﻿




Contents
Foreword	16
1	Scope	17
2	References	18
3	Definitions of terms, symbols and abbreviations	22
3.1	Terms	22
3.2	Symbols	23
3.3	Abbreviations	23
4	Architecture considerations	25
5	CDR parameters and abstract syntax	26
5.0	General	26
5.1	CDR parameter description	26
5.1.1	Generic CDR parameters	26
5.1.1.0	Introduction	26
5.1.1.1.0A	3GPP PS Data Off Status	26
5.1.1.1.0B	Data volume octets	26
5.1.1.1	Serving Network Identity	26
5.1.1.2	Service Context Id	26
5.1.1.3	Subscription Identifier	26
5.1.1.4	Service Specific Info	27
5.1.1.5	Service Specific Type	27
5.1.1.6	Service Specific Data	27
5.1.1.7	Subscriber Equipment Number	27
5.1.2	Bearer level CDR parameters	27
5.1.2.0	General	27
5.1.2.1	CS domain CDR parameters	27
5.1.2.1.0	Introduction	27
5.1.2.1.1	Additional Charging Information	27
5.1.2.1.2	AoC parameters/change of AoC parameters	27
5.1.2.1.3	Basic Service/change of service/ISDN Basic Service	27
5.1.2.1.4	Call duration	28
5.1.2.1.5	Call reference	30
5.1.2.1.6	Calling/called/connected/translated number	30
5.1.2.1.7	Calling Party Number	30
5.1.2.1.8	CAMEL call leg information	30
5.1.2.1.9	CAMEL information	31
5.1.2.1.10	CAMEL initiated CF indicator	31
5.1.2.1.11	CAMEL modified Service Centre	31
5.1.2.1.12	CAMEL SMS Information	31
5.1.2.1.13	Cause for termination	32
5.1.2.1.14	Channel Coding Accepted/Channel Coding Used	32
5.1.2.1.15	Data volume	32
5.1.2.1.16	Default call/SMS handling	32
5.1.2.1.17	Destination Subscriber Number	32
5.1.2.1.18	Diagnostics	32
5.1.2.1.19	EMS-Digits	33
5.1.2.1.20	EMS-Key	33
5.1.2.1.21	Entity number	33
5.1.2.1.22	Equipment id	33
5.1.2.1.23	Equipment type	33
5.1.2.1.24	Event time stamps	33
5.1.2.1.25	Fixed Network User Rate	34
5.1.2.1.26	Free format data	34
5.1.2.1.27	Free format data append indicator	34
5.1.2.1.28	GsmSCF address	34
5.1.2.1.29	Guaranteed Bit Rate	34
5.1.2.1.30	HSCSD parameters/Change of HSCSD parameters	35
5.1.2.1.31	Incoming/outgoing trunk group	35
5.1.2.1.32	Interrogation result	35
5.1.2.1.33	IMEI Check Event	35
5.1.2.1.34	IMEI Status	35
5.1.2.1.35	JIP Parameter	36
5.1.2.1.36	JIP Query Status Indicator	36
5.1.2.1.37	JIP Source Indicator	36
5.1.2.1.38	LCS Cause	36
5.1.2.1.39	LCS Client Identity	36
5.1.2.1.40	LCS Client Type	36
5.1.2.1.41	LCS Priority	36
5.1.2.1.42	LCS QoS	36
5.1.2.1.43	Level of CAMEL service	37
5.1.2.1.44	Location/change of location	37
5.1.2.1.45	Location Estimate	37
5.1.2.1.46	Location Extension	37
5.1.2.1.47	Location Routing Number (LRN)	37
5.1.2.1.48	Location Type	37
5.1.2.1.49	LRN Query Status Indicator	37
5.1.2.1.50	LRN Source Indicator	38
5.1.2.1.51	Maximum Bit Rate	38
5.1.2.1.52	Measure Duration	38
5.1.2.1.53	Message reference	38
5.1.2.1.54	MLC Number	38
5.1.2.1.55	Mobile station classmark/change of classmark	38
5.1.2.1.56	MOLR Type	38
5.1.2.1.57	MSC Address	38
5.1.2.1.58	MSC Server Indication	39
5.1.2.1.59	Network Call Reference	39
5.1.2.1.60	Notification to MS user	39
5.1.2.1.61	Number of DP encountered	39
5.1.2.1.62	Number of forwarding	39
5.1.2.1.63	Old /new location	39
5.1.2.1.64	Partial Record Type	39
5.1.2.1.65	Positioning Data	39
5.1.2.1.66	Positioning Data	39
5.1.2.1.67	Privacy Override	39
5.1.2.1.68	Radio channel requested/radio channel used/change of radio channel	39
5.1.2.1.69	Rate Indication	40
5.1.2.1.70	Reason for Service Change	40
5.1.2.1.71	Record extensions	40
5.1.2.1.72	Record type	40
5.1.2.1.73	Recording Entity	40
5.1.2.1.74	Redial attempt	40
5.1.2.1.74A	Related ICID	40
5.1.2.1.75	Roaming number	40
5.1.2.1.76	Routing number	40
5.1.2.1.77	Sequence number	41
5.1.2.1.78	Served IMEI	41
5.1.2.1.79	Served IMSI	41
5.1.2.1.80	Served MSISDN	41
5.1.2.1.81	Service centre address	41
5.1.2.1.82	Service Change Initiator	41
5.1.2.1.83	Service key	41
5.1.2.1.84	Short message service result	41
5.1.2.1.85	Speech version supported/Speech version used	41
5.1.2.1.86	Supplementary service(s)	41
5.1.2.1.87	Supplementary service action	42
5.1.2.1.88	Supplementary service action result	42
5.1.2.1.89	Supplementary service parameters	42
5.1.2.1.90	Supplementary service(s)	42
5.1.2.1.91	System type	42
5.1.2.1.92	Transparency indicator	42
5.1.2.1.93	Update result	42
5.1.2.2	PS domain CDR parameters	42
5.1.2.2.A	Introduction	42
5.1.2.2.B	Void	43
5.1.2.2.0	3GPP2 User Location Information	43
5.1.2.2.0aA	Access Availability Change Reason	43
5.1.2.2.0A	Access Line Identifier	43
5.1.2.2.1	Access Point Name (APN) Network/Operator Identifier	43
5.1.2.2.1A	APN Rate Control	43
5.1.2.2.2	APN Selection Mode	43
5.1.2.2.3	CAMEL Charging Information	43
5.1.2.2.4	CAMEL Information	43
5.1.2.2.5	Cause for Record Closing	45
5.1.2.2.6	Cell Identifier	45
5.1.2.2.7	Charging Characteristics	46
5.1.2.2.8	Charging Characteristics selection mode	46
5.1.2.2.9	Charging ID	47
5.1.2.2.9A	CN Operator Selection Entity	47
5.1.2.2.9Aa	CP CIoT EPS Optimisation Indicator	47
5.1.2.2.9B	Charging per IP-CAN Session Indicator	47
5.1.2.2.10	Destination Number	47
5.1.2.2.11	Diagnostics	47
5.1.2.2.12	Duration	47
5.1.2.2.13	Dynamic Address Flag	48
5.1.2.2.13A	Dynamic Address Flag Extension	48
5.1.2.2.13Aa	Enhanced Diagnostics	48
5.1.2.2.13B	EPC QoS Information	48
5.1.2.2.13C	ePDG Address Used	48
5.1.2.2.13D	ePDG IPv6 Address	48
5.1.2.2.14	Event Time Stamps	48
5.1.2.2.15	Void	48
5.1.2.2.15A	Fixed User Location Information	48
5.1.2.2.16	GGSN Address Used	48
5.1.2.2.16A	Void	48
5.1.2.2.17	IMS Signalling Context	49
5.1.2.2.18	IMSI Unauthenticated Flag	49
5.1.2.2.18A	IP-CAN session Type	49
5.1.2.2.18B	IP-Edge Address IPv6	49
5.1.2.2.18C	IP-Edge Address Used	49
5.1.2.2.18D	IP-Edge Operator Identifier	49
5.1.2.2.18E	Last MS Time Zone	49
5.1.2.2.18F	Last User Location Information	49
5.1.2.2.19	LCS Cause	49
5.1.2.2.20	LCS Client Identity	49
5.1.2.2.21	LCS Client Type	49
5.1.2.2.22	LCS Priority	50
5.1.2.2.23	LCS QoS	50
5.1.2.2.23A	List of RAN Secondary RAT Usage Reports	50
5.1.2.2.24	List of Service Data	50
5.1.2.2.25	List of Traffic Data Volumes	54
5.1.2.2.26	Local Record Sequence Number	57
5.1.2.2.27	Location Estimate	57
5.1.2.2.28	Location Method	57
5.1.2.2.29	Location Type	57
5.1.2.2.29A	Low Priority Indicator	57
5.1.2.2.29B	NBIFOM Mode	57
5.1.2.2.29C	NBIFOM Support	58
5.1.2.2.30	Measurement Duration	58
5.1.2.2.31	Message reference	58
5.1.2.2.32	MLC Number	58
5.1.2.2.32A	MME Name	58
5.1.2.2.32B	MME Realm	58
5.1.2.2.33	MS Network Capability	58
5.1.2.2.34	MS Time Zone	58
5.1.2.2.35	Network Initiated PDP Context	58
5.1.2.2.36	Node ID	58
5.1.2.2.37	Notification to MS user	58
5.1.2.2.37A	Originating Address	58
5.1.2.2.37B	P-GW Address IPv6	58
5.1.2.2.38	P-GW Address Used	58
5.1.2.2.39	P-GW PLMN Identifier	59
5.1.2.2.40	PDN Connection Charging ID	59
5.1.2.2.41	PDP Type	59
5.1.2.2.42	PDP/PDN Type	59
5.1.2.2.42A	PDP/PDN Type Extension	59
5.1.2.2.43	Positioning Data	59
5.1.2.2.43A	Presence Reporting Area Information	59
5.1.2.2.44	Privacy Override	59
5.1.2.2.45	PS Furnish Charging Information	59
5.1.2.2.46	QoS Requested/QoS Negotiated	60
5.1.2.2.46A	RAN End Time	60
5.1.2.2.46B	RAN Start Time	60
5.1.2.2.47	RAT Type	60
5.1.2.2.48	Record Extensions	60
5.1.2.2.49	Record Opening Time	60
5.1.2.2.50	Record Sequence Number	60
5.1.2.2.51	Record Type	61
5.1.2.2.52	Recording Entity Number	61
5.1.2.2.52A	Retransmission	61
5.1.2.2.53	RNC Unsent Downlink Volume	61
5.1.2.2.54	Routing Area Code/Location/Cell Identifier/Change of location	61
5.1.2.2.54A	S-GW Address IPv6	61
5.1.2.2.55	S-GW Address Used	61
5.1.2.2.56	S-GW Change	61
5.1.2.2.56A	Secondary RAT Type	61
5.1.2.2.57	Served 3GPP2 MEID	61
5.1.2.2.57A	Served Fixed Subscriber Id	62
5.1.2.2.58	Served IMEI	62
5.1.2.2.58A	SCS/AS Address	62
5.1.2.2.59	void	62
5.1.2.2.60	Served IMSI	62
5.1.2.2.60A	Served IP-CAN session Address	62
5.1.2.2.60B	Served IP-CAN session Address Extension	62
5.1.2.2.61	Served MN NAI	62
5.1.2.2.62	Served MSISDN	62
5.1.2.2.63	Served PDP Address	62
5.1.2.2.64	Served PDP/PDN Address	62
5.1.2.2.64A	Served PDP/PDN Address Extension	63
5.1.2.2.64B	Served PDP/PDN Address prefix length	63
5.1.2.2.65	Service Centre Address	63
5.1.2.2.66	Serving Node Address	63
5.1.2.2.66A	Serving Node IPv6 Address	63
5.1.2.2.67	Serving Node PLMN Identifier	63
5.1.2.2.68	Serving Node Type	63
5.1.2.2.68A	Serving PLMN Rate Control	63
5.1.2.2.68B	SGi PtP Tunnelling Method	63
5.1.2.2.69	SGSN Address	63
5.1.2.2.69A	Void	64
5.1.2.2.70	SGSN Change	64
5.1.2.2.71	Short Message Service (SMS) Result	64
5.1.2.2.72	Start Time	64
5.1.2.2.73	Stop Time	64
5.1.2.2.73aA 	TDF Address Used	64
5.1.2.2.73bA 	TDF IPv6 Address Used	64
5.1.2.2.73cA 	TDF PLMN Identifier	64
5.1.2.2.73cAa	Traffic Steering Policy Identifier Uplink	64
5.1.2.2.73cAb	Traffic Steering Policy Identifier Downlink	64
5.1.2.2.73dA	TWAG Address Used	64
5.1.2.2.73eA	TWAG IPv6 Address	64
5.1.2.2.73A	TWAN User Location Information	64
5.1.2.2.73B	UNI PDU CP Only Flag	65
5.1.2.2.74	User CSG Information	65
5.1.2.2.75	User Location Information	65
5.1.2.2.75A	User Location Information Time	65
5.1.2.2.76	Void	65
5.1.2.2.77	UWAN User Location Information	65
5.1.2.3	Void	65
5.1.2.4	CP data transfer domain CDR parameters	65
5.1.2.4.1	Introduction	65
5.1.2.4.2	Access Point Name (APN) Network Identifier	65
5.1.2.4.3	APN Rate Control	65
5.1.2.4.4	Cause for Record Closing	66
5.1.2.4.5	Charging Characteristics	66
5.1.2.4.6	Charging Characteristics selection mode	67
5.1.2.4.7	Charging ID	67
5.1.2.4.8	Diagnostics	67
5.1.2.4.9	Duration	68
5.1.2.4.10	 External-Identifier	68
5.1.2.4.11	List of NIDD Submissions	68
5.1.2.4.12	Local Record Sequence Number	68
5.1.2.4.13	Node ID	69
5.1.2.4.14	RAT Type	69
5.1.2.4.15	Record Extensions	69
5.1.2.4.16	Record Opening Time	69
5.1.2.4.17	Record Sequence Number	69
5.1.2.4.18	Record Type	69
5.1.2.4.19	Retransmission	69
5.1.2.4.20	SCEF ID	69
5.1.2.4.21	Served IMSI	69
5.1.2.4.22	Served MSISDN	69
5.1.2.4.23	Serving Node Identity	69
5.1.2.4.24	Serving Node PLMN Identifier	70
5.1.2.4.25	Serving PLMN Rate Control	70
5.1.2.5	Exposure Function API CDR parameters	70
5.1.2.5.1	Introduction	70
5.1.2.5.2	API Content	70
5.1.2.5.3	API Direction	70
5.1.2.5.4	API Identifier	70
5.1.2.5.5	API Invocation Timestamp	70
5.1.2.5.6	API Network Service Node	70
5.1.2.5.7	API Result Code	70
5.1.2.5.8	API Size	70
5.1.2.5.9	Event Timestamp	70
5.1.2.5.10	External Identifier	70
5.1.2.5.11	Local Record Sequence Number	70
5.1.2.5.12	Node Id	70
5.1.2.5.13	Record Extensions	70
5.1.2.5.14	Record Type	71
5.1.2.5.15	Retransmission	71
5.1.2.5.16	SCEF Address	71
5.1.2.5.17	SCEF ID	71
5.1.2.5.18	SCS AS Address	71
5.1.2.5.19	TLTRI	71
5.1.2.5.20	Void	71
5.1.3	Subsystem level CDR parameters	72
5.1.3.0	General	72
5.1.3.1	IMS CDR parameters	72
5.1.3.1.0	Introduction	72
5.1.3.1.1	Access Correlation ID	72
5.1.3.1.2	Access Network Information	72
5.1.3.1.2aA	Access Transfer Type	72
5.1.3.1.2A 	Additional Access Network Information	72
5.1.3.1.3	Alternate Charged Party Address	72
5.1.3.1.3A	AoC Information	73
5.1.3.1.4	Application Provided Called Parties	73
5.1.3.1.5	Application Servers Information	73
5.1.3.1.6	Application Servers involved	73
5.1.3.1.7	Void	73
5.1.3.1.8	Bearer Service	73
5.1.3.1.9	Called Party Address	73
5.1.3.1.10	Carrier Select Routing	73
5.1.3.1.11	Cause for Record Closing	73
5.1.3.1.11A 	Cellular Network Information	73
5.1.3.1.12	Content Disposition	74
5.1.3.1.13	Content Length	74
5.1.3.1.14	Content Type	74
5.1.3.1.15	Event	74
5.1.3.1.16	Expires	74
5.1.3.1.16aA	FE Identifier List	74
5.1.3.1.16A	From Address	74
5.1.3.1.17	GGSN Address	74
5.1.3.1.18	GPRS Charging ID	74
5.1.3.1.18A	Void	74
5.1.3.1.19	IMS Charging Identifier	74
5.1.3.1.20	IMS Communication Service Identifier	75
5.1.3.1.20A	IMS Emergency Indicator	75
5.1.3.1.20B	IMS Visited Network Identifier	75
5.1.3.1.21	Incomplete CDR Indication	75
5.1.3.1.21A	Initial IMS Charging Identifier	75
5.1.3.1.21Aa	Instance Id	75
5.1.3.1.21Aaa	Inter-UE Transfer	75
5.1.3.1.21B	IP Realm Default Indication	75
5.1.3.1.21C	ISUP Cause	76
5.1.3.1.21Ca 	List of Access Network Info Change	76
5.1.3.1.21D 	List of Access Transfer Information	76
5.1.3.1.22	List of Associated URI	76
5.1.3.1.23	List of Called Asserted Identity	76
5.1.3.1.23A	List of Called Identity Changes	76
5.1.3.1.24	List of Calling Party Address	77
5.1.3.1.25	List of Early SDP Media Components	77
5.1.3.1.26	List of Inter Operator Identifiers	77
5.1.3.1.27	List of Message Bodies	77
5.1.3.1.27A	List of NNI Information	77
5.1.3.1.28	List of SDP Media Components	78
5.1.3.1.28A	List of Reason Header	78
5.1.3.1.28B	Local GW Inserted Indication	78
5.1.3.1.29	Local Record Sequence Number	78
5.1.3.1.30	Media Initiator Flag	78
5.1.3.1.31	Media Initiator Party	78
5.1.3.1.31a	MS Time Zone	78
5.1.3.1.31aA	MSC Address	78
5.1.3.1.31A	Neighbour Node Address	79
5.1.3.1.31B	NNI Type	79
5.1.3.1.31C	Void	79
5.1.3.1.32	Node Address	79
5.1.3.1.33	Number Portability Routing	79
5.1.3.1.33A	Void	79
5.1.3.1.34	Online Charging Flag	79
5.1.3.1.35	Originator	79
5.1.3.1.35A	Outgoing Session ID	79
5.1.3.1.36	Private User ID	79
5.1.3.1.37	Real Time Tariff Information	79
5.1.3.1.38	Record Closure Time	79
5.1.3.1.39	Record Extensions	80
5.1.3.1.40	Record Opening Time	80
5.1.3.1.41	Record Sequence Number	80
5.1.3.1.42	Record Type	80
5.1.3.1.42A	Related IMS Charging Identifier	80
5.1.3.1.42B	Related IMS Charging Identifier Generation Node	80
5.1.3.1.42A	Relationship Mode	80
5.1.3.1.43	Requested Party Address	80
5.1.3.1.44	Retransmission	80
5.1.3.1.45	Role of Node	80
5.1.3.1.45A	Route header received	80
5.1.3.1.45B	Route header transmitted	80
5.1.3.1.46	SDP Answer Timestamp	81
5.1.3.1.47	SDP Media Components	81
5.1.3.1.48	SDP Media Description:	81
5.1.3.1.49	SDP Media Name	81
5.1.3.1.50	SDP Offer Timestamp	81
5.1.3.1.51	SDP Session Description	81
5.1.3.1.52	SDP Type	82
5.1.3.1.53	Served Party IP Address	82
5.1.3.1.54	Service Delivery End Time Stamp	82
5.1.3.1.54A	Service Delivery End Time Stamp Fraction	82
5.1.3.1.55	Service Delivery Start Time Stamp	82
5.1.3.1.55A	Service Delivery Start Time Stamp Fraction	82
5.1.3.1.56	Service ID	82
5.1.3.1.57	Service Reason Return Code	82
5.1.3.1.58	Service Request Timestamp	82
5.1.3.1.58A	Service Request Timestamp Fraction	82
5.1.3.1.58B	Session Direction	83
5.1.3.1.59	Session ID	83
5.1.3.1.60	Session Priority	83
5.1.3.1.61	SIP Method	83
5.1.3.1.62	SIP Request Timestamp	83
5.1.3.1.63	SIP Request Timestamp Fraction	83
5.1.3.1.64	SIP Response Timestamp	83
5.1.3.1.65	SIP Response Timestamp Fraction	83
5.1.3.1.66	S-CSCF Information	83
5.1.3.1.66A	Status	83
5.1.3.1.66B	TAD Identifier	83
5.1.3.1.67	Tariff Information	83
5.1.3.1.68	Tariff XML	83
5.1.3.1.68A	Transcoder Inserted Indication	83
5.1.3.1.68B	Transit IOI List	84
5.1.3.1.69	Trunk Group ID Incoming/Outgoing	84
5.1.3.1.69A	User Location Information	84
5.1.3.1.70	VLR Number	84
5.1.4	Service level CDR parameters	85
5.1.4.1	MMS CDR parameters	85
5.1.4.1.0	Introduction	85
5.1.4.1.1	3GPP MMS Version	85
5.1.4.1.2	Access Correlation	85
5.1.4.1.3	Acknowledgement Request	85
5.1.4.1.4	Attributes List	85
5.1.4.1.5	Billing Information	85
5.1.4.1.6	Charge Information	85
5.1.4.1.7	Content Type	86
5.1.4.1.8	Delivery Report Requested	86
5.1.4.1.9	Duration of Transmission	86
5.1.4.1.10	Earliest Time of Delivery	86
5.1.4.1.11	Forward Counter	86
5.1.4.1.12	Forwarding Address	86
5.1.4.1.13	Forwarding MMS Relay/Server Address	86
5.1.4.1.14	Limit	86
5.1.4.1.15	Linked ID	86
5.1.4.1.16	Local Record Sequence Number	86
5.1.4.1.17	Managing Address	86
5.1.4.1.18	Message Class	87
5.1.4.1.19	Message Distribution Indicator	87
5.1.4.1.20	Message ID	87
5.1.4.1.21	Message Reference	87
5.1.4.1.22	Message selection	87
5.1.4.1.23	Message Size	87
5.1.4.1.24	MMBox Storage Information	87
5.1.4.1.25	MM component list	87
5.1.4.1.26	MM Date and Time	87
5.1.4.1.27	MM Listing	88
5.1.4.1.28	MM Status Code	88
5.1.4.1.28A	MS Time Zone	88
5.1.4.1.29	MSCF Information	88
5.1.4.1.30	Originator Address	88
5.1.4.1.31	Originator MMS Relay/Server Address	88
5.1.4.1.32	Priority	88
5.1.4.1.33	Quotas	88
5.1.4.1.34	Quotas requested	88
5.1.4.1.35	Read Reply Requested	88
5.1.4.1.36	Read Status	88
5.1.4.1.37	Recipient Address	88
5.1.4.1.38	Recipient MMS Relay/Server Address	89
5.1.4.1.39	Recipients Address List	89
5.1.4.1.40	Record Extensions	89
5.1.4.1.41	Record Time Stamp	89
5.1.4.1.42	Record Type	89
5.1.4.1.43	Reply Charging	89
5.1.4.1.44	Reply Charging ID	89
5.1.4.1.45	Reply Charging Size	89
5.1.4.1.46	Reply Deadline	89
5.1.4.1.47	Report allowed	90
5.1.4.1.48	Request Status code	90
5.1.4.1.49	Routeing Address	90
5.1.4.1.50	Routeing Address List	90
5.1.4.1.51	Sender Address	90
5.1.4.1.52	Sender Visibility	90
5.1.4.1.53	Service code	90
5.1.4.1.54	Start	90
5.1.4.1.55	Status Text	90
5.1.4.1.56	Submission Time	90
5.1.4.1.57	Time of Expiry	90
5.1.4.1.58	Totals	90
5.1.4.1.59	Totals requested	90
5.1.4.1.60	Upload Time	91
5.1.4.1.61	VAS ID	91
5.1.4.1.62	VASP ID	91
5.1.4.2	LCS CDR parameters	91
5.1.4.2.0	Introduction	91
5.1.4.2.1	Home GMLC Identity	91
5.1.4.2.2	LCS Client Identity	91
5.1.4.2.3	LCS Client Type	91
5.1.4.2.4	LCS Priority	91
5.1.4.2.5	Location Estimate	91
5.1.4.2.6	Location Type	91
5.1.4.2.7	Positioning Data	91
5.1.4.2.8	Provider Error	91
5.1.4.2.9	Requesting GMLC Identity	91
5.1.4.2.10	Result code	91
5.1.4.2.11	Target IMSI	92
5.1.4.2.12	Target MSISDN	92
5.1.4.2.13	User Error	92
5.1.4.2.14	Visited GMLC Identity	92
5.1.4.3	PoC CDR parameters	92
5.1.4.3.0	Introduction	92
5.1.4.3.1	Called Party Address	92
5.1.4.3.2	Charged Party	92
5.1.4.3.3	List of Talk Burst Exchange	93
5.1.4.3.4	Number of participants	93
5.1.4.3.5	Participant Access Priority	93
5.1.4.3.6	Participants involved	93
5.1.4.3.7	PoC controlling address	93
5.1.4.3.8	PoC Event Type	93
5.1.4.3.9	PoC group name	93
5.1.4.3.10	PoC session id	93
5.1.4.3.11	PoC session initiation type	94
5.1.4.3.12	PoC session type	94
5.1.4.3.13	User location info	94
5.1.4.3.14	User Participating Type	94
5.1.4.4	MBMS CDR parameters	94
5.1.4.4.0	Introduction	94
5.1.4.4.1	CN IP Multicast Distribution	94
5.1.4.4.2	MBMS 2G 3G Indicator	94
5.1.4.4.2A	MBMS Data Transfer Start	94
5.1.4.4.2B	MBMS Data Transfer Stop	94
5.1.4.4.3	MBMS GW Address	94
5.1.4.4.4	MBMS Service Area	94
5.1.4.4.5	MBMS Service Type	94
5.1.4.4.6	MBMS Session Identity	95
5.1.4.4.7	Required MBMS Bearer Capabilities	95
5.1.4.4.8	TMGI	95
5.1.4.5	MMTel CDR parameters	95
5.1.4.5.0	Introduction	95
5.1.4.5.1	Associated Party Address	95
5.1.4.5.2	List of Supplementary services	95
5.1.4.5.3 	Number Of Diversions	96
5.1.4.5.4 	Participant Action Type	96
5.1.4.5.5	Service Mode	96
5.1.4.5.6	Service Type	96
5.1.4.5.7	Void	96
5.1.4.6	SMS CDR parameters	96
5.1.4.6.0	Introduction	96
5.1.4.6.1	Event Timestamp	96
5.1.4.6.0A	Carrier Select Routing	96
5.1.4.6.1A	External Identifier	96
5.1.4.6.2	Local Record Sequence Number	96
5.1.4.6.3	Message Class	96
5.1.4.6.4	Message Reference	97
5.1.4.6.5	Message Size	97
5.1.4.6.6	MTC IWF Address	97
5.1.4.6.6A	Number Portability Routing	97
5.1.4.6.7	Originator IMSI	97
5.1.4.6.8	Originator Info	97
5.1.4.6.9	Originator MSISDN	97
5.1.4.6.10	Originator Other Address	97
5.1.4.6.11	Originator Received Address	97
5.1.4.6.12	Originator SCCP Address	97
5.1.4.6.12A	PDP Address	97
5.1.4.6.13	RAT Type	98
5.1.4.6.14	Recipient IMSI	98
5.1.4.6.15	Recipient Info	98
5.1.4.6.16	Recipient MSISDN	98
5.1.4.6.17	Recipient Other Address	98
5.1.4.6.18	Recipient Received Address	98
5.1.4.6.19	Recipient SCCP Address	98
5.1.4.6.20	Record Type	98
5.1.4.6.21	Record Extensions	98
5.1.4.6.22	Served IMEI	98
5.1.4.6.22A	Session ID	98
5.1.4.6.23	SM Data Coding Scheme	99
5.1.4.6.24	SM Delivery Report Requested	99
5.1.4.6.25	SM Destination Interface	99
5.1.4.6.26	SM Device Trigger Indicator	99
5.1.4.6.27	SM Device Trigger information	99
5.1.4.6.28	SM Discharge Time	99
5.1.4.6.29	SM DT Priority Indication	99
5.1.4.6.30	SM DT Reference Number	99
5.1.4.6.31	SM DT Validity Period	99
5.1.4.6.32	SM Message Type	99
5.1.4.6.33	SM Originator Interface	99
5.1.4.6.34	SM Originator Protocol Id	100
5.1.4.6.35	SM Priority	100
5.1.4.6.36	SM Recipient Protocol Id	100
5.1.4.6.37	SM Reply Path Requested	100
5.1.4.6.38	SMS Application Port ID	100
5.1.4.6.39	SM Sequence Number	100
5.1.4.6.40	SM Serving Node	100
5.1.4.6.41	Void	100
5.1.4.6.42	Void	100
5.1.4.6.43	SM Status	100
5.1.4.6.44	SM Total Number	100
5.1.4.6.45	SM User Data Header	100
5.1.4.6.45A	SMS Node Address	100
5.1.4.6.45B	SMS Result	100
5.1.4.6.46	Submission Time	100
5.1.4.6.47	UE Time Zone	101
5.1.4.6.48	User Location Info	101
5.1.4.7	ProSe CDR parameters	101
5.1.4.7.0	Introduction	101
5.1.4.7.0A	Announcing PLMN ID	101
5.1.4.7.1	Announcing UE HPLMN Identifier	101
5.1.4.7.2	Announcing UE VPLMN Identifier	101
5.1.4.7.3	Application ID	101
5.1.4.7.4	Cause for Record Closing	101
5.1.4.7.5	Direct Discovery Model	101
5.1.4.7.5A	Discoveree UE HPLMN Identifier	101
5.1.4.7.5B	Discoveree UE VPLMN Identifier	101
5.1.4.7.5C	Discoverer UE HPLMN Identifier	101
5.1.4.7.5D 	Discoverer UE VPLMN Identifier	102
5.1.4.7.6	Layer two Group ID	102
5.1.4.7.6A	List of Application Specific Data	102
5.1.4.7.6B	List of Coverage Info	102
5.1.4.7.6C	List of Radio Parameter Sets	102
5.1.4.7.7	List of Reception Data Containers and List of Transmission Data Containers	102
5.1.4.7.7A	List of Transmitters	103
5.1.4.7.8	Monitored PLMN Identifier	103
5.1.4.7.9	Monitoring UE PLMN Identifier	103
5.1.4.7.10	Monitoring UE Identifier	103
5.1.4.7.11	Monitoring UE VPLMN Identifier	103
5.1.2.7.12	Node ID	103
5.1.4.7.13	PC Three Control Protocol Cause	103
5.1.4.7.14	PC Three EPC Control Protocol Cause	103
5.1.4.7.14A	PC5 Radio Technology	103
5.1.4.7.15	ProSe Application ID	103
5.1.4.7.16	ProSe Event Type	103
5.1.4.7.17	ProSe Function ID	103
5.1.4.7.18	ProSe Function IP Address	104
5.1.4.7.19	ProSe Function PLMN Identifier	104
5.1.4.7.20	ProSe Group IP multicast address	104
5.1.4.7.21	ProSe Reason for Cancellation	104
5.1.4.7.22	ProSe Request Timestamp	104
5.1.4.7.22A	ProSe Target Layer-2 ID	104
5.1.4.7.23	ProSe UE ID	104
5.1.4.7.23A	ProSe UE-to-Network Relay UE ID	104
5.1.4.7.24	Proximity Alert Indication	104
5.1.4.7.25	Proximity Alert Timestamp	104
5.1.4.7.26	Proximity Cancellation Timestamp	104
5.1.4.7.27	Proximity Request Renewal Info Block List	104
5.1.4.7.28	Range Class	105
5.1.4.7.29	Reason for Cancellation	105
5.1.4.7.30	Record Type	105
5.1.4.7.30A	Relay IP address	105
5.1.4.7.31	Requested Application Layer User ID	105
5.1.4.7.32	Requested PLMN Identifier	105
5.1.4.7.33	Requestor Application Layer User ID	105
5.1.4.7.34	Requestor EPC ProSe User ID	105
5.1.4.7.35	Requestor PLMN Identifier	105
5.1.4.7.36	Role Of ProSe Function	105
5.1.4.7.37	Role Of UE	105
5.1.4.7.38	Source IP address	105
5.1.4.7.38a	Target IP address	106
5.1.4.7.38A	Time of First Reception	106
5.1.4.7.38B	Time of First Transmission	106
5.1.4.7.39	Time Window	106
5.1.4.7.40	UE Location	106
5.1.4.7.41	Validity Period	106
5.1.4.7.42	WLAN Link Layer ID	106
5.1.4.8	Monitoring Event CDR parameters	106
5.1.4.8.0	Introduction	106
5.1.4.8.1	Accuracy	106
5.1.4.8.2	Chargeable Party Identifier	106
5.1.4.8.3	Event Timestamp	106
5.1.4.8.4	List of Locations	106
5.1.4.8.5	List of Monitoring Event Report Data	106
5.1.4.8.6	Local Record Sequence Number	107
5.1.4.8.7	Location Type	107
5.1.4.8.8	Maximum Detection Time	108
5.1.4.8.9	Maximum Number of Reports	108
5.1.4.8.10	Monitored User	108
5.1.4.8.11	Monitoring Duration	108
5.1.4.8.12	Monitoring Event Config Status	108
5.1.4.8.13	Monitoring Event Configuration Activity	108
5.1.4.8.14	Monitoring Type	108
5.1.4.8.15 	Node ID	108
5.1.4.8.16	Reachability Configuration	108
5.1.2.8.17	Record Opening Time	108
5.1.2.8.18	Record Type	108
5.1.2.8.19	 Retransmission	109
5.1.4.8.20	SCEF ID	109
5.1.4.8.21	SCEF Reference ID	109
5.1.5	Common charging data in CHF-CDR	109
5.1.5.0	CHF record (CHF-CDR)	109
5.1.5.1	CHF CDR parameters	111
5.1.5.1.1	Introduction	111
5.1.5.1.2	Cause for Record Closing	111
5.1.5.1.3	Duration	111
5.1.5.1.4	List of Multiple Unit Usage	111
5.1.5.1.5	Local Record Sequence Number	112
5.1.5.1.6	NF Consumer Information	112
5.1.5.1.7	Rating Group	112
5.1.5.1.8	Record Opening Time	112
5.1.5.1.9	Record Sequence Number	112
5.1.5.1.10	Record Type	112
5.1.5.1.11	Recording Network Function ID	112
5.1.5.1.12	Record Extensions	112
5.1.5.1.13	Subscriber Identifier	112
5.1.5.1.14	Used Unit Container	113
5.1.5.1.15	User Location Information	113
5.1.5.1.16	Service Specification Information	113
5.1.5.1.17	RAT Type	113
5.1.5.1.18	User Equipment (UE) Info	113
5.2	CDR abstract syntax specification	114
5.2.1	Generic ASN.1 definitions	114
5.2.2	Bearer level CDR definitions	124
5.2.2.0	General	124
5.2.2.1	CS domain CDRs	124
5.2.2.2	PS domain CDRs	144
5.2.2.3	Void	163
5.2.2.4	CP data transfer domain CDRs	163
5.2.2.5	Exposure Function API CDRs	165
5.2.3	Subsystem level CDR definitions	167
5.2.3.0	Introduction	167
5.2.3.1	IMS CDRs	167
5.2.4	Service level CDR definitions	181
5.2.4.0	General	181
5.2.4.1	MMS CDRs	181
5.2.4.2	LCS CDRs	193
5.2.4.3	PoC CDRs	195
5.2.4.4	MBMS CDRs	199
5.2.4.5	MMTel CDRs	200
5.2.4.6	SMS CDRs	203
5.2.4.7	ProSe CDRs	208
5.2.4.8	Monitoring Event CDRs	212
5.2.5	Charging Function domain CDRs	216
5.2.5.1	General	216
5.2.5.2	CHF CDRs	216
6	CDR encoding rules	234
6.0	Introduction	234
6.1	3GPP standardized encodings	234
6.2	Encoding version indication	234
Annex A (informative): Void	235
Annex B (informative): Bibliography	236
Annex C (informative): ASN.1 Cross-reference listing and fully expanded sources	237
Annex D (informative): Change history	238


