier to be used for the user plane transport between the gNB-CU and gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
GTP-TEID
M

OCTET STRING (SIZE(4))
For details and range, see TS 29.281 [18].

9.3.2.3	Transport Layer Address
This Transport Layer Address IE is an IP address.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Transport Layer Address
M

BIT STRING (SIZE(1..160, ...))
The Radio Network Layer is not supposed to interpret the address information. It should pass it to the Transport Layer for interpretation.
For details, see TS 38.414 [19].

9.3.2.4	CP Transport Layer Information
This IE is used to provide the F1 control plane transport layer information associated with a gNB-CU – gNB-DU.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
Criticality
Assigned Criticality
CHOICE CP Transport Layer Information




-

>Endpoint-IP-address




-

>> Endpoint IP address
M

Transport Layer Address 9.3.2.3

-

>Endpoint-IP-address-and-port




-

>> Endpoint IP address
M

Transport Layer Address 9.3.2.3

-

>> Port Number
M

BIT STRING (SIZE(16))

Yes
reject

9.3.2.5	Transport Layer Address Info
This IE is used for signalling TNL Configuration information for IPSec tunnel over which GTP traffic is transmitted.
IE/Group Name
Presence
Range
IE type and reference
Semantics description 
Transport UP Layer Address Info to Add List

0..1


>Transport UP Layer Address Info to Add Item

1..<maxnoofTLAs>


>>IP-Sec Transport Layer Address
M

Transport Layer Address
9.3.2.3
Transport Layer Address for IP-Sec endpoint.
>>GTP Transport   Layer Address To Add List

0..1


>>>GTP Transport Layer  Address To Add Item

1..<maxnoofGTPTLAs>


>>>>GTP Transport Layer Address Info
M

Transport Layer Address
9.3.2.3
GTP Transport Layer Address for GTP end-points.
Transport UP Layer Address Info to Remove List

0..1


>Transport UP Layer Address Info to Remove Item

1..<maxnoofTLAs>


>>IP-Sec Transport Layer Address
M

Transport Layer Address
9.3.2.3
Transport Layer Address for IP-Sec endpoint.
>>GTP Transport Layer Address To Remove List

0..1


>>>GTP Transport Layer Address To Remove Item

1..<maxnoofGTPTLAs>


>>>>GTP Transport Layer Address Info
M

Transport Layer Address
9.3.2.3
GTP Transport Layer Address for GTP end-points.

maxnoofTLAs
Maximum no. of F1 Transport Layer Address in the message. Value is 16.
maxnoofGTPTLAs
Maximum no. of F1 GTP Transport Layer Address for a GTP end-point in the message. Value is 16.

9.3.2.6	URI
This IE is an URI.
IE/Group Name
Presence
Range
IE type and reference
Semantics description
URI
M

VisibleString
String representing URI (Uniform Resource Identifier)

9.4	Message and Information Element Abstract Syntax (with ASN.1)
9.4.1	General
F1AP ASN.1 definition conforms to ITU-T Recommendation X.691 [5], ITU-T Recommendation X.680 [12] and ITU-T Recommendation X.681 [13].
The ASN.1 definition specifies the structure and content of F1AP messages. F1AP messages can contain any IEs specified in the object set definitions for that message without the order or number of occurrence being restricted by ASN.1. However, for this version of the standard, a sending entity shall construct an F1AP message according to the PDU definitions module and with the following additional rules:
-	IEs shall be ordered (in an IE container) in the order they appear in object set definitions.
-	Object set definitions specify how many times IEs may appear. An IE shall appear exactly once if the presence field in an object has value "mandatory". An IE may appear at most once if the presence field in an object has value "optional" or "conditional". If in a tabular format there is multiplicity specified for an IE (i.e., an IE list) then in the corresponding ASN.1 definition the list definition is separated into two parts. The first part defines an IE container list where the list elements reside. The second part defines list elements. The IE container list appears as an IE of its own. For this version of the standard an IE container list may contain only one kind of list elements.
NOTE:	In the above "IE" means an IE in the object set with an explicit ID. If one IE needs to appear more than once in one object set, then the different occurrences will have different IE IDs.
If an F1AP message that is not constructed as defined above is received, this shall be considered as Abstract Syntax Error, and the message shall be handled as defined for Abstract Syntax Error in clause 10.
9.4.2	Usage of private message mechanism for non-standard use
The private message mechanism for non-standard use may be used:
-	for special operator- (and/or vendor) specific features considered not to be part of the basic functionality, i.e., the functionality required for a complete and high-quality specification in order to guarantee multivendor interoperability;
-	by vendors for research purposes, e.g., to implement and evaluate new algorithms/features before such features are proposed for standardisation.
The private message mechanism shall not be used for basic functionality. Such functionality shall be standardised.
9.4.3	Elementary Procedure Definitions
-- ASN1START 
-- **************************************************************
--
-- Elementary Procedure definitions
--
-- **************************************************************

F1AP-PDU-Descriptions  { 
itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) 
ngran-access (22) modules (3) f1ap (3) version1 (1) f1ap-PDU-Descriptions (0)}

DEFINITIONS AUTOMATIC TAGS ::= 

BEGIN

-- **************************************************************
--
-- IE parameter types from other modules.
--
-- **************************************************************

IMPORTS
	Criticality,
	ProcedureCode

FROM F1AP-CommonDataTypes
	Reset,
	ResetAcknowledge,
	F1SetupRequest,
	F1SetupResponse,
	F1SetupFailure, 
	GNBDUConfigurationUpdate,
	GNBDUConfigurationUpdateAcknowledge,
	GNBDUConfigurationUpdateFailure,
	GNBCUConfigurationUpdate,
	GNBCUConfigurationUpdateAcknowledge,
	GNBCUConfigurationUpdateFailure,
	UEContextSetupRequest,
	UEContextSetupResponse,
	UEContextSetupFailure,
	UEContextReleaseCommand,
	UEContextReleaseComplete,
	UEContextModificationRequest,
	UEContextModificationResponse,
	UEContextModificationFailure,
	UEContextModificationRequired,
	UEContextModificationConfirm,
	ErrorIndication,
	UEContextReleaseRequest,
	DLRRCMessageTransfer,
	ULRRCMessageTransfer,
	GNBDUResourceCoordinationRequest,
	GNBDUResourceCoordinationResponse,
	PrivateMessage,
	UEInactivityNotification,
	InitialULRRCMessageTransfer,
	SystemInformationDeliveryCommand,
	Paging,
	Notify,
	WriteReplaceWarningRequest,
	WriteReplaceWarningResponse,
	PWSCancelRequest,
	PWSCancelResponse,
	PWSRestartIndication,
	PWSFailureIndication,
	GNBDUStatusIndication,
	RRCDeliveryReport,
	UEContextModificationRefuse,
	F1RemovalRequest,
	F1RemovalResponse,
	F1RemovalFailure,
	NetworkAccessRateReduction,
	TraceStart,
	DeactivateTrace,
	DUCURadioInformationTransfer,
	CUDURadioInformationTransfer,
	BAPMappingConfiguration,
	BAPMappingConfigurationAcknowledge,
	BAPMappingConfigurationFailure,
	GNBDUResourceConfiguration,
	GNBDUResourceConfigurationAcknowledge,
	GNBDUResourceConfigurationFailure,
	IABTNLAddressRequest,
	IABTNLAddressResponse,
	IABTNLAddressFailure,
	IABUPConfigurationUpdateRequest,
	IABUPConfigurationUpdateResponse,
	IABUPConfigurationUpdateFailure,
	ResourceStatusRequest,
	ResourceStatusResponse,
	ResourceStatusFailure,
	ResourceStatusUpdate,
	AccessAndMobilityIndication,
	ReferenceTimeInformationReportingControl,
	ReferenceTimeInformationReport,
	AccessSuccess,
	CellTrafficTrace,
	PositioningMeasurementRequest,
	PositioningMeasurementResponse,
	PositioningMeasurementFailure,
	PositioningAssistanceInformationControl,
	PositioningAssistanceInformationFeedback,
	PositioningMeasurementReport,
	PositioningMeasurementAbort,
	PositioningMeasurementFailureIndication,
	PositioningMeasurementUpdate,
	TRPInformationRequest,
	TRPInformationResponse,
	TRPInformationFailure,
	PositioningInformationRequest,
	PositioningInformationResponse,
	PositioningInformationFailure,
	PositioningActivationRequest,
	PositioningActivationResponse,
	PositioningActivationFailure,
	PositioningDeactivation,
	PositioningInformationUpdate,
	E-CIDMeasurementInitiationRequest,
	E-CIDMeasurementInitiationResponse,
	E-CIDMeasurementInitiationFailure,
	E-CIDMeasurementFailureIndication,
	E-CIDMeasurementReport,
	E-CIDMeasurementTerminationCommand



FROM F1AP-PDU-Contents
	id-Reset,
	id-F1Setup,
	id-gNBDUConfigurationUpdate,
	id-gNBCUConfigurationUpdate,
	id-UEContextSetup,
	id-UEContextRelease,
	id-UEContextModification,
	id-UEContextModificationRequired,
	id-ErrorIndication, 
	id-UEContextReleaseRequest,
	id-DLRRCMessageTransfer,
	id-ULRRCMessageTransfer,
	id-GNBDUResourceCoordination,
	id-privateMessage,
	id-UEInactivityNotification,
	id-InitialULRRCMessageTransfer,
	id-SystemInformationDeliveryCommand,
	id-Paging,
	id-Notify,
	id-WriteReplaceWarning,
	id-PWSCancel,
	id-PWSRestartIndication,
	id-PWSFailureIndication,
	id-GNBDUStatusIndication,
	id-RRCDeliveryReport,
	id-F1Removal,
	id-NetworkAccessRateReduction,
	id-TraceStart,
	id-DeactivateTrace,
	id-DUCURadioInformationTransfer,
	id-CUDURadioInformationTransfer,
	id-BAPMappingConfiguration,
	id-GNBDUResourceConfiguration,
	id-IABTNLAddressAllocation,
	id-IABUPConfigurationUpdate,
	id-resourceStatusReportingInitiation,
	id-resourceStatusReporting,
	id-accessAndMobilityIndication,
	id-ReferenceTimeInformationReportingControl,
	id-ReferenceTimeInformationReport,
	id-accessSuccess,
	id-cellTrafficTrace,
	id-PositioningMeasurementExchange,
	id-PositioningAssistanceInformationControl,
	id-PositioningAssistanceInformationFeedback,
	id-PositioningMeasurementReport,
	id-PositioningMeasurementAbort,
	id-PositioningMeasurementFailureIndication,
	id-PositioningMeasurementUpdate,
	id-TRPInformationExchange,
	id-PositioningInformationExchange,
	id-PositioningActivation,
	id-PositioningDeactivation,
	id-PositioningInformationUpdate,
	id-E-CIDMeasurementInitiation,
	id-E-CIDMeasurementFailureIndication,
	id-E-CIDMeasurementReport,
	id-E-CIDMeasurementTermination


FROM F1AP-Constants

	ProtocolIE-SingleContainer{},
	F1AP-PROTOCOL-IES

FROM F1AP-Containers;


-- **************************************************************
--
-- Interface Elementary Procedure Class
--
-- **************************************************************

F1AP-ELEMENTARY-PROCEDURE ::= CLASS {
	&InitiatingMessage				,
	&SuccessfulOutcome							OPTIONAL,
	&UnsuccessfulOutcome						OPTIONAL,
	&procedureCode				ProcedureCode 	UNIQUE,
	&criticality				Criticality 	DEFAULT ignore
}
WITH SYNTAX {
	INITIATING MESSAGE			&InitiatingMessage
	[SUCCESSFUL OUTCOME			&SuccessfulOutcome]
	[UNSUCCESSFUL OUTCOME		&UnsuccessfulOutcome]
	PROCEDURE CODE				&procedureCode
	[CRITICALITY				&criticality]
}

-- **************************************************************
--
-- Interface PDU Definition
--
-- **************************************************************

F1AP-PDU ::= CHOICE {
	initiatingMessage	InitiatingMessage,
	successfulOutcome	SuccessfulOutcome,
	unsuccessfulOutcome	UnsuccessfulOutcome, 
	choice-extension	ProtocolIE-SingleContainer { { F1AP-PDU-ExtIEs} }
}

F1AP-PDU-ExtIEs F1AP-PROTOCOL-IES ::= { -- this extension is not used
	...
}

InitiatingMessage ::= SEQUENCE {
	procedureCode	F1AP-ELEMENTARY-PROCEDURE.&procedureCode		({F1AP-ELEMENTARY-PROCEDURES}),
	criticality		F1AP-ELEMENTARY-PROCEDURE.&criticality			({F1AP-ELEMENTARY-PROCEDURES}{@procedureCode}),
	value			F1AP-ELEMENTARY-PROCEDURE.&InitiatingMessage	({F1AP-ELEMENTARY-PROCEDURES}{@procedureCode})
}

SuccessfulOutcome ::= SEQUENCE {
	procedureCode	F1AP-ELEMENTARY-PROCEDURE.&procedureCode		({F1AP-ELEMENTARY-PROCEDURES}),
	criticality		F1AP-ELEMENTARY-PROCEDURE.&criticality			({F1AP-ELEMENTARY-PROCEDURES}{@procedureCode}),
	value			F1AP-ELEMENTARY-PROCEDURE.&SuccessfulOutcome	({F1AP-ELEMENTARY-PROCEDURES}{@procedureCode})
}

UnsuccessfulOutcome ::= SEQUENCE {
	procedureCode	F1AP-ELEMENTARY-PROCEDURE.&procedureCode		({F1AP-ELEMENTARY-PROCEDURES}),
	criticality		F1AP-ELEMENTARY-PROCEDURE.&criticality			({F1AP-ELEMENTARY-PROCEDURES}{@procedureCode}),
	value			F1AP-ELEMENTARY-PROCEDURE.&UnsuccessfulOutcome	({F1AP-ELEMENTARY-PROCEDURES}{@procedureCode})
}

-- **************************************************************
--
-- Interface Elementary Procedure List
--
-- **************************************************************

F1AP-ELEMENTARY-PROCEDURES F1AP-ELEMENTARY-PROCEDURE ::= {
	F1AP-ELEMENTARY-PROCEDURES-CLASS-1			|
	F1AP-ELEMENTARY-PROCEDURES-CLASS-2,	
	...
}


F1AP-ELEMENTARY-PROCEDURES-CLASS-1 F1AP-ELEMENTARY-PROCEDURE ::= {
	reset							|
	f1Setup							|
	gNBDUConfigurationUpdate		|
	gNBCUConfigurationUpdate		|
	uEContextSetup					|
	uEContextRelease				|
	uEContextModification			|
	uEContextModificationRequired	|
	writeReplaceWarning				|
	pWSCancel					|
	gNBDUResourceCoordination		|
	f1Removal						|
	bAPMappingConfiguration			|
	gNBDUResourceConfiguration		|
	iABTNLAddressAllocation			|
	iABUPConfigurationUpdate		|
	resourceStatusReportingInitiation	|
	positioningMeasurementExchange	|
	tRPInformationExchange			|
	positioningInformationExchange	|
	positioningActivation			|
	e-CIDMeasurementInitiation,
	...
}

F1AP-ELEMENTARY-PROCEDURES-CLASS-2 F1AP-ELEMENTARY-PROCEDURE ::= {	
	errorIndication							|
	uEContextReleaseRequest					|
	dLRRCMessageTransfer					|
	uLRRCMessageTransfer					|
	uEInactivityNotification				|
	privateMessage							|
	initialULRRCMessageTransfer				|
	systemInformationDelivery				|
	paging									|
	notify									|
	pWSRestartIndication					|
	pWSFailureIndication					|
	gNBDUStatusIndication					|
	rRCDeliveryReport						|
	networkAccessRateReduction				|
	traceStart								|
	deactivateTrace							|
	dUCURadioInformationTransfer			|
	cUDURadioInformationTransfer			|
	resourceStatusReporting					|
	accessAndMobilityIndication				|
	referenceTimeInformationReportingControl|
	referenceTimeInformationReport			|
	accessSuccess							|
	cellTrafficTrace						|
	positioningAssistanceInformationControl		|
	positioningAssistanceInformationFeedback	|
	positioningMeasurementReport				|
	positioningMeasurementAbort					|
	positioningMeasurementFailureIndication		|
	positioningMeasurementUpdate				|
	positioningDeactivation						|
	e-CIDMeasurementFailureIndication			|
	e-CIDMeasurementReport						|
	e-CIDMeasurementTermination					|
	positioningInformationUpdate,
	...
}
-- **************************************************************
--
-- Interface Elementary Procedures
--
-- **************************************************************

reset F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		Reset
	SUCCESSFUL OUTCOME		ResetAcknowledge
	PROCEDURE CODE			id-Reset
	CRITICALITY				reject
}

f1Setup F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		F1SetupRequest
	SUCCESSFUL OUTCOME		F1SetupResponse
	UNSUCCESSFUL OUTCOME	F1SetupFailure
	PROCEDURE CODE			id-F1Setup
	CRITICALITY				reject
}

gNBDUConfigurationUpdate F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		GNBDUConfigurationUpdate
	SUCCESSFUL OUTCOME		GNBDUConfigurationUpdateAcknowledge
	UNSUCCESSFUL OUTCOME	GNBDUConfigurationUpdateFailure
	PROCEDURE CODE			id-gNBDUConfigurationUpdate
	CRITICALITY				reject
}

gNBCUConfigurationUpdate F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		GNBCUConfigurationUpdate
	SUCCESSFUL OUTCOME		GNBCUConfigurationUpdateAcknowledge
	UNSUCCESSFUL OUTCOME	GNBCUConfigurationUpdateFailure
	PROCEDURE CODE			id-gNBCUConfigurationUpdate
	CRITICALITY				reject
}

uEContextSetup F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		UEContextSetupRequest
	SUCCESSFUL OUTCOME		UEContextSetupResponse
	UNSUCCESSFUL OUTCOME	UEContextSetupFailure
	PROCEDURE CODE			id-UEContextSetup
	CRITICALITY				reject
}

uEContextRelease F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		UEContextReleaseCommand
	SUCCESSFUL OUTCOME		UEContextReleaseComplete
	PROCEDURE CODE			id-UEContextRelease
	CRITICALITY				reject
}

uEContextModification F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		UEContextModificationRequest
	SUCCESSFUL OUTCOME		UEContextModificationResponse
	UNSUCCESSFUL OUTCOME	UEContextModificationFailure
	PROCEDURE CODE			id-UEContextModification
	CRITICALITY				reject
}

uEContextModificationRequired F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		UEContextModificationRequired
	SUCCESSFUL OUTCOME		UEContextModificationConfirm
	UNSUCCESSFUL OUTCOME	UEContextModificationRefuse
	PROCEDURE CODE			id-UEContextModificationRequired
	CRITICALITY				reject
}

writeReplaceWarning F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		WriteReplaceWarningRequest
	SUCCESSFUL OUTCOME		WriteReplaceWarningResponse
	PROCEDURE CODE			id-WriteReplaceWarning
	CRITICALITY				reject
}

pWSCancel F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PWSCancelRequest
	SUCCESSFUL OUTCOME		PWSCancelResponse
	PROCEDURE CODE			id-PWSCancel
	CRITICALITY				reject
}

errorIndication F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		ErrorIndication
	PROCEDURE CODE			id-ErrorIndication
	CRITICALITY				ignore
}

uEContextReleaseRequest F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		UEContextReleaseRequest
	PROCEDURE CODE			id-UEContextReleaseRequest
	CRITICALITY				ignore
}


initialULRRCMessageTransfer F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		InitialULRRCMessageTransfer
	PROCEDURE CODE			id-InitialULRRCMessageTransfer
	CRITICALITY				ignore
}

dLRRCMessageTransfer F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		DLRRCMessageTransfer
	PROCEDURE CODE			id-DLRRCMessageTransfer
	CRITICALITY				ignore
}

uLRRCMessageTransfer F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		ULRRCMessageTransfer
	PROCEDURE CODE			id-ULRRCMessageTransfer
	CRITICALITY				ignore
}


uEInactivityNotification  F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		UEInactivityNotification
	PROCEDURE CODE			id-UEInactivityNotification
	CRITICALITY				ignore
}

gNBDUResourceCoordination F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		GNBDUResourceCoordinationRequest
	SUCCESSFUL OUTCOME		GNBDUResourceCoordinationResponse
	PROCEDURE CODE			id-GNBDUResourceCoordination
	CRITICALITY				reject
}

privateMessage F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PrivateMessage
	PROCEDURE CODE			id-privateMessage
	CRITICALITY				ignore
}

systemInformationDelivery F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		SystemInformationDeliveryCommand
	PROCEDURE CODE			id-SystemInformationDeliveryCommand
	CRITICALITY				ignore
}


paging F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		Paging
	PROCEDURE CODE			id-Paging
	CRITICALITY				ignore
}

notify F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		Notify
	PROCEDURE CODE			id-Notify
	CRITICALITY				ignore
}

networkAccessRateReduction F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		NetworkAccessRateReduction
	PROCEDURE CODE			id-NetworkAccessRateReduction
	CRITICALITY				ignore
}


pWSRestartIndication F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PWSRestartIndication
	PROCEDURE CODE			id-PWSRestartIndication
	CRITICALITY				ignore
}

pWSFailureIndication F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PWSFailureIndication
	PROCEDURE CODE			id-PWSFailureIndication
	CRITICALITY				ignore
}

gNBDUStatusIndication 	F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		GNBDUStatusIndication
	PROCEDURE CODE			id-GNBDUStatusIndication
	CRITICALITY				ignore
}


rRCDeliveryReport F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		RRCDeliveryReport
	PROCEDURE CODE			id-RRCDeliveryReport
	CRITICALITY				ignore
}

f1Removal F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		F1RemovalRequest
	SUCCESSFUL OUTCOME		F1RemovalResponse
	UNSUCCESSFUL OUTCOME	F1RemovalFailure
	PROCEDURE CODE			id-F1Removal
	CRITICALITY				reject
}

traceStart F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		TraceStart
	PROCEDURE CODE			id-TraceStart
	CRITICALITY				ignore
}

deactivateTrace F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		DeactivateTrace
	PROCEDURE CODE			id-DeactivateTrace
	CRITICALITY				ignore
}

dUCURadioInformationTransfer F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		DUCURadioInformationTransfer
	PROCEDURE CODE			id-DUCURadioInformationTransfer
	CRITICALITY				ignore
}

cUDURadioInformationTransfer F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		CUDURadioInformationTransfer
	PROCEDURE CODE			id-CUDURadioInformationTransfer
	CRITICALITY				ignore
}

bAPMappingConfiguration F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		BAPMappingConfiguration
	SUCCESSFUL OUTCOME		BAPMappingConfigurationAcknowledge
	UNSUCCESSFUL OUTCOME	BAPMappingConfigurationFailure
	PROCEDURE CODE			id-BAPMappingConfiguration
	CRITICALITY				reject
}

gNBDUResourceConfiguration F1AP-ELEMENTARY-PROCEDURE ::= { 
	INITIATING MESSAGE		GNBDUResourceConfiguration
	SUCCESSFUL OUTCOME		GNBDUResourceConfigurationAcknowledge
	UNSUCCESSFUL OUTCOME	GNBDUResourceConfigurationFailure
	PROCEDURE CODE			id-GNBDUResourceConfiguration
	CRITICALITY				reject
}

iABTNLAddressAllocation F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		IABTNLAddressRequest
	SUCCESSFUL OUTCOME		IABTNLAddressResponse
	UNSUCCESSFUL OUTCOME	IABTNLAddressFailure
	PROCEDURE CODE			id-IABTNLAddressAllocation
	CRITICALITY				reject
}

iABUPConfigurationUpdate F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		IABUPConfigurationUpdateRequest
	SUCCESSFUL OUTCOME		IABUPConfigurationUpdateResponse
	UNSUCCESSFUL OUTCOME	IABUPConfigurationUpdateFailure
	PROCEDURE CODE			id-IABUPConfigurationUpdate
	CRITICALITY				reject
}

resourceStatusReportingInitiation F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		ResourceStatusRequest
	SUCCESSFUL OUTCOME		ResourceStatusResponse
	UNSUCCESSFUL OUTCOME	ResourceStatusFailure
	PROCEDURE CODE			id-resourceStatusReportingInitiation
	CRITICALITY				reject
}

resourceStatusReporting F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		ResourceStatusUpdate
	PROCEDURE CODE			id-resourceStatusReporting
	CRITICALITY				ignore
}

accessAndMobilityIndication F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		AccessAndMobilityIndication
	PROCEDURE CODE			id-accessAndMobilityIndication
	CRITICALITY				ignore
}

referenceTimeInformationReportingControl F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		ReferenceTimeInformationReportingControl
	PROCEDURE CODE			id-ReferenceTimeInformationReportingControl
	CRITICALITY				ignore
}

referenceTimeInformationReport F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		ReferenceTimeInformationReport
	PROCEDURE CODE			id-ReferenceTimeInformationReport
	CRITICALITY				ignore
}

accessSuccess F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		AccessSuccess
	PROCEDURE CODE			id-accessSuccess
	CRITICALITY				ignore
}

cellTrafficTrace F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		CellTrafficTrace
	PROCEDURE CODE			id-cellTrafficTrace
	CRITICALITY				ignore
}

positioningAssistanceInformationControl F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningAssistanceInformationControl
	PROCEDURE CODE			id-PositioningAssistanceInformationControl
	CRITICALITY				ignore
}

positioningAssistanceInformationFeedback F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningAssistanceInformationFeedback
	PROCEDURE CODE			id-PositioningAssistanceInformationFeedback
	CRITICALITY				ignore
}

positioningMeasurementExchange F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningMeasurementRequest
	SUCCESSFUL OUTCOME		PositioningMeasurementResponse
	UNSUCCESSFUL OUTCOME	PositioningMeasurementFailure
	PROCEDURE CODE			id-PositioningMeasurementExchange
	CRITICALITY				reject
}

positioningMeasurementReport F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningMeasurementReport
	PROCEDURE CODE			id-PositioningMeasurementReport
	CRITICALITY				ignore
}

positioningMeasurementAbort F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningMeasurementAbort
	PROCEDURE CODE			id-PositioningMeasurementAbort
	CRITICALITY				ignore
}

positioningMeasurementFailureIndication F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningMeasurementFailureIndication
	PROCEDURE CODE			id-PositioningMeasurementFailureIndication
	CRITICALITY				ignore
}

positioningMeasurementUpdate F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningMeasurementUpdate
	PROCEDURE CODE			id-PositioningMeasurementUpdate
	CRITICALITY				ignore
}


tRPInformationExchange F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		TRPInformationRequest
	SUCCESSFUL OUTCOME		TRPInformationResponse
	UNSUCCESSFUL OUTCOME	TRPInformationFailure
	PROCEDURE CODE			id-TRPInformationExchange
	CRITICALITY				reject
}

positioningInformationExchange F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningInformationRequest
	SUCCESSFUL OUTCOME		PositioningInformationResponse
	UNSUCCESSFUL OUTCOME	PositioningInformationFailure
	PROCEDURE CODE			id-PositioningInformationExchange
	CRITICALITY				reject
}

positioningActivation F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningActivationRequest
	SUCCESSFUL OUTCOME		PositioningActivationResponse
	UNSUCCESSFUL OUTCOME	PositioningActivationFailure
	PROCEDURE CODE			id-PositioningActivation
	CRITICALITY				reject
}

positioningDeactivation F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningDeactivation
	PROCEDURE CODE			id-PositioningDeactivation
	CRITICALITY				ignore
}

e-CIDMeasurementInitiation F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		E-CIDMeasurementInitiationRequest
	SUCCESSFUL OUTCOME		E-CIDMeasurementInitiationResponse
	UNSUCCESSFUL OUTCOME	E-CIDMeasurementInitiationFailure
	PROCEDURE CODE			id-E-CIDMeasurementInitiation
	CRITICALITY				reject
}

e-CIDMeasurementFailureIndication F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		E-CIDMeasurementFailureIndication
	PROCEDURE CODE			id-E-CIDMeasurementFailureIndication
	CRITICALITY				ignore
}

e-CIDMeasurementReport F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		E-CIDMeasurementReport
	PROCEDURE CODE			id-E-CIDMeasurementReport
	CRITICALITY				ignore
}

e-CIDMeasurementTermination F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		E-CIDMeasurementTerminationCommand
	PROCEDURE CODE			id-E-CIDMeasurementTermination
	CRITICALITY				ignore
}

positioningInformationUpdate F1AP-ELEMENTARY-PROCEDURE ::= {
	INITIATING MESSAGE		PositioningInformationUpdate
	PROCEDURE CODE			id-PositioningInformationUpdate
	CRITICALITY				ignore
}


END
-- ASN1STOP 

9.4.4	PDU Definitions
-- ASN1START 
-- **************************************************************
--
-- PDU definitions for F1AP.
--
-- **************************************************************

F1AP-PDU-Contents { 
itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) 
ngran-access (22) modules (3) f1ap (3) version1 (1) f1ap-PDU-Contents (1) }

DEFINITIONS AUTOMATIC TAGS ::= 

BEGIN

-- **************************************************************
--
-- IE parameter types from other modules.
--
-- **************************************************************

IMPORTS
	Candidate-SpCell-Item,
	Cause,
	Cells-Failed-to-be-Activated-List-Item,
	Cells-Status-Item,
	Cells-to-be-Activated-List-Item,
	Cells-to-be-Deactivated-List-Item, 
	CellULConfigured,
	CriticalityDiagnostics, 
	C-RNTI,
	CUtoDURRCInformation, 
	DRB-Activity-Item,
	DRBID,
	DRBs-FailedToBeModified-Item,
	DRBs-FailedToBeSetup-Item,
	DRBs-FailedToBeSetupMod-Item,
	DRB-Notify-Item,
	DRBs-ModifiedConf-Item,
	DRBs-Modified-Item,
	DRBs-Required-ToBeModified-Item,
	DRBs-Required-ToBeReleased-Item,
	DRBs-Setup-Item,
	DRBs-SetupMod-Item,
	DRBs-ToBeModified-Item,
	DRBs-ToBeReleased-Item,
	DRBs-ToBeSetup-Item,
	DRBs-ToBeSetupMod-Item,
	DRXCycle,
	DRXConfigurationIndicator,
	DUtoCURRCInformation,
	EUTRANQoS,
	ExecuteDuplication,
	FullConfiguration,
	GNB-CU-UE-F1AP-ID,
	GNB-DU-UE-F1AP-ID,
	GNB-DU-ID,
	GNB-DU-Served-Cells-Item,
	GNB-DU-System-Information, 
	GNB-CU-Name,
	GNB-DU-Name,
	InactivityMonitoringRequest,
	InactivityMonitoringResponse,
	LowerLayerPresenceStatusChange,
	NotificationControl,
	NRCGI,
	NRPCI,
	UEContextNotRetrievable,
	Potential-SpCell-Item,
	RAT-FrequencyPriorityInformation,
	RequestedSRSTransmissionCharacteristics,
	ResourceCoordinationTransferContainer,
	RRCContainer,
	RRCContainer-RRCSetupComplete,
	RRCReconfigurationCompleteIndicator,
	SCellIndex,
	SCell-ToBeRemoved-Item,
	SCell-ToBeSetup-Item,
	SCell-ToBeSetupMod-Item,
	SCell-FailedtoSetup-Item,
	SCell-FailedtoSetupMod-Item, 
	ServCellIndex,
	Served-Cell-Information,
	Served-Cells-To-Add-Item,
	Served-Cells-To-Delete-Item,
	Served-Cells-To-Modify-Item,
	ServingCellMO,
	SRBID,
	SRBs-FailedToBeSetup-Item,
	SRBs-FailedToBeSetupMod-Item,
	SRBs-Required-ToBeReleased-Item,
	SRBs-ToBeReleased-Item,
	SRBs-ToBeSetup-Item,
	SRBs-ToBeSetupMod-Item,
	SRBs-Modified-Item,
	SRBs-Setup-Item,
	SRBs-SetupMod-Item,
	TimeToWait,
	TransactionID,
	TransmissionActionIndicator,
	UE-associatedLogicalF1-ConnectionItem,
	DUtoCURRCContainer,
	PagingCell-Item, 
	SItype-List,
	UEIdentityIndexValue,
	GNB-CU-TNL-Association-Setup-Item,
	GNB-CU-TNL-Association-Failed-To-Setup-Item,
	GNB-CU-TNL-Association-To-Add-Item,
	GNB-CU-TNL-Association-To-Remove-Item,
	GNB-CU-TNL-Association-To-Update-Item,
	MaskedIMEISV,
	PagingDRX,
	PagingPriority,
	PagingIdentity,
	Cells-to-be-Barred-Item,
	PWSSystemInformation,
	Broadcast-To-Be-Cancelled-Item,
	Cells-Broadcast-Cancelled-Item,
	NR-CGI-List-For-Restart-Item,
	PWS-Failed-NR-CGI-Item,
	RepetitionPeriod,
	NumberofBroadcastRequest,
	Cells-To-Be-Broadcast-Item,
	Cells-Broadcast-Completed-Item,
	Cancel-all-Warning-Messages-Indicator,
	EUTRA-NR-CellResourceCoordinationReq-Container,
	EUTRA-NR-CellResourceCoordinationReqAck-Container,
	RequestType,
	PLMN-Identity,
	RLCFailureIndication, 
	UplinkTxDirectCurrentListInformation,
	SULAccessIndication,
	Protected-EUTRA-Resources-Item,
	GNB-DUConfigurationQuery,
	BitRate,
	RRC-Version,
	GNBDUOverloadInformation,
	RRCDeliveryStatusRequest,
	NeedforGap,
	RRCDeliveryStatus,
	ResourceCoordinationTransferInformation,
	Dedicated-SIDelivery-NeededUE-Item,
	Associated-SCell-Item,
	IgnoreResourceCoordinationContainer,
	PagingOrigin,
	UAC-Assistance-Info,
	RANUEID,
	GNB-DU-TNL-Association-To-Remove-Item,
	NotificationInformation,
	TraceActivation,
	TraceID,
	Neighbour-Cell-Information-Item,
	SymbolAllocInSlot,
	NumDLULSymbols,
	AdditionalRRMPriorityIndex,
	DUCURadioInformationType,
	CUDURadioInformationType,
	Transport-Layer-Address-Info,
	BHChannels-ToBeSetup-Item,
	BHChannels-Setup-Item,
	BHChannels-FailedToBeSetup-Item,
	BHChannels-ToBeModified-Item,
	BHChannels-ToBeReleased-Item,
	BHChannels-ToBeSetupMod-Item,
	BHChannels-FailedToBeModified-Item,
	BHChannels-FailedToBeSetupMod-Item,
	BHChannels-Modified-Item,
	BHChannels-SetupMod-Item,
	BHChannels-Required-ToBeReleased-Item,
	BAPAddress,
	BAPPathID,
	BAPRoutingID,
	BH-Routing-Information-Added-List-Item,
	BH-Routing-Information-Removed-List-Item,
	Child-Nodes-List,
	Child-Nodes-List-Item,
	Child-Node-Cells-List,
	Child-Node-Cells-List-Item,
	Activated-Cells-to-be-Updated-List,
	Activated-Cells-to-be-Updated-List-Item,
	UL-BH-Non-UP-Traffic-Mapping,
	IABTNLAddressesRequested,
	IABIPv6RequestType,
	IAB-TNL-Addresses-To-Remove-Item,
	IABTNLAddress,
	IAB-Allocated-TNL-Address-Item,
	IABv4AddressesRequested,
	TrafficMappingInfo,
	UL-UP-TNL-Information-to-Update-List-Item,
	UL-UP-TNL-Address-to-Update-List-Item,
	DL-UP-TNL-Address-to-Update-List-Item,
	NRV2XServicesAuthorized,
	LTEV2XServicesAuthorized,
	NRUESidelinkAggregateMaximumBitrate,
	LTEUESidelinkAggregateMaximumBitrate,
	SLDRBs-SetupMod-Item,
	SLDRBs-ModifiedConf-Item,
	SLDRBID,
	SLDRBs-FailedToBeModified-Item,
	SLDRBs-FailedToBeSetup-Item,
	SLDRBs-FailedToBeSetupMod-Item,
	SLDRBs-Modified-Item,
	SLDRBs-Required-ToBeModified-Item,
	SLDRBs-Required-ToBeReleased-Item,
	SLDRBs-Setup-Item,
	SLDRBs-ToBeModified-Item,
	SLDRBs-ToBeReleased-Item,
	SLDRBs-ToBeSetup-Item,
	SLDRBs-ToBeSetupMod-Item,
	GNBCUMeasurementID,
	GNBDUMeasurementID,
	RegistrationRequest,
	ReportCharacteristics,
	CellToReportList,
	HardwareLoadIndicator,
	CellMeasurementResultList,
	ReportingPeriodicity,
	TNLCapacityIndicator,
	RACHReportInformationList,
	RLFReportInformationList,
	ReportingRequestType,
	TimeReferenceInformation,
	ConditionalInterDUMobilityInformation,
	ConditionalIntraDUMobilityInformation,
	TargetCellList,
	MDTPLMNList,
	PrivacyIndicator,
	TransportLayerAddress,
	URI-address,
	NID,
	PosAssistance-Information,
	PosBroadcast,
	PositioningBroadcastCells,
	RoutingID,
	PosAssistanceInformationFailureList,
	PosMeasurementQuantities,
	PosMeasurementResultList,
	PosReportCharacteristics,
	TRPInformationTypeItem,
	TRPInformationItem,
	LMF-MeasurementID,
	RAN-MeasurementID,
	SRSResourceSetID,
	SpatialRelationInfo,
	SRSResourceTrigger,
	SRSConfiguration,
	TRPList,
	E-CID-MeasurementQuantities,
	MeasurementPeriodicity,
	E-CID-MeasurementResult,
	Cell-Portion-ID,
	LMF-UE-MeasurementID,
	RAN-UE-MeasurementID,
	RelativeTime1900,
	SystemFrameNumber,
	SlotNumber,
	AbortTransmission,
	TRP-MeasurementRequestList,
	MeasurementBeamInfoRequest,
	E-CID-ReportCharacteristics,
	Extended-GNB-CU-Name,
	Extended-GNB-DU-Name,
	F1CTransferPath,
	SCGIndicator,
	SpatialRelationPerSRSResource,
	MeasurementPeriodicityExtended



FROM F1AP-IEs

	PrivateIE-Container{},
	ProtocolExtensionContainer{},
	ProtocolIE-Container{},
	ProtocolIE-ContainerPair{},
	ProtocolIE-SingleContainer{},
	F1AP-PRIVATE-IES,
	F1AP-PROTOCOL-EXTENSION,
	F1AP-PROTOCOL-IES,
	F1AP-PROTOCOL-IES-PAIR

FROM F1AP-Containers

	id-Candidate-SpCell-Item,
	id-Candidate-SpCell-List,
	id-Cause,
	id-Cancel-all-Warning-Messages-Indicator,
	id-Cells-Failed-to-be-Activated-List,
	id-Cells-Failed-to-be-Activated-List-Item, 
	id-Cells-Status-Item,
	id-Cells-Status-List,
	id-Cells-to-be-Activated-List,
	id-Cells-to-be-Activated-List-Item,
	id-Cells-to-be-Deactivated-List,
	id-Cells-to-be-Deactivated-List-Item,
	id-ConfirmedUEID,
	id-CriticalityDiagnostics,
	id-C-RNTI,
	id-CUtoDURRCInformation,
	id-DRB-Activity-Item,
	id-DRB-Activity-List,
	id-DRBs-FailedToBeModified-Item,
	id-DRBs-FailedToBeModified-List,
	id-DRBs-FailedToBeSetup-Item,
	id-DRBs-FailedToBeSetup-List,
	id-DRBs-FailedToBeSetupMod-Item,
	id-DRBs-FailedToBeSetupMod-List,
	id-DRBs-ModifiedConf-Item,
	id-DRBs-ModifiedConf-List,
	id-DRBs-Modified-Item,
	id-DRBs-Modified-List,
	id-DRB-Notify-Item,
	id-DRB-Notify-List,
	id-DRBs-Required-ToBeModified-Item,
	id-DRBs-Required-ToBeModified-List,
	id-DRBs-Required-ToBeReleased-Item,
	id-DRBs-Required-ToBeReleased-List,
	id-DRBs-Setup-Item,
	id-DRBs-Setup-List,
	id-DRBs-SetupMod-Item,
	id-DRBs-SetupMod-List,
	id-DRBs-ToBeModified-Item,
	id-DRBs-ToBeModified-List,
	id-DRBs-ToBeReleased-Item,
	id-DRBs-ToBeReleased-List,
	id-DRBs-ToBeSetup-Item,
	id-DRBs-ToBeSetup-List,
	id-DRBs-ToBeSetupMod-Item,
	id-DRBs-ToBeSetupMod-List,
	id-DRXCycle,
	id-DUtoCURRCInformation,
	id-ExecuteDuplication,
	id-FullConfiguration,
	id-gNB-CU-UE-F1AP-ID,
	id-gNB-DU-UE-F1AP-ID,
	id-gNB-DU-ID,
	id-GNB-DU-Served-Cells-Item,
	id-gNB-DU-Served-Cells-List, 
	id-gNB-CU-Name,
	id-gNB-DU-Name,
	id-Extended-GNB-CU-Name,
	id-Extended-GNB-DU-Name,
	id-InactivityMonitoringRequest,
	id-InactivityMonitoringResponse,
	id-new-gNB-CU-UE-F1AP-ID,
	id-new-gNB-DU-UE-F1AP-ID,
	id-oldgNB-DU-UE-F1AP-ID,
	id-PLMNAssistanceInfoForNetShar,
	id-Potential-SpCell-Item,
	id-Potential-SpCell-List,
	id-RAT-FrequencyPriorityInformation, 
	id-RedirectedRRCmessage,
	id-ResetType,
	id-RequestedSRSTransmissionCharacteristics,
	id-ResourceCoordinationTransferContainer,
	id-RRCContainer,
	id-RRCContainer-RRCSetupComplete,
	id-RRCReconfigurationCompleteIndicator,
	id-SCell-FailedtoSetup-List,
	id-SCell-FailedtoSetup-Item,
	id-SCell-FailedtoSetupMod-List,
	id-SCell-FailedtoSetupMod-Item,
	id-SCell-ToBeRemoved-Item,
	id-SCell-ToBeRemoved-List,
	id-SCell-ToBeSetup-Item,
	id-SCell-ToBeSetup-List,
	id-SCell-ToBeSetupMod-Item,
	id-SCell-ToBeSetupMod-List,
	id-SelectedPLMNID,
	id-Served-Cells-To-Add-Item,
	id-Served-Cells-To-Add-List,
	id-Served-Cells-To-Delete-Item,
	id-Served-Cells-To-Delete-List,
	id-Served-Cells-To-Modify-Item,
	id-Served-Cells-To-Modify-List,
	id-ServCellIndex,
	id-ServingCellMO,
	id-SpCell-ID,
	id-SpCellULConfigured,
	id-SRBID,
	id-SRBs-FailedToBeSetup-Item,
	id-SRBs-FailedToBeSetup-List,
	id-SRBs-FailedToBeSetupMod-Item,
	id-SRBs-FailedToBeSetupMod-List,
	id-SRBs-Required-ToBeReleased-Item,
	id-SRBs-Required-ToBeReleased-List,
	id-SRBs-ToBeReleased-Item,
	id-SRBs-ToBeReleased-List, 
	id-SRBs-ToBeSetup-Item,
	id-SRBs-ToBeSetup-List,
	id-SRBs-ToBeSetupMod-Item,
	id-SRBs-ToBeSetupMod-List,
	id-SRBs-Modified-Item,
	id-SRBs-Modified-List,
	id-SRBs-Setup-Item,
	id-SRBs-Setup-List,
	id-SRBs-SetupMod-Item,
	id-SRBs-SetupMod-List,
	id-TimeToWait,
	id-TransactionID,
	id-TransmissionActionIndicator, 
	id-UEContextNotRetrievable,
	id-UE-associatedLogicalF1-ConnectionItem,
	id-UE-associatedLogicalF1-ConnectionListResAck,
	id-DUtoCURRCContainer,
	id-NRCGI,
	id-PagingCell-Item,
	id-PagingCell-List,
	id-PagingDRX,
	id-PagingPriority,
	id-SItype-List,
	id-UEIdentityIndexValue,
	id-GNB-CU-TNL-Association-Setup-List,
	id-GNB-CU-TNL-Association-Setup-Item,
	id-GNB-CU-TNL-Association-Failed-To-Setup-List,
	id-GNB-CU-TNL-Association-Failed-To-Setup-Item,
	id-GNB-CU-TNL-Association-To-Add-Item,
	id-GNB-CU-TNL-Association-To-Add-List,
	id-GNB-CU-TNL-Association-To-Remove-Item,
	id-GNB-CU-TNL-Association-To-Remove-List,
	id-GNB-CU-TNL-Association-To-Update-Item,
	id-GNB-CU-TNL-Association-To-Update-List,
	id-MaskedIMEISV,
	id-PagingIdentity,
	id-Cells-to-be-Barred-List,
	id-Cells-to-be-Barred-Item,
	id-PWSSystemInformation,
	id-RepetitionPeriod,
	id-NumberofBroadcastRequest,
	id-Cells-To-Be-Broadcast-List,
	id-Cells-To-Be-Broadcast-Item,
	id-Cells-Broadcast-Completed-List,
	id-Cells-Broadcast-Completed-Item,
	id-Broadcast-To-Be-Cancelled-List,
	id-Broadcast-To-Be-Cancelled-Item,
	id-Cells-Broadcast-Cancelled-List,
	id-Cells-Broadcast-Cancelled-Item,
	id-NR-CGI-List-For-Restart-List,
	id-NR-CGI-List-For-Restart-Item,
	id-PWS-Failed-NR-CGI-List,
	id-PWS-Failed-NR-CGI-Item,
	id-EUTRA-NR-CellResourceCoordinationReq-Container,
	id-EUTRA-NR-CellResourceCoordinationReqAck-Container,
	id-Protected-EUTRA-Resources-List,
	id-RequestType,
	id-ServingPLMN,
	id-DRXConfigurationIndicator,
	id-RLCFailureIndication,
	id-UplinkTxDirectCurrentListInformation,
	id-SULAccessIndication,
	id-Protected-EUTRA-Resources-Item,
	id-GNB-DUConfigurationQuery,
	id-GNB-DU-UE-AMBR-UL,
	id-GNB-CU-RRC-Version,
	id-GNB-DU-RRC-Version,
	id-GNBDUOverloadInformation,
	id-NeedforGap,
	id-RRCDeliveryStatusRequest,
	id-RRCDeliveryStatus,
	id-Dedicated-SIDelivery-NeededUE-List,
	id-Dedicated-SIDelivery-NeededUE-Item,
	id-ResourceCoordinationTransferInformation,
	id-Associated-SCell-List,
	id-Associated-SCell-Item,
	id-IgnoreResourceCoordinationContainer,
	id-UAC-Assistance-Info,
	id-RANUEID,
	id-PagingOrigin,
	id-GNB-DU-TNL-Association-To-Remove-Item,
	id-GNB-DU-TNL-Association-To-Remove-List,
	id-NotificationInformation,
	id-TraceActivation,
	id-TraceID,
	id-Neighbour-Cell-Information-List,
	id-Neighbour-Cell-Information-Item,
	id-SymbolAllocInSlot,
	id-NumDLULSymbols,
	id-AdditionalRRMPriorityIndex,
	id-DUCURadioInformationType,
	id-CUDURadioInformationType,
	id-LowerLayerPresenceStatusChange,
	id-Transport-Layer-Address-Info,
	id-BHChannels-ToBeSetup-List,
	id-BHChannels-ToBeSetup-Item,
	id-BHChannels-Setup-List,
	id-BHChannels-Setup-Item,
	id-BHChannels-ToBeModified-Item,
	id-BHChannels-ToBeModified-List,
	id-BHChannels-ToBeReleased-Item,
	id-BHChannels-ToBeReleased-List,
	id-BHChannels-ToBeSetupMod-Item,
	id-BHChannels-ToBeSetupMod-List,
	id-BHChannels-FailedToBeSetup-Item,
	id-BHChannels-FailedToBeSetup-List,
	id-BHChannels-FailedToBeModified-Item,
	id-BHChannels-FailedToBeModified-List,
	id-BHChannels-FailedToBeSetupMod-Item,
	id-BHChannels-FailedToBeSetupMod-List,
	id-BHChannels-Modified-Item,
	id-BHChannels-Modified-List,
	id-BHChannels-SetupMod-Item,
	id-BHChannels-SetupMod-List,
	id-BHChannels-Required-ToBeReleased-Item,
	id-BHChannels-Required-ToBeReleased-List,
	id-BAPAddress,
	id-ConfiguredBAPAddress,
	id-BH-Routing-Information-Added-List,
	id-BH-Routing-Information-Added-List-Item,
	id-BH-Routing-Information-Removed-List,
	id-BH-Routing-Information-Removed-List-Item,
	id-UL-BH-Non-UP-Traffic-Mapping,
	id-Child-Nodes-List,
	id-Activated-Cells-to-be-Updated-List, 
	id-IABIPv6RequestType,
	id-IAB-TNL-Addresses-To-Remove-List,
	id-IAB-TNL-Addresses-To-Remove-Item,
	id-IAB-Allocated-TNL-Address-List,
	id-IAB-Allocated-TNL-Address-Item,
	id-IABv4AddressesRequested,
	id-TrafficMappingInformation,
	id-UL-UP-TNL-Information-to-Update-List,
	id-UL-UP-TNL-Information-to-Update-List-Item,
	id-UL-UP-TNL-Address-to-Update-List,
	id-UL-UP-TNL-Address-to-Update-List-Item,
	id-DL-UP-TNL-Address-to-Update-List,
	id-DL-UP-TNL-Address-to-Update-List-Item,
	id-NRV2XServicesAuthorized,
	id-LTEV2XServicesAuthorized,
	id-NRUESidelinkAggregateMaximumBitrate,
	id-LTEUESidelinkAggregateMaximumBitrate,
	id-PC5LinkAMBR,
	id-SLDRBs-FailedToBeModified-Item,
	id-SLDRBs-FailedToBeModified-List,
	id-SLDRBs-FailedToBeSetup-Item,
	id-SLDRBs-FailedToBeSetup-List,
	id-SLDRBs-Modified-Item,
	id-SLDRBs-Modified-List,
	id-SLDRBs-Required-ToBeModified-Item,
	id-SLDRBs-Required-ToBeModified-List,
	id-SLDRBs-Required-ToBeReleased-Item,
	id-SLDRBs-Required-ToBeReleased-List,
	id-SLDRBs-Setup-Item,
	id-SLDRBs-Setup-List,
	id-SLDRBs-ToBeModified-Item,
	id-SLDRBs-ToBeModified-List,
	id-SLDRBs-ToBeReleased-Item,
	id-SLDRBs-ToBeReleased-List,
	id-SLDRBs-ToBeSetup-Item,
	id-SLDRBs-ToBeSetup-List,
	id-SLDRBs-ToBeSetupMod-Item,
	id-SLDRBs-ToBeSetupMod-List,
	id-SLDRBs-SetupMod-List,
	id-SLDRBs-FailedToBeSetupMod-List,
	id-SLDRBs-SetupMod-Item,
	id-SLDRBs-FailedToBeSetupMod-Item,
	id-SLDRBs-ModifiedConf-List,
	id-SLDRBs-ModifiedConf-Item,
	id-gNBCUMeasurementID,
	id-gNBDUMeasurementID,
	id-RegistrationRequest,
	id-ReportCharacteristics,
	id-CellToReportList,
	id-CellMeasurementResultList,
	id-HardwareLoadIndicator,
	id-ReportingPeriodicity, 
	id-TNLCapacityIndicator, 
	id-RACHReportInformationList,
	id-RLFReportInformationList,
	id-ReportingRequestType,
	id-TimeReferenceInformation,
	id-ConditionalInterDUMobilityInformation,
	id-ConditionalIntraDUMobilityInformation,
	id-targetCellsToCancel,
	id-requestedTargetCellGlobalID,
	id-TraceCollectionEntityIPAddress,
	id-ManagementBasedMDTPLMNList,
	id-PrivacyIndicator,
	id-TraceCollectionEntityURI,
	id-ServingNID,
	id-PosAssistance-Information,
	id-PosBroadcast,
	id-PositioningBroadcastCells,
	id-RoutingID,
	id-PosAssistanceInformationFailureList,
	id-PosMeasurementQuantities,
	id-PosMeasurementResultList,
	id-PosMeasurementPeriodicity,
	id-PosReportCharacteristics,
	id-TRPInformationTypeListTRPReq,
	id-TRPInformationTypeItem,
	id-TRPInformationListTRPResp,
	id-TRPInformationItem,
	id-LMF-MeasurementID,
	id-RAN-MeasurementID,
	id-SRSType,
	id-ActivationTime,
	id-AbortTransmission,
	id-SRSConfiguration,
	id-TRPList,
	id-E-CID-MeasurementQuantities,
	id-E-CID-MeasurementPeriodicity,
	id-E-CID-MeasurementResult,
	id-Cell-Portion-ID,
	id-LMF-UE-MeasurementID,
	id-RAN-UE-MeasurementID,
	id-SFNInitialisationTime,
	id-SystemFrameNumber,
	id-SlotNumber,
	id-TRP-MeasurementRequestList,
	id-MeasurementBeamInfoRequest,
	id-E-CID-ReportCharacteristics,
	id-F1CTransferPath,
	id-SCGIndicator,
	id-SRSSpatialRelationPerSRSResource,
	id-PosMeasurementPeriodicityExtended,
	maxCellingNBDU,
	maxnoofCandidateSpCells,
	maxnoofDRBs,
	maxnoofErrors,
	maxnoofIndividualF1ConnectionsToReset,
	maxnoofPotentialSpCells,
	maxnoofSCells,
	maxnoofSRBs,
	maxnoofPagingCells,
	maxnoofTNLAssociations,
	maxCellineNB,
	maxnoofUEIDs,
	maxnoofBHRLCChannels,
	maxnoofRoutingEntries,
	maxnoofChildIABNodes,
	maxnoofServedCellsIAB,
	maxnoofTLAsIAB,
	maxnoofULUPTNLInformationforIAB,
	maxnoofUPTNLAddresses,
	maxnoofSLDRBs,
	maxnoofTRPInfoTypes,
	maxnoofTRPs



FROM F1AP-Constants;


-- **************************************************************
--
-- RESET ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Reset
--
-- **************************************************************

Reset ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {ResetIEs} },
	...
}

ResetIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-ResetType					CRITICALITY reject	TYPE ResetType					PRESENCE mandatory	},
	...
}

ResetType ::= CHOICE {
	f1-Interface					ResetAll,
	partOfF1-Interface				UE-associatedLogicalF1-ConnectionListRes, 
	choice-extension				ProtocolIE-SingleContainer { { ResetType-ExtIEs} }
}

ResetType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}


ResetAll ::= ENUMERATED {
	reset-all,
	...
}

UE-associatedLogicalF1-ConnectionListRes ::= SEQUENCE (SIZE(1.. maxnoofIndividualF1ConnectionsToReset)) OF ProtocolIE-SingleContainer { { UE-associatedLogicalF1-ConnectionItemRes } }

UE-associatedLogicalF1-ConnectionItemRes F1AP-PROTOCOL-IES ::= {
	{ ID id-UE-associatedLogicalF1-ConnectionItem	CRITICALITY reject	TYPE UE-associatedLogicalF1-ConnectionItem	PRESENCE mandatory},
	...
}


-- **************************************************************
--
-- Reset Acknowledge
--
-- **************************************************************

ResetAcknowledge ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {ResetAcknowledgeIEs} },
	...
}

ResetAcknowledgeIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID									CRITICALITY reject	TYPE TransactionID													PRESENCE mandatory	}|
	{ ID id-UE-associatedLogicalF1-ConnectionListResAck		CRITICALITY ignore	TYPE UE-associatedLogicalF1-ConnectionListResAck			PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional	},
	...
}

UE-associatedLogicalF1-ConnectionListResAck ::= SEQUENCE (SIZE(1.. maxnoofIndividualF1ConnectionsToReset)) OF ProtocolIE-SingleContainer { { UE-associatedLogicalF1-ConnectionItemResAck } }

UE-associatedLogicalF1-ConnectionItemResAck 	F1AP-PROTOCOL-IES ::= {
	{ ID id-UE-associatedLogicalF1-ConnectionItem	 CRITICALITY ignore 	TYPE UE-associatedLogicalF1-ConnectionItem  	PRESENCE mandatory },
	...
}

-- **************************************************************
--
-- ERROR INDICATION ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Error Indication
--
-- **************************************************************

ErrorIndication ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ErrorIndicationIEs}},
	...
}

ErrorIndicationIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory}|
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY ignore	TYPE GNB-CU-UE-F1AP-ID			PRESENCE optional	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY ignore	TYPE GNB-DU-UE-F1AP-ID			PRESENCE optional	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}

-- **************************************************************
--
-- F1 SETUP ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- F1 Setup Request
--
-- **************************************************************

F1SetupRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {F1SetupRequestIEs} },
	...
}

F1SetupRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID						PRESENCE mandatory	}|
	{ ID id-gNB-DU-ID						CRITICALITY reject	TYPE GNB-DU-ID							PRESENCE mandatory	}|
	{ ID id-gNB-DU-Name						CRITICALITY ignore	TYPE GNB-DU-Name						PRESENCE optional	}|
	{ ID id-gNB-DU-Served-Cells-List		CRITICALITY reject	TYPE GNB-DU-Served-Cells-List			PRESENCE optional	}|
	{ ID id-GNB-DU-RRC-Version				CRITICALITY reject	TYPE RRC-Version						PRESENCE mandatory	}|
	{ ID id-Transport-Layer-Address-Info	CRITICALITY ignore	TYPE Transport-Layer-Address-Info		PRESENCE optional	}|
	{ ID id-BAPAddress						CRITICALITY ignore	TYPE BAPAddress							PRESENCE optional	}|
	{ ID id-Extended-GNB-DU-Name			CRITICALITY ignore	TYPE Extended-GNB-DU-Name				PRESENCE optional	},
	...
} 


GNB-DU-Served-Cells-List 	::= SEQUENCE (SIZE(1.. maxCellingNBDU)) OF ProtocolIE-SingleContainer { { GNB-DU-Served-Cells-ItemIEs } }

GNB-DU-Served-Cells-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-GNB-DU-Served-Cells-Item		CRITICALITY reject	TYPE		GNB-DU-Served-Cells-Item	PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- F1 Setup Response
--
-- **************************************************************

F1SetupResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {F1SetupResponseIEs} },
	...
}


F1SetupResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID						PRESENCE mandatory	}|
	{ ID id-gNB-CU-Name						CRITICALITY ignore	TYPE GNB-CU-Name						PRESENCE optional	}|
	{ ID id-Cells-to-be-Activated-List		CRITICALITY reject	TYPE Cells-to-be-Activated-List			PRESENCE optional	}|
	{ ID id-GNB-CU-RRC-Version				CRITICALITY reject	TYPE RRC-Version						PRESENCE mandatory	}|
	{ ID id-Transport-Layer-Address-Info	CRITICALITY ignore	TYPE Transport-Layer-Address-Info		PRESENCE optional	}|
	{ ID id-UL-BH-Non-UP-Traffic-Mapping	CRITICALITY reject	TYPE UL-BH-Non-UP-Traffic-Mapping		PRESENCE optional	}|
	{ ID id-BAPAddress						CRITICALITY ignore	TYPE BAPAddress							PRESENCE optional	}|
	{ ID id-Extended-GNB-CU-Name			CRITICALITY ignore	TYPE Extended-GNB-CU-Name				PRESENCE optional	},
	...
}


Cells-to-be-Activated-List	::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Cells-to-be-Activated-List-ItemIEs } }

Cells-to-be-Activated-List-ItemIEs	F1AP-PROTOCOL-IES::= {
	{ ID id-Cells-to-be-Activated-List-Item				CRITICALITY reject	TYPE Cells-to-be-Activated-List-Item						PRESENCE mandatory},
	...
}



-- **************************************************************
--
-- F1 Setup Failure
--
-- **************************************************************

F1SetupFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {F1SetupFailureIEs} },
	...
}

F1SetupFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-TimeToWait					CRITICALITY ignore	TYPE TimeToWait					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}


-- **************************************************************
--
-- GNB-DU CONFIGURATION UPDATE ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- GNB-DU CONFIGURATION UPDATE
--
-- **************************************************************

GNBDUConfigurationUpdate::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {GNBDUConfigurationUpdateIEs} },
	...
}

GNBDUConfigurationUpdateIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID												PRESENCE mandatory	}|
	{ ID id-Served-Cells-To-Add-List				CRITICALITY reject	TYPE Served-Cells-To-Add-List								PRESENCE optional	}|
	{ ID id-Served-Cells-To-Modify-List				CRITICALITY reject	TYPE Served-Cells-To-Modify-List							PRESENCE optional	}|
	{ ID id-Served-Cells-To-Delete-List				CRITICALITY reject	TYPE Served-Cells-To-Delete-List							PRESENCE optional	}|
	{ ID id-Cells-Status-List						CRITICALITY reject	TYPE Cells-Status-List											PRESENCE optional	}|
	{ ID id-Dedicated-SIDelivery-NeededUE-List		CRITICALITY ignore	TYPE Dedicated-SIDelivery-NeededUE-List					PRESENCE optional	}|
	{ ID id-gNB-DU-ID								CRITICALITY reject	TYPE GNB-DU-ID													PRESENCE optional	}|
	{ ID id-GNB-DU-TNL-Association-To-Remove-List	CRITICALITY reject	TYPE GNB-DU-TNL-Association-To-Remove-List				PRESENCE optional	}|
	{ ID id-Transport-Layer-Address-Info			CRITICALITY ignore	TYPE Transport-Layer-Address-Info							PRESENCE optional	}|
	{ ID id-gNB-DU-Name								CRITICALITY ignore	TYPE GNB-DU-Name												PRESENCE optional	}|
	{ ID id-Extended-GNB-DU-Name					CRITICALITY ignore	TYPE Extended-GNB-DU-Name										PRESENCE optional	},
	...
} 

Served-Cells-To-Add-List		::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Served-Cells-To-Add-ItemIEs } }
Served-Cells-To-Modify-List	::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Served-Cells-To-Modify-ItemIEs } }
Served-Cells-To-Delete-List	::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Served-Cells-To-Delete-ItemIEs } }
Cells-Status-List	::= SEQUENCE (SIZE(0.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Cells-Status-ItemIEs } }

Dedicated-SIDelivery-NeededUE-List::= SEQUENCE (SIZE(1.. maxnoofUEIDs))	OF ProtocolIE-SingleContainer { { Dedicated-SIDelivery-NeededUE-ItemIEs } }

GNB-DU-TNL-Association-To-Remove-List	::= SEQUENCE (SIZE(1.. maxnoofTNLAssociations))	OF ProtocolIE-SingleContainer { { GNB-DU-TNL-Association-To-Remove-ItemIEs } }


Served-Cells-To-Add-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Served-Cells-To-Add-Item		CRITICALITY reject	TYPE	Served-Cells-To-Add-Item				PRESENCE mandatory	},
	...
}

Served-Cells-To-Modify-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Served-Cells-To-Modify-Item			CRITICALITY reject	TYPE		Served-Cells-To-Modify-Item							PRESENCE mandatory	},
	...
}

Served-Cells-To-Delete-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Served-Cells-To-Delete-Item				CRITICALITY reject	TYPE		Served-Cells-To-Delete-Item					PRESENCE mandatory	},
	...
}

Cells-Status-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Cells-Status-Item				CRITICALITY reject	TYPE		Cells-Status-Item					PRESENCE mandatory	},
	...
}

Dedicated-SIDelivery-NeededUE-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Dedicated-SIDelivery-NeededUE-Item		CRITICALITY ignore	TYPE	Dedicated-SIDelivery-NeededUE-Item				PRESENCE mandatory	},
	...
} 

GNB-DU-TNL-Association-To-Remove-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-GNB-DU-TNL-Association-To-Remove-Item		CRITICALITY reject	TYPE	 GNB-DU-TNL-Association-To-Remove-Item			PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- GNB-DU CONFIGURATION UPDATE ACKNOWLEDGE
--
-- **************************************************************

GNBDUConfigurationUpdateAcknowledge ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {GNBDUConfigurationUpdateAcknowledgeIEs} },
	...
}


GNBDUConfigurationUpdateAcknowledgeIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID						CRITICALITY reject	TYPE TransactionID								PRESENCE mandatory	}|
	{ ID id-Cells-to-be-Activated-List			CRITICALITY reject	TYPE Cells-to-be-Activated-List				PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics				CRITICALITY ignore	TYPE CriticalityDiagnostics						PRESENCE optional	}|
	{ ID id-Cells-to-be-Deactivated-List		CRITICALITY reject	TYPE Cells-to-be-Deactivated-List			PRESENCE optional	}|
	{ ID id-Transport-Layer-Address-Info		CRITICALITY ignore	TYPE Transport-Layer-Address-Info			PRESENCE optional	}|
	{ ID id-UL-BH-Non-UP-Traffic-Mapping		CRITICALITY reject	TYPE UL-BH-Non-UP-Traffic-Mapping			PRESENCE optional	}|
	{ ID id-BAPAddress							CRITICALITY ignore  TYPE BAPAddress									PRESENCE optional },
	...
}

-- **************************************************************
--
-- GNB-DU CONFIGURATION UPDATE FAILURE
--
-- **************************************************************

GNBDUConfigurationUpdateFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {GNBDUConfigurationUpdateFailureIEs} },
	...
}

GNBDUConfigurationUpdateFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-TimeToWait					CRITICALITY ignore	TYPE TimeToWait					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}

-- **************************************************************
--
-- GNB-CU CONFIGURATION UPDATE ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- GNB-CU CONFIGURATION UPDATE
--
-- **************************************************************

GNBCUConfigurationUpdate ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { GNBCUConfigurationUpdateIEs} },
	...
}

GNBCUConfigurationUpdateIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID												PRESENCE mandatory	}|
	{ ID id-Cells-to-be-Activated-List				CRITICALITY reject	TYPE	Cells-to-be-Activated-List							PRESENCE optional	}|
	{ ID id-Cells-to-be-Deactivated-List			CRITICALITY reject	TYPE	Cells-to-be-Deactivated-List						PRESENCE optional	}|
	{ ID id-GNB-CU-TNL-Association-To-Add-List		CRITICALITY ignore	TYPE	GNB-CU-TNL-Association-To-Add-List				PRESENCE optional	}|
	{ ID id-GNB-CU-TNL-Association-To-Remove-List	CRITICALITY ignore	TYPE	GNB-CU-TNL-Association-To-Remove-List			PRESENCE optional	}|
	{ ID id-GNB-CU-TNL-Association-To-Update-List	CRITICALITY ignore	TYPE	GNB-CU-TNL-Association-To-Update-List			PRESENCE optional	}|
	{ ID id-Cells-to-be-Barred-List					CRITICALITY ignore	TYPE	Cells-to-be-Barred-List								PRESENCE optional	}|
	{ ID id-Protected-EUTRA-Resources-List			CRITICALITY reject	TYPE	Protected-EUTRA-Resources-List					PRESENCE optional	}|
	{ ID id-Neighbour-Cell-Information-List			CRITICALITY ignore	TYPE	Neighbour-Cell-Information-List					PRESENCE optional	}|
	{ ID id-Transport-Layer-Address-Info			CRITICALITY ignore	TYPE	Transport-Layer-Address-Info						PRESENCE optional	}|
	{ ID id-UL-BH-Non-UP-Traffic-Mapping			CRITICALITY reject	TYPE	UL-BH-Non-UP-Traffic-Mapping						PRESENCE optional	}|
	{ ID id-BAPAddress								CRITICALITY ignore	TYPE	BAPAddress												PRESENCE optional }|
	{ ID id-gNB-CU-Name								CRITICALITY ignore	TYPE GNB-CU-Name												PRESENCE optional	}|
	{ ID id-Extended-GNB-CU-Name					CRITICALITY ignore	TYPE Extended-GNB-CU-Name										PRESENCE optional	},
	...
} 

Cells-to-be-Deactivated-List	::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Cells-to-be-Deactivated-List-ItemIEs } }
GNB-CU-TNL-Association-To-Add-List		::= SEQUENCE (SIZE(1.. maxnoofTNLAssociations))	OF ProtocolIE-SingleContainer { { GNB-CU-TNL-Association-To-Add-ItemIEs } }
GNB-CU-TNL-Association-To-Remove-List	::= SEQUENCE (SIZE(1.. maxnoofTNLAssociations))	OF ProtocolIE-SingleContainer { { GNB-CU-TNL-Association-To-Remove-ItemIEs } }
GNB-CU-TNL-Association-To-Update-List	::= SEQUENCE (SIZE(1.. maxnoofTNLAssociations))	OF ProtocolIE-SingleContainer { { GNB-CU-TNL-Association-To-Update-ItemIEs } }
Cells-to-be-Barred-List			::= SEQUENCE(SIZE(1.. maxCellingNBDU)) OF ProtocolIE-SingleContainer { { Cells-to-be-Barred-ItemIEs } }


Cells-to-be-Deactivated-List-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Cells-to-be-Deactivated-List-Item						CRITICALITY reject	TYPE	Cells-to-be-Deactivated-List-Item					PRESENCE mandatory	},
	...
}


GNB-CU-TNL-Association-To-Add-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-GNB-CU-TNL-Association-To-Add-Item		CRITICALITY ignore	TYPE	 GNB-CU-TNL-Association-To-Add-Item			PRESENCE mandatory	},
	...
}

GNB-CU-TNL-Association-To-Remove-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-GNB-CU-TNL-Association-To-Remove-Item		CRITICALITY ignore	TYPE	 GNB-CU-TNL-Association-To-Remove-Item			PRESENCE mandatory	},
	...
}

GNB-CU-TNL-Association-To-Update-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-GNB-CU-TNL-Association-To-Update-Item		CRITICALITY ignore	TYPE	 GNB-CU-TNL-Association-To-Update-Item			PRESENCE mandatory	},
	...
}

Cells-to-be-Barred-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Cells-to-be-Barred-Item		CRITICALITY ignore	TYPE	 Cells-to-be-Barred-Item				PRESENCE mandatory	},
	...
}

Protected-EUTRA-Resources-List ::= SEQUENCE (SIZE(1.. maxCellineNB))	OF ProtocolIE-SingleContainer { { Protected-EUTRA-Resources-ItemIEs } }
Protected-EUTRA-Resources-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Protected-EUTRA-Resources-Item 					CRITICALITY reject 	TYPE Protected-EUTRA-Resources-Item							PRESENCE mandatory},
	...
}

Neighbour-Cell-Information-List ::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Neighbour-Cell-Information-ItemIEs } }
Neighbour-Cell-Information-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Neighbour-Cell-Information-Item 					CRITICALITY ignore 	TYPE Neighbour-Cell-Information-Item							PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- GNB-CU CONFIGURATION UPDATE ACKNOWLEDGE
--
-- **************************************************************

GNBCUConfigurationUpdateAcknowledge ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { GNBCUConfigurationUpdateAcknowledgeIEs} },
	...
}


GNBCUConfigurationUpdateAcknowledgeIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID								CRITICALITY reject	TYPE TransactionID											PRESENCE mandatory	}|
	{ ID id-Cells-Failed-to-be-Activated-List			CRITICALITY reject	TYPE Cells-Failed-to-be-Activated-List				PRESENCE optional}|
	{ ID id-CriticalityDiagnostics							CRITICALITY ignore	TYPE CriticalityDiagnostics								PRESENCE optional	}|
	{ ID id-GNB-CU-TNL-Association-Setup-List			CRITICALITY ignore	TYPE GNB-CU-TNL-Association-Setup-List				PRESENCE optional	}|
	{ ID id-GNB-CU-TNL-Association-Failed-To-Setup-List	CRITICALITY ignore	TYPE GNB-CU-TNL-Association-Failed-To-Setup-List	PRESENCE optional	}|
	{ ID id-Dedicated-SIDelivery-NeededUE-List				CRITICALITY ignore	TYPE Dedicated-SIDelivery-NeededUE-List				PRESENCE optional	}|
	{ ID id-Transport-Layer-Address-Info				CRITICALITY ignore	TYPE Transport-Layer-Address-Info						PRESENCE optional	},
	...
}

Cells-Failed-to-be-Activated-List	::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Cells-Failed-to-be-Activated-List-ItemIEs } }
GNB-CU-TNL-Association-Setup-List ::= SEQUENCE (SIZE(1.. maxnoofTNLAssociations))	OF ProtocolIE-SingleContainer { { GNB-CU-TNL-Association-Setup-ItemIEs } }
GNB-CU-TNL-Association-Failed-To-Setup-List ::= SEQUENCE (SIZE(1.. maxnoofTNLAssociations))	OF ProtocolIE-SingleContainer { { GNB-CU-TNL-Association-Failed-To-Setup-ItemIEs } }

Cells-Failed-to-be-Activated-List-ItemIEs F1AP-PROTOCOL-IES		::= {
	{ ID id-Cells-Failed-to-be-Activated-List-Item		CRITICALITY reject	TYPE Cells-Failed-to-be-Activated-List-Item		PRESENCE mandatory	},
	...
}

GNB-CU-TNL-Association-Setup-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-GNB-CU-TNL-Association-Setup-Item		CRITICALITY ignore	TYPE	 GNB-CU-TNL-Association-Setup-Item			PRESENCE mandatory	},
	...
}


GNB-CU-TNL-Association-Failed-To-Setup-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-GNB-CU-TNL-Association-Failed-To-Setup-Item		CRITICALITY ignore	TYPE	 GNB-CU-TNL-Association-Failed-To-Setup-Item			PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- GNB-CU CONFIGURATION UPDATE FAILURE
--
-- **************************************************************

GNBCUConfigurationUpdateFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { GNBCUConfigurationUpdateFailureIEs} },
	...
}

GNBCUConfigurationUpdateFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-TimeToWait					CRITICALITY ignore	TYPE TimeToWait					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}


-- **************************************************************
--
-- GNB-DU RESOURCE COORDINATION REQUEST 
--
-- **************************************************************

GNBDUResourceCoordinationRequest ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{{GNBDUResourceCoordinationRequest-IEs}},
	...
}

GNBDUResourceCoordinationRequest-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID									CRITICALITY reject	TYPE TransactionID									PRESENCE mandatory	}|
	{ ID id-RequestType										CRITICALITY reject	TYPE RequestType										PRESENCE mandatory	}|
	{ ID id-EUTRA-NR-CellResourceCoordinationReq-Container	CRITICALITY reject	TYPE EUTRA-NR-CellResourceCoordinationReq-Container	PRESENCE mandatory}|
	{ ID id-IgnoreResourceCoordinationContainer				CRITICALITY reject	TYPE IgnoreResourceCoordinationContainer		PRESENCE optional },
	...
}


-- **************************************************************
--
-- GNB-DU RESOURCE COORDINATION RESPONSE 
--
-- **************************************************************

GNBDUResourceCoordinationResponse ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{{GNBDUResourceCoordinationResponse-IEs}},
	...
}

GNBDUResourceCoordinationResponse-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID										CRITICALITY reject	TYPE TransactionID						PRESENCE mandatory	}|
	{ ID id-EUTRA-NR-CellResourceCoordinationReqAck-Container	CRITICALITY reject	TYPE EUTRA-NR-CellResourceCoordinationReqAck-Container		PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- UE Context Setup ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- UE CONTEXT SETUP REQUEST
--
-- **************************************************************

UEContextSetupRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextSetupRequestIEs} },
	...
}

UEContextSetupRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID									PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID						CRITICALITY ignore	TYPE GNB-DU-UE-F1AP-ID									PRESENCE optional 	}|
	{ ID id-SpCell-ID								CRITICALITY reject	TYPE NRCGI												PRESENCE mandatory	}|
	{ ID id-ServCellIndex							CRITICALITY reject	TYPE ServCellIndex										PRESENCE mandatory	}|
	{ ID id-SpCellULConfigured						CRITICALITY ignore	TYPE CellULConfigured									PRESENCE optional	}|
	{ ID id-CUtoDURRCInformation					CRITICALITY reject	TYPE CUtoDURRCInformation								PRESENCE mandatory}|
	{ ID id-Candidate-SpCell-List					CRITICALITY ignore	TYPE Candidate-SpCell-List							PRESENCE optional	}|
	{ ID id-DRXCycle								CRITICALITY ignore	TYPE DRXCycle											PRESENCE optional	}|
	{ ID id-ResourceCoordinationTransferContainer	CRITICALITY ignore	TYPE ResourceCoordinationTransferContainer		PRESENCE optional	}|
	{ ID id-SCell-ToBeSetup-List					CRITICALITY ignore	TYPE SCell-ToBeSetup-List								PRESENCE optional	}|
	{ ID id-SRBs-ToBeSetup-List						CRITICALITY reject	TYPE SRBs-ToBeSetup-List								PRESENCE optional	}|
	{ ID id-DRBs-ToBeSetup-List						CRITICALITY reject	TYPE DRBs-ToBeSetup-List								PRESENCE optional	}|
	{ ID id-InactivityMonitoringRequest				CRITICALITY reject	TYPE InactivityMonitoringRequest					PRESENCE optional	}|
	{ ID id-RAT-FrequencyPriorityInformation		CRITICALITY reject	TYPE RAT-FrequencyPriorityInformation				PRESENCE optional	}|
	{ ID id-RRCContainer							CRITICALITY ignore	TYPE RRCContainer										PRESENCE optional	}|
	{ ID id-MaskedIMEISV							CRITICALITY ignore	TYPE MaskedIMEISV										PRESENCE optional	}|
	{ ID id-ServingPLMN								CRITICALITY ignore	TYPE PLMN-Identity										PRESENCE optional	}|
	{ ID id-GNB-DU-UE-AMBR-UL						CRITICALITY ignore	TYPE BitRate											PRESENCE conditional }|
	{ ID id-RRCDeliveryStatusRequest				CRITICALITY ignore	TYPE RRCDeliveryStatusRequest						PRESENCE optional }|
	{ ID id-ResourceCoordinationTransferInformation	CRITICALITY ignore	TYPE ResourceCoordinationTransferInformation	PRESENCE optional	}|
	{ ID id-ServingCellMO							CRITICALITY ignore	TYPE ServingCellMO										PRESENCE optional	}|
	{ ID id-new-gNB-CU-UE-F1AP-ID					CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID									PRESENCE optional }|
	{ ID id-RANUEID									CRITICALITY ignore	TYPE RANUEID											PRESENCE optional	}|
	{ ID id-TraceActivation							CRITICALITY ignore	TYPE TraceActivation									PRESENCE optional	}|
	{ ID id-AdditionalRRMPriorityIndex				CRITICALITY ignore	TYPE AdditionalRRMPriorityIndex						PRESENCE optional }|
	{ ID id-BHChannels-ToBeSetup-List				CRITICALITY reject	TYPE BHChannels-ToBeSetup-List						PRESENCE optional	}|
	{ ID id-ConfiguredBAPAddress					CRITICALITY reject	TYPE BAPAddress											PRESENCE optional	}|
	{ ID id-NRV2XServicesAuthorized					CRITICALITY ignore	TYPE NRV2XServicesAuthorized							PRESENCE optional }|
	{ ID id-LTEV2XServicesAuthorized				CRITICALITY ignore	TYPE LTEV2XServicesAuthorized						PRESENCE optional }|
	{ ID id-NRUESidelinkAggregateMaximumBitrate		CRITICALITY ignore	TYPE NRUESidelinkAggregateMaximumBitrate			PRESENCE optional }|
	{ ID id-LTEUESidelinkAggregateMaximumBitrate	CRITICALITY ignore	TYPE LTEUESidelinkAggregateMaximumBitrate		PRESENCE optional }|
	{ ID id-PC5LinkAMBR								CRITICALITY ignore	TYPE BitRate											PRESENCE optional}|
	{ ID id-SLDRBs-ToBeSetup-List					CRITICALITY reject	TYPE SLDRBs-ToBeSetup-List							PRESENCE optional	}|
	{ ID id-ConditionalInterDUMobilityInformation	CRITICALITY reject	TYPE ConditionalInterDUMobilityInformation		PRESENCE optional}|
	{ ID id-ManagementBasedMDTPLMNList				CRITICALITY ignore	TYPE 		MDTPLMNList									PRESENCE optional }|
	{ ID id-ServingNID								CRITICALITY reject	TYPE NID												PRESENCE optional }|
	{ ID id-F1CTransferPath							CRITICALITY reject	TYPE F1CTransferPath									PRESENCE optional },
	...
} 

Candidate-SpCell-List::= SEQUENCE (SIZE(1..maxnoofCandidateSpCells)) OF ProtocolIE-SingleContainer { { Candidate-SpCell-ItemIEs} }
SCell-ToBeSetup-List::= SEQUENCE (SIZE(1..maxnoofSCells)) OF ProtocolIE-SingleContainer { { SCell-ToBeSetup-ItemIEs} }
SRBs-ToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-ToBeSetup-ItemIEs} }
DRBs-ToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-ToBeSetup-ItemIEs} }
BHChannels-ToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-ToBeSetup-ItemIEs} }
SLDRBs-ToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-ToBeSetup-ItemIEs} }

Candidate-SpCell-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-Candidate-SpCell-Item					CRITICALITY ignore	TYPE Candidate-SpCell-Item						PRESENCE mandatory	},
	...
}


SCell-ToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SCell-ToBeSetup-Item						CRITICALITY ignore	TYPE SCell-ToBeSetup-Item					PRESENCE mandatory	},
	...
}

SRBs-ToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-ToBeSetup-Item		CRITICALITY reject		TYPE SRBs-ToBeSetup-Item		PRESENCE mandatory},
	...
}

DRBs-ToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-ToBeSetup-Item					CRITICALITY reject	TYPE DRBs-ToBeSetup-Item					PRESENCE mandatory},
	...
}

BHChannels-ToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-ToBeSetup-Item					CRITICALITY reject	TYPE BHChannels-ToBeSetup-Item					PRESENCE mandatory},
	...
}

SLDRBs-ToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-ToBeSetup-Item					CRITICALITY reject	TYPE SLDRBs-ToBeSetup-Item					PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- UE CONTEXT SETUP RESPONSE
--
-- **************************************************************

UEContextSetupResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextSetupResponseIEs} },
	...
}


UEContextSetupResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-DUtoCURRCInformation					CRITICALITY reject	TYPE DUtoCURRCInformation							PRESENCE mandatory }|
	{ ID id-C-RNTI									CRITICALITY ignore	TYPE C-RNTI											PRESENCE optional	}|
	{ ID id-ResourceCoordinationTransferContainer	CRITICALITY ignore	TYPE ResourceCoordinationTransferContainer	PRESENCE optional	}|
	{ ID id-FullConfiguration						CRITICALITY reject	TYPE FullConfiguration								PRESENCE optional	}|
	{ ID id-DRBs-Setup-List							CRITICALITY ignore	TYPE DRBs-Setup-List								PRESENCE optional	}|
	{ ID id-SRBs-FailedToBeSetup-List				CRITICALITY ignore	TYPE SRBs-FailedToBeSetup-List					PRESENCE optional	}|
	{ ID id-DRBs-FailedToBeSetup-List				CRITICALITY ignore	TYPE DRBs-FailedToBeSetup-List					PRESENCE optional	}|
	{ ID id-SCell-FailedtoSetup-List				CRITICALITY ignore	TYPE SCell-FailedtoSetup-List					PRESENCE optional	}|
	{ ID id-InactivityMonitoringResponse			CRITICALITY reject	TYPE InactivityMonitoringResponse				PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics					CRITICALITY ignore	TYPE CriticalityDiagnostics						PRESENCE optional	}|
	{ ID id-SRBs-Setup-List							CRITICALITY ignore	TYPE SRBs-Setup-List								PRESENCE optional	}|
	{ ID id-BHChannels-Setup-List					CRITICALITY ignore	TYPE BHChannels-Setup-List						PRESENCE optional	}|
	{ ID id-BHChannels-FailedToBeSetup-List			CRITICALITY ignore	TYPE BHChannels-FailedToBeSetup-List			PRESENCE optional	}|
	{ ID id-SLDRBs-Setup-List						CRITICALITY ignore	TYPE SLDRBs-Setup-List								PRESENCE optional	}|
	{ ID id-SLDRBs-FailedToBeSetup-List				CRITICALITY ignore	TYPE SLDRBs-FailedToBeSetup-List				PRESENCE optional	}|
	{ ID id-requestedTargetCellGlobalID				CRITICALITY reject	TYPE NRCGI											PRESENCE optional},
	...
}

DRBs-Setup-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-Setup-ItemIEs} }


SRBs-FailedToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-FailedToBeSetup-ItemIEs} }
DRBs-FailedToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-FailedToBeSetup-ItemIEs} }
SCell-FailedtoSetup-List ::= SEQUENCE (SIZE(1..maxnoofSCells)) OF ProtocolIE-SingleContainer { { SCell-FailedtoSetup-ItemIEs} }
SRBs-Setup-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-Setup-ItemIEs} }
BHChannels-Setup-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-Setup-ItemIEs} }
BHChannels-FailedToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-FailedToBeSetup-ItemIEs} }

DRBs-Setup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-Setup-Item						CRITICALITY ignore	TYPE DRBs-Setup-Item						PRESENCE mandatory},
	...
}

SRBs-Setup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-Setup-Item						CRITICALITY ignore	TYPE SRBs-Setup-Item						PRESENCE mandatory},
	...
}

SRBs-FailedToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-FailedToBeSetup-Item		CRITICALITY ignore		TYPE SRBs-FailedToBeSetup-Item		PRESENCE mandatory},
	...
}


DRBs-FailedToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-FailedToBeSetup-Item		CRITICALITY ignore	TYPE DRBs-FailedToBeSetup-Item			PRESENCE mandatory},
	...
}

SCell-FailedtoSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SCell-FailedtoSetup-Item			CRITICALITY ignore	TYPE SCell-FailedtoSetup-Item			PRESENCE mandatory},
	...
}

BHChannels-Setup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-Setup-Item						CRITICALITY ignore	TYPE BHChannels-Setup-Item						PRESENCE mandatory},
	...
}

BHChannels-FailedToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-FailedToBeSetup-Item						CRITICALITY ignore	TYPE BHChannels-FailedToBeSetup-Item		PRESENCE mandatory},
	...
}

SLDRBs-Setup-List ::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-Setup-ItemIEs} }

SLDRBs-FailedToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-FailedToBeSetup-ItemIEs} }

SLDRBs-Setup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-Setup-Item						CRITICALITY ignore	TYPE SLDRBs-Setup-Item						PRESENCE mandatory},
	...
}

SLDRBs-FailedToBeSetup-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-FailedToBeSetup-Item		CRITICALITY ignore	TYPE SLDRBs-FailedToBeSetup-Item			PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- UE CONTEXT SETUP FAILURE
--
-- **************************************************************

UEContextSetupFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextSetupFailureIEs} },
	...
}

UEContextSetupFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY ignore	TYPE GNB-DU-UE-F1AP-ID			PRESENCE optional	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	}|
	{ ID id-Potential-SpCell-List		CRITICALITY ignore	TYPE Potential-SpCell-List		PRESENCE optional	}|
	{ ID id-requestedTargetCellGlobalID	CRITICALITY reject	TYPE NRCGI						PRESENCE optional},
	...
}

Potential-SpCell-List::= SEQUENCE (SIZE(0..maxnoofPotentialSpCells)) OF ProtocolIE-SingleContainer { { Potential-SpCell-ItemIEs} }

Potential-SpCell-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-Potential-SpCell-Item				CRITICALITY ignore	TYPE Potential-SpCell-Item					PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- UE Context Release Request ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- UE Context Release Request
--
-- **************************************************************

UEContextReleaseRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ UEContextReleaseRequestIEs}},
	...
}

UEContextReleaseRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-Cause							CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	}|
	{ ID id-targetCellsToCancel				CRITICALITY reject	TYPE TargetCellList					PRESENCE optional		},
	...
}


-- **************************************************************
--
-- UE Context Release (gNB-CU initiated) ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- UE CONTEXT RELEASE COMMAND 
--
-- **************************************************************

UEContextReleaseCommand ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextReleaseCommandIEs} },
	...
}

UEContextReleaseCommandIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-Cause							CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	}|
	{ ID id-RRCContainer					CRITICALITY ignore	TYPE RRCContainer					PRESENCE optional	}|
	{ ID id-SRBID							CRITICALITY ignore	TYPE SRBID							PRESENCE conditional	}|
	{ ID id-oldgNB-DU-UE-F1AP-ID			CRITICALITY ignore	TYPE GNB-DU-UE-F1AP-ID				PRESENCE optional	}|
	{ ID id-ExecuteDuplication				CRITICALITY ignore	TYPE ExecuteDuplication				PRESENCE optional}|
	{ ID id-RRCDeliveryStatusRequest		CRITICALITY ignore	TYPE RRCDeliveryStatusRequest		PRESENCE optional }|
	{ ID id-targetCellsToCancel				CRITICALITY reject	TYPE TargetCellList					PRESENCE optional},
	...
} 

-- **************************************************************
--
-- UE CONTEXT RELEASE COMPLETE
--
-- **************************************************************

UEContextReleaseComplete ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextReleaseCompleteIEs} },
	...
}


UEContextReleaseCompleteIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}

-- **************************************************************
--
-- UE Context Modification ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- UE CONTEXT MODIFICATION REQUEST
--
-- **************************************************************

UEContextModificationRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextModificationRequestIEs} },
	...
}

UEContextModificationRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID									PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID									PRESENCE mandatory	}|
	{ ID id-SpCell-ID								CRITICALITY ignore	TYPE NRCGI												PRESENCE optional	}|
	{ ID id-ServCellIndex							CRITICALITY reject	TYPE ServCellIndex										PRESENCE optional	}|
	{ ID id-SpCellULConfigured						CRITICALITY ignore	TYPE CellULConfigured									PRESENCE optional	}|
	{ ID id-DRXCycle								CRITICALITY ignore	TYPE DRXCycle											PRESENCE optional	}|
	{ ID id-CUtoDURRCInformation					CRITICALITY reject	TYPE CUtoDURRCInformation								PRESENCE optional	}|
	{ ID id-TransmissionActionIndicator				CRITICALITY ignore	TYPE TransmissionActionIndicator					PRESENCE optional	}|
	{ ID id-ResourceCoordinationTransferContainer	CRITICALITY ignore	TYPE ResourceCoordinationTransferContainer		PRESENCE optional	}|
	{ ID id-RRCReconfigurationCompleteIndicator		CRITICALITY ignore	TYPE RRCReconfigurationCompleteIndicator			PRESENCE optional	}|
	{ ID id-RRCContainer							CRITICALITY reject	TYPE RRCContainer										PRESENCE optional	}|
	{ ID id-SCell-ToBeSetupMod-List					CRITICALITY ignore	TYPE SCell-ToBeSetupMod-List							PRESENCE optional	}|
	{ ID id-SCell-ToBeRemoved-List					CRITICALITY ignore	TYPE SCell-ToBeRemoved-List 							PRESENCE optional }|
	{ ID id-SRBs-ToBeSetupMod-List					CRITICALITY reject	TYPE SRBs-ToBeSetupMod-List							PRESENCE optional	}|
	{ ID id-DRBs-ToBeSetupMod-List					CRITICALITY reject	TYPE DRBs-ToBeSetupMod-List							PRESENCE optional	}|
	{ ID id-DRBs-ToBeModified-List					CRITICALITY reject	TYPE DRBs-ToBeModified-List							PRESENCE optional	}|
	{ ID id-SRBs-ToBeReleased-List					CRITICALITY reject	TYPE SRBs-ToBeReleased-List							PRESENCE optional	}|
	{ ID id-DRBs-ToBeReleased-List					CRITICALITY reject	TYPE DRBs-ToBeReleased-List							PRESENCE optional	}|
	{ ID id-InactivityMonitoringRequest				CRITICALITY reject	TYPE InactivityMonitoringRequest					PRESENCE optional	}|
	{ ID id-RAT-FrequencyPriorityInformation		CRITICALITY reject	TYPE RAT-FrequencyPriorityInformation				PRESENCE optional	}|
	{ ID id-DRXConfigurationIndicator				CRITICALITY ignore	TYPE DRXConfigurationIndicator						PRESENCE optional	}|
	{ ID id-RLCFailureIndication					CRITICALITY ignore	TYPE RLCFailureIndication								PRESENCE optional	}|
	{ ID id-UplinkTxDirectCurrentListInformation	CRITICALITY ignore	TYPE UplinkTxDirectCurrentListInformation		PRESENCE optional	}|
	{ ID id-GNB-DUConfigurationQuery				CRITICALITY reject	TYPE GNB-DUConfigurationQuery						PRESENCE optional	}|
	{ ID id-GNB-DU-UE-AMBR-UL						CRITICALITY ignore	TYPE BitRate											PRESENCE optional	}|
	{ ID id-ExecuteDuplication						CRITICALITY ignore	TYPE ExecuteDuplication									PRESENCE optional}|
	{ ID id-RRCDeliveryStatusRequest				CRITICALITY ignore	TYPE RRCDeliveryStatusRequest						PRESENCE optional }|
	{ ID id-ResourceCoordinationTransferInformation	CRITICALITY ignore	TYPE ResourceCoordinationTransferInformation	PRESENCE optional	}|
	{ ID id-ServingCellMO							CRITICALITY ignore	TYPE ServingCellMO										PRESENCE optional	}|
	{ ID id-NeedforGap								CRITICALITY ignore	TYPE NeedforGap											PRESENCE optional	}|
	{ ID id-FullConfiguration						CRITICALITY reject	TYPE FullConfiguration									PRESENCE optional	}|
	{ ID id-AdditionalRRMPriorityIndex				CRITICALITY ignore	TYPE AdditionalRRMPriorityIndex						PRESENCE optional }|
	{ ID id-LowerLayerPresenceStatusChange			CRITICALITY ignore	TYPE LowerLayerPresenceStatusChange				PRESENCE optional	}|
	{ ID id-BHChannels-ToBeSetupMod-List			CRITICALITY reject	TYPE BHChannels-ToBeSetupMod-List					PRESENCE optional	}|
	{ ID id-BHChannels-ToBeModified-List			CRITICALITY reject	TYPE BHChannels-ToBeModified-List					PRESENCE optional	}|
	{ ID id-BHChannels-ToBeReleased-List			CRITICALITY reject	TYPE BHChannels-ToBeReleased-List					PRESENCE optional	}|
	{ ID id-NRV2XServicesAuthorized					CRITICALITY ignore	TYPE NRV2XServicesAuthorized							PRESENCE optional }|
	{ ID id-LTEV2XServicesAuthorized				CRITICALITY ignore	TYPE LTEV2XServicesAuthorized						PRESENCE optional }|
	{ ID id-NRUESidelinkAggregateMaximumBitrate		CRITICALITY ignore	TYPE NRUESidelinkAggregateMaximumBitrate			PRESENCE optional }|
	{ ID id-LTEUESidelinkAggregateMaximumBitrate	CRITICALITY ignore	TYPE LTEUESidelinkAggregateMaximumBitrate		PRESENCE optional }|
	{ ID id-PC5LinkAMBR								CRITICALITY ignore	TYPE BitRate											PRESENCE optional}|
	{ ID id-SLDRBs-ToBeSetupMod-List				CRITICALITY reject	TYPE SLDRBs-ToBeSetupMod-List						PRESENCE optional	}|
	{ ID id-SLDRBs-ToBeModified-List				CRITICALITY reject	TYPE SLDRBs-ToBeModified-List						PRESENCE optional	}|
	{ ID id-SLDRBs-ToBeReleased-List				CRITICALITY reject	TYPE SLDRBs-ToBeReleased-List						PRESENCE optional	}|
	{ ID id-ConditionalIntraDUMobilityInformation	CRITICALITY reject	TYPE ConditionalIntraDUMobilityInformation		PRESENCE optional}|
	{ ID id-F1CTransferPath							CRITICALITY reject	TYPE F1CTransferPath									PRESENCE optional }|
	{ ID id-SCGIndicator							CRITICALITY ignore	TYPE SCGIndicator										PRESENCE optional	},
	...
} 

SCell-ToBeSetupMod-List::= SEQUENCE (SIZE(1..maxnoofSCells)) OF ProtocolIE-SingleContainer { { SCell-ToBeSetupMod-ItemIEs} }
SCell-ToBeRemoved-List::= SEQUENCE (SIZE(1..maxnoofSCells)) OF ProtocolIE-SingleContainer { { SCell-ToBeRemoved-ItemIEs} }
SRBs-ToBeSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-ToBeSetupMod-ItemIEs} }
DRBs-ToBeSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-ToBeSetupMod-ItemIEs} }
BHChannels-ToBeSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-ToBeSetupMod-ItemIEs} }

DRBs-ToBeModified-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-ToBeModified-ItemIEs} }
BHChannels-ToBeModified-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-ToBeModified-ItemIEs} }
SRBs-ToBeReleased-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-ToBeReleased-ItemIEs} }
DRBs-ToBeReleased-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-ToBeReleased-ItemIEs} }
BHChannels-ToBeReleased-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-ToBeReleased-ItemIEs} }

SCell-ToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SCell-ToBeSetupMod-Item			CRITICALITY ignore	TYPE SCell-ToBeSetupMod-Item			PRESENCE mandatory	},
	...
}

SCell-ToBeRemoved-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SCell-ToBeRemoved-Item			CRITICALITY ignore	TYPE SCell-ToBeRemoved-Item			PRESENCE mandatory	},
	...
}


SRBs-ToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-ToBeSetupMod-Item		CRITICALITY reject	TYPE SRBs-ToBeSetupMod-Item		PRESENCE mandatory},
	...
}


DRBs-ToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-ToBeSetupMod-Item		CRITICALITY reject	TYPE DRBs-ToBeSetupMod-Item		PRESENCE mandatory},
	...
}

DRBs-ToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-ToBeModified-Item		CRITICALITY reject	TYPE DRBs-ToBeModified-Item			PRESENCE mandatory},
	...
}


SRBs-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-ToBeReleased-Item	CRITICALITY reject	TYPE SRBs-ToBeReleased-Item		PRESENCE mandatory},
	...
}

DRBs-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-ToBeReleased-Item		CRITICALITY reject	TYPE DRBs-ToBeReleased-Item		PRESENCE mandatory},
	...
}

BHChannels-ToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-ToBeSetupMod-Item		CRITICALITY reject	TYPE BHChannels-ToBeSetupMod-Item		PRESENCE mandatory},
	...
}

BHChannels-ToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-ToBeModified-Item		CRITICALITY reject	TYPE BHChannels-ToBeModified-Item		PRESENCE mandatory},
	...
}

BHChannels-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-ToBeReleased-Item		CRITICALITY reject	TYPE BHChannels-ToBeReleased-Item		PRESENCE mandatory},
	...
}

SLDRBs-ToBeSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-ToBeSetupMod-ItemIEs} }
SLDRBs-ToBeModified-List ::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-ToBeModified-ItemIEs} }
SLDRBs-ToBeReleased-List ::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-ToBeReleased-ItemIEs} }

SLDRBs-ToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-ToBeSetupMod-Item		CRITICALITY reject	TYPE SLDRBs-ToBeSetupMod-Item		PRESENCE mandatory},
	...
}

SLDRBs-ToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-ToBeModified-Item		CRITICALITY reject	TYPE SLDRBs-ToBeModified-Item		PRESENCE mandatory},
	...
}

SLDRBs-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-ToBeReleased-Item		CRITICALITY reject	TYPE SLDRBs-ToBeReleased-Item		PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- UE CONTEXT MODIFICATION RESPONSE
--
-- **************************************************************

UEContextModificationResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextModificationResponseIEs} },
	...
}


UEContextModificationResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-ResourceCoordinationTransferContainer	CRITICALITY ignore	TYPE ResourceCoordinationTransferContainer	PRESENCE optional	}|
	{ ID id-DUtoCURRCInformation					CRITICALITY reject	TYPE DUtoCURRCInformation							PRESENCE optional}|
	{ ID id-DRBs-SetupMod-List						CRITICALITY ignore	TYPE DRBs-SetupMod-List								PRESENCE optional}|
	{ ID id-DRBs-Modified-List						CRITICALITY ignore	TYPE DRBs-Modified-List								PRESENCE optional}|
	{ ID id-SRBs-FailedToBeSetupMod-List			CRITICALITY ignore	TYPE SRBs-FailedToBeSetupMod-List				PRESENCE optional	}|
	{ ID id-DRBs-FailedToBeSetupMod-List			CRITICALITY ignore	TYPE DRBs-FailedToBeSetupMod-List				PRESENCE optional	}|
	{ ID id-SCell-FailedtoSetupMod-List				CRITICALITY ignore	TYPE SCell-FailedtoSetupMod-List				PRESENCE optional	}|
	{ ID id-DRBs-FailedToBeModified-List			CRITICALITY ignore	TYPE DRBs-FailedToBeModified-List				PRESENCE optional	}|
	{ ID id-InactivityMonitoringResponse			CRITICALITY reject	TYPE InactivityMonitoringResponse				PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics					CRITICALITY ignore	TYPE CriticalityDiagnostics						PRESENCE optional	}|
	{ ID id-C-RNTI									CRITICALITY ignore	TYPE C-RNTI											PRESENCE optional	}|
	{ ID id-Associated-SCell-List					CRITICALITY ignore  TYPE Associated-SCell-List						PRESENCE optional	}|
	{ ID id-SRBs-SetupMod-List						CRITICALITY ignore	TYPE SRBs-SetupMod-List								PRESENCE optional	}|
	{ ID id-SRBs-Modified-List						CRITICALITY ignore	TYPE SRBs-Modified-List								PRESENCE optional	}|
	{ ID id-FullConfiguration						CRITICALITY reject	TYPE FullConfiguration								PRESENCE optional	}|
	{ ID id-BHChannels-SetupMod-List				CRITICALITY ignore	TYPE BHChannels-SetupMod-List					PRESENCE optional}|
	{ ID id-BHChannels-Modified-List				CRITICALITY ignore	TYPE BHChannels-Modified-List					PRESENCE optional}|
	{ ID id-BHChannels-FailedToBeSetupMod-List		CRITICALITY ignore	TYPE BHChannels-FailedToBeSetupMod-List		PRESENCE optional	}|
	{ ID id-BHChannels-FailedToBeModified-List		CRITICALITY ignore	TYPE BHChannels-FailedToBeModified-List		PRESENCE optional	}|
	{ ID id-SLDRBs-SetupMod-List					CRITICALITY ignore	TYPE SLDRBs-SetupMod-List							PRESENCE optional	}|
	{ ID id-SLDRBs-Modified-List					CRITICALITY ignore	TYPE SLDRBs-Modified-List							PRESENCE optional	}|
	{ ID id-SLDRBs-FailedToBeSetupMod-List			CRITICALITY ignore	TYPE SLDRBs-FailedToBeSetupMod-List			PRESENCE optional	}|
	{ ID id-SLDRBs-FailedToBeModified-List			CRITICALITY ignore	TYPE SLDRBs-FailedToBeModified-List			PRESENCE optional	}|
	{ ID id-requestedTargetCellGlobalID				CRITICALITY reject	TYPE NRCGI											PRESENCE optional},
	...
}


DRBs-SetupMod-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-SetupMod-ItemIEs} }
DRBs-Modified-List::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-Modified-ItemIEs } } 
SRBs-SetupMod-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-SetupMod-ItemIEs} }
SRBs-Modified-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-Modified-ItemIEs } }
DRBs-FailedToBeModified-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-FailedToBeModified-ItemIEs} }
SRBs-FailedToBeSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-FailedToBeSetupMod-ItemIEs} }
DRBs-FailedToBeSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-FailedToBeSetupMod-ItemIEs} }
SCell-FailedtoSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofSCells)) OF ProtocolIE-SingleContainer { { SCell-FailedtoSetupMod-ItemIEs} }
BHChannels-SetupMod-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-SetupMod-ItemIEs} }
BHChannels-Modified-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-Modified-ItemIEs } } 
BHChannels-FailedToBeModified-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-FailedToBeModified-ItemIEs} }
BHChannels-FailedToBeSetupMod-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-FailedToBeSetupMod-ItemIEs} }

Associated-SCell-List ::= SEQUENCE (SIZE(1.. maxnoofSCells)) OF ProtocolIE-SingleContainer { { Associated-SCell-ItemIEs} }

DRBs-SetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-SetupMod-Item		CRITICALITY ignore		TYPE DRBs-SetupMod-Item		PRESENCE mandatory},
	...
}


DRBs-Modified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-Modified-Item			CRITICALITY ignore	TYPE DRBs-Modified-Item		PRESENCE mandatory},
	...
}

SRBs-SetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-SetupMod-Item		CRITICALITY ignore		TYPE SRBs-SetupMod-Item		PRESENCE mandatory},
	...
}


SRBs-Modified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-Modified-Item			CRITICALITY ignore	TYPE SRBs-Modified-Item		PRESENCE mandatory},
	...
}

SRBs-FailedToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-FailedToBeSetupMod-Item		CRITICALITY ignore	TYPE SRBs-FailedToBeSetupMod-Item		PRESENCE mandatory},
	...
}


DRBs-FailedToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-FailedToBeSetupMod-Item		CRITICALITY ignore	TYPE DRBs-FailedToBeSetupMod-Item		PRESENCE mandatory},
	...
}


DRBs-FailedToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-FailedToBeModified-Item		CRITICALITY ignore	TYPE DRBs-FailedToBeModified-Item		PRESENCE mandatory},
	...
}

SCell-FailedtoSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SCell-FailedtoSetupMod-Item			CRITICALITY ignore	TYPE SCell-FailedtoSetupMod-Item			PRESENCE mandatory},
	...
}

Associated-SCell-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-Associated-SCell-Item			CRITICALITY ignore	TYPE Associated-SCell-Item			PRESENCE mandatory},
	...
}

BHChannels-SetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-SetupMod-Item		CRITICALITY ignore		TYPE BHChannels-SetupMod-Item		PRESENCE mandatory},
	...
}


BHChannels-Modified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-Modified-Item		CRITICALITY ignore	TYPE BHChannels-Modified-Item		PRESENCE mandatory},
	...
}

BHChannels-FailedToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-FailedToBeSetupMod-Item		CRITICALITY ignore	TYPE BHChannels-FailedToBeSetupMod-Item		PRESENCE mandatory},
	...
}

BHChannels-FailedToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-FailedToBeModified-Item		CRITICALITY ignore	TYPE BHChannels-FailedToBeModified-Item		PRESENCE mandatory},
	...
}

SLDRBs-SetupMod-List 			::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-SetupMod-ItemIEs} }
SLDRBs-Modified-List				::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-Modified-ItemIEs } } 
SLDRBs-FailedToBeModified-List 	::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-FailedToBeModified-ItemIEs} }
SLDRBs-FailedToBeSetupMod-List 	::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-FailedToBeSetupMod-ItemIEs} }

SLDRBs-SetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-SetupMod-Item		CRITICALITY ignore		TYPE SLDRBs-SetupMod-Item		PRESENCE mandatory},
	...
}

SLDRBs-Modified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-Modified-Item			CRITICALITY ignore	TYPE SLDRBs-Modified-Item		PRESENCE mandatory},
	...
}

SLDRBs-FailedToBeSetupMod-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-FailedToBeSetupMod-Item		CRITICALITY ignore	TYPE SLDRBs-FailedToBeSetupMod-Item		PRESENCE mandatory},
	...
}

SLDRBs-FailedToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-FailedToBeModified-Item		CRITICALITY ignore	TYPE SLDRBs-FailedToBeModified-Item		PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- UE CONTEXT MODIFICATION FAILURE
--
-- **************************************************************

UEContextModificationFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextModificationFailureIEs} },
	...
}

UEContextModificationFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-Cause							CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics			CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional	}|
	{ ID id-requestedTargetCellGlobalID		CRITICALITY reject	TYPE NRCGI							PRESENCE optional},
	...
}


-- **************************************************************
--
-- UE Context Modification Required (gNB-DU initiated) ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- UE CONTEXT MODIFICATION REQUIRED
--
-- **************************************************************

UEContextModificationRequired ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextModificationRequiredIEs} },
	...
}

UEContextModificationRequiredIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-ResourceCoordinationTransferContainer		CRITICALITY ignore	TYPE ResourceCoordinationTransferContainer		PRESENCE optional	}|
	{ ID id-DUtoCURRCInformation						CRITICALITY reject	TYPE DUtoCURRCInformation							PRESENCE optional}|
	{ ID id-DRBs-Required-ToBeModified-List				CRITICALITY reject	TYPE DRBs-Required-ToBeModified-List				PRESENCE optional}|
	{ ID id-SRBs-Required-ToBeReleased-List				CRITICALITY reject	TYPE SRBs-Required-ToBeReleased-List				PRESENCE optional}|
	{ ID id-DRBs-Required-ToBeReleased-List				CRITICALITY reject	TYPE DRBs-Required-ToBeReleased-List				PRESENCE optional}|
	{ ID id-Cause										CRITICALITY ignore	TYPE Cause												PRESENCE mandatory	}|
	{ ID id-BHChannels-Required-ToBeReleased-List		CRITICALITY reject	TYPE BHChannels-Required-ToBeReleased-List		PRESENCE optional}|
	{ ID id-SLDRBs-Required-ToBeModified-List			CRITICALITY reject	TYPE SLDRBs-Required-ToBeModified-List			PRESENCE optional}|
	{ ID id-SLDRBs-Required-ToBeReleased-List			CRITICALITY reject	TYPE SLDRBs-Required-ToBeReleased-List			PRESENCE optional}|
	{ ID id-targetCellsToCancel							CRITICALITY reject	TYPE TargetCellList										PRESENCE optional},
	...
} 

DRBs-Required-ToBeModified-List::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-Required-ToBeModified-ItemIEs } }
DRBs-Required-ToBeReleased-List::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-Required-ToBeReleased-ItemIEs } }

SRBs-Required-ToBeReleased-List::= SEQUENCE (SIZE(1..maxnoofSRBs)) OF ProtocolIE-SingleContainer { { SRBs-Required-ToBeReleased-ItemIEs } }

BHChannels-Required-ToBeReleased-List ::= SEQUENCE (SIZE(1..maxnoofBHRLCChannels)) OF ProtocolIE-SingleContainer { { BHChannels-Required-ToBeReleased-ItemIEs } }

DRBs-Required-ToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-Required-ToBeModified-Item			CRITICALITY reject	TYPE DRBs-Required-ToBeModified-Item		PRESENCE mandatory},
	...
}

DRBs-Required-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-Required-ToBeReleased-Item			CRITICALITY reject	TYPE DRBs-Required-ToBeReleased-Item		PRESENCE mandatory},
	...
}

SRBs-Required-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SRBs-Required-ToBeReleased-Item			CRITICALITY reject	TYPE SRBs-Required-ToBeReleased-Item			PRESENCE mandatory},
	...
}

BHChannels-Required-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-BHChannels-Required-ToBeReleased-Item			CRITICALITY reject	TYPE BHChannels-Required-ToBeReleased-Item		PRESENCE mandatory},
	...
}