Foreword
This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x	the first digit:
1	presented to TSG for information;
2	presented to TSG for approval;
3	or greater indicates TSG approved document under change control.
y	the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.
z	the third digit is incremented when editorial only changes have been incorporated in the document.
1	Scope
The present document is part of a series of Technical Specifications (TSs) that specify charging functionality and charging management in 3GPP networks. The 3GPP core network charging architecture and principles are specified in document TS 32.240 [1], which provides an umbrella for other charging management documents that specify:
-	the content of the CDRs per domain and subsystem (offline and converged charging);
-	the content of real-time charging events per domain/subsystem (online and converged charging);
-	the functionality of online, offline and converged charging for those domains and subsystems;
-	the interfaces that are used in the charging framework to transfer the charging information 
(i.e. CDRs or charging events).
The present document specifies the CDR parameters, the abstract syntax and encoding rules for all the CDR types that are defined in the charging management TSs described above. The mechanisms used to transfer the CDRs from the generating node to the operator's Billing Domain (e.g. the billing system or a mediation device) are specified in TS 32.297 [52]. Further details with respect to internal functions of the operator's Billing Domain are out of scope of 3GPP standardisation.
The present document is related to other 3GPP charging TSs as follows: 
-	The common 3GPP charging architecture is specified in TS 32.240 [1].
-	A transaction based mechanism for the transfer of CDRs within the network is specified in TS 32.295 [54].
-	The file based mechanism used to transfer the CDRs from the network to the operator's billing domain (e.g. the billing system or a mediation device) is specified in TS 32.297 [52].
-	The 3GPP Diameter applications used for offline and online charging are specified in TS 32.299 [50].
-	The services, operations and procedures of charging, using Service Based Interface are specified in TS 32.290 [57].
-	The charging service of 5G system is specified in TS 32.291 [58]. 
All terms, definitions and abbreviations used in the present document, that are common across 3GPP TSs, are defined in the 3GPP Vocabulary, TR 21.905 [100]. Those that are common across charging management in 3GPP domains or subsystems are provided in the umbrella document TS 32.240 [1] and are copied into clause 3 of the present document for ease of reading. Finally, those items that are specific to the present document are defined exclusively in the present document.
Furthermore, requirements that govern the charging work are specified in TS 22.115 [101].
2	References
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
-	References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
-	For a specific reference, subsequent revisions do not apply.
-	For a non-specific reference, the latest version applies.  In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]	3GPP TS 32.240: "Telecommunication management; Charging management; Charging Architecture and Principles".
[2] - [9]	Void.
[10]	3GPP TS 32.250: "Telecommunication management; Charging management; Circuit Switched (CS) domain charging".
[11]	3GPP TS 32.251: "Telecommunication management; Charging management; Packet Switched (PS) domain charging".
[12] 	Void.
[13] 	3GPP TS 32.253: "Telecommunication management; Charging management; Control Plane (CP) data transfer domain charging".
[14]	 3GPP TS 32.254: "Telecommunication management; Charging management; Exposure function Northbound Application Program Interfaces (APIs) charging ".
[15]	3GPP TS 32.255: "Telecommunication management; Charging management; 5G Data connectivity domain charging; stage 2".
[16]	3GPP TS 32.256: "Telecommunication management; Charging management; 5G connection and mobility domain charging; stage 2".
[17] - [19]	Void.
[20]	3GPP TS 32.260: "Telecommunication management; Charging management; IP Multimedia Subsystem (IMS) charging".
[21] - [29]	Void.
[30]	3GPP TS 32.270: "Telecommunication management; Charging management; Multimedia Messaging Service (MMS) charging".
[31]	3GPP TS 32.271: "Telecommunication management; Charging management; Location Services (LCS) charging".
[32]	3GPP TS 32.272: "Telecommunication management; Charging management; Push-to-talk over Cellular (PoC) charging".
[33]	3GPP TS 32.273: "Telecommunication management; Charging management; Multimedia Broadcast and Multicast Service (MBMS) charging".
[34]	3GPP TS 32.274: "Telecommunication management; Charging management; Short Message Service (SMS) charging".
[35]	3GPP TS 32.275: "Telecommunication management; Charging management; MultiMedia Telephony (MMTel) charging".
[36]	Void.
[37]	3GPP TS 32.277: "Telecommunication management; Charging management; Proximity-based Services (ProSe) charging".
[38]	3GPP TS 32.278: "Telecommunication management; Charging management; Monitoring Event charging".
[39]	void
[40]	3GPP TS 32.280: "Telecommunication management; Charging management; Advice of Charge (AoC) service".
[41] - [49]	Void.
[50]	3GPP TS 32.299: "Telecommunication management; Charging management; Diameter charging application".
[51]	Void.
[52]	3GPP TS 32.297: "Telecommunication management; Charging management; Charging Data Records (CDR) file format and transfer".
[53] - [56]	Void.
[57]	3GPP TS 32.290: "Telecommunication management; Charging management; 5G system; Services, operations and procedures of charging using Service Based Interface (SBI)". 
[58]	3GPP TS 32.291: "Telecommunication management; Charging management; 5G system; Charging service, stage 3".
[59]- [69]	Void.
[70]	3GPP TS 28.201: "Charging management; Network slice performance and analytics charging in the 5G System (5GS); Stage 2".
[71]	3GPP TS 28.202: "Charging management; Network slice management charging in the 5G System (5GS); Stage 2".
[72]- [99]	Void.
[100]	3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[101]	3GPP TS 22.115: "Service aspects; Charging and billing".
[102]	3GPP TS 22.002: "Circuit Bearer Services (BS) supported by a Public Land Mobile Network (PLMN)".
[103]	3GPP TS 22.004: "General on supplementary services".
[104] 	3GPP TS 22.024: "Description of Charge Advice Information (CAI)".
[105] – [199]	void
[200]	3GPP TS 23.003: "Numbering, Addressing and Identification".
[201]	3GPP TS 23.040: "Technical realization of Short Message Service (SMS)".
[202]	3GPP TS 23.060: "General Packet Radio Service (GPRS) Service description; Stage 2".
[203]	3GPP TS 23.203: "Policy and Charging control architecture".
[204]	3GPP TS 23.207: "End-to-end Quality of Service (QoS) concept and architecture".
[205]	Void.
[206]	3GPP TS 23.140: "Multimedia Messaging Service (MMS); Functional description; Stage 2".
[207]	3GPP TS 23.172: "Technical realization of Circuit Switched (CS) multimedia service; UDI/RDI fallback and service modification; Stage 2".
[208]	3GPP TS 24.008: "Mobile radio interface Layer 3 specification; Core network protocols; Stage 3".
[209]	3GPP TS 24.080: "Mobile radio Layer 3 supplementary service specification; Formats and coding".  
[210]	3GPP TS 24.229: "Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3".
[211]	3GPP TS 24.604: "Communication Diversion (CDIV) using IP Multimedia (IM); Protocol specification".
[212]	3GPP TS 25.413: "UTRAN Iu interface Radio Access Network Application Part (RANAP) signalling".
[213]	3GPP TS 27.001: "General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)".
[214]	3GPP TS 29.002: "Mobile Application Part (MAP) specification".
[215]	3GPP TS 29.060: "General Packet Radio Service (GPRS); GPRS Tunnelling Protocol (GTP) across the Gn and Gp interface".
[216]	3GPP TS 29.061: "Interworking between the Public Land Mobile Network (PLMN) supporting packet based services and Packet Data Networks (PDN)".
[217]	3GPP TS 29.078: "Customised Applications for Mobile network Enhanced Logic (CAMEL); CAMEL Application Part (CAP) specification".
[218]	3GPP TS 29.140: "Multimedia Messaging Service (MMS); MM10 interface Diameter based protocol; Stage 3".
[219]	3GPP TS 29.207: "Policy control over Go interface".
[220]	3GPP TS 29.212: "Policy and Charging control over Gx reference point". 
[221]	3GPP TS 29.214: "Policy and Charging Control; Reference points".
[222]	3GPP TS 29.272: "Mobility Management Entity (MME) and Serving GPRS Support Node (SGSN) related interfaces based on Diameter protocol".
[223]	3GPP TS 29.274: "Evolved GPRS Tunnelling Protocol for Control Plane (GTPv2-C); Stage 3".
[224]	3GPP TS 29.275: " Proxy Mobile IPv6 (PMIPv6) based Mobility and Tunnelling protocols;    Stage 3".
[225]	3GPP TS 29.658: "SIP Transfer of IP Multimedia Service Tariff Information". 
[226] 	3GPP TS 36.413 "Evolved Universal Terrestrial Radio Access (E-UTRA); S1 Application Protocol (S1AP)".
[227]	3GPP TS 49.031: "Location Services (LCS); Base Station System Application Part LCS Extension (BSSAP-LE)".
[228] 	3GPP TS 32.015: "Telecommunication management; Charging management; Charging data description for the Packet Switched (PS) domain".
[229] 	3GPP TS 23.292: "IP Multimedia Subsystem (IMS) Centralized Services".
[230] 	3GPP TS 29.338: "Diameter based protocols to support SMS capable MMEs".
[231]	3GPP TS 29.337: "Diameter-based T4 interface for communications with packet data networks and applications". 
[232]	3GPP TS 29.229: "Cx and Dx Interfaces based on the Diameter protocol; Protocol Details".
[233]	3GPP TS 29.520: "5G System; Network Data Analytics Services; Stage 3".
[234] 	void
[235]	3GPP TS 23.303: "Proximity-based services (ProSe)".
[236]	3GPP TS 24.334: "Proximity-services (ProSe) User Equipment (UE) to ProSe function protocol aspects".
[237] 	3GPP TS 23.682: "Architecture enhancements to facilitate communications with packet data networks and applications".
[238] - [240] 	Void.
[241]	3GPP TS 36.331: "Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification".
[242]	3GPP TS 29.328: "IP Multimedia (IM) Subsystem Sh Interface; Signalling flows and message contents".
[243]	3GPP TS 23.682: "Architecture enhancements to facilitate communications with packet data networks and applications".
[244]	3GPP TS 29.128: "Mobility Management Entity (MME) and Serving GPRS Support Node (SGSN) interfaces for interworking with packet data networks and applications".
[245]	3GPP TS 23.401: "General Packet Radio Service (GPRS) enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTRAN) access".
[246]	3GPP TS 23.503:"Policy and Charging Control Framework for the 5G System; Stage 2".
[247]	3GPP TS 23.501:"System Architecture for the 5G System".
[248]	3GPP TS 29.501: "5G System; Principles and Guidelines for Services Definition; Stage 3".
[249]	3GPP TS 29.571: "5G System; Common Data Types for Service Based Interfaces; Stage 3".
[250]	3GPP TS 29.502: "5G System; Session Management Services; Stage 3".
[251]	3GPP TS 29.512: "5G System; Session Management Policy Control Service; Stage 3".
[252] - [253] 	Void
[254]	3GPP TS 28.541: "Management and orchestration; 5G Network Resource Model (NRM); Stage 2 and stage 3".
[255] - [299] 	Void
[300]	ITU-T Recommendation X.680 | ISO/IEC 8824-1: "Information technology; Abstract Syntax Notation One (ASN.1): Specification of Basic Notation".
[301]	ITU-T Recommendation X.690 | ISO/IEC 8825-1: "Information technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)".
[302]	ITU-T Recommendation X.691 | ISO/IEC 8825-2: "Information technology - ASN.1 encoding rules: Specification of Packed Encoding Rules (PER)".
[303]	ITU-T Recommendation X.693 | ISO/IEC 8825-4: "Information technology - ASN.1 encoding rules: XML encoding rules (XER)".
[304]	ITU-T Recommendation X.711 CMIP:"Information technology – Open Systems Interconnection – Common Management Information Protocol".
[305]	ITU-T Recommendation X.721 ISO/IEC 10165-2: " Information technology - Open Systems Interconnection - Structure of management information: Definition of management information".
[306]	ITU-T Recommendation X.227 ACSE: " Information technology - Open Systems Interconnection – Connection-oriented protocol for the Association Control Service Element: Protocol specification ".
[307]	ITU-T Recommendation Q.773: "Transaction capabilities formats and encoding".
[308]	ITU-T Recommendation E.164: "The international public telecommunication numbering plan".
[309]	ITU-T Recommendation Q.767: "Application of the ISDN user part of CCITT signalling system No. 7 for international ISDN interconnections".
[310]	ETS 300 196: "Digital Subscriber Signalling System No. one (DSS1) protocol".
[311]	OMA Location Working Group "Mobile Location Protocol Specification", [http://www.openmobilealliance.org].
[312]	ETSI GSM 05.01: "Digital Cellular Telecommunications System (Phase 2+); Physical Layer on the Radio Path; General Description".
[313]	ETSI GSM 08.08: "European Digital Cellular Telecommunication System (Phase 2); Mobile-Services Switching Centre - Base Station System (MSC - BSS) Interface Layer 3 Specification".
[314]	ETSI TS 283 034 v2.2.0: "Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Network Attachment Sub-System (NASS); e4 interface based on the DIAMETER protocol".
[315]	ITU-T Recommendation X.121: " International numbering plan for public data networks ".
[316] – [399]	void
[400]	IETF RFC 822 (1982): "Standard for the format of arpa internet text messages".
[401]	IETF RFC 3261(2002): "SIP: Session Initiation Protocol".
[402]	IETF RFC 3966 (2004): "The tel URI for Telephone Numbers".
[403]	IETF RFC 3265 (2002): "Session Initiation Protocol (SIP)-Specific Event Notification".
[404]	IETF RFC 7315 (2014): "Private Header (P-Header) Extensions to the Session Initiation Protocol (SIP) for the 3rd-Generation Partnership Project (3GPP)".
[405]	IETF RFC 2486 (1999): "The Network Access Identifier".
[406]	IETF RFC 4566 (2006): "SDP: Session Description Protocol".
[407]	IETF RFC 5031 (2008): "A Uniform Resource Name (URN) for Emergency and Other Well-Known Services".
[408]	IEEE Std 802.11-2012™: "IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications".
[409]	IETF RFC 4776 (2006): "Dynamic Host Configuration Protocol (DHCPv4 and DHCPv6) Option for Civic Addresses Configuration Information".
[410]	IETF RFC 4122 (200): "A Universally Unique IDentifier (UUID) URN Namespace".
[411]	IETF RFC 1166: "Internet Numbers".
[412]	IETF RFC 5952: "A recommendation for IPv6 address text representation".
[413] – [600]	void
[601]	Broadband Forum TR-134: "Broadband Policy Control Framework (BPCF)". 
3	Definitions of terms, symbols and abbreviations
3.1	Terms
For the purposes of the present document, the terms and definitions given in TR 21.905 [100], TS 32.240 [1] and TS 32.297 [42] as well as the following apply:
Billing Domain (BD): part of the operator network, which is outside the core network, which receives and processes CDR files from the core network charging functions. It includes functions that can provide billing mediation and billing or other (e.g. statistical) end applications. It is only applicable to offline charging (see "Online Charging System" for equivalent functionality in online charging).
Charging Data Record (CDR): formatted collection of information about a chargeable event (e.g. time of call set-up, duration of the call, amount of data transferred, etc) for use in billing and accounting. For each party to be charged for parts of or all charges of a chargeable event a separate CDR is generated, i.e. more than one CDR may be generated for a single chargeable event, e.g. because of its long duration, or because more than one charged party is to be charged.
offline charging: charging mechanism where charging information does not affect, in real-time, the service rendered.
online charging: charging mechanism where charging information can affect, in real-time, the service rendered and therefore a direct interaction of the charging mechanism with bearer/session/service control is required.
3.2	Symbols
For the purposes of the present document, the following symbols as specified in TR 21.905 [100], TS 32.240 [1], 
TS 32.297 [52], TS 23.060 [202] and the following apply:
Bx	The Interface between a Charging Gateway Function (CGF) and the Billing Domain (BD)
Bns	Reference point for the CDR file transfer from the Network slice CGF to the BD.
Ga	Interface between a node transmitting CDRs (i.e. CDF) and a CDR receiving functionality (CGF)
Gn	Interface between two GSNs within the same PLMN.
Gp	Interface between two GSNs in different PLMNs. The Gp interface allows support of GPRS network services across areas served by the co-operating GPRS PLMNs.
Rf	Offline Charging Reference Point between a Charging Trigger Function (CTF) and the Charging Data Function (CDF)
3.3	Abbreviations
For the purposes of the present document, the abbreviations given in TR 21.905 [100] and the following apply. 
An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 [100].
5GS	5G System
3GPP	3rd Generation Partnership Project 
ADC	Application Detection and Control
ATSSS	Access Traffic Steering, Switching, Splitting
ASN.1	Abstract Syntax Notation One
BD	Billing Domain
BER	Basic Encoding Rules
CS	Circuit Switched
CDF	Charging Data Function
CDIV	Communication Diversion
CDR	Charging Data Record
CEF	Charging Enablement Function
CGF	Charging Gateway Function 
CIoT		Cellular Internet of Things
CP	Control Plane
CPCN	Control Plane data transfer Charging Node (MME, SCEF, IWK-SCEF)
CSG	Closed Subscriber Group
CSG ID	Closed Subscriber Group Identity
CTF	Charging Trigger Function
FBC	Flow Based Charging
GPRS	General Packet Radio Service 
ISC	IMS Service Control
IM	IP Multimedia
IMS	IM Subsystem
IMS-AGW	IMS Access Media Gateway
ISO	International Organisation for Standardisation
ITU	International Telecommunication Union
IP	Internet Protocol
IWK-SCEF	Interworking SCEF
LAN	Local Area Network
LCS	LoCation Service
MCC	Mobile Country Code
MME	Mobility Management Entity
MMS	Multimedia Messaging Service
MMTEL	MultiMedia Telephony 
MnS	Management Service
MNC	Mobile Network Code
NetLoc	Network provided Location information
NIDD	Non-IP Data Delivery
NNI	Network to Network Interface
PCN	Packet switched Core network Node (SGSN, S–GW, P–GW, TDF)
PER	Packed Encoding Rules
P-GW	PDN GateWay 
PCC	Policy and Charging Control
PLMN	Public Land Mobile Network
PS	Packet Switched 
QBC	QoS flow Based Charging
RG	Residential Gateway
RDI	Restricted Digital Information
S-GW	Serving GateWay
SCUDIF	Service Change and UDI/RDI Fallback 
SMF	Session Management Function
SMS	Short Message Service
TDF	Traffic Detection Function
TrGW	Transition GateWay
UDI	Unrestricted Digital Information
TWAG	Trusted WLAN Access Gateway
TWAN	Trusted WLAN Access Network
UMTS	Universal Mobile Telecommunications System
UWAN	Untrusted Wireless Access Network
WLAN	Wireless LAN
XER	XML Encoding Rules
XML	eXtensible Mark-up Language
4	Architecture considerations
TS 32.240 [1] specifies the high level common 3GPP charging architecture as well as more detailed architectures, that are relevant for the present document:
-	Figure 4.3.1.0.1: Logical ubiquitous offline charging architecture.
-	Figure 4.3.3.0.1: Logical ubiquitous converged charging architecture.
The present document specifies the parameters, abstract syntax and encoding rules for all 3GPP defined CDR types as applicable to the Bx interface, i.e. the CDR files.
5	CDR parameters and abstract syntax
5.0	General
This clause specifies the parameters and the abstract syntax of the CDRs defined for 3GPP charging management in the set of domain TSs 32.25x (CS, PS, 5GS), subsystem TSs 32.26x (IMS) and service TSs 32.27x  (MMS, LCS, PoC, MBMS, SMS, MMTel etc.). In doing this, the ASN.1 specified by X.680 [300] is utilized as the notational tool.
This clause is organised in two parts:
- 	the first part describes the CDR parameters;
- 	the second part specifies the abstract syntax of the CDRs as seen in the CDR files transferred across the Bx interface.
Each part is further subdivided into a number of clauses that contain generic, bearer level, service level, and subsystem level CDR parameters and abstract syntax definitions. The converged charging CHF-CDR is described under one clause encompassing NF specific parts. Word processing features, such as formatting options, have also been used to enhance human readability.
The complete set of all CDR syntax definitions is replicated in annex A in a machine processable format. Technically, the contents of this clause and annex A are completely identical. In case of deviations between this clause and annex A due to errors in the present document, the annex shall prevail.
Note that the encoding rules for the abstract syntax specified in this clause, are detailed in clause 6.
5.1	CDR parameter description
5.1.1	Generic CDR parameters
5.1.1.0	Introduction
This subclause contains the description of generic CDR parameters, where the term "generic" implies that these parameters are applicable to CDR types of more than one domain/service/subsystem. 
5.1.1.1.0A	3GPP PS Data Off Status
This field holds the Status of UE’s 3GPP PS Data Off.
5.1.1.1.0B	Data volume octets
This field includes the number of octet transmitted during the use of data services.
5.1.1.1	Serving Network Identity
This field contains a SGSN PLMN Identifier (Mobile Country Code and Mobile Network Code), of the SGSN that was used during the Location request. In case the SGSN changes during the transaction, only the ID of the SGSN that was used at the beginning of the transaction is included in the CDR.
The MCC and MNC are coded as described for 'Routing Area Identity' in TS 29.060 [215].
5.1.1.2	Service Context Id
This field contains the Service Context Id from Diameter Accounting, if Diameter Accounting was used and the field included. It identifies the service, sub-system or domain and release that the CDR is applicable to. The contents are described in TS 32.299 [50].
5.1.1.3	Subscription Identifier
This field identifies the charged party . The contents are coded in a similar fashion as for the Subscription-Id AVP in TS 32.299 [50] if applicable. 
This field may hold the 5G Subscription Permanent Identifier (SUPI) of the served party (e.g., IMSI, NAI, GLI, GCI) as specified in TS 29.571 [249], if applicable.
5.1.1.4	Service Specific Info
This grouped field holds the sub-fields "service specific data" and "service specific type" if and as provided by an Application Server or PCEF only for pre-defined PCC rules or TDF only for pre-defined ADC rules.
5.1.1.5	Service Specific Type
This field holds the type of the Service Specific Data parameter.
5.1.1.6	Service Specific Data
This field contains the value of service specific data.
5.1.1.7	Subscriber Equipment Number
The Subscriber Equipment Number field contains the identification of the User Equipment (UE) accessing the 3GPP system. 
5.1.2	Bearer level CDR parameters
5.1.2.0	General
This clause contains the description of the CDR parameters that are specific to the bearer level CDR types. 
This comprises the CDR types from the Circuit Switched (CS) domain (TS 32.250 [10]), the Packet Switched (PS) domain, i.e. GPRS (TS 32.251 [11]).
5.1.2.1	CS domain CDR parameters
5.1.2.1.0	Introduction
This clause contains the description of the CDR parameters that are specific to the CS domain CDR types as specified in TS 32.250 [10].
5.1.2.1.1	Additional Charging Information
This field consists of two parts, a charge indicator and additional charging parameters. The charge indicator is derived from the information contained within the ISUP "backward call indicator" and may be used to store a charge indicator (charge/no charge) received from another network node. The additional charging parameters are non-standard and intended to permit the inclusion of further charging information received from Intelligent Network and/or Value Added Service nodes.
5.1.2.1.2	AoC parameters/change of AoC parameters
The AoC parameter field contains the set of charge advice (AoC) parameters sent to the MS on call set-up. If further sets of parameters are sent during the call, as a result of a tariff switch-over for example, then this may be recorded in the Change of AoC Parameter field including the time at which the change occurred.
It should be noted that the Change of AoC Parms. field is optional and not required if partial records are generated on tariff switch-over.
The AoC parameters are defined in TS 22.024 [104].
5.1.2.1.3	Basic Service/change of service/ISDN Basic Service
The basic service field contains the code of the basic service employed on call set-up. Any alteration to the basic service during the connection may be recorded in the change of service field including the time at which the change took place.
The change of service field is optional and may be omitted if partial records are created whenever the basic service is changed.
The coding of basic services is defined in detail in TS 29.002 [214].
In the case of the transit record the GSM basic service employed is generally not available. However, if the device on which the call originates/terminates is connected via ISDN digital subscriber signalling then the appropriate ISDN basic service code may be recorded in the record. One possible example includes the direct connection of an ISDN PABX to an MSC/VLR.
5.1.2.1.4	Call duration
This field contains the relevant call duration in seconds. For incomplete calls (call attempts) the relevant duration is the call holding time from the seizure to the release of the traffic channel. For complete (answered) calls this is the chargeable duration from answer to release of the traffic channel. For partial records this is the duration of the individual partial record and not the cumulative duration of the call.
It should be noted that the time stamps may be expressed in terms of tenths of seconds or even milliseconds and, as a result, the calculation of the call duration may result in the rounding or truncation of the measured duration to a whole number of seconds.
Whether or not rounding or truncation is to be used is considered to be outside the scope of the present document subject to the following restrictions:
1)	A call duration of zero seconds shall not be accepted.
2)	The same method of truncation/rounding shall be applied to both single and partial records.
If CAMEL is invoked for the call and a control relationship is existing, the call might continue after a RELEASE or a DISCONNECT from the called party side received by the gsmSSF. The call duration of the incoming leg is stored in the main body of the call record. For each outgoing leg the call duration is stored in the respective 'CAMELInformation' module. If a call leg does not reach answer status and attempt charging is enabled a 'CAMELInformation' module containing the holding time is generated.
An example of how to use the call duration and the timestamps is given in figure 5.1.2.1.4.1. It shows a CAMEL controlled mobile originated follow-on scenario. The uppermost arrow  marks the overall duration of the call that is to be measured and stored in the main body of the respective MOC record. The duration before t5 (incoming leg) or t4 (outgoing leg) needs not to be stored since the call is answered later on. The call duration in the first outgoing leg module contains the time interval from t4 to t6 (period ). The call duration measurement of the second outleg is started with t9 and ended with t10 (interval ).
Since the last outgoing leg is not answered, the respective module contains the holding time starting with t11 and ending with t13 (period ).
(The timestamps t1, t2, t3, t7, t8 and t12 are mentioned for completion reasons only.)

Point in time
Signalling message sent/received
trigger detection point encountered
Duration logging
t1
SETUP; TDP(control)

t2
IAM
seizure of outg. leg 1
t3
ACM

t4
ANSWER
start of call duration (outg. leg 1)
t5
CONNECT
start of call duration (inc. leg)
t6
RELEASE; EDP(control)
stop of call duration (outg. leg 1)
t7
IAM
seizure of outg. leg 2
t8
ACM

t9
ANSWER
start of call duration (outg. leg 2)
t10
RELEASE; EDP(control)
stop of call duration (outg. leg 2)
t11
IAM
seizure of outg. leg 3
start of holding time (outg. leg 3)
t12
ACM

t13
RELEASE; EDP(control)
stop of holding time (outg. leg 3)