SLDRBs-Required-ToBeModified-List::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-Required-ToBeModified-ItemIEs } }
SLDRBs-Required-ToBeReleased-List::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-Required-ToBeReleased-ItemIEs } }

SLDRBs-Required-ToBeModified-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-Required-ToBeModified-Item			CRITICALITY reject	TYPE SLDRBs-Required-ToBeModified-Item		PRESENCE mandatory},
	...
}

SLDRBs-Required-ToBeReleased-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-Required-ToBeReleased-Item			CRITICALITY reject	TYPE SLDRBs-Required-ToBeReleased-Item		PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- UE CONTEXT MODIFICATION CONFIRM
--
-- **************************************************************

UEContextModificationConfirm::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextModificationConfirmIEs} },
	...
}


UEContextModificationConfirmIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID								PRESENCE mandatory	}|
	{ ID id-ResourceCoordinationTransferContainer		CRITICALITY ignore	TYPE ResourceCoordinationTransferContainer		PRESENCE optional	}|
	{ ID id-DRBs-ModifiedConf-List						CRITICALITY ignore	TYPE DRBs-ModifiedConf-List							PRESENCE optional}|
	{ ID id-RRCContainer								CRITICALITY ignore	TYPE RRCContainer										PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics						CRITICALITY ignore	TYPE CriticalityDiagnostics							PRESENCE optional	}|
	{ ID id-ExecuteDuplication							CRITICALITY ignore	TYPE ExecuteDuplication								PRESENCE optional}|
	{ ID id-ResourceCoordinationTransferInformation		CRITICALITY ignore	TYPE ResourceCoordinationTransferInformation	PRESENCE optional	}|
	{ ID id-SLDRBs-ModifiedConf-List					CRITICALITY ignore	TYPE SLDRBs-ModifiedConf-List						PRESENCE optional},
	...
}

DRBs-ModifiedConf-List::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRBs-ModifiedConf-ItemIEs } }

DRBs-ModifiedConf-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRBs-ModifiedConf-Item		CRITICALITY ignore	TYPE DRBs-ModifiedConf-Item			PRESENCE mandatory},
	...
}

SLDRBs-ModifiedConf-List::= SEQUENCE (SIZE(1..maxnoofSLDRBs)) OF ProtocolIE-SingleContainer { { SLDRBs-ModifiedConf-ItemIEs } }

SLDRBs-ModifiedConf-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-SLDRBs-ModifiedConf-Item		CRITICALITY ignore	TYPE SLDRBs-ModifiedConf-Item			PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- UE CONTEXT MODIFICATION REFUSE
--
-- **************************************************************

UEContextModificationRefuse::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { UEContextModificationRefuseIEs} },
	...
}


UEContextModificationRefuseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-Cause							CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics			CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional	},
	...
}


-- ************************************************************** 
-- 
-- WRITE-REPLACE WARNING ELEMENTARY PROCEDURE 
-- 
-- ************************************************************** 

-- ************************************************************** 
-- 
-- Write-Replace Warning Request 
-- 
-- ************************************************************** 

WriteReplaceWarningRequest ::= SEQUENCE { 
	protocolIEs ProtocolIE-Container { {WriteReplaceWarningRequestIEs} }, 
	... 
} 

WriteReplaceWarningRequestIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID						CRITICALITY reject	TYPE TransactionID								PRESENCE mandatory	}|
	{ ID id-PWSSystemInformation 				CRITICALITY reject	TYPE PWSSystemInformation 						PRESENCE mandatory }| 
	{ ID id-RepetitionPeriod 					CRITICALITY reject	TYPE RepetitionPeriod 							PRESENCE mandatory }| 
	{ ID id-NumberofBroadcastRequest 			CRITICALITY reject	TYPE NumberofBroadcastRequest 				PRESENCE mandatory }| 
	{ ID id-Cells-To-Be-Broadcast-List			CRITICALITY reject	TYPE Cells-To-Be-Broadcast-List				PRESENCE optional	},
	... 
}

Cells-To-Be-Broadcast-List		::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Cells-To-Be-Broadcast-List-ItemIEs } }

Cells-To-Be-Broadcast-List-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Cells-To-Be-Broadcast-Item		CRITICALITY reject	TYPE	Cells-To-Be-Broadcast-Item		PRESENCE mandatory	},
	...
}

-- ************************************************************** 
-- 
-- Write-Replace Warning Response 
-- 
-- ************************************************************** 

WriteReplaceWarningResponse ::= SEQUENCE { 
	protocolIEs ProtocolIE-Container { {WriteReplaceWarningResponseIEs} }, 
	... 
} 

WriteReplaceWarningResponseIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID										PRESENCE mandatory	}|
	{ ID id-Cells-Broadcast-Completed-List			CRITICALITY reject	TYPE Cells-Broadcast-Completed-List				PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics					CRITICALITY ignore	TYPE CriticalityDiagnostics							PRESENCE optional	}|
	{ ID id-Dedicated-SIDelivery-NeededUE-List		CRITICALITY ignore	TYPE Dedicated-SIDelivery-NeededUE-List			PRESENCE optional	},
	...
}

Cells-Broadcast-Completed-List		::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Cells-Broadcast-Completed-List-ItemIEs } }

Cells-Broadcast-Completed-List-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Cells-Broadcast-Completed-Item		CRITICALITY reject	TYPE	Cells-Broadcast-Completed-Item		PRESENCE mandatory	},
	...
}


-- ************************************************************** 
-- 
-- PWS CANCEL ELEMENTARY PROCEDURE 
-- 
-- ************************************************************** 

-- ************************************************************** 
-- 
-- PWS Cancel Request 
-- 
-- ************************************************************** 

PWSCancelRequest ::= SEQUENCE { 
	protocolIEs ProtocolIE-Container { {PWSCancelRequestIEs} }, 
	... 
} 

PWSCancelRequestIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID							CRITICALITY reject TYPE TransactionID									PRESENCE mandatory	}|
	{ ID id-NumberofBroadcastRequest 				CRITICALITY reject TYPE NumberofBroadcastRequest						PRESENCE mandatory }| 
	{ ID id-Broadcast-To-Be-Cancelled-List			CRITICALITY reject TYPE Broadcast-To-Be-Cancelled-List				PRESENCE optional	}|
	{ ID id-Cancel-all-Warning-Messages-Indicator	CRITICALITY reject TYPE Cancel-all-Warning-Messages-Indicator	PRESENCE optional	}|
	{ ID id-NotificationInformation					CRITICALITY reject TYPE NotificationInformation						PRESENCE optional},
	... 
}

Broadcast-To-Be-Cancelled-List		::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Broadcast-To-Be-Cancelled-List-ItemIEs } }

Broadcast-To-Be-Cancelled-List-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Broadcast-To-Be-Cancelled-Item		CRITICALITY reject	TYPE	Broadcast-To-Be-Cancelled-Item		PRESENCE mandatory	},
	...
}

-- ************************************************************** 
-- 
-- PWS Cancel Response 
-- 
-- ************************************************************** 

PWSCancelResponse ::= SEQUENCE { 
	protocolIEs ProtocolIE-Container { {PWSCancelResponseIEs} }, 
	... 
} 

PWSCancelResponseIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID						PRESENCE mandatory	}|
	{ ID id-Cells-Broadcast-Cancelled-List	CRITICALITY reject	TYPE Cells-Broadcast-Cancelled-List	PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics			CRITICALITY ignore	TYPE CriticalityDiagnostics				PRESENCE optional	},
	... 
}

Cells-Broadcast-Cancelled-List		::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { Cells-Broadcast-Cancelled-List-ItemIEs } }

Cells-Broadcast-Cancelled-List-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-Cells-Broadcast-Cancelled-Item		CRITICALITY reject	TYPE	Cells-Broadcast-Cancelled-Item		PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- UE Inactivity Notification ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- UE Inactivity Notification
--
-- **************************************************************

UEInactivityNotification ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ UEInactivityNotificationIEs}},
	...
}

UEInactivityNotificationIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID							PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID							PRESENCE mandatory	}|
	{ ID id-DRB-Activity-List							CRITICALITY reject	TYPE DRB-Activity-List							PRESENCE mandatory	}	,
	...
}

DRB-Activity-List::= SEQUENCE (SIZE(1..maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRB-Activity-ItemIEs } }

DRB-Activity-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRB-Activity-Item			CRITICALITY reject	TYPE DRB-Activity-Item		PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- Initial UL RRC Message Transfer ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- INITIAL UL RRC Message Transfer
--
-- **************************************************************

InitialULRRCMessageTransfer ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ InitialULRRCMessageTransferIEs}},
	...
}

InitialULRRCMessageTransferIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-DU-UE-F1AP-ID					CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID						PRESENCE mandatory	}|
	{ ID id-NRCGI								CRITICALITY reject	TYPE NRCGI									PRESENCE mandatory	}|
	{ ID id-C-RNTI								CRITICALITY reject	TYPE C-RNTI									PRESENCE mandatory	}|
	{ ID id-RRCContainer						CRITICALITY reject	TYPE RRCContainer							PRESENCE mandatory	}|
	{ ID id-DUtoCURRCContainer					CRITICALITY reject	TYPE DUtoCURRCContainer						PRESENCE optional	}|
	{ ID id-SULAccessIndication					CRITICALITY ignore	TYPE SULAccessIndication					PRESENCE optional	}|
	{ ID id-TransactionID						CRITICALITY ignore	TYPE TransactionID							PRESENCE mandatory	}|
	{ ID id-RANUEID								CRITICALITY ignore	TYPE RANUEID								PRESENCE optional	}|
	{ ID id-RRCContainer-RRCSetupComplete		CRITICALITY ignore	TYPE RRCContainer-RRCSetupComplete 		PRESENCE optional	},
	...
}


-- **************************************************************
--
-- DL RRC Message Transfer ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- DL RRC Message Transfer
--
-- **************************************************************

DLRRCMessageTransfer ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ DLRRCMessageTransferIEs}},
	...
}

DLRRCMessageTransferIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID							PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID							CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID							PRESENCE mandatory	}|
	{ ID id-oldgNB-DU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID							PRESENCE optional	}|
	{ ID id-SRBID										CRITICALITY reject	TYPE SRBID											PRESENCE mandatory	}|
	{ ID id-ExecuteDuplication							CRITICALITY ignore	TYPE ExecuteDuplication							PRESENCE optional}|
	{ ID id-RRCContainer								CRITICALITY reject	TYPE RRCContainer									PRESENCE mandatory	}|
	{ ID id-RAT-FrequencyPriorityInformation			CRITICALITY reject	TYPE RAT-FrequencyPriorityInformation		PRESENCE optional	}|
	{ ID id-RRCDeliveryStatusRequest					CRITICALITY ignore	TYPE RRCDeliveryStatusRequest					PRESENCE optional }|
	{ ID id-UEContextNotRetrievable						CRITICALITY reject	TYPE UEContextNotRetrievable					PRESENCE optional }|
	{ ID id-RedirectedRRCmessage						CRITICALITY reject	TYPE OCTET STRING									PRESENCE optional }|
	{ ID id-PLMNAssistanceInfoForNetShar				CRITICALITY ignore	TYPE PLMN-Identity									PRESENCE optional }|
	{ ID id-new-gNB-CU-UE-F1AP-ID						CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID							PRESENCE optional }|
	{ ID id-AdditionalRRMPriorityIndex					CRITICALITY ignore	TYPE AdditionalRRMPriorityIndex				PRESENCE optional },
	...
}
-- **************************************************************
--
-- UL RRC Message Transfer ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- UL RRC Message Transfer
--
-- **************************************************************

ULRRCMessageTransfer ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ ULRRCMessageTransferIEs}},
	...
}

ULRRCMessageTransferIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-SRBID							CRITICALITY reject	TYPE SRBID							PRESENCE mandatory	}|
	{ ID id-RRCContainer					CRITICALITY reject	TYPE RRCContainer					PRESENCE mandatory	}|
	{ ID id-SelectedPLMNID					CRITICALITY reject	TYPE PLMN-Identity					PRESENCE optional		}|
	{ ID id-new-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE optional		},
	...
}

-- **************************************************************
--
-- PRIVATE MESSAGE
--
-- **************************************************************

PrivateMessage ::= SEQUENCE {
	privateIEs		PrivateIE-Container	{{PrivateMessage-IEs}},
	...
}

PrivateMessage-IEs F1AP-PRIVATE-IES ::= {
	...
}


-- **************************************************************
--
-- System Information ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- System information Delivery Command
--
-- **************************************************************

SystemInformationDeliveryCommand ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ SystemInformationDeliveryCommandIEs}},
	...
}

SystemInformationDeliveryCommandIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID			CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-NRCGI					CRITICALITY reject	TYPE NRCGI							PRESENCE mandatory	}|
	{ ID id-SItype-List				CRITICALITY reject	TYPE SItype-List					PRESENCE mandatory	}|
	{ ID id-ConfirmedUEID 			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- Paging PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Paging
--
-- **************************************************************

Paging ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ PagingIEs}},
	...
}

PagingIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-UEIdentityIndexValue	CRITICALITY reject	TYPE UEIdentityIndexValue		PRESENCE mandatory	}|
	{ ID id-PagingIdentity			CRITICALITY reject	TYPE PagingIdentity				PRESENCE mandatory	}|
	{ ID id-PagingDRX				CRITICALITY ignore	TYPE PagingDRX					PRESENCE optional	}|
	{ ID id-PagingPriority			CRITICALITY ignore	TYPE PagingPriority				PRESENCE optional	}|
	{ ID id-PagingCell-List			CRITICALITY ignore	TYPE PagingCell-list			PRESENCE mandatory	}|
	{ ID id-PagingOrigin			CRITICALITY ignore	TYPE PagingOrigin				PRESENCE optional	},
	...
}

PagingCell-list::= SEQUENCE (SIZE(1.. maxnoofPagingCells)) OF ProtocolIE-SingleContainer { { PagingCell-ItemIEs } }

PagingCell-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-PagingCell-Item		CRITICALITY ignore	TYPE PagingCell-Item			PRESENCE mandatory}	,
	...
}



-- **************************************************************
--
-- Notify
--
-- **************************************************************

Notify ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ NotifyIEs}},
	...
}

NotifyIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID					CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID						PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID					CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID						PRESENCE mandatory	}|
	{ ID id-DRB-Notify-List						CRITICALITY reject	TYPE DRB-Notify-List						PRESENCE mandatory	},
	...
}

DRB-Notify-List::= SEQUENCE (SIZE(1.. maxnoofDRBs)) OF ProtocolIE-SingleContainer { { DRB-Notify-ItemIEs } }

DRB-Notify-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DRB-Notify-Item			CRITICALITY reject	TYPE DRB-Notify-Item		PRESENCE mandatory},
	...
}


-- **************************************************************
--
-- NETWORK ACCESS RATE REDUCTION ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Network Access Rate Reduction
--
-- **************************************************************

NetworkAccessRateReduction ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ NetworkAccessRateReductionIEs }},
	...
}

NetworkAccessRateReductionIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID 					CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-UAC-Assistance-Info				CRITICALITY reject	TYPE UAC-Assistance-Info			PRESENCE mandatory	},
	...
}

-- ************************************************************** 
-- 
-- PWS RESTART INDICATION ELEMENTARY PROCEDURE 
-- 
-- ************************************************************** 

-- ************************************************************** 
-- 
-- PWS Restart Indication 
-- 
-- ************************************************************** 

PWSRestartIndication ::= SEQUENCE { 
	protocolIEs ProtocolIE-Container { { PWSRestartIndicationIEs} }, 
	... 
} 

PWSRestartIndicationIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-NR-CGI-List-For-Restart-List	CRITICALITY reject	TYPE NR-CGI-List-For-Restart-List	PRESENCE mandatory	},
	... 
}

NR-CGI-List-For-Restart-List		::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { NR-CGI-List-For-Restart-List-ItemIEs } }

NR-CGI-List-For-Restart-List-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-NR-CGI-List-For-Restart-Item		CRITICALITY reject	TYPE	NR-CGI-List-For-Restart-Item		PRESENCE mandatory	},
	...
}

-- ************************************************************** 
-- 
-- PWS FAILURE INDICATION ELEMENTARY PROCEDURE 
-- 
-- ************************************************************** 

-- ************************************************************** 
-- 
-- PWS Failure Indication 
-- 
-- ************************************************************** 

PWSFailureIndication ::= SEQUENCE { 
	protocolIEs ProtocolIE-Container { { PWSFailureIndicationIEs} }, 
	... 
} 

PWSFailureIndicationIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID			CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-PWS-Failed-NR-CGI-List	CRITICALITY reject	TYPE PWS-Failed-NR-CGI-List		PRESENCE optional	},
	... 
}

PWS-Failed-NR-CGI-List		::= SEQUENCE (SIZE(1.. maxCellingNBDU))	OF ProtocolIE-SingleContainer { { PWS-Failed-NR-CGI-List-ItemIEs } }

PWS-Failed-NR-CGI-List-ItemIEs F1AP-PROTOCOL-IES	::= {
	{ ID id-PWS-Failed-NR-CGI-Item		CRITICALITY reject	TYPE	PWS-Failed-NR-CGI-Item		PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- gNB-DU STATUS INDICATION ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- gNB-DU Status Indication
--
-- **************************************************************

GNBDUStatusIndication ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {GNBDUStatusIndicationIEs} },
	...
}

GNBDUStatusIndicationIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-GNBDUOverloadInformation		CRITICALITY reject	TYPE GNBDUOverloadInformation		PRESENCE mandatory	},
	...
}



-- **************************************************************
--
-- RRC Delivery Report ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- RRC Delivery Report
--
-- **************************************************************

RRCDeliveryReport ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ RRCDeliveryReportIEs}},
	...
}

RRCDeliveryReportIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID	CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID	PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID	CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID	PRESENCE mandatory	}|
	{ ID id-RRCDeliveryStatus	CRITICALITY ignore	TYPE RRCDeliveryStatus	PRESENCE mandatory	}|
	{ ID id-SRBID				CRITICALITY ignore	TYPE SRBID				PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- F1 Removal ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- F1 Removal Request
--
-- **************************************************************

F1RemovalRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ F1RemovalRequestIEs }},
	...
}

F1RemovalRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID			CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- F1 Removal Response
--
-- **************************************************************

F1RemovalResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ F1RemovalResponseIEs }},
	...
}

F1RemovalResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional	},

	...
}

-- **************************************************************
--
-- F1 Removal Failure
--
-- **************************************************************

F1RemovalFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ F1RemovalFailureIEs }},
	...
}

F1RemovalFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional	},

	...
}


-- **************************************************************
--
-- TRACE ELEMENTARY PROCEDURES
--
-- **************************************************************

-- **************************************************************
--
-- TRACE START
--
-- **************************************************************

TraceStart ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ {TraceStartIEs} },
	...
}

TraceStartIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-TraceActivation				CRITICALITY ignore	TYPE TraceActivation				PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- DEACTIVATE TRACE
--
-- **************************************************************

DeactivateTrace ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ {DeactivateTraceIEs} },
	...
}

DeactivateTraceIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-TraceID						CRITICALITY ignore	TYPE TraceID						PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- CELL TRAFFIC TRACE
--
-- **************************************************************

CellTrafficTrace ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ {CellTrafficTraceIEs} },
	...
}

CellTrafficTraceIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ID id-TraceID							CRITICALITY ignore	TYPE TraceID						PRESENCE mandatory	}|
	{ID id-TraceCollectionEntityIPAddress	CRITICALITY ignore	TYPE TransportLayerAddress			PRESENCE mandatory	}|
	{ID id-PrivacyIndicator					CRITICALITY ignore	TYPE PrivacyIndicator				PRESENCE optional	}|

	{ID id-TraceCollectionEntityURI	CRITICALITY ignore	TYPE URI-address		PRESENCE optional	},
	...

}

-- **************************************************************
--
-- DU-CU Radio Information Transfer ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- DU-CU Radio Information Transfer
--
-- **************************************************************

DUCURadioInformationTransfer ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ DUCURadioInformationTransferIEs}},
	...
}

DUCURadioInformationTransferIEs F1AP-PROTOCOL-IES ::= {
		{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID						PRESENCE mandatory	}|
	{ ID id-DUCURadioInformationType		CRITICALITY ignore	TYPE DUCURadioInformationType				PRESENCE mandatory	},
	...
}



-- **************************************************************
--
-- CU-DU Radio Information Transfer ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- CU-DU Radio Information Transfer
--
-- **************************************************************

CUDURadioInformationTransfer ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ CUDURadioInformationTransferIEs}},
	...
}

CUDURadioInformationTransferIEs F1AP-PROTOCOL-IES ::= {
		{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID						PRESENCE mandatory	}|
	{ ID id-CUDURadioInformationType	CRITICALITY ignore	TYPE CUDURadioInformationType				PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- IAB PROCEDURES 
--
-- **************************************************************
-- **************************************************************
--
-- BAP Mapping Configuration ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- BAP MAPPING CONFIGURATION
-- **************************************************************


BAPMappingConfiguration ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container	{ {BAPMappingConfiguration-IEs} },
	...
 }

BAPMappingConfiguration-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID		CRITICALITY reject	TYPE	TransactionID	PRESENCE mandatory}|
	{ ID id-BH-Routing-Information-Added-List		CRITICALITY ignore	TYPE	BH-Routing-Information-Added-List	PRESENCE optional}|
	{ ID id-BH-Routing-Information-Removed-List		CRITICALITY ignore	TYPE	BH-Routing-Information-Removed-List	PRESENCE optional}|
	{ ID id-TrafficMappingInformation				CRITICALITY ignore	TYPE	TrafficMappingInfo						PRESENCE optional},
	...
}

BH-Routing-Information-Added-List ::= SEQUENCE (SIZE(1.. maxnoofRoutingEntries))	OF ProtocolIE-SingleContainer { { BH-Routing-Information-Added-List-ItemIEs } }
BH-Routing-Information-Removed-List ::= SEQUENCE (SIZE(1.. maxnoofRoutingEntries))	OF ProtocolIE-SingleContainer { { BH-Routing-Information-Removed-List-ItemIEs } }

BH-Routing-Information-Added-List-ItemIEs	F1AP-PROTOCOL-IES ::= {
	{ ID id-BH-Routing-Information-Added-List-Item				CRITICALITY ignore	TYPE BH-Routing-Information-Added-List-Item						PRESENCE optional},
	...
}

BH-Routing-Information-Removed-List-ItemIEs	F1AP-PROTOCOL-IES ::= {
	{ ID id-BH-Routing-Information-Removed-List-Item				CRITICALITY ignore	TYPE BH-Routing-Information-Removed-List-Item						PRESENCE optional},
	...
}


-- **************************************************************
--
-- BAP MAPPING CONFIGURATION ACKNOWLEDGE
-- **************************************************************

BAPMappingConfigurationAcknowledge ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ {BAPMappingConfigurationAcknowledge-IEs} },
	... 
}

BAPMappingConfigurationAcknowledge-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID			CRITICALITY reject	TYPE	TransactionID			PRESENCE mandatory}|
	{ ID id-CriticalityDiagnostics	CRITICALITY ignore	TYPE	CriticalityDiagnostics	PRESENCE optional},
	...
}

-- **************************************************************
--
-- BAP MAPPING CONFIGURATION FAILURE
--
-- **************************************************************

BAPMappingConfigurationFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ { BAPMappingConfigurationFailureIEs} },
	...
}

BAPMappingConfigurationFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-TimeToWait					CRITICALITY ignore	TYPE TimeToWait					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}


-- **************************************************************
--
-- GNB-DU Configuration ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- GNB-DU RESOURCE CONFIGURATION
-- **************************************************************


GNBDUResourceConfiguration ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{{ GNBDUResourceConfigurationIEs}},
	...
}


GNBDUResourceConfigurationIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID								PRESENCE mandatory	}|
	{ ID id-Activated-Cells-to-be-Updated-List		CRITICALITY reject	TYPE Activated-Cells-to-be-Updated-List	PRESENCE optional}|
	{ ID id-Child-Nodes-List						CRITICALITY reject	TYPE Child-Nodes-List							PRESENCE optional},
	...
} 




-- **************************************************************
--
-- GNB-DU RESOURCE CONFIGURATION ACKNOWLEDGE
-- **************************************************************


GNBDUResourceConfigurationAcknowledge ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ { GNBDUResourceConfigurationAcknowledgeIEs} },
	...
}


GNBDUResourceConfigurationAcknowledgeIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID						CRITICALITY reject	TYPE TransactionID							PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics				CRITICALITY ignore	TYPE CriticalityDiagnostics					PRESENCE optional	},
	...
}

-- **************************************************************
--
-- GNB-DU RESOURCE CONFIGURATION FAILURE
--
-- **************************************************************

GNBDUResourceConfigurationFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ { GNBDUResourceConfigurationFailureIEs} },
	...
}

GNBDUResourceConfigurationFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-TimeToWait					CRITICALITY ignore	TYPE TimeToWait					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}


-- **************************************************************
--
-- IAB TNL Address Allocation ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- IAB TNL ADDRESS REQUEST
-- **************************************************************



IABTNLAddressRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ {IABTNLAddressRequestIEs} },
	...
}

IABTNLAddressRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID						CRITICALITY reject	TYPE TransactionID								PRESENCE mandatory	}|
	{ ID id-IABv4AddressesRequested				CRITICALITY reject	TYPE IABv4AddressesRequested					PRESENCE optional	}|
	{ ID id-IABIPv6RequestType					CRITICALITY reject	TYPE IABIPv6RequestType							PRESENCE optional	}|
	{ ID id-IAB-TNL-Addresses-To-Remove-List	CRITICALITY reject	TYPE IAB-TNL-Addresses-To-Remove-List		PRESENCE optional	},
	...
}


IAB-TNL-Addresses-To-Remove-List	::= SEQUENCE (SIZE(1..maxnoofTLAsIAB))	OF ProtocolIE-SingleContainer { { IAB-TNL-Addresses-To-Remove-ItemIEs } }

IAB-TNL-Addresses-To-Remove-ItemIEs	F1AP-PROTOCOL-IES::= {
	{ ID id-IAB-TNL-Addresses-To-Remove-Item			CRITICALITY reject	TYPE IAB-TNL-Addresses-To-Remove-Item					PRESENCE mandatory},
	...
}


-- **************************************************************
--
-- IAB TNL ADDRESS RESPONSE
-- **************************************************************


IABTNLAddressResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ {IABTNLAddressResponseIEs} },
	...
}


IABTNLAddressResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID								CRITICALITY reject	TYPE TransactionID									PRESENCE mandatory	}|
	{ ID id-IAB-Allocated-TNL-Address-List				CRITICALITY reject	TYPE IAB-Allocated-TNL-Address-List			PRESENCE mandatory	},
	...
}


IAB-Allocated-TNL-Address-List ::= SEQUENCE (SIZE(1.. maxnoofTLAsIAB))	OF ProtocolIE-SingleContainer { { IAB-Allocated-TNL-Address-List-ItemIEs } }


IAB-Allocated-TNL-Address-List-ItemIEs	F1AP-PROTOCOL-IES::= {
	{ ID id-IAB-Allocated-TNL-Address-Item			CRITICALITY reject	TYPE IAB-Allocated-TNL-Address-Item					PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- IAB TNL ADDRESS FAILURE
--
-- **************************************************************

IABTNLAddressFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ { IABTNLAddressFailureIEs} },
	...
}

IABTNLAddressFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-TimeToWait					CRITICALITY ignore	TYPE TimeToWait					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}

-- **************************************************************
--
-- IAB UP Configuration Update ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- IAB UP Configuration Update Request
--
-- **************************************************************

IABUPConfigurationUpdateRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ { IABUPConfigurationUpdateRequestIEs} },
	...
}

IABUPConfigurationUpdateRequestIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID										PRESENCE mandatory  }|
	{ ID id-UL-UP-TNL-Information-to-Update-List	CRITICALITY ignore	TYPE UL-UP-TNL-Information-to-Update-List		PRESENCE optional	}|
	{ ID id-UL-UP-TNL-Address-to-Update-List		CRITICALITY ignore	TYPE UL-UP-TNL-Address-to-Update-List				PRESENCE optional	},
	...
}

UL-UP-TNL-Information-to-Update-List ::= SEQUENCE (SIZE(1.. maxnoofULUPTNLInformationforIAB))	OF ProtocolIE-SingleContainer { { UL-UP-TNL-Information-to-Update-List-ItemIEs } }

UL-UP-TNL-Information-to-Update-List-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-UL-UP-TNL-Information-to-Update-List-Item	CRITICALITY ignore	TYPE UL-UP-TNL-Information-to-Update-List-Item PRESENCE optional},
	...
}

UL-UP-TNL-Address-to-Update-List ::= SEQUENCE (SIZE(1.. maxnoofUPTNLAddresses))	OF ProtocolIE-SingleContainer { { UL-UP-TNL-Address-to-Update-List-ItemIEs } }

UL-UP-TNL-Address-to-Update-List-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-UL-UP-TNL-Address-to-Update-List-Item	CRITICALITY ignore	TYPE UL-UP-TNL-Address-to-Update-List-Item PRESENCE optional},
	...
}


-- **************************************************************
--
-- IAB UP Configuration Update Response
--
-- **************************************************************

IABUPConfigurationUpdateResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ { IABUPConfigurationUpdateResponseIEs} },
	...
}

IABUPConfigurationUpdateResponseIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID						CRITICALITY reject	TYPE TransactionID							PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics				CRITICALITY ignore	TYPE CriticalityDiagnostics					PRESENCE optional	}|
	{ ID id-DL-UP-TNL-Address-to-Update-List	CRITICALITY reject	TYPE DL-UP-TNL-Address-to-Update-List	PRESENCE optional	},
	...
}

DL-UP-TNL-Address-to-Update-List ::= SEQUENCE (SIZE(1.. maxnoofUPTNLAddresses))	OF ProtocolIE-SingleContainer { { DL-UP-TNL-Address-to-Update-List-ItemIEs } }

DL-UP-TNL-Address-to-Update-List-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-DL-UP-TNL-Address-to-Update-List-Item	CRITICALITY ignore	TYPE DL-UP-TNL-Address-to-Update-List-Item	PRESENCE optional},
	...
}

-- **************************************************************
--
-- IAB UP Configuration Update Failure
--
-- **************************************************************

IABUPConfigurationUpdateFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container		{ { IABUPConfigurationUpdateFailureIEs} },
	...
}

IABUPConfigurationUpdateFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-TimeToWait					CRITICALITY ignore	TYPE TimeToWait					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}

-- **************************************************************
--
-- Resource Status Reporting Initiation ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Resource Status Request
--
-- **************************************************************

ResourceStatusRequest::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { {ResourceStatusRequestIEs} },
	...
}

ResourceStatusRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID			CRITICALITY reject	TYPE TransactionID			PRESENCE mandatory	}|
	{ ID id-gNBCUMeasurementID		CRITICALITY reject	TYPE GNBCUMeasurementID		PRESENCE mandatory	}|
	{ ID id-gNBDUMeasurementID		CRITICALITY ignore	TYPE GNBDUMeasurementID		PRESENCE conditional	}|
	{ ID id-RegistrationRequest		CRITICALITY ignore	TYPE RegistrationRequest	PRESENCE mandatory	}|
	{ ID id-ReportCharacteristics	CRITICALITY ignore	TYPE ReportCharacteristics	PRESENCE conditional	}|
	{ ID id-CellToReportList		CRITICALITY ignore	TYPE CellToReportList		PRESENCE optional	}|
	{ ID id-ReportingPeriodicity	CRITICALITY ignore	TYPE ReportingPeriodicity	PRESENCE  optional	},
	...
}


-- **************************************************************
--
-- Resource Status Response
--
-- **************************************************************

ResourceStatusResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { ResourceStatusResponseIEs} },
	...
}


ResourceStatusResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID			CRITICALITY reject	TYPE TransactionID			PRESENCE mandatory	}|
	{ ID id-gNBCUMeasurementID		CRITICALITY reject	TYPE GNBCUMeasurementID		PRESENCE mandatory	}|
	{ ID id-gNBDUMeasurementID		CRITICALITY ignore	TYPE GNBDUMeasurementID		PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics	CRITICALITY ignore	TYPE CriticalityDiagnostics	PRESENCE optional	},
	...
}


-- **************************************************************
--
-- Resource Status Failure
--
-- **************************************************************

ResourceStatusFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { ResourceStatusFailureIEs} },
	...
}

ResourceStatusFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID			CRITICALITY reject	TYPE TransactionID			PRESENCE mandatory	}|
	{ ID id-gNBCUMeasurementID		CRITICALITY reject	TYPE GNBCUMeasurementID		PRESENCE mandatory	}|
	{ ID id-gNBDUMeasurementID		CRITICALITY ignore	TYPE GNBDUMeasurementID		PRESENCE mandatory	}|
	{ ID id-Cause					CRITICALITY ignore	TYPE Cause					PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics	CRITICALITY ignore	TYPE CriticalityDiagnostics	PRESENCE optional	},
	...
}

-- **************************************************************
--
-- Resource Status Reporting ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Resource Status Update 
--
-- **************************************************************

ResourceStatusUpdate ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ ResourceStatusUpdateIEs}},
	...
}

ResourceStatusUpdateIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID			PRESENCE mandatory	}|
	{ ID id-gNBCUMeasurementID			CRITICALITY reject	TYPE GNBCUMeasurementID				PRESENCE mandatory	}|
	{ ID id-gNBDUMeasurementID			CRITICALITY ignore	TYPE GNBDUMeasurementID			PRESENCE mandatory	}|
	{ ID id-HardwareLoadIndicator			CRITICALITY ignore	TYPE HardwareLoadIndicator			PRESENCE optional	}|
	{ ID id-TNLCapacityIndicator			CRITICALITY ignore	TYPE TNLCapacityIndicator		PRESENCE optional	}|
	{ ID id-CellMeasurementResultList		CRITICALITY ignore	TYPE CellMeasurementResultList	PRESENCE optional	},
	...
}

-- **************************************************************
--
--  Access And Mobility Indication ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Access And Mobility Indication 
--
-- **************************************************************

AccessAndMobilityIndication ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { AccessAndMobilityIndicationIEs} },
	...
}

AccessAndMobilityIndicationIEs F1AP-PROTOCOL-IES ::= { 
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID						PRESENCE mandatory }|
	{ ID id-RACHReportInformationList				CRITICALITY ignore	TYPE RACHReportInformationList			PRESENCE optional }|
	{ ID id-RLFReportInformationList				CRITICALITY ignore	TYPE RLFReportInformationList				PRESENCE optional },
	...
}


-- **************************************************************
--
-- REFERENCE TIME INFORMATION REPORTING CONTROL
--
-- **************************************************************

ReferenceTimeInformationReportingControl::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { ReferenceTimeInformationReportingControlIEs} },
	...
}

ReferenceTimeInformationReportingControlIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-ReportingRequestType		CRITICALITY reject	TYPE ReportingRequestType		PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- REFERENCE TIME INFORMATION REPORT
--
-- **************************************************************

ReferenceTimeInformationReport::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { ReferenceTimeInformationReportIEs} },
	...
}

ReferenceTimeInformationReportIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY ignore	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-TimeReferenceInformation	CRITICALITY ignore	TYPE TimeReferenceInformation		PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- Access Success
--
-- **************************************************************

AccessSuccess ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ AccessSuccessIEs}},
	...
}

AccessSuccessIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID					CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID						PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID					CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID						PRESENCE mandatory	}|
	{ ID id-NRCGI								CRITICALITY reject	TYPE NRCGI									PRESENCE mandatory	},
	...
}


-- **************************************************************
--
-- POSITIONING ASSISTANCE INFORMATION CONTROL ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Assistance Information Control
--
-- **************************************************************

PositioningAssistanceInformationControl ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ PositioningAssistanceInformationControlIEs}},
	...
}

PositioningAssistanceInformationControlIEs F1AP-PROTOCOL-IES ::= {
		{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
		{ ID id-PosAssistance-Information		CRITICALITY reject	TYPE PosAssistance-Information		PRESENCE optional}|
		{ ID id-PosBroadcast					CRITICALITY reject	TYPE PosBroadcast				PRESENCE optional}|
		{ ID id-PositioningBroadcastCells		CRITICALITY reject	TYPE PositioningBroadcastCells		PRESENCE optional}|
		{ ID id-RoutingID						CRITICALITY reject	TYPE RoutingID				PRESENCE optional},
	...
}

-- **************************************************************
--
-- POSITIONING ASSISTANCE INFORMATION FEEDBACK ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Assistance Information Feedback
--
-- **************************************************************

PositioningAssistanceInformationFeedback ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       {{ PositioningAssistanceInformationFeedbackIEs}},
	...
}

PositioningAssistanceInformationFeedbackIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID							PRESENCE mandatory	}|
	{ ID id-PosAssistanceInformationFailureList	CRITICALITY reject	TYPE PosAssistanceInformationFailureList	PRESENCE optional}|
	{ ID id-PositioningBroadcastCells				CRITICALITY reject	TYPE PositioningBroadcastCells				PRESENCE optional}|
	{ ID id-RoutingID								CRITICALITY reject	TYPE RoutingID									PRESENCE optional}|
	{ ID id-CriticalityDiagnostics				CRITICALITY ignore	TYPE CriticalityDiagnostics						PRESENCE optional},
	...
}

-- **************************************************************
--
-- POSITONING MEASUREMENT EXCHANGE ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Measurement Request
--
-- **************************************************************

PositioningMeasurementRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningMeasurementRequestIEs} },
	...
}

PositioningMeasurementRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID									PRESENCE mandatory}|
	{ ID id-LMF-MeasurementID						CRITICALITY reject	TYPE LMF-MeasurementID								PRESENCE mandatory}|
	{ ID id-RAN-MeasurementID						CRITICALITY reject	TYPE RAN-MeasurementID								PRESENCE mandatory}|
	{ ID id-TRP-MeasurementRequestList				CRITICALITY reject	TYPE TRP-MeasurementRequestList					PRESENCE mandatory}|
	{ ID id-PosReportCharacteristics				CRITICALITY reject	TYPE PosReportCharacteristics				PRESENCE mandatory}|
	{ ID id-PosMeasurementPeriodicity				CRITICALITY reject	TYPE MeasurementPeriodicity					PRESENCE conditional }|
	-- The above IE shall be present if the PosReportCharacteristics IE is set to “periodic” --
	{ ID id-PosMeasurementQuantities				CRITICALITY reject	TYPE PosMeasurementQuantities					PRESENCE mandatory}|
	{ ID id-SFNInitialisationTime					CRITICALITY ignore	TYPE RelativeTime1900	PRESENCE optional	}|
	{ ID id-SRSConfiguration						CRITICALITY ignore	TYPE SRSConfiguration								PRESENCE optional}|
	{ ID id-MeasurementBeamInfoRequest				CRITICALITY ignore	TYPE MeasurementBeamInfoRequest	PRESENCE optional	}|
	{ ID id-SystemFrameNumber						CRITICALITY ignore	TYPE SystemFrameNumber		PRESENCE optional}|
	{ ID id-SlotNumber								CRITICALITY ignore	TYPE SlotNumber				PRESENCE optional}|
	{ ID id-PosMeasurementPeriodicityExtended		CRITICALITY reject	TYPE MeasurementPeriodicityExtended			PRESENCE conditional }
	-- The IE shall be present the MeasurementPeriodicity IE is set to the value "extended"
,
	...
} 


-- **************************************************************
--
-- Positioning Measurement Response
--
-- **************************************************************

PositioningMeasurementResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningMeasurementResponseIEs} },
	...
}


PositioningMeasurementResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID							CRITICALITY reject	TYPE TransactionID									PRESENCE mandatory}|
	{ ID id-LMF-MeasurementID						CRITICALITY reject	TYPE LMF-MeasurementID								PRESENCE mandatory}|
	{ ID id-RAN-MeasurementID						CRITICALITY reject	TYPE RAN-MeasurementID								PRESENCE mandatory}|
	{ ID id-PosMeasurementResultList				CRITICALITY reject	TYPE PosMeasurementResultList					PRESENCE optional	}|
	{ ID id-CriticalityDiagnostics					CRITICALITY ignore	TYPE CriticalityDiagnostics						PRESENCE optional	},
	...
}


-- **************************************************************
--
-- Positioning Measurement Failure
--
-- **************************************************************

PositioningMeasurementFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningMeasurementFailureIEs} },
	...
}

PositioningMeasurementFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-LMF-MeasurementID				CRITICALITY reject	TYPE LMF-MeasurementID			PRESENCE mandatory	}|
	{ ID id-RAN-MeasurementID				CRITICALITY reject	TYPE RAN-MeasurementID				PRESENCE mandatory	}|
	{ ID id-Cause							CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics			CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional	},
	...
}


-- **************************************************************
--
-- POSITIONING MEASUREMENT REPORT ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Measurement Report
--
-- **************************************************************

PositioningMeasurementReport ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { PositioningMeasurementReportIEs} },
	...
}

PositioningMeasurementReportIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-LMF-MeasurementID			CRITICALITY reject	TYPE LMF-MeasurementID			PRESENCE mandatory	}|
	{ ID id-RAN-MeasurementID			CRITICALITY reject	TYPE RAN-MeasurementID			PRESENCE mandatory	}|
	{ ID id-PosMeasurementResultList	CRITICALITY reject	TYPE PosMeasurementResultList	PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- POSITIONING MEASUREMENT ABORT ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Measurement Abort
--
-- **************************************************************

PositioningMeasurementAbort ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { PositioningMeasurementAbortIEs} },
	...
}

PositioningMeasurementAbortIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|	
	{ ID id-LMF-MeasurementID				CRITICALITY reject	TYPE LMF-MeasurementID				PRESENCE mandatory	}|
	{ ID id-RAN-MeasurementID				CRITICALITY reject	TYPE RAN-MeasurementID				PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- POSITIONING MEASUREMENT FAILURE INDICATION ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Measurement Failure Indication
--
-- **************************************************************

PositioningMeasurementFailureIndication ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { PositioningMeasurementFailureIndicationIEs} },
	...
}

PositioningMeasurementFailureIndicationIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-LMF-MeasurementID			CRITICALITY reject	TYPE LMF-MeasurementID				PRESENCE mandatory	}|
	{ ID id-RAN-MeasurementID			CRITICALITY reject	TYPE RAN-MeasurementID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	},
	...
}

-- **************************************************************
--
-- POSITIONING MEASUREMENT UPDATE ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Measurement Update
--
-- **************************************************************

PositioningMeasurementUpdate ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { PositioningMeasurementUpdateIEs} },
	...
}

PositioningMeasurementUpdateIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-LMF-MeasurementID			CRITICALITY reject	TYPE LMF-MeasurementID			PRESENCE mandatory	}|
	{ ID id-RAN-MeasurementID			CRITICALITY reject	TYPE RAN-MeasurementID			PRESENCE mandatory	}|
	{ ID id-SRSConfiguration			CRITICALITY ignore	TYPE SRSConfiguration			PRESENCE optional},
	...
}


-- **************************************************************
--
-- TRP INFORMATION EXCHANGE ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- TRP Information Request
--
-- **************************************************************

TRPInformationRequest ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { TRPInformationRequestIEs} },
	...
}

TRPInformationRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID						CRITICALITY reject	TYPE TransactionID								PRESENCE mandatory	}|
	{ ID id-TRPList								CRITICALITY ignore	TYPE TRPList									PRESENCE optional	}|
	{ ID id-TRPInformationTypeListTRPReq		CRITICALITY reject	TYPE TRPInformationTypeListTRPReq			PRESENCE mandatory	},
	...
}

TRPInformationTypeListTRPReq ::= SEQUENCE (SIZE(1.. maxnoofTRPInfoTypes)) OF ProtocolIE-SingleContainer { { TRPInformationTypeItemTRPReq } }

TRPInformationTypeItemTRPReq 	F1AP-PROTOCOL-IES ::= {
	{ ID id-TRPInformationTypeItem	 CRITICALITY reject		TYPE TRPInformationTypeItem  	PRESENCE mandatory },
	...
}


-- **************************************************************
--
-- TRP Information Response
--
-- **************************************************************

TRPInformationResponse ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { TRPInformationResponseIEs} },
	...
}

TRPInformationResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID					CRITICALITY reject	TYPE TransactionID					PRESENCE mandatory	}|
	{ ID id-TRPInformationListTRPResp		CRITICALITY ignore	TYPE TRPInformationListTRPResp		PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics			CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional	},
	...
}

TRPInformationListTRPResp ::= SEQUENCE (SIZE(1.. maxnoofTRPs)) OF ProtocolIE-SingleContainer { { TRPInformationItemTRPResp } }

TRPInformationItemTRPResp 	F1AP-PROTOCOL-IES ::= {
	{ ID id-TRPInformationItem	 CRITICALITY ignore		TYPE TRPInformationItem  	PRESENCE mandatory },
	...
}


-- **************************************************************
--
-- TRP Information Failure
--
-- **************************************************************

TRPInformationFailure ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container		{ { TRPInformationFailureIEs} },
	...
}

TRPInformationFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TransactionID				CRITICALITY reject	TYPE TransactionID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional	},
	...
}


-- **************************************************************
--
-- POSITIONING INFORMATION EXCHANGE ELEMENTARY PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Information Request
--
-- **************************************************************

PositioningInformationRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningInformationRequestIEs} },
	...
}

PositioningInformationRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-RequestedSRSTransmissionCharacteristics	CRITICALITY ignore	TYPE RequestedSRSTransmissionCharacteristics	PRESENCE optional},
	...
} 


-- **************************************************************
--
-- Positioning Information Response
--
-- **************************************************************

PositioningInformationResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningInformationResponseIEs} },
	...
}


PositioningInformationResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|	
	{ ID id-SRSConfiguration			CRITICALITY ignore	TYPE SRSConfiguration			PRESENCE optional}|
	{ ID id-SFNInitialisationTime		CRITICALITY ignore	TYPE RelativeTime1900		PRESENCE optional}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional },
	...
}


-- **************************************************************
--
-- Positioning Information Failure
--
-- **************************************************************

PositioningInformationFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningInformationFailureIEs} },
	...
}

PositioningInformationFailureIEs F1AP-PROTOCOL-IES ::= {
	
	{ ID id-gNB-CU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional },
	...
}


-- **************************************************************
--
-- POSITIONING ACTIVATION PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Activation Request
--
-- **************************************************************

PositioningActivationRequest ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningActivationRequestIEs} },
	...
}

PositioningActivationRequestIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-SRSType					CRITICALITY reject	TYPE SRSType					PRESENCE mandatory	}|
	{ ID id-ActivationTime			CRITICALITY ignore	TYPE RelativeTime1900		PRESENCE optional	},
	...
} 

SRSType ::= CHOICE {
	semipersistentSRS				SemipersistentSRS,
	aperiodicSRS					AperiodicSRS, 
	choice-extension				ProtocolIE-SingleContainer { { SRSType-ExtIEs} }
}

SRSType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

SemipersistentSRS ::= SEQUENCE {
	sRSResourceSetID			SRSResourceSetID,
	sRSSpatialRelation			SpatialRelationInfo	OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { {SemipersistentSRS-ExtIEs} } OPTIONAL,
	...
}

SemipersistentSRS-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-SRSSpatialRelationPerSRSResource	CRITICALITY ignore	EXTENSION SpatialRelationPerSRSResource PRESENCE optional},
	...
}

AperiodicSRS ::= SEQUENCE {
	aperiodic					ENUMERATED {true, ...},
	sRSResourceTrigger			SRSResourceTrigger		OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { {AperiodicSRS-ExtIEs} } OPTIONAL,
	...
}

AperiodicSRS-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


-- **************************************************************
--
-- Positioning Activation Response
--
-- **************************************************************

PositioningActivationResponse ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningActivationResponseIEs} },
	...
}


PositioningActivationResponseIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-SystemFrameNumber		CRITICALITY ignore	TYPE SystemFrameNumber			PRESENCE optional }|
	{ ID id-SlotNumber				CRITICALITY ignore	TYPE SlotNumber					PRESENCE optional }|
	{ ID id-CriticalityDiagnostics	CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional },
	...
}




-- **************************************************************
--
-- Positioning Activation Failure
--
-- **************************************************************

PositioningActivationFailure ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningActivationFailureIEs} },
	...
}

PositioningActivationFailureIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional },
	...
}


-- **************************************************************
--
-- POSITIONING DEACTIVATION PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Deactivation
--
-- **************************************************************

PositioningDeactivation ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningDeactivationIEs} },
	...
}

PositioningDeactivationIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-AbortTransmission		CRITICALITY ignore	TYPE AbortTransmission			PRESENCE mandatory	},
	...
} 

-- **************************************************************
--
-- POSITIONING INFORMATION UPDATE PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- Positioning Information Update
--
-- **************************************************************

PositioningInformationUpdate ::= SEQUENCE {
	protocolIEs			ProtocolIE-Container       { { PositioningInformationUpdateIEs} },
	...
}


PositioningInformationUpdateIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID		CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-SRSConfiguration		CRITICALITY ignore	TYPE SRSConfiguration			PRESENCE optional}|
	{ ID id-SFNInitialisationTime	CRITICALITY ignore	TYPE RelativeTime1900		PRESENCE optional},
	...
}

-- **************************************************************
--
-- E-CID MEASUREMENT PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- E-CID Measurement Initiation Request
--
-- **************************************************************

E-CIDMeasurementInitiationRequest ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container	{{E-CIDMeasurementInitiationRequest-IEs}},
	...
}

E-CIDMeasurementInitiationRequest-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID					PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID				CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID					PRESENCE mandatory	}|
	{ ID id-LMF-UE-MeasurementID			CRITICALITY reject	TYPE LMF-UE-MeasurementID				PRESENCE mandatory	}|
	{ ID id-RAN-UE-MeasurementID			CRITICALITY reject	TYPE RAN-UE-MeasurementID				PRESENCE mandatory	}|
	{ ID id-E-CID-ReportCharacteristics		CRITICALITY reject	TYPE E-CID-ReportCharacteristics		PRESENCE mandatory	}|
	{ ID id-E-CID-MeasurementPeriodicity	CRITICALITY reject	TYPE MeasurementPeriodicity		PRESENCE conditional	}|
-- The above IE shall be present if the E-CID-ReportCharacteristics IE is set to “periodic” –-
	{ ID id-E-CID-MeasurementQuantities		CRITICALITY reject	TYPE E-CID-MeasurementQuantities		PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- E-CID Measurement Initiation Response
--
-- **************************************************************

E-CIDMeasurementInitiationResponse ::= SEQUENCE {
	protocolIEs		ProtocolIE-Container	{{E-CIDMeasurementInitiationResponse-IEs}},
	...
}

E-CIDMeasurementInitiationResponse-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-LMF-UE-MeasurementID		CRITICALITY reject	TYPE LMF-UE-MeasurementID				PRESENCE mandatory	}|
	{ ID id-RAN-UE-MeasurementID		CRITICALITY reject	TYPE RAN-UE-MeasurementID				PRESENCE mandatory	}|
	{ ID id-E-CID-MeasurementResult		CRITICALITY ignore	TYPE E-CID-MeasurementResult		PRESENCE optional}|
	{ ID id-Cell-Portion-ID				CRITICALITY ignore	TYPE Cell-Portion-ID				PRESENCE optional}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics		PRESENCE optional},
	...
}

-- **************************************************************
--
-- E-CID Measurement Initiation Failure
--
-- **************************************************************

E-CIDMeasurementInitiationFailure ::= SEQUENCE {
	protocolIEs						ProtocolIE-Container		{{E-CIDMeasurementInitiationFailure-IEs}},
	...
}


E-CIDMeasurementInitiationFailure-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-LMF-UE-MeasurementID		CRITICALITY reject	TYPE LMF-UE-MeasurementID			PRESENCE mandatory	}|
	{ ID id-RAN-UE-MeasurementID		CRITICALITY reject	TYPE RAN-UE-MeasurementID			PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause							PRESENCE mandatory	}|
	{ ID id-CriticalityDiagnostics		CRITICALITY ignore	TYPE CriticalityDiagnostics			PRESENCE optional},
	...
}

-- **************************************************************
--
-- E-CID MEASUREMENT FAILURE INDICATION PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- E-CID Measurement Failure Indication
--
-- **************************************************************

E-CIDMeasurementFailureIndication ::= SEQUENCE {
	protocolIEs						ProtocolIE-Container		{{E-CIDMeasurementFailureIndication-IEs}},
	...
}


E-CIDMeasurementFailureIndication-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID			PRESENCE mandatory	}|
	{ ID id-LMF-UE-MeasurementID		CRITICALITY reject	TYPE LMF-UE-MeasurementID		PRESENCE mandatory	}|
	{ ID id-RAN-UE-MeasurementID		CRITICALITY reject	TYPE RAN-UE-MeasurementID		PRESENCE mandatory	}|
	{ ID id-Cause						CRITICALITY ignore	TYPE Cause						PRESENCE mandatory},
	...
}

-- **************************************************************
--
-- E-CID MEASUREMENT REPORT PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- E-CID Measurement Report
--
-- **************************************************************

E-CIDMeasurementReport ::= SEQUENCE {
	protocolIEs						ProtocolIE-Container		{{E-CIDMeasurementReport-IEs}},
	...
}


E-CIDMeasurementReport-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID				PRESENCE mandatory	}|
	{ ID id-LMF-UE-MeasurementID		CRITICALITY reject	TYPE LMF-UE-MeasurementID				PRESENCE mandatory	}|
	{ ID id-RAN-UE-MeasurementID		CRITICALITY reject	TYPE RAN-UE-MeasurementID				PRESENCE mandatory	}|
	{ ID id-E-CID-MeasurementResult		CRITICALITY ignore	TYPE E-CID-MeasurementResult		PRESENCE mandatory }|
	{ ID id-Cell-Portion-ID				CRITICALITY ignore	TYPE Cell-Portion-ID				PRESENCE optional},

	...
}

-- **************************************************************
--
-- E-CID MEASUREMENT TERMINATION PROCEDURE
--
-- **************************************************************

-- **************************************************************
--
-- E-CID Measurement Termination Command
--
-- **************************************************************


E-CIDMeasurementTerminationCommand ::= SEQUENCE {
	protocolIEs						ProtocolIE-Container		{{E-CIDMeasurementTerminationCommand-IEs}},
	...
}


E-CIDMeasurementTerminationCommand-IEs F1AP-PROTOCOL-IES ::= {
	{ ID id-gNB-CU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-CU-UE-F1AP-ID					PRESENCE mandatory	}|
	{ ID id-gNB-DU-UE-F1AP-ID			CRITICALITY reject	TYPE GNB-DU-UE-F1AP-ID					PRESENCE mandatory	}|
	{ ID id-LMF-UE-MeasurementID		CRITICALITY reject	TYPE LMF-UE-MeasurementID				PRESENCE mandatory	}|
	{ ID id-RAN-UE-MeasurementID		CRITICALITY reject	TYPE RAN-UE-MeasurementID				PRESENCE mandatory	},
	...
}



END
-- ASN1STOP 

9.4.5	Information Element Definitions
-- ASN1START 
-- **************************************************************
--
-- Information Element Definitions
--
-- **************************************************************

F1AP-IEs {
itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) 
ngran-access (22) modules (3) f1ap (3) version1 (1) f1ap-IEs (2) }