Figure 5.1.2.1.4.1: Call duration measurement in follow-on scenarios
5.1.2.1.5	Call reference
This field uniquely identifies a call or transaction on one side of the interface (i.e. 'A' or 'B' side) and is derived from the transaction identifier of TS 24.008 [208]. It is also used to identify all partial records and transactions belonging to the same connection.
For the avoidance of doubt, there is no global call reference defined within GSM and the call reference field cannot be used to combine, for example, the MOC and MTC records of a mobile‑to‑mobile connection.
5.1.2.1.6	Calling/called/connected/translated number
In general an Recommendation E.164 [308] number but may also include other numbering plans e.g. ITU-T Recommendation X.121 [315]. Each of these fields includes the type of number and number plan as specified in detail in TS 24.008 [208]. Where appropriate, these fields may also contain the presentation and screening information also specified in TS 24.008 [208].
The called number is the number received from the mobile station on mobile originated call set-up as defined in TS 24.008 [208]. Similarly, the calling number is the number received from the network on mobile terminated call set-up. In case of CAMEL initiated Call Forward (CF), the called (forwarded-to) number is returned by CAMEL.
The translated number is the result of any digit translation performed by the MSC on the called number received from the mobile station on mobile originated call set-up. This parameter is not included in the CDR if no digit translation has taken place.
The connected number is the number of the actual party reached as defined in TS 24.008 [208]. Although this is normally identical to the called number it may differ. This parameter is not included if identical to the called number. 
The following examples are intended to explain the use of these fields:
EXAMPLE 1:	Called Number = Connected Number
	Normal call from a mobile subscriber to a mobile subscriber or to a PSTN subscriber.
EXAMPLE 2:	Called Number != Connected Number
	In case of routing to a PABX with Automatic Call Distribution or to an ISDN Basic Access with several devices attached. The connected number is that of the party actually reached. N.B. The recording of the actual number connected may be limited by the capability of intermediate signalling connections.
EXAMPLE 3:	MTC record for Call Forwarding ("A" -> "B" -> "C")
	In case of call forwarding, the connected number recorded in the MTC record of the "B" subscriber is that of the forwarded-to party or "C" subscriber. The calling party field contains the number of the "A" subscriber.
EXAMPLE 4:	Translated Number
	This field is only present if digit translation is applied by the MSC to the called number received from the mobile station. Examples include abbreviated dialling codes and service numbers.
5.1.2.1.7	Calling Party Number
This field contains Calling Party Number modified by CAMEL service.
5.1.2.1.8	CAMEL call leg information
This field contains a set of CAMEL information IEs according to the number of outgoing CAMEL call legs.
5.1.2.1.9	CAMEL information
This field contains a list of parameters with information related to one CAMEL outgoing call leg. This parameter list is an Information Element (IE) used in the CAMEL Call Leg Information field.
As a network option, parameters that are identical to the corresponding values in the top level structure of the record are not recorded again. That means whenever a value is not mentioned in this set the value provided in the basic record is valid instead. This might lead to an empty or even absent structure, if no parameter was modified.
5.1.2.1.10	CAMEL initiated CF indicator
The purpose of this field is to distinguish CAMEL call forwarding service scenarios from standard GSM call forwarding scenarios.
From the Basic Call State Model (BCSM)'s point of view this field is set to 'CF' whenever the Originating CAMEL Subscription Information (O_CSI) was applied after terminating CAMEL call processing had been taken place changing the call destination. For the avoidance of doubt: this flag does not depend on other modified call parameter(s) (e.g.: redirection information, etc.) received in the CAP_CONNECT message of the Terminating CAMEL Subscription Information (T_CSI) service.
This flag also indicates that another record might be generated, one containing the charging information related to the terminating CAMEL service and one containing the charging information related to the originating CAMEL service.
5.1.2.1.11	CAMEL modified Service Centre
This field contains SMS-C address modified by CAMEL service. If this field is present the field Service Centre contain SMS-C address before CAMEL modification.
5.1.2.1.12	CAMEL SMS Information
This field contains following CAMEL information for mobile originated and terminated SMS:
-	Default SMS handling:
	This field indicates whether or not a CAMEL encounters default SMS handling. This field shall be present only if default SMS handling has been applied.
-	Free format data:
	See clause 5.1.2.1.26.
-	Calling Party Number:
	This field contains Calling Party Number modified by CAMEL service. 
-	CAMEL modified Service Centre:
	This field contains SMS-C address modified by CAMEL service. 
NOTE 1:	This field is only applicable for originated SMS.
-	CAMEL Destination Subscriber Number
	This field contains short message Destination Number modified by CAMEL service.
NOTE 2:	This field is only applicable for originated SMS.
-	SMS Reference Number:
	This field contains the SMS Reference Number assigned to the Short Message by the MSC.
5.1.2.1.13	Cause for termination
This field contains a generalised reason for the release of the connection including the following:
-	normal release;
-	CAMEL initiated call release;
-	partial record generation;
-	partial record call re-establishment;
-	unsuccessful call attempt;
-	abnormal termination during the stable phase;
-	unauthorized network originating a location service request;
-	unauthorized client requesting a location service;
-	position method failure at a location service execution;
-	unknown or unreachable LCS client at a location service request.
A more detailed reason may be found in the diagnostics field.
5.1.2.1.14	Channel Coding Accepted/Channel Coding Used
A list of traffic channel codings for HSCSD connections accepted/negotiated by the MS.
These parameters are only present in the CDRs for HSCSD connections.
5.1.2.1.15	Data volume
This field includes the number of 64 octet segments transmitted during the use of data services if known.
5.1.2.1.16	Default call/SMS handling
This field indicates whether or not a CAMEL encountered default call/SMS handling. This field shall be present only if default call/SMS handling has been applied. Parameter is defined in HLR as part of CAMEL subscription information.
5.1.2.1.17	Destination Subscriber Number
This field contains Destination/Called Subscriber Number modified by CAMEL service. If not modified then this field may contain original Destination Number also when CAMEL is not active.
5.1.2.1.18	Diagnostics
This field includes a more detailed technical reason for the release of the connection and may contain one of the following:
-	a MAP error from TS 29.002 [214];
-	a Cause from TS 24.008 [208];
-	a Cause from TS 29.078 [217];
-	a Cause from ITU-T Recommendation Q.767 [309];
-	a LCS diagnostics according TS 29.002 [214].
The diagnostics may also be extended to include manufacturer and network specific information.
5.1.2.1.19	EMS-Digits
This parameter only applies to location for an emergency services call in North America and gives the North American Emergency Services Routing Digits as defined in TS 29.002 [214].
5.1.2.1.20	EMS-Key
This parameter only applies to location for an emergency services call in North America and gives the North American Emergency Services Routing Key as defined in TS 29.002 [214].
5.1.2.1.21	Entity number
This field contains the Recommendation E.164 [308] number assigned to the entity (MSC, VLR, HLR etc.) that produced the record. For further details concerning the structure of MSC and location register numbers see TS 23.003 [200].
5.1.2.1.22	Equipment id
This field contains a local identifier used to distinguish between equipment of the same equipment type e.g. the number of the conference circuit employed if more than one is available.
5.1.2.1.23	Equipment type
This field contains the type of common equipment employed e.g. conference circuit for multi-party service.
5.1.2.1.24	Event time stamps
These fields contain the event time stamps relevant for each of the individual record types.
The call records may contain three significant call handling time stamps:
-	the time at which the resource in question was seized	(Seizure time);
-	the time at which the call was answered or at which charging commences	(Answer time);
-	the time at which the resource was released	(Release time).
For both Mobile Originated and Mobile Terminated calls, the Seizure time is the time at which the traffic channel is allocated i.e. the time at which the ASSIGN COMMAND message is sent to the MS.
For Mobile Originated calls the Answer time is the time at which the CONNECT message is sent to the calling party. For Mobile Terminated calls the time at which the CONNECT message is received from the called party. However, if the subscriber has subscribed to the advice of charge charging level service, then the answer time shall be derived from the time at which the FACILITY message is received from the MS containing the acknowledgement of receipt of the AOC parameters. Similarly, if the AOC parameters are changed during the call then the change time recorded for a subscriber with AOC charging level is the receipt of the FACILITY message from the MS. For a subscriber with AOC information level the change time recorded is the time at which the FACILITY is sent to the MS. Finally, in case of call re-establishment the answer time is the time at which the new traffic channel is allocated by the MSC i.e. when the ASSIGN COMMAND is sent to the MS.
The Release time is the time at which the connection is released by either party i.e. a DISCONNECT or RELEASE is sent by the network or a DISCONNECT is received from the MS. In the case of a radio link failure, the release time is the time at which the failure was detected by the MSC.
For unsuccessful call attempts the Seizure time is mandatory. The Release time is optional and the call duration recorded is the call holding time i.e. the difference between the two.
For successful calls the Answer time is mandatory and both the Seizure and Release times are optional. The call duration recorded is the chargeable duration i.e. the difference between the Answer and Release time stamps.
The event records include the following time stamps:
-	HLR-int time:	The receipt of a MAP_SEND_ROUTING_INFO request by the HLR;
-	Loc.Upd. time:	The receipt of a MAP_UPDATE_LOCATION_AREA request by the VLR or the receipt of 	a MAP_UPDATE_LOCATION request by the HLR;
-	SS-Action:	The receipt of a supplementary service request by the VLR;
	e.g. MAP_REGISTER_SS, MAP_INVOKE_SS
-	SMS-MO:		The receipt of an RP_DATA message from the MS containing an SMS_SUBMIT PDU;
-	SMS-MT:		The transmission of an RP_DATA message to the MS containing an SMS_DELIVER 	PDU;
-	LCS:	The time the LR was processed.
It should be noted that the events listed above are only examples in order to demonstrate the principles and that the list is by no means exhaustive.
All time-stamps include a minimum of date, hour, minute and second.
5.1.2.1.25	Fixed Network User Rate
This field indicates the user data rate applied for the connection in the fixed network. In UMTS, it shall be present for all bearer services as specified in TS 22.002 [102]. In GSM, this parameter is part of the HSCSD connection parameters, see clause 5.1.2.1.30.
5.1.2.1.26	Free format data
This field contains charging information sent by the gsmSCF in the Furnish Charging Information (FCI) messages as defined in TS 29.078 [217]. The data can be sent either in one FCI message or several FCI messages with append indicator. This data is transferred transparently in the CAMEL clauses of the relevant call records. 'Free format data' sent to the legID=1 is always stored in the top level of the respective record. 'Free format data' sent to the legID >1 is stored in the appropriate CAMEL call leg information field.
If the FCI is received more than once during one continuing incoming/outgoing CAMEL call leg, the append indicator defines whether the FCI information is appended to previous FCI and stored in the relevant record or the information of the last FCI received is stored in the relevant record (the previous FCI information shall be overwritten).
In the event of partial output the currently valid 'Free format data' is stored in the partial record.
5.1.2.1.27	Free format data append indicator
This field contains an indicator whether free format data is to be appended to free format data stored in previous partial CDR. This field is needed in CDR post-processing to sort out valid free format data for that call leg from sequence of partial records. Creation of partial records is independent on received FCIs and thus valid free format data may be divided to different partial records.
If field is missing then free format data in this CDR replaces all received free format data in previous CDRs. Append indicator is not needed in the first partial record. In following partial records indicator shall get value true if all FCIs received during that partial record have append indicator. If one or more of the received FCIs for that call leg during the partial record do not have append indicator then this field shall be missing.
5.1.2.1.28	GsmSCF address
This field identifies the CAMEL server serving the subscriber. Address is defined in HLR as part of CAMEL subscription information.
5.1.2.1.29	Guaranteed Bit Rate
This field contains the Guaranteed Bit Rate based on the FNUR for transparent and Wanted AIUR for non-transparent CS data services based on the described mapping in TS 27.001 [213]. The Guaranteed Bit Rate may be used to facilitate admission control based on available resources, and for resource allocation within UMTS. The bit-rate of the UMTS bearer service shall guarantee to the user or applications refer TS 22.002 [102].
Operator may choose any of the possible values less or equal to wanted AIUR (Air Interface User Rate). 
(If WAIUR is less or equal to 14,4 kbit/s then Guaranteed Bit Rate and Maximum Bit Rate shall be set to 14,4 kbit/s).
5.1.2.1.30	HSCSD parameters/Change of HSCSD parameters
The basic HSCSD parameters are negotiated between the MS and the network at call set-up time. They comprise of the following parameters:
-	the FNUR (Fixed Network User Rate) (optionally);
-	the total AIUR (Air Interface User Rate) requested by the MS (for non-transparent HSCSD connections only);
-	a list of the channel codings accepted by the MS;
-	the maximum number of traffic channels accepted by the MS (this is noted in the channels requested field);
-	the channel coding and the number of traffic channels actually used for the call.
In case the network or user initiated modification procedure takes place during the call, the AIUR requested, the channel coding used and the number of traffic channel requested/used might be recorded in the Change of HSCSD parameters field including the time at which the change occurred and which entity requested the change.
It should be noted that the Change of HSCSD Parameters field is optional and not required if partial records are generated when a Change of HSCSD Parameters takes place.
5.1.2.1.31	Incoming/outgoing trunk group
The incoming trunk group describes the trunk on which the call originates as seen from the MSC. For mobile originated calls this will generally be a BSS trunk. Similarly, the outgoing trunk group describes the trunk on which the call leaves the MSC.
For 3G, this parameter may not be available. When available, this parameter shall be supplied in the CDRs.
5.1.2.1.32	Interrogation result
This field contains the result of the HLR interrogation attempt as defined in the MAP (TS 29.002 [214]).
NOTE:	This field is only provided if the attempted interrogation was unsuccessful.
5.1.2.1.33	IMEI Check Event
This field identifies the type of event that caused the IMEI check to take place:
-	Mobile originating call attempt;
-	Mobile terminating call attempt;
-	Mobile originating SMS;
-	Mobile terminating SMS;
-	Supplementary service actions performed by the subscriber;
-	Location update.
5.1.2.1.34	IMEI Status
This field contains the result of the IMEI checking procedure:
-	Greylisted;
-	Blacklisted;
-	Non-whitelisted.
5.1.2.1.35	JIP Parameter
This Jurisdiction Information Parameter (JIP) is populated if received via one of the methods listed as JIP Source. The field shall identify the actual originating exchange and may be equal to 6 or 10 digits for North America Region (NAR). Note that this field may not apply for international areas, as it is not currently used. Additionally, it is also possible to use the LRN as the JIP if it properly identifies the originating switch.
5.1.2.1.36	JIP Query Status Indicator
This field indicates the status of Location Routing Number (LRN) query as follows:
1.		Number Portability Data Base (NPDB) returns LRN or NULL response (free of any error).
2.		No response was received to the query; the query timed out.
4.		Protocol error in received response message.
5.		Error detected in response data.
6.		Query rejected
9.		No query performed
99.		Query unsuccessful, reason unknown 
If the JIP is equal to the LRN, then the JIP query status shall be the same as the LRN query status. If not, this field shall be set to one of the values listed above.
5.1.2.1.37	JIP Source Indicator
This indicator shall be populated if the Jurisdiction Information Parameter is derived. Identifies the method in which the value was derived. Shall be set to the values listed in the LRN Source Indicator.
5.1.2.1.38	LCS Cause
The LCS Cause parameter provides the reason for an unsuccessful location request according TS 49.031 [227].
5.1.2.1.39	LCS Client Identity
This field contains further information on the LCS Client identity:
-	Client External ID;
-	Client Dialled by MS ID;
-	Client Internal ID.
5.1.2.1.40	LCS Client Type
This field contains the type of the LCS Client as defined in TS 29.002 [214].
5.1.2.1.41	LCS Priority
This parameter gives the priority of the location request as defined in TS 49.031 [227]
5.1.2.1.42	LCS QoS
This information element defines the Quality of Service for a location request as defined in TS 49.031 [227].
5.1.2.1.43	Level of CAMEL service
This field describes briefly the complexity of CAMEL invocation:
-	'Basic' means that CAMEL feature is invoked during the set-up phase (e.g. to modify the destination) of the call only;
-	'Online charging' means that CAMEL supported AoC parameter were sent to the mobile station (the Send Charging Information message, SCI, is received from the gsmSCF);
-	The flag 'call duration supervision' is set whenever the call duration supervision is applied in the gsmSSF of the VPLMN (apply charging message is received from the gsmSCF).
5.1.2.1.44	Location/change of location
The location field contains a combination of the Location Area Code (LAC), Cell Identity (CI) and MCC+MNC of the cell in which the served party is currently located. Any change of location may be recorded in the change of location field including the time at which the change took place.
The change of location field is optional and not required if partial records are generated when the location changes.
The LAC and CI are both 2 octet quantities and coded according to TS 24.008 [208].
For SMS over SGs (defined in TS 36.413 [226]), the LAC field contains the Tracking Area Code and the Cell Identity contains the 16 least significant bits. 
5.1.2.1.45	Location Estimate
The Location Estimate field is providing an estimate of a geographic location of a target MS according to TS 29.002 [214].
5.1.2.1.46	Location Extension
The Location Extension field contains the 12 most significant bits from the Cell Identity field. This is used when SMS over SGs (defined in TS 36.413 [226]) is applied and the access is E-UTRAN. 
5.1.2.1.47	Location Routing Number (LRN)
This field contains Ten-digit Location Routing Number (LRN) for the Number Portability feature. It is populated if received via one of the methods listed as "LRN Source". It identifies the new location of a ported subscriber. For North America Region (NAR) this may be a 10-digit E.164 number. For Europe, other formats may apply.
If more than 10 digits are received, the first ten digits received are recorded. If fewer than 10 digits are received, the information is left justified in the field and padded with 0xF.
5.1.2.1.48	Location Type
This field contains the type of the location as defined in TS 29.002 [214].
5.1.2.1.49	LRN Query Status Indicator
This field indicates the status of Location Routing Number (LRN) query as follows:
1.		Number Portability Data Base (NPDB) returns LRN or NULL response (free of any error);
2.		No response was received to the query; the query timed out;
4.		Protocol error in received response message;
5.		Error detected in response data;
5.		Query rejected;
9.		No query performed;
99.		Query unsuccessful, reason unknown.
It is populated if an NP query was performed.
5.1.2.1.50	LRN Source Indicator
This field indicates whether the Location Routing Number is obtained from LRN NP database or it came in incoming signalling or switching system data.
It is populated if routing information for a ported subscriber is received from one of the methods listed below. 
It shall be equal to one of the following enumerated values:
1.	LRN NP Database;
2.	SwitchingSystemData;
3.	Incomingsignaling;
9.	Unknown.
5.1.2.1.51	Maximum Bit Rate
This field contains the Maximum Bit Rate based on the FNUR (Fixed Network User Rate) for transparent and WAIUR(Wanted Air Interface User Rate) for non-transparent CS data services based on the described mapping in TS 27.001 [213]. The parameter can be used to make code reservations in the downlink of the radio interface for the UMTS bearer service (BS20 and BS30) refer TS 22.002 [102]. Its purpose is:
    • to limit the delivered bit-rate to applications or external networks with such limitations, 
    • to allow maximum wanted user bit-rate to be defined for applications able to operate with different rates (e.g. applications with adapting codecs).]
Maximum bit rate is set to the highest value  WAIUR (If WAIUR is less or equal to 14.4 kbit/s then Guaranteed Bit Rate and Maximum Bit Rate shall be set to 14.4 kbit/s).
5.1.2.1.52	Measure Duration
This field contains the duration for the section of the location measurement corresponding to the location request and the location report messages.
5.1.2.1.53	Message reference
This field contains a unique message reference number allocated by the mobile station when transmitting a short message to the service centre. This field corresponds to the TP-Message-Reference element of the SMS_SUBMIT PDU defined in TS 23.040 [201].
5.1.2.1.54	MLC Number
This parameter refers to the ISDN (E.164[308]) number of an MLC.
5.1.2.1.55	Mobile station classmark/change of classmark
This MS classmark field contains the mobile station classmark employed by the served MS on call set-up as defined in TS 24.008 [208] (see mobile station classmark 2, mobile station classmark 3). Any alteration in the classmark during the connection may be recorded in the change of classmark field and will include the time at which the change took place.
It should be noted that the change of classmark field is optional and not required if partial records are created when the classmark is altered.
5.1.2.1.56	MOLR Type
The MOLR-Type identifier refers to the type of MO-LR that was invoked as defined in TS 24.080 [209].
5.1.2.1.57	MSC Address
This field contains the Recommendation E.164 [308] number assigned to the MSC that produced the record. For further details concerning the structure of MSC numbers see TS 23.003 [200].
5.1.2.1.58	MSC Server Indication
This field contains an indicator whether the CAMEL subscription information is active. The parameter is present for the VT-CSI in the VMSC and not present for the T-CSI in the GMSC.
This indication should be used for differentiation between the validity of the record content for T-CSI in the GMSC and VT-CSI in the VMSC.
5.1.2.1.59	Network Call Reference
Whenever CAMEL is applied, this field is used for correlation of call records outputted from the originating MSC (when applicable), the GMSC and the terminating MSC, and a network optional call record from the gsmSCF.
5.1.2.1.60	Notification to MS user
This field contains the privacy notification to MS user that was applicable when the LR was invoked as defined in TS 29.002 [214].
5.1.2.1.61	Number of DP encountered
This field indicates how often CAMEL armed detection points (TDP and EDP) were encountered and is a measure of signalling between serving network and CAMEL service and complements 'Level of CAMEL service' field. Detection points from all applied CAMEL services for a single call leg and processed in the same gsmSSF shall be counted together.
5.1.2.1.62	Number of forwarding
This field, if provided via ISUP signalling, contains the number of times a call has been forwarded prior to the interrogation of the HLR and is defined in TS 29.002 [214].
5.1.2.1.63	Old /new location
These fields contain the location of a mobile subscriber before and after a location update. In case of VLR location update the location information consists of a VMSC number and location area code and MCC+MNC, with identity of the cell or the SAC for new location. In case of HLR location update the field contains the VMSC number and the VLR number.
5.1.2.1.64	Partial Record Type
This field indicates the event that caused the generation of a partial record.
5.1.2.1.65	Positioning Data
This information element is providing positioning data associated with a successful or unsuccessful location attempt for a target MS according TS 49.031 [227].
5.1.2.1.66	Positioning Data
This information element is providing positioning data associated with a successful or unsuccessful location attempt for a target MS according TS 49.031 [227].
5.1.2.1.67	Privacy Override
This parameter indicates if MS privacy is overridden by the LCS client when the GMLC and VMSC/SGSN for an MT‑LR are in the same country as defined in TS 29.002 [214].
5.1.2.1.68	Radio channel requested/radio channel used/change of radio channel
The radio channel requested field contains the type of channel requested by the user. The following values are permitted:
-	full rate;
-	half rate;
-	dual mode half rate preferred;
-	dual mode full rate preferred.
The radio channel used field indicates the type of traffic channel actually employed for the connection i.e. either full rate (Bm) or half rate (Lm) as described in GSM 05.01  via CR change to 45.001 [312]. Any change in the type of channel used may be recorded in the change of radio channel used field including the time at which the change occurred and the speech version used after the change of radio channel.
5.1.2.1.69	Rate Indication
This parameter specifies the rate adaptation that was used for the connection. The field is constructed from the information in the parameters "rate adaptation" and "other rate adaptation" signalled between the MS/UE and the network, see TS 24.008 [208].
The format of this field is a single octet with the following format:
-	Bits 0-1: the Rate Adaptation field as defined in TS 24.008 [208];
    • Bits 2-3: the Other Rate Adaptation field as defined in TS 24.008 [208];
-	Bits 4-7: not used.
5.1.2.1.70	Reason for Service Change
This field contains the type of  service change  requested by the subscriber or performed by the network. Possible values include:
-	subscriber initiated;
-	network initiated;
-	call setup fallback;
-	call setup change order.
For further details see TS 23.172 [207].
5.1.2.1.71	Record extensions
The field enables network operators and/ or manufacturers to add their own extensions to the standard record definitions.
5.1.2.1.72	Record type
The field identifies the type of the record e.g. mobile originated, mobile terminated etc.
5.1.2.1.73	Recording Entity
This field contains the E.164 [308] number assigned to the entity (MSC, VLR, HLR etc.) that produced the record. For further details concerning the structure of MSC and location register numbers see TS 23.003 [200].
5.1.2.1.74	Redial attempt
This field indicates that a call is the result of a redial attempt to switch from speech to multimedia or vice-versa.
5.1.2.1.74A	Related ICID
This field contains the related IMS Charging ID for the IMS call leg in case of SRVCC as received from IMS domain.
5.1.2.1.75	Roaming number
The roaming number field contains the mobile station roaming number as defined in TS 23.003 [200] and coded according to TS 29.002 [214].
5.1.2.1.76	Routing number 
The routing number field of the HLR interrogation record contains either a mobile station roaming number or, in case of call forwarding, a forwarded-to number.
5.1.2.1.77	Sequence number
This field contains a running sequence number employed to link the partial records generated for a particular connection.
5.1.2.1.78	Served IMEI
This fields contains the international mobile equipment identity (IMEI) or IMEISV of the equipment served. 
The term "served" equipment is used to describe the ME involved in the transaction recorded e.g. the called ME in case of an MTC record.
The structure of the IMEI, IMEISV is specified in TS 23.003 [200] and the encoding defined in TS 29.274 [223].
5.1.2.1.79	Served IMSI
This fields contains the international mobile subscriber identity (IMSI) of the served party. The term "served" party is used to describe the mobile subscriber involved in the transaction recorded e.g. the calling subscriber in case of an MOC record.
The structure of the IMSI is defined in TS 23.003 [200].
5.1.2.1.80	Served MSISDN
This fields contains the mobile station ISDN number (MSISDN) of the served party. The term "served" party is used to describe the mobile subscriber involved in the transaction recorded e.g. the called subscriber in case of an MTC record. In case of multi-numbering the MSISDN stored in a MOC record will be the primary MSISDN of the calling party.
The structure of the MSISDN is defined in TS 23.003 [200].
5.1.2.1.81	Service centre address
This field contains a Recommendation E.164 [308] number identifying a particular service centre e.g. short message service centre (see TS 23.040 [201]).
5.1.2.1.82	Service Change Initiator
This field indicates that the owner of this CDR is the initiator of the service change.
5.1.2.1.83	Service key
This field identifies the CAMEL service logic applied. Service key is defined in HLR as part of CAMEL subscription information.
5.1.2.1.84	Short message service result
This field contains the result of an attempt to deliver a short message either to a service centre or to a mobile subscriber (see TS 29.002 [214]). Note that this field is only provided if the attempted delivery was unsuccessful.
5.1.2.1.85	Speech version supported/Speech version used
The speech version supported field contains the speech version supported by the MS with the highest priority. 
The speech version used field contains the speech codec version assigned for that call. The coding is according GSM 08.08 [313] speech version identifier with the extension bit 8 set to 0.
It should be noted that the change of radio channel field is optional and not required if partial records are generated.
5.1.2.1.86	Supplementary service(s)
The supplementary service field in the Supplementary Service record type contains the code of the supplementary service on which the action was performed.
The supplementary services field in the MOC/MTC records contains the codes of the supplementary services invoked as a result of, or during, a connection.
The coding of supplementary service is described in detail in TS 29.002 [214].
5.1.2.1.87	Supplementary service action
This field contains the type of supplementary service action requested by the subscriber or performed by the network. Possible values include:
-	registration;
-	erasure;
-	activation;
-	deactivation;
-	interrogation;
-	invocation.
For further details see TS 22.004 [103].
5.1.2.1.88	Supplementary service action result
This field contains the result of an attempted supplementary service action (see TS 29.002 [214]). Note that this field is only provided if the SS-action was at least partially unsuccessful.
5.1.2.1.89	Supplementary service parameters
This field contains the parameters associated with a supplementary service action requested by the subscriber. For further details of the parameters involved see the GSM 02.8n series of documents.
5.1.2.1.90	Supplementary service(s)
The supplementary service field in the Supplementary Service record type contains the code of the supplementary service on which the action was performed.
The supplementary services field in the MOC/MTC records contains the codes of the supplementary services invoked as a result of, or during, a connection.
The coding of supplementary service is described in detail in TS 29.002 [214].
5.1.2.1.91	System type
This field indicates the use of GERAN, UTRAN (or a value of unknown). This field is present when either the UTRAN or GERAN air-interface is used on call set-up. For an open CDR in a 2G NE (responsible for the CDR), the field is not present (even if the call is handed off to a 3G air interface). For a CDR in a 3G NE (responsible for the CDR), the value unknown shall be used after handover.
5.1.2.1.92	Transparency indicator
This field indicates whether the basic service was employed in transparent or non-transparent mode. It should also be noted that this field is only relevant for those services which may be operated in both transparent and non-transparent modes.
5.1.2.1.93	Update result
This field contains the result of the location update request as defined in the MAP (TS 29.002 [214]). Note that this field is only provided if the attempted update was unsuccessful.
5.1.2.2	PS domain CDR parameters
5.1.2.2.A	Introduction
This subclause contains the description of the CDR parameters that are specific to the PS domain CDR types as specified in TS 32.251 [11]. 
5.1.2.2.B	Void
5.1.2.2.0	3GPP2 User Location Information  
This field holds the 3GPP2 User Location Information. It contains the 3GPP2-BSID as described in TS 29.212 [220].
The parameter is provided to the PGW/TDF during IP-CAN/TDF session establishment/modification, through PCC procedures for non-3GPP Accesses, as defined in the TS 23.203 [203]. 
5.1.2.2.0aA	Access Availability Change Reason
This field indicates the reason why the availability of an access is changed by the PCEF, i.e. RAN rule indication or Access usable/unusable as defined in TS 29.212 [220].
5.1.2.2.0A	Access Line Identifier
This field contains the Access line id (physical and logical circuit ID) serving the 3GPP UE or fixed user (i.e. Fixed device or RG).
This field contains the Access line id (physical and logical circuit ID):
-	serving the 3GPP UE or fixed device, behind the RG when in bridge mode or in routed mode without NAT, or
-	of the RG when in routed mode with NAT; 
-	of the access point to which the UE is attached, in trusted or untrusted WLAN.
5.1.2.2.1	Access Point Name (APN) Network/Operator Identifier
These fields contain the actual connected Access Point Name Network/Operator Identifier determined either by MS, SGSN/MME or modified by CAMEL service. An APN can also be a wildcard, in which case the SGSN/MME selects the access point address.
Following TS 23.003 [200], the APN field is specified in the CDR by two variable strings. The first is the APN Network Identifier (NI portion) and the second is the APN Operator Identifier (OI portion). The APN NI may contain one or more label as described in TS 23.003 [200]. The APN OI is composed of three labels. The first and second labels together shall uniquely identify the PLMN operator (e.g. "mnc<operator mnc>.mcc<operator mcc>.gprs"). 
To represent the APN NI and OI in the PCN CDRs, the "dot" notation shall be used.
See TS 23.003 [200] and TS 23.060 [202] for more information about APN format and access point decision rules. 
5.1.2.2.1A	APN Rate Control  
This field contains the APN Rate Control as specified in TS 23.401 [245], which is used during the record for the PDN connection to the PGW. 
5.1.2.2.2	APN Selection Mode
This field indicates how the SGSN/MME selected the APN to be used. The values and their meaning are as specified in  TS 29.060 [215] for GTP case and in  TS 29.274 [223] for eGTP case.
5.1.2.2.3	CAMEL Charging Information
This field contains the CAMEL Information as defined for the PDP context from the SGSN as the copy including Tag and Length from the SGSN's CDR (S‑CDR).
5.1.2.2.4	CAMEL Information
This field includes following CAMEL information elements for PDP context (S-CDR), Attach/Detach session 
(M-CDR), Mobile originated SMS (S-SMO-CDR) and Mobile terminated SMS (S-SMT-CDR)  if corresponding CAMEL service is activated. 
    • CAMEL Access Point Name NI (S-CDR):
This field contains the network identifier part of APN before modification by the CSE. 
    • CAMEL Access Point Name OI (S-CDR):
This field contains the operator identifier part of APN before modification by the CSE.
    • CAMEL Calling Party Number (S-SMO-CDR, S-SMT-CDR):
This field contains the Calling Party Number modified by the CAMEL service.
    • CAMEL Destination Subscriber Number (S-SMO-CDR):
This field contains the short message Destination Number modified by the CAMEL service.
    • CAMEL SMSC Address (S-SMO-CDR):
This field contains the SMSC address modified by the CAMEL service.
    • SCF address (S-CDR, M-CDR, S-SMO-CDR, S-SMT-CDR):
This field identifies the CAMEL server serving the subscriber. Address is defined in HLR as part of CAMEL subscription information.
    • Service key (S-CDR, M-CDR, S-SMO-CDR, S-SMT-CDR):
This field identifies the CAMEL service logic applied. Service key is defined in HLR as part of CAMEL subscription information.
    • Default Transaction/SMS Handling (S-CDR, M-CDR, S-SMO-CDR, S-SMT-CDR):
This field indicates whether or not a CAMEL encountered default GPRS- or SMS-handling. This field shall be present only if default call handling has been applied. Parameter is defined in HLR as part of CAMEL subscription information. 
    • Free Format Data (S-CDR, M-CDR, S-SMO-CDR, S-SMT-CDR):
This field contains charging information sent by the gsmSCF in the Furnish Charging Information GPRS messages as defined in TS 29.078 [217]. The data can be sent either in one FCI message or several FCI messages with append indicator. This data is transferred transparently in the CAMEL clauses of the relevant call records. 
If the FCI is received more than once during one CAMEL call, the append indicator defines whether the FCI information is appended to previous FCI and stored in the relevant record or the information of the last FCI received is stored in the relevant record (the previous FCI information shall be overwritten). 
In the event of partial output the currently valid "Free format data" is stored in the partial record.
    • FFD Append Indicator (S-CDR, M-CDR):
This field contains an indicator whether CAMEL free format data is to be appended to free format data stored in previous partial CDR. This field is needed in CDR post processing to sort out valid free format data for that call leg from sequence of partial records. Creation of partial records is independent of received FCIs and thus valid free format data may be divided to different partial records. 
If field is missing then free format data in this CDR replaces all received free format data in previous CDRs. Append indicator is not needed in the first partial record. In following partial records indicator shall get value true if all FCIs received during that partial record have append indicator. If one or more of the received FCIs for that call leg during the partial record do not have append indicator then this field shall be missing. 
    • Level of CAMEL services (S-CDR, M-CDR):
This field describes briefly the complexity of CAMEL invocation. Categories are the same as in circuit switched services and measure of resource usage in VPLMN requested by HPLMN.
-	"Basic" means that CAMEL feature is invoked during the PDP context activation phase only (e.g. to modify APN_NI/APN_OI). 
-	"Call duration supervision" means that PDP context duration or volume supervision is applied in the gprsSSF of the VPLMN (Apply Charging message is received from the gsmSCF).
-	Number of DPs encountered (S-CDR, M-CDR):
This field indicates how many armed CAMEL detection points (TDP and EDP) were encountered and complements "Level of CAMEL service" field. 
    • smsReferenceNumber (S-SMO-CDR, S-SMT-CDR)
This parameter contains the SMS Reference Number assigned to the Short Message by the SGSN.
5.1.2.2.5	Cause for Record Closing
This field contains a reason for the release of the CDR. In case of Rf interface is used, it is derived from Change-Condition AVP at PS-information AVP level defined in TS 32.299 [40], when received. The following is included:
-	normal release: IP-CAN bearer release or detach, TDF session release, IP-CAN session release for IP-Edge; It corresponds to "Normal Release" in Change-Condition AVP.
-	data volume limit; It corresponds to "Volume Limit" in Change-Condition AVP.
-	time (duration) limit; It corresponds to "Time Limit" in Change-Condition AVP.
-	maximum number of changes in charging conditions; It corresponds to "Max Number of Changes in Charging conditions " in Change-Condition AVP.
-	For SGSN: intra SGSN intersystem change (change of radio interface from GSM to UMTS or vice versa);
-	For P-GW, TDF and S-GW: Radio Access Technology (RAT) change; It corresponds to "RAT Change" in Change-Condition AVP.
-	abnormal termination (IP-CAN bearer or MM context or TDF session, or IP-CAN session); It corresponds to "Abnormal Release" in Change-Condition AVP.
-	For SGSN: SGSN change;
-	For S-GW, ePDG, TWAG: S-GW change; It corresponds to "S-GW Change" in Change-Condition AVP and is used for inter serving node change of all types.
-	Timezone change; It corresponds to "UE TimeZone Change" in Change-Condition AVP.
-	SGSN or S-GW PLMN change; It corresponds to "Serving Node PLMN Change" in Change-Condition  AVP.
-	For P-GW: APN-AMBR change: It corresponds to "Qos Change" in Change-Condition AVP. 
-	For S-GW, P-GW: MO exception data counter receipt: It corresponds to " MO exception data counter receipt" in Change-Condition AVP.
-	unauthorized network originating a location service request;
-	unauthorized client requesting a location service;
-	position method failure at a location service execution;
-	unknown or unreachable LCS client at a location service request;
-	management intervention (request due to O&M reasons); It corresponds to "Management Intervention" in Change-Condition AVP;
-	VoLTE bearer normal release: It corresponds to "VoLTE Bearer Normal Release" in Change-Condition AVP.
-	VoLTE bearer abnormal release: It corresponds to "VoLTE Bearer Abnormal Release" in Change-Condition AVP.A more detailed reason may be found in the diagnostics field or Enhanced Diagnostics field.
5.1.2.2.6	Cell Identifier
For GSM, the Cell Identifier is defined as the Cell Id, reference 24.008 [208], and for UMTS it is defined as the Service Area Code in TS 25.413 [212].
5.1.2.2.7	Charging Characteristics
The Charging Characteristics field allows the operator to apply different kind of charging methods in the CDRs. 
A subscriber may have Charging Characteristics assigned to his subscription. These characteristics can be supplied by the HLR/HSS according to the rules specified in Annex A of TS 32.251 [11]. 
Charging Characteristics used by IP-Edge [PCEF] or TDF in Convergent Fixed-Mobile Operator scenario are always configured in IP-Edge [PCEF] or TDF respectively, as described in annex D of TS 32.251 [11]. 
This information can be used by the PCNs/ IP-Edge [PCEF] to activate charging generation and e.g. control the closure of the CDR or the traffic volume containers (see clause 5.1.2.2.25) and applied charging characteristics is included in CDRs transmitted to nodes handling the CDRs via the Ga reference point. It can also be used in nodes handling the CDRs (e.g., the CGF or the billing system) to influence the CDR processing priority and routing. These functions are accomplished by specifying the charging characteristics as sets of charging profiles and the expected behaviour associated with each profile. 
The interpretations of the profiles and their associated behaviours can be different for each PLMN operator and are not subject to standardisation. In the present document only the charging characteristic formats and selection modes are specified.
The functional requirements for the Charging Characteristics are further defined in normative Annex A of 
TS 32.251 [11], including an example for the definitions of the trigger profiles associated with each CDR type.
The format of charging characteristics field is depicted in Figure 4. Each Bx (x =0..15) refers to a specific behaviour defined on a per-Operator basis, indicated as active when set to "1" value. See Annex A of 
TS 32.251 [11] for guidance on how behaviours could be defined.

Figure 5.1.2.2.7.1: Charging Characteristics flags
5.1.2.2.8	Charging Characteristics selection mode
This field indicates the charging characteristic type that the PCNs applied to the CDR. In the SGSN the allowed values are:
-	Home default;
-	Visiting default;
-	Roaming default;
-	APN specific;
-	Subscription specific.
In the S-GW/P-GW/TDF the allowed values are:
-	Home default;
-	Visiting default;
-	Roaming default;
-	Serving node supplied.
NOTE: 	The value 'Serving Node Supplied' is used if the CC what was received from e.g. S-GW is used i.e. the one what comes during bearer activation. 
Further details are provided in TS 32.251 [11] Annex A.
In the IP-Edge [PCEF] and TDF in Convergent Fixed-Mobile Operator scenario, the allowed values are:
-	Home default;
-	Visiting default;
-	Fixed default;
Further details are provided in TS 32.251 [11] Annex D.
5.1.2.2.9	Charging ID 
This field is a charging identifier, which can be used together with P-GW address to identify all records produced in SGSN(s), S-GW and P-GW involved in a single IP-CAN bearer. Charging ID is generated by P-GW at IP-CAN bearer activation and transferred to bearer requesting SGSN/S-GW. At inter-SGSN/S-GW change the charging ID is transferred to the new SGSN/S-GW as part of each active IP-CAN bearer. 
In case of PMIP-based connectivity, the Charging Id is generated per PDN connection.
Different P-GWs allocate the charging ID independently of each other and may allocate the same numbers. 
The CGF and/or BS may check the uniqueness of each charging ID together with the P-GWs address and optionally (if still ambiguous) with the record opening time stamp.
5.1.2.2.9A	CN Operator Selection Entity
This field defines which entity (UE or Network) has selected the Serving Core Network in Network Sharing situations.
5.1.2.2.9Aa	CP CIoT EPS Optimisation Indicator  
This field contains the indication on whether Control Plane CIoT EPS optimisation is used by the PDN connection during data transfer with the UE (i.e. Control Plane NAS PDU viaS11-U between SGW andMME) or not (i.e. User Plane via S1-U between SGW and eNB).  
5.1.2.2.9B	Charging per IP-CAN Session Indicator
This field indicates whether charging per IP-CAN session is active or not. 
5.1.2.2.10	Destination Number
This field contains short message Destination Number requested by the user. See TS 32.250 [10].
5.1.2.2.11	Diagnostics
This field includes a more detailed technical reason for the releases of the connection. 
The diagnostics may also be extended to include manufacturer and network specific information.
5.1.2.2.12	Duration
This field contains the relevant duration in seconds for IP-CAN bearer (S-CDR, SGW-CDR, PGW-CDR), 
IP-CAN session (IPE-CDR),  and attachment (M-CDR). In case of TDF-CDR, this field contains the relevant duration in seconds for TDF session.
It is the duration from Record Opening Time to record closure. For partial records this is the duration of the individual partial record and not the cumulative duration.
It should be noted that the internal time measurements may be expressed in terms of tenths of seconds or even milliseconds and, as a result, the calculation of the duration may result in the rounding or truncation of the measured duration to a whole number of seconds.
Whether or not rounding or truncation is to be used is considered to be outside the scope of the present document subject to the following restrictions:
1)	A duration of zero seconds shall be accepted providing that the transferred data volume is greater than zero.
2)	The same method of truncation/rounding shall be applied to both single and partial records.
5.1.2.2.13	Dynamic Address Flag
This field indicates that PDN address has been dynamically allocated for that particular IP-CAN bearer (PDN connection). This field is missing if address is static. Dynamic address allocation might be relevant for charging e.g. as one resource offered and possible owned by network operator.
5.1.2.2.13A	Dynamic Address Flag Extension
This field indicates that the IPv4 address has been dynamically allocated for that particular IP-CAN bearer (PDN connection) of PDN type IPv4v6, and the dynamic IPv6 prefix is indicated in Dynamic Address Flag. This field is missing if IPv4 address is static. Dynamic address allocation might be relevant for charging e.g. as one resource offered and possible owned by network operator.
5.1.2.2.13Aa	Enhanced Diagnostics
This field includes a more detailed technical reason with a set of causes for the release of the connection and may contain the following:
-	RAN/NAS cause from TS 29.274 [223];
NOTE: The Enhanced Diagnostics is defined to allow extensions to other types of release causes in the future. 
5.1.2.2.13B	EPC QoS Information
This field contains the APN-AMBR for the IP-CAN session. It is used in the PGW-CDR only when charging per IP-CAN session is active.
5.1.2.2.13C	ePDG Address Used
This field is the serving ePDG IP Address for the Control Plane. If both an IPv4 and an IPv6 address of the ePDG is available, the ePDG shall include the IPv4 address in the CDR.
5.1.2.2.13D	ePDG IPv6 Address 
This field is the serving ePDG IPv6 Address for the Control Plane, when both IPv4 and IPv6 addresses of the ePDG are available. 
5.1.2.2.14	Event Time Stamps
These fields contain the event time stamps relevant for each of the individual record types.
All time-stamps include a minimum of date, hour, minute and second.
5.1.2.2.15	Void
5.1.2.2.15A	Fixed User Location Information
This field contains the UE location in a fixed broadband access network. The location of the subscriber may include Access line id (physical and logical circuit ID) defined in ETSI TS 283 034 [314], SSID and BSSID of the Access Point, defined in IEEE Std 802.11-2012 [408].
5.1.2.2.16	GGSN Address Used
This field is the current serving GGSN/P-GW IP Address for the Control Plane. If both an IPv4 and an IPv6 address of the GGSN/P-GW are available, the SGSN shall include the IPv4 address in the CDR.
5.1.2.2.16A	Void
(Void)
5.1.2.2.17	IMS Signalling Context
Indicates if the IP-CAN bearer is used for IMS signalling. It is only present if the IP-CAN bearer is an IMS signalling bearer. A IP-CAN bearer for IMS signalling is determined via the "IM CN Subsystem Signalling Flag" conveyed via the "Activate PDP context request" message from the MS to the network (refer to TS 24.008 ).
5.1.2.2.18	IMSI Unauthenticated Flag  
This field indicates that provided "Served IMSI" is not authenticated, and relates to an emergency bearer established with IMSI as identifier (refer to TS 23.060 [202] and TS 29.274 [223]). This field is missing if IMSI is authenticated, or if IMSI is not provided as identifier.
5.1.2.2.18A	IP-CAN session Type
This field defines the IP-CAN session type, e.g. IP, or PPP. PDP type format is used: See TS 29.060 [215].
5.1.2.2.18B	IP-Edge Address IPv6
This field is the IP-Edge IPv6 Address used for the Control Plane, when both IPv4 and IPv6 addresses of the IP-Edge are available.
5.1.2.2.18C	IP-Edge Address Used
This field is the IP-Edge IP Address used for the Control Plane. If both an IPv4 and an IPv6 addresses of the IP-Edge are available, the field shall include the IPv4 address.
5.1.2.2.18D	IP-Edge Operator Identifier
This field is the PMLN Identifier (Mobile Country Code and Mobile Network Code) of the Convergent Fixed-Mobile Operator owning the IP-Edge located in Fixed Broadband Access.
The MCC and MNC are coded as described for "User Location Info" in TS 29.274 [223].
5.1.2.2.18E	Last MS Time Zone
This field contains the "Time Zone" provided by the SGSN/MME and transferred to the S-GW/P-GW during the IP-CAN bearer deactivation. It is derived from 3GPP-MS-TimeZone AVP provided within PS-Information AVP, both defined in TS 32.299 [50], when received on Rf closure.
5.1.2.2.18F	Last User Location Information
This field contains the User Location Information as described in clause in 5.1.2.2.75.
The field is provided by the SGSN/MME and transferred to the S-GW/P-GW during the IP-CAN bearer deactivation. It is derived from 3GPP-User-Location-Info AVP provided at PS-Information AVP level, both defined in TS 32.299 [50], when received on Rf closure.
5.1.2.2.19	LCS Cause
The LCS Cause parameter provides the reason for an unsuccessful location request according TS 49.031 [227].
5.1.2.2.20	LCS Client Identity
This field contains further information on the LCS Client identity:
    • Client External ID;
    • Client Dialled by MS ID;
-	Client Internal ID.
5.1.2.2.21	LCS Client Type
This field contains the type of the LCS Client as defined in TS 29.002 [214].
5.1.2.2.22	LCS Priority
This parameter gives the priority of the location request as defined in TS 49.031 [227].
5.1.2.2.23	LCS QoS
This information element defines the Quality of Service for a location request as defined in TS 49.031 [227].
5.1.2.2.23A	List of RAN Secondary RAT Usage Reports
This list applicable in SGW-CDR and PGW-CDR, includes one or more containers reported from the RAN for a secondary RAT.
Each container includes the following fields:
-	Data Volume Uplink, Data Volume Downlink, Start Time, End Time and Secondary RAT Type. 
-	Data Volume Uplink includes the number of octets transmitted during the use of the packet data services in the uplink direction reported from RAN. The counting and reporting from RAN of uplink data volumes is optional.
-	Data Volume Downlink includes the number of octets transmitted during the use of the packet data services in the downlink direction reported from RAN. The counting and reporting from RAN of downlink data volumes is optional.
-	RAN Start Time is a time stamp, which defines the moment when the volume container is opened by the RAN.
-	RAN End Time is a time stamp, which defines the moment when the volume container is closed by the RAN.
-	Secondary RAT Type This field contains the RAT type for the secondary RAT. 
-	Charging ID This field contains the Charging ID of the bearer corresponding to the reported usage. Only needed if IP-CAN session level charging is applied.
5.1.2.2.24	List of Service Data
This list includes one or more service data containers. Depending on the reporting level of PCC/ADC rules, one service data container either includes charging data for one rating group or for one rating group and service id combination. Each service data container may include the following fields:
-	AF-Record-Information.
-	Charging Rule Base Name.
-	ADC Rule Base Name.
-	Data Volume Downlink.
-	Data Volume Uplink.
-	Event Based Charging Information.
-	Local Sequence Number.
-	PS Furnish Charging Information.
-	EPC Qos Information.
-	Rating Group.
-	Report Time.
-	Result Code.
-	Service Condition Change.
-	Service Identifier.
-	Service Specific Info.
-	Serving Node Address.
-	Time of First Usage.
-	Time of Last Usage.
-	Time Quota Mechanism.
-	Time Usage.
-	user location information.
-	3GPP2 User Location Information.
-	UWAN User Location Information.
-	TWAN User Location Information.
-	Sponsor Identity.
-	Application Service Provider Identity. 
-	Presence Reporting Area Status. 
-	List of Presence Reporting Area Information.
-	User CSG Information.
-	RAT Type.
-	Serving PLMN Rate Control.
-	APN Rate Control.
-	Related Change of Service Condition.
-	Traffic Steering Policy Identifier Downlink.
-	Traffic Steering Policy Identifier Uplink.
-	VoLTE Information.

-	Rating Group is the identifier of rating group. This field is mandatory. The parameter corresponds to the Charging Key as specified in TS 23.203 [203]. 
-	Charging Rule Base Name is the reference to group of PCC rules predefined at the PCEF. This field is included if any of the PCC rules, which usage is reported within this service data container, was activated by using the Charging Rule Base Name as specified in TS 29.212 [220]. In case multiple Charging Rule Base Names activate PCC rules, which usage is reported within this service data container, the P-GW/IPE-CDR shall include only one occurrence to the service data container. 
-	ADC Rule Base Name is the reference to group of ADC rules predefined at the TDF. This field is included if any of the ADC rules, which usage is reported within this service data container, was activated by using the ADC Rule Base Name as specified in TS 29.212 [220]. In case multiple ADC Rule Base Names activate ADC rules, which usage is reported within this service data container, the TDF shall include only one occurrence to the service data container.
-	Result Code contains the result code after the interconnection with the OCS. This field may be added to the service data container if online and offline charging are both used for same rating group. The result code in service data container is the value of the Result-Code AVP received within last CCA message in corresponding MSCC AVP to this service data container.
-	Local Sequence Number is a service data container sequence number. It starts from 1 and is increased by 1 for each service date container generated within the lifetime of this IP-CAN bearer/TDF session.
-	Time of First Usage is the time stamp for the first IP packet to be transmitted and mapped to the current service data container. For envelope reporting controlled by the Time Quota Mechanism, this indicates the time stamp for the first IP packet to be transmitted that causes an envelope to be opened – see TS 32.299 [50].
-	Time of Last Usage is the time stamp for the last IP packet to be transmitted and mapped to the current service data container. For envelope reporting, controlled by the Time Quota Mechanism, this indicates the time stamp for an envelope to be closed – see TS 32.299 [50] for conditions for envelope closure.
-	Time Usage contains the effective used time within the service data container recording interval.  
-	Service Condition Change defines the reason for closing the service data container (see TS 32.251 [11]), such as tariff time change, IP-CAN bearer modification (e.g. QoS change, S-GW change, user location change, user CSG information change), access change of service data flow, indirect service condition change, service usage thresholds, service idled out, termination or failure handling procedure. When one of the "CGI/SAI, ECGI or TAI or RAI Change" are reported as user location change, the dedicated value in service Condition Change is set instead of the generic "user location change" value. This field is specified as bitmask for support of multiple change trigger (e.g. S-GW and QoS change). This field is derived from Change-Condition AVP at Service-Data-Container AVP level defined in TS 32.299 [50] when received on Rf. Each value is mapped to the corresponding value in "ServiceConditionChange" field. When simultaneous change triggers are met, multiple Change-Condition values are set in field bitmask. When no Change-Condition AVP is provided, the "recordClosure" value is set for the service data container. For envelope reporting, the Service Condition Change value shall always take the value "envelopeClosure". The mechanism for creating the envelope is identified within the Time Quota Mechanism field.
-	EPC Qos Information in service specific service data containers contains the QoS applied for the service.   This is included in the first service data container. In following container EPC QoS information is present if previous change condition is "QoS change". The P-GW/TDF/IPE-CDR shall include only one EPC QoS Information occurrence to one service data container. 
-	Serving Node Address contains the valid serving node (e.g. SGSN/S-GW) control plane IP address during the service data container recording interval. 
-	Data Volume Uplink and Downlink, includes the number of octets transmitted during the service data container recording interval in the uplink and/or downlink direction, respectively. The amount of data counted in P-GW shall be as specified in clauses 5.2.1.10.1, 5.3.1.1 and 5.3.1.6.1 of TS 32.251 [11]. The amount of data counted in TDF shall be based on full payload of the data transferred. The amount of data counted in IP-Edge shall be based on full payload of the data transferred.
-	Report Time is a time stamp, which defines the moment when the service data container is closed.   
-	Service Identifier is an identifier for a service. The service identifier may designate an end user service, a part of an end user service or an arbitrarily formed group thereof. This field is only included if reporting is per combination of the rating group and service id. 
-	PS Furnish Charging Information includes charging information per rating group in case it is sent by OCS.
-	User location information contains the user location (e.g. CGI/SAI, ECGI/TAI or RAI) where the UE was located during the service data container recording interval. This is included in the service data container only if previous container's change condition is "user location change" or one of the "CGI/SAI, ECGI or TAI or RAI Change". Note the user location information in PGW-CDR/TDF-CDR main level contains the location where the UE was when PGW-CDR/TDF-CDR was opened, and the "Last user location information" in PGW-CDR main level contains the location where the UE was when PGW-CDR is closed. 
-	Presence Reporting Area Status contains the status of the UE presence (i.e. indication on whether the UE is inside or outside) in the Presence Reporting Area(s) identified by "Presence Reporting Area identifier(s)" contained in PGW-CDR main level. This is included in the service data container when the initial status is reported after opening of PGW-CDR, or if previous container’s change condition is "Presence in Presence Reporting Area Change". This field is not applicable in multiple PRA(s).
-	List of Presence Reporting Area Information contains the list of Presence Reporting Area Information. Each Presence Reporting Area Information includes the "Presence Reporting Area identifier", the status of the UE presence (i.e. indication on whether the UE is inside or outside the Presence Reporting Area or Presence Reporting Area(s) inactive), and the Node (PCRF, OCS) which subscribed-to the PRA.
-	3GPP2 User Location Information contains the 3GPP2 user location (i.e. 3GPP2-BSID: Cell-Id, SID, NID) where the UE was located during the service data container recording interval. This is included in the service data container only if previous container's change condition is "user location change". Note the "3GPP2 user location information" in PGW-CDR/TDF-CDR main level contains the location where the UE was when PGW-CDR/TDF-CDR was opened.
-	UWAN User Location Information contains the Untrusted Wireless Access Network (UWAN) user location during the service data container recording interval. This is included in the service data container only if previous container’s change condition is "user location change". Note the user location information in PGW-CDR main level contains the location where the UE was when PGW-CDR was opened.
-	TWAN User Location Information contains the user location in a Trusted WLAN Access Network during the service data container recording interval. This is included in the service data container only if previous container’s change condition is "user location change". Note the user location information in PGW-CDR/TDF-CDR main level contains the location where the UE was when PGW-CDR/TDF-CDR was opened.
-	User CSG information contains the status of the user accessing a CSG cell (CSG ID within the PLMN, Access mode and indication on CSG membership) during the service data container recording interval. This is included in the service data container only if previous container’s change condition is "user CSG information change". Note the "user CSG information" in PGW-CDR main level contains the "user CSG information" when PGW-CDR was opened. 
-	AF-Record-Information includes the "AF Charging Identifier" (ICID for IMS) and associated flow identifiers generated by the AF and received by the P-GW over Gx interfaces as defined in TS 29.212 [220]. In case usage of PCC rules, which usage is reported within the container, has different AF-Record-Information then the P-GW shall include all occurrences to the service data container.
-	Event Based Charging Information includes the number of events and associated timeStamps (each event is timestamped) during the service data container recording interval.
-	Time Quota Mechanism contains two further subfields and is included if envelope reporting is required:
-	Time Quota Type identifies the mechanism by which time based usage should be reported – as defined in TS 32.299 [50].
-	Base Time Interval identifies the length of the base time interval, for controlling the reporting of time based usage, in seconds.
-	Service Specific Info holds service specific data for a pre-defined PCC or a predefined ADC rule that is used for enhanced packet filtering.
-	Sponsor Identity identifies the sponsor willing to pay for the operator's charge for connectivity.
-	Application Service Provider Identity identifies application service provider that is delivering a service to an end user. 
-	RAT Type contains the RAT type for the IP-CAN bearer that is first reported for the Rating Group or Rating Group / Service Identifier in the container. If traffic from multiple bearers is included in the report for the container, only one field is included.
NOTE: 	Sponsor Identity and Application Service Provider Identity are not used together with Service Identification reporting. Furthermore, neither the Sponsor Identity nor Application Service Provider Identity is applicable to the TDF. 
-	Related Change of Service Condition indicates the reason a related container was closed when the current container is indirectly closed and the supplemental information for the event. This information is applicable when charging per IP-CAN session is active for a multi-access PDN connection.
-	Serving PLMN Rate Control This field contains the Serving PLMN Rate Control applied by MME during the transfer of the data volume captured by the container (applicable only to the PGW-CDR). This is included in the service data container only if previous container's change condition is "Serving PLMN Rate Control change ". Note the Serving PLMN Rate Control field in PGW-CDR main level contains the Serving PLMN Rate Control when PGW-CDR was opened. 
-	APN Rate Control This field contains the APN Rate Control applied by PGW during the transfer of the data volume captured by the container (applicable only to the PGW-CDR). This is included in the service data container only if previous container's change condition is "APN Rate Control change ". Note the APN Rate Control field in PGW-CDR main level contains the APN Rate Control when PGW-CDR was opened. 
-	Traffic Steering Policy Identifier Downlink This field contains the Traffic Steering Policy Identifier Downlink applied by PGW/ TDF during the service data container recording interval.
-	Traffic Steering Policy Identifier Uplink This field contains the Traffic Steering Policy Identifier Uplink applied by PGW/TDF during the service data container recording interval.
-	VoLTE Information This field contains the caller and callee Information of VoLTE. Caller Information of VoLTE is described in clause 5.1.3.1.24. Callee Information contains: 
-	Called Party Address (described in clause 5.1.3.1.9).
-	Requested Party Address (described in clause 5.1.3.1.43).
-  	List of Called Asserted Identity (described in clause 5.1.3.1.23).
5.1.2.2.25	List of Traffic Data Volumes
This list applicable in S-CDR, SGW-CDR, IPE-CDR, ePDG-CDR and TWAG-CDR, includes one or more containers.
This list applicable in PGW-CDR when charging per IP-CAN session is active and IP-CAN bearer charging is being performed for the session.
In SGW-CDR, PGW-CDR, IPE-CDR, ePDG-CDR and TWAG-CDR, containers are per QCI/ARP pair. This means that if QoS control within one IP-CAN bearer is applicable in S-GW, P-GW, ePDG and TWAG, there can be several containers open at same time one per each applied QCI/ARP pair.
Each container includes the following fields:
-	Data Volume Uplink, Data Volume Downlink, Change Condition and Change Time. 
-	Data Volume Uplink includes the number of octets transmitted during the use of the packet data services in the uplink direction. In MBMS charging, this field is normally to be set to zero, because MBMS charging is based on the volume of the downlink data. The counting of uplink data volumes is optional. In S-CDR this field is not present when the SGSN has successfully established Direct Tunnel between the RNC and the GGSN.
-	Data Volume Downlink includes the number of octets transmitted during the use of the packet data services in the downlink direction. In S-CDR this field is not present when the SGSN has successfully established Direct Tunnel between the RNC and the GGSN.
-	Change Condition defines the reason for closing the container (see TS 32.251 [11]), such as tariff time change, QoS change or closing of the CDR. This field is derived from Change-Condition AVP Traffic-Data-Volumes AVP level defined in TS 32.299 [40] when received on Rf. Each value is mapped to the corresponding value in "ChangeCondition" field. When no Change-Condition AVP is provided, the "recordClosure" value is set for the container. For User Location Change, when one of the "CGI/SAI, ECGI or TAI or RAI Change" are reported as user location change, the dedicated value in service Condition Change is set instead of the generic "user location change" value.  
-	Change Time is a time stamp, which defines the moment when the volume container is closed or the CDR is closed. All the active IP-CAN bearers do not need to have exactly the same time stamp e.g. due to same tariff time change (variance of the time stamps is implementation and traffic load dependent, and is out of the scope of standardisation).
-	User Location Information contains the location (e.g. CGI/SAI, ECGI/TAI or RAI) where the UE is located and used during the transfer of the data volume captured by the container (applicable only to the SGW-CDR). This is included in the Traffic data container only if previous container's change condition is "user location change". Note the user location information in SGW-CDR main level contains the location where the UE was when SGW-CDR was opened, and the "Last user location information" in SGW-CDR main level contains the location where the UE was when SGW-CDR is closed. 
-	UWAN User Location Information contains the Untrusted Wireless Access Network (UWAN) user location during the transfer of the data volume captured by the container. This is included in the Traffic data container only if previous container's change condition is "user location change". Note the user location information in ePDG-CDR main level contains the location where the UE was when ePDG-CDR was opened.
-	TWAN User Location Information contains the user location in a Trusted WLAN Access Network during the transfer of the data volume captured by the container. This is included in the Traffic data container only if previous container’s change condition is "user location change". Note the user location information in TWAG-CDR main level contains the location where the UE was when TWAG-CDR was opened.
-	Presence Reporting Area Status contains the status of the UE presence (i.e. indication on whether the UE is inside or outside) in the Presence Reporting Area(s) identified by "Presence Reporting Area identifier(s)" contained in SGW-CDR main level. This is included in the Traffic data container when the initial status is reported after opening of SGW-CDR, or if previous container’s change condition is "Presence in Presence Reporting Area Change". This field is not applicable in multiple PRA(s).
-	List of Presence Reporting Area Information contains the list of Presence Reporting Area Information. Each Presence Reporting Area Information includes the "Presence Reporting Area identifier", the status of the UE presence (i.e. indication on whether the UE is inside or outside the Presence Reporting Area or Presence Reporting Area(s) inactive). In the PGW it contains the Node (PCRF, OCS) which subscribed-to the PRA.
-	User CSG information contains the status of the user accessing a CSG cell (CSG ID within the PLMN, Access mode and indication on CSG membership) during the transfer of the data volume captured by the container. This is included in the Traffic data container only if previous container’s change condition is "user CSG information change". Note the "user CSG information" in S-CDR/SGW-CDR main level contains the "user CSG information" when S-CDR/SGW-CDR was opened.
-	EPC QoS Information In case of IP-CAN bearer specific container this contains authorized QoS for the IP-CAN bearer. First container for each QCI/ARP pair includes this field. In following containers this field is present if previous change condition is "QoS change". This field is applicable only in SGW-CDR, PGW-CDR, IPE-CDR, ePDG-CDR, and TWAG-CDR.
In S-CDR first container includes following optional fields: QoS Requested and QoS Negotiated. In following containers QoS Negotiated is present if previous change condition is "QoS change". In addition to the QoS Negotiated parameter the QoS Requested parameter is present in following containers if the change condition is "QoS change" and the QoS change was initiated by the MS via a IP-CAN bearer modification procedure.
Table 5.1.2.2.25.1 illustrates an example for S-CDR but same principles are applicable also for SGW-CDR, PGW-CDR, IPE-CDR, ePDG-CDR and TWAG-CDR. There are five containers (sets of volume counts) caused by one QoS change, one location change, one tariff time change and one Direct Tunnel establishment (direct tunnel change applicable in S-CDR only). When CDR is opened the subscriber is in CGI1.
Table 5.1.2.2.25.1: Example list of traffic data volumes
QoS Requested = QoS1

QoS Negotiated = QoS1

Data Volume Uplink = 1
Data Volume Downlink = 2

Change Condition = QoS change
Time Stamp = TIME1
QoS Requested = QoS2 (if requested by the MS)
QoS Negotiated = QoS2

Data Volume Uplink = 5
Data Volume Downlink = 6

Change Condition = Tariff change
Time Stamp = TIME2




Data Volume Uplink = 10
Data Volume Downlink = 3

Change Condition = CGI/SAI Change
Time Stamp = TIME3


Data Volume Uplink = 3
Data Volume Downlink = 4

User Location Info = CGI2

Change Condition = Direct Tunnel establishment Occurrence
Time Stamp = TIME4


Change Condition = Record closed
Time Stamp = TIME5

First container includes initial QoS values and corresponding volume counts. Second container includes new QoS values and corresponding volume counts before tariff time change. Third container includes the indication of location change and corresponding volume counts before the location change and after the tariff time change. Fourth container includes volume counts after the location change and contains the indication of Direct Tunnel establishment. Last container includes no volume count as it refers to Direct Tunnel establishment. The total volume counts can be itemised as shown in Table 5.1.2.2.25.2 (tariff1 is used before and tariff2 after the tariff time change):
Table 5.1.2.2.25.2: Itemised list of total volume count corresponding to table 5.1.2.2.25.1


Container
QoS1+Tariff1
uplink = 1, downlink = 2
1
QoS2+Tariff1
uplink = 5, downlink = 6
2
QoS2+Tariff2
uplink = 13, downlink = 7
3+4
QoS1
uplink = 1, downlink = 2
1
QoS2
uplink = 18, downlink = 13
2+3+4
Tariff1 
uplink = 6, downlink = 8
1+2
Tariff2 
uplink = 13, downlink = 7
3+4
CGI1
uplink = 16, downlink = 11
1+2+3
CGI2
uplink = 3, downlink = 4
4
No Direct Tunnel
uplink = 19, downlink = 15
1+2+3+4
Direct Tunnel 
-, -
5

The amount of data counted in the S-GW shall be the payload of the user plane at the S1-U/S4/S2interface. Therefore the data counted already includes the IP PDP bearer protocols i.e. IP or PPP.
The data volume counted in the SGSN is dependent on the system. For GSM SGSN the data volume is the payload of the SNDCP PDUs at the Gb interface. For UMTS-SGSN it is the GTP-U PDUs at the Iu-PS interface. Therefore, in both systems, the data counted already includes the overheads of any PDP bearer protocols.
In GSM, in order to avoid that downstream packets transmitted from the old SGSN to the new SGSN at inter SGSN RA update induce the increase of the PDP CDR downstream volume counters in both SGSN the following rules shall be followed: 
-	For PDP contexts using LLC in unacknowledged mode: an SGSN shall update the PDP CDR when the packet has been sent by the SGSN towards the MS;
	For PDP contexts using LLC in acknowledged mode, a GSM-SGSN shall only update the PDP CDR at the reception of the acknowledgement by the MS of the correct reception of a downstream packet. In other worlds, for inter SGSN RA update, the new SGSN shall update the PDP CDR record when a downstream packet sent by the old SGSN is received by the MS and acknowledged by the MS towards the new SGSN through the RA update complete message. 
In UMTS, the not transferred downlink data can be accounted for in the S-CDR with "RNC Unsent Downlink Volume" field, which is the data that the RNC has either discarded or forwarded during handover. Data volumes retransmitted (by RLC or LLC) due to poor radio link conditions shall not be counted.
The following additional fields are applicable in the P-GW CDR when charging per IP-CAN session is active and IP-CAN bearer charging is being performed for the session:
-	Charging Id In case of IP-CAN bearer specific container this contains the charging Id assigned to the bearer. 
-	RAT Type This field contains the RAT type for the current IP-CAN bearer.
-	Access Availability Change Reason indicates the reason why the availability of an access is changed by the PCEF, i.e. RAN rule indication or Access usable/unusable as defined in TS 29.212 [220].
-	Related Change of Charging Condition indicates the reason a related container was closed when the current container is indirectly closed and the supplemental information for the event. This information is applicable when charging per IP-CAN session is active for a multi-access PDN connection.
-	Diagnostics In case of IP-CAN bearer specific container this contains the Diagnostics as per clause 5.1.2.2.11 associated to the bearer. 
-	Enhanced Diagnostics In case of IP-CAN bearer specific container this contains the Enhanced Diagnostics as per clause 5.1.2.2.13Aa associated to the bearer. 
-	CP CIoT EPS optimisation indicator This field contains the indication on whether Control Plane CIoT EPS optimisation is used for the transfer of the data volume captured by the container. This is included in the Traffic data container only if previous container's change condition is "change in user plane to UE". Note the CP CIoT EPS Optimisation indicator field in SGW-CDR main level contains the CP CIoT EPS optimisation indicator value when SGW-CDR was opened. 
-	Serving PLMN Rate Control This field contains the Serving PLMN Rate Control applied by MME during the transfer of the data volume captured by the container (applicable to the SGW-CDR and PGW-CDR). For the SGW-CDR this is included in the Traffic data container only if previous container's change condition is " Serving PLMN Rate Control change ". Note the Serving PLMN Rate Control field in SGW-CDR main level contains the Serving PLMN Rate Control when SGW-CDR was opened. For the PGW-CDR this is included when List of Traffic Data Volumes is present, charging per IP-CAN session is active and IP-CAN bearer charging is being performed for the session.
-	APN Rate Control This field contains the APN Rate Control applied by PGW during the transfer of the data volume captured by the container (applicable only to the PGW-CDR). This is included in the Traffic data container only if previous container's change condition is "APN Rate Control change ". Note the APN Rate Control field in PGW-CDR main level contains the APN Rate Control when PGW-CDR was opened.
5.1.2.2.26	Local Record Sequence Number
This field includes a unique record number created by this node. The number is allocated sequentially for each partial CDR (or whole CDR) including all CDR types. The number is unique within one node, which is identified either by field Node ID or by record-dependent node address (SGSN address, S-/P-GW address, TDF address, IP-Edge Address, Recording Entity).
The field can be used e.g. to identify missing records in post processing system.
5.1.2.2.27	Location Estimate
The Location Estimate field is providing an estimate of a geographic location of a target MS according to TS 29.002 [214].
5.1.2.2.28	Location Method
The Location Method identifier refers to the argument of LCS-MOLR that was invoked as defined in TS 24.080 [209].
5.1.2.2.29	Location Type
This field contains the type of the location as defined in TS 29.002 [214].
5.1.2.2.29A	Low Priority Indicator
This field indicates if the PDN connection has a low priority, i.e. for Machine Type Communication.
5.1.2.2.29B	NBIFOM Mode
This field indicates the NBIFOM mode selected by PCRF for a multi-access PDN connection, i.e. UE initiated or Network initiated as defined in TS 29.212 [220]. 
5.1.2.2.29C	NBIFOM Support
This field indicates that NBIFOM was requested by the UE, supported and accepted by the network for the IP-CAN session or if NBIFOM is not supported for the IP-CAN session as defined in TS 29.212 [220].
5.1.2.2.30	Measurement Duration
This field contains the duration for the section of the location measurement corresponding to the Perform_Location_Request and Perform_Location_Response by the SGSN.
5.1.2.2.31	Message reference
This field contains a unique message reference number allocated by the Mobile Station (MS) when transmitting a short message to the service centre. This field corresponds to the TP-Message-Reference element of the SMS_SUBMIT PDU defined in TS 23.040 [201].
5.1.2.2.32	MLC Number
This parameter refers to the ISDN (ITU-T Rec. E.164 [308]) number of a GMLC.
5.1.2.2.32A	MME Name
This field contains the Diameter Identity of the serving MME.
5.1.2.2.32B	MME Realm
This field contains the Diameter Realm Identity of the serving MME.
5.1.2.2.33	MS Network Capability
This MS Network Capability field contains the MS network capability value of the MS network capability information element of the served MS on PDP context activation or on GPRS attachment as defined in TS 24.008 [208]. 
5.1.2.2.34	MS Time Zone
This field contains the 'Time Zone' IE provided by the SGSN/MME and transferred to the S-GW/P-GW/TDF during the IP-CAN bearer activation/modification procedure as specified in TS 29.060 [215] and in TS 29.212 [220].
5.1.2.2.35	Network Initiated PDP Context
This field in S-CDR indicates that PDP context is network initiated. The field is missing in case of mobile activated PDP context. 
5.1.2.2.36	Node ID
This field contains an optional, operator configurable, identifier string for the node that had generated the CDR. 
The Node ID may or may not be the DNS host name of the node. 
5.1.2.2.37	Notification to MS user
This field contains the privacy notification to MS user that was applicable when the LR was invoked as defined in TS 29.002 [214].
5.1.2.2.37A	Originating Address
This field is the Originating Address of the SME as defined in TS 23.040 [201].
5.1.2.2.37B	P-GW Address IPv6
This field is the P-GW IPv6 Address used for the Control Plane, when both IPv4 and IPv6 addresses of the P-GW are available.
5.1.2.2.38	P-GW Address Used
These field is the serving P-GW IP Address for the Control Plane. If both an IPv4 and an IPv6 address of the P-GW is available, the P-GW shall include the IPv4 address in the CDR.
5.1.2.2.39	P-GW PLMN Identifier
This field is the P-GW PMLN Identifier (Mobile Country Code and Mobile Network Code).
The MCC and MNC are coded as described for "User Location Info" in TS 29.274 [223].
5.1.2.2.40	PDN Connection Charging ID
This field defines the PDN connection (IP-CAN session) Charging identifier to identify different records belonging to same PDN connection. For a PDN connection that is limited to use one single access at a time this field includes Charging Id of first IP-CAN bearer activated. Together with P-GW address this uniquely identifies the PDN connection. 
For application based charging by the TDF:
-	In case of GTP based connectivity, an "EPS default bearer Charging Identifier" 
-	In case of PMIP based connectivity, an "unique Charging Id" 
is assigned by the P-GW and transferred to the TDF via the PCRF for the TDF session.
5.1.2.2.41	PDP Type
This field defines the PDP type, e.g. IP, or PPP as per TS 29.060 [215] .  
5.1.2.2.42	PDP/PDN Type
This field defines the bearer type, e.g. IP, or PPP as per TS 29.060 [215] .  
5.1.2.2.42A	PDP/PDN Type Extension
This field defines the PDN type as per TS 29.061 [216] for Non-IP PDN Type.
5.1.2.2.43	Positioning Data
This information element is providing positioning data associated with a successful or unsuccessful location attempt for a target MS according TS 49.031 [227].
5.1.2.2.43A	Presence Reporting Area Information
This field contains the Presence Reporting Area Information: Presence Reporting Area identifier(s) and the indication on whether the UE is inside or outside the Presence Reporting Area(s), as described in TS 29.274 [223].  
5.1.2.2.44	Privacy Override
This parameter indicates if the LCS client overrides MS privacy when the GMLC and VMSC/SGSN for an MT-LR are in the same country as defined in TS 29.002 [214].
5.1.2.2.45	PS Furnish Charging Information
This field includes following information elements for IP-CAN bearer (PGW-CDR) , for TDF session (TDF-CDR) , or for the IP-CAN session (IPE-CDR):
    • PS Free Format Data 

This field contains charging information sent by the OCS in the Diameter Credit-Control Credit-Control-Answer messages as defined in TS 32.251 [11]. The data can be sent either in one Diameter Credit-Control Credit-Control-Answer message or several Diameter Credit-Control Credit-Control-Answer messages with append indicator. This data is transferred transparently in the PS Furnish Charging Information field of the relevant call records.
If the PS Free Format Data is received more than once during one IP-CAN bearer for which an offline session is established, the append indicator defines whether the PS Free Format Data is appended to previous received PS Free Format Data and stored in the relevant record or the information of the last PS Free Format Data received is stored in the relevant record (the previous PS Free Format Data information shall be overwritten). 
In the event of partial output the currently valid "PS Free format data" is stored in the partial record.
    • PS FFD Append Indicator:

This field contains an indicator whether PS free format data is to be appended to the PS free format data stored in previous partial CDR. This field is needed in CDR post processing to sort out valid PS free format data for that IP-CAN bearer from sequence of partial records. Creation of partial records is independent of received PS Free Format Data and thus valid PS  free format data may be divided to different partial records. 
 If field is missing then the PS free format data in this CDR replaces all received PS free format data in previous CDRs. Append indicator is not needed in the first partial record. In following partial records indicator shall get value true if all PS Free Format Data received during that partial record have append indicator. If one or more of the received PS Free Format Data for that PDP Context during the partial record do not have append indicator then this field shall be missing. 
5.1.2.2.46	QoS Requested/QoS Negotiated
Quality of Service Requested contains the QoS desired by MS at IP-CAN bearer activation. QoS Negotiated indicates the applied QoS accepted by the network.
If a pre-Release '99 only capable terminal is served, the applicable QoS parameters and their encoding in the CDRs are specified in TS 32.015 [228].
In all other cases, the applicable QoS attributes are defined in the "Quality of Service profile" in TS 23.060 [202], and their encoding in the CDR corresponds to the "Quality of Service profile" specified in TS 29.060 [215].
5.1.2.2.46A	RAN End Time
This field contains the time when the RAN closes the volume container, and is available in the CDR for the secondary RAT.
5.1.2.2.46B	RAN Start Time
This field contains the time when the RAN opens the volume container, and is available in the CDR for the secondary RAT.
5.1.2.2.47	RAT Type
Holds the value of RAT Type, as provided to S-GW and P-GW, specified in TS 29.061 [216] and also provided to the TDF as specified in TS 29.212 [220].
The field is provided by the SGSN/MME and transferred to the S-GW/P-GW during the IP-CAN bearer activation/modification and transferred to the TDF during the TDF session establishment/modification.
5.1.2.2.48	Record Extensions
This field enables network operators and/or manufacturers to add their own recommended extensions to the standard record definitions. This field contains a set of "management extensions" as defined in X.721 [305]. 
This is conditioned upon the existence of an extension.
5.1.2.2.49	Record Opening Time
This field contains the time stamp when the MS is attached to a SGSN (M-CDR) or IP-CAN bearer is activated in SGSN/S-GW/P-GW (S-CDR, SGW-CDR, PGW-CDR) or TDF session is established, or IP-CAN session is established (IPE-CDR), or record opening time on subsequent partial records (see TS 32.250 [4] for exact format).
Record opening reason does not have a separate field. For SGW/PGW/TDF/IPE -CDRs and M-CDR it can be derived from the field "Sequence number"; i.e. either a missing field or a value one (1) means activation of IP-CAN bearer (SGW/PGW-CDR) or GPRS attachment (M-CDR) or TDF session establishment (TDF-CDR) , or IP-CAN session establishment (IPE-CDR). For the S-CDR the field "SGSN change" also needs to be taken into account.
5.1.2.2.50	Record Sequence Number
This field contains a running sequence number employed to link the partial records generated in the SGSN/SGW/PGW for a particular MM context or IP-CAN bearer, or IP-CAN session, or TDF session (characterised with the same Charging ID and PGW address pair). For M-CDR or S-CDR the sequence number always restarts from one (1) after an inter-SGSN routing area update, see field "SGSN change". The Record Sequence Number is missing if the record is the only one produced in the SGSN/SGW/PGW/TDF/IP-Edge (e.g. inter-SGSN routing area update can result to two M-CDR or two S-CDRs without sequence number and field "SGSN change" present in the second record).
5.1.2.2.51	Record Type
The field identifies the type of the record e.g. S-CDR, SGW-CDR, PGW-CDR, M-CDR, S-SMO-CDR, TDF-CDR, IPE-CDR and S-SMT-CDR.
5.1.2.2.52	Recording Entity Number
This field contains the E.164 number assigned to the entity that produced the record. For further details see TS 23.003 [200].
5.1.2.2.52A	Retransmission
This parameter, when present, indicates that information from retransmitted Diameter ACRs has been used in this CDR.
5.1.2.2.53	RNC Unsent Downlink Volume
This field contains the unsent downlink volume that the RNC has either discarded or forwarded to 2G-SGSN and already included in S-CDR. This field is present when RNC has provided unsent downlink volume count at RAB release and can be used by a downstream system to apply proper charging for this PDP context. 
5.1.2.2.54	Routing Area Code/Location/Cell Identifier/Change of location
These fields can occur only in SGSN generated CDRs. The location information contains a combination of the Routing Area Code (RAC) and an optional Cell Identifier of the routing area and cell in which the served party is currently located. In GSM the Cell Identifier is defined by the Cell Identity (CI) and in UMTS by the Service Area Code (SAC). Any change of location (i.e. Routing Area change) may be recorded in the change of location field including the time at which the change took place.
The location field contains a combination of the location area code (LAC), cell identity (CI) and MCC+MNC of the cell in which the served party is currently located.
The change of location field is optional and not required if partial records are generated when the location changes.
The RAC and (optionally) CI are coded according to 3G TS 24.008 [208] and the SAC according  TS 25.413 [212].
5.1.2.2.54A	S-GW Address IPv6
This field is the S-GW IPv6 Address used for the Control Plane, when both IPv4 and IPv6 addresses of the S-GW are available.
5.1.2.2.55	S-GW Address Used
These field is the serving S-GW IP Address for the Control Plane. If both an IPv4 and an IPv6 address of the S-GW is available, the S-GW shall include the IPv4 address in the CDR.
5.1.2.2.56	S-GW Change
This field is present only in the SGW-CDR ,ePDG-CDR or TWAG-CDR to indicate that this is the first record after an inter serving node change (change from SGW, ePDG, TWAG, HSGW).
5.1.2.2.56A	Secondary RAT Type
Holds the value of Secondary RAT Type, as provided by the RAN.
The field is provided by the RAN and transferred to the S-GW/P-GW in the RAN Traffic Volume element.
5.1.2.2.57	Served 3GPP2 MEID 
This field contains the Mobile Equipment Identity of the user's terminal in 3GPP2 access, and the content is defined in  TS 29.272 [222].
5.1.2.2.57A	Served Fixed Subscriber Id
This field contains the subscriber identity, as defined in Broadband Forum TR 134 [601], used by the Fixed User (i.e. Fixed Device or RG) for Subscriber IP session in fixed broadband access network.
5.1.2.2.58	Served IMEI
This field contains the International Mobile Equipment Identity (IMEI) of the equipment served, if available. The term "served" equipment is used to describe the ME involved in the transaction recorded e.g. the called ME in the case of a network initiated PDP context. 
The structure of the IMEI is specified in TS 23.003 [200] and the encoding defined in TS 29.274 [223].
5.1.2.2.58A	SCS/AS Address
This field contains the Address of SCS/AS.
5.1.2.2.59	void
5.1.2.2.60	Served IMSI
This field contains the International Mobile Subscriber Identity (IMSI) of the served party. The term "served" party is used to describe the mobile subscriber involved in the transaction recorded e.g. the calling subscriber in case of a mobile initiated PDP context.
The structure of the IMSI is defined in TS 23.003 [200].
5.1.2.2.60A	Served IP-CAN session Address
This field contains the IP address for the IP-CAN session. This is a network layer address i.e. of type IPv4 address or IPv6 prefix. The address for each IP-CAN session type is allocated either temporarily or permanently (see "Dynamic Address Flag"). This parameter shall be present except when both the IP-CAN session type is PPP and dynamic address assignment is used.
5.1.2.2.60B	Served IP-CAN session Address Extension
This field contains the IPv4 address for the IP-CAN session when dual-stack IPv4 IPv6 is used, and the IPv6 prefix is included in Served IP-CAN session Address or Served IP-CAN Address.
5.1.2.2.61	Served MN NAI
This field contains the Mobile identifier of the served user, in NAI format based on IMSI, as defined TS 23.003 [200].  
5.1.2.2.62	Served MSISDN
This field contains the Mobile Station (MS) ISDN number (MSISDN) of the served party. The term "served" party is used to describe the mobile subscriber involved in the transaction recorded. In case of multi-numbering the MSISDN stored in a CDR will be the primary MSISDN of the calling party. 
The structure of the MSISDN is defined in TS 23.003 [200].
5.1.2.2.63	Served PDP Address
This field contains the PDP address of the served IMSI. This is a network layer address i.e. of type IPv4 address or IPv6 prefix. The address for each PDP type is allocated either temporarily or permanently (see "Dynamic Address Flag"). This parameter shall be present except when both the PDP type is PPP and dynamic PDP address assignment is used. 
5.1.2.2.64	Served PDP/PDN Address
This field contains the IP address for the PDN connection (PDP context, IP-CAN bearer). This is a network layer address i.e. of type IPv4 address or IPv6 prefix. The address for each Bearer type is allocated either temporarily or permanently (see "Dynamic Address Flag"). This parameter shall be present except when both the Bearer type is PPP and dynamic address assignment is used.
5.1.2.2.64A	Served PDP/PDN Address Extension
This field contains the IPv4 address for the PDN connection (PDP context, IP-CAN bearer) when dual-stack IPv4 IPv6 is used, and the IPv6 prefix is included in Served PDP Address or Served PDP/PDN Address. 
5.1.2.2.64B	Served PDP/PDN Address prefix length
This field contains the prefix length of an IPv6 typed Served PDP/PDN Address. The field needs not available for prefix length of 64 bits, as in this case the 64 bit prefix length default shall be assumed.
5.1.2.2.65	Service Centre Address
This field contains a E.164 number identifying a particular service centre e.g. Short Message Service (SMS) centre (see TS 23.040 [201]).
5.1.2.2.66	Serving Node Address
These fields contain one or several control plane IP addresses of SGSN, MME, ePDG, HSGW, TWAG or S-GW, which have been connected during the record.
If both an IPv4 and an IPv6 address of the SGSN/S-GW/MME/ePDG/HSGW/TWAG are available, the S-GW/P-GW/TDF shall include the IPv4 address in the CDR.
5.1.2.2.66A	Serving Node IPv6 Address
These fields contain one or several control plane IPv6 addresses, in case of IPv4v6 dual stack, of SGSN, MME, ePDG, HSGW, TWAG or S-GW, which have been connected during the record, when both IPv4 and IPv6 addresses of the node are available.
5.1.2.2.67	Serving Node PLMN Identifier
This field contains  the PLMN Identifier (Mobile Country Code and Mobile Network Code) serving the UE. 
The MCC and MNC are coded as described for 'Routing Area Identity' in TS 29.060 [75].
5.1.2.2.68	Serving Node Type
These fields contain one or several serving node types in control plane of S-GW or P-GW, which have been connected during the record. The serving node types listed here map to the serving node addresses listed in the field "Serving node Address" in sequence.
For Originated and Terminated SMS CDRs, this field contains the Node Type which generates the CDRs, i.e. SGSN or MME.  
5.1.2.2.68A	Serving PLMN Rate Control  
This field contains the Serving PLMN Rate Control as specified in TS 23.401 [245], which is used during the record for the PDN connection to the PGW. 
5.1.2.2.68B	SGi PtP Tunnelling Method 
This field indicates whether SGi PtP tunnelling method is based on UDP/IP or other methods for a non-IP PDN type PDN connection.  
5.1.2.2.69	SGSN Address
These fields contain one or several IP addresses of SGSN. The IP address of the SGSN can be either control plane address or user plane address.
The S-CDR fields contain single address of current SGSN.
The M-CDR fields only contain the address of the current SGSN.
If both an IPv4 and an IPv6 address of the SGSN are available, the SGSNs shall include the IPv4 address in the CDR.
5.1.2.2.69A	Void
(Void).
5.1.2.2.70	SGSN Change
This field is present only in the S-CDR to indicate that this is the first record after an inter-SGSN routing area update.
5.1.2.2.71	Short Message Service (SMS) Result
This field contains the result of an attempt to deliver a short message either to a service centre or to a mobile subscriber (see TS 29.002 [214]). Note that this field is only provided if the attempted delivery was unsuccessful.
5.1.2.2.72	Start Time 
This field contains the time when the IP-CAN session starts at the S-GW/P-GW/IP-Edge or TDF session starts at TDF, available in the CDR for the first bearer in an IP-CAN session in case of S-GW/P-GW/IP-Edge or, alternatively, available in the CDR for the TDF session start.
5.1.2.2.73	Stop Time 
This field contains the time when the IP-CAN session is terminated at the S-GW/P-GW/IP-Edge or TDF session terminated at the TDF, available in the CDR for the last bearer in an IP-CAN session in case of S-GW/P-GW/IP-Edge or, alternatively, available in the CDR for the TDF session stop. 
5.1.2.2.73aA 	TDF Address Used
This field is the serving TDF IP Address for the Control Plane. If  both an IPv4 and an IPv6 addresses of the TDF are available, the TDF shall include the IPv4 address in the CDR. It contains the TDF-IP-Address as described in TS 29.212 [220].
5.1.2.2.73bA 	TDF IPv6 Address Used
This field is the serving TDF IPv6 Address for the Control Plane, when both IPv4 and IPv6 addresses of the TDF are available. 
5.1.2.2.73cA 	TDF PLMN Identifier
This field is the TDF PMLN Identifier (Mobile Country Code and Mobile Network Code).
5.1.2.2.73cAa	Traffic Steering Policy Identifier Uplink
This field contains traffic steering policy identifier in the uplink direction as specified in TS 23.203[203].
5.1.2.2.73cAb	Traffic Steering Policy Identifier Downlink
This field contains traffic steering policy identifier in the downlink direction as specified in TS 23.203[203].
5.1.2.2.73dA	TWAG Address Used
This field is the serving TWAG IP Address for the Control Plane. If both an IPv4 and an IPv6 address of the TWAG is available, the TWAG shall include the IPv4 address in the CDR.
5.1.2.2.73eA	TWAG IPv6 Address 
This field is the serving TWAG IPv6 Address for the Control Plane, when both IPv4 and IPv6 addresses of the TWAG are available. 
5.1.2.2.73A	TWAN User Location Information  
This field holds the UE location in a Trusted WLAN Access Network (defined as TWAN Identifier in TS 29.274 [223]).
5.1.2.2.73B	UNI PDU CP Only Flag  
This field contains an indication on whether this PDN connection is applied with "Control Plane Only flag", i.e. transfer using Control Plane NAS PDUs only, when Control Plane CIoT EPS Optimisation is enabled. This field is missing if both, user plane and control plane UNI for PDU transfer (i.e.  S1-U and S11-U from S-GW) are allowed, when Control Plane CIoT EPS Optimisation is enabled. 
5.1.2.2.74	User CSG Information 
This field contains the "User CSG Information" status of the user accessing a CSG cell: it comprises CSG ID within the PLMN, Access mode and indication on CSG membership for the user when hybrid access applies, as defined in TS 29.060 [215] for GPRS case, and in TS 29.274 [223] for EPC case.  
5.1.2.2.75	User Location Information
This field contains the User Location Information as described in 
-	TS 29.060 [215] for GTP case (e.g. CGI, SAI, RAI), 
-	TS 29.274 [223] for eGTP case (e.g. CGI, SAI, RAI TAI and ECGI) and 
-	TS 29.275 [224] for PMIP case.
The field is provided by the SGSN/MME and transferred to the S-GW/P-GW/TDF during the IP-CAN bearer activation/modification and/or TDF session establishment/modification.
5.1.2.2.75A	User Location Information Time
This field contains the time at which the UE was last known to be in the location which is reported during bearer deactivation or UE detach procedure.
5.1.2.2.76	Void
5.1.2.2.77	UWAN User Location Information  
This field contains the UE location in an Untrusted Wireless Access Network (UWAN) which includes the UE local IP address and optionally either UDP source port number (if NAT is detected) or TCP source port number. It may also include WLAN location information the ePDG may have received from the 3GPP AAA server about the UE, as TWAN Identifier defined in TS 29.274 [223].
5.1.2.3	Void
5.1.2.4	CP data transfer domain CDR parameters
5.1.2.4.1	Introduction
This subclause contains the description of the CDR parameters that are specific to the CP data transfer domain CDR types as specified in TS 32.253 [13].
5.1.2.4.2	Access Point Name (APN) Network Identifier
These fields contain the actual connected Access Point Name Network Identifier. APN selection by the MME for  SCEF based delivery mechanism selection for non-IP data delivery is specified in TS 23.682 [243]   
The APN Network Identifier (NI portion) is part of APN, which format is specified in TS 23.003 [200]. To represent the APN NI in the CPCN CDRs, the "dot" notation shall be used.
5.1.2.4.3	APN Rate Control  
This field contains the APN Rate Control as specified in TS 29.128 [244], which is used during the record for the PDN connection to the SCEF. 
5.1.2.4.4	Cause for Record Closing
This field contains a reason for the release of the CDR. In case of Rf interface is used, it is derived, when received, from  Change-Condition AVP at PS-information AVP level defined in TS 32.299 [50] used for CP data transfer. The following is included:
-	normal release: PDN connection to SCEF release; It corresponds to "Normal Release" in Change-Condition AVP.
-	abnormal termination (PDN connection to SCEF); It corresponds to "Abnormal Release" in Change-Condition AVP.
-	data volume limit; It corresponds to "Volume Limit" in Change-Condition AVP.
-	time (duration) limit; It corresponds to "Time Limit" in Change-Condition AVP.
-	maximum number of NIDD submissions. It corresponds to "Maximum number of NIDD submissions" in Change-Condition AVP.
-	Serving Node change; It corresponds to "Serving Node Change" in Change-Condition AVP and is used for MME change.
-	For SCEF, PLMN change; It corresponds to "PLMN Change" in Change-Condition AVP.
-	For SCEF: APN Rate Control Change: It corresponds to "APN Rate Control Change" in Change-Condition AVP.
-	Serving PLMN Rate Control Change: It corresponds to "Serving PLMN Rate Control Change" in Change-Condition AVP.
-	RAT type Change: It corresponds to "RAT Change " in Change-Condition AVP.
-	management intervention (request due to O&M reasons); It corresponds to "Management Intervention" in Change-Condition AVP.
A more detailed reason may be found in the Diagnostics field.
5.1.2.4.5	Charging Characteristics
The Charging Characteristics field allows the operator to apply different kind of charging methods in the CDRs. 
A subscriber may have Charging Characteristics assigned to his subscription. These characteristics can be supplied by the HSS and selected according to the rules specified in Annex X of TS 32.253 [13]. 
This information can be used by the CPCNs (SCEF, IWK-SCEF, MME) to activate charging generation and e.g. control the closure of the CDR or the traffic volume containers, and applied charging characteristics is included in CDRs transmitted via the Ga/Rf reference point. It can also be used in nodes handling the CDRs (e.g., the CGF or the billing system) to influence the CDR processing priority and routing. These functions are accomplished by specifying the charging characteristics as sets of charging profiles and the expected behaviour associated with each profile. 
The interpretations of the profiles and their associated behaviours can be different for each PLMN operator and are not subject to standardisation. In the present document only the charging characteristic formats and selection modes are specified.
The format of charging characteristics field is depicted in Figure 5.1.2.4.5.1. Each Bx (x =0..15) refers to a specific behaviour defined on a per-Operator basis, indicated as active when set to "1" value. See Annex X of TS 32.253 [13]. for guidance on how behaviours could be defined.

Figure 5.1.2.4.5.1: Charging Characteristics flags
5.1.2.4.6	Charging Characteristics selection mode
This field indicates the charging characteristic type that the CPCNs (SCEF, IWK-SCEF, MME) applied to the CDR. In the MME the allowed values are:
-	Home default;
-	Roaming default;
-	APN specific;
-	Subscription specific.
In the IWK-SCEF/SCEF the allowed values are:
-	Home default;
-	Roaming default;
-	Serving node supplied.
Further details are provided in TS 32.253 [13] Annex X.   
5.1.2.4.7	Charging ID 
This field is a charging identifier, which can be used together with SCEF Identity to identify all records produced in CPCN Nodes involved in a single PDN connection to a SCEF. Charging ID is generated by SCEF at PDN connection establishment and transferred to IWK-SCEF/MME., The charging ID is transferred to the new MME, at MME change during the lifetime of the PDN connection.
Different SCEFs allocate the charging ID independently of each other and may allocate the same numbers. 
The CGF and/or BS may check the uniqueness of each charging ID together with the SCEFs address and optionally (if still ambiguous) with the record opening time stamp.

5.1.2.4.8	Diagnostics
This field includes a more detailed technical reason for the releases of the connection. 
The diagnostics may also be extended to include manufacturer and network specific information.
5.1.2.4.9	Duration
This field contains the relevant duration in seconds for PDN connection to SCEF in CPCN Node CDRs.  
It is the duration from Record Opening Time to record closure. For partial records this is the duration of the individual partial record and not the cumulative duration.
It should be noted that the internal time measurements may be expressed in terms of tenths of seconds or even milliseconds and, as a result, the calculation of the duration may result in the rounding or truncation of the measured duration to a whole number of seconds.
Whether or not rounding or truncation is to be used is considered to be outside the scope of the present document subject to the following restrictions:
1)	A duration of zero seconds shall be accepted providing that the transferred data volume is greater than zero.
2)	The same method of truncation/rounding shall be applied to both single and partial records.
5.1.2.4.10	 External-Identifier
This field contains the external identifier of the UE, which identifies a subscription associated to an IMSI, as specified in TS 23.003 [200].  
5.1.2.4.11	List of NIDD Submissions
This list applicable in CPDT-SCE-CDR and CPDT-SNN-CDR, includes one or more containers.
Each container includes the following fields:
-	Submission Timestamp;
-	Event Timestamp;
-	Data Volume Uplink.
-	Data Volume Downlink. 
-	Service Change Condition.
-	Submission Result Code.
SubmissionTimestamp is a time stamp, which defines the moment when the data transfer request NIDD submission was submitted to the CPCN Node. 
Event Timestamp is a time stamp, which defines the moment when the event triggered the generation of charging information from the CPCN Node, for the NIDD submission.  
Data Volume Uplink and Downlink includes the number of octets transmitted during the NIDD submission. 
Service Change Condition contains the reason for the NIDD submission container, e.g. NIDD submission response receipt, NIDD submission response sending, NIDD delivery to the UE, NIDD submission timeout, NIDD delivery from the UE error.
Submission Result Code defines the result of NIDD submission.   
5.1.2.4.12	Local Record Sequence Number
This field includes a unique record number created by this node. The number is allocated sequentially for each partial CDR (or whole CDR) including all CDR types. The number is unique within one node, which is identified either by field Node ID or by record-dependent node identities (SCEF F, MME Identity).
The field can be used e.g. to identify missing records in post processing system.

5.1.2.4.13	Node ID
This field contains an optional, operator configurable, identifier string for the node that had generated the CDR. 
The Node ID may or may not be the DNS host name of the node. 
5.1.2.4.14	RAT Type
This field contains the Radio Access Technology (RAT) type used for the NIDD submissions.
5.1.2.4.15	Record Extensions
This field enables network operators and/or manufacturers to add their own recommended extensions to the standard record definitions. This field contains a set of "management extensions" as defined in X.721 [305]. 
This is conditioned upon the existence of an extension.
5.1.2.4.16	Record Opening Time
This field contains the time stamp when the PDN connection to SCEF is activated in CPDT-SCE-CDR, CPDT-IWK-CDR, CPDT-MME-CDR, or record opening time on subsequent partial records.
Record opening reason does not have a separate field. For CPDT-SCE-CDR, CPDT-IWK-CDR and CPDT-MME-CDR, it can be derived from the field "Sequence number"; i.e. either a missing field or a value one (1) means activation of PDN connection to SCEF.
5.1.2.4.17	Record Sequence Number
This field contains a running sequence number employed to link the partial records generated in the SCEF/IWK-SCEF/MME for a particular PDN connection to SCEF (characterised with the same Charging ID and SCEF ID pair). The Record Sequence Number starts from one (1). The Record Sequence Number is missing if the record is the only one produced in the SCEF/IWK-SCEF/MME.
5.1.2.4.18	Record Type
The field identifies the type of the record i.e. CPCN-SCE-CDR and CPCN-SNN-CDR.
5.1.2.4.19	Retransmission
This parameter, when present, indicates that information from retransmitted Diameter ACRs has been used in this CDR.
5.1.2.4.20	SCEF ID
This field contains the Diameter Identity of the SCEF serving the PDN connection.  
5.1.2.4.21	Served IMSI
This field contains the International Mobile Subscriber Identity (IMSI) of the served party. The term "served" party is used to describe the mobile subscriber involved in the transaction recorded.
The structure of the IMSI is defined in TS 23.003 [200].
5.1.2.4.22	Served MSISDN
This field contains the Mobile Station (MS) ISDN number (MSISDN) of the served party. The term "served" party is used to describe the mobile subscriber involved in the transaction recorded. In case of multi-numbering the MSISDN stored in a CDR will be the primary MSISDN. 
The structure of the MSISDN is defined in TS 23.003 [200].
5.1.2.4.23	Serving Node Identity  
This field contains the Diameter Identity of the serving node (i.e. MME) connected during the record for the PDN connection to the SCEF.  

5.1.2.4.24	Serving Node PLMN Identifier
This field contains the PLMN Identifier (Mobile Country Code and Mobile Network Code) serving the UE. 
5.1.2.4.25	Serving PLMN Rate Control  
This field contains the Serving PLMN Rate Control as specified in TS 29.128 [244], which is used during the record for the PDN connection to the SCEF. 
5.1.2.5	Exposure Function API CDR parameters
5.1.2.5.1	Introduction
This clause contains the description of each field of the Exposure Function API CDRs specified in TS 32.254 [14].
5.1.2.5.2	API Content
This field holds the API content (e.g. location, Monitoring Type) used in the T8 transaction for the API invocation request, if available.
5.1.2.5.3	API Direction
This field holds the direction to indicate the API invocation or API notification.
5.1.2.5.4	API Identifier
This field holds the identity of API for each API invocation.
5.1.2.5.5	API Invocation Timestamp 
This field holds the time stamp when the API invocation request is submitted to the SCEF.
5.1.2.5.6	API Network Service Node
This field holds the identifier of the network element as defined in TS 23.682[243] that triggers the API notification.
5.1.2.5.7	API Result Code
This field holds the result of API Invocation.
5.1.2.5.8	API Size
This field holds the size of API payload.
5.1.2.5.9	Event Timestamp
This field holds the time stamp of the event reported for the generation of charging information from the SCEF, for the northbound exposure function API.
5.1.2.5.10	External Identifier
This field holds the external Identifier identifying the served party associated to the IMSI or MSISDN or External Group ID, if available.
5.1.2.5.11	Local Record Sequence Number
Consecutive record number created by this node. The number is allocated sequentially including all CDR types.
5.1.2.5.12	Node Id
Name of the recording entity.
5.1.2.5.13	Record Extensions
A set of network operator/manufacturer specific extensions to the record. Conditioned upon the existence of an extension.
5.1.2.5.14	Record Type 
SCEF exposure function API record.
5.1.2.5.15	Retransmission
This parameter, when present, indicates that information from retransmitted Diameter ACRs has been used in this CDR.
5.1.2.5.16	SCEF Address
This parameter holds the IP address of SCEF.
5.1.2.5.17	SCEF ID
This parameter holds the Diameter identity of the SCEF used for this API invocation.
5.1.2.5.18	SCS AS Address
This field holds the IP address of SCS/AS
5.1.2.5.19	TLTRI
This field holds the T8 Long Term Transaction Reference ID.
5.1.2.5.20	Void

5.1.3	Subsystem level CDR parameters
5.1.3.0	General
This subclause contains the description of the CDR parameters that are specific to the subsystem level CDR types. 
This comprises the CDR types from the CN IM subsystem (TS 32.260 [20]).
5.1.3.1	IMS CDR parameters
5.1.3.1.0	Introduction
This clause contains the description of each field of the IMS CDRs specified in TS 32.260 [20].
5.1.3.1.1	Access Correlation ID
This field holds the charging identifier of the access network. 
It includes the following fields:
-	GPRS Charging ID defined in clause 5.1.3.1.18
-	Access Network Charging Identifier: Includes the charging ID for other access networks.
5.1.3.1.2	Access Network Information
Holds the content of one of the SIP P-header "P-Access-Network-Info". In SIP, as per RFC 7315 [404], the content of the "P-Access-Network-Info" header is known as the access-net-spec. When multiple access-net-spec values are transported in a single P-Access-Network-Info header in comma-separated format, then only one access-net-spec value is included.
For access types and access classes associated to 3GPP accesses:
-	For GERAN access, the cgi-3gpp field contains the CGI;
-	For UTRAN access, the utran-cell-id-3gpp field contains the LAI and CI, and the utran-sai-3gpp field contains the SAI;
-	For E-UTRAN access, the utran-cell-id-3gpp field contains the TAI and ECGI;
-	For NR access, the utran-cell-id-3gpp field contains the TAI and NCI.   
The SIP "P-Access-Network-Info" header syntax is specified in TS 24.229 [210] clause 7.2A.4. 
For access types and access classes associated to trusted WLAN access: the i-wlan-node-id field contains the BSSID, and when available, the operator-specific-GI field contains the Geographical Identifier.  
For access types and access classes associated to untrusted WLAN access, the i-wlan-node-id field contains the BSSID, and UE local IP address, ePDG IP Address, and TCP source port, UDP source port are contained in corresponding dedicated fields.
5.1.3.1.2aA	Access Transfer Type
This field indicates the type of access transfer performed for IMS service continuity, for instance PS-to-PS in case of SRVCC.
5.1.3.1.2A 	Additional Access Network Information
Holds the content of an additional  SIP P-header "P-Access-Network-Info" when it is available. In SIP, as per RFC 7315 [404], the content of the "P-Access-Network-Info" header is known as the access-net-spec. When multiple access-net-spec values are transported in a single P-Access-Network-Info header in comma-separated format, then only one access-net-spec value is included.
5.1.3.1.3	Alternate Charged Party Address
Holds the address of an alternate charged party determined by an AS at IMS session initiation.
5.1.3.1.3A	AoC Information
AoC information is the AoC related Charging information transferred to the CDF, as defined in TS 32.280 [21]. 
5.1.3.1.4	Application Provided Called Parties
Holds a list of the Called party address(es), if the address(es) are determined by an AS (SIP URL, E.164…).
5.1.3.1.5	Application Servers Information
This is a grouped CDR field containing the fields: "Application Server Involved", "Application Provided Called Parties" and “Status”. 
5.1.3.1.6	Application Servers involved
Holds the ASs (if any) identified by the SIP URLs.
5.1.3.1.7	Void
5.1.3.1.8	Bearer Service
Holds the used bearer service for the PSTN leg.
5.1.3.1.9	Called Party Address
In the context of an end-to-end SIP transaction (except for SIP REGISTER and SIP SUBSCRIBE transactions) this field holds the address of the party (Public User ID or Public Service ID) to whom the SIP transaction is posted. The Called Party Address shall be populated with the SIP URI (according to RFC3261 [401]) or Tel URI (according to RFC3966 [402]) contained in the outgoing Request-URI of the request (e.g. after ENUM query or after AS interaction). Called Party Address could also be populated with an URN (according to RFC5031 [407]) for an emergency SIP session.
For a registration procedure this field holds the party (Public User ID) to be registered. In this case, the Called Party Address field is obtained from the "To" SIP header of the SIP request. For a subscription procedure this field holds the address of the resource for which the originator wants to receive notifications of change of states. In this case, the Called Party Address field is obtained from the outgoing Request-URI of the SIP request.
5.1.3.1.10	Carrier Select Routing
This item holds information on carrier select routing, received by S-CSCF during ENUM/DNS processes. 
The parameter corresponds to the CarrierSelectRoutingInformation AVP.
5.1.3.1.11	Cause for Record Closing
This field contains a reason for the release of the CDR including the following:
    • normal release: end of session;
    • partial record generation: time (duration) limit, maximum number of changes in charging conditions (e.g. maximum number in 'List of Message Bodies' exceeded) or service change (e.g. change in media components, Access Transfer);
    • abnormal termination;
    • management intervention (request due to O&M reasons).
    • CCF initiated record closure;
A more detailed reason may be found in the Service Reason Return Code field.
5.1.3.1.11A 	Cellular Network Information
Holds the content of one SIP header "Cellular-Network-Info". As per TS 24.299 [210], a User Agent (UA) supporting one or more cellular radio access technology (e.g. E-UTRAN) but using a non-cellular IP-CAN to access the IM CN subsystem can use this header field to relay information to its service provider about the radio cell identity of the cellular radio access network on which the UE most recently camped. 
5.1.3.1.12	Content Disposition
This sub-field of Message Bodies holds the content disposition of the message body inside the SIP signalling, Content-disposition header field equal to "render", indicates that "the body part should be displayed or otherwise rendered to the user". Content disposition values are: session, render, inline, icon, alert, attachment, etc.
5.1.3.1.13	Content Length
This sub-field of Message Bodies holds the size of the data of a message body in bytes.
5.1.3.1.14	Content Type 
This sub-field of Message Bodies holds the MIME type of the message body, Examples are: application/zip, image/gif, audio/mpeg, etc. 
5.1.3.1.15	Event
The Event parameter holds the content of the "Event" header defined in RFC 3265 [403],
5.1.3.1.16	Expires
The Expires parameter holds the content of the "Expires" header.
5.1.3.1.16aA	FE Identifier List
This parameter holds the FE Identifier List of the P-Charging-Vector header, as received in the FE-Identifier-List AVP as defined in TS 32.299 [50].
5.1.3.1.16A	From Address
This field holds the information from the SIP From Header.
5.1.3.1.17	GGSN Address
This parameter holds the control plane IP address of the GGSN, PGW or SMF that handles one or more media component(s) of a IMS session. If GPRS is used to access the IMS, the GGSN address is used together with the GPRS charging ID as the access part of the charging correlation vector. The charging correlation vector is comprised of an access part and an IMS part, which is the IMS Charging Identifier. For further information regarding the composition of the charging correlation vector refer to the appropriate clause in TS 32.240 [1]. 

5.1.3.1.18	GPRS Charging ID
This parameter holds the charging identifier of GPRS, EPS and 5GS access network:
-	 GPRS charging ID (GCID) which is generated by the GGSN for a GPRS PDP context. There is a 1:1 relationship between the GCID and the PDP context. If GPRS is used to access the IMS, the GCID is used together with the GGSN address as the access part of the charging correlation vector that is comprised of an access part and an IMS part, which is the IMS Charging Identifier.
-	Charging Id which is generated by the PGW for a bearer, as specified in TS 32.251 [11].
-	Charging Id which is generated by the SMF for a PDU session, as specified in TS 32.255 [15].
For further information regarding the composition of the charging correlation vector refer to the appropriate clause in TS 32.240 [1].
5.1.3.1.18A	Void
5.1.3.1.19	IMS Charging Identifier
This parameter holds the IMS charging identifier (ICID) as generated by the IMS node for the SIP session/transaction. The value of the ICID parameter is identical with the 'icid-value' parameter defined in TS 24.229 [210]. The 'icid-value' is a mandatory part of the P-Charging-Vector and coded as a text-based UTF-8 charset (as are all SIP messages). For further information regarding the composition and usage of the P-Charging-Vector refer to TS 32.260 [20], TS 24.229 [210] and RFC 7315 [404].
The ICID value is globally unique across all 3GPP IMS networks for a time period of at least one month, implying that neither the node that generated this ICID nor any other IMS node reuse this value before the uniqueness period expires.  The one month minimum uniqueness period counts from the time of release of the ICID, i.e. the ICID value no longer being used. This can be achieved by using node specific information, e.g. high-granularity time information and/or topology/location information.  The exact method how to achieve the uniqueness requirement is an implementation issue.
At each SIP session unrelated method, both initial and subsequent (e.g., REGISTER, NOTIFY, MESSAGE etc.), a new, session unrelated ICID is generated at the first IMS network element that processes the method. This ICID value is contained in the SIP request and SIP response of that SIP transaction and shall be valid for the duration of the transaction.
At each SIP session establishment a new session specific ICID is generated at the first IMS network element that processes the session-initiating SIP INVITE message. This ICID is then used in all subsequent SIP messages for that session (e.g., SIP 200 OK, SIP (RE-)INVITE, SIP BYE etc.) until the session is terminated. 
5.1.3.1.20	IMS Communication Service Identifier
This parameter holds the IMS Communication Service Identifier (ICSI) as contained in the P-Asserted-Service header of a SIP request to identify an IMS Communication Service as defined in TS 24.229 [210]. 
5.1.3.1.20A	IMS Emergency Indicator 
This field indicates the IMS session or registration is an IMS emergency session or emergency registration. This field is missing if IMS session/registration is not detected as an IMS emergency session/registration.  
5.1.3.1.20B	IMS Visited Network Identifier
Holds the SIP P-header "P-Visited-Network-ID". with the value according to 3GPP TS 24.229 [210].
-	For the roaming architecture for voice over IMS with local breakout, the value of IMS visited network identifier is a pre-provisioned string that identifies the network of the P-CSCF at the home network.
-	For the roaming architecture for voice over IMS with home routed traffic, IMS visited network identifier is a string that identifies the visited network of the UE including an indication that the P-CSCF is located in the home network.