DEFINITIONS AUTOMATIC TAGS ::= 

BEGIN

IMPORTS
	id-gNB-CUSystemInformation,
	id-HandoverPreparationInformation,
	id-TAISliceSupportList,
	id-RANAC,
	id-BearerTypeChange,
	id-Cell-Direction,
	id-Cell-Type,
	id-CellGroupConfig,
	id-AvailablePLMNList,
	id-PDUSessionID,
	id-ULPDUSessionAggregateMaximumBitRate, 
	id-DC-Based-Duplication-Configured,
	id-DC-Based-Duplication-Activation,
	id-Duplication-Activation,
	id-DLPDCPSNLength,
	id-ULPDCPSNLength,
	id-RLC-Status,
	id-MeasurementTimingConfiguration,
	id-DRB-Information,
	id-QoSFlowMappingIndication,
	id-ServingCellMO,
	id-RLCMode,
	id-ExtendedServedPLMNs-List,
	id-ExtendedAvailablePLMN-List,
	id-DRX-LongCycleStartOffset,
	id-SelectedBandCombinationIndex,
	id-SelectedFeatureSetEntryIndex,
	id-Ph-InfoSCG,
	id-latest-RRC-Version-Enhanced,
	id-RequestedBandCombinationIndex,
	id-RequestedFeatureSetEntryIndex,
	id-DRX-Config,
	id-UEAssistanceInformation,
	id-PDCCH-BlindDetectionSCG,
	id-Requested-PDCCH-BlindDetectionSCG,
	id-BPLMN-ID-Info-List,
	id-NotificationInformation,
	id-TNLAssociationTransportLayerAddressgNBDU,
	id-portNumber,
	id-AdditionalSIBMessageList,
	id-IgnorePRACHConfiguration,
	id-CG-Config,
	id-Ph-InfoMCG,
	id-AggressorgNBSetID,
	id-VictimgNBSetID,
	id-MeasGapSharingConfig,
	id-systemInformationAreaID,
	id-areaScope,
	id-IntendedTDD-DL-ULConfig,
	id-QosMonitoringRequest,
	id-BHInfo,
	id-IAB-Info-IAB-DU,
	id-IAB-Info-IAB-donor-CU,
	id-IAB-Barred,
	id-SIB12-message,
	id-SIB13-message,
	id-SIB14-message,
	id-UEAssistanceInformationEUTRA,
	id-SL-PHY-MAC-RLC-Config,
	id-SL-ConfigDedicatedEUTRA-Info,
	id-AlternativeQoSParaSetList,
	id-CurrentQoSParaSetIndex,
	id-CarrierList,
	id-ULCarrierList,
	id-FrequencyShift7p5khz,
	id-SSB-PositionsInBurst,
	id-NRPRACHConfig, 
	id-TDD-UL-DLConfigCommonNR,
	id-CNPacketDelayBudgetDownlink,
	id-CNPacketDelayBudgetUplink,
	id-ExtendedPacketDelayBudget,
	id-TSCTrafficCharacteristics,
	id-AdditionalPDCPDuplicationTNL-List,
	id-RLCDuplicationInformation,
	id-AdditionalDuplicationIndication,
	id-mdtConfiguration,
	id-TraceCollectionEntityURI,
	id-NID,
	id-NPNSupportInfo,
	id-NPNBroadcastInformation,
	id-AvailableSNPN-ID-List,
	id-SIB10-message,
	id-RequestedP-MaxFR2,
	id-DLCarrierList,
	id-ExtendedTAISliceSupportList,
	id-E-CID-MeasurementQuantities-Item,
	id-ConfiguredTACIndication,
	id-NRCGI,
	id-SFN-Offset,
	id-TransmissionStopIndicator,
	id-SrsFrequency,
	id-EstimatedArrivalProbability,
	id-TRPType,
	id-SRSSpatialRelationPerSRSResource,
	id-PDCPTerminatingNodeDLTNLAddrInfo,
	id-ENBDLTNLAddress,
	id-PRS-Resource-ID,
	id-LocationMeasurementInformation,
	maxNRARFCN,
	maxnoofErrors,
	maxnoofBPLMNs,
	maxnoofBPLMNsNR,
	maxnoofDLUPTNLInformation,
	maxnoofNrCellBands,
	maxnoofULUPTNLInformation,
	maxnoofQoSFlows,
	maxnoofSliceItems,
	maxnoofSIBTypes,
	maxnoofSITypes,
	maxCellineNB,
	maxnoofExtendedBPLMNs,
	maxnoofAdditionalSIBs,
	maxnoofUACPLMNs,
	maxnoofUACperPLMN,
	maxCellingNBDU,
	maxnoofTLAs,
	maxnoofGTPTLAs,
	maxnoofslots,
	maxnoofNonUPTrafficMappings,
	maxnoofServingCells,
	maxnoofServedCellsIAB,
	maxnoofChildIABNodes,
	maxnoofIABSTCInfo,
	maxnoofSymbols,
	maxnoofDUFSlots,
	maxnoofHSNASlots,
	maxnoofEgressLinks,
	maxnoofMappingEntries,
	maxnoofDSInfo,
	maxnoofQoSParaSets,
	maxnoofPC5QoSFlows,
	maxnoofSSBAreas,
	maxnoofNRSCSs,
	maxnoofPhysicalResourceBlocks,
	maxnoofPhysicalResourceBlocks-1,
	maxnoofPRACHconfigs,
	maxnoofRACHReports,
	maxnoofRLFReports,
	maxnoofAdditionalPDCPDuplicationTNL,
	maxnoofRLCDuplicationState,
	maxnoofCHOcells,
	maxnoofMDTPLMNs,
	maxnoofCAGsupported,
	maxnoofNIDsupported,
	maxnoofExtSliceItems,
	maxnoofPosMeas,
	maxnoofTRPInfoTypes,
	maxnoofSRSTriggerStates,
	maxnoofSpatialRelations,
	maxnoBcastCell,
	maxnoofTRPs,
	maxnoofAngleInfo,
	maxnooflcs-gcs-translation,
	maxnoofPath,
	maxnoofMeasE-CID,
	maxnoofSSBs,
	maxnoSRS-ResourceSets,
	maxnoSRS-ResourcePerSet,
	maxnoSRS-Carriers,
	maxnoSCSs,
	maxnoSRS-Resources,
	maxnoSRS-PosResources,
	maxnoSRS-PosResourceSets,
	maxnoSRS-PosResourcePerSet,
	maxnoofPRS-ResourceSets,
	maxnoofPRS-ResourcesPerSet,
	maxNoOfMeasTRPs,
	maxnoofPRSresourceSets,
	maxnoofPRSresources



FROM F1AP-Constants

	Criticality,
	ProcedureCode,
	ProtocolIE-ID,
	TriggeringMessage

FROM F1AP-CommonDataTypes

	ProtocolExtensionContainer{},
	F1AP-PROTOCOL-EXTENSION,
	ProtocolIE-SingleContainer{},
	F1AP-PROTOCOL-IES

FROM F1AP-Containers;

-- A

AbortTransmission ::= CHOICE {
	sRSResourceSetID		SRSResourceSetID,
	releaseALL				NULL,
	choice-extension		ProtocolIE-SingleContainer { { AbortTransmission-ExtIEs } }
}

AbortTransmission-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

AccessPointPosition ::= SEQUENCE {
	latitudeSign				ENUMERATED {north, south},
	latitude					INTEGER (0..8388607),
	longitude					INTEGER (-8388608..8388607),
	directionOfAltitude			ENUMERATED {height, depth},
	altitude					INTEGER (0..32767),
	uncertaintySemi-major		INTEGER (0..127),
	uncertaintySemi-minor		INTEGER (0..127),
	orientationOfMajorAxis		INTEGER (0..179),
	uncertaintyAltitude			INTEGER (0..127),
	confidence					INTEGER (0..100),
	iE-Extensions				ProtocolExtensionContainer { { AccessPointPosition-ExtIEs} } OPTIONAL
}

AccessPointPosition-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Activated-Cells-to-be-Updated-List ::= SEQUENCE (SIZE(1..maxnoofServedCellsIAB)) OF Activated-Cells-to-be-Updated-List-Item

Activated-Cells-to-be-Updated-List-Item ::=	SEQUENCE{
	nRCGI								NRCGI,
	iAB-DU-Cell-Resource-Configuration-Mode-Info	IAB-DU-Cell-Resource-Configuration-Mode-Info,
	iE-Extensions						ProtocolExtensionContainer { { Activated-Cells-to-be-Updated-List-Item-ExtIEs} } OPTIONAL
}

Activated-Cells-to-be-Updated-List-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ActiveULBWP  ::= SEQUENCE {
	locationAndBandwidth		INTEGER (0..37949,...),
	subcarrierSpacing           ENUMERATED {kHz15, kHz30, kHz60, kHz120,...},
	cyclicPrefix				ENUMERATED {normal, extended},
	txDirectCurrentLocation		INTEGER (0..3301,...),
	shift7dot5kHz				ENUMERATED {true, ...} OPTIONAL,
	sRSConfig					SRSConfig,
	iE-Extensions					ProtocolExtensionContainer { { ActiveULBWP-ExtIEs} } OPTIONAL
}

ActiveULBWP-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AdditionalDuplicationIndication ::= ENUMERATED { 
	three,
	four,
	...
}


AdditionalPath-List::= SEQUENCE (SIZE(1..maxnoofPath)) OF AdditionalPath-Item

AdditionalPath-Item ::=SEQUENCE {
	relativePathDelay	RelativePathDelay, 
	pathQuality			TRPMeasurementQuality 	OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { { AdditionalPath-Item-ExtIEs } }	OPTIONAL
}

AdditionalPath-Item-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


AdditionalPDCPDuplicationTNL-List ::= SEQUENCE (SIZE(1..maxnoofAdditionalPDCPDuplicationTNL)) OF AdditionalPDCPDuplicationTNL-Item

AdditionalPDCPDuplicationTNL-Item ::=SEQUENCE {
	additionalPDCPDuplicationUPTNLInformation		UPTransportLayerInformation, 
	iE-Extensions	ProtocolExtensionContainer { { AdditionalPDCPDuplicationTNL-ItemExtIEs } }	OPTIONAL,
	...
}

AdditionalPDCPDuplicationTNL-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
{ ID id-BHInfo		CRITICALITY ignore	EXTENSION BHInfo		PRESENCE optional	},
	...
}

AdditionalSIBMessageList ::= SEQUENCE (SIZE(1..maxnoofAdditionalSIBs)) OF AdditionalSIBMessageList-Item

AdditionalSIBMessageList-Item ::= SEQUENCE {
	additionalSIB			OCTET STRING,
	iE-Extensions		ProtocolExtensionContainer { { AdditionalSIBMessageList-Item-ExtIEs} } OPTIONAL
}

AdditionalSIBMessageList-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AdditionalRRMPriorityIndex ::= BIT STRING (SIZE(32))

AggressorCellList ::= SEQUENCE (SIZE(1..maxCellingNBDU)) OF AggressorCellList-Item

AggressorCellList-Item ::= SEQUENCE {
	aggressorCell-ID		NRCGI,
	iE-Extensions	ProtocolExtensionContainer { { AggressorCellList-Item-ExtIEs } }		OPTIONAL
}

AggressorCellList-Item-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AggressorgNBSetID ::= SEQUENCE {
	aggressorgNBSetID		GNBSetID,
	iE-Extensions	ProtocolExtensionContainer { { AggressorgNBSetID-ExtIEs } }	OPTIONAL
}

AggressorgNBSetID-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AllocationAndRetentionPriority ::= SEQUENCE {
	priorityLevel				PriorityLevel,
	pre-emptionCapability		Pre-emptionCapability,
	pre-emptionVulnerability	Pre-emptionVulnerability,
	iE-Extensions				ProtocolExtensionContainer { {AllocationAndRetentionPriority-ExtIEs} } OPTIONAL,
	...
}

AllocationAndRetentionPriority-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AlternativeQoSParaSetList ::= SEQUENCE (SIZE(1..maxnoofQoSParaSets)) OF AlternativeQoSParaSetItem

AlternativeQoSParaSetItem ::= SEQUENCE {
	alternativeQoSParaSetIndex			QoSParaSetIndex,
	guaranteedFlowBitRateDL				BitRate					OPTIONAL,
	guaranteedFlowBitRateUL				BitRate					OPTIONAL,
	packetDelayBudget					PacketDelayBudget		OPTIONAL,
	packetErrorRate						PacketErrorRate			OPTIONAL,
	iE-Extensions						ProtocolExtensionContainer { {AlternativeQoSParaSetItem-ExtIEs} }	OPTIONAL,
	...
}

AlternativeQoSParaSetItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


AngleMeasurementQuality ::= SEQUENCE {
	azimuthQuality	INTEGER(0..255),
	zenithQuality	INTEGER(0..255) OPTIONAL,
	resolution		ENUMERATED{deg0dot1,...},
	iE-Extensions	ProtocolExtensionContainer { { AngleMeasurementQuality-ExtIEs } }	OPTIONAL
}

AngleMeasurementQuality-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


AperiodicSRSResourceTriggerList ::= SEQUENCE (SIZE(1..maxnoofSRSTriggerStates)) OF AperiodicSRSResourceTrigger

AperiodicSRSResourceTrigger ::= INTEGER (1..3)

Associated-SCell-Item ::= SEQUENCE {
	sCell-ID		NRCGI,
	iE-Extensions	ProtocolExtensionContainer { { Associated-SCell-ItemExtIEs } }	OPTIONAL
}

Associated-SCell-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AvailablePLMNList ::= SEQUENCE (SIZE(1..maxnoofBPLMNs)) OF AvailablePLMNList-Item

AvailablePLMNList-Item ::= SEQUENCE {
	pLMNIdentity			PLMN-Identity,
	iE-Extensions		ProtocolExtensionContainer { { AvailablePLMNList-Item-ExtIEs} } OPTIONAL
}

AvailablePLMNList-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AvailableSNPN-ID-List ::= SEQUENCE (SIZE(1..maxnoofNIDsupported)) OF AvailableSNPN-ID-List-Item

AvailableSNPN-ID-List-Item ::= SEQUENCE {
	pLMN-Identity				PLMN-Identity,
	availableNIDList			BroadcastNIDList,
	iE-Extensions				ProtocolExtensionContainer { { AvailableSNPN-ID-List-ItemExtIEs} } OPTIONAL,
	...
}

AvailableSNPN-ID-List-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

AveragingWindow  ::= INTEGER (0..4095, ...) 

AreaScope ::= ENUMERATED {true, ...}

-- B

BandwidthSRS ::= CHOICE { 
	fR1								FR1-Bandwidth,
	fR2								FR2-Bandwidth,
	choice-extension				ProtocolIE-SingleContainer {{ BandwidthSRS-ExtIEs }}
}

BandwidthSRS-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}


BAPAddress ::= BIT STRING (SIZE(10))

BAPCtrlPDUChannel ::= ENUMERATED {true, ...}

BAPlayerBHRLCchannelMappingInfo ::= SEQUENCE {
	bAPlayerBHRLCchannelMappingInfoToAdd			BAPlayerBHRLCchannelMappingInfoList			OPTIONAL,
	bAPlayerBHRLCchannelMappingInfoToRemove			MappingInformationtoRemove					OPTIONAL,
	iE-Extensions									ProtocolExtensionContainer { { BAPlayerBHRLCchannelMappingInfo-ExtIEs} } OPTIONAL,
	...
}

BAPlayerBHRLCchannelMappingInfo-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BAPlayerBHRLCchannelMappingInfoList ::= SEQUENCE (SIZE(1..maxnoofMappingEntries)) OF BAPlayerBHRLCchannelMappingInfo-Item

BAPlayerBHRLCchannelMappingInfo-Item ::= SEQUENCE {
	mappingInformationIndex			MappingInformationIndex,		
	priorHopBAPAddress				BAPAddress		OPTIONAL,		
	ingressbHRLCChannelID			BHRLCChannelID		OPTIONAL,		
	nextHopBAPAddress				BAPAddress		OPTIONAL,		
	egressbHRLCChannelID			BHRLCChannelID		OPTIONAL,		
	iE-Extensions					ProtocolExtensionContainer { { BAPlayerBHRLCchannelMappingInfo-ItemExtIEs} } OPTIONAL,
	...
}

BAPlayerBHRLCchannelMappingInfo-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BAPPathID ::= BIT STRING (SIZE(10))

BAPRoutingID ::= SEQUENCE {
	bAPAddress		BAPAddress,
	bAPPathID		BAPPathID,
	iE-Extensions	ProtocolExtensionContainer { { BAPRoutingIDExtIEs } }	OPTIONAL
}

BAPRoutingIDExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BitRate ::= INTEGER (0..4000000000000,...)

BearerTypeChange ::= ENUMERATED {true, ...}

BHRLCChannelID ::= BIT STRING (SIZE(16))

BHChannels-FailedToBeModified-Item ::= SEQUENCE {
	bHRLCChannelID		BHRLCChannelID,
	cause		Cause		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-FailedToBeModified-ItemExtIEs } }	OPTIONAL
}

BHChannels-FailedToBeModified-ItemExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-FailedToBeSetup-Item ::= SEQUENCE {
	bHRLCChannelID		BHRLCChannelID,
	cause	Cause	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-FailedToBeSetup-ItemExtIEs } }	OPTIONAL
}

BHChannels-FailedToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-FailedToBeSetupMod-Item ::= SEQUENCE {
	bHRLCChannelID		BHRLCChannelID,
	cause		Cause			OPTIONAL ,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-FailedToBeSetupMod-ItemExtIEs } }	OPTIONAL
}

BHChannels-FailedToBeSetupMod-ItemExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-Modified-Item ::= SEQUENCE {
	bHRLCChannelID			BHRLCChannelID,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-Modified-ItemExtIEs } }	OPTIONAL
}

BHChannels-Modified-ItemExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-Required-ToBeReleased-Item ::= SEQUENCE {
	bHRLCChannelID		BHRLCChannelID,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-Required-ToBeReleased-ItemExtIEs } }	OPTIONAL
}

BHChannels-Required-ToBeReleased-ItemExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-Setup-Item ::= SEQUENCE {
	bHRLCChannelID							BHRLCChannelID,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-Setup-ItemExtIEs } }	OPTIONAL
}

BHChannels-Setup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-SetupMod-Item ::= SEQUENCE {
	bHRLCChannelID							BHRLCChannelID,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-SetupMod-ItemExtIEs } }	OPTIONAL
}

BHChannels-SetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-ToBeModified-Item ::= SEQUENCE {
	bHRLCChannelID					BHRLCChannelID,
	bHQoSInformation				BHQoSInformation,
	rLCmode				RLCMode	OPTIONAL,
	bAPCtrlPDUChannel	BAPCtrlPDUChannel		OPTIONAL,
	trafficMappingInfo	TrafficMappingInfo		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-ToBeModified-ItemExtIEs } }	OPTIONAL
}

BHChannels-ToBeModified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-ToBeReleased-Item ::= SEQUENCE {
	bHRLCChannelID		BHRLCChannelID,
	iE-Extensions	ProtocolExtensionContainer { { BHChannels-ToBeReleased-ItemExtIEs } }	OPTIONAL
}

BHChannels-ToBeReleased-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-ToBeSetup-Item ::= SEQUENCE	{
	bHRLCChannelID						BHRLCChannelID,
	bHQoSInformation					BHQoSInformation,
	rLCmode								RLCMode,
	bAPCtrlPDUChannel					BAPCtrlPDUChannel		OPTIONAL,
	trafficMappingInfo					TrafficMappingInfo		OPTIONAL,
	iE-Extensions						ProtocolExtensionContainer { { BHChannels-ToBeSetup-ItemExtIEs } }	OPTIONAL
}

BHChannels-ToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHChannels-ToBeSetupMod-Item ::= SEQUENCE {
	bHRLCChannelID				BHRLCChannelID,
	bHQoSInformation			BHQoSInformation,
	rLCmode				RLCMode,
	bAPCtrlPDUChannel	BAPCtrlPDUChannel		OPTIONAL,
	trafficMappingInfo	TrafficMappingInfo		OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { { BHChannels-ToBeSetupMod-ItemExtIEs } }	OPTIONAL
}

BHChannels-ToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHInfo ::= SEQUENCE {
	bAProutingID			BAPRoutingID 	OPTIONAL,
	egressBHRLCCHList		EgressBHRLCCHList	OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer { { BHInfo-ExtIEs} } OPTIONAL
}

BHInfo-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BHQoSInformation ::= CHOICE {
	bHRLCCHQoS					QoSFlowLevelQoSParameters,	
	eUTRANBHRLCCHQoS			EUTRANQoS,
	cPTrafficType				CPTrafficType,
	choice-extension			ProtocolIE-SingleContainer { { BHQoSInformation-ExtIEs} }
}

BHQoSInformation-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

BH-Routing-Information-Added-List-Item ::= SEQUENCE {
	bAPRoutingID				BAPRoutingID,
	nextHopBAPAddress			BAPAddress,
	iE-Extensions				ProtocolExtensionContainer { { BH-Routing-Information-Added-List-ItemExtIEs} }	OPTIONAL
}

BH-Routing-Information-Added-List-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BH-Routing-Information-Removed-List-Item ::= SEQUENCE {
	bAPRoutingID				BAPRoutingID,
	iE-Extensions				ProtocolExtensionContainer { { BH-Routing-Information-Removed-List-ItemExtIEs} }	OPTIONAL
}

BH-Routing-Information-Removed-List-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BPLMN-ID-Info-List ::= SEQUENCE (SIZE(1..maxnoofBPLMNsNR)) OF BPLMN-ID-Info-Item

BPLMN-ID-Info-Item ::= SEQUENCE {
	pLMN-Identity-List			AvailablePLMNList,
	extended-PLMN-Identity-List	ExtendedAvailablePLMN-List	OPTIONAL,
	fiveGS-TAC					FiveGS-TAC					OPTIONAL,
	nr-cell-ID					NRCellIdentity,
	ranac						RANAC						OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { BPLMN-ID-Info-ItemExtIEs} } OPTIONAL,
	...
}

BPLMN-ID-Info-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{	ID id-ConfiguredTACIndication		CRITICALITY ignore	EXTENSION ConfiguredTACIndication		PRESENCE optional }|
	{	ID id-NPNBroadcastInformation		CRITICALITY reject EXTENSION NPNBroadcastInformation		PRESENCE optional},
	...
}

ServedPLMNs-List ::= SEQUENCE (SIZE(1..maxnoofBPLMNs)) OF ServedPLMNs-Item

ServedPLMNs-Item ::= SEQUENCE {
	pLMN-Identity				PLMN-Identity,
	iE-Extensions				ProtocolExtensionContainer { { ServedPLMNs-ItemExtIEs} } OPTIONAL,
	...
}

ServedPLMNs-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
{ ID id-TAISliceSupportList	CRITICALITY ignore	EXTENSION SliceSupportList		PRESENCE optional	}|
{ ID id-NPNSupportInfo	CRITICALITY reject	EXTENSION NPNSupportInfo		PRESENCE optional	}|
{ ID id-ExtendedTAISliceSupportList	CRITICALITY reject	EXTENSION ExtendedSliceSupportList		PRESENCE optional	},
	...
}

BroadcastCAGList ::= SEQUENCE (SIZE(1..maxnoofCAGsupported)) OF CAGID

BroadcastNIDList ::= SEQUENCE (SIZE(1..maxnoofNIDsupported)) OF NID

BroadcastSNPN-ID-List ::= SEQUENCE (SIZE(1..maxnoofNIDsupported)) OF BroadcastSNPN-ID-List-Item

BroadcastSNPN-ID-List-Item ::= SEQUENCE {
	pLMN-Identity				PLMN-Identity,
	broadcastNIDList			BroadcastNIDList,
	iE-Extensions				ProtocolExtensionContainer { { BroadcastSNPN-ID-List-ItemExtIEs} } OPTIONAL,
	...
}

BroadcastSNPN-ID-List-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

BroadcastPNI-NPN-ID-List ::= SEQUENCE (SIZE(1..maxnoofCAGsupported)) OF BroadcastPNI-NPN-ID-List-Item

BroadcastPNI-NPN-ID-List-Item ::= SEQUENCE {
	pLMN-Identity				PLMN-Identity,
	broadcastCAGList			BroadcastCAGList,
	iE-Extensions				ProtocolExtensionContainer { { BroadcastPNI-NPN-ID-List-ItemExtIEs} } OPTIONAL,
	...
}

BroadcastPNI-NPN-ID-List-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}
BurstArrivalTime ::= OCTET STRING

-- C
CAGID ::= BIT STRING (SIZE(32))

Cancel-all-Warning-Messages-Indicator ::= ENUMERATED {true, ...}

Candidate-SpCell-Item ::= SEQUENCE {
	candidate-SpCell-ID			NRCGI	,
	iE-Extensions	ProtocolExtensionContainer { { Candidate-SpCell-ItemExtIEs } }	OPTIONAL,
	...
}

Candidate-SpCell-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CapacityValue::= SEQUENCE {
	capacityValue				INTEGER (0..100),
	sSBAreaCapacityValueList	SSBAreaCapacityValueList		OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { CapacityValue-ExtIEs} } OPTIONAL
}

CapacityValue-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Cause ::= CHOICE {
	radioNetwork		CauseRadioNetwork,
	transport			CauseTransport,
	protocol			CauseProtocol,
	misc				CauseMisc,
	choice-extension	ProtocolIE-SingleContainer { { Cause-ExtIEs} }
}

Cause-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

CauseMisc ::= ENUMERATED {
	control-processing-overload,
	not-enough-user-plane-processing-resources,
	hardware-failure,
	om-intervention,
	unspecified,
	...
}

CauseProtocol ::= ENUMERATED {
	transfer-syntax-error,
	abstract-syntax-error-reject,
	abstract-syntax-error-ignore-and-notify,
	message-not-compatible-with-receiver-state,
	semantic-error,
	abstract-syntax-error-falsely-constructed-message,
	unspecified,
	...
}

CauseRadioNetwork ::= ENUMERATED {
	unspecified,
	rl-failure-rlc,
	unknown-or-already-allocated-gnb-cu-ue-f1ap-id,
	unknown-or-already-allocated-gnb-du-ue-f1ap-id,
	unknown-or-inconsistent-pair-of-ue-f1ap-id,
	interaction-with-other-procedure,
	not-supported-qci-Value,
	action-desirable-for-radio-reasons,
	no-radio-resources-available,
	procedure-cancelled,
	normal-release,
	...,
	cell-not-available,
	rl-failure-others,
	ue-rejection,
	resources-not-available-for-the-slice,
	amf-initiated-abnormal-release,
	release-due-to-pre-emption,
	plmn-not-served-by-the-gNB-CU,
	multiple-drb-id-instances,
	unknown-drb-id,
	multiple-bh-rlc-ch-id-instances,
	unknown-bh-rlc-ch-id,
	cho-cpc-resources-tobechanged,
	nPN-not-supported, 
	nPN-access-denied,
	gNB-CU-Cell-Capacity-Exceeded,
	report-characteristics-empty,
	existing-measurement-ID,
	measurement-temporarily-not-available,
	measurement-not-supported-for-the-object,
	unknown-bh-address,
	unknown-bap-routing-id,
	insufficient-ue-capabilities

}

CauseTransport ::= ENUMERATED {
	unspecified,
	transport-resource-unavailable,
	...,
	unknown-TNL-address-for-IAB,
	unknown-UP-TNL-information-for-IAB
}

CellGroupConfig ::= OCTET STRING

CellCapacityClassValue ::= INTEGER (1..100,...)

Cell-Direction ::= ENUMERATED {dl-only, ul-only}

CellMeasurementResultList ::= SEQUENCE (SIZE(1.. maxCellingNBDU)) OF CellMeasurementResultItem

CellMeasurementResultItem ::= SEQUENCE {
	cellID							NRCGI,
	radioResourceStatus				RadioResourceStatus 			OPTIONAL, 
	compositeAvailableCapacityGroup	CompositeAvailableCapacityGroup	OPTIONAL,
	sliceAvailableCapacity			SliceAvailableCapacity 			OPTIONAL, 
	numberofActiveUEs 				NumberofActiveUEs			OPTIONAL, 
	iE-Extensions					ProtocolExtensionContainer { { CellMeasurementResultItem-ExtIEs} } OPTIONAL
}

CellMeasurementResultItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Cell-Portion-ID ::= INTEGER (0..4095,...)

Cells-Failed-to-be-Activated-List-Item ::= SEQUENCE {
	nRCGI				NRCGI,
	cause				Cause,
	iE-Extensions		ProtocolExtensionContainer { { Cells-Failed-to-be-Activated-List-ItemExtIEs } }	OPTIONAL,
	...
}

Cells-Failed-to-be-Activated-List-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Cells-Status-Item ::= SEQUENCE {
	nRCGI			NRCGI,
	service-status		Service-Status,
	iE-Extensions				ProtocolExtensionContainer { { Cells-Status-ItemExtIEs } }	OPTIONAL,
	...
}

Cells-Status-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Cells-To-Be-Broadcast-Item ::= SEQUENCE {
	nRCGI				NRCGI,
	iE-Extensions		ProtocolExtensionContainer { { Cells-To-Be-Broadcast-ItemExtIEs } }	OPTIONAL,
	...
}

Cells-To-Be-Broadcast-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Cells-Broadcast-Completed-Item ::= SEQUENCE {
	nRCGI				NRCGI,
	iE-Extensions		ProtocolExtensionContainer { { Cells-Broadcast-Completed-ItemExtIEs } }	OPTIONAL,
	...
}

Cells-Broadcast-Completed-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Broadcast-To-Be-Cancelled-Item ::= SEQUENCE {
	nRCGI				NRCGI,
	iE-Extensions		ProtocolExtensionContainer { { Broadcast-To-Be-Cancelled-ItemExtIEs } }	OPTIONAL,
	...
}

Broadcast-To-Be-Cancelled-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


Cells-Broadcast-Cancelled-Item ::= SEQUENCE {
	nRCGI				NRCGI,
	numberOfBroadcasts	NumberOfBroadcasts,
	iE-Extensions		ProtocolExtensionContainer { { Cells-Broadcast-Cancelled-ItemExtIEs } }	OPTIONAL,
	...
}

Cells-Broadcast-Cancelled-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Cells-to-be-Activated-List-Item ::= SEQUENCE {
	nRCGI		NRCGI,
	nRPCI		NRPCI		OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { Cells-to-be-Activated-List-ItemExtIEs} }	OPTIONAL,
	...
}

Cells-to-be-Activated-List-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-gNB-CUSystemInformation			CRITICALITY reject	EXTENSION GNB-CUSystemInformation			PRESENCE optional }|
	{ ID id-AvailablePLMNList				CRITICALITY ignore	EXTENSION AvailablePLMNList					PRESENCE optional }|
	{ ID id-ExtendedAvailablePLMN-List		CRITICALITY ignore	EXTENSION ExtendedAvailablePLMN-List		PRESENCE optional }|
	{ ID id-IAB-Info-IAB-donor-CU			CRITICALITY ignore	EXTENSION IAB-Info-IAB-donor-CU				PRESENCE optional}|
	{ ID id-AvailableSNPN-ID-List			CRITICALITY ignore	EXTENSION AvailableSNPN-ID-List				PRESENCE optional },
	...
}

Cells-to-be-Deactivated-List-Item ::= SEQUENCE {
	nRCGI			NRCGI	,
	iE-Extensions				ProtocolExtensionContainer { { Cells-to-be-Deactivated-List-ItemExtIEs } }	OPTIONAL,
	...
}

Cells-to-be-Deactivated-List-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Cells-to-be-Barred-Item::= SEQUENCE {
	nRCGI			NRCGI	,
	cellBarred		CellBarred,
	iE-Extensions				ProtocolExtensionContainer { { Cells-to-be-Barred-Item-ExtIEs } }	OPTIONAL
}

Cells-to-be-Barred-Item-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-IAB-Barred	CRITICALITY ignore	EXTENSION IAB-Barred		PRESENCE optional },

	...
}


CellBarred	::=	ENUMERATED {barred, not-barred, ...}

CellSize ::= ENUMERATED {verysmall, small, medium, large, ...}

CellToReportList ::= SEQUENCE (SIZE(1.. maxCellingNBDU)) OF CellToReportItem

CellToReportItem ::= SEQUENCE {
	cellID		NRCGI,
	sSBToReportList		SSBToReportList		 OPTIONAL,
	sliceToReportList	SliceToReportList	 OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { CellToReportItem-ExtIEs} } OPTIONAL
}

CellToReportItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CellType ::= SEQUENCE {
	cellSize		CellSize,
	iE-Extensions		ProtocolExtensionContainer { {CellType-ExtIEs} }	OPTIONAL,
	...
}

CellType-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CellULConfigured ::=  ENUMERATED {none, ul, sul, ul-and-sul, ...}

Child-Node-Cells-List ::= SEQUENCE (SIZE(1..maxnoofChildIABNodes)) OF Child-Node-Cells-List-Item

Child-Node-Cells-List-Item ::=	SEQUENCE{
	nRCGI 								NRCGI,
	iAB-DU-Cell-Resource-Configuration-Mode-Info 	IAB-DU-Cell-Resource-Configuration-Mode-Info	OPTIONAL,
	iAB-STC-Info						IAB-STC-Info	OPTIONAL,
	rACH-Config-Common					RACH-Config-Common	OPTIONAL,
	rACH-Config-Common-IAB				RACH-Config-Common-IAB	OPTIONAL,
	cSI-RS-Configuration				OCTET STRING	OPTIONAL,
	sR-Configuration					OCTET STRING	OPTIONAL,
	pDCCH-ConfigSIB1					OCTET STRING	OPTIONAL,
	sCS-Common							OCTET STRING	OPTIONAL,
	multiplexingInfo					MultiplexingInfo	OPTIONAL,
	iE-Extensions						ProtocolExtensionContainer {{Child-Node-Cells-List-Item-ExtIEs}}		OPTIONAL
}

Child-Node-Cells-List-Item-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Child-Nodes-List ::= SEQUENCE (SIZE(1..maxnoofChildIABNodes)) OF Child-Nodes-List-Item

Child-Nodes-List-Item ::= SEQUENCE{
	gNB-CU-UE-F1AP-ID	GNB-CU-UE-F1AP-ID,
	gNB-DU-UE-F1AP-ID	GNB-DU-UE-F1AP-ID,
	child-Node-Cells-List 	Child-Node-Cells-List	OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer {{Child-Nodes-List-Item-ExtIEs}}		OPTIONAL
}

Child-Nodes-List-Item-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CHOtrigger-InterDU ::= ENUMERATED {
	cho-initiation,
	cho-replace,
	...
}

CHOtrigger-IntraDU ::= ENUMERATED {
	cho-initiation,
	cho-replace,
	cho-cancel,
	...
}

CNUEPagingIdentity ::= CHOICE {
	fiveG-S-TMSI			BIT STRING (SIZE(48)),
	choice-extension			ProtocolIE-SingleContainer { { CNUEPagingIdentity-ExtIEs } }
}

CNUEPagingIdentity-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

CompositeAvailableCapacityGroup ::= SEQUENCE {
	compositeAvailableCapacityDownlink	CompositeAvailableCapacity,
	compositeAvailableCapacityUplink 	CompositeAvailableCapacity,
	iE-Extensions	ProtocolExtensionContainer { { CompositeAvailableCapacityGroup-ExtIEs} } OPTIONAL
}

CompositeAvailableCapacityGroup-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CompositeAvailableCapacity ::= SEQUENCE {
	cellCapacityClassValue 	CellCapacityClassValue		OPTIONAL,
	capacityValue			CapacityValue,
	iE-Extensions	ProtocolExtensionContainer { { CompositeAvailableCapacity-ExtIEs} } OPTIONAL
}

CompositeAvailableCapacity-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CHO-Probability ::= INTEGER (1..100)

ConditionalInterDUMobilityInformation ::= SEQUENCE {
	cho-trigger						CHOtrigger-InterDU,
	targetgNB-DUUEF1APID			GNB-DU-UE-F1AP-ID							OPTIONAL
		-- This IE shall be present if the cho-trigger IE is present and set to "cho-replace" --,
	iE-Extensions					ProtocolExtensionContainer { { ConditionalInterDUMobilityInformation-ExtIEs} }	OPTIONAL,
	...
}

ConditionalInterDUMobilityInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::={
	{ ID id-EstimatedArrivalProbability		CRITICALITY ignore		EXTENSION CHO-Probability		PRESENCE optional	},
	...
}

ConditionalIntraDUMobilityInformation ::= SEQUENCE {
	cho-trigger						CHOtrigger-IntraDU,
	targetCellsTocancel				TargetCellList								OPTIONAL,
	-- This IE may be present if the cho-trigger IE is present and set to "cho-cancel"
	iE-Extensions					ProtocolExtensionContainer { { ConditionalIntraDUMobilityInformation-ExtIEs} }	OPTIONAL,
	...
}

ConditionalIntraDUMobilityInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::={
	{ ID id-EstimatedArrivalProbability		CRITICALITY ignore		EXTENSION CHO-Probability		PRESENCE optional	},
	...
}

ConfiguredTACIndication ::= ENUMERATED {
	true,
	...
}


CoordinateID ::= INTEGER (0..511, ...)

CP-TransportLayerAddress ::= CHOICE {
	endpoint-IP-address				TransportLayerAddress,
	endpoint-IP-address-and-port	Endpoint-IP-address-and-port, 
	choice-extension				ProtocolIE-SingleContainer { { CP-TransportLayerAddress-ExtIEs } }
}

CP-TransportLayerAddress-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

CPTrafficType ::= INTEGER (1..3,...)

CriticalityDiagnostics ::= SEQUENCE {
	procedureCode					ProcedureCode														OPTIONAL,
	triggeringMessage				TriggeringMessage													OPTIONAL,
	procedureCriticality			Criticality															OPTIONAL,
	transactionID					TransactionID														OPTIONAL,
	iEsCriticalityDiagnostics		CriticalityDiagnostics-IE-List										OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer {{CriticalityDiagnostics-ExtIEs}}		OPTIONAL,
	...
}

CriticalityDiagnostics-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CriticalityDiagnostics-IE-List ::= SEQUENCE (SIZE (1.. maxnoofErrors)) OF CriticalityDiagnostics-IE-Item

CriticalityDiagnostics-IE-Item ::= SEQUENCE {
	iECriticality			Criticality,
	iE-ID					ProtocolIE-ID,
	typeOfError 			TypeOfError,
	iE-Extensions			ProtocolExtensionContainer {{CriticalityDiagnostics-IE-Item-ExtIEs}}	OPTIONAL,
	...
}

CriticalityDiagnostics-IE-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

C-RNTI ::= INTEGER (0..65535, ...)

CUDURadioInformationType ::= CHOICE {
	rIM								CUDURIMInformation,
	choice-extension				ProtocolIE-SingleContainer { { CUDURadioInformationType-ExtIEs} }
}

CUDURadioInformationType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

CUDURIMInformation ::= SEQUENCE {
	victimgNBSetID			GNBSetID, 
	rIMRSDetectionStatus	RIMRSDetectionStatus,
	iE-Extensions			ProtocolExtensionContainer { { CUDURIMInformation-ExtIEs} }	OPTIONAL
}

CUDURIMInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

CUtoDURRCInformation ::= SEQUENCE {
	cG-ConfigInfo						CG-ConfigInfo						OPTIONAL,
	uE-CapabilityRAT-ContainerList		UE-CapabilityRAT-ContainerList		OPTIONAL,
	measConfig							MeasConfig							OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { CUtoDURRCInformation-ExtIEs} } OPTIONAL,
	...
}

CUtoDURRCInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-HandoverPreparationInformation	CRITICALITY ignore	EXTENSION HandoverPreparationInformation		PRESENCE optional }|
	{ ID id-CellGroupConfig					CRITICALITY ignore	EXTENSION CellGroupConfig							PRESENCE optional }|
	{ ID id-MeasurementTimingConfiguration	CRITICALITY ignore	EXTENSION MeasurementTimingConfiguration		PRESENCE optional }|
	{ ID id-UEAssistanceInformation			CRITICALITY ignore	EXTENSION UEAssistanceInformation					PRESENCE optional }|
	{ ID id-CG-Config						CRITICALITY ignore	EXTENSION CG-Config									PRESENCE optional }|
	{ ID id-UEAssistanceInformationEUTRA	CRITICALITY ignore	EXTENSION UEAssistanceInformationEUTRA			PRESENCE optional }|
	{ ID id-LocationMeasurementInformation	CRITICALITY ignore	EXTENSION LocationMeasurementInformation			PRESENCE optional },
	...
}

-- D

DCBasedDuplicationConfigured::= ENUMERATED{true,..., false}

Dedicated-SIDelivery-NeededUE-Item ::= SEQUENCE {
	gNB-CU-UE-F1AP-ID						GNB-CU-UE-F1AP-ID,
	nRCGI									NRCGI,
	iE-Extensions							ProtocolExtensionContainer { { DedicatedSIDeliveryNeededUE-Item-ExtIEs} } OPTIONAL,
	...
}

DedicatedSIDeliveryNeededUE-Item-ExtIEs F1AP-PROTOCOL-EXTENSION::={
	...
}


DL-PRS ::= SEQUENCE {
	prsid 					INTEGER (0..255),
	dl-PRSResourceSetID		PRS-Resource-Set-ID,
	dl-PRSResourceID		PRS-Resource-ID	OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer { {DL-PRS-ExtIEs} }	OPTIONAL
}

DL-PRS-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DL-PRSMutingPattern ::= CHOICE {
	two					BIT STRING (SIZE(2)),
	four				BIT STRING (SIZE(4)),
	six					BIT STRING (SIZE(6)),
	eight				BIT STRING (SIZE(8)),
	sixteen				BIT STRING (SIZE(16)),
	thirty-two			BIT STRING (SIZE(32)),
	choice-extension							ProtocolIE-SingleContainer { { DL-PRSMutingPattern-ExtIEs } }
}

DL-PRSMutingPattern-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

DLPRSResourceCoordinates ::= SEQUENCE {
	listofDL-PRSResourceSetARP		SEQUENCE (SIZE(1.. maxnoofPRS-ResourceSets)) OF DLPRSResourceSetARP,
	iE-Extensions					ProtocolExtensionContainer { { DLPRSResourceCoordinates-ExtIEs } } OPTIONAL
}

DLPRSResourceCoordinates-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DLPRSResourceSetARP ::= SEQUENCE {
	dl-PRSResourceSetID				PRS-Resource-Set-ID,
	dL-PRSResourceSetARPLocation	DL-PRSResourceSetARPLocation,
	listofDL-PRSResourceARP			SEQUENCE (SIZE(1.. maxnoofPRS-ResourcesPerSet)) OF DLPRSResourceARP,
	iE-Extensions					ProtocolExtensionContainer { { DLPRSResourceSetARP-ExtIEs } } OPTIONAL
}

DLPRSResourceSetARP-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


DL-PRSResourceSetARPLocation ::= CHOICE {
	relativeGeodeticLocation			RelativeGeodeticLocation,
	relativeCartesianLocation			RelativeCartesianLocation,
	choice-Extension					ProtocolIE-SingleContainer { { DL-PRSResourceSetARPLocation-ExtIEs } }
}

DL-PRSResourceSetARPLocation-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}


DLPRSResourceARP ::= SEQUENCE {
	dl-PRSResourceID			PRS-Resource-ID,
	dL-PRSResourceARPLocation	DL-PRSResourceARPLocation,	
	iE-Extensions				ProtocolExtensionContainer { { DLPRSResourceARP-ExtIEs } } OPTIONAL
}

DLPRSResourceARP-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DL-PRSResourceARPLocation ::= CHOICE {
	relativeGeodeticLocation			RelativeGeodeticLocation,
	relativeCartesianLocation			RelativeCartesianLocation,
	choice-Extension					ProtocolIE-SingleContainer { { DL-PRSResourceARPLocation-ExtIEs } }
}

DL-PRSResourceARPLocation-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

DL-UP-TNL-Address-to-Update-List-Item	::= SEQUENCE {
	oldIPAdress						TransportLayerAddress,
	newIPAdress						TransportLayerAddress,
	iE-Extensions	ProtocolExtensionContainer { { DL-UP-TNL-Address-to-Update-List-ItemExtIEs } }	OPTIONAL,
	...
}

DL-UP-TNL-Address-to-Update-List-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DLUPTNLInformation-ToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofDLUPTNLInformation)) OF DLUPTNLInformation-ToBeSetup-Item

DLUPTNLInformation-ToBeSetup-Item ::= SEQUENCE {
	dLUPTNLInformation	UPTransportLayerInformation	,
	iE-Extensions	ProtocolExtensionContainer { { DLUPTNLInformation-ToBeSetup-ItemExtIEs } }	OPTIONAL,
	...
}

DLUPTNLInformation-ToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRB-Activity-Item ::= SEQUENCE {
	dRBID			DRBID,
	dRB-Activity	DRB-Activity		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { DRB-Activity-ItemExtIEs } }	OPTIONAL,
	...
}

DRB-Activity-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRB-Activity ::= ENUMERATED {active, not-active}

DRBID ::= INTEGER (1..32, ...)

DRBs-FailedToBeModified-Item	::= SEQUENCE {
	dRBID		DRBID		,
	cause		Cause		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-FailedToBeModified-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-FailedToBeModified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRBs-FailedToBeSetup-Item	::= SEQUENCE {
	dRBID	DRBID,
	cause	Cause	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-FailedToBeSetup-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-FailedToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


DRBs-FailedToBeSetupMod-Item	::= SEQUENCE {
	dRBID		DRBID	,
	cause		Cause			OPTIONAL ,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-FailedToBeSetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-FailedToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRB-Information	::=	SEQUENCE {
	dRB-QoS		QoSFlowLevelQoSParameters, 
	sNSSAI		SNSSAI, 
	notificationControl		NotificationControl		OPTIONAL,
	flows-Mapped-To-DRB-List	Flows-Mapped-To-DRB-List,
	iE-Extensions	ProtocolExtensionContainer { { DRB-Information-ItemExtIEs } }	OPTIONAL
}

DRB-Information-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRBs-Modified-Item	::= SEQUENCE {
	dRBID							DRBID,
	lCID								LCID		OPTIONAL,
	dLUPTNLInformation-ToBeSetup-List		DLUPTNLInformation-ToBeSetup-List,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-Modified-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-Modified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-RLC-Status							CRITICALITY ignore	EXTENSION RLC-Status									PRESENCE optional }|
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List		PRESENCE optional }|
	{ ID id-CurrentQoSParaSetIndex				CRITICALITY ignore	EXTENSION QoSParaSetIndex								PRESENCE optional },
	...
}

DRBs-ModifiedConf-Item	::= SEQUENCE {
	dRBID							DRBID,
	uLUPTNLInformation-ToBeSetup-List		ULUPTNLInformation-ToBeSetup-List	,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-ModifiedConf-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-ModifiedConf-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List			PRESENCE optional },
	...
}

DRB-Notify-Item ::= SEQUENCE {
	dRBID			DRBID,
	notification-Cause	Notification-Cause,
	iE-Extensions	ProtocolExtensionContainer { { DRB-Notify-ItemExtIEs } }	OPTIONAL,
	...
}

DRB-Notify-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-CurrentQoSParaSetIndex	CRITICALITY ignore	EXTENSION QoSParaSetNotifyIndex	PRESENCE optional	},
	...
}

DRBs-Required-ToBeModified-Item	::= SEQUENCE {
	dRBID							DRBID,
	dLUPTNLInformation-ToBeSetup-List		DLUPTNLInformation-ToBeSetup-List	,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-Required-ToBeModified-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-Required-ToBeModified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-RLC-Status			CRITICALITY ignore			EXTENSION RLC-Status				PRESENCE optional }|
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List			PRESENCE optional },
	...
}

DRBs-Required-ToBeReleased-Item	::= SEQUENCE {
	dRBID		DRBID,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-Required-ToBeReleased-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-Required-ToBeReleased-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRBs-Setup-Item ::= SEQUENCE {
	dRBID							DRBID,
	lCID								LCID		OPTIONAL,
	dLUPTNLInformation-ToBeSetup-List		DLUPTNLInformation-ToBeSetup-List	, 
	iE-Extensions	ProtocolExtensionContainer { { DRBs-Setup-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-Setup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List			PRESENCE optional }|
	{ ID id-CurrentQoSParaSetIndex				CRITICALITY ignore	EXTENSION QoSParaSetIndex									PRESENCE optional },
	...
}

DRBs-SetupMod-Item	::= SEQUENCE {
	dRBID							DRBID,
	lCID								LCID		OPTIONAL,
	dLUPTNLInformation-ToBeSetup-List		DLUPTNLInformation-ToBeSetup-List	,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-SetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-SetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List			PRESENCE optional }|
	{ ID id-CurrentQoSParaSetIndex				CRITICALITY ignore	EXTENSION QoSParaSetIndex									PRESENCE optional },
	...
}


DRBs-ToBeModified-Item	::= SEQUENCE {
	dRBID						DRBID,
	qoSInformation				QoSInformation	OPTIONAL,
	uLUPTNLInformation-ToBeSetup-List	ULUPTNLInformation-ToBeSetup-List	, 
	uLConfiguration				ULConfiguration	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-ToBeModified-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-ToBeModified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-DLPDCPSNLength						CRITICALITY ignore	EXTENSION PDCPSNLength										PRESENCE optional }|
	{ ID id-ULPDCPSNLength						CRITICALITY ignore	EXTENSION PDCPSNLength										PRESENCE optional }|
	{ID id-BearerTypeChange						CRITICALITY ignore	EXTENSION BearerTypeChange									PRESENCE optional}|
	{ ID id-RLCMode								CRITICALITY ignore	EXTENSION RLCMode											PRESENCE optional }|
	{ ID id-Duplication-Activation				CRITICALITY reject	EXTENSION DuplicationActivation							PRESENCE optional }|
	{ ID id-DC-Based-Duplication-Configured		CRITICALITY reject	EXTENSION DCBasedDuplicationConfigured					PRESENCE optional }|
	{ ID id-DC-Based-Duplication-Activation		CRITICALITY reject	EXTENSION DuplicationActivation							PRESENCE optional }|
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List			PRESENCE optional }|
	{ ID id-RLCDuplicationInformation			CRITICALITY ignore	EXTENSION RLCDuplicationInformation						PRESENCE optional}|
	{ ID id-TransmissionStopIndicator			CRITICALITY ignore	EXTENSION TransmissionStopIndicator						PRESENCE optional},
	...
}

DRBs-ToBeReleased-Item	::= SEQUENCE {
	dRBID	DRBID,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-ToBeReleased-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-ToBeReleased-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRBs-ToBeSetup-Item ::= SEQUENCE	{
	dRBID						DRBID,
	qoSInformation				QoSInformation,
	uLUPTNLInformation-ToBeSetup-List	ULUPTNLInformation-ToBeSetup-List	, 
	rLCMode						RLCMode, 
	uLConfiguration				ULConfiguration	OPTIONAL,
	duplicationActivation		DuplicationActivation	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-ToBeSetup-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-ToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-DC-Based-Duplication-Configured		CRITICALITY reject	EXTENSION DCBasedDuplicationConfigured				PRESENCE optional }|
	{ ID id-DC-Based-Duplication-Activation		CRITICALITY reject	EXTENSION DuplicationActivation						PRESENCE optional }|
	{ ID id-DLPDCPSNLength						CRITICALITY ignore	EXTENSION PDCPSNLength									PRESENCE mandatory }|
	{ ID id-ULPDCPSNLength						CRITICALITY ignore	EXTENSION PDCPSNLength									PRESENCE optional }|
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List		PRESENCE optional }|
	{ ID id-RLCDuplicationInformation			CRITICALITY ignore	EXTENSION RLCDuplicationInformation						PRESENCE optional},
	...
}


DRBs-ToBeSetupMod-Item	::= SEQUENCE {
	dRBID						DRBID,
	qoSInformation				QoSInformation,
	uLUPTNLInformation-ToBeSetup-List		ULUPTNLInformation-ToBeSetup-List,
	rLCMode						RLCMode, 
	uLConfiguration				ULConfiguration	OPTIONAL,
	duplicationActivation		DuplicationActivation	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { DRBs-ToBeSetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

DRBs-ToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-DC-Based-Duplication-Configured		CRITICALITY reject	EXTENSION DCBasedDuplicationConfigured				PRESENCE optional }|
	{ ID id-DC-Based-Duplication-Activation		CRITICALITY reject	EXTENSION DuplicationActivation						PRESENCE optional }|
	{ ID id-DLPDCPSNLength						CRITICALITY ignore	EXTENSION PDCPSNLength									PRESENCE optional }|
	{ ID id-ULPDCPSNLength						CRITICALITY ignore	EXTENSION PDCPSNLength									PRESENCE optional }|
	{ ID id-AdditionalPDCPDuplicationTNL-List	CRITICALITY ignore	EXTENSION AdditionalPDCPDuplicationTNL-List		PRESENCE optional }|
	{ ID id-RLCDuplicationInformation			CRITICALITY ignore	EXTENSION RLCDuplicationInformation					PRESENCE optional},
	...
}

DRXCycle	::= SEQUENCE {
	longDRXCycleLength	LongDRXCycleLength,
	shortDRXCycleLength		ShortDRXCycleLength	OPTIONAL,
	shortDRXCycleTimer	ShortDRXCycleTimer OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { { DRXCycle-ExtIEs} } OPTIONAL,
	...
}

DRXCycle-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DRX-Config ::= OCTET STRING

DRXConfigurationIndicator	::=	ENUMERATED{	release, ...}

DRX-LongCycleStartOffset ::= INTEGER (0..10239)

DSInformationList ::= SEQUENCE (SIZE(0..maxnoofDSInfo)) OF DSCP

DSCP ::= BIT STRING (SIZE (6))

DUtoCURRCContainer ::= OCTET STRING

DUCURadioInformationType ::= CHOICE {
	rIM								DUCURIMInformation,
	choice-extension				ProtocolIE-SingleContainer { { DUCURadioInformationType-ExtIEs} }
}

DUCURadioInformationType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

DUCURIMInformation ::= SEQUENCE {
	victimgNBSetID				GNBSetID, 
	rIMRSDetectionStatus		RIMRSDetectionStatus,
	aggressorCellList			AggressorCellList,
	iE-Extensions				ProtocolExtensionContainer { { DUCURIMInformation-ExtIEs} }		OPTIONAL 
}

DUCURIMInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

DUF-Slot-Config-Item 	::=	CHOICE {
	explicitFormat				ExplicitFormat,
	implicitFormat				ImplicitFormat,
	choice-extension				ProtocolIE-SingleContainer { { DUF-Slot-Config-Item-ExtIEs} }
}

DUF-Slot-Config-Item-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}
DUF-Slot-Config-List	::= SEQUENCE (SIZE(1..maxnoofDUFSlots)) OF DUF-Slot-Config-Item

DUFSlotformatIndex ::= INTEGER(0..254)

DUFTransmissionPeriodicity ::= ENUMERATED { ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms5, ms10, ...}

DU-RX-MT-RX ::= ENUMERATED {supported, not-supported}

DU-TX-MT-TX ::= ENUMERATED {supported, not-supported}

DU-RX-MT-TX ::= ENUMERATED {supported, not-supported}

DU-TX-MT-RX ::= ENUMERATED {supported, not-supported}

DUtoCURRCInformation ::= SEQUENCE {
	cellGroupConfig		CellGroupConfig,
	measGapConfig			MeasGapConfig	OPTIONAL,
	requestedP-MaxFR1				OCTET STRING				OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { DUtoCURRCInformation-ExtIEs} } OPTIONAL,
	...
}

DUtoCURRCInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-DRX-LongCycleStartOffset			CRITICALITY ignore	EXTENSION DRX-LongCycleStartOffset				PRESENCE optional }|
	{ ID id-SelectedBandCombinationIndex		CRITICALITY ignore	EXTENSION SelectedBandCombinationIndex			PRESENCE optional }|
	{ ID id-SelectedFeatureSetEntryIndex		CRITICALITY ignore	EXTENSION SelectedFeatureSetEntryIndex			PRESENCE optional }|
	{ ID id-Ph-InfoSCG							CRITICALITY ignore	EXTENSION Ph-InfoSCG								PRESENCE optional }|
	{ ID id-RequestedBandCombinationIndex		CRITICALITY ignore	EXTENSION RequestedBandCombinationIndex		PRESENCE optional }|
	{ ID id-RequestedFeatureSetEntryIndex		CRITICALITY ignore	EXTENSION RequestedFeatureSetEntryIndex		PRESENCE optional }|
	{ ID id-DRX-Config							CRITICALITY ignore	EXTENSION DRX-Config								PRESENCE optional }|
	{ ID id-PDCCH-BlindDetectionSCG				CRITICALITY ignore	EXTENSION PDCCH-BlindDetectionSCG				PRESENCE optional }|
	{ ID id-Requested-PDCCH-BlindDetectionSCG	CRITICALITY ignore	EXTENSION Requested-PDCCH-BlindDetectionSCG	PRESENCE optional }|
	{ ID id-Ph-InfoMCG							CRITICALITY ignore	EXTENSION Ph-InfoMCG								PRESENCE optional }|
	{ ID id-MeasGapSharingConfig				CRITICALITY ignore	EXTENSION MeasGapSharingConfig					PRESENCE optional }|
	{ ID id-SL-PHY-MAC-RLC-Config				CRITICALITY ignore	EXTENSION SL-PHY-MAC-RLC-Config					PRESENCE optional }|
	{ ID id-SL-ConfigDedicatedEUTRA-Info				CRITICALITY ignore	EXTENSION SL-ConfigDedicatedEUTRA-Info				PRESENCE optional }|
	{ ID id-RequestedP-MaxFR2					CRITICALITY ignore	EXTENSION RequestedP-MaxFR2							PRESENCE optional },
	...
}

DuplicationActivation ::= ENUMERATED{active,inactive,... }

DuplicationIndication ::= ENUMERATED {true, ... , false }

DuplicationState ::= ENUMERATED { 
	active,
	inactive,
	...
}

Dynamic5QIDescriptor	::= SEQUENCE {
	qoSPriorityLevel					INTEGER (1..127),
	packetDelayBudget					PacketDelayBudget,
	packetErrorRate						PacketErrorRate,
	fiveQI								INTEGER (0..255, ...)								OPTIONAL,
	delayCritical						ENUMERATED {delay-critical, non-delay-critical}		OPTIONAL,
	-- C-ifGBRflow: This IE shall be present if the GBR QoS Flow Information IE is present in the QoS Flow Level QoS Parameters IE.
	averagingWindow 					AveragingWindow										OPTIONAL,
	-- C-ifGBRflow: This IE shall be present if the GBR QoS Flow Information IE is present in the QoS Flow Level QoS Parameters IE.
	maxDataBurstVolume					MaxDataBurstVolume									OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { Dynamic5QIDescriptor-ExtIEs } } OPTIONAL
}

Dynamic5QIDescriptor-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-ExtendedPacketDelayBudget			CRITICALITY ignore	EXTENSION ExtendedPacketDelayBudget		PRESENCE optional		}|
	{ ID id-CNPacketDelayBudgetDownlink			CRITICALITY ignore	EXTENSION ExtendedPacketDelayBudget		PRESENCE optional		}|
	{ ID id-CNPacketDelayBudgetUplink			CRITICALITY ignore	EXTENSION ExtendedPacketDelayBudget		PRESENCE optional		},
	...
}

DynamicPQIDescriptor	::= SEQUENCE {
	resourceType						ENUMERATED {gbr, non-gbr, delay-critical-grb, ...}		OPTIONAL,
	qoSPriorityLevel					INTEGER (1..8, ...),
	packetDelayBudget					PacketDelayBudget,
	packetErrorRate						PacketErrorRate,
	averagingWindow 					AveragingWindow										OPTIONAL,
	-- C-ifGBRflow: This IE shall be present if the GBR QoS Flow Information IE is present in the QoS Flow Level QoS Parameters IE.
	maxDataBurstVolume					MaxDataBurstVolume									OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { DynamicPQIDescriptor-ExtIEs } } OPTIONAL
}

DynamicPQIDescriptor-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

-- E


E-CID-MeasurementQuantities ::= SEQUENCE (SIZE (1.. maxnoofMeasE-CID)) OF ProtocolIE-SingleContainer { {E-CID-MeasurementQuantities-ItemIEs} }

E-CID-MeasurementQuantities-ItemIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-E-CID-MeasurementQuantities-Item	CRITICALITY reject	TYPE E-CID-MeasurementQuantities-Item		PRESENCE mandatory}
}

E-CID-MeasurementQuantities-Item ::= SEQUENCE {
	e-CIDmeasurementQuantitiesValue				E-CID-MeasurementQuantitiesValue,
	iE-Extensions								ProtocolExtensionContainer { { E-CID-MeasurementQuantitiesValue-ExtIEs} } OPTIONAL
}

E-CID-MeasurementQuantitiesValue-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

E-CID-MeasurementQuantitiesValue ::= ENUMERATED {
	default,
	angleOfArrivalNR,
	... 
}

E-CID-MeasurementResult ::= SEQUENCE {
	geographicalCoordinates		GeographicalCoordinates 	OPTIONAL,
	measuredResults-List		E-CID-MeasuredResults-List 	OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { E-CID-MeasurementResult-ExtIEs} } OPTIONAL
}

E-CID-MeasurementResult-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

E-CID-MeasuredResults-List ::= SEQUENCE (SIZE(1..maxnoofMeasE-CID)) OF E-CID-MeasuredResults-Item

E-CID-MeasuredResults-Item ::= SEQUENCE {
	e-CID-MeasuredResults-Value 	E-CID-MeasuredResults-Value,
	iE-Extensions			ProtocolExtensionContainer {{ E-CID-MeasuredResults-Item-ExtIEs }}	 OPTIONAL
}

E-CID-MeasuredResults-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

E-CID-MeasuredResults-Value ::= CHOICE {
	valueAngleofArrivalNR	UL-AoA,
	choice-extension		ProtocolIE-SingleContainer { { E-CID-MeasuredResults-Value-ExtIEs} }
}

E-CID-MeasuredResults-Value-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

E-CID-ReportCharacteristics ::= ENUMERATED {
	onDemand,
	periodic,
	...
}

EgressBHRLCCHList ::= SEQUENCE (SIZE(1..maxnoofEgressLinks)) OF EgressBHRLCCHItem

EgressBHRLCCHItem ::= SEQUENCE {
	nextHopBAPAddress 		BAPAddress,
	bHRLCChannelID			BHRLCChannelID,
	iE-Extensions			ProtocolExtensionContainer {{EgressBHRLCCHItemExtIEs }}	 OPTIONAL
}

EgressBHRLCCHItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Endpoint-IP-address-and-port ::=SEQUENCE {
	endpointIPAddress TransportLayerAddress,
	iE-Extensions					ProtocolExtensionContainer { { Endpoint-IP-address-and-port-ExtIEs} } OPTIONAL
}

Endpoint-IP-address-and-port-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-portNumber	CRITICALITY reject	EXTENSION PortNumber		PRESENCE optional},
	...
}

ExtendedAvailablePLMN-List ::= SEQUENCE (SIZE(1..maxnoofExtendedBPLMNs)) OF ExtendedAvailablePLMN-Item

ExtendedAvailablePLMN-Item ::= SEQUENCE {
	pLMNIdentity			PLMN-Identity,
	iE-Extensions		ProtocolExtensionContainer { { ExtendedAvailablePLMN-Item-ExtIEs} } OPTIONAL
}

ExplicitFormat ::=	SEQUENCE {
	permutation			Permutation,
	noofDownlinkSymbols	NoofDownlinkSymbols		OPTIONAL,
	noofUplinkSymbols	NoofUplinkSymbols		OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { { ExplicitFormat-ExtIEs} } OPTIONAL
}

ExplicitFormat-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ExtendedAvailablePLMN-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ExtendedServedPLMNs-List ::= SEQUENCE (SIZE(1.. maxnoofExtendedBPLMNs)) OF ExtendedServedPLMNs-Item

ExtendedServedPLMNs-Item ::= SEQUENCE {
	pLMN-Identity				PLMN-Identity,
	tAISliceSupportList 		SliceSupportList	OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { ExtendedServedPLMNs-ItemExtIEs} } OPTIONAL,
	...
}

ExtendedServedPLMNs-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-NPNSupportInfo			CRITICALITY reject	EXTENSION NPNSupportInfo				PRESENCE optional	}|
{ ID id-ExtendedTAISliceSupportList	CRITICALITY reject	EXTENSION ExtendedSliceSupportList		PRESENCE optional	},
	...
}

ExtendedSliceSupportList ::= SEQUENCE (SIZE(1.. maxnoofExtSliceItems)) OF SliceSupportItem

EUTRACells-List  ::= SEQUENCE (SIZE (1.. maxCellineNB)) OF EUTRACells-List-item

EUTRACells-List-item ::= SEQUENCE {
	eUTRA-Cell-ID					EUTRA-Cell-ID,
	served-EUTRA-Cells-Information	Served-EUTRA-Cells-Information,
	iE-Extensions ProtocolExtensionContainer { { EUTRACells-List-itemExtIEs } }    OPTIONAL
}

EUTRACells-List-itemExtIEs    F1AP-PROTOCOL-EXTENSION ::= {
	...
}


EUTRA-Cell-ID ::= BIT STRING (SIZE(28))

EUTRA-Coex-FDD-Info ::= SEQUENCE {
	uL-EARFCN						ExtendedEARFCN					OPTIONAL,
	dL-EARFCN						ExtendedEARFCN,
	uL-Transmission-Bandwidth		EUTRA-Transmission-Bandwidth	OPTIONAL,
	dL-Transmission-Bandwidth		EUTRA-Transmission-Bandwidth,
	iE-Extensions					ProtocolExtensionContainer { {EUTRA-Coex-FDD-Info-ExtIEs} } OPTIONAL,
	...
}

EUTRA-Coex-FDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

EUTRA-Coex-Mode-Info ::= CHOICE {
	fDD		EUTRA-Coex-FDD-Info,
	tDD		EUTRA-Coex-TDD-Info,
	...
}

EUTRA-Coex-TDD-Info ::= SEQUENCE {
	eARFCN							ExtendedEARFCN,
	transmission-Bandwidth			EUTRA-Transmission-Bandwidth,
	subframeAssignment				EUTRA-SubframeAssignment,
	specialSubframe-Info			EUTRA-SpecialSubframe-Info,
	iE-Extensions					ProtocolExtensionContainer { {EUTRA-Coex-TDD-Info-ExtIEs} } OPTIONAL,
	...
}
EUTRA-Coex-TDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}
EUTRA-CyclicPrefixDL ::= ENUMERATED { 
	normal,
	extended,
	...
}

EUTRA-CyclicPrefixUL ::= ENUMERATED { 
	normal,
	extended,
	...
}

EUTRA-PRACH-Configuration ::= SEQUENCE {
	rootSequenceIndex						INTEGER (0..837),
	zeroCorrelationIndex					INTEGER (0..15),
	highSpeedFlag							BOOLEAN,
	prach-FreqOffset						INTEGER (0..94),
	prach-ConfigIndex						INTEGER (0..63)		OPTIONAL,
	-- C-ifTDD: This IE shall be present if the EUTRA-Mode-Info IE in the Resource Coordination E-UTRA Cell Information IE is set to the value "TDD"
	iE-Extensions							ProtocolExtensionContainer { {EUTRA-PRACH-Configuration-ExtIEs} }	OPTIONAL,
	...
}

EUTRA-PRACH-Configuration-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


EUTRA-SpecialSubframe-Info ::= SEQUENCE {
	specialSubframePatterns		EUTRA-SpecialSubframePatterns,
	cyclicPrefixDL				EUTRA-CyclicPrefixDL,
	cyclicPrefixUL				EUTRA-CyclicPrefixUL,
	iE-Extensions				ProtocolExtensionContainer { { EUTRA-SpecialSubframe-Info-ExtIEs} } OPTIONAL,
	...
}

EUTRA-SpecialSubframe-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

EUTRA-SpecialSubframePatterns ::= ENUMERATED { 
	ssp0,
	ssp1, 
	ssp2,
	ssp3,
	ssp4,
	ssp5,
	ssp6,
	ssp7,
	ssp8,
	ssp9,
	ssp10,
	...
}

EUTRA-SubframeAssignment ::= ENUMERATED { 
	sa0,
	sa1, 
	sa2,
	sa3,
	sa4,
	sa5,
	sa6,
	...
}

EUTRA-Transmission-Bandwidth ::= ENUMERATED {
	bw6,
	bw15,
	bw25,
	bw50,
	bw75,
	bw100,
	...
}

EUTRANQoS	::= SEQUENCE {
	qCI								QCI,
	allocationAndRetentionPriority	AllocationAndRetentionPriority,
	gbrQosInformation				GBR-QosInformation									OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { EUTRANQoS-ExtIEs} }	OPTIONAL,
	...
}

EUTRANQoS-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
{ ID id-ENBDLTNLAddress		CRITICALITY ignore	EXTENSION TransportLayerAddress	PRESENCE optional	},
	...
}

ExecuteDuplication ::= ENUMERATED{true,...}

ExtendedEARFCN ::= INTEGER (0..262143)

EUTRA-Mode-Info ::= CHOICE {
	eUTRAFDD		EUTRA-FDD-Info,
	eUTRATDD		EUTRA-TDD-Info,
	choice-extension	ProtocolIE-SingleContainer { { EUTRA-Mode-Info-ExtIEs} }
}

EUTRA-Mode-Info-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

EUTRA-NR-CellResourceCoordinationReq-Container	::= OCTET STRING

EUTRA-NR-CellResourceCoordinationReqAck-Container	::= OCTET STRING

EUTRA-FDD-Info ::= SEQUENCE {
	uL-offsetToPointA				OffsetToPointA,
	dL-offsetToPointA				OffsetToPointA,
	iE-Extensions					ProtocolExtensionContainer { {EUTRA-FDD-Info-ExtIEs} } OPTIONAL,
	...
}

EUTRA-FDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

EUTRA-TDD-Info ::= SEQUENCE {
	offsetToPointA					OffsetToPointA,
	iE-Extensions					ProtocolExtensionContainer { {EUTRA-TDD-Info-ExtIEs} } OPTIONAL,
	...
}

EUTRA-TDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

EventType ::= ENUMERATED {
	on-demand,
	periodic,
	stop,
	...
}

ExtendedPacketDelayBudget ::= INTEGER (1..65535, ...)

-- F

F1CPathNSA ::= ENUMERATED {lte, nr, both}

F1CTransferPath ::= SEQUENCE {
	f1CPathNSA						F1CPathNSA,
	iE-Extensions					ProtocolExtensionContainer { { F1CTransferPath-ExtIEs} } OPTIONAL,
	...
}

F1CTransferPath-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

FDD-Info ::= SEQUENCE {
	uL-NRFreqInfo						NRFreqInfo,
	dL-NRFreqInfo						NRFreqInfo,
	uL-Transmission-Bandwidth		Transmission-Bandwidth,
	dL-Transmission-Bandwidth		Transmission-Bandwidth,
	iE-Extensions					ProtocolExtensionContainer { {FDD-Info-ExtIEs} } OPTIONAL,
	...
}

FDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-ULCarrierList				CRITICALITY ignore	EXTENSION NRCarrierList				PRESENCE optional }|
	{ ID id-DLCarrierList				CRITICALITY ignore EXTENSION NRCarrierList				PRESENCE optional },
	...
}


Flows-Mapped-To-DRB-List	::=	SEQUENCE (SIZE(1.. maxnoofQoSFlows)) OF Flows-Mapped-To-DRB-Item

Flows-Mapped-To-DRB-Item 	::= SEQUENCE {
	qoSFlowIdentifier							QoSFlowIdentifier,
	qoSFlowLevelQoSParameters				QoSFlowLevelQoSParameters,
	iE-Extensions							ProtocolExtensionContainer { { Flows-Mapped-To-DRB-ItemExtIEs} } OPTIONAL
}

Flows-Mapped-To-DRB-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ID id-QoSFlowMappingIndication		CRITICALITY ignore	EXTENSION QoSFlowMappingIndication			PRESENCE optional}|
	{ID id-TSCTrafficCharacteristics	CRITICALITY ignore	EXTENSION TSCTrafficCharacteristics			PRESENCE optional},
	...
}

FR1-Bandwidth ::= ENUMERATED {bw5, bw10, bw20, bw40, bw50, bw80, bw100, ...}

FR2-Bandwidth ::= ENUMERATED {bw50, bw100, bw200, bw400, ...}

FreqBandNrItem ::= SEQUENCE {
	freqBandIndicatorNr 		INTEGER (1..1024,...), 
	supportedSULBandList		SEQUENCE (SIZE(0..maxnoofNrCellBands)) OF SupportedSULFreqBandItem,
	iE-Extensions				ProtocolExtensionContainer { {FreqBandNrItem-ExtIEs} } OPTIONAL,
	...
}

FreqBandNrItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

FreqDomainLength ::= CHOICE {
	l839							L839Info,
	l139							L139Info,
	choice-extension				ProtocolIE-SingleContainer { {FreqDomainLength-ExtIEs} }
}

FreqDomainLength-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

FrequencyShift7p5khz ::= ENUMERATED {false, true, ...}

FullConfiguration ::= ENUMERATED {full, ...}

FlowsMappedToSLDRB-List ::= SEQUENCE (SIZE(1.. maxnoofPC5QoSFlows)) OF FlowsMappedToSLDRB-Item 

FlowsMappedToSLDRB-Item ::= SEQUENCE {
	pc5QoSFlowIdentifier			PC5QoSFlowIdentifier,
	iE-Extensions					ProtocolExtensionContainer { {FlowsMappedToSLDRB-Item-ExtIEs} } OPTIONAL,
	...
}

FlowsMappedToSLDRB-Item-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

-- G


GBR-QosInformation ::= SEQUENCE {
	e-RAB-MaximumBitrateDL			BitRate,
	e-RAB-MaximumBitrateUL			BitRate,
	e-RAB-GuaranteedBitrateDL		BitRate,
	e-RAB-GuaranteedBitrateUL		BitRate,
	iE-Extensions					ProtocolExtensionContainer { { GBR-QosInformation-ExtIEs} } OPTIONAL,
	...
}

GBR-QosInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GBR-QoSFlowInformation::= SEQUENCE {
	maxFlowBitRateDownlink			BitRate,
	maxFlowBitRateUplink			BitRate, 
	guaranteedFlowBitRateDownlink	BitRate,
	guaranteedFlowBitRateUplink		BitRate, 
	maxPacketLossRateDownlink		MaxPacketLossRate		OPTIONAL,
	maxPacketLossRateUplink			MaxPacketLossRate		OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { GBR-QosFlowInformation-ExtIEs} } OPTIONAL,
	...
}

GBR-QosFlowInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ 	ID id-AlternativeQoSParaSetList	CRITICALITY ignore	EXTENSION AlternativeQoSParaSetList	PRESENCE optional	},
	...
}

CG-Config ::= OCTET STRING

GeographicalCoordinates ::= SEQUENCE {
	tRPPositionDefinitionType	TRPPositionDefinitionType,
	dLPRSResourceCoordinates	DLPRSResourceCoordinates	OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { GeographicalCoordinates-ExtIEs } } OPTIONAL
}

GeographicalCoordinates-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNBCUMeasurementID ::= INTEGER (0.. 4095, ...)

GNBDUMeasurementID ::= INTEGER (0.. 4095, ...)

GNB-CUSystemInformation::= SEQUENCE {
	sibtypetobeupdatedlist	SEQUENCE (SIZE(1.. maxnoofSIBTypes)) OF SibtypetobeupdatedListItem,
	iE-Extensions					ProtocolExtensionContainer { { GNB-CUSystemInformation-ExtIEs} } OPTIONAL,
	...
}

GNB-CUSystemInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ID id-systemInformationAreaID  CRITICALITY ignore	EXTENSION SystemInformationAreaID PRESENCE optional},
	...
}

GNB-CU-TNL-Association-Setup-Item::= SEQUENCE {
	tNLAssociationTransportLayerAddress		CP-TransportLayerAddress	,
	iE-Extensions					ProtocolExtensionContainer { { GNB-CU-TNL-Association-Setup-Item-ExtIEs} } OPTIONAL
}

GNB-CU-TNL-Association-Setup-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-CU-TNL-Association-Failed-To-Setup-Item ::= SEQUENCE {
	tNLAssociationTransportLayerAddress		CP-TransportLayerAddress	,
	cause									Cause,
	iE-Extensions					ProtocolExtensionContainer { { GNB-CU-TNL-Association-Failed-To-Setup-Item-ExtIEs} } OPTIONAL
}

GNB-CU-TNL-Association-Failed-To-Setup-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


GNB-CU-TNL-Association-To-Add-Item ::= SEQUENCE {
	tNLAssociationTransportLayerAddress		CP-TransportLayerAddress	,
	tNLAssociationUsage							TNLAssociationUsage,
	iE-Extensions					ProtocolExtensionContainer { { GNB-CU-TNL-Association-To-Add-Item-ExtIEs} } OPTIONAL
}

GNB-CU-TNL-Association-To-Add-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-CU-TNL-Association-To-Remove-Item::= SEQUENCE {
	tNLAssociationTransportLayerAddress		CP-TransportLayerAddress	,
	iE-Extensions							ProtocolExtensionContainer { { GNB-CU-TNL-Association-To-Remove-Item-ExtIEs} } OPTIONAL
}

GNB-CU-TNL-Association-To-Remove-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ID id-TNLAssociationTransportLayerAddressgNBDU	CRITICALITY reject	EXTENSION CP-TransportLayerAddress	PRESENCE optional},
	...
}


GNB-CU-TNL-Association-To-Update-Item::= SEQUENCE {
	tNLAssociationTransportLayerAddress		CP-TransportLayerAddress	,
	tNLAssociationUsage						TNLAssociationUsage OPTIONAL,
	iE-Extensions							ProtocolExtensionContainer { { GNB-CU-TNL-Association-To-Update-Item-ExtIEs} } OPTIONAL
}

GNB-CU-TNL-Association-To-Update-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-CU-UE-F1AP-ID		::= INTEGER (0..4294967295)

GNB-DU-Cell-Resource-Configuration	::= SEQUENCE { 
	subcarrierSpacing				SubcarrierSpacing,
	dUFTransmissionPeriodicity		DUFTransmissionPeriodicity	OPTIONAL,
	dUF-Slot-Config-List			DUF-Slot-Config-List	OPTIONAL,
	hSNATransmissionPeriodicity		HSNATransmissionPeriodicity,
	hNSASlotConfigList				HSNASlotConfigList	OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { GNB-DU-Cell-Resource-Configuration-ExtIEs } } OPTIONAL
}

GNB-DU-Cell-Resource-Configuration-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-DU-UE-F1AP-ID		::= INTEGER (0..4294967295)

GNB-DU-ID			::= INTEGER (0..68719476735)

GNB-CU-Name ::= PrintableString(SIZE(1..150,...))

GNB-DU-Name ::= PrintableString(SIZE(1..150,...)) 

Extended-GNB-CU-Name	 ::= SEQUENCE {
	gNB-CU-NameVisibleString		GNB-CU-NameVisibleString					OPTIONAL,
	gNB-CU-NameUTF8String			GNB-CU-NameUTF8String						OPTIONAL, 
	iE-Extensions					ProtocolExtensionContainer { { Extended-GNB-CU-Name-ExtIEs } } OPTIONAL,
	...
}

Extended-GNB-CU-Name-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-CU-NameVisibleString ::= VisibleString(SIZE(1..150,...))

GNB-CU-NameUTF8String ::= UTF8String(SIZE(1..150,...))

Extended-GNB-DU-Name	 ::= SEQUENCE {
	gNB-DU-NameVisibleString		GNB-DU-NameVisibleString					OPTIONAL,
	gNB-DU-NameUTF8String			GNB-DU-NameUTF8String						OPTIONAL, 
	iE-Extensions					ProtocolExtensionContainer { { Extended-GNB-DU-Name-ExtIEs } } OPTIONAL,
	...
}

Extended-GNB-DU-Name-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-DU-NameVisibleString ::= VisibleString(SIZE(1..150,...))

GNB-DU-NameUTF8String ::= UTF8String(SIZE(1..150,...))


GNB-DU-Served-Cells-Item ::= SEQUENCE {
	served-Cell-Information		Served-Cell-Information,
	gNB-DU-System-Information	GNB-DU-System-Information	OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { GNB-DU-Served-Cells-ItemExtIEs} }	OPTIONAL,
	...
}

GNB-DU-Served-Cells-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-DU-System-Information ::= SEQUENCE {
	mIB-message		MIB-message,
	sIB1-message		SIB1-message,
	iE-Extensions					ProtocolExtensionContainer { { GNB-DU-System-Information-ExtIEs } } OPTIONAL,
	...
}

GNB-DU-System-Information-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-SIB12-message		CRITICALITY ignore	EXTENSION SIB12-message		PRESENCE optional}|
	{ ID id-SIB13-message		CRITICALITY ignore	EXTENSION SIB13-message		PRESENCE optional}|
	{ ID id-SIB14-message		CRITICALITY ignore	EXTENSION SIB14-message		PRESENCE optional}|
	{ ID id-SIB10-message		CRITICALITY ignore	EXTENSION SIB10-message		PRESENCE optional},
	...
}

GNB-DUConfigurationQuery ::= ENUMERATED {true, ...}

GNBDUOverloadInformation ::= ENUMERATED {overloaded, not-overloaded}

GNB-DU-TNL-Association-To-Remove-Item::= SEQUENCE {
	tNLAssociationTransportLayerAddress		CP-TransportLayerAddress	,
	tNLAssociationTransportLayerAddressgNBCU		CP-TransportLayerAddress		OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { GNB-DU-TNL-Association-To-Remove-Item-ExtIEs} } OPTIONAL
}

GNB-DU-TNL-Association-To-Remove-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GNB-RxTxTimeDiff ::= SEQUENCE {
	rxTxTimeDiff			GNBRxTxTimeDiffMeas,
	additionalPath-List		AdditionalPath-List		OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer { { GNB-RxTxTimeDiff-ExtIEs} }  OPTIONAL
}

GNB-RxTxTimeDiff-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {

	...
}

GNBRxTxTimeDiffMeas ::= CHOICE {
	k0			INTEGER (0.. 1970049),
	k1			INTEGER (0.. 985025),
	k2			INTEGER (0.. 492513),
	k3			INTEGER (0.. 246257),
	k4			INTEGER (0.. 123129),
	k5			INTEGER (0.. 61565),
	choice-extension		ProtocolIE-SingleContainer { { GNBRxTxTimeDiffMeas-ExtIEs } } 
}

GNBRxTxTimeDiffMeas-ExtIEs		F1AP-PROTOCOL-IES ::= {
	...
}

GNBSetID ::= BIT STRING (SIZE(22))

GTP-TEID				::= OCTET STRING (SIZE (4))

GTPTLAs	::= SEQUENCE (SIZE(1.. maxnoofGTPTLAs)) OF	GTPTLA-Item


GTPTLA-Item	::= SEQUENCE {
	gTPTransportLayerAddress				TransportLayerAddress,
	iE-Extensions	ProtocolExtensionContainer { { GTPTLA-Item-ExtIEs } }			OPTIONAL
}

GTPTLA-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

GTPTunnel				::= SEQUENCE {
	transportLayerAddress		TransportLayerAddress,
	gTP-TEID		GTP-TEID,
	iE-Extensions					ProtocolExtensionContainer { { GTPTunnel-ExtIEs } } OPTIONAL,
	...
}

GTPTunnel-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

-- H

HandoverPreparationInformation ::= OCTET STRING

HardwareLoadIndicator ::= SEQUENCE {
	dLHardwareLoadIndicator			INTEGER (0..100, ...),
	uLHardwareLoadIndicator			INTEGER (0..100, ...),
	iE-Extensions					ProtocolExtensionContainer { { HardwareLoadIndicator-ExtIEs } } 	OPTIONAL,
	...
}

HardwareLoadIndicator-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

HSNASlotConfigList ::= SEQUENCE (SIZE(1..maxnoofHSNASlots)) OF HSNASlotConfigItem

HSNASlotConfigItem 	::=	SEQUENCE {
	hSNADownlink			HSNADownlink 		OPTIONAL,
	hSNAUplink				HSNAUplink 			OPTIONAL,
	hSNAFlexible			HSNAFlexible 		OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer { { HSNASlotConfigItem-ExtIEs } } OPTIONAL
}

HSNASlotConfigItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}
HSNADownlink ::= ENUMERATED { hard, soft, notavailable }

HSNAFlexible ::= ENUMERATED { hard, soft, notavailable }

HSNAUplink ::= ENUMERATED { hard, soft, notavailable }

HSNATransmissionPeriodicity ::=	ENUMERATED { ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms5, ms10, ms20, ms40, ms80, ms160, ...}

-- I

IAB-Barred	::=	ENUMERATED {barred, not-barred, ...}

IAB-Info-IAB-donor-CU ::=	SEQUENCE{
	iAB-STC-Info	IAB-STC-Info	OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { IAB-Info-IAB-donor-CU-ExtIEs } } OPTIONAL
}

IAB-Info-IAB-donor-CU-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-Info-IAB-DU ::=	SEQUENCE{
	multiplexingInfo		MultiplexingInfo	OPTIONAL,
	iAB-STC-Info		IAB-STC-Info	OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { IAB-Info-IAB-DU-ExtIEs } } OPTIONAL
}

IAB-Info-IAB-DU-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-MT-Cell-List ::= SEQUENCE (SIZE(1..maxnoofServingCells)) OF IAB-MT-Cell-List-Item

IAB-MT-Cell-List-Item ::= 	SEQUENCE {
	nRCellIdentity				NRCellIdentity,
	dU-RX-MT-RX					DU-RX-MT-RX,
	dU-TX-MT-TX					DU-TX-MT-TX,
	dU-RX-MT-TX					DU-RX-MT-TX,
	dU-TX-MT-RX					DU-TX-MT-RX,
	iE-Extensions				ProtocolExtensionContainer { { IAB-MT-Cell-List-Item-ExtIEs } } OPTIONAL
}

IAB-MT-Cell-List-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-STC-Info	::=	SEQUENCE{
	iAB-STC-Info-List	IAB-STC-Info-List,
	iE-Extensions		ProtocolExtensionContainer { { IAB-STC-Info-ExtIEs } } OPTIONAL
}

IAB-STC-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-STC-Info-List ::= 	SEQUENCE (SIZE(1..maxnoofIABSTCInfo)) OF IAB-STC-Info-Item

IAB-STC-Info-Item::=	SEQUENCE {
	sSB-freqInfo						SSB-freqInfo,
	sSB-subcarrierSpacing				SSB-subcarrierSpacing,
	sSB-transmissionPeriodicity			SSB-transmissionPeriodicity,
	sSB-transmissionTimingOffset		SSB-transmissionTimingOffset,
	sSB-transmissionBitmap				SSB-transmissionBitmap,
	iE-Extensions		ProtocolExtensionContainer { { IAB-STC-Info-Item-ExtIEs } } OPTIONAL
}

IAB-STC-Info-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-Allocated-TNL-Address-Item	::= SEQUENCE {
	iABTNLAddress				IABTNLAddress,
	iABTNLAddressUsage			IABTNLAddressUsage	 	OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { { IAB-Allocated-TNL-Address-Item-ExtIEs } } OPTIONAL
}

IAB-Allocated-TNL-Address-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-DU-Cell-Resource-Configuration-Mode-Info	::=	CHOICE {
	fDD		IAB-DU-Cell-Resource-Configuration-FDD-Info,
	tDD		IAB-DU-Cell-Resource-Configuration-TDD-Info,
	choice-extension			ProtocolIE-SingleContainer { { IAB-DU-Cell-Resource-Configuration-Mode-Info-ExtIEs} }
}

IAB-DU-Cell-Resource-Configuration-Mode-Info-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

IAB-DU-Cell-Resource-Configuration-FDD-Info ::= SEQUENCE {
	gNB-DU-Cell-Resource-Configuration-FDD-UL				GNB-DU-Cell-Resource-Configuration,
	gNB-DU-Cell-Resource-Configuration-FDD-DL				GNB-DU-Cell-Resource-Configuration,
	iE-Extensions					ProtocolExtensionContainer { {IAB-DU-Cell-Resource-Configuration-FDD-Info-ExtIEs} } OPTIONAL,
	...
}

IAB-DU-Cell-Resource-Configuration-FDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-DU-Cell-Resource-Configuration-TDD-Info ::= SEQUENCE {
	gNB-DU-Cell-Resourc-Configuration-TDD				GNB-DU-Cell-Resource-Configuration,
	iE-Extensions					ProtocolExtensionContainer { {IAB-DU-Cell-Resource-Configuration-TDD-Info-ExtIEs} } OPTIONAL,
	...
}

IAB-DU-Cell-Resource-Configuration-TDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IABIPv6RequestType	 ::= CHOICE {
	iPv6Address						IABTNLAddressesRequested,
	iPv6Prefix						IABTNLAddressesRequested, 
	choice-extension				ProtocolIE-SingleContainer { { IABIPv6RequestType-ExtIEs} }
}

IABIPv6RequestType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

IABTNLAddress ::= CHOICE {
	iPv4Address						BIT STRING (SIZE(32)), 
	iPv6Address						BIT STRING (SIZE(128)), 
	iPv6Prefix						BIT STRING (SIZE(64)), 
	choice-extension				ProtocolIE-SingleContainer { { IABTNLAddress-ExtIEs} }
}

IABTNLAddress-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

IABTNLAddressesRequested ::= SEQUENCE {
	tNLAddressesOrPrefixesRequestedAllTraffic	INTEGER (1..256) 	OPTIONAL,
	tNLAddressesOrPrefixesRequestedF1-C			INTEGER (1..256) 	OPTIONAL,
	tNLAddressesOrPrefixesRequestedF1-U			INTEGER (1..256) 	OPTIONAL,
	tNLAddressesOrPrefixesRequestedNoNF1		INTEGER (1..256) 	OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { { IABTNLAddressesRequested-ExtIEs } } OPTIONAL
}

IABTNLAddressesRequested-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IAB-TNL-Addresses-To-Remove-Item ::= SEQUENCE {
	iABTNLAddress			IABTNLAddress,
	iE-Extensions		ProtocolExtensionContainer { { IAB-TNL-Addresses-To-Remove-Item-ExtIEs} } OPTIONAL
}

IAB-TNL-Addresses-To-Remove-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IABTNLAddressUsage ::= ENUMERATED {
	f1-c,
	f1-u,
	non-f1,
	...
}


IABv4AddressesRequested ::= SEQUENCE {
	iABv4AddressesRequested			IABTNLAddressesRequested,
	iE-Extensions		ProtocolExtensionContainer { { IABv4AddressesRequested-ExtIEs} } OPTIONAL
}

IABv4AddressesRequested-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ImplicitFormat	::= SEQUENCE	{ 
	dUFSlotformatIndex 			DUFSlotformatIndex,
	iE-Extensions		ProtocolExtensionContainer { { ImplicitFormat-ExtIEs } } OPTIONAL
}

ImplicitFormat-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IgnorePRACHConfiguration::= ENUMERATED { true,...}

IgnoreResourceCoordinationContainer ::= ENUMERATED { yes,...}
InactivityMonitoringRequest ::= ENUMERATED { true,...}
InactivityMonitoringResponse ::= ENUMERATED { not-supported,...}
InterfacesToTrace ::= BIT STRING (SIZE(8))

IntendedTDD-DL-ULConfig ::= SEQUENCE {
	nRSCS						ENUMERATED { scs15, scs30, scs60, scs120,...},
	nRCP						ENUMERATED { normal, extended,...},
	nRDLULTxPeriodicity			ENUMERATED { ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms3, ms4, ms5, ms10, ms20, ms40, ms60, ms80, ms100, ms120, ms140, ms160, ...},
	slot-Configuration-List 	Slot-Configuration-List,
	iE-Extensions						ProtocolExtensionContainer { {IntendedTDD-DL-ULConfig-ExtIEs} } OPTIONAL
}

IntendedTDD-DL-ULConfig-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IPHeaderInformation ::= SEQUENCE {
	destinationIABTNLAddress			IABTNLAddress,
	dsInformationList					DSInformationList	OPTIONAL,
	iPv6FlowLabel						BIT STRING (SIZE (20))	OPTIONAL,
	iE-Extensions						ProtocolExtensionContainer { { IPHeaderInformation-ItemExtIEs} } OPTIONAL,
	...
}

IPHeaderInformation-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

IPtolayer2TrafficMappingInfo ::= SEQUENCE {
	iPtolayer2TrafficMappingInfoToAdd					IPtolayer2TrafficMappingInfoList		OPTIONAL,
	iPtolayer2TrafficMappingInfoToRemove				MappingInformationtoRemove				OPTIONAL,
	iE-Extensions										ProtocolExtensionContainer { { IPtolayer2TrafficMappingInfo-ItemExtIEs} } OPTIONAL,
	...
}

IPtolayer2TrafficMappingInfoList ::= SEQUENCE (SIZE(1..maxnoofMappingEntries)) OF IPtolayer2TrafficMappingInfo-Item

IPtolayer2TrafficMappingInfo-Item ::= SEQUENCE {
	mappingInformationIndex		MappingInformationIndex,		
	iPHeaderInformation			IPHeaderInformation,
	bHInfo	 					BHInfo,	iE-Extensions				ProtocolExtensionContainer { { IPtolayer2TrafficMappingInfo-ItemExtIEs} } OPTIONAL,
	...
}

IPtolayer2TrafficMappingInfo-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

-- J

-- K

-- L

L139Info ::= SEQUENCE {
	msg1SCS						ENUMERATED {scs15, scs30, scs60, scs120, ...},
	rootSequenceIndex			INTEGER (0..137)								OPTIONAL,
	iE-Extension				ProtocolExtensionContainer { {L139Info-ExtIEs} } 		OPTIONAL,
	...
}

L139Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

L839Info ::= SEQUENCE {
	rootSequenceIndex			INTEGER (0..837),
	restrictedSetConfig			ENUMERATED {unrestrictedSet, restrictedSetTypeA,
											restrictedSetTypeB, ...},
	iE-Extension		ProtocolExtensionContainer { {L839Info-ExtIEs} } 		OPTIONAL,
	...
}

L839Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

LCID ::= INTEGER (1..32, ...)


LCS-to-GCS-TranslationAoA::= SEQUENCE {
	alpha				INTEGER (0..3599),
	beta				INTEGER (0..3599),
	gamma				INTEGER (0..3599),
	iE-Extensions		ProtocolExtensionContainer { { LCS-to-GCS-TranslationAoA-ExtIEs} } OPTIONAL,
	...
}

LCS-to-GCS-TranslationAoA-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

LCStoGCSTranslationList ::= SEQUENCE (SIZE (1.. maxnooflcs-gcs-translation)) OF LCStoGCSTranslation

LCStoGCSTranslation ::= SEQUENCE {
	alpha			INTEGER (0..359),
	alpha-fine		INTEGER (0..9)		OPTIONAL,
	beta			INTEGER (0..359),
	beta-fine		INTEGER (0..9)		OPTIONAL,
	gamma			INTEGER (0..359),
	gamma-fine		INTEGER (0..9)		OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { {LCStoGCSTranslation-ExtIEs} } OPTIONAL
}

LCStoGCSTranslation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

LMF-MeasurementID ::= INTEGER (1.. 65536, ...)

LMF-UE-MeasurementID ::= INTEGER (1.. 256, ...)

LocationMeasurementInformation ::= OCTET STRING

LocationUncertainty ::= SEQUENCE {
	horizontalUncertainty		INTEGER (0..255),
	horizontalConfidence		INTEGER (0..100),
	verticalUncertainty			INTEGER (0..255),
	verticalConfidence			INTEGER (0..100),
	iE-Extensions				ProtocolExtensionContainer { { LocationUncertainty-ExtIEs} } OPTIONAL
}

LocationUncertainty-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

LongDRXCycleLength ::= 	ENUMERATED
{ms10, ms20, ms32, ms40, ms60, ms64, ms70, ms80, ms128, ms160, ms256, ms320, ms512, ms640, ms1024, ms1280, ms2048, ms2560, ms5120, ms10240, ...}

LowerLayerPresenceStatusChange ::= ENUMERATED {
	suspend-lower-layers,
	resume-lower-layers,
	...

}

LTEUESidelinkAggregateMaximumBitrate ::= SEQUENCE {
	uELTESidelinkAggregateMaximumBitrate		BitRate,
	iE-Extensions					ProtocolExtensionContainer { {LTEUESidelinkAggregateMaximumBitrate-ExtIEs} } OPTIONAL
}

LTEUESidelinkAggregateMaximumBitrate-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

LTEV2XServicesAuthorized ::= SEQUENCE {
	vehicleUE			VehicleUE														OPTIONAL,
	pedestrianUE 		PedestrianUE													OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { {LTEV2XServicesAuthorized-ExtIEs} }		OPTIONAL
}

LTEV2XServicesAuthorized-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

-- M

MappingInformationIndex	::= BIT STRING (SIZE (26))

MappingInformationtoRemove	::= SEQUENCE (SIZE(1..maxnoofMappingEntries)) OF MappingInformationIndex

MaskedIMEISV ::= 	BIT STRING (SIZE (64))

MaxDataBurstVolume  ::= INTEGER (0..4095, ..., 4096.. 2000000) 
MaxPacketLossRate ::= INTEGER (0..1000)

MIB-message ::= OCTET STRING

MeasConfig ::= OCTET STRING

MeasGapConfig ::= OCTET STRING

MeasGapSharingConfig ::= OCTET STRING

MeasurementBeamInfoRequest ::= ENUMERATED {true, ...}

MeasurementBeamInfo	 ::= SEQUENCE {
	pRS-Resource-ID				PRS-Resource-ID		OPTIONAL,
	pRS-Resource-Set-ID			PRS-Resource-Set-ID	OPTIONAL,
	sSB-Index					SSB-Index			OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { MeasurementBeamInfo-ExtIEs} } OPTIONAL
}

MeasurementBeamInfo-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


MeasurementTimingConfiguration ::= OCTET STRING

MessageIdentifier ::= BIT STRING (SIZE (16))

MultiplexingInfo 	::=	SEQUENCE{
	iAB-MT-Cell-List 	IAB-MT-Cell-List,
	iE-Extensions		ProtocolExtensionContainer { {MultiplexingInfo-ExtIEs} } OPTIONAL
}

MultiplexingInfo-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

M2Configuration ::= ENUMERATED {true, ...}


M5Configuration ::= SEQUENCE {
	m5period			M5period,
	m5-links-to-log		M5-Links-to-log,
	iE-Extensions		ProtocolExtensionContainer { { M5Configuration-ExtIEs} } OPTIONAL,
	...
}

M5Configuration-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

M5period ::= ENUMERATED { ms1024, ms2048, ms5120, ms10240, min1, ... } 

M5-Links-to-log	::= ENUMERATED {uplink, downlink, both-uplink-and-downlink, ...}


M6Configuration ::= SEQUENCE {
	m6report-Interval	M6report-Interval,
	m6-links-to-log		M6-Links-to-log,
	iE-Extensions		ProtocolExtensionContainer { { M6Configuration-ExtIEs} } OPTIONAL,
	...
}

M6Configuration-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

M6report-Interval ::= ENUMERATED { ms120, ms240, ms640, ms1024, ms2048, ms5120, ms10240, ms20480, ms40960, min1, min6, min12, min30, ... }



M6-Links-to-log	::= ENUMERATED {uplink, downlink, both-uplink-and-downlink, ...}


M7Configuration ::= SEQUENCE {
	m7period			M7period,
	m7-links-to-log		M7-Links-to-log,
	iE-Extensions		ProtocolExtensionContainer { { M7Configuration-ExtIEs} } OPTIONAL,
	...
}

M7Configuration-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

M7period	::= INTEGER(1..60, ...)

M7-Links-to-log	::= ENUMERATED {downlink, ...}

MDT-Activation ::= ENUMERATED { 
	immediate-MDT-only,
	immediate-MDT-and-Trace,
	...
}

MDTConfiguration ::= SEQUENCE {
	mdt-Activation				MDT-Activation,
	measurementsToActivate		MeasurementsToActivate,
	m2Configuration				M2Configuration		OPTIONAL,
	--  C-ifM2: This IE shall be present if the Measurements to Activate IE has the second bit set to "1".
	m5Configuration				M5Configuration		OPTIONAL,
	--  C-ifM5: This IE shall be present if the Measurements to Activate IE has the fifth bit set to "1".
	m6Configuration				M6Configuration		OPTIONAL,
	--  C-ifM6: This IE shall be present if the Measurements to Activate IE has the seventh bit set to "1".
	m7Configuration				M7Configuration		OPTIONAL,
	--  C-ifM7: This IE shall be present if the Measurements to Activate IE has the eighth bit set to "1".
	iE-Extensions				ProtocolExtensionContainer { { MDTConfiguration-ExtIEs} } OPTIONAL,
	...
}
MDTConfiguration-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


MDTPLMNList ::= SEQUENCE (SIZE(1..maxnoofMDTPLMNs)) OF PLMN-Identity


MeasuredResultsValue ::= CHOICE {
	uL-AngleOfArrival	UL-AoA,
	uL-SRS-RSRP			UL-SRS-RSRP,
	uL-RTOA				UL-RTOA-Measurement,
	gNB-RxTxTimeDiff	GNB-RxTxTimeDiff,
	choice-extension	ProtocolIE-SingleContainer { { MeasuredResultsValue-ExtIEs } }
}

MeasuredResultsValue-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

MeasurementsToActivate ::= BIT STRING (SIZE (8))

-- N

NeedforGap::= ENUMERATED {true, ...}

Neighbour-Cell-Information-Item ::= SEQUENCE {
	nRCGI				NRCGI, 
	intendedTDD-DL-ULConfig		IntendedTDD-DL-ULConfig OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { Neighbour-Cell-Information-ItemExtIEs } }	OPTIONAL
}

Neighbour-Cell-Information-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NGRANAllocationAndRetentionPriority ::= SEQUENCE {
	priorityLevel				PriorityLevel,
	pre-emptionCapability		Pre-emptionCapability,
	pre-emptionVulnerability	Pre-emptionVulnerability,
	iE-Extensions				ProtocolExtensionContainer { {NGRANAllocationAndRetentionPriority-ExtIEs} } OPTIONAL
}

NGRANAllocationAndRetentionPriority-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


NGRANHighAccuracyAccessPointPosition ::= SEQUENCE {
	latitude					INTEGER (-2147483648.. 2147483647),
	longitude					INTEGER (-2147483648.. 2147483647),
	altitude					INTEGER (-64000..1280000),
	uncertaintySemi-major		INTEGER (0..255),
	uncertaintySemi-minor		INTEGER (0..255),
	orientationOfMajorAxis		INTEGER (0..179),
	horizontalConfidence		INTEGER (0..100),
	uncertaintyAltitude			INTEGER (0..255),
	verticalConfidence			INTEGER (0..100), 

	iE-Extensions				ProtocolExtensionContainer { { NGRANHighAccuracyAccessPointPosition-ExtIEs} } OPTIONAL
}

NGRANHighAccuracyAccessPointPosition-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NID ::= BIT STRING (SIZE(44))

NR-CGI-List-For-Restart-Item ::= SEQUENCE {
	nRCGI				NRCGI,
	iE-Extensions		ProtocolExtensionContainer { { NR-CGI-List-For-Restart-ItemExtIEs } }	OPTIONAL,
	...
}

NR-CGI-List-For-Restart-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NR-PRSBeamInformation ::= SEQUENCE {
	nR-PRSBeamInformationList		NR-PRSBeamInformationList,
	lCStoGCSTranslationList 		LCStoGCSTranslationList		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { NR-PRSBeamInformation-ExtIEs } } OPTIONAL
}

NR-PRSBeamInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NR-PRSBeamInformationList ::= SEQUENCE (SIZE(1.. maxnoofPRS-ResourceSets)) OF NR-PRSBeamInformationItem

NR-PRSBeamInformationItem ::= SEQUENCE {
	pRSResourceSetID	PRS-Resource-Set-ID,
	pRSAngleList		PRSAngleList,
	iE-Extensions	ProtocolExtensionContainer { { NR-PRSBeamInformationItem-ExtIEs } } OPTIONAL
}

NR-PRSBeamInformationItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NonDynamic5QIDescriptor	::= SEQUENCE {
	fiveQI						INTEGER (0..255, ...),
	qoSPriorityLevel			INTEGER (1..127)				OPTIONAL,
	averagingWindow 			AveragingWindow					OPTIONAL,
	maxDataBurstVolume			MaxDataBurstVolume				OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { NonDynamic5QIDescriptor-ExtIEs } } OPTIONAL
}

NonDynamic5QIDescriptor-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-CNPacketDelayBudgetDownlink	CRITICALITY ignore	EXTENSION ExtendedPacketDelayBudget		PRESENCE optional	}|
	{ ID id-CNPacketDelayBudgetUplink	CRITICALITY ignore	EXTENSION ExtendedPacketDelayBudget		PRESENCE optional	},
	...
}

NonDynamicPQIDescriptor	::= SEQUENCE {
	fiveQI						INTEGER (0..255, ...),
	qoSPriorityLevel			INTEGER (1..8, ...)				OPTIONAL,
	averagingWindow 			AveragingWindow					OPTIONAL,
	maxDataBurstVolume			MaxDataBurstVolume				OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { NonDynamicPQIDescriptor-ExtIEs } } OPTIONAL
}

NonDynamicPQIDescriptor-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NonUPTrafficType ::=	ENUMERATED {ue-associated, non-ue-associated, non-f1, bap-control-pdu,...}

NoofDownlinkSymbols	::= INTEGER (0..14)

NoofUplinkSymbols	::= INTEGER (0..14)

Notification-Cause ::= ENUMERATED {fulfilled, not-fulfilled, ...}

NotificationControl ::= ENUMERATED {active, not-active, ...}

NotificationInformation ::= SEQUENCE {
	message-Identifier	MessageIdentifier,
	serialNumber		SerialNumber,
	iE-Extensions	ProtocolExtensionContainer { { NotificationInformationExtIEs} } OPTIONAL,
	...
}

NotificationInformationExtIEs		F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NPNBroadcastInformation ::= CHOICE {
	sNPN-Broadcast-Information					NPN-Broadcast-Information-SNPN,
	pNI-NPN-Broadcast-Information				NPN-Broadcast-Information-PNI-NPN,
	choice-extension					ProtocolIE-SingleContainer { {NPNBroadcastInformation-ExtIEs} }
}

NPNBroadcastInformation-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

NPN-Broadcast-Information-SNPN ::= SEQUENCE {
	broadcastSNPNID-List		BroadcastSNPN-ID-List,
	iE-Extension				ProtocolExtensionContainer { {NPN-Broadcast-Information-SNPN-ExtIEs} }	OPTIONAL,
	...
}

NPN-Broadcast-Information-SNPN-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}
NPN-Broadcast-Information-PNI-NPN ::= SEQUENCE {
	broadcastPNI-NPN-ID-Information		BroadcastPNI-NPN-ID-List,
	iE-Extension							ProtocolExtensionContainer { {NPN-Broadcast-Information-PNI-NPN-ExtIEs} }	OPTIONAL,
	...
}

NPN-Broadcast-Information-PNI-NPN-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


NPNSupportInfo ::= CHOICE {
	sNPN-Information		NID,
	choice-extension		ProtocolIE-SingleContainer { { NPNSupportInfo-ExtIEs } } 
}

NPNSupportInfo-ExtIEs		F1AP-PROTOCOL-IES ::= {
	...
}

NRCarrierList ::= SEQUENCE (SIZE(1..maxnoofNRSCSs)) OF NRCarrierItem

NRCarrierItem ::= SEQUENCE {
	carrierSCS						NRSCS,
	offsetToCarrier					INTEGER (0..2199, ...),
	carrierBandwidth				INTEGER (0..maxnoofPhysicalResourceBlocks, ...),
	iE-Extension			ProtocolExtensionContainer { {NRCarrierItem-ExtIEs} } 				OPTIONAL,
	...
}

NRCarrierItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NRFreqInfo ::=  SEQUENCE {
	nRARFCN			INTEGER (0..maxNRARFCN),
	sul-Information	SUL-Information		OPTIONAL,
	freqBandListNr	SEQUENCE (SIZE(1..maxnoofNrCellBands)) OF FreqBandNrItem,
	iE-Extensions	ProtocolExtensionContainer { { NRFreqInfoExtIEs} } OPTIONAL,
	...
}

NRFreqInfoExtIEs		F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-FrequencyShift7p5khz	CRITICALITY ignore	EXTENSION FrequencyShift7p5khz	PRESENCE optional },
	...
}

NRCGI ::= SEQUENCE {
	pLMN-Identity			PLMN-Identity,
	nRCellIdentity			NRCellIdentity,
	iE-Extensions			ProtocolExtensionContainer { {NRCGI-ExtIEs} } OPTIONAL,
	...
}

NRCGI-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NR-Mode-Info ::= CHOICE {
	fDD		FDD-Info,
	tDD		TDD-Info,
	choice-extension			ProtocolIE-SingleContainer { { NR-Mode-Info-ExtIEs} }
}

NR-Mode-Info-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}



NRPRACHConfig ::= SEQUENCE {
	ulPRACHConfigList			NRPRACHConfigList									OPTIONAL,
	sulPRACHConfigList			NRPRACHConfigList									OPTIONAL,
	iE-Extension				ProtocolExtensionContainer { {NRPRACHConfig-ExtIEs} } 	OPTIONAL,
	...
}

NRPRACHConfig-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NRCellIdentity ::= BIT STRING (SIZE(36))

NRNRB ::= ENUMERATED { nrb11, nrb18, nrb24, nrb25, nrb31, nrb32, nrb38, nrb51, nrb52, nrb65, nrb66, nrb78, nrb79, nrb93, nrb106, nrb107, nrb121, nrb132, nrb133, nrb135, nrb160, nrb162, nrb189, nrb216, nrb217, nrb245, nrb264, nrb270, nrb273, ...}

NRPCI ::= INTEGER(0..1007)


NRPRACHConfigList ::= SEQUENCE (SIZE(0..maxnoofPRACHconfigs)) OF NRPRACHConfigItem

NRPRACHConfigItem ::= SEQUENCE {
	nRSCS					NRSCS,
	prachFreqStartfromCarrier	INTEGER (0..maxnoofPhysicalResourceBlocks-1, ...),
	msg1FDM						ENUMERATED {one, two, four, eight, ...},
	parchConfigIndex			INTEGER (0..255, ..., 256..262),
	ssb-perRACH-Occasion		ENUMERATED {oneEighth, oneFourth, oneHalf, one, 
											two, four, eight, sixteen, ...},
	freqDomainLength			FreqDomainLength, 
	zeroCorrelZoneConfig		INTEGER (0..15),
	iE-Extension		ProtocolExtensionContainer { { NRPRACHConfigItem-ExtIEs} } 		OPTIONAL,
	...
}

NRPRACHConfigItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NRSCS ::= ENUMERATED { scs15, scs30, scs60, scs120, ...}

NRUERLFReportContainer ::= OCTET STRING

NumberofActiveUEs ::= INTEGER(0..16777215, ...)