5.1.3.1.21	Incomplete CDR Indication
This field provides additional diagnostics when the CCF detects missing ACRs.
5.1.3.1.21A	Initial IMS Charging Identifier
This parameter holds the Initial IMS charging identifier (ICID) as generated by the IMS node for the initial SIP session created for IMS service continuity. 
5.1.3.1.21Aa	Instance Id
An Instance Id is defined as a URN generated by the device that uniquely identifies a specific device amongst all other devices. The Instance Id is transported in the sip.instance feature tag in the Contact header of a SIP request associated with the served user. 
5.1.3.1.21Aaa	Inter-UE Transfer
This field indicates that Inter-UE transfer has been performed for IMS service continuity and present only in that case.
5.1.3.1.21B	IP Realm Default Indication
This field indicates whether the IP realm used for the SDP media component is the Default IP realm or not.
5.1.3.1.21C	ISUP Cause
When session is released via ISUP, this field indicates the reason the call was released.
5.1.3.1.21Ca 	List of Access Network Info Change 
This group field may occur several times in the CDR and each occurrence holds information on subsequent changes in one or two SIP P-header(s) "P-Access-Network-Info" together with the time the location was acquired. 
Each element of the list may include the following fields:
-	Access Network Information; 
-	Additional Access Network Information;
- 	Access ChangeTime. 
5.1.3.1.21D 	List of Access Transfer Information
This grouped field may occur several times in the CDR and each occurrence holds information on a particular access transfer. The field is present only if access transfer procedure has been performed for IMS service continuity.
Each element of the list represents an access transfer and may include the following fields:
-	Access Transfer Type;
-	Inter-UE Transfer;
-	Access Network Information; 
-	Additional Access Network Information;
-	Subscriber Equipment Number;
-	Instance Id;
- 	Related IMS Charging Identifier;
- 	Related IMS Charging Identifier Generation Node;
- 	Access Transfer Time. 
5.1.3.1.22	List of Associated URI
The list of non-barred public user identities (SIP URIs and/or Tel URIs) associated to the public user identity under registration. The list of identities is obtained from the P-Associated-URI header of a SIP 200 OK response to a SIP REGISTER request.
5.1.3.1.23	List of Called Asserted Identity 
This field holds the address or addresses (SIP URI and/or Tel URI according to RFC 3261 [401] and RFC 3966 [402] respectively) of the party (Public User ID or Public Service ID) of the finally asserted called party.
These address/addresses are obtained from the P-Asserted-Identity SIP header field of the 2xx responses corresponding to a SIP request either initiating a dialog or a standalone transaction.
This field shall be present when the P-Asserted-Identity SIP header field is available in the SIP 2xx response. In case no P-Asserted-Identity is known, this list shall include one item (of type SIP URI) with the value "unknown".
5.1.3.1.23A	List of Called Identity Changes
This field holds the set of terminating identity address changes after IMS session establishment and the associated time stamp for each.
These addresses are obtained from the From SIP header field of a SIP UPDATE request or SIP RE-INVITE request.
5.1.3.1.24	List of Calling Party Address
The address or addresses (Public User ID or Public Service ID) of the party requesting a service or initiating a session. This field may hold the SIP URI (according to RFC 3261 [401]), the Tel URI (according to RFC 3966 402]) or both the SIP URI and the Tel URI of the calling party. The address is obtained from the P-Asserted-Identity header of a non-REGISTER SIP request, either initiating a dialog or a standalone transaction.
5.1.3.1.25	List of Early SDP Media Components
This is a grouped field which may occur several times in one CDR.  This field describes session, media parameters and timestamps related to media components set to active according to SDP signalling exchanged during a SIP session establishment and before the final successful or unsuccessful SIP ANSWER to the initial SIP INVITE message is received. Once a media component has been set to active, subsequent status changes shall also be registered.
This field applies only to SIP session related cases, but it may be present both in event CDRs (unsuccessful session establishment) and session CDRs (successful session establishment).
The List of Early SDP Media Components contains the following elements:
    • SDP Offer Timestamp;
    • SDP Answer Timestamp;
    • SDP Media Components;
    • Media Initiator flag;
    • SDP Session Description.
These fields are described in the appropriate subclause. 
5.1.3.1.26	List of Inter Operator Identifiers
This list holds the identification of the pair of originating network and terminating network if exchanged via SIP signalling, as recorded in the Inter Operator Identifier (IOI) AVP as described in TS 32.299 [50].  It may occur several times in one CDR. For further information on the IOI exchange via SIP signalling please refer to TS 24.229 [210].
5.1.3.1.27	List of Message Bodies
This grouped field comprising several sub-fields describing the data that may be conveyed end-to-end in the body of a SIP MESSAGE.  Since several message bodies may be exchanged via SIP-signalling, this grouped field may occur several times.
The List of Message Bodies contains the following elements: 
    • Content Type;
    • Content Disposition;
    • Content Length;
    • Originator.
They are described in the appropriate subclause.  Message bodies with the "Content-Type" field set to application/sdp and the "Content-Disposition" field set to session are not included in the "Message Bodies" field.
5.1.3.1.27A	List of NNI Information
This grouped field comprising several sub-fields holds information about the NNI used for interconnection and roaming. This field may occur more than once in a CDR if more NNI are involved e.g. when support of transit routing is collocated with the IBCF. 
The List of NNI Information contains the following elements:
-	Session Direction;
-	NNI Type;
-	Relationship Mode; 
-	Neighbour Node Address.
These field elements are described in the appropriate subclause.
5.1.3.1.28	List of SDP Media Components
This is a grouped field which may occur several times in one CDR and the content should be filled as described in TS 32.260 [20] clause 5.1.3. 
The field is present only in a SIP session related case.
The List of SDP Media Components contains the following elements:
-	SIP Request Timestamp;
-	SIP Response Timestamp;
-	SDP Media Components;
-	Media Initiator flag; 
-	SDP Session Description.
-	Media Initiator Party.
The Media Initiator Party is only used for PoC charging.
These field elements are described in the appropriate subclause.
5.1.3.1.28A	List of Reason Header
This parameter contains the content of the Reason-header in the SIP BYE and SIP CANCEL, and may contain multiple entries if there are multiple Reason-headers within a SIP BYE or SIP CANCEL
5.1.3.1.28B	Local GW Inserted Indication
This field indicates if the local GW (TrGW, IMS-AGW) is inserted or not for the SDP media component.
5.1.3.1.29	Local Record Sequence Number
This field includes a unique record number created by this node. The number is allocated sequentially for each partial CDR (or whole CDR) including all CDR types. The number is unique within the CCF.
The field can be used e.g. to identify missing records in post processing system.
5.1.3.1.30	Media Initiator Flag
This field indicates if the called party has requested the session modification and it is present only if the initiator was the called party.
5.1.3.1.31	Media Initiator Party
This field indicates initiating party who has requested the session modification in PoC charging.
5.1.3.1.31a	MS Time Zone
This field contains the 'Time Zone' IE provided as part of the NetLoc enhancement for an ICS user as specified in TS 23.292 [229].
5.1.3.1.31aA	MSC Address
This field contains the Recommendation E.164 [308] number assigned to the MSC that produced the record. For further details concerning the structure of MSC numbers see TS 23.003 [200].
5.1.3.1.31A	Neighbour Node Address
This field holds the control plane IP address of the neighbouring network contact point that handles the service request in case of interconnection and roaming.
5.1.3.1.31B	NNI Type
This field indicates whether the type of used NNI is non-roaming, roaming with loopback routing, or roaming without loopback routing. The loopback indication is either sent by the S-CSCF in forward direction within the initial SIP request or sent by TRF in backward direction and received by the ATCF, AS and P-CSCF in the final SIP response.  
5.1.3.1.31C	Void
5.1.3.1.32	Node Address
This item holds the address of the node providing the information for the CDR. This may either be the IP address or the FQDN of the IMS node generating the accounting data. This parameter corresponds to the Origin-Host AVP.
5.1.3.1.33	Number Portability Routing
This item holds information on number portability routing, received by S-CSCF during ENUM/DNS processes. 
The parameter corresponds to the NumberPortabilityRoutingInformation AVP.
5.1.3.1.33A	Void
5.1.3.1.34	Online Charging Flag
This field indicates the Online Charging Request was sent based on the provided ECF address from the SIP P-header "P-Charging-Function-Addresses". The parameter corresponds to the Online-Charging-Flag AVP.
NOTE: No proof that online charging action has been taken
5.1.3.1.35	Originator
This sub-field of the "List of Message Bodies" indicates the originating party of the message body.
5.1.3.1.35A	Outgoing Session ID
For a SIP session the Session-ID contains the SIP CALL ID as defined in the Session Initiation Protocol RFC 3261 [401]. When the AS acts as B2BUA, the outgoing session is identified by the Outgoing Session ID which contains the SIP CALL ID.
5.1.3.1.36	Private User ID
Holds the used Network Access Identifier of the served party according to RFC 2486 [405]. This parameter corresponds to the User-Name AVP.
5.1.3.1.37	Real Time Tariff Information
This is a field containing the real time tariff information that may be exchanged in the SIP transaction, encoded in a XML body as described in the TS 29.658 [225]. The RTTI information may be captured in the charging information and it is operator configurable as whether it is used in its original XML format or mapped on a detailed structure of parameters. The RTTI information XML schema in XML format is given in the TS 29.658 [225]. The Tariff Information structure of parameters is provided in the TS 32.280 [40].
The Real Time Tariff Information contains one of the following elements:
    • Tariff XML;
    • Tariff Information.
These field elements are described in the appropriate subclause.
5.1.3.1.38	Record Closure Time
A Time stamp reflecting the time the CCF closed the record.
5.1.3.1.39	Record Extensions
A set of operator/manufacturer specific extensions to the record, conditioned upon existence of an extension.
5.1.3.1.40	Record Opening Time
A time stamp reflecting the time the CCF opened this record. Present only in SIP session related case.
5.1.3.1.41	Record Sequence Number
This field contains a running sequence number employed to link the partial records generated by the CCF for a particular session (characterised with the same Charging ID and GGSN address pair). The Record Sequence Number is not present if the record is the only one produced in the CCF for a session. The Record Sequence Number starts from one (1).
5.1.3.1.42	Record Type
Identifies the type of record. The parameter is derived from the  Node-Functionality AVP, defined in TS 32.299 [40].
5.1.3.1.42A	Related IMS Charging Identifier
This field holds the Related IMS Charging Identifier when the session is the target access leg in an SRVCC handover. The Related IMS Charging Identifier contains the IMS charging identifier generated for the source access leg.
5.1.3.1.42B	Related IMS Charging Identifier Generation Node
This field holds the identifier of the node that generated the Related IMS charging identifier.
5.1.3.1.42A	Relationship Mode
This field indicates whether the other functional entity (e.g. contact point of the neighbouring network) is regarded as part of the same trust domain.
5.1.3.1.43	Requested Party Address 
This field holds the address of the party (Public User ID or Public Service ID) to whom the SIP transaction was originally posted. The Requested Party Address shall be populated with the SIP URI or Tel URI (according to RFC 3261 [401] and RFC 3966 [402] respectively) contained in the incoming Request-URI of the request. Requested Party Address could also be populated with an URN (according to RFC5031 [407]) for an emergency SIP session.
This field is only present if different from the Called Party Address parameter.
5.1.3.1.44	Retransmission
This parameter, when present, indicates that information from retransmitted Diameter ACRs has been used in this CDR.
5.1.3.1.45	Role of Node
The field indicates whether the IMS node (except MRFC) is serving the Originating or the Terminating party. The role can be:
-	Originating (IMS node serving the calling party);
-	Terminating (IMS node serving the called party).
5.1.3.1.45A	Route header received
This field contains the information in the topmost route header in a received initial SIP INVITE and non-session related SIP MESSAGE request.
5.1.3.1.45B	Route header transmitted
This field contains the information in the route header representing the destination in a transmitted initial SIP INVITE and non-session SIP MESSAGE request.
5.1.3.1.46	SDP Answer Timestamp
This parameter contains the time of the response to the SDP Offer.
5.1.3.1.47	SDP Media Components
This is a grouped field comprising several sub-fields associated with one media component.  Since several media components may exist for a session in parallel these sub-fields may occur several times (as much times as media are involved in the session). The sub-fields are present if medium (media) is (are) available in the SDP data which is provided in the ACR received from the IMS node.
The SDP media component contains the following elements: 
-	SDP media name;
-	SDP media description;
-	Access Correlation ID;
-	Local GW Inserted indication;
-	IP Realm Default indication;
-	Transcoder Inserted indication.
These field elements are described in the appropriate subclause.
5.1.3.1.48	SDP Media Description:
This field holds the attributes of the media as available in the SDP data tagged with "i=", "c=","b=","k=", "a=". Only the attribute lines relevant for charging are recorded. To be recorded "SDP lines" shall be recorded in separate "SDP Media Description" fields, thus multiple occurrence of this field is possible. Always complete "SDP lines" are recorded per field.
This field corresponds to the SDP-Media-Description AVP.
Example: "c=IN IP4 134.134.157.81"
For further information on SDP please refer to RFC4566 [406].
Note: session unrelated procedures typically do not contain SDP data.
5.1.3.1.49	SDP Media Name 
This field holds the name of the media as available in the SDP data tagged with "m=". Always the complete "SDP line" is recorded.
This field corresponds to the SDP-Media-Name AVP.
Example: "m=video 51372 RTP/AVP 31"
For further information on SDP please refer to RFC 4566 [406].
5.1.3.1.50	SDP Offer Timestamp
This parameter contains the time of the SDP Offer.
5.1.3.1.51	SDP Session Description
Holds the Session portion of the SDP data exchanged between the User Agents if available in the SIP transaction.
This field holds the attributes of the media as available in the session related part of the SDP data tagged with "c=" and "a=" (multiple occurrence possible). Only attribute lines relevant for charging are recorded.
The content of this field corresponds to the SDP-Session-Description AVP of the ACR message.
Note: session unrelated procedures typically do not contain SDP data.
5.1.3.1.52	SDP Type
This field identifies if the SDP media component was an SDP offer or an SDP answer.
5.1.3.1.53	Served Party IP Address
This field contains the IP address of either the calling or called party, depending on whether the P-CSCF is in touch with the calling or called network. 
5.1.3.1.54	Service Delivery End Time Stamp
This field records the time at which the service delivery was terminated. It is Present only in SIP session related case.
The content of this field corresponds to the SIP-Request-Timestamp AVP of a received ACR[Stop] message indicating a session termination.
5.1.3.1.54A	Service Delivery End Time Stamp Fraction
This parameter contains the milliseconds fraction in relation to Service Delivery End Time Stamp.
5.1.3.1.55	Service Delivery Start Time Stamp
This field holds the time stamp reflecting either:
-	a successful session set-up: this field holds the start time of a service delivery (session related service)
-	a delivery of a session unrelated service: the service delivery time stamp
-	an unsuccessful session set-up and an unsuccessful session unrelated request: this field holds the time the network entity forwards the unsuccessful indication (SIP RESPONSE with error codes 3xx, 4xx, 5xx) towards the requesting User direction.
The content of this field corresponds to the SIP-Response-Timestamp AVP.
For partial CDRs this field remains unchanged.
5.1.3.1.55A	Service Delivery Start Time Stamp Fraction
This parameter contains the milliseconds fraction in relation to Service Delivery Start Time Stamp.
5.1.3.1.56	Service ID
This field identifies the service the MRFC is hosting. For conferences the conference ID is used here.
5.1.3.1.57	Service Reason Return Code
Provides the returned cause code for the service request (both successful and failure). This parameter corresponds to the Cause-Code AVP.
5.1.3.1.58	Service Request Timestamp
This field contains the time stamp which indicates the time at which the service was requested (SIP Request" message) and is present for session related and session unrelated procedures. The content of this item is derived from the SIP-Request-Timestamp AVP. If the SIP-Request-Timestamp AVP is not supplied by the network entity this field is not present.
For partial CDRs this field remains unchanged.
This field is present for unsuccessful service requests if the ACR message includes the SIP-Request-Timestamp AVP.
5.1.3.1.58A	Service Request Timestamp Fraction
This parameter contains the milliseconds fraction in relation to Service Request Timestamp.
5.1.3.1.58B	Session Direction
This field indicates whether the NNI is used for an inbound or outbound service request on the control plane in case of interconnection and roaming.
5.1.3.1.59	Session ID
The Session identification. For a SIP session the Session-ID contains the SIP CALL ID as defined in the Session Initiation Protocol RFC 3261 [401]. When the AS acts as B2BUA, the incoming Session-ID leg is covered.
5.1.3.1.60	Session Priority
This field contains the priority level of the session. The value of the parameter is derived from Resource-Priority header field and the rules for the translation depend on operator policy described in TS 24.229[210].  
5.1.3.1.61	SIP Method
Specifies the SIP-method for which the CDR is generated. Only available in session unrelated cases.
5.1.3.1.62	SIP Request Timestamp
This parameter contains the time of the SIP request (usually a (Re)Invite).
5.1.3.1.63	SIP Request Timestamp Fraction
This parameter contains the milliseconds fraction in relation to the SIP Request Timestamp.
5.1.3.1.64	SIP Response Timestamp
This parameter contains the time of the response to the SIP request. If an SDP is exchanged via SIP messages, then this parameter contains appropriately the time of SIP 200 OK acknowledging an SIP INVITE or of SIP ACK including a SDP ANSWER.
5.1.3.1.65	SIP Response Timestamp Fraction
This parameter contains the milliseconds fraction in relation to the SIP Response Timestamp.
5.1.3.1.66	S-CSCF Information
This field contains Information related to the serving CSCF, e.g. the S-CSCF capabilities upon registration event or the S-CSCF address upon the session establishment event. This field is derived from the Server-Capabilities AVP if present in the ACR received from the I-CSCF.
5.1.3.1.66A	Status
Holds the abnormal status information of specific ASs (if any) when AS(s) respond 4xx/5xx or time out to S-CSCF during an IMS session.
5.1.3.1.66B	TAD Identifier
This field indicates the type of access network (CS or PS) through which the session shall be terminated.
5.1.3.1.67	Tariff Information
This field holds the tariff mapped in the Tariff Information structure. The corresponding structure of the Tariff Information can be found in the TS 32.299 [50]. The formatting from real time tariff information to Tariff Information structure is described in TS 32 280 [40].
5.1.3.1.68	Tariff XML
This field holds the tariff formatted in the XML schema as specified in the TS 29.658 [225]. 
5.1.3.1.68A	Transcoder Inserted Indication
This field indicates if a transcoder is inserted or not for the SDP media component.
5.1.3.1.68B	Transit IOI List
This parameter holds the Transit-IOI List of the P-Charging-Vector header, as recorded in the Transit-IOI-List AVP as defined in TS 32.299 [50]. Multiple occurrences of this field, shall be in chronological order, i.e. the value in the SIP request is listed first. If only a value for the SIP response is available, the Transit IOI List for the SIP request shall be included with the value "unknown". For further information on the Transit IOI exchange via SIP signalling please refer to TS 24.229 [210].
5.1.3.1.69	Trunk Group ID Incoming/Outgoing
Contains the outgoing trunk group ID for an outgoing session/call or the incoming trunk group ID for an incoming session/call.
5.1.3.1.69A	User Location Information
This field contains the User Location Information using PCC mechanisms as specified in TS 23.203 [203] and TS 23.503 [246] or the location retrieval via Sh interface by AS as specified in TS 29.328 [242].
5.1.3.1.70	VLR Number
This field contains the Recommendation E.164 [308] number assigned to the VLR that produced the record. For further details concerning the structure of VLR numbers see TS 23.003 [200].
5.1.4	Service level CDR parameters
5.1.4.1	MMS CDR parameters
5.1.4.1.0	Introduction
This clause contains the description of each field of the MMS CDRs specified in TS 32.270 [30].
5.1.4.1.1	3GPP MMS Version
The MMS version of the originator MMS Relay/Server as defined in TS 23.140 [206].
5.1.4.1.2	Access Correlation
If the parameter is provided and is not an empty string, it is a unique identifier delivered by the used access network domain of the originator or recipient MMS User Agent. It may be used for correlation of the MMS CDRs with the corresponding MSC server CDRs in CS domain or GSN CDRs in PS domain. It is an empty string if the parameter is not delivered by the access network.
5.1.4.1.3	Acknowledgement Request
This Boolean value indicates whether (value TRUE) or not (value FALSE) a response has been requested in a request at the MM4 reference point.
5.1.4.1.4	Attributes List
This field contains a list of information element names that are used in the MM1_mmbox_view.REQ, which request corresponding information elements from the MMs to be conveyed in the MM1_mmbox_view.RES.  The list of known information element names are those currently defined for the MM1_retrieve.RES and MM1_notification.REQ.  In the absence of the Attributes list information element, the MMS Relay/Server shall, by default and if available, select these information elements from each viewed MM: Message ID, Date and time, Sender address, Subject, Message size, MM State, and MM Flags. 
5.1.4.1.5	Billing Information
This field contains transparent charging information provided by the MSCF to the MMS R/S for use by the billing system to properly bill the user for the service being supplied as defined in TS 29.140 [218]. Only the format, but not the content of the "Billing information" field is defined. 
5.1.4.1.6	Charge Information
This field consists of two parts, the charged party and the charge type. 
The Charged Party is an indication on which party is expected to be charged for an MM e.g. the sending, receiving, both parties or neither. This indicator is only applicable to MM7 CDRs (for VASP-originated MMs). It may be provided by the VASP when submitting an MM. 
The Charge Type indicates the type of subscription (i.e. postpaid or prepaid). This indicator is derived from the subscription parameters and only applicable to MM1 CDRs.
The Charged Parties are as follows:
-	Sender: This indicates the sending party is expected to be charged ('normal' charging model);
-	Recipient: This indicates the receiving party is expected to be charged ('reverse' charging model). This model implies there is a commercial agreement between the Recipient and the VASP;
-	Both: This indicates both the sending and the receiving parties are expected to be charged ('shared' charging     model);
-	Neither: This indicates neither the sending nor the receiving parties are expected to be charged ('free of charge' charging model).
The Charge types are as follows:
-	Postpaid;
-	Prepaid.
5.1.4.1.7	Content Type
The Content Type of the MM as defined in TS 23.140 [206].
5.1.4.1.8	Delivery Report Requested
This is an indication of type Boolean whether (value TRUE) or not (value FALSE) the originator/forwarding MMS User Agent has requested a delivery report in the MM1_submit.REQ/MM1_forward.REQ.
5.1.4.1.9	Duration of Transmission
This field contains the relevant time in seconds. The Duration of Transmission is the time from the beginning to the end of the MM transfer between the MMS User Agent and the MMS Relay/Server; e.g. for streaming purposes. 
Note that the CDRs purposely do not contain any information about the duration of storage on the MMS Relay/Server. If such information is required it can be calculated by post-processing systems from the CDR timestamps. For instance, the total duration of storage on the originator MMS Relay/Server could be calculated by taking the difference between the 'Record Time Stamp' of the O1S-CDR and the 'Record Time Stamp' of the OMD-CDR.
5.1.4.1.10	Earliest Time of Delivery
This field contains either the earliest time to deliver message or the number of seconds to wait before delivering the message.
5.1.4.1.11	Forward Counter
A Counter indicating the number of times the particular MM was forwarded as defined in TS 23.140 [206].
5.1.4.1.12	Forwarding Address
This field contains a forwarding MMS User Agent address. The MMS supports the use of E-Mail addresses (RFC 822 [400]), MSISDN (E.164[308]) or IP addresses.
5.1.4.1.13	Forwarding MMS Relay/Server Address
This field contains one or more addresses of the forwarding MMS Relay/Server. The address is either an IP address or a domain name.
5.1.4.1.14	Limit
This field contains a number that may be provided in the MM1_mmbox_view.REQ to specify a limit for the number of MMs the information elements to which shall be returned in the MM1_mmbox_view.RES. 
5.1.4.1.15	Linked ID
This field identifies a correspondence to a previous valid message delivered to the VASP 
5.1.4.1.16	Local Record Sequence Number
This field includes a unique record number created by this node. The number is allocated sequentially including all CDR types. The number is unique within one node, which is identified either by field Node ID or by record-dependent MMS Relay/Server.
The field can be used e.g. to identify missing records in post processing system.
5.1.4.1.17	Managing Address
This field contains the managing MMS User Agent address i.e. the MMS User Agent that sends and receives transactions related to the MMBox management . The MMS supports the use of E-Mail addresses (RFC 822) [400], MSISDN (E.164[308]) or IP address.
5.1.4.1.18	Message Class
A class of messages such as personal, advertisement, information service etc. For more information see TS 23.140 [206]. 
5.1.4.1.19	Message Distribution Indicator
This is an indication of type Boolean whether (value TRUE) or not (value FALSE) the VASP has indicated the content of the MM is intended for redistribution.
5.1.4.1.20	Message ID
This field specifies the MM Message ID of the MM as defined in TS 23.140 [206]. The concrete syntax of this MM Message ID is given by the body of the field introduced by the string "X-Mms-Message-ID:" in the concrete syntax of the message MM4_Forward.REQ. All CDRs pertaining to the same MM shall employ the same value of this parameter, i.e. the value initially assigned by the originator MMS Relay/Server upon submission of the MM by the Originator MMS User Agent.
5.1.4.1.21	Message Reference
A reference as specified in TS 23.140 [206], e.g. URI, for the MM that can be used for retrieving the MM from the recipient MMS Relay/Server.
5.1.4.1.22	Message selection
Messages which are to be viewed may be selected by a list of Message References or by a selection based on MM State and/or MM Flags keywords.
5.1.4.1.23	Message Size
This field contains the number of octets of the MM that is calculated as specified in TS 23.140 [206].
5.1.4.1.24	MMBox Storage Information
This field includes following storage information elements for the MMBox containing the MM State, MM Flags, Store Status, Store Status Text and Stored Message Reference.
-	MM State;
This field contains the state of the MM.
-	MM Flags:
This field contains the keyword flags of the MM.
-	Store Status:
This field contains an appropriate status value of the stored MM, e.g. stored, error-transient-mailbox-full,…
-	Store Status Text;
This field includes a more detailed technical description of the store status at the point in time when the CDR is generated.
-	Stored Message Reference;
A reference of the newly stored MM.
5.1.4.1.25	MM component list
The MM component list is a set of subject and media components from type of media formats including the size of all elements in octets. For a complete description of media formats that may be supported by MMS, refer to IANA [xx].
5.1.4.1.26	MM Date and Time
The date and time field contains the time stamp relevant for the handling of the MM by the recipient MMS Relay/ Server (read, deleted without being read, etc.). The time-stamp includes at a minimum: date, hour, minute and second.
5.1.4.1.27	MM Listing
This field contains a list of information elements from the MMs returned within the MM1_mmbox_view.RES.  The listing shall consist of the following information elements, separately grouped for each MM returned in the list:
-	Message reference: a unique reference to an MM;
-	Information elements corresponding to those requested in the Message Selection information element on the MM1_mmbox_view.REQ.
5.1.4.1.28	MM Status Code
This field contains an appropriate status value of the delivered MM (e.g. retrieved, rejected, etc.).
5.1.4.1.28A	MS Time Zone
This field contains the 'Time Zone' IE provided for the MMS User Agent as specified in TS 29.060 [215].
5.1.4.1.29	MSCF Information
This is a grouped field comprising several the following sub-fields associated with the invocation of the MSCF for advanced addressing:
-	Billing Information;
-	Routeing address List.
These field elements are described in the appropriate subclause.
5.1.4.1.30	Originator Address
This field contains an originator MMS User Agent address. The MMS supports the use of E-Mail addresses (RFC 822 [400]) or MSISDN (E.164 [308]).
5.1.4.1.31	Originator MMS Relay/Server Address
This field contains an address of the originator MMS Relay/Server. This address is composed of a mandatory IP address and/or an optional domain name.
5.1.4.1.32	Priority
The priority (importance) of the message, see TS 23.140 [206].
5.1.4.1.33	Quotas
The quotas of the MMBox in messages and/or octets identified with Messages or Octets
5.1.4.1.34	Quotas requested
This is an indication that the Managing User Agent has requested the current message and/or size quotas.
5.1.4.1.35	Read Reply Requested
A Boolean value indicating whether the originator MMS User Agent has requested a read-reply report (value TRUE) or not (value FALSE).
5.1.4.1.36	Read Status
See TS 23.140 [206]: Status of the MM, e.g. Read, Deleted without being read.
5.1.4.1.37	Recipient Address
This field contains a recipient MMS User Agent address. The MMS supports the use of E-Mail addresses (RFC 822 [400]), MSISDN (E.164 [308]) or Service provider specific addresses (short code).
5.1.4.1.38	Recipient MMS Relay/Server Address
This field contains an address of the recipient MMS Relay/Server. This address is composed of a mandatory IP address and/or an optional domain name.
5.1.4.1.39	Recipients Address List
This field contains a list of recipient MMS User Agent addresses.
5.1.4.1.40	Record Extensions
The field enables network operators and/or manufacturers to add their own extensions to the standard record definitions.
5.1.4.1.41	Record Time Stamp
This field indicates the date and time when the CDR was produced.
5.1.4.1.42	Record Type
The field identifies the type of the record, see TS 32.250 [10].
5.1.4.1.43	Reply Charging
This field indicates whether the originator of the MM is willing to take over the charge for the sending of a reply-MM to their submitted MM from the recipient(s). In this case the originator MMS Relay/Server marks the MM as no charge (reply-charged).
In the Originator MM1 Submission CDR (O1S-CDR) this parameter indicates whether the originator MMS User Agent has requested reply-charging (value TRUE) or not (value FALSE).
In the Recipient MM1 Notification Request record (R1NRq -CDR) it indicates whether a reply to this particular original MM is free of charge (value TRUE) or not (value FALSE).
In the MM7 Submission CDR (7S-CDR) this parameter indicates whether the originator MMS VASP has requested reply-charging (value TRUE) or not (value FALSE).
5.1.4.1.44	Reply Charging ID
This field is present in the CDR only if the MM is a reply-MM to an original MM. The Reply Charging ID is the Message ID of the original MM.
5.1.4.1.45	Reply Charging Size
In the Originator MM1 Submission CDR (O1S-CDR), in case of reply-charging, this field indicates the maximum size for reply-MM(s) granted to the recipient(s) as specified by the originator MMS User Agent.
In the Recipient MM1 Notification Request CDR (R1NRq-CDR), in case of reply-charging, this field indicates the maximum size of a reply-MM granted to the recipient as specified in the MM1_notification.REQ.
In the MM7 Submission CDR (7S-CDR), in case of reply-charging, this field indicates the maximum size for reply-MM(s) granted to the recipient(s) as specified by the originator MMS VASP.
5.1.4.1.46	Reply Deadline
In the Originator MM1 Submission CDR (O1S-CDR), in case of reply-charging, this field indicates the latest time of submission of replies granted to the recipient(s) as specified by the originator MMS User Agent.
In the Recipient MM1 Notification Request CDR (R1NRq-CDR), in case of reply-charging, this field indicates the latest time of submission of a reply granted to the recipient as specified in the MM1_notification.REQ.
In the MM7 Submission CDR (7S-CDR), in case of reply-charging, this field indicates the latest time of submission of replies granted to the recipient(s) as specified by the originator MMS VASP.
5.1.4.1.47	Report allowed
A Boolean value indicating, if present whether sending of a delivery report is permitted (value TRUE) or not (value FALSE).
5.1.4.1.48	Request Status code
The status of the MM as reflected in the corresponding MM4 message (e.g. error service denied, error network problem, error unsupported message, etc.). For further details see TS 23.140 [206].
5.1.4.1.49	Routeing Address
The field contains a recipient address for routeing of a multimedia message. For a complete description of the routeing address, refer to TS 29.140 [218].
5.1.4.1.50	Routeing Address List
This field contains a list of routeing addresses.
5.1.4.1.51	Sender Address
The address of the MMS User Agent as used in the MM1_notification_REQ/MM1_retrieve.RES. This parameter is present in the CDR even if address hiding was requested, resulting in the sender address is not being included in the above messages. 
5.1.4.1.52	Sender Visibility
This Boolean value indicates whether the originator MMS User Agent has requested her address to be hidden from the recipient (value TRUE) or not (value FALSE).
5.1.4.1.53	Service code
This field contains charging information provided by the VASP to the MMS R/S for use by the billing system to properly bill the user for the service being supplied. The usage of the "service code" is, in the release, open to any usage envisioned by the operators, service providers or MMS Relay/Server vendors. In this release only the format, but not the content of the "service code" field is defined. 
5.1.4.1.54	Start
This field contains a number that may be used in the MM1_mmbox_view.REQ to index the first MM to be viewed, relative to the selected set of MMs, allowing partial views to be requested
5.1.4.1.55	Status Text
This field includes a more detailed technical status of the message at the point in time when the CDR is generated..
5.1.4.1.56	Submission Time
The submission time field contains the time stamps relevant for the submission of the MM. The time-stamp includes a minimum of date, hour, minute and second.
5.1.4.1.57	Time of Expiry
This field contains the desired date or the number of seconds to expiry of the MM, if specified by the originator MMS User Agent. 
5.1.4.1.58	Totals
The total number of messages and/or octets for the MMBox, identified with Messages or Octets.
5.1.4.1.59	Totals requested
This is an indication that the Managing User Agent has requested the current total number of messages and/or size contained by the MMBox.
5.1.4.1.60	Upload Time
The upload time field contains the time stamps relevant for the upload of the MM. The time-stamp includes a minimum of date, hour, minute and second.
5.1.4.1.61	VAS ID
This field specifies the identification of the  VASP as defined in TS 23.140 [206].
5.1.4.1.62	VASP ID
This field specifies the identification of the originating application as defined in TS 23.140 [206].
5.1.4.2	LCS CDR parameters
5.1.4.2.0	Introduction
This clause contains the description of each field of the LCS CDRs specified in TS 32.271 [31].
5.1.4.2.1	Home GMLC Identity
This field contains the IP address of the Home GMLC (H-GMLC) involved in the location request.
5.1.4.2.2	LCS Client Identity
This field contains further information on the LCS Client identity as defined in TS 29.002 [214].
5.1.4.2.3	LCS Client Type
This field contains the type of the LCS Client as defined in TS 29.002 [214].
5.1.4.2.4	LCS Priority
This parameter gives the priority of the location request as defined in TS 49.031 [227].
5.1.4.2.5	Location Estimate
The Location Estimate field is providing an estimate of a geographic location of a target MS according to TS 29.002 [214].
5.1.4.2.6	Location Type
This field contains the type of the location as defined in TS 29.002 [214].
5.1.4.2.7	Positioning Data
This information element is providing positioning data associated with a successful or unsuccessful location attempt for a target MS according TS 49.031 [227].
5.1.4.2.8	Provider Error
This parameter is used to indicate a protocol related type of error as defined in TS 29.002 [214].
5.1.4.2.9	Requesting GMLC Identity
This field contains the IP address of the Requesting GMLC (R-GMLC) involved in the location request.
5.1.4.2.10	Result code
This field indicates the result of the request or individual positioning as defined in OMA Mobile Location Protocol [311].
5.1.4.2.11	Target IMSI
This field contains the International Mobile Subscriber Identity (IMSI) of the targeted party. The term "targeted" party is used to describe the mobile subscriber involved in the transaction recorded e.g. the subscriber whose location is requested in case of mobile terminated location request.
The structure of the IMSI is defined in TS 23.003 [200].
5.1.4.2.12	Target MSISDN
This field contains the Mobile Station ISDN Number (MSISDN) of the targeted party. The term "targeted" party is used to describe the mobile subscriber involved in the transaction recorded e.g. the subscriber whose location is requested in case of mobile terminated location request.
In case of multi-numbering the MSISDN stored in a LCS CDR will be the primary MSISDN of the requesting party.
The structure of the MSISDN is defined in TS 23.003 [200].
5.1.4.2.13	User Error
This parameter is sent by the responder when the location request has failed or cannot proceed and if present, takes one of the following values defined in TS 29.002 [214]:
-	System Failure;
-	Data Missing;
-	Unexpected Data Value;
-	Facility Not Supported;
-	Unidentified Subscriber;
-	Illegal Subscriber;
-	Illegal Equipment;
-	Absent Subscriber (diagnostic information may also be provided);
-	Unauthorised requesting network;
-	Unauthorised LCS Client with detailed reason;
-	Position method failure with detailed reason.
5.1.4.2.14	Visited GMLC Identity
This field contains the IP address of the Visited GMLC (V-GMLC) involved in the location request.
5.1.4.3	PoC CDR parameters
5.1.4.3.0	Introduction
This clause contains the description of each field of the PoC CDRs specified in TS 32.272 [32].
5.1.4.3.1	Called Party Address
Called Party Address is of type UTF8String. It indicates address (Public User ID, SIP URL, E.164, etc.) of the participants involved in the PoC session.
5.1.4.3.2	Charged Party
This field indicates the party accepting the charge for the session, whether participating in the session or not. The contents are obtained from the Charged-Party AVP in offline charging. 
5.1.4.3.3	List of Talk Burst Exchange
This list contains a number of containers consisting of the following fields:
Change Condition
Change Time
Number of participants
Number of received talk bursts
Number of talk bursts
Received talk burst volume
Received talk bursts time
Talk burst volume
Talk bursts time