NumberOfBroadcasts ::= INTEGER (0..65535)

NumberofBroadcastRequest ::= INTEGER (0..65535)

NumDLULSymbols ::= SEQUENCE {
	numDLSymbols	INTEGER (0..13, ...),
	numULSymbols	INTEGER (0..13, ...),
	iE-Extensions			ProtocolExtensionContainer { { NumDLULSymbols-ExtIEs} } OPTIONAL
}

NumDLULSymbols-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NRV2XServicesAuthorized ::= SEQUENCE {
	vehicleUE			VehicleUE														OPTIONAL,
	pedestrianUE 		PedestrianUE													OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { {NRV2XServicesAuthorized-ExtIEs} }	OPTIONAL
}

NRV2XServicesAuthorized-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NRUESidelinkAggregateMaximumBitrate ::= SEQUENCE {
	uENRSidelinkAggregateMaximumBitrate		BitRate,
	iE-Extensions					ProtocolExtensionContainer { {NRUESidelinkAggregateMaximumBitrate-ExtIEs} } OPTIONAL
}

NRUESidelinkAggregateMaximumBitrate-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

NZP-CSI-RS-ResourceID::= INTEGER  (0..191)


-- O

OffsetToPointA	::= INTEGER (0..2199,...)


-- P

PacketDelayBudget ::= INTEGER (0..1023, ...) 

PacketErrorRate ::= SEQUENCE {
	pER-Scalar			PER-Scalar,
	pER-Exponent		PER-Exponent,
	iE-Extensions		ProtocolExtensionContainer { {PacketErrorRate-ExtIEs} }	OPTIONAL,
	...
}

PacketErrorRate-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PER-Scalar ::= INTEGER (0..9, ...)
PER-Exponent ::= INTEGER (0..9, ...)

PagingCell-Item ::= SEQUENCE {
	nRCGI		NRCGI	,
	iE-Extensions	ProtocolExtensionContainer { { PagingCell-ItemExtIEs } }	OPTIONAL
}

PagingCell-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PagingDRX ::= ENUMERATED {
	v32,
	v64,
	v128,
	v256,
	...
}

PagingIdentity ::=	CHOICE {
	rANUEPagingIdentity	RANUEPagingIdentity,
	cNUEPagingIdentity	CNUEPagingIdentity, 
	choice-extension			ProtocolIE-SingleContainer { { PagingIdentity-ExtIEs } }
}

PagingIdentity-ExtIEs F1AP-PROTOCOL-IES::= {
	...
}

PagingOrigin ::= ENUMERATED { non-3gpp,	...}

PagingPriority ::= ENUMERATED { priolevel1, priolevel2, priolevel3, priolevel4, priolevel5, priolevel6, priolevel7, priolevel8,...} 


RelativePathDelay ::= CHOICE {
	k0					INTEGER (0..16351),
	k1					INTEGER (0..8176),
	k2					INTEGER (0..4088),
	k3					INTEGER (0..2044),
	k4					INTEGER (0..1022),
	k5					INTEGER (0..511),	 
	choice-extension			ProtocolIE-SingleContainer { { RelativePathDelay-ExtIEs } }
}

RelativePathDelay-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

PathlossReferenceInfo ::= SEQUENCE {
	pathlossReferenceSignal			PathlossReferenceSignal,
	iE-Extensions					ProtocolExtensionContainer { {PathlossReferenceInfo-ExtIEs} }	OPTIONAL
}

PathlossReferenceInfo-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PathlossReferenceSignal ::= CHOICE { 
	sSB										SSB,
	dL-PRS									DL-PRS,
	choice-extension						ProtocolIE-SingleContainer {{PathlossReferenceSignal-ExtIEs }}
}

PathlossReferenceSignal-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

PC5QoSFlowIdentifier ::= INTEGER (1..2048) 

PC5-QoS-Characteristics ::= CHOICE {
	non-Dynamic-PQI				NonDynamicPQIDescriptor,
	dynamic-PQI					DynamicPQIDescriptor, 
	choice-extension			ProtocolIE-SingleContainer { { PC5-QoS-Characteristics-ExtIEs } }
}

PC5-QoS-Characteristics-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}


PC5QoSParameters	::= SEQUENCE {
    pC5-QoS-Characteristics				PC5-QoS-Characteristics,
	pC5-QoS-Flow-Bit-Rates				PC5FlowBitRates				OPTIONAL,
	iE-Extensions						ProtocolExtensionContainer { { PC5QoSParameters-ExtIEs } }	OPTIONAL,
	...
}

PC5QoSParameters-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PC5FlowBitRates ::= SEQUENCE {
	guaranteedFlowBitRate		BitRate,
	maximumFlowBitRate			BitRate,
	iE-Extensions				ProtocolExtensionContainer { { PC5FlowBitRates-ExtIEs } }	OPTIONAL,
	...
}

PC5FlowBitRates-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PDCCH-BlindDetectionSCG ::= OCTET STRING

PDCP-SN ::= INTEGER (0..4095)

PDCPSNLength	::= ENUMERATED { twelve-bits,eighteen-bits,...}

PDUSessionID ::= INTEGER (0..255)

ReportingPeriodicityValue ::= INTEGER (0..512, ...)

Periodicity ::= INTEGER (0..640000, ...) 

PeriodicitySRS ::= ENUMERATED { ms0p125, ms0p25, ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms4, ms5, ms8, ms10, ms16, ms20, ms32, ms40, ms64, ms80, ms160, ms320, ms640, ms1280, ms2560, ms5120, ms10240, ...}

PeriodicityList ::= SEQUENCE (SIZE(1.. maxnoSRS-ResourcePerSet)) OF PeriodicityList-Item

PeriodicityList-Item ::= SEQUENCE {
	periodicitySRS				PeriodicitySRS,
	iE-Extensions				ProtocolExtensionContainer { { PeriodicityList-ItemExtIEs} } OPTIONAL
}

PeriodicityList-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


Permutation ::= ENUMERATED {dfu, ufd, ...}

Ph-InfoMCG  ::= OCTET STRING

Ph-InfoSCG  ::= OCTET STRING

PLMN-Identity ::= OCTET STRING (SIZE(3))

PortNumber ::= BIT STRING (SIZE (16))


PosAssistance-Information ::= OCTET STRING

PosAssistanceInformationFailureList ::= OCTET STRING

PosBroadcast ::= ENUMERATED {
	start,
	stop,
	...
}

PositioningBroadcastCells ::= SEQUENCE (SIZE (1..maxnoBcastCell)) OF NRCGI

MeasurementPeriodicity ::= ENUMERATED
{ms120, ms240, ms480, ms640, ms1024, ms2048, ms5120, ms10240, min1, min6, min12, min30, ..., ms20480, ms40960, extended }


MeasurementPeriodicityExtended ::= ENUMERATED {ms160, ms320, ms1280, ms2560, ms61440, ms81920,	ms368640, ms737280, ms1843200,	...}

PosMeasurementQuantities ::= SEQUENCE (SIZE(1.. maxnoofPosMeas)) OF PosMeasurementQuantities-Item

PosMeasurementQuantities-Item ::= SEQUENCE {
	posMeasurementType					PosMeasurementType,
	timingReportingGranularityFactor	INTEGER (0..5) OPTIONAL,
	iE-Extensions						ProtocolExtensionContainer { { PosMeasurementQuantities-ItemExtIEs} } OPTIONAL
}

PosMeasurementQuantities-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PosMeasurementResult ::= SEQUENCE (SIZE (1.. maxnoofPosMeas)) OF PosMeasurementResultItem 

PosMeasurementResultItem ::= SEQUENCE {
	measuredResultsValue				MeasuredResultsValue,
	timeStamp							TimeStamp,
	measurementQuality					TRPMeasurementQuality	OPTIONAL,
	measurementBeamInfo					MeasurementBeamInfo		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { PosMeasurementResultItemExtIEs } }	OPTIONAL
}

PosMeasurementResultItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PosMeasurementResultList ::= SEQUENCE (SIZE(1.. maxNoOfMeasTRPs)) OF PosMeasurementResultList-Item

PosMeasurementResultList-Item ::= SEQUENCE {
	posMeasurementResult			PosMeasurementResult,
	tRPID							TRPID,
	iE-Extensions					ProtocolExtensionContainer { { PosMeasurementResultList-ItemExtIEs} } OPTIONAL
}

PosMeasurementResultList-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-NRCGI	CRITICALITY ignore EXTENSION NRCGI		PRESENCE optional },
	...
}

PosMeasurementType ::= ENUMERATED {
	gnb-rx-tx,
	ul-srs-rsrp,
	ul-aoa,
	ul-rtoa, 
	...
}

PosReportCharacteristics ::= ENUMERATED {
	ondemand, 
	periodic, 
	...
}

PosResourceSetType  ::= CHOICE {
	periodic			PosResourceSetTypePR,
	semi-persistent		PosResourceSetTypeSP,
	aperiodic			PosResourceSetTypeAP,
	choice-extension	ProtocolIE-SingleContainer {{ PosResourceSetType-ExtIEs }}
}

PosResourceSetType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

PosResourceSetTypePR ::= SEQUENCE {
	posperiodicSet		ENUMERATED{true, ...},
	iE-Extensions		ProtocolExtensionContainer { { PosResourceSetTypePR-ExtIEs} }	OPTIONAL
}

PosResourceSetTypePR-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PosResourceSetTypeSP ::= SEQUENCE {
	possemi-persistentSet		ENUMERATED{true, ...},
	iE-Extensions		ProtocolExtensionContainer { { PosResourceSetTypeSP-ExtIEs} }	OPTIONAL
}

PosResourceSetTypeSP-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PosResourceSetTypeAP ::= SEQUENCE {
	sRSResourceTrigger-List 	INTEGER(1..3),
	iE-Extensions		ProtocolExtensionContainer { { PosResourceSetTypeAP-ExtIEs} }	OPTIONAL
}

PosResourceSetTypeAP-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PosSRSResourceID-List ::= SEQUENCE (SIZE (1..maxnoSRS-PosResourcePerSet)) OF SRSPosResourceID

PosSRSResource-Item ::= SEQUENCE {
	srs-PosResourceId				SRSPosResourceID,
	transmissionCombPos				TransmissionCombPos,
	startPosition                   INTEGER (0..13),
	nrofSymbols                     ENUMERATED {n1, n2, n4, n8, n12},
	freqDomainShift                 INTEGER (0..268),
	c-SRS	                        INTEGER (0..63),
	groupOrSequenceHopping          ENUMERATED { neither, groupHopping, sequenceHopping },
	resourceTypePos					ResourceTypePos,
	sequenceId                      INTEGER (0.. 65535),
	spatialRelationPos				SpatialRelationPos 	OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { PosSRSResource-Item-ExtIEs} }	OPTIONAL
}

PosSRSResource-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PosSRSResource-List ::= SEQUENCE (SIZE (1..maxnoSRS-PosResources)) OF PosSRSResource-Item

PosSRSResourceSet-Item ::= SEQUENCE {
	possrsResourceSetID				INTEGER(0..15),
	possRSResourceID-List			PosSRSResourceID-List,
	posresourceSetType				PosResourceSetType,
	iE-Extensions		ProtocolExtensionContainer { { PosSRSResourceSet-Item-ExtIEs} }	OPTIONAL
}

PosSRSResourceSet-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PosSRSResourceSet-List ::= SEQUENCE (SIZE (1..maxnoSRS-PosResourceSets)) OF PosSRSResourceSet-Item

PrimaryPathIndication ::= ENUMERATED { 
	true,
	false,
	...
}

Pre-emptionCapability ::= ENUMERATED {
	shall-not-trigger-pre-emption,
	may-trigger-pre-emption
}

Pre-emptionVulnerability ::= ENUMERATED {
	not-pre-emptable,
	pre-emptable
}

PriorityLevel	::= INTEGER { spare (0), highest (1), lowest (14), no-priority (15) } (0..15)

ProtectedEUTRAResourceIndication		::= OCTET STRING

Protected-EUTRA-Resources-Item ::= SEQUENCE {
	spectrumSharingGroupID					SpectrumSharingGroupID, 
	eUTRACells-List		EUTRACells-List,
	iE-Extensions	ProtocolExtensionContainer { { Protected-EUTRA-Resources-ItemExtIEs } }	OPTIONAL
}

Protected-EUTRA-Resources-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRSConfiguration ::= SEQUENCE {
	pRSResourceSet-List			PRSResourceSet-List,
	iE-Extensions	ProtocolExtensionContainer { { PRSConfiguration-ExtIEs } }	OPTIONAL
}

PRSConfiguration-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRSInformationPos  ::= SEQUENCE {
	pRS-IDPos					INTEGER(0..255),	
	pRS-Resource-Set-IDPos		INTEGER(0..7),
	pRS-Resource-IDPos			INTEGER(0..63)	OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { PRSInformationPos-ExtIEs} } OPTIONAL
}

PRSInformationPos-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Potential-SpCell-Item ::= SEQUENCE {
	potential-SpCell-ID			NRCGI	,
	iE-Extensions	ProtocolExtensionContainer { { Potential-SpCell-ItemExtIEs } }	OPTIONAL,
	...
}

Potential-SpCell-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


PRSAngleList ::= SEQUENCE (SIZE(1.. maxnoofPRS-ResourcesPerSet)) OF PRSAngleItem

PRSAngleItem ::= SEQUENCE {
	nR-PRS-Azimuth			INTEGER (0..359),
	nR-PRS-Azimuth-fine		INTEGER (0..9),
	nR-PRS-Elevation		INTEGER (0..180),
	nR-PRS-Elevation-fine	INTEGER (0..9),
	iE-Extensions		ProtocolExtensionContainer { { PRSAngleItem-ItemExtIEs } }	OPTIONAL
}

PRSAngleItem-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-PRS-Resource-ID		CRITICALITY ignore EXTENSION PRS-Resource-ID		PRESENCE optional },
	...
}

PRSMuting::= SEQUENCE {
	pRSMutingOption1			PRSMutingOption1		OPTIONAL,
	pRSMutingOption2			PRSMutingOption2		OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { PRSMuting-ExtIEs} } OPTIONAL
}

PRSMuting-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRSMutingOption1 ::= SEQUENCE {
	mutingPattern					DL-PRSMutingPattern,
	mutingBitRepetitionFactor		ENUMERATED{rf1,rf2,rf4,rf8,...},
	iE-Extensions					ProtocolExtensionContainer { { PRSMutingOption1-ExtIEs} } OPTIONAL
}

PRSMutingOption1-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRSMutingOption2 ::= SEQUENCE {
	mutingPattern					DL-PRSMutingPattern,
	iE-Extensions					ProtocolExtensionContainer { { PRSMutingOption2-ExtIEs} } OPTIONAL
}

PRSMutingOption2-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRS-Resource-ID ::= INTEGER (0..63)

PRSResource-List::= SEQUENCE (SIZE (1..maxnoofPRSresources)) OF PRSResource-Item

PRSResource-Item  ::= SEQUENCE {
	pRSResourceID			PRS-Resource-ID,
	sequenceID				INTEGER(0..4095),
	rEOffset				INTEGER(0..11,...),
	resourceSlotOffset		INTEGER(0..511),
	resourceSymbolOffset	INTEGER(0..12),
	qCLInfo					PRSResource-QCLInfo		OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer { { PRSResource-Item-ExtIEs} } OPTIONAL
}

PRSResource-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRSResource-QCLInfo  ::= CHOICE {
	qCLSourceSSB		PRSResource-QCLSourceSSB,
	qCLSourcePRS		PRSResource-QCLSourcePRS,		
	choice-extension		ProtocolIE-SingleContainer { { PRSResource-QCLInfo-ExtIEs } }
}
PRSResource-QCLInfo-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

PRSResource-QCLSourceSSB ::= SEQUENCE {
	pCI-NR				INTEGER(0..1007),
	sSB-Index 			SSB-Index OPTIONAL,		
	iE-Extensions		ProtocolExtensionContainer { { PRSResource-QCLSourceSSB-ExtIEs} } OPTIONAL,
	...
}

PRSResource-QCLSourceSSB-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRSResource-QCLSourcePRS ::= SEQUENCE {
	qCLSourcePRSResourceSetID		PRS-Resource-Set-ID,
	qCLSourcePRSResourceID 			PRS-Resource-ID OPTIONAL,		
	iE-Extensions					ProtocolExtensionContainer { { PRSResource-QCLSourcePRS-ExtIEs} } OPTIONAL
}

PRSResource-QCLSourcePRS-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PRS-Resource-Set-ID ::= INTEGER(0..7)

PRSResourceSet-List ::= SEQUENCE (SIZE (1.. maxnoofPRSresourceSets)) OF PRSResourceSet-Item
PRSResourceSet-Item ::= SEQUENCE {
	pRSResourceSetID				PRS-Resource-Set-ID,
	subcarrierSpacing				ENUMERATED{kHz15, kHz30, kHz60, kHz120, ...},
	pRSbandwidth					INTEGER(1..63),
	startPRB						INTEGER(0..2176),
	pointA							INTEGER (0..3279165),
	combSize						ENUMERATED{n2, n4, n6, n12, ...},
	cPType							ENUMERATED{normal, extended, ...},
	resourceSetPeriodicity			ENUMERATED{n4,n5,n8,n10,n16,n20,n32,n40,n64,n80,n160,n320,n640,n1280,n2560,n5120,n10240,n20480,n40960, n81920,...},
	resourceSetSlotOffset			INTEGER(0..81919,...),
	resourceRepetitionFactor		ENUMERATED{rf1,rf2,rf4,rf6,rf8,rf16,rf32,...},
	resourceTimeGap					ENUMERATED{tg1,tg2,tg4,tg8,tg16,tg32,...},
	resourceNumberofSymbols			ENUMERATED{n2,n4,n6,n12,...},
	pRSMuting						PRSMuting 		OPTIONAL,
	pRSResourceTransmitPower		INTEGER(-60..50),
	pRSResource-List				PRSResource-List,	
	iE-Extensions					ProtocolExtensionContainer { { PRSResourceSet-Item-ExtIEs} } OPTIONAL
}

PRSResourceSet-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PWS-Failed-NR-CGI-Item ::= SEQUENCE {
	nRCGI				NRCGI,
	numberOfBroadcasts	NumberOfBroadcasts,
	iE-Extensions		ProtocolExtensionContainer { { PWS-Failed-NR-CGI-ItemExtIEs } }	OPTIONAL,
	...
}

PWS-Failed-NR-CGI-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

PWSSystemInformation ::= SEQUENCE {
	sIBtype 				SIBType-PWS,
	sIBmessage			OCTET STRING, 
	iE-Extensions		ProtocolExtensionContainer { { PWSSystemInformationExtIEs } }	OPTIONAL,
	...
}

PWSSystemInformationExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ID id-NotificationInformation		CRITICALITY ignore	EXTENSION NotificationInformation		PRESENCE optional}|
	{ ID id-AdditionalSIBMessageList	CRITICALITY reject	EXTENSION AdditionalSIBMessageList		PRESENCE optional},
	...
}

PrivacyIndicator ::= ENUMERATED {immediate-MDT,	logged-MDT,	...}

-- Q

QCI ::= INTEGER (0..255)

QoS-Characteristics ::= CHOICE {
	non-Dynamic-5QI				NonDynamic5QIDescriptor,
	dynamic-5QI					Dynamic5QIDescriptor, 
	choice-extension			ProtocolIE-SingleContainer { { QoS-Characteristics-ExtIEs } }
}

QoS-Characteristics-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

QoSFlowIdentifier ::= INTEGER (0..63) 

QoSFlowLevelQoSParameters	::= SEQUENCE {
	qoS-Characteristics					QoS-Characteristics,
	nGRANallocationRetentionPriority		NGRANAllocationAndRetentionPriority,
	gBR-QoS-Flow-Information				GBR-QoSFlowInformation				OPTIONAL,
	reflective-QoS-Attribute				ENUMERATED {subject-to, ...}				OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { QoSFlowLevelQoSParameters-ExtIEs } }	OPTIONAL
}

QoSFlowLevelQoSParameters-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-PDUSessionID								CRITICALITY ignore	EXTENSION PDUSessionID			PRESENCE optional}|
	{ ID id-ULPDUSessionAggregateMaximumBitRate			CRITICALITY ignore	EXTENSION BitRate					PRESENCE optional}|
	{ ID id-QosMonitoringRequest						CRITICALITY ignore	EXTENSION QosMonitoringRequest	PRESENCE optional}|
	{ ID id-PDCPTerminatingNodeDLTNLAddrInfo		CRITICALITY ignore	EXTENSION TransportLayerAddress	PRESENCE optional	},
	...
}

QoSFlowMappingIndication ::= ENUMERATED {ul,dl,...}

QoSInformation	::=	CHOICE {
	eUTRANQoS					EUTRANQoS,
	choice-extension			ProtocolIE-SingleContainer { { QoSInformation-ExtIEs} }
}

QoSInformation-ExtIEs F1AP-PROTOCOL-IES ::= {
	{	ID id-DRB-Information		CRITICALITY ignore TYPE DRB-Information		PRESENCE mandatory},
	...
}

QosMonitoringRequest ::= ENUMERATED {ul, dl, both, ..., stop}

QoSParaSetIndex ::= INTEGER (1..8, ...) 

QoSParaSetNotifyIndex ::= INTEGER (0..8, ...)

-- R

RACH-Config-Common	::= OCTET STRING

RACH-Config-Common-IAB	::= OCTET STRING

RACHReportContainer::= OCTET STRING

RACHReportInformationList	::= SEQUENCE (SIZE(1.. maxnoofRACHReports)) OF RACHReportInformationItem

RACHReportInformationItem	::= SEQUENCE {
	rACHReportContainer				RACHReportContainer,
	uEAssitantIdentifier			GNB-DU-UE-F1AP-ID		OPTIONAL, 
	iE-Extensions			ProtocolExtensionContainer { { RACHReportInformationItem-ExtIEs} }	OPTIONAL,
	...
}

RACHReportInformationItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}



RadioResourceStatus ::= SEQUENCE {
	sSBAreaRadioResourceStatusList		SSBAreaRadioResourceStatusList,
	iE-Extensions	ProtocolExtensionContainer { { RadioResourceStatus-ExtIEs} } OPTIONAL
}

RadioResourceStatus-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RANAC ::= INTEGER (0..255) 

RAN-MeasurementID ::= INTEGER (1.. 65536, ...)

RAN-UE-MeasurementID ::= INTEGER (1.. 256, ...)

RANUEID ::= OCTET STRING (SIZE (8))

RANUEPagingIdentity ::= SEQUENCE	{
	iRNTI						BIT STRING (SIZE(40)),
	iE-Extensions				ProtocolExtensionContainer { { RANUEPagingIdentity-ExtIEs } }	OPTIONAL}

RANUEPagingIdentity-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RAT-FrequencyPriorityInformation::= CHOICE {
	eNDC		SubscriberProfileIDforRFP,
	nGRAN		RAT-FrequencySelectionPriority,
	choice-extension			ProtocolIE-SingleContainer { { RAT-FrequencyPriorityInformation-ExtIEs} }
}

RAT-FrequencyPriorityInformation-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

RAT-FrequencySelectionPriority::= INTEGER (1.. 256, ...)

Reestablishment-Indication	::=	ENUMERATED  {
	reestablished,
	...
}

ReferencePoint ::= CHOICE {
	coordinateID					CoordinateID,
	referencePointCoordinate		AccessPointPosition,
	referencePointCoordinateHA		NGRANHighAccuracyAccessPointPosition,
	choice-Extension				ProtocolIE-SingleContainer { { ReferencePoint-ExtIEs} }
}

ReferencePoint-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

ReferenceSFN ::= INTEGER (0..1023)

ReferenceSignal ::= CHOICE { 
	nZP-CSI-RS								NZP-CSI-RS-ResourceID,
	sSB										SSB,
	sRS										SRSResourceID,
	positioningSRS							SRSPosResourceID,
	dL-PRS									DL-PRS,
	choice-extension						ProtocolIE-SingleContainer {{ReferenceSignal-ExtIEs }}
}

ReferenceSignal-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

RelativeCartesianLocation ::= SEQUENCE {
	xYZunit						ENUMERATED {mm, cm, dm, ...},
	xvalue						INTEGER (-65536..65535),
	yvalue						INTEGER (-65536..65535),
	zvalue						INTEGER (-32768..32767),
	locationUncertainty			LocationUncertainty,
	iE-Extensions				ProtocolExtensionContainer { { RelativeCartesianLocation-ExtIEs} } OPTIONAL
}

RelativeCartesianLocation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RelativeGeodeticLocation ::= SEQUENCE { 
	milli-Arc-SecondUnits		ENUMERATED {zerodot03, zerodot3, three, ...},	
	heightUnits					ENUMERATED {mm, cm, m, ...}, 
	deltaLatitude				INTEGER (-1024.. 1023),
	deltaLongitude				INTEGER (-1024.. 1023),
	deltaHeight					INTEGER (-1024.. 1023),
	locationUncertainty			LocationUncertainty,
	iE-extensions				ProtocolExtensionContainer {{RelativeGeodeticLocation-ExtIEs }} OPTIONAL
}

RelativeGeodeticLocation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ReferenceTime ::= OCTET STRING

RegistrationRequest ::= ENUMERATED{start, stop, add, ...}

ReportCharacteristics ::= BIT STRING (SIZE(32))

ReportingPeriodicity ::= ENUMERATED{ms500, ms1000, ms2000, ms5000, ms10000, ...}

RequestedBandCombinationIndex ::= OCTET STRING

RequestedFeatureSetEntryIndex ::= OCTET STRING

RequestedP-MaxFR2 ::= OCTET STRING

Requested-PDCCH-BlindDetectionSCG ::= OCTET STRING


RequestedSRSTransmissionCharacteristics ::= SEQUENCE {
	numberOfTransmissions		INTEGER (0..500, ...)		OPTIONAL,
-- The IE shall be present if the Resource Type IE is set to “periodic” --
	resourceType				ENUMERATED  {periodic, semi-persistent, aperiodic,...},
	bandwidthSRS				BandwidthSRS,
	sRSResourceSetList 			SRSResourceSetList				OPTIONAL,
	sSBInformation				SSBInformation				OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer { { RequestedSRSTransmissionCharacteristics-ExtIEs} } OPTIONAL
}

RequestedSRSTransmissionCharacteristics-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-SrsFrequency		CRITICALITY ignore EXTENSION SrsFrequency		PRESENCE optional },
	...
}

RequestType	::= ENUMERATED {offer, execution, ...}

ResourceCoordinationEUTRACellInfo ::= SEQUENCE {
	eUTRA-Mode-Info 						EUTRA-Coex-Mode-Info,
	eUTRA-PRACH-Configuration 				EUTRA-PRACH-Configuration,
	iE-Extensions	ProtocolExtensionContainer { { ResourceCoordinationEUTRACellInfo-ExtIEs } }	OPTIONAL,
	...
}

ResourceCoordinationEUTRACellInfo-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ID id-IgnorePRACHConfiguration		CRITICALITY reject EXTENSION IgnorePRACHConfiguration		PRESENCE optional },
	...
}

ResourceCoordinationTransferInformation ::= SEQUENCE {
	meNB-Cell-ID								EUTRA-Cell-ID,
	resourceCoordinationEUTRACellInfo		ResourceCoordinationEUTRACellInfo	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { ResourceCoordinationTransferInformation-ExtIEs } }	OPTIONAL,
	...
}

ResourceCoordinationTransferInformation-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceCoordinationTransferContainer ::= OCTET STRING

ResourceSetType  ::= CHOICE {
	periodic			ResourceSetTypePeriodic,
	semi-persistent		ResourceSetTypeSemi-persistent,
	aperiodic			ResourceSetTypeAperiodic,
	choice-extension				ProtocolIE-SingleContainer {{ ResourceSetType-ExtIEs }}
}

ResourceSetType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

ResourceSetTypePeriodic ::= SEQUENCE {
	periodicSet			ENUMERATED{true, ...},
	iE-Extensions		ProtocolExtensionContainer { { ResourceSetTypePeriodic-ExtIEs} }	OPTIONAL
}

ResourceSetTypePeriodic-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceSetTypeSemi-persistent ::= SEQUENCE {
	semi-persistentSet	ENUMERATED{true, ...},
	iE-Extensions		ProtocolExtensionContainer { { ResourceSetTypeSemi-persistent-ExtIEs} }	OPTIONAL
}

ResourceSetTypeSemi-persistent-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceSetTypeAperiodic ::= SEQUENCE {
	sRSResourceTrigger-List 	INTEGER(1..3),
	slotoffset					INTEGER(0..32),
	iE-Extensions		ProtocolExtensionContainer { { ResourceSetTypeAperiodic-ExtIEs} }	OPTIONAL
}

ResourceSetTypeAperiodic-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RepetitionPeriod ::= INTEGER (0..131071, ...)

ReportingRequestType ::= SEQUENCE {
	eventType						EventType,
	reportingPeriodicityValue						ReportingPeriodicityValue		OPTIONAL,
	-- C-ifEventTypeisPeriodic: This IE shall be present if the Event Type IE is set to "periodic" in the Event Type IE.
	iE-Extensions					ProtocolExtensionContainer { {ReportingRequestType-ExtIEs} }	OPTIONAL
}

ReportingRequestType-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceType ::= CHOICE {
	periodic			ResourceTypePeriodic,
	semi-persistent		ResourceTypeSemi-persistent,
	aperiodic			ResourceTypeAperiodic,
	choice-extension				ProtocolIE-SingleContainer {{ ResourceType-ExtIEs }}
}

ResourceType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

ResourceTypePeriodic ::= SEQUENCE {
	periodicity		   ENUMERATED{slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, ...},
	offset				INTEGER(0..2559, ...),
	iE-Extensions		ProtocolExtensionContainer { { ResourceTypePeriodic-ExtIEs} }	OPTIONAL
}

ResourceTypePeriodic-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceTypeSemi-persistent ::= SEQUENCE {
	periodicity		   ENUMERATED{slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, ...},
	offset				INTEGER(0..2559, ...),
	iE-Extensions		ProtocolExtensionContainer { { ResourceTypeSemi-persistent-ExtIEs} }	OPTIONAL
}

ResourceTypeSemi-persistent-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceTypeAperiodic ::= SEQUENCE {
	aperiodicResourceType	   ENUMERATED{true, ...},
	iE-Extensions		ProtocolExtensionContainer { { ResourceTypeAperiodic-ExtIEs} }	OPTIONAL
}

ResourceTypeAperiodic-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceTypePos ::= CHOICE {
	periodic			ResourceTypePeriodicPos,
	semi-persistent		ResourceTypeSemi-persistentPos,
	aperiodic			ResourceTypeAperiodicPos,
	choice-extension	ProtocolIE-SingleContainer {{ ResourceTypePos-ExtIEs }}
}

ResourceTypePos-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

ResourceTypePeriodicPos ::= SEQUENCE {
	periodicity		   ENUMERATED{slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, slot5120, slot10240, slot40960, slot81920, ...},
	offset				INTEGER(0..81919, ...),
	iE-Extensions		ProtocolExtensionContainer { { ResourceTypePeriodicPos-ExtIEs} }	OPTIONAL
}

ResourceTypePeriodicPos-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceTypeSemi-persistentPos ::= SEQUENCE {
	periodicity		   ENUMERATED{slot1, slot2, slot4, slot5, slot8, slot10, slot16, slot20, slot32, slot40, slot64, slot80, slot160, slot320, slot640, slot1280, slot2560, slot5120, slot10240, slot40960, slot81920, ...},
	offset				INTEGER(0..81919, ...),
	iE-Extensions		ProtocolExtensionContainer { { ResourceTypeSemi-persistentPos-ExtIEs} }	OPTIONAL
}

ResourceTypeSemi-persistentPos-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ResourceTypeAperiodicPos ::= SEQUENCE {
	slotOffset          INTEGER (0..32),
	iE-Extensions		ProtocolExtensionContainer { { ResourceTypeAperiodicPos-ExtIEs} }	OPTIONAL
}

ResourceTypeAperiodicPos-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RLCDuplicationInformation ::= SEQUENCE {
	rLCDuplicationStateList 		RLCDuplicationStateList,
	primaryPathIndication			PrimaryPathIndication	OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { {RLCDuplicationInformation-ExtIEs} }	OPTIONAL
}

RLCDuplicationInformation-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RLCDuplicationStateList	::= SEQUENCE (SIZE(1..maxnoofRLCDuplicationState)) OF RLCDuplicationState-Item

RLCDuplicationState-Item ::=SEQUENCE {
	duplicationState		DuplicationState, 
	iE-Extensions	ProtocolExtensionContainer { {RLCDuplicationState-Item-ExtIEs } }	OPTIONAL,
	...
}


RLCDuplicationState-Item-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RLCFailureIndication ::= SEQUENCE {
	assocatedLCID				LCID,
	iE-Extensions				ProtocolExtensionContainer { {RLCFailureIndication-ExtIEs} } OPTIONAL
}

RLCFailureIndication-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RLCMode ::= ENUMERATED {
	rlc-am,
	rlc-um-bidirectional,
	rlc-um-unidirectional-ul,
	rlc-um-unidirectional-dl,
	...
}

RLC-Status ::= SEQUENCE {
	reestablishment-Indication 	Reestablishment-Indication,
	iE-Extensions				ProtocolExtensionContainer { { RLC-Status-ExtIEs } } OPTIONAL,
	...
}

RLC-Status-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RLFReportInformationList	::= SEQUENCE (SIZE(1.. maxnoofRLFReports)) OF RLFReportInformationItem

RLFReportInformationItem	::= SEQUENCE {
	nRUERLFReportContainer		NRUERLFReportContainer,
	uEAssitantIdentifier			GNB-DU-UE-F1AP-ID		OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { RLFReportInformationItem-ExtIEs} }	OPTIONAL,
	...
}

RLFReportInformationItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

RIMRSDetectionStatus ::= ENUMERATED {rs-detected, rs-disappeared, ...}

RRCContainer ::= OCTET STRING

RRCContainer-RRCSetupComplete ::= OCTET STRING

RRCDeliveryStatus ::= SEQUENCE	{
	delivery-status 			PDCP-SN,
	triggering-message			PDCP-SN,
	iE-Extensions				ProtocolExtensionContainer { { RRCDeliveryStatus-ExtIEs } }	OPTIONAL}

RRCDeliveryStatus-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


RRCDeliveryStatusRequest ::= ENUMERATED {true, ...}

RRCReconfigurationCompleteIndicator	::= ENUMERATED {
	true,
	 ...,
	failure
}

RRC-Version ::= SEQUENCE	{
	latest-RRC-Version			BIT STRING (SIZE(3)),
	iE-Extensions				ProtocolExtensionContainer { { RRC-Version-ExtIEs } }	OPTIONAL}

RRC-Version-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ID id-latest-RRC-Version-Enhanced		CRITICALITY ignore EXTENSION OCTET STRING (SIZE(3))		PRESENCE optional },
	...
}

RoutingID ::= OCTET STRING

-- S

SCell-FailedtoSetup-Item	::= SEQUENCE {
	sCell-ID			NRCGI	, 
	cause		Cause			OPTIONAL ,
	iE-Extensions	ProtocolExtensionContainer { { SCell-FailedtoSetup-ItemExtIEs } }	OPTIONAL,
	...
}

SCell-FailedtoSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SCell-FailedtoSetupMod-Item	::= SEQUENCE {
	sCell-ID			NRCGI	, 
	cause		Cause			OPTIONAL ,
	iE-Extensions	ProtocolExtensionContainer { { SCell-FailedtoSetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

SCell-FailedtoSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SCell-ToBeRemoved-Item	::= SEQUENCE {
	sCell-ID			NRCGI	, 
	iE-Extensions	ProtocolExtensionContainer { { SCell-ToBeRemoved-ItemExtIEs } }	OPTIONAL,
	...
}

SCell-ToBeRemoved-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SCell-ToBeSetup-Item ::= SEQUENCE {
	sCell-ID			NRCGI	,
	sCellIndex			SCellIndex, 
	sCellULConfigured		CellULConfigured 	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SCell-ToBeSetup-ItemExtIEs } }	OPTIONAL,
	...
}

SCell-ToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-ServingCellMO		CRITICALITY ignore	EXTENSION ServingCellMO		PRESENCE optional	},
	...
}

SCell-ToBeSetupMod-Item	::= SEQUENCE {
	sCell-ID			NRCGI	, 
	sCellIndex			SCellIndex,
	sCellULConfigured		CellULConfigured 	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SCell-ToBeSetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

SCell-ToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-ServingCellMO		CRITICALITY ignore	EXTENSION ServingCellMO		PRESENCE optional	},
	...
}

SCellIndex ::=INTEGER (1..31, ...) 

SCGIndicator	::=	ENUMERATED{released, ...}

SCS-SpecificCarrier ::=            SEQUENCE {
    offsetToCarrier                     INTEGER (0..2199,...),
    subcarrierSpacing                   ENUMERATED {kHz15, kHz30, kHz60, kHz120,...},
    carrierBandwidth                    INTEGER (1..275,...),
	iE-Extensions						ProtocolExtensionContainer { { SCS-SpecificCarrier-ExtIEs } } OPTIONAL
}

SCS-SpecificCarrier-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Search-window-information ::= SEQUENCE {
	expectedPropagationDelay		INTEGER (-3841..3841,...),
	delayUncertainty				INTEGER (1..246,...),
	iE-Extensions					ProtocolExtensionContainer { { Search-window-information-ExtIEs } } OPTIONAL
}

Search-window-information-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SerialNumber ::= BIT STRING (SIZE (16))

SIBType-PWS ::=INTEGER (6..8, ...)

SelectedBandCombinationIndex ::= OCTET STRING

SelectedFeatureSetEntryIndex ::= OCTET STRING

CG-ConfigInfo ::= OCTET STRING

ServCellIndex ::= INTEGER (0..31, ...)

ServingCellMO ::= INTEGER (1..64, ...)

Served-Cell-Information ::= SEQUENCE {
	nRCGI							NRCGI,
	nRPCI							NRPCI,
	fiveGS-TAC							FiveGS-TAC			OPTIONAL,
	configured-EPS-TAC				Configured-EPS-TAC 		OPTIONAL,
	servedPLMNs					ServedPLMNs-List,
	nR-Mode-Info					NR-Mode-Info, 
	measurementTimingConfiguration	OCTET STRING,
	iE-Extensions		ProtocolExtensionContainer { {Served-Cell-Information-ExtIEs} } OPTIONAL,
	...
}

Served-Cell-Information-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{	ID id-RANAC							CRITICALITY ignore	EXTENSION RANAC							PRESENCE optional }|
	{	ID id-ExtendedServedPLMNs-List		CRITICALITY ignore	EXTENSION ExtendedServedPLMNs-List	PRESENCE optional }|
	{	ID id-Cell-Direction				CRITICALITY ignore	EXTENSION Cell-Direction				PRESENCE optional }|
	{	ID id-BPLMN-ID-Info-List			CRITICALITY ignore	EXTENSION BPLMN-ID-Info-List			PRESENCE optional }|
	{	ID id-Cell-Type						CRITICALITY ignore	EXTENSION CellType						PRESENCE optional}|
	{	ID id-ConfiguredTACIndication		CRITICALITY ignore	EXTENSION ConfiguredTACIndication		PRESENCE optional }|
	{	ID id-AggressorgNBSetID				CRITICALITY ignore	EXTENSION AggressorgNBSetID				PRESENCE optional}|
	{	ID id-VictimgNBSetID				CRITICALITY ignore	EXTENSION VictimgNBSetID				PRESENCE optional}|
	{	ID id-IAB-Info-IAB-DU				CRITICALITY ignore	EXTENSION IAB-Info-IAB-DU				PRESENCE optional}|
	{	ID id-SSB-PositionsInBurst			CRITICALITY ignore	EXTENSION SSB-PositionsInBurst			PRESENCE optional }|
	{	ID id-NRPRACHConfig					CRITICALITY ignore	EXTENSION NRPRACHConfig					PRESENCE optional }|
	{	ID id-SFN-Offset					CRITICALITY ignore	EXTENSION SFN-Offset					PRESENCE optional }|
	{	ID id-NPNBroadcastInformation		CRITICALITY reject 	EXTENSION NPNBroadcastInformation		PRESENCE optional },
	...
}

SFN-Offset ::= SEQUENCE {
	sFN-Time-Offset					BIT STRING (SIZE(24)),
	iE-Extensions		ProtocolExtensionContainer { {SFN-Offset-ExtIEs} } OPTIONAL,
	...
}

SFN-Offset-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
		...
}

Served-Cells-To-Add-Item ::= SEQUENCE {
	served-Cell-Information		Served-Cell-Information,
	gNB-DU-System-Information	GNB-DU-System-Information	 OPTIONAL, 
	iE-Extensions				ProtocolExtensionContainer { { Served-Cells-To-Add-ItemExtIEs} }	OPTIONAL,
	...
}

Served-Cells-To-Add-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Served-Cells-To-Delete-Item ::= SEQUENCE {
	oldNRCGI					NRCGI	,
	iE-Extensions				ProtocolExtensionContainer { { Served-Cells-To-Delete-ItemExtIEs } }	OPTIONAL,
	...
}

Served-Cells-To-Delete-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Served-Cells-To-Modify-Item ::= SEQUENCE {
	oldNRCGI					NRCGI							,
	served-Cell-Information		Served-Cell-Information		,
	gNB-DU-System-Information	GNB-DU-System-Information 	OPTIONAL	,
	iE-Extensions				ProtocolExtensionContainer { { Served-Cells-To-Modify-ItemExtIEs } }	OPTIONAL,
	...
}

Served-Cells-To-Modify-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Served-EUTRA-Cells-Information::= SEQUENCE {
	eUTRA-Mode-Info						EUTRA-Mode-Info,
	protectedEUTRAResourceIndication	ProtectedEUTRAResourceIndication,
	iE-Extensions						ProtocolExtensionContainer { {Served-EUTRA-Cell-Information-ExtIEs} } OPTIONAL,
	...
}

Served-EUTRA-Cell-Information-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Service-State ::= ENUMERATED {
	in-service,
	out-of-service,
	...
}

Service-Status ::= SEQUENCE {
	service-state				Service-State,
	switchingOffOngoing			ENUMERATED {true, ...}	OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { Service-Status-ExtIEs } }	OPTIONAL,
	...
}

Service-Status-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


RelativeTime1900 ::= 	BIT STRING (SIZE (64))

ShortDRXCycleLength ::=  ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms7, ms8, ms10, ms14, ms16, ms20, ms30, ms32, ms35, ms40, ms64, ms80, ms128, ms160, ms256, ms320, ms512, ms640, ...}

ShortDRXCycleTimer ::= INTEGER (1..16)

SIB1-message ::= OCTET STRING

SIB10-message ::= OCTET STRING

SIB12-message ::= OCTET STRING

SIB13-message ::= OCTET STRING

SIB14-message ::= OCTET STRING

SItype ::= INTEGER (1..32, ...)

SItype-List ::= SEQUENCE (SIZE(1.. maxnoofSITypes)) OF SItype-Item

SItype-Item ::= SEQUENCE {
	sItype		SItype	,
	iE-Extensions	ProtocolExtensionContainer { { SItype-ItemExtIEs } }	OPTIONAL
}

SItype-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SibtypetobeupdatedListItem ::= SEQUENCE {
	sIBtype 			INTEGER (2..32,...), 
	sIBmessage			OCTET STRING, 
	valueTag			INTEGER (0..31,...), 
	iE-Extensions	ProtocolExtensionContainer { { SibtypetobeupdatedListItem-ExtIEs } }	OPTIONAL,
	...
}

SibtypetobeupdatedListItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ID	id-areaScope	CRITICALITY ignore	EXTENSION	AreaScope	PRESENCE optional},
	...
}

SLDRBID ::= INTEGER (1..512, ...)

SLDRBInformation ::= SEQUENCE {
	sLDRB-QoS				PC5QoSParameters,
	flowsMappedToSLDRB-List	FlowsMappedToSLDRB-List,
	...
}

SLDRBs-FailedToBeModified-Item	::= SEQUENCE {
	sLDRBID		SLDRBID		,
	cause		Cause		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-FailedToBeModified-ItemExtIEs } }	OPTIONAL
}

SLDRBs-FailedToBeModified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-FailedToBeSetup-Item	::= SEQUENCE {
	sLDRBID	SLDRBID,
	cause	Cause	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-FailedToBeSetup-ItemExtIEs } }		OPTIONAL
}

SLDRBs-FailedToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-FailedToBeSetupMod-Item	::= SEQUENCE {
	sLDRBID		SLDRBID	,
	cause		Cause			OPTIONAL ,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-FailedToBeSetupMod-ItemExtIEs } }	OPTIONAL
}

SLDRBs-FailedToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-Modified-Item	::= SEQUENCE {
	sLDRBID							SLDRBID,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-Modified-ItemExtIEs } }	OPTIONAL
}

SLDRBs-Modified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-ModifiedConf-Item	::= SEQUENCE {
	sLDRBID							SLDRBID,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-ModifiedConf-ItemExtIEs } }	OPTIONAL
}

SLDRBs-ModifiedConf-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-Required-ToBeModified-Item	::= SEQUENCE {
	sLDRBID							SLDRBID,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-Required-ToBeModified-ItemExtIEs } }	OPTIONAL
}

SLDRBs-Required-ToBeModified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-Required-ToBeReleased-Item	::= SEQUENCE {
	sLDRBID		SLDRBID,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-Required-ToBeReleased-ItemExtIEs } }	OPTIONAL
}

SLDRBs-Required-ToBeReleased-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-Setup-Item ::= SEQUENCE {
	sLDRBID							SLDRBID,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-Setup-ItemExtIEs } }	OPTIONAL
}

SLDRBs-Setup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-SetupMod-Item	::= SEQUENCE {
	sLDRBID							SLDRBID,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-SetupMod-ItemExtIEs } }	OPTIONAL
}

SLDRBs-SetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-ToBeModified-Item	::= SEQUENCE {
	sLDRBID						SLDRBID,
	sLDRBInformation				SLDRBInformation		OPTIONAL,
	rLCMode						RLCMode			OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-ToBeModified-ItemExtIEs } }	OPTIONAL
}

SLDRBs-ToBeModified-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-ToBeReleased-Item	::= SEQUENCE {
	sLDRBID	        SLDRBID,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-ToBeReleased-ItemExtIEs } }	OPTIONAL
}

SLDRBs-ToBeReleased-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-ToBeSetup-Item ::= SEQUENCE	{
	sLDRBID						SLDRBID,
	sLDRBInformation				SLDRBInformation,
	rLCMode						RLCMode, 

	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-ToBeSetup-ItemExtIEs } }	OPTIONAL
}

SLDRBs-ToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SLDRBs-ToBeSetupMod-Item	::= SEQUENCE {
	sLDRBID						SLDRBID,
	sLDRBInformation				SLDRBInformation,
	rLCMode						RLCMode			OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SLDRBs-ToBeSetupMod-ItemExtIEs } }	OPTIONAL
}

SLDRBs-ToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SL-PHY-MAC-RLC-Config ::= OCTET STRING

SL-ConfigDedicatedEUTRA-Info ::= OCTET STRING

SliceAvailableCapacity ::= SEQUENCE {
	sliceAvailableCapacityList	SliceAvailableCapacityList,
	iE-Extensions				ProtocolExtensionContainer { { SliceAvailableCapacity-ExtIEs} } OPTIONAL
}

SliceAvailableCapacity-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SliceAvailableCapacityList ::= SEQUENCE (SIZE(1.. maxnoofBPLMNsNR)) OF SliceAvailableCapacityItem

SliceAvailableCapacityItem ::= SEQUENCE {
	pLMNIdentity					PLMN-Identity, 
	sNSSAIAvailableCapacity-List	SNSSAIAvailableCapacity-List,
	iE-Extensions	ProtocolExtensionContainer { { SliceAvailableCapacityItem-ExtIEs} } OPTIONAL
}

SliceAvailableCapacityItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SNSSAIAvailableCapacity-List ::= SEQUENCE (SIZE(1.. maxnoofSliceItems)) OF SNSSAIAvailableCapacity-Item

SNSSAIAvailableCapacity-Item ::= SEQUENCE {
	sNSSAI		SNSSAI,
	sliceAvailableCapacityValueDownlink	INTEGER (0..100)	OPTIONAL, 
	sliceAvailableCapacityValueUplink	INTEGER (0..100)	OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { SNSSAIAvailableCapacity-Item-ExtIEs } }	OPTIONAL
}

SNSSAIAvailableCapacity-Item-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SliceSupportList ::= SEQUENCE (SIZE(1.. maxnoofSliceItems)) OF SliceSupportItem

SliceSupportItem ::= SEQUENCE {
	sNSSAI	SNSSAI,
	iE-Extensions				ProtocolExtensionContainer { { SliceSupportItem-ExtIEs } }	OPTIONAL
}

SliceSupportItem-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SliceToReportList ::= SEQUENCE (SIZE(1.. maxnoofBPLMNsNR)) OF SliceToReportItem

SliceToReportItem ::= SEQUENCE {
	pLMNIdentity				PLMN-Identity, 
	sNSSAIlist					SNSSAI-list,
	iE-Extensions				ProtocolExtensionContainer { { SliceToReportItem-ExtIEs} } OPTIONAL
}

SliceToReportItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SlotNumber ::= INTEGER (0..79)

SNSSAI-list ::= SEQUENCE (SIZE(1.. maxnoofSliceItems)) OF SNSSAI-Item

SNSSAI-Item ::= SEQUENCE {
	sNSSAI		SNSSAI,
	iE-Extensions				ProtocolExtensionContainer { { SNSSAI-Item-ExtIEs } }	OPTIONAL
}

SNSSAI-Item-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

Slot-Configuration-List ::= SEQUENCE (SIZE(1.. maxnoofslots)) OF Slot-Configuration-Item

Slot-Configuration-Item ::= SEQUENCE {
	slotIndex				INTEGER (0..5119, ...),
	symbolAllocInSlot		SymbolAllocInSlot,
	iE-Extensions	ProtocolExtensionContainer { { Slot-Configuration-ItemExtIEs } }	OPTIONAL
}

Slot-Configuration-ItemExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


SNSSAI ::= SEQUENCE {
	sST			OCTET STRING (SIZE(1)),
	sD			OCTET STRING (SIZE(3)) 	OPTIONAL	,
	iE-Extensions				ProtocolExtensionContainer { { SNSSAI-ExtIEs } }	OPTIONAL
}

SNSSAI-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SpatialDirectionInformation ::= SEQUENCE {
	nR-PRSBeamInformation			NR-PRSBeamInformation,
	iE-Extensions					ProtocolExtensionContainer { { SpatialDirectionInformation-ExtIEs } } OPTIONAL
}

SpatialDirectionInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SpatialRelationInfo ::= SEQUENCE {
	spatialRelationforResourceID					SpatialRelationforResourceID,
	iE-Extensions		ProtocolExtensionContainer { {SpatialRelationInfo-ExtIEs} }	OPTIONAL
}

SpatialRelationInfo-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SpatialRelationforResourceID ::= SEQUENCE (SIZE(1..maxnoofSpatialRelations)) OF SpatialRelationforResourceIDItem

SpatialRelationforResourceIDItem ::= SEQUENCE {
	referenceSignal		ReferenceSignal,
	iE-Extensions		ProtocolExtensionContainer { {SpatialRelationforResourceIDItem-ExtIEs} }	OPTIONAL
}

SpatialRelationforResourceIDItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SpatialRelationPerSRSResource ::= SEQUENCE {
	spatialRelationPerSRSResource-List	SpatialRelationPerSRSResource-List,
	iE-Extensions		ProtocolExtensionContainer { { SpatialRelationPerSRSResource-ExtIEs} }	OPTIONAL,
	...
}

SpatialRelationPerSRSResource-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SpatialRelationPerSRSResource-List::= SEQUENCE(SIZE (1.. maxnoSRS-ResourcePerSet)) OF SpatialRelationPerSRSResourceItem

SpatialRelationPerSRSResourceItem ::= SEQUENCE {
	referenceSignal		ReferenceSignal,
	iE-Extensions		ProtocolExtensionContainer { { SpatialRelationPerSRSResourceItem-ExtIEs} }	OPTIONAL,
	...
}

SpatialRelationPerSRSResourceItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SpatialRelationPos ::= CHOICE {
	sSBPos					SSB,
	pRSInformationPos		PRSInformationPos,
	choice-extension		ProtocolIE-SingleContainer {{ SpatialInformationPos-ExtIEs }}
}

SpatialInformationPos-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

SpectrumSharingGroupID ::= INTEGER (1..maxCellineNB)

SRBID ::= INTEGER (0..3, ...)

SRBs-FailedToBeSetup-Item	::= SEQUENCE {
	sRBID		SRBID	,
	cause		Cause	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-FailedToBeSetup-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-FailedToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRBs-FailedToBeSetupMod-Item	::= SEQUENCE {
	sRBID		SRBID		,
	cause		Cause		OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-FailedToBeSetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-FailedToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRBs-Modified-Item ::= SEQUENCE {
	sRBID							SRBID,
	lCID							LCID,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-Modified-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-Modified-ItemExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRBs-Required-ToBeReleased-Item	::= SEQUENCE {
	sRBID	SRBID,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-Required-ToBeReleased-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-Required-ToBeReleased-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRBs-Setup-Item ::= SEQUENCE {
	sRBID							SRBID,
	lCID								LCID,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-Setup-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-Setup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRBs-SetupMod-Item ::= SEQUENCE {
	sRBID						SRBID,
	lCID							LCID,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-SetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-SetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRBs-ToBeReleased-Item	::= SEQUENCE {
	sRBID		SRBID,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-ToBeReleased-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-ToBeReleased-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRBs-ToBeSetup-Item ::= SEQUENCE {
	sRBID	 SRBID	,
	duplicationIndication	DuplicationIndication	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-ToBeSetup-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-ToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-AdditionalDuplicationIndication	CRITICALITY ignore	EXTENSION AdditionalDuplicationIndication		PRESENCE optional	},
	...
}

SRBs-ToBeSetupMod-Item	::= SEQUENCE {
	sRBID	SRBID,
	duplicationIndication	DuplicationIndication	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SRBs-ToBeSetupMod-ItemExtIEs } }	OPTIONAL,
	...
}

SRBs-ToBeSetupMod-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-AdditionalDuplicationIndication	CRITICALITY ignore	EXTENSION AdditionalDuplicationIndication		PRESENCE optional	},
	...
}

SRSCarrier-List ::= SEQUENCE (SIZE(1.. maxnoSRS-Carriers)) OF SRSCarrier-List-Item

SRSCarrier-List-Item ::= SEQUENCE {
	pointA							INTEGER (0..3279165),
	uplinkChannelBW-PerSCS-List		UplinkChannelBW-PerSCS-List,
	activeULBWP						ActiveULBWP,
	pci								NRPCI		OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { SRSCarrier-List-Item-ExtIEs } } OPTIONAL
}

SRSCarrier-List-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRSConfig  ::= SEQUENCE {
	sRSResource-List			SRSResource-List 		OPTIONAL,
	posSRSResource-List			PosSRSResource-List 	OPTIONAL,
	sRSResourceSet-List			SRSResourceSet-List 	OPTIONAL,
	posSRSResourceSet-List		PosSRSResourceSet-List 	OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { SRSConfig-ExtIEs } } OPTIONAL
}

SRSConfig-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRSConfiguration ::= SEQUENCE {
	sRSCarrier-List		SRSCarrier-List,
	iE-Extensions		ProtocolExtensionContainer { { SRSConfiguration-ExtIEs } } OPTIONAL
}

SRSConfiguration-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
} 

SrsFrequency ::= INTEGER (0..3279165)

SRSPosResourceID ::= INTEGER (0..63)

SRSResource::= SEQUENCE {
	sRSResourceID                  	SRSResourceID,
	nrofSRS-Ports                   ENUMERATED {port1, ports2, ports4},
	transmissionComb				TransmissionComb,
	startPosition                   INTEGER (0..13),
    nrofSymbols                     ENUMERATED {n1, n2, n4},
    repetitionFactor              	ENUMERATED {n1, n2, n4},
    freqDomainPosition              INTEGER (0..67),
	freqDomainShift                 INTEGER (0..268),
	c-SRS                           INTEGER (0..63),
	b-SRS                           INTEGER (0..3),
	b-hop                           INTEGER (0..3),
	groupOrSequenceHopping          ENUMERATED { neither, groupHopping, sequenceHopping },
	resourceType					ResourceType,
	sequenceId                      INTEGER (0..1023),
	iE-Extensions					ProtocolExtensionContainer { { SRSResource-ExtIEs } } OPTIONAL
}

SRSResource-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRSResourceID ::= INTEGER (0..63)

SRSResourceID-List::= SEQUENCE (SIZE (1..maxnoSRS-ResourcePerSet)) OF SRSResourceID

SRSResource-List ::= SEQUENCE (SIZE (1..maxnoSRS-Resources)) OF SRSResource

SRSResourceSet::= SEQUENCE {
	sRSResourceSetID                SRSResourceSetID,
	sRSResourceID-List				SRSResourceID-List,
	resourceSetType					ResourceSetType,
	iE-Extensions					ProtocolExtensionContainer { { SRSResourceSet-ExtIEs } } OPTIONAL
}

SRSResourceSet-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SRSResourceSetID ::= INTEGER (0..15, ...)

SRSResourceSetList ::= SEQUENCE (SIZE(1.. maxnoSRS-ResourceSets)) OF SRSResourceSetItem

SRSResourceSetItem ::= SEQUENCE {
	numSRSresourcesperset		INTEGER (1..16, ...)	OPTIONAL,
	periodicityList				PeriodicityList			OPTIONAL,
	spatialRelationInfo			SpatialRelationInfo		OPTIONAL,
	pathlossReferenceInfo		PathlossReferenceInfo	OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { SRSResourceSetItemExtIEs } }	OPTIONAL
}

SRSResourceSetItemExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-SRSSpatialRelationPerSRSResource	CRITICALITY ignore	EXTENSION SpatialRelationPerSRSResource PRESENCE optional},
	...
}

SRSResourceSet-List ::= SEQUENCE (SIZE (1..maxnoSRS-ResourceSets)) OF SRSResourceSet 

SRSResourceTrigger ::= SEQUENCE {
	aperiodicSRSResourceTriggerList					AperiodicSRSResourceTriggerList,
	iE-Extensions		ProtocolExtensionContainer { {SRSResourceTrigger-ExtIEs} }	OPTIONAL
}

SRSResourceTrigger-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


SSB ::= SEQUENCE {
	pCI-NR				NRPCI,
	ssb-index			SSB-Index	OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { {SSB-ExtIEs} }	OPTIONAL
}

SSB-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SSB-freqInfo ::= INTEGER (0..maxNRARFCN) 

SSB-Index ::= INTEGER(0..63)

SSB-subcarrierSpacing ::=  ENUMERATED {kHz15, kHz30, kHz120, kHz240, spare3, spare2, spare1, ...}

SSB-transmissionPeriodicity	::= ENUMERATED {sf10, sf20, sf40, sf80, sf160, sf320, sf640, ...}

SSB-transmissionTimingOffset ::= INTEGER (0..127, ...)

SSB-transmissionBitmap ::= CHOICE {
	shortBitmap			BIT STRING (SIZE (4)),
	mediumBitmap		BIT STRING (SIZE (8)),
	longBitmap			BIT STRING (SIZE (64)),
	choice-extension	ProtocolIE-SingleContainer { { SSB-transmisisonBitmap-ExtIEs} }
}

SSB-transmisisonBitmap-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

SSBAreaCapacityValueList ::= SEQUENCE (SIZE(1.. maxnoofSSBAreas)) OF	SSBAreaCapacityValueItem

SSBAreaCapacityValueItem ::= SEQUENCE {
	sSBIndex				INTEGER(0..63),
	sSBAreaCapacityValue	INTEGER (0..100),
	iE-Extensions	ProtocolExtensionContainer { { SSBAreaCapacityValueItem-ExtIEs} } OPTIONAL
}

SSBAreaCapacityValueItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SSBAreaRadioResourceStatusList::= SEQUENCE (SIZE(1.. maxnoofSSBAreas)) OF	SSBAreaRadioResourceStatusItem

SSBAreaRadioResourceStatusItem::= SEQUENCE {
	sSBIndex					INTEGER(0..63),
	sSBAreaDLGBRPRBusage		INTEGER (0..100),
	sSBAreaULGBRPRBusage		INTEGER (0..100),
	sSBAreaDLnon-GBRPRBusage	INTEGER (0..100),
	sSBAreaULnon-GBRPRBusage	INTEGER (0..100),
	sSBAreaDLTotalPRBusage		INTEGER (0..100),
	sSBAreaULTotalPRBusage		INTEGER (0..100),
	dLschedulingPDCCHCCEusage	INTEGER (0..100)		OPTIONAL,
	uLschedulingPDCCHCCEusage	INTEGER (0..100) 		OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { SSBAreaRadioResourceStatusItem-ExtIEs} } OPTIONAL
}

SSBAreaRadioResourceStatusItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SSBInformation ::= SEQUENCE {
	sSBInformationList	SSBInformationList,
	iE-Extensions	ProtocolExtensionContainer { { SSBInformation-ExtIEs } }	OPTIONAL
}

SSBInformation-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SSBInformationList ::= SEQUENCE (SIZE(1.. maxnoofSSBs)) OF SSBInformationItem

SSBInformationItem ::= SEQUENCE {
	sSB-Configuration	SSB-TF-Configuration,
	pCI-NR				NRPCI,
	iE-Extensions	ProtocolExtensionContainer { { SSBInformationItem-ExtIEs } }	OPTIONAL
}

SSBInformationItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SSB-PositionsInBurst ::= CHOICE {
	shortBitmap						BIT STRING (SIZE (4)),
	mediumBitmap					BIT STRING (SIZE (8)),
	longBitmap						BIT STRING (SIZE (64)),
	choice-extension				ProtocolIE-SingleContainer { {SSB-PositionsInBurst-ExtIEs} }
}

SSB-PositionsInBurst-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

SSB-TF-Configuration ::= SEQUENCE {
	sSB-frequency				INTEGER (0..3279165),
	sSB-subcarrier-spacing		ENUMERATED {kHz15, kHz30, kHz60, kHz120, kHz240, ...},
	sSB-Transmit-power			INTEGER (-60..50),
	sSB-periodicity				ENUMERATED {ms5, ms10, ms20, ms40, ms80, ms160, ...},
	sSB-half-frame-offset		INTEGER(0..1),
	sSB-SFN-offset				INTEGER(0..15),
	sSB-position-in-burst		SSB-PositionsInBurst		OPTIONAL,
	sFNInitialisationTime		RelativeTime1900		OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { SSB-TF-Configuration-ExtIEs} } OPTIONAL
}

SSB-TF-Configuration-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}


SSBToReportList ::= SEQUENCE (SIZE(1.. maxnoofSSBAreas)) OF SSBToReportItem

SSBToReportItem ::= SEQUENCE {
	sSBIndex					INTEGER(0..63),
	iE-Extensions				ProtocolExtensionContainer { { SSBToReportItem-ExtIEs} } OPTIONAL
}

SSBToReportItem-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SUL-Information ::= SEQUENCE {
	sUL-NRARFCN							INTEGER (0..maxNRARFCN),
	sUL-transmission-Bandwidth			Transmission-Bandwidth,
	iE-Extensions				ProtocolExtensionContainer { { SUL-InformationExtIEs} } OPTIONAL,
	...
}

SUL-InformationExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-CarrierList				CRITICALITY ignore	EXTENSION NRCarrierList			PRESENCE optional }|
	{ ID id-FrequencyShift7p5khz	CRITICALITY ignore	EXTENSION FrequencyShift7p5khz	PRESENCE optional },
	...
}

SubcarrierSpacing ::=	ENUMERATED { kHz15, kHz30, kHz60, kHz120, kHz240, spare3, spare2, spare1, ...}

SubscriberProfileIDforRFP ::= INTEGER (1..256, ...)

SULAccessIndication ::= ENUMERATED {true,...}


SupportedSULFreqBandItem ::= SEQUENCE {
	freqBandIndicatorNr 			INTEGER (1..1024,...),
	iE-Extensions				ProtocolExtensionContainer { { SupportedSULFreqBandItem-ExtIEs} } OPTIONAL,
	...
}

SupportedSULFreqBandItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

SymbolAllocInSlot ::= CHOICE {
	all-DL				NULL,
	all-UL				NULL, 
	both-DL-and-UL			NumDLULSymbols,	
	choice-extension			ProtocolIE-SingleContainer { { SymbolAllocInSlot-ExtIEs } }
}

SymbolAllocInSlot-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

SystemFrameNumber ::= INTEGER (0..1023)

SystemInformationAreaID ::=BIT STRING (SIZE (24))

-- T

FiveGS-TAC ::= OCTET STRING (SIZE(3))

Configured-EPS-TAC ::= OCTET STRING (SIZE(2))

TargetCellList ::= SEQUENCE (SIZE(1..maxnoofCHOcells)) OF TargetCellList-Item

TargetCellList-Item ::= SEQUENCE {
	target-cell								NRCGI,
	iE-Extensions							ProtocolExtensionContainer { { TargetCellList-Item-ExtIEs} } OPTIONAL
}

TargetCellList-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TDD-Info ::= SEQUENCE {
	nRFreqInfo							NRFreqInfo,
	transmission-Bandwidth			Transmission-Bandwidth,
	iE-Extensions				ProtocolExtensionContainer { {TDD-Info-ExtIEs} } OPTIONAL,
	...
}

TDD-Info-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ID	id-IntendedTDD-DL-ULConfig	CRITICALITY ignore	EXTENSION	IntendedTDD-DL-ULConfig	PRESENCE optional}|
	{ID id-TDD-UL-DLConfigCommonNR	CRITICALITY ignore	EXTENSION TDD-UL-DLConfigCommonNR	PRESENCE optional }|
	{ID id-CarrierList				CRITICALITY ignore	EXTENSION NRCarrierList				PRESENCE optional },
	...
}

TDD-UL-DLConfigCommonNR ::= OCTET STRING

TimeReferenceInformation ::= SEQUENCE {
	referenceTime					ReferenceTime,
	referenceSFN					ReferenceSFN,
	uncertainty						Uncertainty,
	timeInformationType				TimeInformationType,
	iE-Extensions		ProtocolExtensionContainer { {TimeReferenceInformation-ExtIEs} }	OPTIONAL
}

TimeReferenceInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TimeInformationType ::= ENUMERATED {localClock}

TimeStamp ::= SEQUENCE {
	systemFrameNumber		SystemFrameNumber,
	slotIndex				TimeStampSlotIndex,
	measurementTime			RelativeTime1900	OPTIONAL,
	iE-Extension			ProtocolExtensionContainer { { TimeStamp-ExtIEs} }	OPTIONAL
}

TimeStamp-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TimeStampSlotIndex ::= CHOICE {
	sCS-15			INTEGER(0..9),
	sCS-30			INTEGER(0..19),
	sCS-60			INTEGER(0..39),
	sCS-120			INTEGER(0..79),
	choice-extension		ProtocolIE-SingleContainer { { TimeStampSlotIndex-ExtIEs} }
}

TimeStampSlotIndex-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TimeToWait ::= ENUMERATED {v1s, v2s, v5s, v10s, v20s, v60s, ...}

TimingMeasurementQuality ::= SEQUENCE {
	measurementQuality		INTEGER(0..31),
	resolution				ENUMERATED{m0dot1, m1, m10, m30, ...},
	iE-Extensions		ProtocolExtensionContainer { { TimingMeasurementQuality-ExtIEs} }	OPTIONAL
}

TimingMeasurementQuality-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TNLAssociationUsage ::= ENUMERATED {
	ue,
	non-ue,
	both, 
	...
}

TNLCapacityIndicator::= SEQUENCE {
	dLTNLOfferedCapacity		INTEGER (1.. 16777216,...),
	dLTNLAvailableCapacity		INTEGER (0.. 100,...),
	uLTNLOfferedCapacity		INTEGER (1.. 16777216,...),
	uLTNLAvailableCapacity		INTEGER (0.. 100,...),
	iE-Extensions	ProtocolExtensionContainer { { TNLCapacityIndicator-ExtIEs} } OPTIONAL
}

TNLCapacityIndicator-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TraceActivation ::= SEQUENCE {
	traceID								TraceID,
	interfacesToTrace					InterfacesToTrace,
	traceDepth							TraceDepth,
	traceCollectionEntityIPAddress		TransportLayerAddress,
	iE-Extensions		ProtocolExtensionContainer { {TraceActivation-ExtIEs} }	OPTIONAL
}

TraceActivation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ID id-mdtConfiguration	CRITICALITY ignore	EXTENSION	MDTConfiguration		PRESENCE optional}|
	{ID id-TraceCollectionEntityURI	CRITICALITY ignore	EXTENSION URI-address		PRESENCE optional	},
	...
}

TraceDepth ::= ENUMERATED { 
	minimum,
	medium,
	maximum,
	minimumWithoutVendorSpecificExtension,
	mediumWithoutVendorSpecificExtension,
	maximumWithoutVendorSpecificExtension,
	...
}

TraceID ::= OCTET STRING (SIZE(8))

TrafficMappingInfo	::= CHOICE {
	iPtolayer2TrafficMappingInfo					IPtolayer2TrafficMappingInfo,
	bAPlayerBHRLCchannelMappingInfo					BAPlayerBHRLCchannelMappingInfo,
	choice-extension								ProtocolIE-SingleContainer { { TrafficMappingInfo-ExtIEs} }
}

TrafficMappingInfo-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TransportLayerAddress		::= BIT STRING (SIZE(1..160, ...))

TransactionID				::= INTEGER (0..255, ...)

Transmission-Bandwidth ::= SEQUENCE {
	nRSCS	NRSCS,
	nRNRB	NRNRB,
	iE-Extensions				ProtocolExtensionContainer { { Transmission-Bandwidth-ExtIEs} } OPTIONAL,
	...
}

Transmission-Bandwidth-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TransmissionComb ::= CHOICE {
	n2    SEQUENCE {
            combOffset-n2              INTEGER (0..1),
            cyclicShift-n2             INTEGER (0..7)
        },
    n4    SEQUENCE {
            combOffset-n4              INTEGER (0..3),
            cyclicShift-n4             INTEGER (0..11)
        },
	choice-extension				ProtocolIE-SingleContainer { { TransmissionComb-ExtIEs} }
}
TransmissionComb-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TransmissionCombPos ::= CHOICE {
	n2    SEQUENCE {
            combOffset-n2              INTEGER (0..1),
            cyclicShift-n2             INTEGER (0..7)
        },
    n4    SEQUENCE {
            combOffset-n4              INTEGER (0..3),
            cyclicShift-n4             INTEGER (0..11)
        },
    n8    SEQUENCE {
            combOffset-n8              INTEGER (0..7),
            cyclicShift-n8             INTEGER (0..5)
        },

	choice-extension				ProtocolIE-SingleContainer { { TransmissionCombPos-ExtIEs} }
}
TransmissionCombPos-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TransmissionStopIndicator ::= ENUMERATED {true, ... }

Transport-UP-Layer-Address-Info-To-Add-List	::= SEQUENCE (SIZE(1.. maxnoofTLAs)) OF Transport-UP-Layer-Address-Info-To-Add-Item

Transport-UP-Layer-Address-Info-To-Add-Item ::= SEQUENCE {
	iP-SecTransportLayerAddress		TransportLayerAddress,
	gTPTransportLayerAddressToAdd			GTPTLAs							OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { Transport-UP-Layer-Address-Info-To-Add-ItemExtIEs } }	OPTIONAL
}

Transport-UP-Layer-Address-Info-To-Add-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= { 
	...
}

Transport-UP-Layer-Address-Info-To-Remove-List	::= SEQUENCE (SIZE(1.. maxnoofTLAs)) OF Transport-UP-Layer-Address-Info-To-Remove-Item

Transport-UP-Layer-Address-Info-To-Remove-Item ::= SEQUENCE {
	iP-SecTransportLayerAddress		TransportLayerAddress,
	gTPTransportLayerAddressToRemove			GTPTLAs							OPTIONAL,
	iE-Extensions					ProtocolExtensionContainer { { Transport-UP-Layer-Address-Info-To-Remove-ItemExtIEs } }	OPTIONAL
}

Transport-UP-Layer-Address-Info-To-Remove-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= { 
	...
}

TransmissionActionIndicator ::= ENUMERATED {stop, ..., restart }

TRPID ::= INTEGER (0.. maxnoofTRPs, ...)

TRPInformation ::= SEQUENCE {
	tRPID							TRPID,
	tRPInformationTypeResponseList	TRPInformationTypeResponseList,
	iE-Extensions					ProtocolExtensionContainer { { TRPInformation-ExtIEs } }		OPTIONAL
}

TRPInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TRPInformationItem ::= SEQUENCE {
	tRPInformation					TRPInformation,
	iE-Extensions					ProtocolExtensionContainer { { TRPInformationItem-ExtIEs } }	OPTIONAL
}

TRPInformationItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= { 
	...
}

TRPInformationTypeItem ::= ENUMERATED { 
		nrPCI,
		nG-RAN-CGI,
		arfcn, 
		pRSConfig,
		sSBConfig,
		sFNInitTime,
		spatialDirectInfo,
		geoCoord,
		...,
		trp-type
}


TRPInformationTypeResponseList ::= SEQUENCE (SIZE(1.. maxnoofTRPInfoTypes)) OF TRPInformationTypeResponseItem 

TRPInformationTypeResponseItem ::= CHOICE {
	pCI-NR								NRPCI,
	nG-RAN-CGI							NRCGI,
	nRARFCN								INTEGER (0..maxNRARFCN),
	pRSConfiguration					PRSConfiguration,
	sSBinformation						SSBInformation,
	sFNInitialisationTime				RelativeTime1900,
	spatialDirectionInformation			SpatialDirectionInformation,
	geographicalCoordinates				GeographicalCoordinates,
	choice-extension					ProtocolIE-SingleContainer { { TRPInformationTypeResponseItem-ExtIEs} }
}

TRPInformationTypeResponseItem-ExtIEs F1AP-PROTOCOL-IES ::= {
	{ ID id-TRPType		CRITICALITY reject TYPE TRPType		PRESENCE mandatory },
	...
}


TRPList ::= SEQUENCE (SIZE(1.. maxnoofTRPs)) OF TRPListItem

TRPListItem ::= SEQUENCE {
	tRPID							TRPID,
	iE-Extensions					ProtocolExtensionContainer { { TRPListItem-ExtIEs } }	OPTIONAL
}

TRPListItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= { 
	...
}

TRPMeasurementQuality ::= SEQUENCE {
	tRPmeasurementQuality-Item 	TRPMeasurementQuality-Item,
	iE-Extensions				ProtocolExtensionContainer { {TRPMeasurementQuality-ExtIEs} } OPTIONAL
}

TRPMeasurementQuality-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TRPMeasurementQuality-Item ::= CHOICE {
	timingMeasurementQuality	TimingMeasurementQuality,
	angleMeasurementQuality		AngleMeasurementQuality,
	choice-extension			ProtocolIE-SingleContainer { { TRPMeasurementQuality-Item-ExtIEs } }
}

TRPMeasurementQuality-Item-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TRP-MeasurementRequestList ::= SEQUENCE (SIZE (1..maxNoOfMeasTRPs)) OF TRP-MeasurementRequestItem

TRP-MeasurementRequestItem ::= SEQUENCE {
	tRPID							TRPID, 
	search-window-information		Search-window-information	OPTIONAL, 
	iE-extensions		ProtocolExtensionContainer { { TRP-MeasurementRequestItem-ExtIEs } } OPTIONAL
}

TRP-MeasurementRequestItem-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-NRCGI	CRITICALITY ignore EXTENSION NRCGI		PRESENCE optional },
	...
}

TRPPositionDefinitionType ::= CHOICE {
	direct		TRPPositionDirect,
	referenced	TRPPositionReferenced,
	choice-extension							ProtocolIE-SingleContainer { { TRPPositionDefinitionType-ExtIEs } }
}

TRPPositionDefinitionType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TRPPositionDirect ::= SEQUENCE {
	accuracy	TRPPositionDirectAccuracy,
	iE-extensions		ProtocolExtensionContainer { { TRPPositionDirect-ExtIEs } }	OPTIONAL
}

TRPPositionDirect-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TRPPositionDirectAccuracy ::= CHOICE {
	tRPPosition				AccessPointPosition,
	tRPHAposition			NGRANHighAccuracyAccessPointPosition,
	choice-extension		ProtocolIE-SingleContainer { { TRPPositionDirectAccuracy-ExtIEs } }
}

TRPPositionDirectAccuracy-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TRPPositionReferenced ::= SEQUENCE {
	referencePoint					ReferencePoint,
	referencePointType				TRPReferencePointType,
	iE-extensions					ProtocolExtensionContainer { { TRPPositionReferenced-ExtIEs } } 	OPTIONAL
}

TRPPositionReferenced-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TRPReferencePointType ::= CHOICE {
	tRPPositionRelativeGeodetic			RelativeGeodeticLocation,
	tRPPositionRelativeCartesian		RelativeCartesianLocation,
	choice-extension					ProtocolIE-SingleContainer { { TRPReferencePointType-ExtIEs } }
}

TRPReferencePointType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

TypeOfError ::= ENUMERATED {
	not-understood,
	missing,
	...
}

Transport-Layer-Address-Info ::= SEQUENCE {
	transport-UP-Layer-Address-Info-To-Add-List		Transport-UP-Layer-Address-Info-To-Add-List							OPTIONAL,
	transport-UP-Layer-Address-Info-To-Remove-List	Transport-UP-Layer-Address-Info-To-Remove-List					OPTIONAL,
	iE-Extensions	ProtocolExtensionContainer { { Transport-Layer-Address-Info-ExtIEs } }								OPTIONAL
}

Transport-Layer-Address-Info-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TRPType ::= ENUMERATED {
	prsOnlyTP, 
	srsOnlyRP,
	tp,
	rp,
	trp,
	...
}

TSCAssistanceInformation ::= SEQUENCE {
	periodicity				Periodicity,
	burstArrivalTime		BurstArrivalTime													OPTIONAL,
	iE-Extensions			ProtocolExtensionContainer { {TSCAssistanceInformation-ExtIEs} }	OPTIONAL,
	...
}

TSCAssistanceInformation-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

TSCTrafficCharacteristics ::= SEQUENCE {
	tSCAssistanceInformationDL		TSCAssistanceInformation								OPTIONAL,
	tSCAssistanceInformationUL		TSCAssistanceInformation								OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { {TSCTrafficCharacteristics-ExtIEs} }	OPTIONAL,
	...
}

TSCTrafficCharacteristics-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

-- U
UAC-Assistance-Info ::= SEQUENCE {
	uACPLMN-List		UACPLMN-List,
	iE-Extensions		ProtocolExtensionContainer { { UAC-Assistance-InfoExtIEs} } OPTIONAL
}

UAC-Assistance-InfoExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UACPLMN-List ::= SEQUENCE (SIZE(1..maxnoofUACPLMNs)) OF UACPLMN-Item

UACPLMN-Item::= SEQUENCE {
	pLMNIdentity				PLMN-Identity,
	uACType-List				UACType-List,	iE-Extensions		ProtocolExtensionContainer { { UACPLMN-Item-ExtIEs} } OPTIONAL
}

UACPLMN-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-NID	CRITICALITY ignore	EXTENSION NID	PRESENCE optional },
	...
}

UACType-List ::= SEQUENCE (SIZE(1..maxnoofUACperPLMN)) OF UACType-Item

UACType-Item::= SEQUENCE {
	uACReductionIndication 		UACReductionIndication,
	uACCategoryType				UACCategoryType,
	iE-Extensions		ProtocolExtensionContainer { { UACType-Item-ExtIEs } } OPTIONAL
}

UACType-Item-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UACCategoryType ::= CHOICE {
	uACstandardized				UACAction,
	uACOperatorDefined			UACOperatorDefined, 
	choice-extension			ProtocolIE-SingleContainer { { UACCategoryType-ExtIEs } }
}

UACCategoryType-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

UACOperatorDefined ::= SEQUENCE {
	accessCategory					INTEGER (32..63,...),
	accessIdentity					BIT STRING (SIZE(7)),
	iE-Extensions		ProtocolExtensionContainer { { UACOperatorDefined-ExtIEs} } OPTIONAL
}

UACOperatorDefined-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}


UACAction ::= ENUMERATED {
	reject-non-emergency-mo-dt,
	reject-rrc-cr-signalling,
	permit-emergency-sessions-and-mobile-terminated-services-only,
	permit-high-priority-sessions-and-mobile-terminated-services-only,
	...
}

UACReductionIndication ::= INTEGER (0..100)


UE-associatedLogicalF1-ConnectionItem ::= SEQUENCE {
	gNB-CU-UE-F1AP-ID		GNB-CU-UE-F1AP-ID	 OPTIONAL,
	gNB-DU-UE-F1AP-ID		GNB-DU-UE-F1AP-ID	 OPTIONAL,
	iE-Extensions		ProtocolExtensionContainer { { UE-associatedLogicalF1-ConnectionItemExtIEs} } OPTIONAL,
	...
}

UEAssistanceInformation ::= OCTET STRING

UEAssistanceInformationEUTRA ::= OCTET STRING

UE-associatedLogicalF1-ConnectionItemExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UE-CapabilityRAT-ContainerList::= OCTET STRING

UEContextNotRetrievable ::= ENUMERATED {true, ...}

UEIdentityIndexValue ::= CHOICE {
	indexLength10			BIT STRING (SIZE (10)),
	choice-extension		ProtocolIE-SingleContainer { {UEIdentityIndexValueChoice-ExtIEs} }	
}

UEIdentityIndexValueChoice-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

UL-AoA ::= SEQUENCE {
	azimuthAoA					INTEGER (0..3599),
	zenithAoA					INTEGER (0..1799)	OPTIONAL,
	lCS-to-GCS-TranslationAoA	LCS-to-GCS-TranslationAoA		OPTIONAL,
	iE-extensions			ProtocolExtensionContainer { { UL-AoA-ExtIEs } }	OPTIONAL,
	...
}

UL-AoA-ExtIEs F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UL-BH-Non-UP-Traffic-Mapping ::= SEQUENCE {
	uL-BH-Non-UP-Traffic-Mapping-List			UL-BH-Non-UP-Traffic-Mapping-List,
	iE-Extensions	ProtocolExtensionContainer { { UL-BH-Non-UP-Traffic-Mapping-ExtIEs } } OPTIONAL
}

UL-BH-Non-UP-Traffic-Mapping-ExtIEs	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UL-BH-Non-UP-Traffic-Mapping-List ::= SEQUENCE (SIZE(1..maxnoofNonUPTrafficMappings)) OF UL-BH-Non-UP-Traffic-Mapping-Item

UL-BH-Non-UP-Traffic-Mapping-Item ::= SEQUENCE {
	nonUPTrafficType				NonUPTrafficType,
	bHInfo						BHInfo,
	iE-Extensions					ProtocolExtensionContainer { { UL-BH-Non-UP-Traffic-Mapping-ItemExtIEs } }	OPTIONAL
}

UL-BH-Non-UP-Traffic-Mapping-ItemExtIEs F1AP-PROTOCOL-EXTENSION ::= { 
	...
}

ULConfiguration ::= SEQUENCE	{
	uLUEConfiguration		ULUEConfiguration,
	iE-Extensions	ProtocolExtensionContainer { { ULConfigurationExtIEs } }	OPTIONAL,
	...
}
ULConfigurationExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UL-RTOA-Measurement ::= SEQUENCE {
	uL-RTOA-MeasurementItem		UL-RTOA-MeasurementItem,
	additionalPath-List			AdditionalPath-List OPTIONAL,
	iE-Extensions				ProtocolExtensionContainer { { UL-RTOA-Measurement-ExtIEs } }	OPTIONAL
}

UL-RTOA-Measurement-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UL-RTOA-MeasurementItem ::= CHOICE {
	k0					INTEGER (0..1970049),
	k1					INTEGER (0..985025),
	k2					INTEGER (0..492513),
	k3					INTEGER (0..246257),
	k4					INTEGER (0..123129),
	k5					INTEGER (0..61565),	 
	choice-extension			ProtocolIE-SingleContainer { { UL-RTOA-MeasurementItem-ExtIEs } }
}

UL-RTOA-MeasurementItem-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

UL-SRS-RSRP ::= INTEGER (0..126)

ULUEConfiguration ::= ENUMERATED {no-data, shared, only, ...}

UL-UP-TNL-Information-to-Update-List-Item	::= SEQUENCE {
	uLUPTNLInformation		UPTransportLayerInformation,
	newULUPTNLInformation	UPTransportLayerInformation		OPTIONAL,
	bHInfo	BHInfo,
	iE-Extensions	ProtocolExtensionContainer { { UL-UP-TNL-Information-to-Update-List-ItemExtIEs } }	OPTIONAL,
	...
}

UL-UP-TNL-Information-to-Update-List-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

UL-UP-TNL-Address-to-Update-List-Item	::= SEQUENCE {
	oldIPAdress						TransportLayerAddress,
	newIPAdress						TransportLayerAddress,
	iE-Extensions	ProtocolExtensionContainer { { UL-UP-TNL-Address-to-Update-List-ItemExtIEs } }	OPTIONAL,
	...
}

UL-UP-TNL-Address-to-Update-List-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

ULUPTNLInformation-ToBeSetup-List ::= SEQUENCE (SIZE(1..maxnoofULUPTNLInformation)) OF ULUPTNLInformation-ToBeSetup-Item

ULUPTNLInformation-ToBeSetup-Item ::=SEQUENCE {
	uLUPTNLInformation		UPTransportLayerInformation, 
	iE-Extensions	ProtocolExtensionContainer { { ULUPTNLInformation-ToBeSetup-ItemExtIEs } }	OPTIONAL,
	...
}

ULUPTNLInformation-ToBeSetup-ItemExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	{ ID id-BHInfo		CRITICALITY ignore	EXTENSION BHInfo		PRESENCE optional	},
	...
}

Uncertainty ::= INTEGER (0..32767, ...)

UplinkChannelBW-PerSCS-List ::= SEQUENCE (SIZE (1..maxnoSCSs)) OF SCS-SpecificCarrier

UplinkTxDirectCurrentListInformation ::= OCTET STRING

UPTransportLayerInformation		::= CHOICE {
	gTPTunnel		GTPTunnel,
	choice-extension			ProtocolIE-SingleContainer { { UPTransportLayerInformation-ExtIEs} }
}

UPTransportLayerInformation-ExtIEs F1AP-PROTOCOL-IES ::= {
	...
}

URI-address ::= VisibleString

-- V

VictimgNBSetID ::= SEQUENCE {
	victimgNBSetID		GNBSetID,
	iE-Extensions	ProtocolExtensionContainer { { VictimgNBSetID-ExtIEs } }		OPTIONAL
}

VictimgNBSetID-ExtIEs 	F1AP-PROTOCOL-EXTENSION ::= {
	...
}

VehicleUE ::= ENUMERATED { 
	authorized,
	not-authorized,
	...
}

PedestrianUE ::= ENUMERATED { 
	authorized,
	not-authorized,
	...
}

-- W

-- X

-- Y

-- Z

END
-- ASN1STOP 

9.4.6	Common Definitions
-- ASN1START 
-- **************************************************************
--
-- Common definitions
--
-- **************************************************************

F1AP-CommonDataTypes {
itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) 
ngran-access (22) modules (3) f1ap (3) version1 (1) f1ap-CommonDataTypes (3) }

DEFINITIONS AUTOMATIC TAGS ::= 

BEGIN

Criticality		::= ENUMERATED { reject, ignore, notify }

Presence		::= ENUMERATED { optional, conditional, mandatory }

PrivateIE-ID	::= CHOICE {
	local				INTEGER (0..65535),
	global				OBJECT IDENTIFIER
}

ProcedureCode		::= INTEGER (0..255)

ProtocolExtensionID	::= INTEGER (0..65535)

ProtocolIE-ID		::= INTEGER (0..65535)

TriggeringMessage	::= ENUMERATED { initiating-message, successful-outcome, unsuccessful-outcome }

END
-- ASN1STOP 

9.4.7	Constant Definitions
-- ASN1START 
-- **************************************************************
--
-- Constant definitions
--
-- **************************************************************

F1AP-Constants { 
itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) 
ngran-access (22) modules (3) f1ap (3) version1 (1) f1ap-Constants (4) } 

DEFINITIONS AUTOMATIC TAGS ::= 

BEGIN

-- **************************************************************
--
-- IE parameter types from other modules.
--
-- **************************************************************

IMPORTS
	ProcedureCode,
	ProtocolIE-ID

FROM F1AP-CommonDataTypes;


-- **************************************************************
--
-- Elementary Procedures
--
-- **************************************************************

id-Reset									ProcedureCode ::= 0
id-F1Setup									ProcedureCode ::= 1
id-ErrorIndication							ProcedureCode ::= 2
id-gNBDUConfigurationUpdate					ProcedureCode ::= 3
id-gNBCUConfigurationUpdate					ProcedureCode ::= 4
id-UEContextSetup							ProcedureCode ::= 5
id-UEContextRelease							ProcedureCode ::= 6
id-UEContextModification					ProcedureCode ::= 7
id-UEContextModificationRequired			ProcedureCode ::= 8
id-UEMobilityCommand						ProcedureCode ::= 9
id-UEContextReleaseRequest					ProcedureCode ::= 10
id-InitialULRRCMessageTransfer				ProcedureCode ::= 11
id-DLRRCMessageTransfer						ProcedureCode ::= 12
id-ULRRCMessageTransfer						ProcedureCode ::= 13
id-privateMessage							ProcedureCode ::= 14
id-UEInactivityNotification					ProcedureCode ::= 15
id-GNBDUResourceCoordination				ProcedureCode ::= 16
id-SystemInformationDeliveryCommand			ProcedureCode ::= 17
id-Paging									ProcedureCode ::= 18
id-Notify									ProcedureCode ::= 19
id-WriteReplaceWarning						ProcedureCode ::= 20
id-PWSCancel								ProcedureCode ::= 21
id-PWSRestartIndication						ProcedureCode ::= 22
id-PWSFailureIndication						ProcedureCode ::= 23
id-GNBDUStatusIndication 					ProcedureCode ::= 24
id-RRCDeliveryReport		 				ProcedureCode ::= 25
id-F1Removal								ProcedureCode ::= 26
id-NetworkAccessRateReduction				ProcedureCode ::= 27
id-TraceStart								ProcedureCode ::= 28
id-DeactivateTrace							ProcedureCode ::= 29
id-DUCURadioInformationTransfer				ProcedureCode ::= 30
id-CUDURadioInformationTransfer				ProcedureCode ::= 31
id-BAPMappingConfiguration					ProcedureCode ::= 32
id-GNBDUResourceConfiguration				ProcedureCode ::= 33
id-IABTNLAddressAllocation					ProcedureCode ::= 34
id-IABUPConfigurationUpdate					ProcedureCode ::= 35
id-resourceStatusReportingInitiation		ProcedureCode ::= 36
id-resourceStatusReporting					ProcedureCode ::= 37
id-accessAndMobilityIndication				ProcedureCode ::= 38
id-accessSuccess							ProcedureCode ::= 39
id-cellTrafficTrace 							ProcedureCode ::= 40 
id-PositioningMeasurementExchange			ProcedureCode ::= 41
id-PositioningAssistanceInformationControl	ProcedureCode ::= 42
id-PositioningAssistanceInformationFeedback	ProcedureCode ::= 43
id-PositioningMeasurementReport				ProcedureCode ::= 44
id-PositioningMeasurementAbort				ProcedureCode ::= 45
id-PositioningMeasurementFailureIndication	ProcedureCode ::= 46
id-PositioningMeasurementUpdate				ProcedureCode ::= 47
id-TRPInformationExchange					ProcedureCode ::= 48
id-PositioningInformationExchange			ProcedureCode ::= 49
id-PositioningActivation					ProcedureCode ::= 50
id-PositioningDeactivation					ProcedureCode ::= 51
id-E-CIDMeasurementInitiation				ProcedureCode ::= 52
id-E-CIDMeasurementFailureIndication		ProcedureCode ::= 53
id-E-CIDMeasurementReport					ProcedureCode ::= 54
id-E-CIDMeasurementTermination				ProcedureCode ::= 55
id-PositioningInformationUpdate				ProcedureCode ::= 56
id-ReferenceTimeInformationReport			ProcedureCode ::= 57
id-ReferenceTimeInformationReportingControl	ProcedureCode ::= 58



-- **************************************************************
--
-- Extension constants
--
-- **************************************************************

maxPrivateIEs							INTEGER ::= 65535
maxProtocolExtensions					INTEGER ::= 65535
maxProtocolIEs							INTEGER ::= 65535
-- **************************************************************
--
-- Lists
--
-- **************************************************************

maxNRARFCN								INTEGER ::= 3279165
maxnoofErrors							INTEGER ::= 256
maxnoofIndividualF1ConnectionsToReset	INTEGER ::= 65536
maxCellingNBDU							INTEGER ::= 512
maxnoofSCells							INTEGER ::= 32
maxnoofSRBs								INTEGER ::= 8
maxnoofDRBs								INTEGER ::= 64
maxnoofULUPTNLInformation				INTEGER ::= 2
maxnoofDLUPTNLInformation				INTEGER ::= 2
maxnoofBPLMNs							INTEGER ::= 6
maxnoofCandidateSpCells					INTEGER ::= 64
maxnoofPotentialSpCells					INTEGER ::= 64
maxnoofNrCellBands						INTEGER ::= 32
maxnoofSIBTypes							INTEGER ::= 32
maxnoofSITypes							INTEGER ::= 32
maxnoofPagingCells						INTEGER ::= 512
maxnoofTNLAssociations					INTEGER ::= 32
maxnoofQoSFlows							INTEGER ::= 64
maxnoofSliceItems						INTEGER ::= 1024
maxCellineNB							INTEGER ::= 256
maxnoofExtendedBPLMNs					INTEGER ::= 6
maxnoofUEIDs							INTEGER ::= 65536
maxnoofBPLMNsNR							INTEGER ::= 12
maxnoofUACPLMNs							INTEGER ::= 12
maxnoofUACperPLMN						INTEGER ::= 64
maxnoofAdditionalSIBs					INTEGER ::= 63
maxnoofslots							INTEGER ::= 5120
maxnoofTLAs								INTEGER ::=	16
maxnoofGTPTLAs							INTEGER ::=	16
maxnoofBHRLCChannels					INTEGER ::= 65536
maxnoofRoutingEntries					INTEGER ::= 1024
maxnoofIABSTCInfo						INTEGER ::= 45
maxnoofSymbols							INTEGER ::= 14
maxnoofServingCells						INTEGER ::= 32
maxnoofDUFSlots							INTEGER ::= 320
maxnoofHSNASlots						INTEGER ::= 5120
maxnoofServedCellsIAB					INTEGER ::= 512 
maxnoofChildIABNodes					INTEGER ::= 1024
maxnoofNonUPTrafficMappings				INTEGER ::= 32
maxnoofTLAsIAB							INTEGER ::= 1024
maxnoofMappingEntries					INTEGER ::= 67108864
maxnoofDSInfo							INTEGER ::= 64
maxnoofEgressLinks						INTEGER ::= 2
maxnoofULUPTNLInformationforIAB			INTEGER ::= 32678
maxnoofUPTNLAddresses					INTEGER ::= 8
maxnoofSLDRBs							INTEGER ::= 512
maxnoofQoSParaSets						INTEGER ::= 8
maxnoofPC5QoSFlows						INTEGER ::= 2048
maxnoofSSBAreas							INTEGER ::=	64
maxnoofPhysicalResourceBlocks			INTEGER ::= 275
maxnoofPhysicalResourceBlocks-1			INTEGER ::= 274
maxnoofPRACHconfigs						INTEGER ::= 16
maxnoofRACHReports						INTEGER ::= 64
maxnoofRLFReports						INTEGER ::= 64
maxnoofAdditionalPDCPDuplicationTNL		INTEGER ::=	2
maxnoofRLCDuplicationState				INTEGER ::=	3
maxnoofCHOcells							INTEGER ::= 8
maxnoofMDTPLMNs							INTEGER ::=	16
maxnoofCAGsupported						INTEGER ::= 12
maxnoofNIDsupported						INTEGER ::= 12
maxnoofNRSCSs							INTEGER ::= 5
maxnoofExtSliceItems					INTEGER ::= 65535 
maxnoofPosMeas							INTEGER ::=	16384
maxnoofTRPInfoTypes						INTEGER ::=	64 
maxnoofTRPs								INTEGER ::=	65535 
maxnoofSRSTriggerStates					INTEGER ::= 3
maxnoofSpatialRelations					INTEGER ::= 64
maxnoBcastCell							INTEGER ::= 16384
maxnoofAngleInfo						INTEGER ::= 65535
maxnooflcs-gcs-translation				INTEGER ::= 3
maxnoofPath								INTEGER ::= 2
maxnoofMeasE-CID						INTEGER ::= 64
maxnoofSSBs								INTEGER ::= 255
maxnoSRS-ResourceSets					INTEGER ::= 16
maxnoSRS-ResourcePerSet					INTEGER ::= 16
maxnoSRS-Carriers						INTEGER ::= 32
maxnoSCSs								INTEGER ::= 5
maxnoSRS-Resources						INTEGER ::= 64
maxnoSRS-PosResources					INTEGER ::= 64
maxnoSRS-PosResourceSets				INTEGER ::= 16
maxnoSRS-PosResourcePerSet				INTEGER ::= 16
maxnoofPRS-ResourceSets					INTEGER ::= 2
maxnoofPRS-ResourcesPerSet				INTEGER ::= 64
maxNoOfMeasTRPs							INTEGER ::= 64
maxnoofPRSresourceSets					INTEGER ::= 8
maxnoofPRSresources						INTEGER ::= 64



-- **************************************************************
--
-- IEs
--
-- **************************************************************