Number of talk bursts and Number of received talk bursts indicate the number of talk bursts sent and received respectively by the charged party (for the participating PoC functions) or for the whole session (for the controlling PoC function).
Talk burst volume and Received talk burst volume indicate the total data volume for talk bursts sent and received respectively by the charged party (for the participating PoC functions) or for the whole session (for the controlling PoC function).
Talk burst Time and Received talk burst time indicate the total duration of talk bursts sent and received respectively by the charged party (for the participating PoC functions) or for the whole session (for the controlling PoC function).
Change Time is a time stamp, which defines the moment when the container is closed or the CDR is closed.
Change Condition indicates the reason for closing the container and the addition of a new container. 
Number of participants indicates the number of attached participants involved in the talk burst exchange within a container.
5.1.4.3.4	Number of participants
For PoC, this field indicates the number of active participants within the PoC session. For MMtel Charging, this field indicates the number of active participants attached in the MMTel conference.
5.1.4.3.5	Participant Access Priority
This field indicates the access priority for each participant involved in the PoC session.
5.1.4.3.6	Participants involved
This field indicates the participants involved in the PoC session.
The field is of type grouped. It contains the participant address (Called party address), the participant access priority and User Participating Type.
5.1.4.3.7	PoC controlling address
This field contains the address of the server performing the controlling PoC function.
5.1.4.3.8	PoC Event Type
This field contains the PoC session unrelated charging event type.
5.1.4.3.9	PoC group name
This field indicates the name of a group used for the PoC session.
5.1.4.3.10	PoC session id
This field uniquely identifies the overall PoC session.
5.1.4.3.11	PoC session initiation type
The field is of type Enumerated. It identifies the type of the PoC session initiation.
The identifier can be one of the following:
    0 Pre-established
    1 On-demand
5.1.4.3.12	PoC session type
The field identifies the type of the PoC session.
5.1.4.3.13	User location info
This field contains any available location information for the charged party. The field is coded as per the 3GPP-User-Location-Info RADIUS VSA defined in TS 29.061 [216].
5.1.4.3.14	User Participating Type
Indicates the User Participating Type participating in the PoC session i.e. Normal, NW PoC Box, UE PoC Box.
5.1.4.4	MBMS CDR parameters
5.1.4.4.0	Introduction
This clause contains the description of each field of the MBMS CDRs specified in TS 32.273 [33].
5.1.4.4.1	CN IP Multicast Distribution
This field is used to indicate if IP multicast distribution to UTRAN is used for the MBMS user plane data.
5.1.4.4.2	MBMS 2G 3G Indicator
The MBMS 2G 3G Indicator is used to indicate the radio access type that can receive the MBMS bearer service.
5.1.4.4.2A	MBMS Data Transfer Start
The field contains the absolute time stamp of the data delivery start. The value indicates the time in seconds for the radio resources set up relative to 00:00:00 on 1 January 1900 (calculated as continuous time without leap seconds and traceable to a common time reference) where binary encoding of the integer part is in the first 32 bits and binary encoding of the fraction part in the last 32 bits. The fraction part is expressed with a granularity of 1/2**32 second.
This field is only valid for E-UTRAN access type.
5.1.4.4.2B	MBMS Data Transfer Stop
The field contains the absolute time stamp of the data delivery stop. The value indicates the time in seconds for the release of radio resources relative to 00:00:00 on 1 January 1900 (calculated as continuous time without leap seconds and traceable to a common time reference) where binary encoding of the integer part is in the first 32 bits and binary encoding of the fraction part in the last 32 bits. The fraction part is expressed with a granularity of 1/2**32 second.
This field is only valid for E-UTRAN access type.
5.1.4.4.3	MBMS GW Address
This parameter holds the IP-address of the MBMS GW that generated the Charging Id when MBMS GW is stand-alone.
5.1.4.4.4	MBMS Service Area
The field indicates the area over which the MBMS bearer service has to be distributed.
5.1.4.4.5	MBMS Service Type
The field is used to indicate the type of MBMS bearer service: multicast or broadcast.
5.1.4.4.6	MBMS Session Identity
This field together with TMGI identifies a transmission of a specific MBMS session. 
5.1.4.4.7	Required MBMS Bearer Capabilities
The field contains the minimum bearer capabilities the UE needs to support.
5.1.4.4.8	TMGI
The field contains the Temporary Mobile Group Identity allocated to a particular MBMS bearer service. TMGI use and structure is specified in  TS 23.003 [200].
5.1.4.5	MMTel CDR parameters
5.1.4.5.0	Introduction
This subclause contains the description of each of the CDR fields needed to support the charging of MMTel services as specified in TS 32.275 [35].
5.1.4.5.1	Associated Party Address 
This field holds the address (SIP URI or Tel URI) of the user, for MMTel supplementary service this field is used for :   the "forwarding party" for CDIV, the "transferor" for ECT, the "Pilot Identity" for FA and the "Initiator party" for 3PTY, as specified in TS 32.275 [35]. The content is obtained from the Associated-Party-Address AVP.
5.1.4.5.2	List of Supplementary services 
This list includes several MMTel Supplementary services. Each Supplementary Service may  contain  the following fields as specified in TS 32.275 [35] : 
-	Service Type;
-	Service Mode;
-	Number Of Diversions;
-	Associated Party Address; 
-	Service ID;
-	Change Time;
-	Number Of Participants;
-	Participant Action Type;
-	AoC information.
Service Type  is defined in clause 5.1.4.5.6
Service Mode is defined in clause 5.1.4.5.5
Number Of Diversions  is defined in clause 5.1.4.5.3
Associated Party Address is defined in clause 5.1.4.5.1 
Service ID is an identifier of the conference.
Change Time is a time stamp, which defines the moment when the conference participant has an action (e.g. creating the conference, joining in the conference, being invited into the conference or quitting the conference) triggering the Accounting Request message to CDF in MMTel Charging.
Number Of Participants indicates the number of attached participants involved in the conference.
Participant Action Type indicates the participant's action type during the conference. It is just for Billing Domain's information in each CDR, e.g. creating the conference, joining in the conference, being invited into the conference and quitting the conference. CUG Information indicates the "CUG interlock code" used during the "Closed User Group" communication.
AoC information is defined in clause 5.1.3.1.3A.
5.1.4.5.3 	Number Of Diversions
This field identifies the number of diversions related to a CDIV service as defined in TS 32.275 [35] and TS 24.604 [211]. When counting the number of diversions, all types of diversion are included.
5.1.4.5.4 	Participant Action Type
This field indicates the participant's action type during the conference. The content is obtained from the Participants-Action-Type AVP in TS 32.299 [50].
5.1.4.5.5	Service Mode
This field of Supplementary service indicates the mode for MMTel supplementary services (e.g.  CDIV, CB and ECT). The content is obtained from the Service-Mode AVP and described in TS 32.299 [50]. 
Service Mode values   1024 are reserved for specific Network/Manufacturer variants.
5.1.4.5.6	Service Type
This field identifies the MMTel supplementary service type as defined in TS 32.275 [35]. . The content is obtained from the MMTel-SService-Type AVP and described in TS 32.299 [50]. 
Service Type values   1024 are reserved for specific Network/Manufacturer variants
5.1.4.5.7	Void
5.1.4.6	SMS CDR parameters
5.1.4.6.0	Introduction
This clause contains the description of each field of the SMS CDRs specified in TS 32.274 [34].
5.1.4.6.1	Event Timestamp
This field contains the timestamp of the event that triggered the generation of charging information for the SMS transaction. 
5.1.4.6.0A	Carrier Select Routing
This field contains information on carrier select routing, received by S-CSCF during ENUM/DNS processes.
5.1.4.6.1A	External Identifier
This field contains the External Identifier of the UE, which identifies a subscription associated to an IMSI, as specified in TS 23.003 [200].  
5.1.4.6.2	Local Record Sequence Number
This field includes a unique record number created by this node. The number is allocated sequentially The number is allocated sequentially including all CDR types. The number is unique within the CDF.
The field can be used e.g. to identify missing records in post processing system.
5.1.4.6.3	Message Class
This field contains a class of messages such as personal, advertisement, information service. For more information see TS 23.140 [206].
5.1.4.6.4	Message Reference
This field contains the identity used to identify a Short Message in the SMS node associated with entity that submitted it, and corresponds to the TP-Message-Reference (TP-MR) as defined in TS 23.040 [201]. 
5.1.4.6.5	Message Size
This field contains the length of the user data part of the Short Message, corresponding to the TP-User-Data-Length (TP-UDL) as defined in TS 23.040 [201].
5.1.4.6.6	MTC IWF Address
This field contains the MTC IWF address. 
5.1.4.6.6A	Number Portability Routing
This field contains information on number portability routing, received by S-CSCF during ENUM/DNS processes.
5.1.4.6.7	Originator IMSI
This field contains IMSI of the originator of the Short Message. The structure of the IMSI is defined in TS 23.003 [200].
5.1.4.6.8	Originator Info
This field contains a set of information on the originator of the Short Message, and includes following elements:
-	Originator IMSI
-	Originator MSISDN
-	Originator Other Address
-	Originator SCCP Address
-	Originator Received Address
-	SM Originator Interface
-	SM Originator Protocol Id
These fields are described in the appropriate subclause. 
5.1.4.6.9	Originator MSISDN
This field contains MSISDN (E.164 number [308]) of the originator of the Short Message. 
5.1.4.6.10	Originator Other Address
This field contains the addressee of an originator of the Short Message other than IMSI and MSISDN: e.g. short code, email. 
5.1.4.6.11	Originator Received Address
This field contains the original address of the originator of the Short Message, as received by the SMS node.
5.1.4.6.12	Originator SCCP Address
This field contains the SCCP calling address used to receive the Short Message at the SMS node.
5.1.4.6.12A	PDP Address
This field contains the UE IP address used by the subscriber for the SMS transaction.
5.1.4.6.13	RAT Type
This field contains the Radio Access Technology (RAT) type used for the SMS transaction, as provided to the SMS Node, and specified in TS 29.061 [216] 3GPP RAT Type.
5.1.4.6.14	Recipient IMSI
This field contains IMSI of a Recipient of the Short Message. The structure of the IMSI is defined in TS 23.003 [200].
5.1.4.6.15	Recipient Info
This field contains a set of information on a Recipient of the Short Message, and includes following elements:
-	Recipient IMSI
-	Recipient MSISDN
-	Recipient Other Address
-	Recipient Received Address
-	Recipient SCCP Address
-	SM Destination Interface
-	SM Recipient Protocol Id
These fields are described in the appropriate subclause. 
5.1.4.6.16	Recipient MSISDN
This field contains MSISDN (E.164 number [308]) of a Recipient of the Short Message. 
5.1.4.6.17	Recipient Other Address
This field contains the addressee of a Recipient of the Short Message other than IMSI and MSISDN: e.g. short code, email.... 
5.1.4.6.18	Recipient Received Address
This field contains the original address of the originator of the Short Message, as received by the SMS node.
5.1.4.6.19	Recipient SCCP Address
This field contains the SCCP called address used by the SMS node to onward deliver the Short Message.
5.1.4.6.20	Record Type
The field identifies the type of the record, see TS 32.250 [10].
5.1.4.6.21	Record Extensions
The field enables network operators and/or manufacturers to add their own extensions to the standard record definitions.
5.1.4.6.22	Served IMEI
This fields contains the international mobile equipment identity (IMEI) or IMEISV of the equipment served. The term "served" equipment is used to describe the UE involved in the SMS transaction recorded.
The structure of the IMEI, IMEISV is specified in TS 23.003 [200].  
5.1.4.6.22A	Session ID
This fields contains the SIP CALL ID of the SIP session, as defined in the Session Initiation Protocol RFC 3261 [401].
5.1.4.6.23	SM Data Coding Scheme
This field contains the data coding scheme used within the Short Message and corresponds to TP-DCS header.
5.1.4.6.24	SM Delivery Report Requested
This field contains an indication whether a delivery report is requested by the Short Message originator.
5.1.4.6.25	SM Destination Interface
This field contains the information describing the interface on which the Short Message is to be delivered by the SMS node.
5.1.4.6.26	SM Device Trigger Indicator
This field contains  indication whether the Short Message submission/delivery to/from  SMS-SC is related  to Device Trigger, and which Device trigger action is requested: request, replace or recall.
5.1.4.6.27	SM Device Trigger information
This field contains the set of information related to SMS submission to SMS-SC for Device Trigger, and includes following elements:
-	MTC IWF Address
-	SM DT Reference Number
-	SM Serving Node
-	SM DT Validity Period
-	SM DT Priority Indication
-	SMS Application Port ID
These fields are described in the appropriate subclause. 
5.1.4.6.28	SM Discharge Time
This field contains the time associated with the event being reported in the Short Message Status field as defined in TS 23.040 [201]. This information is only applicable to delivery report charging procedures
5.1.4.6.29	SM DT Priority Indication
This field holds the priority of the device trigger request received via T4 reference point, as specified in TS 29.337 [231].
5.1.4.6.30	SM DT Reference Number
This field contains the Reference Number related to the device trigger request received via T4 reference point, as specified in TS 29.337 [231].
5.1.4.6.31	SM DT Validity Period
This field contains the validity period of the device trigger request received via T4 reference point, as specified in TS 29.337 [231].
5.1.4.6.32	SM Message Type
This field contains the message type that triggered the generation of charging information: submission, delivery report, SM Service Request, T4 Device Trigger, or SM Device Trigger, or MO-SMS T4 submission.
5.1.4.6.33	SM Originator Interface
This field contains the information describing the interface on which the Short Message was received by the SMS node
5.1.4.6.34	SM Originator Protocol Id
This field contains the TP-PROTOCOL-ID (TP-PID) as defined in TS 23.040 [201] describing the protocol used for the Short Message by originator.
5.1.4.6.35	SM Priority
This field contains any priority information associated with a Short Message, as defined in TS 23.040 [201].
5.1.4.6.36	SM Recipient Protocol Id
This field contains the TP-PROTOCOL-ID (TP-PID) as defined in TS 23.040 [201], describing the protocol used for the Short Message to the recipient.
5.1.4.6.37	SM Reply Path Requested
This field contains an indication of whether a reply Short Message to an original Short Message shall follow the same path and corresponds to the TP-Reply-Path (TP-RP) flag. 
5.1.4.6.38	SMS Application Port ID
This field holds the Application Port ID of  triggering application for the device trigger request received via T4 reference point, as specified in TS 29.337 [231] , or the Application port ID associated with the UE on MO delivery to the SCS.
5.1.4.6.39	SM Sequence Number
This field contains the sequence number of the SMS within the concatenated short message when part of concatenated short message. 
5.1.4.6.40	SM Serving Node
This field contains  the serving node identity, i.e. SGSN/MME/MSC identity serving the UE, received from MTC-IWF via T4 reference point for device trigger, as specified in TS 29.337 [231].
5.1.4.6.41	Void
5.1.4.6.42	Void
5.1.4.6.43	SM Status
This field contains the information from the TP-Status field in a Status-Report TPDU as defined in TS 23.040 [201]. This information is only applicable to delivery report charging procedures.
5.1.4.6.44	SM Total Number
This field contains the total number of short messages when the SMS is part of concatenated short message. 
5.1.4.6.45	SM User Data Header
This field contains the user data header extracted from the user data of the SM, corresponding to the user data header (TP-UDH) is specified in TS 23.040 [201].
5.1.4.6.45A	SMS Node Address
This field contains the Address of the SMS Node that produced the record: assigned E.164 number.
5.1.4.6.45B	SMS Result
The field contains the result of an attempt for a Short Message transaction (submission or delivery) at SMS Service Center, when unsuccessful.
5.1.4.6.46	Submission Time
This field contains the timestamp of when the submitted Short Message arrived at the originating SMS Node, obtained from the TP-Service-Center-Time-Stamp (TP-SCTS) as defined in TS 23.040 [201].
5.1.4.6.47	UE Time Zone
This field contains the “Time zone”  as specified in TS 29.060 [215], provided for the Mobile User during the SMS transaction.
5.1.4.6.48	User Location Info
This field contains the information about the location of the subscriber during the SMS transaction , as provided to the SMS Node, and specified in TS 29.061 [216] 3GPP user location.
5.1.4.7	ProSe CDR parameters
5.1.4.7.0	Introduction
This clause contains the description of each field of the ProSe CDRs specified in TS 32.277 [37].
5.1.4.7.0A	Announcing PLMN ID
This field contains PLMN identity of the serving PLMN which signalled the carrier frequency, when this serving PLMN is not the HPLMN or VPLMN, if available.
5.1.4.7.1	Announcing UE HPLMN Identifier
This field contains identifier of Announcing UE HPLMN (MCC and MNC). 
5.1.4.7.2	Announcing UE VPLMN Identifier
This field contains PLMN identity (MCC and MNC) of VPLMN for announcing UE. This field corresponds to Monitored PLMN ID in match report request, as defined in TS 23.303[235] clause 5.3.4. In this case it’s the same with Announcing UE HPLMN Identifier when non-roaming.
5.1.4.7.3	Application ID
This field carries a globally unique identifier identifying a specific 3rd party application, as upper layer of ProSe.
5.1.4.7.4	Cause for Record Closing
This field contains a reason for the release of the CDR. In case of Rf interface is used, it is derived from Change-Condition AVP at ProSe-information AVP level defined in TS 32.299 [50], when received. The following is included:-	proximity alerted: It corresponds to "Proximity Alerted" in Change-Condition AVP.
-	time expired with no renewal: It corresponds to "Time Expired With No Renewal" in Change-Condition AVP.
-	requestor cancellation: It corresponds to "Requestor Cancellation" in Change-Condition AVP.
-	time limited: It corresponds to "Time Limit" in Change-Condition AVP.
-	maximum number of reports: It corresponds to "Max Number of reports" in Change-Condition AVP. 
-	abnormal release: It corresponds to "Abnormal Release" in Change-Condition AVP.
5.1.4.7.5	Direct Discovery Model
This field indicates model of the Direct Discovery used by the UE, i.e. Model A, Model B. 
5.1.4.7.5A	Discoveree UE HPLMN Identifier
This field contains identifier Discoveree of Discoveree UE HPLMN.
5.1.4.7.5B	Discoveree UE VPLMN Identifier
This field contains identifier of Discoveree UE VPLMN.
5.1.4.7.5C	Discoverer UE HPLMN Identifier
This field contains identifier of Discoverer UE HPLMN.
5.1.4.7.5D 	Discoverer UE VPLMN Identifier
This field contains identifier of Discoverer UE VPLMN.
5.1.4.7.6	Layer two Group ID
This field contains the identifier of a ProSe communication group, uniquely represents a specific one to-many ProSe Direct Communication and is included in CDRs for each participants in the specific group.
5.1.4.7.6A	List of Application Specific Data
This field contains a list of data blocks provided by the application in the UE. The content of each block is application-specific.
5.1.4.7.6B	List of Coverage Info
This field contains a list of coverage status changes with time stamps. When in coverage, additionally includes list of location changes (i.e., ECGI change) and time stamps.
5.1.4.7.6C	List of Radio Parameter Sets
This field contains a list of radio parameter sets configured in the UE for direct communication use. Each set has an associated time stamp of when it became active.
5.1.4.7.7	List of Reception Data Containers and List of Transmission Data Containers
The same structure is used to convey both the List of Reception Data Containers and the List of Transmission Data Containers. Each list includes a list of changes in trigger conditions (e.g. change of PLMN, go out of coverage, come back to coverage, etc.) for a specific Communication. Each change is time stamped. Trigger condition is used to categorize received or transmitted data volumes, respectively, such as per coverage status duration. Each Direct Communication data containers may include the following fields:
-	Local Sequence Number
-	Change Time.
-	Coverage status.
-	UE Location.
-	Data Volume (transmitted or received).
-	Change Condition.
-	VPLMN Identifier.
-	Usage Information Report Sequence Number.
-	Radio Resources Indicator.
-	Radio Frequency.
Local Sequence Number is a service data container sequence number. It starts from 1 and is increased by 1 for each service date container generated within the lifetime of this direct communication.
Change Time includes the time when the container is closed and reported due to ProSe charging condition change..
Coverage status indicates whether UE is served by E-UTRAN or not, i.e. enter coverage, leave coverage.
UE Location	contains the location information of the UE, i.e. ECGI
Data Volume is the amount of data received or transmitted by UE.
Change Condition contains the reason for closing the container, e.g. change of PLMN, go out of coverage, come back to coverage.
VPLMN Identifier contains the identifier of PLMN (MCC and MNC) that the UE visits.
Usage Information Report Sequence Number contains the sequence number of usage information report, which is used to generate the container.
Radio Resource Indicator identifies whether the operator-provided radio resources or the configured radio resources were used for ProSe direction communication.
Radio Frequency identifies the radio frequency used for ProSe direct communication.
5.1.4.7.7A	List of Transmitters
This field contains a list of transmitters detected for the group. The information stored consists of the source IP address and the ProSe UE ID for each transmitter.
5.1.4.7.8	Monitored PLMN Identifier
This field carries Monitored PLMN ID (MCC and MNC) in Match Report request, as defined in TS 23.303[235] clause 5.3.4. It corresponds to the Announcing UE VPLMN Identifier when roaming and Announcing UE HPLMN Identifier when non-roaming.
5.1.4.7.9	Monitoring UE PLMN Identifier
This field contains identifier of monitoring UE PLMN (MCC and MNC).
5.1.4.7.10	Monitoring UE Identifier
This field carries identifier of the party who initiate Monitor/Match report, i.e. IMSI, which corresponds to UE Identifier parameter in Monitor/Match report request, as defined in TS 23.303[235].
5.1.4.7.11	Monitoring UE VPLMN Identifier
This field contains identifier of Monitoring UE VPLMN (MCC and MNC).
5.1.2.7.12	Node ID
This field contains an optional, operator configurable, identifier string for the node that had generated the CDR. 
The Node ID may or may not be the DNS host name of the node.
5.1.4.7.13	PC Three Control Protocol Cause
This field holds the particular reason why a DISCOVERY_REQUEST or Match_Report messages from the UE have been rejected by the ProSe Function.
5.1.4.7.14	PC Three EPC Control Protocol Cause
This field holds the particular reason why a proximity request messages from the UE have been rejected by the ProSe Function.
5.1.4.7.14A	PC5 Radio Technology
This field indicates the PC5 radio technology that the UE used for ProSe Direct Discovery.
5.1.4.7.15	ProSe Application ID
This field carries an identity used for ProSe direct discovery, identifying application related information for the ProSe-enabled UE.
5.1.4.7.16	ProSe Event Type
This field indicates ProSe  charging event, i.e. open Announcing, open Monitoring, open Match Report, restricted Announcing, restricted Monitoring, restricted Match Report, restricted Discovery Request and restricted Discovery Reporting.
5.1.4.7.17	ProSe Function ID
This field holds the FQDN that identifies a ProSe Function.
5.1.4.7.18	ProSe Function IP Address
This field holds the IP-address of the ProSe Function.  
5.1.4.7.19	ProSe Function PLMN Identifier
This field holds the PLMN Identifier (MCC and MNC) of the ProSe Function.  
5.1.4.7.20	ProSe Group IP multicast address
This field holds The IP multicast address to be used for performing ProSe Direct Communication.
5.1.4.7.21	ProSe Reason for Cancellation
This field contains a reason for proximity request session is cancelled. In case of Rf interface is used, it is derived from ProSe-Reason-For-Cancellation AVP at ProSe-Information AVP level defined in TS 32.299 [50], when received. The following is included:
-	Proximity alerted: When ProSe Function determines that two UEs are in proximity, a PROXIMITY_ALERT message is sent to UE. It corresponds to "Proximity alerted" in ProSe-Reason-For-Cancellation AVP.
-	Time expired with no renewal: Allowed time windows is expired and no renewal request is received from UE. It corresponds to "Time expired with no renewal" in ProSe-Reason-For-Cancellation AVP.
-	Requestor cancellation: a CANCEL_PROXIMITY_REQUEST message is received from UE. It corresponds to "Requestor cancellation" in ProSe-Reason-For-Cancellation AVP.
5.1.4.7.22	ProSe Request Timestamp
This field holds the timestamp when ProSe Request is received from UE. 
5.1.4.7.22A	ProSe Target Layer-2 ID
This field carries the identifier of UE, uniquely represents a specific one-to-one ProSe Direct Communication.
5.1.4.7.23	ProSe UE ID
This field carries a link layer identifier assigned by the EPS that uniquely represents the UE in the context of ProSe Direct Communication.
5.1.4.7.23A	ProSe UE-to-Network Relay UE ID
The fields holds a link layer identifier that uniquely represents the ProSe UE-to-Network relay UE in the context of ProSe Direct Communication via UE-to-Network.
5.1.4.7.24	Proximity Alert Indication
This field indicates whether proximity alert has been sent before proximity request cancellation. 
5.1.4.7.25	Proximity Alert Timestamp
This field holds the timestamp when proximity alert is sent, to indicate two UEs are in proximity.
5.1.4.7.26	Proximity Cancellation Timestamp
This field holds the timestamp when proximity request cancellation is requested.
5.1.4.7.27	Proximity Request Renewal Info Block List
This field holds a list of information blocks that are added by each of the  Proximity Request renewal messages captured in the CDR. The information block contains information of the renewal request, e.g. timestamp, time window, range class, and UE location. Each Proximity Request Renewal Info Block may include the following fields:
-	ProSe Request Timestamp
-	Time Window
-	Range Class
-	UE Location
ProSe Request Timestamp is the time when ProSe Renewal Request is received from UE.
Time Window is the time interval in minutes during which a proximity renewal request is valid.
Range Class is the range class for a specific proximity renewal request.
UE Location the UE location with the best known accuracy (e.g. Cell ID or geo-location coordinates) at the time for the renewal request.
5.1.4.7.28	Range Class
This field carries a range class for a specific proximity request, e.g. 50 m, 100 m, 200 m, 500 m, 1000 m, which as "Range Class" defined in TS 24.334 [236].
5.1.4.7.29	Reason for Cancellation
This field indicates the reason for cancellation of an EPC-level Discovery request, i.e. Proximity alerted, Time expired with no renewal, Requestor cancellation.
5.1.4.7.30	Record Type
The field identifies the type of the record i.e. PF-DD-CDR, PF-ED-CDR and PF-DC-CDR.
5.1.4.7.30A	Relay IP address
The field carries the IP address used as ProSe UE-to-Network Relay UE address for performing ProSe Direct Communication via UE-to-Network.
5.1.4.7.31	Requested Application Layer User ID
This field carries the user identifier designated in 3rd party application for the user who is targeted in proximity request. 
5.1.4.7.32	Requested PLMN Identifier
This field contains PLMN identifier (MCC and MNC) of the user who is targeted in proximity request.
5.1.4.7.33	Requestor Application Layer User ID
This field carries the user identifier designated in 3rd party application for the user who initiate EPC-level ProSe discovery request.
5.1.4.7.34	Requestor EPC ProSe User ID
This field carries the identifier generated in ProSe Function for UE who initiate EPC-level ProSe Discovery request.
5.1.4.7.35	Requestor PLMN Identifier
This field contains PLMN identifier (MCC and MNC) of the user who initiate proximity request.
5.1.4.7.36	Role Of ProSe Function
This field indicates ProSe Function resides in which PLMN, i.e. HPLMN, VPLMN, Local PLMN.
5.1.4.7.37	Role Of UE
This field indicates role of the UE using ProSe served by the ProSe Function who generates the CDR, e.g. Announcing UE, Monitoring UE.
5.1.4.7.38	Source IP address
This field holds the IP address UE used as source address for performing ProSe Direct Communication.
5.1.4.7.38a	Target IP address
The field holds the IP address used as target address for performing ProSe Direct one-to-one Communication.
5.1.4.7.38A	Time of First Reception
This field contains the time when collection of reception data is started for the group in this CDR, i.e., the first one-to-many direct communication reception started.
5.1.4.7.38B	Time of First Transmission
This field contains the time when collection of transmitted data is started for the group in this CDR, i.e., the first one-to-many direct communication transmission started.
5.1.4.7.39	Time Window
This field specify a time interval in minutes during which a proximity request is valid. The Time Window is in the range of 1 – 1440 minutes.
5.1.4.7.40	UE Location
This field carries the UE location with the best known accuracy (e.g. Cell ID or geo-location coordinates). The UE Location is set to the cell identity part of the Evolved Cell Global Identifier and obtained from the lower layers of the UE. The value of UE Location is with fixed length of 28 bits.
5.1.4.7.41	Validity Period
This field holds the time interval duration in minutes during which user is authorized for using ProSe Direct Discovery functionality (e.g. Announcing, Monitoring, Match reporting).
5.1.4.7.42	WLAN Link Layer ID
This field carrys WLAN link layer identifier.
5.1.4.8	Monitoring Event CDR parameters
5.1.4.8.0	Introduction
This clause contains the description of each field of the Monitoring Event CDRs specified in TS 32.278 [38].
5.1.4.8.1	Accuracy
This field contains desired level of accuracy of the requested location information and is applicable to the "Location Reporting" Monitoring Event type. Accuracy could be at cell level (CGI/ECGI), eNB, TA/RA level.
5.1.4.8.2	Chargeable Party Identifier
This field identifies the entity towards which accounting/charging functionality is performed by the involved 3GPP network elements.
5.1.4.8.3	Event Timestamp
This field contains the timestamp of the event that triggered the generation of charging information for the Monitoring Event action. 
5.1.4.8.4	List of Locations
This field identifies the list of cells, eNBs and/or RAI(s)/TAI(s) for determination of the number of UEs in the area and is applicable to the "Number of UEs present in a geographic area" Monitoring Event type.
5.1.4.8.5	List of Monitoring Event Report Data
This list includes charging information for one or more Monitoring Event reports. Each Monitoring Event Report Data container may include the following fields:
-	Event Timestamp
-	SCEF Reference ID
-	SCEF Id
-	Monitoring Event Report Number
-	Chargeable Party Identifier
-	Monitored User
-	Monitoring Type
-	Reachability Information
-	Reported Location
-	Communication Failure Information
-	List of Number Of UE Per Location Reports
Event Timestamp is a time stamp, which defines the moment when the event triggered the generation of charging information for the Monitoring Event report.  
SCEF Reference ID is the identifier created by the SCEF, to identify a Monitoring Request. When combined with the SCEF Id, serves as a globally unique identifier for the Monitoring Request.
SCEF Id is the identifier of the SCEF to which the Monitoring Event Report message was sent.
Monitoring Event Report Number contains the number of the report being sent for the specific request from this node. The number is monotonically increasing for each report starting at 1 for each unique request.
Chargeable Party Identifier identifies the entity towards which accounting/charging functionality is performed by the involved 3GPP network elements.
Monitored User identifies the user that is monitored and is applicable to the "Loss of connectivity", "UE reachability", "Location Reporting", "Communication Failure" and "Availability after DDN Failure" monitoring event types.
Monitoring Type identifies the specific Monitoring Event being reporting.
Reachability Information identifies the reachability status of the UE and is applicable to the "UE reachability" Monitoring Event type.
Reported Location indicates the reported 3GPP system specific location information and is applicable to the "Location Reporting" Monitoring Event type.
Communication Failure Information indicates the reported the reason for communication failure and is applicable to the "Communication Failure" Monitoring Event type.
List of Number of UE per Location Reports contains a list of the location information along with the number of UEs found at that location by the MME/SGSN. It is applicable to the "the number of UEs at a given geographic location" Monitoring Event type.
5.1.4.8.6	Local Record Sequence Number
This field includes a unique record number created by this node. The number is allocated sequentially for each CDR including all CDR types. The number is unique within one node, which is identified either by field Node ID or by record-dependent node address.
The field can be used e.g. to identify missing records in post processing system.
5.1.4.8.7	Location Type
This field identifies whether the request is for Current Location or Last Known Location and is applicable to the "Location Reporting" and "Number of UEs present in a geographic area" Monitoring Event type.
5.1.4.8.8	Maximum Detection Time
This field identifies the maximum period of time without any communication with the UE after which the SCEF is to be informed that the UE is considered to be unreachable and is applicable to the "Loss of connectivity" Monitoring Event type. The value is on the order of 1 minute to multiple hours.
5.1.4.8.9	Maximum Number of Reports
This field identifies the maximum number of event reports to be generated until the associated Monitoring Event is considered to expire. A value of one implies a single event report is to be generated which makes it equivalent to a One-time Monitoring Request. This parameter is not applicable to the "Availability after DDN Failure" Monitoring Event type.
5.1.4.8.10	Monitored User
This field identifies the user that is monitored and is applicable to the "Loss of connectivity", "UE reachability", "Location Reporting", "Communication Failure" and "Availability after DDN Failure" Monitoring Event types.
5.1.4.8.11	Monitoring Duration
This field identifies the absolute time at which the related Monitoring Event request is considered to expire.
5.1.4.8.12	Monitoring Event Config Status
This field identifies whether the request was successful or not. When the request is not successful, a specific value is chosen to indicate the error occurred during handling of the Requested action for the Monitoring event.
5.1.4.8.13	Monitoring Event Configuration Activity
This field indicates Monitoring Event Configuration Activity, i.e. create, transfer, update, and delete.
5.1.4.8.14	Monitoring Type
This field identifies the specific Monitoring Event being requested, which can have the following values:
-	Loss of connectivity.
-	UE reachability.
-	Location Reporting.
-	Communication Failure.
-	Availability after DDN Failure
-	Number of UEs present in a geographic area. 
5.1.4.8.15 	Node ID
This field contains an optional, operator configurable, identifier string for the node that had generated the CDR. 
The Node ID may or may not be the DNS host name of the node.
5.1.4.8.16	Reachability Configuration
This field contains the details for configuration for UE reachability, including reachability type, maximum latency and maximum response time.
5.1.2.8.17	Record Opening Time
A time stamp reflecting the time the CDF opened this record.
5.1.2.8.18	Record Type
The field identifies the type of the record i.e. ME-CO-CDR and ME-RE-CDR.
5.1.2.8.19		Retransmission
This parameter, when present, indicates that information from retransmitted Accounting Requests have been used in this CDR.
5.1.4.8.20	SCEF ID
This field contains identifier of the SCEF to which the Monitoring Event Report message was sent.
5.1.4.8.21	SCEF Reference ID
When combined with the SCEF ID, this field serves as a globally unique identifier for the Monitoring Event Request.
5.1.5	Common charging data in CHF-CDR
5.1.5.0	CHF record (CHF-CDR)
If enabled, CHF records shall be produced for chargeable events, with or without quota management. The generic fields in the record are specified in table 5.1.5.0.1. The NF specific parts will be concatenated to this e.g. the PDU Session Information, PDU Container Information and Roaming QBC Information are concatenated for the SMF.
Table 5.1.5.0.1: CHF record (CHF-CDR)
Field
Category
Description
Record Type 
M
CHF record.
Recording Network Function ID
OM
This field holds the name of the recording entity, i.e. the CHF id.
Charging Session Identifier
OC
This field holds the Session Identifier described in TS 32.290 [57].
Subscriber Identifier
OM
This field holds the 5G Subscription Permanent Identifier (SUPI) of the served party as specified in TS 29.571 [249], if available.
Tenant Identifier
OM
This field holds the tenant identifier
MnS Consumer Identifier
OM
This fields holds the identifier of the MnS Consumer.
NF Consumer Information
M
This field holds the information of the NF consumer of the charging service.
NF Functionality
M
This field holds the type of functionality the NF provides.
NF Name
OC
This field holds the name of the NF used.
NF Address
OC
This field holds the IP Address of the NF used.
NF PLMN ID
OC
This field holds the PLMN identifier (MCC MNC) of the NF.
Charging Identifier
OM
Charging identifier for correlation between different records. Only applicable if not available in the service specific information.
Triggers
OC
This field holds the triggers that are common to all Multiple Unit Usage. Can be the same as in Used Unit Container.
SMF Triggers
OC
This field holds the 5G data connectivity specific triggers described in TS 32.255 [15].
List of Multiple Unit Usage
OC
This field holds the parameters for the unit reporting. It may have multiple occurrences.
Rating Group
M
This filed holds the rating group. The parameter corresponds to the Charging Key as specified in TS 23.203 [203]
Used Unit Container
OC
This field holds the used units and information connected to the reported units.
Service Identifier
OC
This field holds the Service Identifier.
Quota management Indicator
OC
This field holds an indicator on whether the reported used units are with or without quota management control. If the field is not present, it indicates the used unit is without quota management applied. 
Local Sequence Number
OM
This field holds the container sequence number.
Time
OC
This field holds the amount of used time.
Uplink Volume 
OC
This field holds the amount of used volume in uplink direction.
Downlink Volume 
OC
This field holds the amount of used volume in downlink direction.
Total Volume
OC
This field holds the amount of used volume in both uplink and downlink directions.
Service Specific Units
OC
This field holds the amount of used service specific units.
Event Time Stamp
OC
This field holds the timestamps of the event reported in the Service Specific Units, if the reported units are event based. 
Rating Indicator
OC
This field indicates if the units have been rated or not.
Triggers
OC
This field holds the triggers that caused the Used Unit Container to be reported, independently on if they are PDU Session or RG level triggers.
SMF Triggers
OC
This field holds the 5G data connectivity specific triggers described in TS 32.255 [15].
Trigger Time Stamp
OC
This field holds the timestamp of the trigger.
PDU Container Information
OC
This field holds the 5G data connectivity specific information described in TS 32.255 [15].
NSPA Container Information
OC
This field holds the network slice performance and analytics container specific information described in TS 28.201 [151].
UPF ID
OC
This field holds the UPF identifier used to identify the UPF when reporting the usage for the UPF.
Record Opening Time
OC
Time stamp when the PDU session is activated in the SMF or record opening time on subsequent partial records.
Duration
M
This field holds the duration of this record.
Record Sequence Number
C
Partial record sequence number, only present in case of partial records.
Cause for Record Closing 
M
The reason for the release of the record.
Local Record Sequence Number
OM
Consecutive record number created by the CDF. The number is allocated sequentially including all CDR types.
Record Extensions
OC
A set of network operator/manufacturer specific extensions to the record. Conditioned upon the existence of an extension.
This field can be used to capture the specific information for charging.
Service Specification Information
OC
Identifies service specific document that applies to the request, e.g. the service specific document ('middle tier' TS) and 3GPP release the service specific document is based upon.
PDU Session Charging Information
OM
This field holds the 5G data connectivity specific information described in TS 32.255 [15]
Roaming QBC Information
OM
This field holds the roaming 5G data connectivity specific information described in TS 32.255 [15]
SMS Charging Information
OC
This field holds the SMS specific information described in TS 32.274 [34].
Registration Charging Information
OM
This field holds the 5G registration specific information described in TS 32.256 [16].
N2 connection charging Information
OM
This field holds the N2 connection specific information described in TS 32.256 [16].
Location reporting charging Information
OM
This field holds the Location reporting specific information described in TS 32.256 [16].
NEF API Charging Information
OM
This field holds the NEF API specific information described in TS 32.254 [14].
NSPA Charging Information
OM
This field holds the performance and analytics specific information described in TS 28.201 [151].
NSM charging Information
OM
This field holds the Network Slice Management (NSM) specific information described in TS 28.202 [71].