id-Cause											ProtocolIE-ID ::= 0
id-Cells-Failed-to-be-Activated-List				ProtocolIE-ID ::= 1
id-Cells-Failed-to-be-Activated-List-Item			ProtocolIE-ID ::= 2
id-Cells-to-be-Activated-List						ProtocolIE-ID ::= 3
id-Cells-to-be-Activated-List-Item					ProtocolIE-ID ::= 4
id-Cells-to-be-Deactivated-List						ProtocolIE-ID ::= 5
id-Cells-to-be-Deactivated-List-Item				ProtocolIE-ID ::= 6
id-CriticalityDiagnostics							ProtocolIE-ID ::= 7
id-CUtoDURRCInformation								ProtocolIE-ID ::= 9
id-DRBs-FailedToBeModified-Item						ProtocolIE-ID ::= 12
id-DRBs-FailedToBeModified-List						ProtocolIE-ID ::= 13
id-DRBs-FailedToBeSetup-Item						ProtocolIE-ID ::= 14
id-DRBs-FailedToBeSetup-List						ProtocolIE-ID ::= 15
id-DRBs-FailedToBeSetupMod-Item						ProtocolIE-ID ::= 16
id-DRBs-FailedToBeSetupMod-List						ProtocolIE-ID ::= 17
id-DRBs-ModifiedConf-Item							ProtocolIE-ID ::= 18
id-DRBs-ModifiedConf-List							ProtocolIE-ID ::= 19
id-DRBs-Modified-Item								ProtocolIE-ID ::= 20
id-DRBs-Modified-List								ProtocolIE-ID ::= 21
id-DRBs-Required-ToBeModified-Item					ProtocolIE-ID ::= 22
id-DRBs-Required-ToBeModified-List					ProtocolIE-ID ::= 23
id-DRBs-Required-ToBeReleased-Item					ProtocolIE-ID ::= 24
id-DRBs-Required-ToBeReleased-List					ProtocolIE-ID ::= 25
id-DRBs-Setup-Item									ProtocolIE-ID ::= 26
id-DRBs-Setup-List									ProtocolIE-ID ::= 27
id-DRBs-SetupMod-Item								ProtocolIE-ID ::= 28
id-DRBs-SetupMod-List								ProtocolIE-ID ::= 29
id-DRBs-ToBeModified-Item							ProtocolIE-ID ::= 30
id-DRBs-ToBeModified-List							ProtocolIE-ID ::= 31
id-DRBs-ToBeReleased-Item							ProtocolIE-ID ::= 32
id-DRBs-ToBeReleased-List							ProtocolIE-ID ::= 33
id-DRBs-ToBeSetup-Item								ProtocolIE-ID ::= 34
id-DRBs-ToBeSetup-List								ProtocolIE-ID ::= 35
id-DRBs-ToBeSetupMod-Item							ProtocolIE-ID ::= 36
id-DRBs-ToBeSetupMod-List							ProtocolIE-ID ::= 37
id-DRXCycle											ProtocolIE-ID ::= 38
id-DUtoCURRCInformation								ProtocolIE-ID ::= 39
id-gNB-CU-UE-F1AP-ID								ProtocolIE-ID ::= 40
id-gNB-DU-UE-F1AP-ID								ProtocolIE-ID ::= 41
id-gNB-DU-ID										ProtocolIE-ID ::= 42
id-GNB-DU-Served-Cells-Item							ProtocolIE-ID ::= 43
id-gNB-DU-Served-Cells-List							ProtocolIE-ID ::= 44
id-gNB-DU-Name										ProtocolIE-ID ::= 45
id-NRCellID											ProtocolIE-ID ::= 46
id-oldgNB-DU-UE-F1AP-ID								ProtocolIE-ID ::= 47
id-ResetType										ProtocolIE-ID ::= 48
id-ResourceCoordinationTransferContainer			ProtocolIE-ID ::= 49
id-RRCContainer										ProtocolIE-ID ::= 50
id-SCell-ToBeRemoved-Item							ProtocolIE-ID ::= 51
id-SCell-ToBeRemoved-List							ProtocolIE-ID ::= 52
id-SCell-ToBeSetup-Item								ProtocolIE-ID ::= 53
id-SCell-ToBeSetup-List								ProtocolIE-ID ::= 54
id-SCell-ToBeSetupMod-Item							ProtocolIE-ID ::= 55
id-SCell-ToBeSetupMod-List							ProtocolIE-ID ::= 56
id-Served-Cells-To-Add-Item							ProtocolIE-ID ::= 57
id-Served-Cells-To-Add-List							ProtocolIE-ID ::= 58
id-Served-Cells-To-Delete-Item						ProtocolIE-ID ::= 59
id-Served-Cells-To-Delete-List						ProtocolIE-ID ::= 60
id-Served-Cells-To-Modify-Item						ProtocolIE-ID ::= 61
id-Served-Cells-To-Modify-List						ProtocolIE-ID ::= 62
id-SpCell-ID										ProtocolIE-ID ::= 63
id-SRBID											ProtocolIE-ID ::= 64
id-SRBs-FailedToBeSetup-Item						ProtocolIE-ID ::= 65
id-SRBs-FailedToBeSetup-List						ProtocolIE-ID ::= 66
id-SRBs-FailedToBeSetupMod-Item						ProtocolIE-ID ::= 67
id-SRBs-FailedToBeSetupMod-List						ProtocolIE-ID ::= 68
id-SRBs-Required-ToBeReleased-Item					ProtocolIE-ID ::= 69
id-SRBs-Required-ToBeReleased-List					ProtocolIE-ID ::= 70
id-SRBs-ToBeReleased-Item							ProtocolIE-ID ::= 71
id-SRBs-ToBeReleased-List							ProtocolIE-ID ::= 72
id-SRBs-ToBeSetup-Item								ProtocolIE-ID ::= 73
id-SRBs-ToBeSetup-List								ProtocolIE-ID ::= 74
id-SRBs-ToBeSetupMod-Item							ProtocolIE-ID ::= 75
id-SRBs-ToBeSetupMod-List							ProtocolIE-ID ::= 76
id-TimeToWait										ProtocolIE-ID ::= 77
id-TransactionID									ProtocolIE-ID ::= 78
id-TransmissionActionIndicator						ProtocolIE-ID ::= 79
id-UE-associatedLogicalF1-ConnectionItem 			ProtocolIE-ID ::= 80
id-UE-associatedLogicalF1-ConnectionListResAck		ProtocolIE-ID ::= 81
id-gNB-CU-Name										ProtocolIE-ID ::= 82
id-SCell-FailedtoSetup-List							ProtocolIE-ID ::= 83
id-SCell-FailedtoSetup-Item							ProtocolIE-ID ::= 84
id-SCell-FailedtoSetupMod-List						ProtocolIE-ID ::= 85
id-SCell-FailedtoSetupMod-Item						ProtocolIE-ID ::= 86
id-RRCReconfigurationCompleteIndicator 				ProtocolIE-ID ::= 87
id-Cells-Status-Item								ProtocolIE-ID ::= 88
id-Cells-Status-List								ProtocolIE-ID ::= 89
id-Candidate-SpCell-List							ProtocolIE-ID ::= 90
id-Candidate-SpCell-Item							ProtocolIE-ID ::= 91
id-Potential-SpCell-List							ProtocolIE-ID ::= 92
id-Potential-SpCell-Item							ProtocolIE-ID ::= 93
id-FullConfiguration								ProtocolIE-ID ::= 94
id-C-RNTI											ProtocolIE-ID ::= 95
id-SpCellULConfigured								ProtocolIE-ID ::= 96
id-InactivityMonitoringRequest						ProtocolIE-ID ::= 97
id-InactivityMonitoringResponse						ProtocolIE-ID ::= 98
id-DRB-Activity-Item								ProtocolIE-ID ::= 99
id-DRB-Activity-List								ProtocolIE-ID ::= 100
id-EUTRA-NR-CellResourceCoordinationReq-Container	ProtocolIE-ID ::= 101
id-EUTRA-NR-CellResourceCoordinationReqAck-Container	ProtocolIE-ID ::= 102
id-Protected-EUTRA-Resources-List					ProtocolIE-ID ::= 105
id-RequestType 										ProtocolIE-ID ::= 106
id-ServCellIndex									ProtocolIE-ID ::= 107 
id-RAT-FrequencyPriorityInformation					ProtocolIE-ID ::= 108
id-ExecuteDuplication								ProtocolIE-ID ::= 109
id-NRCGI											ProtocolIE-ID ::= 111
id-PagingCell-Item									ProtocolIE-ID ::= 112
id-PagingCell-List									ProtocolIE-ID ::= 113
id-PagingDRX										ProtocolIE-ID ::= 114
id-PagingPriority 									ProtocolIE-ID ::= 115
id-SItype-List										ProtocolIE-ID ::= 116
id-UEIdentityIndexValue								ProtocolIE-ID ::= 117
id-gNB-CUSystemInformation							ProtocolIE-ID ::= 118
id-HandoverPreparationInformation					ProtocolIE-ID ::= 119
id-GNB-CU-TNL-Association-To-Add-Item				ProtocolIE-ID ::= 120
id-GNB-CU-TNL-Association-To-Add-List				ProtocolIE-ID ::= 121
id-GNB-CU-TNL-Association-To-Remove-Item			ProtocolIE-ID ::= 122
id-GNB-CU-TNL-Association-To-Remove-List			ProtocolIE-ID ::= 123
id-GNB-CU-TNL-Association-To-Update-Item			ProtocolIE-ID ::= 124
id-GNB-CU-TNL-Association-To-Update-List			ProtocolIE-ID ::= 125
id-MaskedIMEISV										ProtocolIE-ID ::= 126
id-PagingIdentity									ProtocolIE-ID ::= 127
id-DUtoCURRCContainer								ProtocolIE-ID ::= 128
id-Cells-to-be-Barred-List							ProtocolIE-ID ::= 129
id-Cells-to-be-Barred-Item							ProtocolIE-ID ::= 130
id-TAISliceSupportList								ProtocolIE-ID ::= 131
id-GNB-CU-TNL-Association-Setup-List				ProtocolIE-ID ::= 132
id-GNB-CU-TNL-Association-Setup-Item				ProtocolIE-ID ::= 133
id-GNB-CU-TNL-Association-Failed-To-Setup-List		ProtocolIE-ID ::= 134
id-GNB-CU-TNL-Association-Failed-To-Setup-Item		ProtocolIE-ID ::= 135
id-DRB-Notify-Item									ProtocolIE-ID ::= 136
id-DRB-Notify-List									ProtocolIE-ID ::= 137
id-NotficationControl								ProtocolIE-ID ::= 138
id-RANAC											ProtocolIE-ID ::= 139
id-PWSSystemInformation								ProtocolIE-ID ::= 140
id-RepetitionPeriod									ProtocolIE-ID ::= 141
id-NumberofBroadcastRequest							ProtocolIE-ID ::= 142
id-Cells-To-Be-Broadcast-List						ProtocolIE-ID ::= 144
id-Cells-To-Be-Broadcast-Item						ProtocolIE-ID ::= 145
id-Cells-Broadcast-Completed-List 					ProtocolIE-ID ::= 146
id-Cells-Broadcast-Completed-Item 					ProtocolIE-ID ::= 147
id-Broadcast-To-Be-Cancelled-List 					ProtocolIE-ID ::= 148
id-Broadcast-To-Be-Cancelled-Item 					ProtocolIE-ID ::= 149
id-Cells-Broadcast-Cancelled-List 					ProtocolIE-ID ::= 150
id-Cells-Broadcast-Cancelled-Item 					ProtocolIE-ID ::= 151
id-NR-CGI-List-For-Restart-List 						ProtocolIE-ID ::= 152
id-NR-CGI-List-For-Restart-Item 						ProtocolIE-ID ::= 153
id-PWS-Failed-NR-CGI-List 							ProtocolIE-ID ::= 154
id-PWS-Failed-NR-CGI-Item 							ProtocolIE-ID ::= 155
id-ConfirmedUEID									ProtocolIE-ID ::= 156
id-Cancel-all-Warning-Messages-Indicator			ProtocolIE-ID ::= 157
id-GNB-DU-UE-AMBR-UL								ProtocolIE-ID ::= 158
id-DRXConfigurationIndicator						ProtocolIE-ID ::= 159
id-RLC-Status										ProtocolIE-ID ::= 160
id-DLPDCPSNLength									ProtocolIE-ID ::= 161
id-GNB-DUConfigurationQuery							ProtocolIE-ID ::= 162
id-MeasurementTimingConfiguration					ProtocolIE-ID ::= 163
id-DRB-Information									ProtocolIE-ID ::= 164
id-ServingPLMN										ProtocolIE-ID ::= 165
id-Protected-EUTRA-Resources-Item					ProtocolIE-ID ::= 168
id-GNB-CU-RRC-Version								ProtocolIE-ID ::= 170
id-GNB-DU-RRC-Version								ProtocolIE-ID ::= 171
id-GNBDUOverloadInformation							ProtocolIE-ID ::= 172
id-CellGroupConfig									ProtocolIE-ID ::= 173
id-RLCFailureIndication								ProtocolIE-ID ::= 174
id-UplinkTxDirectCurrentListInformation				ProtocolIE-ID ::= 175
id-DC-Based-Duplication-Configured					ProtocolIE-ID ::= 176
id-DC-Based-Duplication-Activation					ProtocolIE-ID ::= 177
id-SULAccessIndication								ProtocolIE-ID ::= 178
id-AvailablePLMNList								ProtocolIE-ID ::= 179
id-PDUSessionID										ProtocolIE-ID ::= 180
id-ULPDUSessionAggregateMaximumBitRate				ProtocolIE-ID ::= 181
id-ServingCellMO									ProtocolIE-ID ::= 182
id-QoSFlowMappingIndication							ProtocolIE-ID ::= 183
id-RRCDeliveryStatusRequest							ProtocolIE-ID ::= 184
id-RRCDeliveryStatus								ProtocolIE-ID ::= 185
id-BearerTypeChange									ProtocolIE-ID ::= 186
id-RLCMode											ProtocolIE-ID ::= 187
id-Duplication-Activation							ProtocolIE-ID ::= 188
id-Dedicated-SIDelivery-NeededUE-List				ProtocolIE-ID ::= 189
id-Dedicated-SIDelivery-NeededUE-Item				ProtocolIE-ID ::= 190
id-DRX-LongCycleStartOffset							ProtocolIE-ID ::= 191
id-ULPDCPSNLength									ProtocolIE-ID ::= 192
id-SelectedBandCombinationIndex						ProtocolIE-ID ::= 193
id-SelectedFeatureSetEntryIndex						ProtocolIE-ID ::= 194
id-ResourceCoordinationTransferInformation			ProtocolIE-ID ::= 195
id-ExtendedServedPLMNs-List							ProtocolIE-ID ::= 196
id-ExtendedAvailablePLMN-List						ProtocolIE-ID ::= 197
id-Associated-SCell-List							ProtocolIE-ID ::= 198
id-latest-RRC-Version-Enhanced						ProtocolIE-ID ::= 199
id-Associated-SCell-Item							ProtocolIE-ID ::= 200
id-Cell-Direction									ProtocolIE-ID ::= 201
id-SRBs-Setup-List									ProtocolIE-ID ::= 202
id-SRBs-Setup-Item									ProtocolIE-ID ::= 203
id-SRBs-SetupMod-List								ProtocolIE-ID ::= 204
id-SRBs-SetupMod-Item								ProtocolIE-ID ::= 205
id-SRBs-Modified-List								ProtocolIE-ID ::= 206
id-SRBs-Modified-Item								ProtocolIE-ID ::= 207
id-Ph-InfoSCG										ProtocolIE-ID ::= 208
id-RequestedBandCombinationIndex					ProtocolIE-ID ::= 209
id-RequestedFeatureSetEntryIndex					ProtocolIE-ID ::= 210
id-RequestedP-MaxFR2								ProtocolIE-ID ::= 211
id-DRX-Config										ProtocolIE-ID ::= 212
id-IgnoreResourceCoordinationContainer				ProtocolIE-ID ::= 213
id-UEAssistanceInformation							ProtocolIE-ID ::= 214
id-NeedforGap										ProtocolIE-ID ::= 215
id-PagingOrigin										ProtocolIE-ID ::= 216
id-new-gNB-CU-UE-F1AP-ID							ProtocolIE-ID ::= 217
id-RedirectedRRCmessage								ProtocolIE-ID ::= 218
id-new-gNB-DU-UE-F1AP-ID							ProtocolIE-ID ::= 219
id-NotificationInformation							ProtocolIE-ID ::= 220
id-PLMNAssistanceInfoForNetShar						ProtocolIE-ID ::= 221
id-UEContextNotRetrievable							ProtocolIE-ID ::= 222
id-BPLMN-ID-Info-List								ProtocolIE-ID ::= 223
id-SelectedPLMNID									ProtocolIE-ID ::= 224
id-UAC-Assistance-Info								ProtocolIE-ID ::= 225
id-RANUEID											ProtocolIE-ID ::= 226
id-GNB-DU-TNL-Association-To-Remove-Item			ProtocolIE-ID ::= 227
id-GNB-DU-TNL-Association-To-Remove-List			ProtocolIE-ID ::= 228
id-TNLAssociationTransportLayerAddressgNBDU			ProtocolIE-ID ::= 229
id-portNumber										ProtocolIE-ID ::= 230
id-AdditionalSIBMessageList							ProtocolIE-ID ::= 231
id-Cell-Type										ProtocolIE-ID ::= 232
id-IgnorePRACHConfiguration							ProtocolIE-ID ::= 233
id-CG-Config										ProtocolIE-ID ::= 234
id-PDCCH-BlindDetectionSCG							ProtocolIE-ID ::= 235
id-Requested-PDCCH-BlindDetectionSCG				ProtocolIE-ID ::= 236
id-Ph-InfoMCG										ProtocolIE-ID ::= 237
id-MeasGapSharingConfig								ProtocolIE-ID ::= 238
id-systemInformationAreaID							ProtocolIE-ID ::= 239
id-areaScope										ProtocolIE-ID ::= 240
id-RRCContainer-RRCSetupComplete					ProtocolIE-ID ::= 241
id-TraceActivation									ProtocolIE-ID ::= 242
id-TraceID											ProtocolIE-ID ::= 243
id-Neighbour-Cell-Information-List					ProtocolIE-ID ::= 244
id-SymbolAllocInSlot								ProtocolIE-ID ::= 246
id-NumDLULSymbols									ProtocolIE-ID ::= 247
id-AdditionalRRMPriorityIndex						ProtocolIE-ID ::= 248
id-DUCURadioInformationType							ProtocolIE-ID ::= 249
id-CUDURadioInformationType 						ProtocolIE-ID ::= 250
id-AggressorgNBSetID								ProtocolIE-ID ::= 251
id-VictimgNBSetID									ProtocolIE-ID ::= 252
id-LowerLayerPresenceStatusChange					ProtocolIE-ID ::= 253
id-Transport-Layer-Address-Info						ProtocolIE-ID ::= 254
id-Neighbour-Cell-Information-Item					ProtocolIE-ID ::= 255
id-IntendedTDD-DL-ULConfig							ProtocolIE-ID ::= 256
id-QosMonitoringRequest								ProtocolIE-ID ::= 257
id-BHChannels-ToBeSetup-List						ProtocolIE-ID ::= 258
id-BHChannels-ToBeSetup-Item						ProtocolIE-ID ::= 259
id-BHChannels-Setup-List							ProtocolIE-ID ::= 260
id-BHChannels-Setup-Item							ProtocolIE-ID ::= 261
id-BHChannels-ToBeModified-Item						ProtocolIE-ID ::= 262
id-BHChannels-ToBeModified-List						ProtocolIE-ID ::= 263
id-BHChannels-ToBeReleased-Item						ProtocolIE-ID ::= 264
id-BHChannels-ToBeReleased-List						ProtocolIE-ID ::= 265
id-BHChannels-ToBeSetupMod-Item						ProtocolIE-ID ::= 266
id-BHChannels-ToBeSetupMod-List						ProtocolIE-ID ::= 267
id-BHChannels-FailedToBeModified-Item				ProtocolIE-ID ::= 268
id-BHChannels-FailedToBeModified-List				ProtocolIE-ID ::= 269
id-BHChannels-FailedToBeSetupMod-Item				ProtocolIE-ID ::= 270
id-BHChannels-FailedToBeSetupMod-List				ProtocolIE-ID ::= 271
id-BHChannels-Modified-Item							ProtocolIE-ID ::= 272
id-BHChannels-Modified-List							ProtocolIE-ID ::= 273
id-BHChannels-SetupMod-Item							ProtocolIE-ID ::= 274
id-BHChannels-SetupMod-List							ProtocolIE-ID ::= 275
id-BHChannels-Required-ToBeReleased-Item			ProtocolIE-ID ::= 276
id-BHChannels-Required-ToBeReleased-List			ProtocolIE-ID ::= 277
id-BHChannels-FailedToBeSetup-Item					ProtocolIE-ID ::= 278
id-BHChannels-FailedToBeSetup-List					ProtocolIE-ID ::= 279
id-BHInfo											ProtocolIE-ID ::= 280
id-BAPAddress										ProtocolIE-ID ::= 281
id-ConfiguredBAPAddress								ProtocolIE-ID ::= 282
id-BH-Routing-Information-Added-List				ProtocolIE-ID ::= 283
id-BH-Routing-Information-Added-List-Item			ProtocolIE-ID ::= 284
id-BH-Routing-Information-Removed-List				ProtocolIE-ID ::= 285
id-BH-Routing-Information-Removed-List-Item			ProtocolIE-ID ::= 286
id-UL-BH-Non-UP-Traffic-Mapping						ProtocolIE-ID ::= 287
id-Activated-Cells-to-be-Updated-List				ProtocolIE-ID ::= 288
id-Child-Nodes-List									ProtocolIE-ID ::= 289
id-IAB-Info-IAB-DU									ProtocolIE-ID ::= 290
id-IAB-Info-IAB-donor-CU							ProtocolIE-ID ::= 291
id-IAB-TNL-Addresses-To-Remove-List					ProtocolIE-ID ::= 292
id-IAB-TNL-Addresses-To-Remove-Item					ProtocolIE-ID ::= 293
id-IAB-Allocated-TNL-Address-List					ProtocolIE-ID ::= 294
id-IAB-Allocated-TNL-Address-Item					ProtocolIE-ID ::= 295
id-IABIPv6RequestType								ProtocolIE-ID ::= 296
id-IABv4AddressesRequested							ProtocolIE-ID ::= 297
id-IAB-Barred										ProtocolIE-ID ::= 298
id-TrafficMappingInformation						ProtocolIE-ID ::= 299
id-UL-UP-TNL-Information-to-Update-List				ProtocolIE-ID ::= 300
id-UL-UP-TNL-Information-to-Update-List-Item		ProtocolIE-ID ::= 301
id-UL-UP-TNL-Address-to-Update-List					ProtocolIE-ID ::= 302
id-UL-UP-TNL-Address-to-Update-List-Item			ProtocolIE-ID ::= 303
id-DL-UP-TNL-Address-to-Update-List					ProtocolIE-ID ::= 304
id-DL-UP-TNL-Address-to-Update-List-Item			ProtocolIE-ID ::= 305
id-NRV2XServicesAuthorized							ProtocolIE-ID ::= 306
id-LTEV2XServicesAuthorized							ProtocolIE-ID ::= 307
id-NRUESidelinkAggregateMaximumBitrate				ProtocolIE-ID ::= 308
id-LTEUESidelinkAggregateMaximumBitrate				ProtocolIE-ID ::= 309
id-SIB12-message									ProtocolIE-ID ::= 310
id-SIB13-message									ProtocolIE-ID ::= 311
id-SIB14-message									ProtocolIE-ID ::= 312
id-SLDRBs-FailedToBeModified-Item					ProtocolIE-ID ::= 313
id-SLDRBs-FailedToBeModified-List					ProtocolIE-ID ::= 314
id-SLDRBs-FailedToBeSetup-Item						ProtocolIE-ID ::= 315
id-SLDRBs-FailedToBeSetup-List						ProtocolIE-ID ::= 316
id-SLDRBs-Modified-Item								ProtocolIE-ID ::= 317
id-SLDRBs-Modified-List								ProtocolIE-ID ::= 318
id-SLDRBs-Required-ToBeModified-Item				ProtocolIE-ID ::= 319
id-SLDRBs-Required-ToBeModified-List				ProtocolIE-ID ::= 320
id-SLDRBs-Required-ToBeReleased-Item				ProtocolIE-ID ::= 321
id-SLDRBs-Required-ToBeReleased-List				ProtocolIE-ID ::= 322
id-SLDRBs-Setup-Item								ProtocolIE-ID ::= 323
id-SLDRBs-Setup-List								ProtocolIE-ID ::= 324
id-SLDRBs-ToBeModified-Item							ProtocolIE-ID ::= 325
id-SLDRBs-ToBeModified-List							ProtocolIE-ID ::= 326
id-SLDRBs-ToBeReleased-Item							ProtocolIE-ID ::= 327
id-SLDRBs-ToBeReleased-List							ProtocolIE-ID ::= 328
id-SLDRBs-ToBeSetup-Item							ProtocolIE-ID ::= 329
id-SLDRBs-ToBeSetup-List							ProtocolIE-ID ::= 330
id-SLDRBs-ToBeSetupMod-Item							ProtocolIE-ID ::= 331
id-SLDRBs-ToBeSetupMod-List							ProtocolIE-ID ::= 332
id-SLDRBs-SetupMod-List								ProtocolIE-ID ::= 333
id-SLDRBs-FailedToBeSetupMod-List					ProtocolIE-ID ::= 334
id-SLDRBs-SetupMod-Item								ProtocolIE-ID ::= 335
id-SLDRBs-FailedToBeSetupMod-Item					ProtocolIE-ID ::= 336
id-SLDRBs-ModifiedConf-List							ProtocolIE-ID ::= 337
id-SLDRBs-ModifiedConf-Item							ProtocolIE-ID ::= 338
id-UEAssistanceInformationEUTRA						ProtocolIE-ID ::= 339
id-PC5LinkAMBR										ProtocolIE-ID ::= 340
id-SL-PHY-MAC-RLC-Config							ProtocolIE-ID ::= 341
id-SL-ConfigDedicatedEUTRA-Info						ProtocolIE-ID ::= 342
id-AlternativeQoSParaSetList						ProtocolIE-ID ::= 343
id-CurrentQoSParaSetIndex							ProtocolIE-ID ::= 344
id-gNBCUMeasurementID								ProtocolIE-ID ::= 345
id-gNBDUMeasurementID								ProtocolIE-ID ::= 346
id-RegistrationRequest								ProtocolIE-ID ::= 347
id-ReportCharacteristics							ProtocolIE-ID ::= 348
id-CellToReportList									ProtocolIE-ID ::= 349
id-CellMeasurementResultList						ProtocolIE-ID ::= 350
id-HardwareLoadIndicator							ProtocolIE-ID ::= 351
id-ReportingPeriodicity								ProtocolIE-ID ::= 352
id-TNLCapacityIndicator								ProtocolIE-ID ::= 353
id-CarrierList										ProtocolIE-ID ::= 354
id-ULCarrierList									ProtocolIE-ID ::= 355
id-FrequencyShift7p5khz								ProtocolIE-ID ::= 356
id-SSB-PositionsInBurst								ProtocolIE-ID ::= 357
id-NRPRACHConfig									ProtocolIE-ID ::= 358
id-RACHReportInformationList						ProtocolIE-ID ::= 359
id-RLFReportInformationList							ProtocolIE-ID ::= 360
id-TDD-UL-DLConfigCommonNR							ProtocolIE-ID ::= 361
id-CNPacketDelayBudgetDownlink						ProtocolIE-ID ::= 362
id-ExtendedPacketDelayBudget						ProtocolIE-ID ::= 363
id-TSCTrafficCharacteristics						ProtocolIE-ID ::= 364
id-ReportingRequestType								ProtocolIE-ID ::= 365
id-TimeReferenceInformation							ProtocolIE-ID ::= 366
id-CNPacketDelayBudgetUplink						ProtocolIE-ID ::= 369
id-AdditionalPDCPDuplicationTNL-List				ProtocolIE-ID ::= 370
id-RLCDuplicationInformation						ProtocolIE-ID ::= 371
id-AdditionalDuplicationIndication					ProtocolIE-ID ::= 372
id-ConditionalInterDUMobilityInformation			ProtocolIE-ID ::= 373
id-ConditionalIntraDUMobilityInformation			ProtocolIE-ID ::= 374
id-targetCellsToCancel								ProtocolIE-ID ::= 375
id-requestedTargetCellGlobalID						ProtocolIE-ID ::= 376
id-ManagementBasedMDTPLMNList						ProtocolIE-ID ::= 377
id-TraceCollectionEntityIPAddress 					ProtocolIE-ID ::= 378
id-PrivacyIndicator									ProtocolIE-ID ::= 379
id-TraceCollectionEntityURI							ProtocolIE-ID ::= 380
id-mdtConfiguration									ProtocolIE-ID ::= 381
id-ServingNID										ProtocolIE-ID ::= 382
id-NPNBroadcastInformation							ProtocolIE-ID ::= 383
id-NPNSupportInfo									ProtocolIE-ID ::= 384
id-NID												ProtocolIE-ID ::= 385
id-AvailableSNPN-ID-List							ProtocolIE-ID ::= 386
id-SIB10-message									ProtocolIE-ID ::= 387
id-DLCarrierList									ProtocolIE-ID ::= 389
	id-ExtendedTAISliceSupportList					ProtocolIE-ID ::= 390
id-RequestedSRSTransmissionCharacteristics			ProtocolIE-ID ::= 391
id-PosAssistance-Information						ProtocolIE-ID ::= 392
id-PosBroadcast										ProtocolIE-ID ::= 393
id-RoutingID										ProtocolIE-ID ::= 394
id-PosAssistanceInformationFailureList				ProtocolIE-ID ::= 395
id-PosMeasurementQuantities							ProtocolIE-ID ::= 396
id-PosMeasurementResultList							ProtocolIE-ID ::= 397
id-TRPInformationTypeListTRPReq						ProtocolIE-ID ::= 398
id-TRPInformationTypeItem							ProtocolIE-ID ::= 399
id-TRPInformationListTRPResp						ProtocolIE-ID ::= 400
id-TRPInformationItem								ProtocolIE-ID ::= 401
id-LMF-MeasurementID								ProtocolIE-ID ::= 402
id-SRSType											ProtocolIE-ID ::= 403
id-ActivationTime									ProtocolIE-ID ::= 404
id-AbortTransmission								ProtocolIE-ID ::= 405
id-PositioningBroadcastCells						ProtocolIE-ID ::= 406
id-SRSConfiguration									ProtocolIE-ID ::= 407
id-PosReportCharacteristics							ProtocolIE-ID ::= 408
id-PosMeasurementPeriodicity						ProtocolIE-ID ::= 409
id-TRPList											ProtocolIE-ID ::= 410
id-RAN-MeasurementID								ProtocolIE-ID ::= 411
id-LMF-UE-MeasurementID								ProtocolIE-ID ::= 412
id-RAN-UE-MeasurementID								ProtocolIE-ID ::= 413
id-E-CID-MeasurementQuantities						ProtocolIE-ID ::= 414
id-E-CID-MeasurementQuantities-Item					ProtocolIE-ID ::= 415
id-E-CID-MeasurementPeriodicity						ProtocolIE-ID ::= 416
id-E-CID-MeasurementResult							ProtocolIE-ID ::= 417
id-Cell-Portion-ID									ProtocolIE-ID ::= 418
id-SFNInitialisationTime							ProtocolIE-ID ::= 419
id-SystemFrameNumber								ProtocolIE-ID ::= 420
id-SlotNumber										ProtocolIE-ID ::= 421
id-TRP-MeasurementRequestList						ProtocolIE-ID ::= 422
id-MeasurementBeamInfoRequest						ProtocolIE-ID ::= 423
id-E-CID-ReportCharacteristics						ProtocolIE-ID ::= 424
id-ConfiguredTACIndication							ProtocolIE-ID ::= 425
id-Extended-GNB-CU-Name								ProtocolIE-ID ::= 426
id-Extended-GNB-DU-Name								ProtocolIE-ID ::= 427
id-F1CTransferPath									ProtocolIE-ID ::= 428
id-SFN-Offset										ProtocolIE-ID ::= 429
id-TransmissionStopIndicator						ProtocolIE-ID ::= 430
id-SrsFrequency										ProtocolIE-ID ::= 431
id-SCGIndicator										ProtocolIE-ID ::= 432
id-EstimatedArrivalProbability						ProtocolIE-ID ::= 433
id-TRPType											ProtocolIE-ID ::= 434
id-SRSSpatialRelationPerSRSResource					ProtocolIE-ID ::= 435
id-PDCPTerminatingNodeDLTNLAddrInfo					ProtocolIE-ID ::= 436
id-ENBDLTNLAddress									ProtocolIE-ID ::= 437
id-PosMeasurementPeriodicityExtended				ProtocolIE-ID ::= 438
id-PRS-Resource-ID									ProtocolIE-ID ::= 439
id-LocationMeasurementInformation					ProtocolIE-ID ::= 440


END
-- ASN1STOP 

9.4.8	Container Definitions
-- ASN1START 
-- **************************************************************
--
-- Container definitions
--
-- **************************************************************

F1AP-Containers {
itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) 
ngran-access (22) modules (3) f1ap (3) version1 (1) f1ap-Containers (5) }

DEFINITIONS AUTOMATIC TAGS ::= 

BEGIN

-- **************************************************************
--
-- IE parameter types from other modules.
--
-- **************************************************************

IMPORTS
	Criticality,
	Presence,
	PrivateIE-ID,
	ProtocolExtensionID,
	ProtocolIE-ID

FROM F1AP-CommonDataTypes
	maxPrivateIEs,
	maxProtocolExtensions,
	maxProtocolIEs

FROM F1AP-Constants;

-- **************************************************************
--
-- Class Definition for Protocol IEs
--
-- **************************************************************

F1AP-PROTOCOL-IES ::= CLASS {
	&id				ProtocolIE-ID 					UNIQUE,
	&criticality	Criticality,
	&Value,
	&presence		Presence
}
WITH SYNTAX {
	ID				&id
	CRITICALITY		&criticality
	TYPE			&Value
	PRESENCE		&presence
}

-- **************************************************************
--
-- Class Definition for Protocol IEs
--
-- **************************************************************

F1AP-PROTOCOL-IES-PAIR ::= CLASS {
	&id					ProtocolIE-ID 				UNIQUE,
	&firstCriticality	Criticality,
	&FirstValue,
	&secondCriticality	Criticality,
	&SecondValue,
	&presence			Presence
}
WITH SYNTAX {
	ID				&id
	FIRST CRITICALITY		&firstCriticality
	FIRST TYPE				&FirstValue
	SECOND CRITICALITY		&secondCriticality
	SECOND TYPE				&SecondValue
	PRESENCE				&presence
}

-- **************************************************************
--
-- Class Definition for Protocol Extensions
--
-- **************************************************************

F1AP-PROTOCOL-EXTENSION ::= CLASS {
	&id				ProtocolExtensionID			UNIQUE,
	&criticality	Criticality,
	&Extension,
	&presence		Presence
}
WITH SYNTAX {
	ID				&id
	CRITICALITY		&criticality
	EXTENSION		&Extension
	PRESENCE		&presence
}

-- **************************************************************
--
-- Class Definition for Private IEs
--
-- **************************************************************

F1AP-PRIVATE-IES ::= CLASS {
	&id				PrivateIE-ID,
	&criticality	Criticality,
	&Value,
	&presence		Presence
}
WITH SYNTAX {
	ID				&id
	CRITICALITY		&criticality
	TYPE			&Value
	PRESENCE		&presence
}

-- **************************************************************
--
-- Container for Protocol IEs
--
-- **************************************************************

ProtocolIE-Container {F1AP-PROTOCOL-IES : IEsSetParam} ::= 
	SEQUENCE (SIZE (0..maxProtocolIEs)) OF
	ProtocolIE-Field {{IEsSetParam}}

ProtocolIE-SingleContainer {F1AP-PROTOCOL-IES : IEsSetParam} ::= 
	ProtocolIE-Field {{IEsSetParam}}

ProtocolIE-Field {F1AP-PROTOCOL-IES : IEsSetParam} ::= SEQUENCE {
	id				F1AP-PROTOCOL-IES.&id				({IEsSetParam}),
	criticality		F1AP-PROTOCOL-IES.&criticality		({IEsSetParam}{@id}),
	value			F1AP-PROTOCOL-IES.&Value			({IEsSetParam}{@id})
}

-- **************************************************************
--
-- Container for Protocol IE Pairs
--
-- **************************************************************

ProtocolIE-ContainerPair {F1AP-PROTOCOL-IES-PAIR : IEsSetParam} ::= 
	SEQUENCE (SIZE (0..maxProtocolIEs)) OF
	ProtocolIE-FieldPair {{IEsSetParam}}

ProtocolIE-FieldPair {F1AP-PROTOCOL-IES-PAIR : IEsSetParam} ::= SEQUENCE {
	id					F1AP-PROTOCOL-IES-PAIR.&id					({IEsSetParam}),
	firstCriticality	F1AP-PROTOCOL-IES-PAIR.&firstCriticality	({IEsSetParam}{@id}),
	firstValue			F1AP-PROTOCOL-IES-PAIR.&FirstValue			({IEsSetParam}{@id}),
	secondCriticality	F1AP-PROTOCOL-IES-PAIR.&secondCriticality	({IEsSetParam}{@id}),
	secondValue			F1AP-PROTOCOL-IES-PAIR.&SecondValue			({IEsSetParam}{@id})
}

-- **************************************************************
--
-- Container for Protocol Extensions
--
-- **************************************************************

ProtocolExtensionContainer {F1AP-PROTOCOL-EXTENSION : ExtensionSetParam} ::= 
	SEQUENCE (SIZE (1..maxProtocolExtensions)) OF
	ProtocolExtensionField {{ExtensionSetParam}}

ProtocolExtensionField {F1AP-PROTOCOL-EXTENSION : ExtensionSetParam} ::= SEQUENCE {
	id					F1AP-PROTOCOL-EXTENSION.&id				({ExtensionSetParam}),
	criticality			F1AP-PROTOCOL-EXTENSION.&criticality	({ExtensionSetParam}{@id}),
	extensionValue		F1AP-PROTOCOL-EXTENSION.&Extension		({ExtensionSetParam}{@id})
}

-- **************************************************************
--
-- Container for Private IEs
--
-- **************************************************************

PrivateIE-Container {F1AP-PRIVATE-IES : IEsSetParam } ::= 
	SEQUENCE (SIZE (1.. maxPrivateIEs)) OF
	PrivateIE-Field {{IEsSetParam}}

PrivateIE-Field {F1AP-PRIVATE-IES : IEsSetParam} ::= SEQUENCE {
	id					F1AP-PRIVATE-IES.&id				({IEsSetParam}),
	criticality			F1AP-PRIVATE-IES.&criticality		({IEsSetParam}{@id}),
	value				F1AP-PRIVATE-IES.&Value				({IEsSetParam}{@id})
}

END
-- ASN1STOP 


9.5	Message Transfer Syntax
F1AP shall use the ASN.1 Basic Packed Encoding Rules (BASIC-PER) Aligned Variant as transfer syntax, as specified in ITU-T Recommendation X.691 [5].
9.6	Timers

10	Handling of unknown, unforeseen and erroneous protocol data
Clause 10 of TS 38.413 [3] is applicable for the purposes of the present document, with the following additions for non-UE-associated procedures: 
-	In case of Abstract Syntax Error, when reporting the Criticality Diagnostics IE for not comprehended IE/IEgroups or missing IE/IE groups, the Transaction ID IE shall also be included;
-	In case of Logical Error, when reporting the Criticality Diagnostics IE, the Transaction ID IE shall also be included;
- 	In case of Logical Error in a response message of a Class 1 procedure, or failure to comprehend Transaction ID IE from a received message, the procedure shall be considered as unsuccessfully terminated or not terminated (e.g., transaction ID unknown in response message), and local error handling shall be initiated.

Annex A (informative):
Change History

Change history
Date
Meeting
TDoc
CR
Rev
Cat
Subject/Comment
New version
2017-06
R3 NR#2
R3-172493
-
-
-
First version
0.1.0
2017-07
R3 NR#2
R3-172640
-
-
-
Incorporated agreed TPs from R3 NR#2 Adhoc
0.2.0
2017-08
R3#97
R3-173451
-
-
-
Incorporated agreed TPs from R3#97
0.3.0
2017-10
R3#97b
R3-174247
-
-
-
Incorporated agreed TPs from R3#97b
0.4.0
2017-12
R3#98
R3-175062
-
-
-
Incorporated agreed TPs from R3#98
0.5.0
2017-12
RAN#78
RP-172287



Submitted for approval to RAN
1.0.0
2017-12
RAN#78




TR approved by RAN plenary
15.0.0
2018-03
RP-79
RP-180468
0001
2
B
Baseline CR for March version of TS 38.473 covering agreements of RAN3#99
15.1.0
2018-04





Editorial correction to ASN.1 (correction to id-TimeToWait ProtocolIE-ID)
15.1.1
2018-06
RP-80
RP-181237
0011
6
B
Introduction of SA NR (38.473 Baseline CR covering RAN3 agreements)
15.2.0
2018-06
RP-80
RP-181239
0043
3
F
Essential corrections of EN-DC for NSA NR  (38.473 Baseline CR covering RAN3 agreements)
15.2.0
2018-06
RP-80
RP-181237
0045
-
B
F1 support for LTE - NR coexistence
15.2.0
2018-06
RP-80




Correction to ASN.1 and to Change History table
15.2.1
2018-09
RP-81
RP-181920
0055
2
F
Introduction of DU Configuration Query
15.3.0
2018-09
RP-81
RP-181921
0056
4
F
CR to 38.473 on further clarifications on System information transfer over F1
15.3.0
2018-09
RP-81
RP-181921
0058
4
F
CR to 38.473 on corrections to System information delivery
15.3.0
2018-09
RP-81
RP-181920
0059
1
F
CR to 38.473 on corrections to PWS transfer over F1
15.3.0
2018-09
RP-81
RP-181921
0063
3
F
CR to 38.473 on PDCP SN over F1 interface
15.3.0
2018-09
RP-81
RP-181922
0064
3
F
NR Corrections (38.473 Baseline CR covering RAN3-101 agreements)
15.3.0
2018-09
RP-81
RP-181997
0068
-
F
Introduction of UL AMBR on F1
15.3.0
2018-09
RP-81
RP-181921
0072
3
F
Correction on cell management
15.3.0
2018-09
RP-81
RP-181921
0073
2
F
RLC Mode Indication over F1
15.3.0
2018-09
RP-81
RP-181921
0076
3
F
CR to 38.473 on UE Identity Index value
15.3.0
2018-09
RP-81
RP-181920
0077
1
F
Correction for UE Context Modification on presence of ServCellIndex IE
15.3.0
2018-09
RP-81
RP-181920
0078
-
F
Executing duplication for RRC-container
15.3.0
2018-09
RP-81
RP-181921
0079
1
F
Indication of RLC re-establishment at the gNB-DU
15.3.0
2018-09
RP-81
RP-181920
0080
-
F
Exchange of SMTC over F1
15.3.0
2018-09
RP-81
RP-181920
0081
-
F
Solving remaining issues with QoS parameters – TS 38.473
15.3.0
2018-09
RP-81
RP-181921
0090

F
Correction of 5GS TAC
15.3.0
2018-09
RP-81
RP-181921
0095
1
F
Extend the RANAC size to 8bits
15.3.0
2018-09
RP-81
RP-181921
0097
-
F
Corrections of Choice
15.3.0
2018-09
RP-81
RP-181921
0098
1
F
Correction of TNL criticality
15.3.0
2018-09
RP-81
RP-181921
0099
1
F
Corrections of usage of single container
15.3.0
2018-09
RP-81
RP-181921
0105
2
B
RRC version handling
15.3.0
2018-09
RP-81
RP-181921
0106
1
B
Introduction of Overload Handling in F1-C
15.3.0
2018-09
RP-81
RP-181921
0113
-
F
CR to 38.473 on presence of QoS information
15.3.0
2018-09
RP-81
RP-181921
0114
1
F
Correction C-RNTI format
15.3.0
2018-09
RP-81
RP-181921
0115
-
F
Correction of QoS Parameters
15.3.0
2018-09
RP-81
RP-181921
0116
1
F
Correction on F1 Setup Request
15.3.0
2018-12
RP-82
RP-182446
0070
3
F
RRC Delivery Indication
15.4.0
2018-12
RP-82
RP-182446
0117
1
F
Correction of AMBR Enforcement
15.4.0
2018-12
RP-82
RP-182446
0138
-
F
CR for correction on Initial UL RRC message transfer 
15.4.0
2018-12
RP-82
RP-182446
0140
1
F
CR to 38.473 on bearer type change indication
15.4.0
2018-12
RP-82
RP-182446
0142
1
F
CR to 38.473 on correction to PWS System Information
15.4.0
2018-12
RP-82
RP-182446
0144
2
F
CR to 38.473 on asymmetric mapping for UL and DL QoS flow
15.4.0
2018-12
RP-82
RP-182447
0145
4
F
Corrections on UE-associated LTE/NR resource coordination
15.4.0
2018-12
RP-82
RP-182446
0147
2
F
CR for F1 Cell Management
15.4.0
2018-12
RP-82
RP-182447
0150
1
F
Missing Transaction ID in non-UE-associated procedures
15.4.0
2018-12
RP-82
RP-182446
0157
1
F
CR to 38.473 on mapping of servingCellMO and Serving Cell
15.4.0
2018-12
RP-82
RP-182446
0160
1
F
CR to 38.473 on UE context modification required procedure
15.4.0
2018-12
RP-82
RP-182447
0165
1
F
Addition of the RLC Mode information for bearer modification
15.4.0
2018-12
RP-82
RP-182448
0167
2
F
Rapporteur CR to align tabular
15.4.0
2018-12
RP-82
RP-182448
0168
2
F
Rapporteur CR to align ASN.1
15.4.0
2018-12
RP-82
RP-182447
0169
2
F
Correction of MaxnoofBPLMNs
15.4.0
2018-12
RP-82
RP-182351
0174
2
F
Correction on PDCP SN length on F1
15.4.0
2018-12
RP-82
RP-182447
0178
2
F
CR for TS 38.473 for MR-DC coordination
15.4.0
2018-12
RP-82
RP-182447
0179
2
F
Support of system information update for active UE without CSS
15.4.0
2018-12
RP-82
RP-182447
0187
1
F
CR to 38.473 on clarification to the presence of UE AMBR
15.4.0
2018-12
RP-82
RP-182506
0195
2
F
CR on Scell release for RLC failure
15.4.0
2018-12
RP-82
RP-182447
0205
1
F
About bandcombinationindex and featureSetEntryIndex
15.4.0
2018-12
RP-82
RP-182447
0211
1
F
CR to 38.473 on DRB PDCP duplication
15.4.0
2018-12
RP-82
RP-182447
0216
1
F
CR to 38.473 on clarifications on system information update over F1
15.4.0
2018-12
RP-82
RP-182448
0219
-
F
Correction of RRC version handling and UE inactivity notification
15.4.0
2019-01
RP-82




- correction to ASN.1:
addiming a missing change to "WriteReplaceWarningResponseIEs F1AP-PROTOCOL-IES ::= {"
15.4.1
2019-03
RP-83
RP-190555
0202
2
F
Indication that cells are only UL or DL on F1
15.5.0
2019-03
RP-83
RP-190554
0204
1
F
AMF intitiated UE Context Release failure cause
15.5.0
2019-03
RP-83
RP-190554
0220
1
F
Correction to reconfiguration with sync for gNB-DU
15.5.0
2019-03
RP-83
RP-190554
0225
1
F
Introduction of PH-InforSCG in DU to CU RRC Information
15.5.0
2019-03
RP-83
RP-190554
0226
1
F
CR to 38.473 on Measurement gap coordination
15.5.0
2019-03
RP-83
RP-190554
0228
1
F
CR for TS 38.473 for MR-DC coordination
15.5.0
2019-03
RP-83
RP-190554
0229
2
F
Condition for inclusion of the Dedicated SI Delivery Needed UE List IE
15.5.0
2019-03
RP-83
RP-190554
0230
1
F
Correction of the Transmission stop/restart indication
15.5.0
2019-03
RP-83
RP-190554
0231
-
F
Corrections on gNB-CU/gNB-DU Configuration Update
15.5.0
2019-03
RP-83
RP-190556
0236
2
F
Correction of QoS Flow Mapping Indication
15.5.0
2019-03
RP-83
RP-190554
0244
-
F
Release due to pre-emption
15.5.0
2019-03
RP-83
RP-190554
0245
2
F
CR on RRC container in UE context modification request message
15.5.0
2019-03
RP-83
RP-190554
0246
2
F
CR on UE context modification refuse
15.5.0
2019-03
RP-83
RP-190554
0247
-
F
Transaction ID in Error Indication procedure
15.5.0
2019-03
RP-83
RP-190554
0249
2
F
Cells to be deactivated over F1
15.5.0
2019-03
RP-83
RP-190554
0251
1
F
CR to 38.473 on SRB duplication and LCID
15.5.0
2019-03
RP-83
RP-190554
0258
-
F
CR to 38.473 on corrections for removal of PDCP duplication for SRB
15.5.0
2019-03
RP-83
RP-190554
0263
1
F
CR to 38.473 on transfering UEAssistanceInformation over F1
15.5.0
2019-03
RP-83
RP-190554
0265
-
F
Rapporteur updates
15.5.0
2019-03
RP-83
RP-190554
0266
1
F
Correction on gNB-DU Resource Coordination
15.5.0
2019-03
RP-83
RP-190554
0267
1
F
Endpoint IP address and port
15.5.0
2019-03
RP-83
RP-190554
0268
1
F
Correction to add paging origin IE
15.5.0
2019-03
RP-83
RP-190555
0269
2
F
Multiple SCTP associations over F1AP
15.5.0
2019-03
RP-83
RP-190554
0272
1
F
About Cells Failed to be Activated IE in gNB-CU Configuration Update Ack
15.5.0
2019-03
RP-83
RP-190556
0273
1
F
gNB-DU UE Aggregate Maximum Bit Rate Uplink correction
15.5.0
2019-03
RP-83
RP-190554
0276
1
F
RRC Reconfiguration failure
15.5.0
2019-03
RP-83
RP-190554
0278
1
F
Node behaviour at reception of DU to CU RRC Information
15.5.0
2019-03
RP-83
RP-190554
0281
-
F
Addition of Transaction ID to Initial UL RRC Message Transfer
15.5.0
2019-07
RP-84
RP-191397
0200
5
F
RAN sharing with multiple Cell ID broadcast
15.6.0
2019-07
RP-84
RP-191397
0270
5
F
Addition of Network Access Rate Reduction message
15.6.0
2019-07
RP-84
RP-191397
0271
3
F
RAN UE ID for F1
15.6.0
2019-07
RP-84
RP-191396
0283
2
F
MR-DC resource coordination in F1
15.6.0
2019-07
RP-84
RP-191396
0316
2
F
Full configuration indication from gNB-CU to gNB-DU.
15.6.0
2019-07
RP-84
RP-191396
0322
2
F
CR to 38.473 on clarification to RRC reconfigure complete indicator
15.6.0
2019-07
RP-84
RP-191394
0326
2
F
CR to 38.473 on deconfiguring CA based PDCP duplication for DRB
15.6.0
2019-07
RP-84
RP-191395
0330
3
F
CR to 38.473 on Removal of Multiple TNLAs
15.6.0
2019-07
RP-84
RP-191396
0348
-
F
Full configuration in UE Context Setup
15.6.0
2019-07
RP-84
RP-191396
0351
2
F
CR on PWS segmentation over F1 
15.6.0
2019-07
RP-84
RP-191396
0352
1
F
CR on cell type over F1 
15.6.0
2019-07
RP-84
RP-191396
0357
-
F
Rapporteur updates: Alignment and editorials
15.5.0
2019-07
RP-84
RP-191396
0358
-
F
Rapporteur update: Correction of Presence for DRB information
15.6.0
2019-07
RP-84
RP-191396
0359
-
F
Rapporteur updates: Correction of Presence for E-UTRA PRACH Configuration
15.6.0
2019-07
RP-84
RP-191396
0370
-
F
Full configuration IE included in the UE Context Modification Response.
15.6.0
2019-07
RP-84
RP-191396
0376


F
CR to 38.473 on clarification for UP TNL Information IE over F1
15.6.0
2019-07
RP-84
RP-191396
0377
2
F
Procedure description on optional IEs in CU to DU RRC information IE.
15.6.0
2019-09
RP-85
RP-192166
0343
3
F
CR on MR-DC low layer coordination with an MgNB-DU
15.7.0
2019-09
RP-85
RP-192166
0344
2
F
CR on MCG PHR format in MgNB-DU
15.7.0
2019-09
RP-85
RP-192166
0388


F
CR on DC Coordination for PDCCH Blind Detection
15.7.0
2019-09
RP-85
RP-192167
0393
1
F
Rapporteur update - clarification of semantics
15.7.0
2019-09
RP-85
RP-192166
0399 
1
F
Clarification for TNLA removal
15.7.0
2019-12
RP-86
RP-192915
0318
5
F
Correction about gNB-CU System Information IE
15.8.0
2019-12
RP-86
RP-192915
0447
1
F
On CellGroupConfig handling
15.8.0
2019-12
RP-86
RP-192915
0458
1
 F
 Correction of S-NSSAI coding
15.8.0
2019-12
RP-86
RP-192915
0459
1
F
Removal of Requested P-MaxFR2
15.8.0
2019-12
RP-86
RP-192915
0479
2
F
Addition of Message Identifier and Serial Number to PWS Cancel Request
15.8.0
2019-12
RP-86
RP-192916
0482
2
F
Clarifications on SCell lists
15.8.0
2019-12
RP-86
RP-192916
0494
-
F
RRC Container in Modification Procedure
15.8.0
2019-12
RP-86
RP-192916
0508
0
F
CR to 38.473 on applicability of the IE Selected BandCombinationIndex and Selected FeatureSetEntryIndex
15.8.0
2019-12
RP-86
RP-192916
0509
1
F
CR to 38.473 on MeasGapSharingConfig and gNB-CU System Information
15.8.0
2019-12
RP-86
RP-192916
0510
1
F
CR to 38.473 on cause values over F1
15.8.0
2019-12
RP-86
RP-192916
0515
2
F
Clarification on Initial UL RRC Message Transfer procedure
15.8.0
2019-12
RP-86
RP-192913
0280
7
F
Trace function support for F1AP
16.0.0
2019-12
RP-86
RP-192908
0287
7
B
Support for CLI
16.0.0
2019-12
RP-86
RP-192913
0314
5
B
Introduction of Additional RRM Policy Index (ARPI)
16.0.0
2019-12
RP-86
RP-192908
0339
6
B
CR to F1-AP for RIM new message
16.0.0
2019-12
RP-86
RP-192915
0460

F
Removal of unused IEs
16.0.0
2019-12
RP-86
RP-192913
0463
1
C
Extending the MDBV Range
16.0.0
2019-12
RP-86
RP-192910
0514
3
B
CR for TS38.473 on supporting SN Resume during the RRCResume procedure
16.0.0
2019-12
RP-86
RP-192914
0518
2
F
Support for setting up IPSec a priori in F1
16.0.0
2020-03
RP-87-e
RP-200428
0522
1
A
Correction of PWS Failure Indication
16.1.0
2020-03
RP-87-e
RP-200428
0525
-
A
Correction of the presence of UL UP TNL Information to be setup List IE in tabular
16.1.0
2020-03
RP-87-e
RP-200425
0527
2
F
 Corrections to CLI 
16.1.0
2020-03
RP-87-e
RP-200425
0528
1
D
Rapporteur: Editorial updates
16.1.0
2020-03
RP-87-e
RP-200425
0530
2
B
E2E delay measurement for Qos monitoring for URLLC
16.1.0
2020-03
RP-87-e
RP-200428
0534
1
A
Correction relating to Initial UL RRC Message Transfer procedure CR 38.473
16.1.0
2020-07
RP-88-e
RP-201077
0285
17
B
BL CR to 38.473: Support for IAB
16.2.0
2020-07
RP-88-e
RP-201074
0432
12
B
Support of NR V2X over F1
16.2.0
2020-07
RP-88-e
RP-201082
0441
12
B
Addition of SON features
16.2.0
2020-07
RP-88-e
RP-201079
0477
8
B
Introduction of NR_IIOT support to TS 38.473
16.2.0
2020-07
RP-88-e
RP-201075
0481
10
B
Baseline CR for introducing Rel-16 NR mobility enhancement
16.2.0
2020-07
RP-88-e
RP-201082
0492
6
B
Addition of MDT features
16.2.0
2020-07
RP-88-e
RP-201080
0502
7
B
Introduction of NPN
16.2.0
2020-07
RP-88-e
RP-201076
0537
1
B
CR38.473 on TDD pattern for NR-DC power control cordination for sol1
16.2.0
2020-07
RP-88-e
RP-201085
0539
-
F
Rapporteur: Corrections after implementation
16.2.0
2020-07
RP-88-e
RP-201090
0543
2
A
Encoding PLMNs in served cell information NR
16.2.0
2020-07
RP-88-e
RP-201091
0545
1
A
Correction for usage of Cell Broadcast Cancelled List
16.2.0
2020-07
RP-88-e
RP-201091
0548
1
A
Correction on UE CONTEXT MODIFICATION REQUIRED message
16.2.0
2020-07
RP-88-e
RP-201085
0561
1
F
Correction on CLI
16.2.0
2020-07
RP-88-e
RP-201090
0567
-
A
Encoding PLMNs in served cell information IEs - semantics corrections
16.2.0
2020-07
RP-88-e
RP-201092
0570
1
A
Correction for UL UP TNL Information
16.2.0
2020-07
RP-88-e
RP-201092
0572
-
A
Correction on RRC Container in Initial UL RRC Messag Transfer
16.2.0
2020-07
RP-88-e
RP-201092
0576
1
A
Correction on RRC Connection Reconfiguration Complete Indicator
16.2.0
2020-07
RP-88-e
RP-201092
0581
2
F
Corrections of Inactive UE Context stored at gNB-DU
16.2.0
2020-07
RP-88-e
RP-201085
0600
2
F
Correction on RF parameters in NR cell information
16.2.0
2020-07
RP-88-e
RP-201090
0601
4
 F
 Correction of S-NSSAI range
16.2.0
2020-07
RP-88-e
RP-201092
0603
2
A
Correction for Handover Preparation Information
16.2.0
2020-07
RP-88-e
RP-201092
0607
1
A
CR on Concurrent Warning Message Indicator over F1 (Rel-16)
16.2.0
2020-07
RP-88-e
RP-201092
0615
-
A
Section renumbering for PWS cancel
16.2.0
2020-07
RP-88-e
RP-201092
0616
-
A
Correction on DL RRC MESSAGE TRANSFER
16.2.0
2020-07
RP-88-e
RP-201092
0618

A
Addition of abnormal conditions in PWS Cancel procedure
16.2.0
2020-09
RP-89-e
RP-201850
0495
10
B
Introduction of positioning support over F1AP
16.3.0
2020-09
RP-89-e
RP-201956
0557
2
A
Support of PSCell/SCell-only operation mode
16.3.0
2020-09
RP-89-e
RP-201956
0583
5
F
Cell Creation Rejection when max number of supported cells is exceeded at CU CR 38.473
16.3.0
2020-09
RP-89-e
RP-201956
0587
5
A
Measurement gap deactivation over F1AP CR 38.473
16.3.0
2020-09
RP-89-e
RP-201949
0619
2
F
Slot list length correction in TDD UL-DL Configuration
16.3.0
2020-09
RP-89-e
RP-201956
0625
1
F
Addition of abnormal conditions in Write-Replace Warning procedure
16.3.0
2020-09
RP-89-e
RP-201956
0628
2
A
Correction of PSCell/SCell-only mode
16.3.0
2020-09
RP-89-e
RP-201956
0634
1
A
Correction on UE Context Modification Procedure
16.3.0
2020-09
RP-89-e
RP-201956
0639
1
F
Rapporteur Corrections
16.3.0
2020-09
RP-89-e
RP-201949
0640
-
F
Correction of procedure ID
16.3.0
2020-09
RP-89-e
RP-201956
0642
-
A
Correction of PWS cancel
16.3.0
2020-09
RP-89-e
RP-201949
0643
1
F
Corrections on PC5 Link Aggregated Bit Rate
16.3.0
2020-09
RP-89-e
RP-201949
0660
-
F
Correction on the Maximum Number of CHO Preparations in F1AP
16.3.0
2020-09
RP-89-e
RP-201956
0663
1
F
Corrections to 38.473 on node name type
16.3.0
2020-09
RP-89-e
RP-201947
0664
1
F
Correction on IAB-DU configuration
16.3.0
2020-09
RP-89-e
RP-201982
0671

F
Correction on IAB-DU configuration
16.3.0
2020-09
RP-89-e




Correct wrong numbering of protocolIE-ID in clause 9.4.7
16.3.1
2020-12
RP-90-e
RP-202310
0645
2
F
Uniqueness of BH RLC channel ID
16.4.0
2020-12
RP-90-e
RP-202310
0658
3
F
Correction on V2X related information
16.4.0
2020-12
RP-90-e
RP-202310
0665
2
F
Correction on unsuccessful operations of IAB procedures
16.4.0
2020-12
RP-90-e
RP-202310
0666
1
F
Correction on the identification of IAB-donor-DU
16.4.0
2020-12
RP-90-e
RP-202310
0667
2
F
Correction on the Context Setup procedure for IAB node
16.4.0
2020-12
RP-90-e
RP-202310
0668
1
F
Correction on BAP address
16.4.0
2020-12
RP-90-e
RP-202310
0672
1
F
CR on F1-C transfer for Rel-16 IAB
16.4.0
2020-12
RP-90-e
RP-202311
0677
-
F
Correction of F1AP positioning procedures
16.4.0
2020-12
RP-90-e
RP-202311
0678
1
F
Corrections to tabular and asn.1 for NR positioning (F1AP)
16.4.0
2020-12
RP-90-e
RP-202310
0681
1
F
Correction of alternative QoS profile
16.4.0
2020-12
RP-90-e
RP-202313
0683
-
F
Removal of duplicated imports
16.4.0
2020-12
RP-90-e
RP-202312
0684
2
F
Corrections of UL and DL carrier list 
16.4.0
2020-12
RP-90-e
RP-202311
0689
1
F
RRC alignement and various correction including ASN.1
16.4.0
2020-12
RP-90-e
RP-202311
0691
1
F
Correction of RLC Duplication Information over F1
16.4.0
2020-12
RP-90-e
RP-202288
0695 
3
A
Correction on value range of UAC reduction Indication
16.4.0
2020-12
RP-90-e
RP-202311
0709
1
F
Coupling TRP ID and Cell ID in Measurement procedures 
16.4.0
2021-03
RP-91-e
RP-210123
0431
7
B
Introduction of SFN Offset per cell over F1
16.5.0
2021-03
RP-91-e
RP-210240
0632
6
A
Correction on Overlapping Band Handling over F1
16.5.0
2021-03
RP-91-e
RP-210235
0676
2
F
Correction on PRACH coordination
16.5.0
2021-03
RP-91-e
RP-210239
0702
3
F
Cause value on F1 for insufficient UE capabilities CR 38.473
16.5.0
2021-03
RP-91-e
RP-210239
0711
1
F
Update on QoS monitoring control
16.5.0
2021-03
RP-91-e
RP-210233
0715
2
F
Stage-3 CR on transmission stop for Rel-16 DAPS handover
16.5.0
2021-03
RP-91-e
RP-210232
0720
1
F
Correction of NPN related Cell Information
16.5.0
2021-03
RP-91-e
RP-210231
0721
-
F
Correction on IAB configuration
16.5.0
2021-03
RP-91-e
RP-210231
0722
-
F
Correction on BAP address configuration for IAB-donor-DU
16.5.0
2021-03
RP-91-e
RP-210230
0725
1
F
Including SRS frequency information in Positioning Information Request
16.5.0
2021-03
RP-91-e
RP-210231
0728
2
F
CR to 38.473: Correction on IAB related definitions and unsuccessful establishment of a BH RLC channel
16.5.0
2021-03
RP-91-e
RP-210230
0736
-
F
Correction of the PCI IE presence in the ASN.1 for the SRS Configuration 
16.5.0
2021-06
RP-92-e
RP-211334
0704
4
A
How to release SCG configuration between MN-CU and MN-DU CR 38.473
16.6.0
2021-06
RP-92-e
RP-211315
0712
2
F
Clarification on TAI Slice Support List
16.6.0
2021-06
RP-92-e
RP-211323
0740
2
F
Enabling CHO with SCG configuration
16.6.0
2021-06
RP-92-e
RP-211327
0743
-
F
Correction of Spatial Relation Information
16.6.0
2021-06
RP-92-e
RP-211317
0744
-
F
Correction on reference to RACH-Report
16.6.0
2021-06
RP-92-e
RP-211330
0753

F
Stage-3 CR on system information message over F1 (Rel-16)
16.6.0
2021-06
RP-92-e
RP-211333
0760
-
A
Correction on SRB ID
16.6.0
2021-06
RP-92-e
RP-211334
0762
3
A
gNB-DU UE Aggregate Maximum Bit Rate Uplink correction
16.6.0
2021-06
RP-92-e
RP-211322
0763
-
F
Miscellaneous corrections on IAB in TS 38.473
16.6.0
2021-06
RP-92-e
RP-211327
0765
1
F
Correction on SFN Initialisation Time
16.6.0
2021-06
RP-92-e
RP-211327
0766
-
F
Correction on relative cartesian coordinate
16.6.0
2021-06
RP-92-e
RP-211322
0770
1
F
Correction on BH RLC CH configured for BAP control PDU
16.6.0
2021-06
RP-92-e
RP-211322
0771
-
F
Correction on gNB-DU Resource Configuration
16.6.0
2021-06
RP-92-e
RP-211322
0772
1
F
Correction on UL BH information configuration for DRBs  support CA based duplication
16.6.0
2021-06
RP-92-e
RP-211317
0776
1
F
Correction on MLB for TS 38.473
16.6.0
2021-09
RP-93-e
RP-211876

0790
1
F
Correction of served cell information for NPN
16.7.0
2021-09
RP-93-e
RP-211880
0792
1
F
Correction of wrong CR implementation for Stage-3 CR on transmission stop for Rel-16 DAPS handover
16.7.0
2021-09
RP-93-e
RP-211883
0796
1
F
Adding procedural text for System Frame Number and Slot Number
16.7.0
2021-09
RP-93-e
RP-211881
0800
-
A
Correction of the IE related to E-UTRA resource coordination in F1AP
16.7.0
2021-12
RP-94-e
RP-212864
0804
1
A
Correction on F1 Removal for RAN Sharing in Rel-16
16.8.0
2021-12
RP-94-e
RP-212864
0811
4
F
Incorrect Node Name IE in ASN.1
16.8.0
2021-12
RP-94-e
RP-213174
0822
3
F
Correction on PRS-only TRP
16.8.0
2021-12
RP-94-e
RP-212867
0827
1
F
Support of providing spatial relation per SRS resource from gNB-CU to gNB-DU
16.8.0
2022-03
RP-95-e
RP-220279
0778
4
F
Support of dynamic ACL during dual connectivity
16.9.0
2022-03
RP-95-e
RP-220276
0837
1
F
Correction on packet delay budget for IAB access link in TS 38.473
16.9.0
2022-03
RP-95-e
RP-220276
0838
-
F
CR to 38.473: Correction on IAB TNL Address Allocation procedure
16.9.0
2022-03
RP-95-e
RP-220242
0844
2
F
CR to TS38.473: Correction on PC5 QoS parameters for NR V2X
16.9.0
2022-03
RP-95-e
RP-220281
0847
1
F
Correction on positioning information configuration
16.9.0
2022-03
RP-95-e
RP-220281
0848
1
F
Correction on Measurement Periodicity
16.9.0
2022-03
RP-95-e
RP-220281
0849
1
F
Correction on PRS Beam Information
16.9.0
2022-03
RP-95-e
RP-220281
0850

F
CR for the correction on measurement gap configuration for position
16.9.0
2022-03
RP-95-e
RP-220278
0854
1
F
Correction of frequency information for DL only or UL only cell
16.9.0
2022-03
RP-95-e
RP-220276
0860

F
(Stage-3) Clarification on IAB Address Remove
16.9.0
2022-06
RP-96
RP-221150
0878
-
F
F1AP CR for ACL remaining issues
16.10.0
2022-06
RP-96
RP-221149
0912
1
F
Correction on IAB-DU cell resource configuration
16.10.0
2022-06
RP-96
RP-221152
0922
2
F
Correction for PRS Muting
16.10.0
2022-06
RP-96
RP-221150
0950
2
F
SIB Issues Rel-16
16.10.0
2022-06
RP-96
RP-221150
0952
1
F
gNB-CU and gNB-DU Name in Configuration Update Procedures
16.10.0
2022-06
RP-96
RP-221152
0963
1
F
ASN.1 correction for UL-AoA
16.10.0