5.1.5.1	CHF CDR parameters
5.1.5.1.1	Introduction
This clause contains the description of each field of the CHF CDRs which are common to all CHF CDRs independent of Network Function using the Converged Charging service. This CDR will be concatenated with the Network Function specific information. 
5.1.5.1.2	Cause for Record Closing
This field contains a reason for the release of the CDR, in CHF case reception of Charging Data Request [Termination].
5.1.5.1.3	Duration
This field contains the relevant duration in seconds for the session. It is the duration from Record Opening Time to record closure. For partial records this is the duration of the individual partial record and not the cumulative duration.
5.1.5.1.4	List of Multiple Unit Usage
This list applicable in CHF-CDR and includes one or more containers.
Each container includes the following fields:
-	Rating Group This field holds the rating group. The parameter corresponds to the Charging Key as specified in TS 23.203 [203]
-	Used Unit Container This field holds the used units and information connected to the reported units.
-	PDU Container Information This field holds the 5G data connectivity specific information described in TS 32.255 [15].
-	UPF ID This field holds the UPF identifier used to identify the UPF when reporting the usage for the UPF.
-	Multi-homed PDU Address This field holds the IPv6 prefix used by UPF in a multi-homed PDU session.
5.1.5.1.5	Local Record Sequence Number
This field includes a unique record number created by this network function. The number is allocated sequentially for each partial CDR (or whole CDR) including all CDR types. The number is unique within one network function, which is identified by field Recording Network Function ID.
The field can be used to identify missing records in post processing system.
5.1.5.1.6	NF Consumer Information
This field contains the information about the NF that used the charging service. 
It includes the following fields:
- 	NF Functionality includes the functionality provided by the NF.
-	NF Name contains the UUID of the NF.
-	NF Address contains the IP-address and/or FQDN of the NF
-	NF PLMN ID holds the PLMN id of the NF
For further details see TS 23.003 [200].
5.1.5.1.7	Rating Group
The field identifies the rating group. The parameter corresponds to the Charging Key as specified in TS 23.203 [203].
5.1.5.1.8	Record Opening Time
This field contains the time stamp when the request Charging Data Request [Initial] is received in the CHF from the NF or Charging Data Request [Update] in the case of a partial record.
5.1.5.1.9	Record Sequence Number
This field contains a running sequence number employed to link the partial records generated in the CHF.
5.1.5.1.10	Record Type
The field identifies the type of the record i.e. CHF-CDR.
5.1.5.1.11	Recording Network Function ID
This field contains the UUID of the Network Function Instance ID assigned to the instance that produced the record. For further details see TS 23.003 [200].
5.1.5.1.12	Record Extensions
This field enables network operators and/or manufacturers to add their own recommended extensions to the standard record definitions. This field contains a set of "management extensions" as defined in X.721 [305]. 
This is conditioned upon the existence of an extension. This field may contain the specific information for converged charging (e.g. with quota management). 
5.1.5.1.13	Subscriber Identifier
This field contains the 5G Subscription Permanent Identifier (SUPI) of the served party, if available. For further details see TS 23.003 [200].
5.1.5.1.14	Used Unit Container
This list applicable in CHF-CDR includes one or more containers.
Each container includes the following fields:
-	Service Identifier may designate an end user service, a part of an end user service or an arbitrarily formed group thereof. 
-	Quota management Indicator holds an indicator on whether the reported used units are with or without quota management control. If the field is not present, it indicates the used unit is without quota management applied.
-	Local Sequence Number is the sequence number for the used unit containers, i.e. the order in which charging information was reported or used unit container was closed. 
-	Time includes the duration of a time based service. 
-	Uplink Volume  includes the number of octets transmitted during the use of the packet data services in the uplink direction. The counting of uplink data volumes is optional.
-	Downlink Volume  includes the number of octets transmitted during the use of the packet data services in the downlink direction.
-	Total Volume includes the total number of octets transmitted in both uplink and downlink direction.
-	Service Specific Units includes the number of units, specific for the service, used during the service. 
-	Event Time Stamp defines the moment when the event was reported in the Service Specific Units when event based charging applies. 
-	Rating Indicator indicates if the units have been rated or not.
-	Triggers includes the reason for charging information reporting or closing for the used unit container, the 5G data connectivity specific triggers are described in TS 32.255 [15].
-	Trigger Time Stamp is the date and time of the charging information reporting or closing for the used unit container.
-	PDU Container Information is the 5G data connectivity specific information described in TS 32.255 [15].
5.1.5.1.15	User Location Information
This field contains the User Location as described in 	TS 29.571 [249].
5.1.5.1.16	Service Specification Information
This field contains the Service Specification Information, e.g. the service specific document ('middle tier' TS) and 3GPP release the service specific document is based upon.
5.1.5.1.17	RAT Type
This field contains the Radio Access Technology (RAT) type used, as provided to CHF, it’s based on the RatType specified in TS 29.571 [249] with 3GPP RAT Type specified in TS 29.061 [216] added for backwards compatibility.
5.1.5.1.18	User Equipment (UE) Info
This field contains the identification of User Equipment (UE) accessing the 3GPP 5GS, i.e. PEI as specified in clause 6.4 TS 23.003 [200]. 
5.2	CDR abstract syntax specification
5.2.1	Generic ASN.1 definitions
This subclause contains generic CDR syntax definitions, where the term "generic" implies that these constructs are applicable for more than one domain/service/subsystem. Examples of this are syntax definitions that are imported from non-charging 3GPP TSs, e.g. TS 29.002 [214].
.$GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}  

DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything

IMPORTS	

AddressString,
ISDN-AddressString,
LCSClientExternalID,
LCSClientInternalID
FROM MAP-CommonDataTypes { itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18)  version18 (18) }
-- from TS 29.002 [214]

PositionMethodFailure-Diagnostic,
UnauthorizedLCSClient-Diagnostic
FROM MAP-ER-DataTypes { itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-ER-DataTypes (17)  version18 (18)}
-- from TS 29.002 [214]

ObjectInstance	
FROM CMIP-1 {joint-iso-itu-t ms (9) cmip (1) modules (0) protocol (3)}
-- from Rec. X.711 [304]

ManagementExtension
FROM Attribute-ASN1Module {joint-iso-itu-t ms (9) smi (3) part2 (2) asn1Module (2) 1}
-- from Rec. X.721 [305]

AE-title
FROM ACSE-1 {joint-iso-itu-t association-control (2) modules (0) apdus (0) version1 (1) };
-- Note that the syntax of AE-title to be used is from 
-- ITU-T Rec. X.227[306) / ISO 8650 corrigendum and not "ANY"

--
--  Generic Data Types
--

BCDDirectoryNumber		::= OCTET STRING
--
-- This type contains the binary coded decimal representation of
-- a directory number e.g. calling/called/connected/translated number.
-- The encoding of the octet string is in accordance with the
-- the elements "Calling party BCD number", "Called party BCD number"
-- and "Connected number" defined in TS 24.008 [208].
-- This encoding includes type of number and number plan information
-- together with a BCD encoded digit string.
-- It may also contain both a presentation and screening indicator
-- (octet 3a).
-- For the avoidance of doubt, this field does not include 
	-- octets 1 and 2, the element name and length, as this would be 
-- redundant.
--

CallDuration 			::= INTEGER
--
-- The call duration is counted in seconds. 
-- For successful calls /sessions / PDP contexts, this is the chargeable duration.
-- For call attempts this is the call holding time.
-- 

CalledNumber			::= BCDDirectoryNumber


CallingNumber	::= BCDDirectoryNumber

CellId	::= OCTET STRING (SIZE(2))
--
-- Coded according to TS 24.008 [208]	
--

ChargeIndicator			::= INTEGER
{
	noCharge			(0),
	charge				(1)
}

CauseForRecClosing	::= INTEGER
--
-- Cause codes 0 to 15 are defined 'CauseForTerm' (cause for termination)
-- There is no direct correlation between these two types.
--
-- LCS related causes belong to the MAP error causes acc. TS 29.002 [214]
--
-- In PGW-CDR and SGW-CDR the value servingNodeChange is used for partial record
-- generation due to Serving Node Address list Overflow
-- In SGSN servingNodeChange indicates the SGSN change
-- 
-- sWGChange value is used in both the S-GW, TWAG and ePDG for inter serving node change
-- 
{
	normalRelease					(0),
	partialRecord					(1),
	abnormalRelease					(4),
	cAMELInitCallRelease			(5),
	volumeLimit						(16),
	timeLimit						(17),
	servingNodeChange				(18),
	maxChangeCond					(19),
	managementIntervention			(20),
	intraSGSNIntersystemChange		(21),
	rATChange						(22),
	mSTimeZoneChange				(23),
	sGSNPLMNIDChange 				(24),
	sGWChange						(25),
	aPNAMBRChange					(26),
	mOExceptionDataCounterReceipt	(27),
	unauthorizedRequestingNetwork	(52),
	unauthorizedLCSClient			(53),
	positionMethodFailure			(54),
	unknownOrUnreachableLCSClient	(58),
	listofDownstreamNodeChange		(59)
}

CauseForTerm			::= INTEGER
--
-- Cause codes from 16 up to 31 are defined as 'CauseForRecClosing'
-- (cause for record closing).
-- There is no direct correlation between these two types.
--
-- LCS related causes belong to the MAP error causes acc. TS 29.002 [214].
--
{
	normalRelease						(0),
	partialRecord						(1),
	partialRecordCallReestablishment	(2),
	unsuccessfulCallAttempt				(3),
	abnormalRelease						(4),
	cAMELInitCallRelease				(5),
	unauthorizedRequestingNetwork		(52),
	unauthorizedLCSClient				(53),
	positionMethodFailure				(54),
	unknownOrUnreachableLCSClient		(58)
}

ChargingID	::= INTEGER (0..4294967295)
--
-- Generated in P-GW, part of IP-CAN bearer
-- 0..4294967295 is equivalent to 0..2**32-1
--

CivicAddressInformation		::= OCTET STRING
--
-- as defined in subclause 3.1 of IETF RFC 4776 [409] excluding the first 3 octets.
--

CNIPMulticastDistribution		::= ENUMERATED
{
	nO-IP-MULTICAST				(0),	
	iP-MULTICAST				(1)
}

DataVolumeOctets		::= INTEGER
--
-- The volume of data transferred in octets.
--

DynamicAddressFlag	::= BOOLEAN


Diagnostics						::= CHOICE
{
	gsm0408Cause								[0] INTEGER,
	-- See TS 24.008 [208]	
	gsm0902MapErrorValue						[1] INTEGER,
	-- 
	-- Note: The value to be stored here corresponds to the local values defined in the MAP-Errors 
	-- and MAP-DialogueInformation modules, for full details see TS 29.002 [214].
	-- 
	itu-tQ767Cause							[2] INTEGER,
	-- See Q.767 [309]
	networkSpecificCause						[3] ManagementExtension,
	-- To be defined by network operator
	manufacturerSpecificCause				[4] ManagementExtension,
	-- To be defined by manufacturer
	-- May be used for CHF generated diagnostics
	positionMethodFailureCause				[5] PositionMethodFailure-Diagnostic,
	-- See TS 29.002 [214]
	unauthorizedLCSClientCause				[6] UnauthorizedLCSClient-Diagnostic,
	-- See TS 29.002 [214] 
	diameterResultCodeAndExperimentalResult	[7] INTEGER
	-- See TS 29.338 [230], TS 29.337 [231], TS 29.128 [244]
-- May be used for Nchf received diagnostics
}

DiameterIdentity		::= OCTET STRING

EnhancedDiagnostics					::= SEQUENCE
{
	rANNASCause						[0] SEQUENCE OF RANNASCause
}

GSNAddress	::= IPAddress

InvolvedParty ::= CHOICE 
{
	sIP-URI		[0] GraphicString, -- refer to rfc3261 [401]
	tEL-URI		[1] GraphicString,	-- refer to rfc3966 [402]
	uRN			[2] GraphicString,	-- refer to rfc5031 [407]
	iSDN-E164 	[3] GraphicString,	-- refer to ITU-T Recommendation E.164[308]
	externalId 	[4] UTF8String		-- refer to clause 19.7.2 TS 23.003 [200]

}

IPAddress	::= CHOICE
{
	iPBinaryAddress				IPBinaryAddress,
	iPTextRepresentedAddress	IPTextRepresentedAddress
}

IPBinaryAddress	::= CHOICE
{
	iPBinV4Address			[0] IPBinV4Address,
	iPBinV6Address			    IPBinV6AddressWithOrWithoutPrefixLength
}

IPBinV4Address	::= OCTET STRING (SIZE(4))

IPBinV6Address	::= OCTET STRING (SIZE(16))

IPBinV6AddressWithOrWithoutPrefixLength ::= CHOICE
{ 
	iPBinV6Address				[1] IPBinV6Address,
	iPBinV6AddressWithPrefix	[4] IPBinV6AddressWithPrefixLength
}

IPBinV6AddressWithPrefixLength ::= SEQUENCE
{
	iPBinV6Address				IPBinV6Address,
	pDPAddressPrefixLength		PDPAddressPrefixLength DEFAULT 64
}

IPTextRepresentedAddress	::= CHOICE
{	--
	-- IPv4 address are formatted in the "dotted decimal" notation according to IETF RFC 1166 [411].
	-- IPv6 address are formatted according to clause 4 of IETF RFC 5952 [412]. The mixed IPv4 IPv6
	-- notation according to clause 5 of IETF RFC 5952 [412] is not used.
	-- IPv6 address prefix are formatted in the "/" notation and according to clause 4 of 
	-- IETF RFC 5952 [412].
	--
	iPTextV4Address		[2] IA5String (SIZE(7..15)),
	iPTextV6Address		[3] IA5String (SIZE(15..45))
}

LCSCause				::= OCTET STRING (SIZE(1))
--
-- See LCS Cause Value, TS 49.031 [227]
--

LCSClientIdentity 		::= SEQUENCE 
{
	lcsClientExternalID	[0] LCSClientExternalID OPTIONAL,
	lcsClientDialedByMS	[1] AddressString OPTIONAL,
	lcsClientInternalID	[2] LCSClientInternalID OPTIONAL   
}

LCSQoSInfo				::= OCTET STRING (SIZE(4))
--
-- See LCS QoS IE, TS 49.031 [227]
--

LevelOfCAMELService		::= BIT STRING
{
	basic						(0),
	callDurationSupervision		(1),
	onlineCharging				(2)
}

LocalSequenceNumber ::= INTEGER (0..4294967295)
--
-- Sequence number of the record in this node
-- 0.. 4294967295 is equivalent to 0..2**32-1, unsigned integer in four octets
--

LocationAreaAndCell		::= SEQUENCE
{
	locationAreaCode	[0] LocationAreaCode,
	cellId				[1] CellId,
	mCC-MNC				[2] MCC-MNC OPTIONAL
}

LocationAreaCode		::= OCTET STRING (SIZE(2))
--
-- See TS 24.008 [208]
--

ManagementExtensions	::= SET OF ManagementExtension

MBMS2G3GIndicator		::= ENUMERATED
{
	twoG				(0),	-- For GERAN access only
	threeG			(1),	-- For UTRAN access only
	twoG-AND-threeG	(2) 	-- For both UTRAN and GERAN access
}

MBMSInformation			::= SET
{
	tMGI							[1] TMGI OPTIONAL,
	mBMSSessionIdentity			[2] MBMSSessionIdentity OPTIONAL,
	mBMSServiceType				[3] MBMSServiceType OPTIONAL,
	mBMSUserServiceType			[4] MBMSUserServiceType OPTIONAL, -- only supported in the BM-SC
	mBMS2G3GIndicator			[5] MBMS2G3GIndicator OPTIONAL,
	fileRepairSupported			[6] BOOLEAN OPTIONAL,			  -- only supported in the BM-SC
	rAI							[7] RoutingAreaCode OPTIONAL,	  -- only supported in the BM-SC
	mBMSServiceArea				[8] MBMSServiceArea OPTIONAL,
	requiredMBMSBearerCaps		[9] RequiredMBMSBearerCapabilities OPTIONAL,
	mBMSGWAddress				[10] GSNAddress OPTIONAL,
	cNIPMulticastDistribution	[11] CNIPMulticastDistribution OPTIONAL,
	mBMSDataTransferStart		[12] MBMSTime OPTIONAL,
	mBMSDataTransferStop			[13] MBMSTime OPTIONAL
}

MBMSServiceArea		::= OCTET STRING

MBMSServiceType		::= ENUMERATED
{
	mULTICAST		(0),
	bROADCAST		(1)
}

MBMSSessionIdentity		::= OCTET STRING (SIZE (1))
--
-- This octet string is a 1:1 copy of the contents of the MBMS-Session-Identity
-- AVP specified in TS 29.061 [82]
--

MBMSTime	::= OCTET STRING (SIZE (8))
--
-- This value indicates the time in seconds relative to 00:00:00 on 1 January 1900 (calculated as
-- continuous time without leap seconds and traceable to a common time reference) where binary
-- encoding of the integer part is in the first 32 bits and binary encoding of the fraction part in
-- the last 32 bits. The fraction part is expressed with a granularity of 1 /2**32 second as
-- specified in TS 29.061 [82].
--

MBMSUserServiceType		::= ENUMERATED
{
	dOWNLOAD		(0),
	sTREAMING	(1)
}

MCC-MNC		::= OCTET STRING (SIZE(3))
--
-- See TS 24.008 [208]
--

MessageClass		::= ENUMERATED
{
	personal			(0), 
	advertisement		(1), 
	information-service	(2),
	auto				(3)
}

MessageReference		::= OCTET STRING
--
-- The default value shall be one octet set to 0
--

MSCAddress		::= AddressString

MscNo					::= ISDN-AddressString
--
-- See TS 23.003 [200]
--

MSISDN					::= ISDN-AddressString 
-- 
-- See TS 23.003 [200]
--

MSTimeZone	::= OCTET STRING (SIZE (2))
--
-- 1. Octet: Time Zone and 2. Octet: Daylight saving time, see TS 29.060 [215]
--

NodeID		::= IA5String (SIZE(1..20))

NodeAddress ::= CHOICE 
{
	iPAddress 	[0] IPAddress,
	domainName	[1] GraphicString
}

PDPAddressPrefixLength		::=INTEGER (1..64)
--
-- This is an integer indicating the length of the PDP/PDN IPv6 address prefix
-- and the default value is 64 bits.
--

PDPAddress		::= CHOICE
{
	iPAddress				[0] IPAddress
--	eTSIAddress				[1] ETSIAddress
--								has only been used in earlier releases for X.121 format
}

PLMN-Id		::= OCTET STRING (SIZE (3))
--
-- This is in the same format as octets 2, 3 and 4 of the Routing Area Identity (RAI) IE specified
-- in TS 29.060 [215]
--

PositioningData	::= OCTET STRING (SIZE(1..33))
--
-- See Positioning Data IE (octet 3..n), TS 49.031 [227]
--

PriorityType	::= ENUMERATED
{
	low			(0),
	normal		(1),
	high		(2)
}

RANNASCause				::=	OCTET STRING
-- This octet string is a 1:1 copy of the contents (i.e. starting with octet 5)
-- of the "RAN/NAS Cause" information element specified in TS 29.274 [223].

RATType		::= INTEGER (0..255)
--
--This integer is 1:1 copy of the RAT type value as defined in TS 29.061 [215].
--

RecordingEntity 		::= AddressString 

RecordType 	::= INTEGER 
-- 
--	Record values 0..17 and 87,89  are CS specific. The contents are defined in TS 32.250 [10]
--
{
	moCallRecord			(0),
	mtCallRecord			(1),
	roamingRecord			(2),
	incGatewayRecord		(3),
	outGatewayRecord		(4),
	transitCallRecord		(5),
	moSMSRecord				(6),
	mtSMSRecord				(7),
	moSMSIWRecord			(8),
	mtSMSGWRecord			(9),
	ssActionRecord			(10),
	hlrIntRecord			(11),
	locUpdateHLRRecord		(12),
	locUpdateVLRRecord		(13),
	commonEquipRecord		(14),
	moTraceRecord			(15),	-- used in earlier releases
	mtTraceRecord			(16),	-- used in earlier releases
	termCAMELRecord			(17),
--
--	Record values 18..22 are GPRS specific. The contents are defined in TS 32.251 [11]
--
	sgsnPDPRecord			(18),
	sgsnMMRecord			(20),
	sgsnSMORecord			(21),	-- also MME UE originated SMS record
	sgsnSMTRecord			(22),	-- also MME UE terminated SMS record
-- 
--  Record values 23..25 are CS-LCS specific. The contents are defined in TS 32.250 [10]
--
	mtLCSRecord				(23),
	moLCSRecord				(24),
	niLCSRecord				(25),
-- 
--  Record values 26..28 are GPRS-LCS specific. The contents are defined in TS 32.251 [11]
--
	sgsnMTLCSRecord			(26),
	sgsnMOLCSRecord			(27),
	sgsnNILCSRecord			(28),
--
--  Record values 30..62 are MMS specific. The contents are defined in TS 32.270 [30]
--
	mMO1SRecord				(30),
	mMO4FRqRecord			(31),
	mMO4FRsRecord			(32),
	mMO4DRecord				(33),
	mMO1DRecord				(34),
	mMO4RRecord				(35),
	mMO1RRecord				(36),
	mMOMDRecord				(37),
	mMR4FRecord				(38),
	mMR1NRqRecord			(39),
	mMR1NRsRecord			(40),
	mMR1RtRecord			(41),
	mMR1AFRecord			(42),
	mMR4DRqRecord			(43),
	mMR4DRsRecord			(44),
	mMR1RRRecord			(45),
	mMR4RRqRecord			(46),
	mMR4RRsRecord			(47),
	mMRMDRecord				(48),
	mMFRecord				(49),
	mMBx1SRecord			(50),
	mMBx1VRecord			(51),
	mMBx1URecord			(52),
	mMBx1DRecord			(53),
	mM7SRecord				(54),
	mM7DRqRecord			(55),
	mM7DRsRecord			(56),
	mM7CRecord				(57),
	mM7RRecord				(58),
	mM7DRRqRecord			(59),
	mM7DRRsRecord			(60),
	mM7RRqRecord			(61),
	mM7RRsRecord			(62),
--
--  Record values 63..70, 82, 89..91 are IMS specific.
--  The contents are defined in TS 32.260 [20]
--
	sCSCFRecord				(63),
	pCSCFRecord				(64),
	iCSCFRecord				(65),
	mRFCRecord				(66),
	mGCFRecord				(67),
	bGCFRecord				(68),
	aSRecord				(69),
	eCSCFRecord				(70),
	iBCFRecord				(82),
	tRFRecord				(89),
	tFRecord				(90),
aTCFRecord				(91),
--
--  Record values 71..75 are LCS specific. The contents are defined in TS 32.271 [31]
--
	lCSGMORecord			(71),
	lCSRGMTRecord			(72),
	lCSHGMTRecord			(73),
	lCSVGMTRecord			(74),
	lCSGNIRecord			(75),
--
--  Record values 76..79,86 are MBMS specific.
--  The contents are defined in TS 32.251 [11] and TS 32.273 [33]
--
--  Record values 76,77 and 86 are MBMS bearer context specific
--
	sgsnMBMSRecord			(76),
	ggsnMBMSRecord			(77), 
	gwMBMSRecord			(86),
--
--  Record values 78 and 79 are MBMS service specific and defined in TS 32.273 [33]
--
	sUBBMSCRecord			(78),
	cONTENTBMSCRecord		(79),
--
--  Record Values 80..81 are PoC specific. The contents are defined in TS 32.272 [32]
--
	pPFRecord				(80),
	cPFRecord				(81),
--  
--	Record values 84,85 and 92,95,96, 97 are EPC specific.
--  The contents are defined in TS 32.251 [11]
--
	sGWRecord				(84),
	pGWRecord				(85),
	tDFRecord				(92),
	iPERecord				(95),
	ePDGRecord				(96),
	tWAGRecord				(97),
--
--  Record Value 83 is MMTel specific. The contents are defined in TS 32.275 [35]
--
	mMTelRecord				(83),
--
--  Record value  87,88 and 89 are CS specific. The contents are defined in TS 32.250 [10]
--
	mSCsRVCCRecord			(87),
	mMTRFRecord				(88),
	iCSRegisterRecord		(99),
--
--  Record values 93 and 94 are SMS specific. The contents are defined in TS 32.274 [34]
--
	sCSMORecord				(93),
	sCSMTRecord				(94),
--
--  Record values 100, 101 and 102 are ProSe specific. The contents are defined in TS 32.277 [36]
--
	pFDDRecord				(100),
	pFEDRecord				(101),
	pFDCRecord				(102),
--
--  Record values103 and 104 are Monitoring Event specific. The contents are defined in TS 
--	32.278 [38]
--
	mECORecord				(103),
	mERERecord				(104),
--
--  Record values 105 to 106 are CP data transfer specific. The contents are defined in TS 
--	32.253 [13]
--
	cPDTSCERecord			(105),
	cPDTSNNRecord			(106), --
--  Record values 110 to 113 are SMS specific. The contents are defined in TS 
--	32.274 [34]
--
	sCDVTT4Record			(110),
	sCSMOT4Record			(111),
	iSMSMORecord			(112),
	iSMSMTRecord			(113),
--  
--  Record values 120 are Exposure Function API specific. The contents are defined in TS 
--	32.254 [14]
--
	eASCERecord				(120),
--
--  Record values from 200 are specific to Charging Function domain 
--
	chargingFunctionRecord		(200)
--


}

RequiredMBMSBearerCapabilities		::= OCTET STRING (SIZE (3..14))
--
-- This octet string is a 1:1 copy of the contents (i.e. starting with octet 5) of the 
-- "Quality of service Profile" information element specified in TS 29.060 [75].
--

RoutingAreaCode	::= OCTET STRING (SIZE(1))
--
-- See TS 24.008 [208]	
--

SCSASAddress		::= SET
--
-- 
--
{
	sCSAddress		[1] IPAddress,
	sCSRealm		[2] DiameterIdentity
}

Session-Id	::= GraphicString
--
-- rfc3261 [401]: example for SIP CALL-ID: f81d4fae-7dec-11d0-a765-00a0c91e6bf6@foo.bar.com
--

ServiceContextID		::= UTF8String

ServiceSpecificInfo  ::=  SEQUENCE
{
	serviceSpecificData		[0] GraphicString OPTIONAL, 
	serviceSpecificType		[1] INTEGER OPTIONAL
}

SMSResult					::= Diagnostics

SmsTpDestinationNumber ::= OCTET STRING
--
-- This type contains the binary coded decimal representation of
-- the SMS address field the encoding of the octet string is in 
-- accordance with the definition of address fields in TS 23.040 [201].
-- This encoding includes type of number and numbering plan indication
-- together with the address value range.
--

SubscriberEquipmentNumber	::= SET
--
-- If SubscriberEquipmentType is set to IMEISV and IMEI is received, the number of digits is 15.
--
{
	subscriberEquipmentNumberType	[0]	SubscriberEquipmentType,
	subscriberEquipmentNumberData	[1]	OCTET STRING
}

SubscriberEquipmentType	::= ENUMERATED
--
-- It should be noted that depending on the services, not all equipment types are applicable.
-- For IMS equipment types 0 and 3 are applicable.
-- In 5GS, for PEI defined as: 
--        - IMEI or IMEISV, iMEISV type is used and the data is per TS 23.003 [200] format.
--        - MAC address, mAC type is used, and the data is converted from JSON format of the PEI 
--          described in TS 29.571 [249].
--        - EUI-64, uEI64 type is used, and the data is converted from JSON format of the PEI 
--          described in TS 29.571 [249].
{
	iMEISV			(0),
	mAC				(1),
	eUI64			(2),
	modifiedEUI64	(3)
}

SubscriptionID	::= SET
--
-- See TS 23.003 [200] and TS 29.571 [249]
--
{
	subscriptionIDType	[0]	SubscriptionIDType,
	subscriptionIDData	[1]	UTF8String
}

SubscriptionIDType	::= ENUMERATED
{
	eND-USER-E164		(0),
	eND-USER-IMSI		(1),
	eND-USER-SIP-URI		(2),
	eND-USER-NAI			(3),
	eND-USER-PRIVATE		(4)

--
-- eND-USER-NAI can be used for externalIdentifier.
-- eND-USER-IMSI can be used for 5G BRG or 5G CRG.
-- eND-USER-NAI can be used for GLI or GCI for wireline access network scenarios
-- NAI format for GCI and GLI is specified in 28.15.5 and 28.15.6 of TS 23.003 [200]. 
--

}

SystemType	::= ENUMERATED
	--
	--  "unknown" is not to be used in PS domain.
	--
{	
	unknown				(0),
	iuUTRAN				(1),
	gERAN				(2)
}

ThreeGPPPSDataOffStatus		::= ENUMERATED
{
	active		    (0),
	inactive		(1)
}


TimeStamp	::= OCTET STRING (SIZE(9))
--
-- The contents of this field are a compact form of the UTCTime format
-- containing local time plus an offset to universal time. Binary coded
-- decimal encoding is employed for the digits to reduce the storage and
-- transmission overhead
-- e.g. YYMMDDhhmmssShhmm
-- where
-- YY 	= 	Year 00 to 99		BCD encoded
-- MM 	= 	Month 01 to 12 		BCD encoded
-- DD	=	Day 01 to 31		BCD encoded
-- hh	=	hour 00 to 23		BCD encoded
-- mm	=	minute 00 to 59		BCD encoded
-- ss	=	second 00 to 59		BCD encoded
-- S	=	Sign 0 = "+", "-"	ASCII encoded
-- hh	=	hour 00 to 23		BCD encoded
-- mm	=	minute 00 to 59		BCD encoded
--

TMGI		::= OCTET STRING
--
-- This  octet string is a 1:1 copy of the contents (i.e. starting with octet 4)
-- of the "TMGI" information element specified in TS 29.060 [75].
--

.#END

5.2.2	Bearer level CDR definitions
5.2.2.0	General
This clause contains the syntax definitions of the CDRs on the bearer level. This comprises the CDR types from the Circuit Switched (CS) domain (TS 32.250 [10]) and the Packet Switched (PS) domain, i.e. GPRS (TS 32.251 [11]).
5.2.2.1	CS domain CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.250 [10].
.$CSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) csChargingDataTypes (1) asn1Module (0) version2 (1)}  DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything

IMPORTS	

AE-title,
BCDDirectoryNumber,
CallDuration,
CalledNumber,
CallingNumber,
CauseForTerm,
CellId,
ChargeIndicator,
Diagnostics,
LCSCause,
LCSClientIdentity,
LCSQoSInfo,
LevelOfCAMELService,
LocationAreaAndCell,
LocationAreaCode,
ManagementExtensions,
MCC-MNC,
MessageReference,
MSCAddress,
MscNo,
MSISDN,
NodeAddress,
ObjectInstance,
PositioningData,
RecordingEntity,
RecordType,
SMSResult,
SmsTpDestinationNumber,
SystemType,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}  

BearerServiceCode
FROM MAP-BS-Code {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-BS-Code (20)  version18 (18) }
-- from TS 29.002 [214]

TeleserviceCode
FROM MAP-TS-Code {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-TS-Code (19)  version18 (18) }
-- from TS 29.002 [214]

SS-Code
FROM MAP-SS-Code { itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-SS-Code (15)  version18 (18) }
-- from TS 29.002 [214]

MOLR-Type
FROM SS-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Access (2) modules (3) ss-DataTypes (2)  version14 (14)}
-- from TS 24.080 [209] 

DefaultCallHandling,
DefaultSMS-Handling, 
NotificationToMSUser,
ServiceKey 
FROM MAP-MS-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0)
gsm-Network (1) modules (3) map-MS-DataTypes (11)  version18 (18) }
-- from TS 29.002 [214]

CallReferenceNumber,
NumberOfForwarding
FROM MAP-CH-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CH-DataTypes (13)  version18 (18) }
-- from TS 29.002 [214]

AddressString,
BasicServiceCode,
IMEI,
IMSI,
ISDN-AddressString
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18)  version18 (18) }
-- from TS 29.002 [214]

Ext-GeographicalInformation, 
LCSClientType, 
LCS-Priority, 
LocationType
FROM MAP-LCS-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-LCS-DataTypes (25)  version18 (18) }
-- from TS 29.002 [214]

IMS-Charging-Identifier, 
InterOperatorIdentifierList,
TransitIOILists
FROM IMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) imsChargingDataTypes (4) asn1Module (0) version2 (1)}

BasicService
FROM Basic-Service-Elements	{itu-t(0) identified-organization (4) etsi (0) 196 basic-service-elements (8) }
-- from "Digital Subscriber Signalling System No. one (DSS1) protocol" ETS 300 196 [310]

DestinationRoutingAddress
FROM CAP-datatypes { itu-t(0) identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) cap-datatypes (52) version8 (7) }
-- from TS 29.078 [217]

;

--
--  CS CALL AND EVENT RECORDS
--

CSRecord	::= CHOICE 
--
-- Record values 0..21 are circuit switch specific
--
{
	moCallRecord				[0] MOCallRecord,
	mtCallRecord				[1] MTCallRecord,
	roamingRecord			[2] RoamingRecord,
	incGatewayRecord			[3] IncGatewayRecord,
	outGatewayRecord			[4] OutGatewayRecord,
	transitRecord			[5] TransitCallRecord,
	moSMSRecord				[6] MOSMSRecord,
	mtSMSRecord				[7] MTSMSRecord,
	moSMSIWRecord			[8] MOSMSIWRecord,
	mtSMSGWRecord			[9] MTSMSGWRecord,
	ssActionRecord			[10] SSActionRecord,
	hlrIntRecord				[11] HLRIntRecord,
	locUpdateHLRRecord		[12] LocUpdateHLRRecord,
	locUpdateVLRRecord		[13] LocUpdateVLRRecord,
	commonEquipRecord		[14] CommonEquipRecord,
	recTypeExtensions		[15] ManagementExtensions,
	termCAMELRecord			[16] TermCAMELRecord,
	mtLCSRecord				[17] MTLCSRecord,
	moLCSRecord				[18] MOLCSRecord,
	niLCSRecord				[19] NILCSRecord,
	mSCsRVCCRecord			[20] MSCsRVCCRecord,
	mMTRFRecord				[21] MTRFRecord,
	iCSRegisterRecord		[22] ICSregisterRecord
}

MOCallRecord	::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[1] IMSI OPTIONAL,
	servedIMEI					[2] IMEI OPTIONAL,
	servedMSISDN					[3] MSISDN OPTIONAL,
	callingNumber				[4] CallingNumber OPTIONAL,
	calledNumber					[5] CalledNumber OPTIONAL,
	translatedNumber				[6] TranslatedNumber OPTIONAL,
	connectedNumber				[7] ConnectedNumber OPTIONAL,
	roamingNumber				[8] RoamingNumber OPTIONAL,
	recordingEntity				[9] RecordingEntity,
	mscIncomingTKGP				[10] TrunkGroup OPTIONAL,
	mscOutgoingTKGP				[11] TrunkGroup OPTIONAL,
	location						[12] LocationAreaAndCell OPTIONAL,
	changeOfLocation				[13] SEQUENCE OF LocationChange OPTIONAL,
	basicService					[14] BasicServiceCode OPTIONAL,
	transparencyIndicator		[15] TransparencyInd OPTIONAL,
	changeOfService				[16] SEQUENCE OF ChangeOfService OPTIONAL,
	supplServicesUsed			[17] SEQUENCE OF SuppServiceUsed OPTIONAL,
	aocParameters				[18] AOCParameters OPTIONAL,
	changeOfAOCParms				[19] SEQUENCE OF AOCParmChange OPTIONAL,
	msClassmark					[20] Classmark OPTIONAL,
	changeOfClassmark			[21] ChangeOfClassmark OPTIONAL,
	seizureTime					[22] TimeStamp OPTIONAL,
	answerTime					[23] TimeStamp OPTIONAL,
	releaseTime					[24] TimeStamp OPTIONAL,
	callDuration					[25] CallDuration,
	dataVolume					[26] DataVolume OPTIONAL,
	radioChanRequested			[27] RadioChanRequested OPTIONAL,
	radioChanUsed				[28] TrafficChannel OPTIONAL,
	changeOfRadioChan			[29] ChangeOfRadioChannel OPTIONAL,
	causeForTerm					[30] CauseForTerm,
	diagnostics					[31] Diagnostics OPTIONAL,
	callReference				[32] CallReferenceNumber,
	sequenceNumber				[33] INTEGER OPTIONAL,
	additionalChgInfo			[34] AdditionalChgInfo OPTIONAL,
	recordExtensions				[35] ManagementExtensions OPTIONAL,
	gsm-SCFAddress				[36] Gsm-SCFAddress OPTIONAL,
	serviceKey					[37] ServiceKey OPTIONAL,
	networkCallReference			[38] NetworkCallReference OPTIONAL,
	mSCAddress					[39] MSCAddress OPTIONAL,
	cAMELInitCFIndicator			[40] CAMELInitCFIndicator OPTIONAL,
	defaultCallHandling			[41] DefaultCallHandling OPTIONAL,
	hSCSDChanRequested			[42] NumOfHSCSDChanRequested OPTIONAL,
	hSCSDChanAllocated			[43] NumOfHSCSDChanAllocated OPTIONAL,
	changeOfHSCSDParms			[44] SEQUENCE OF HSCSDParmsChange OPTIONAL,
	fnur							[45] Fnur OPTIONAL,
	aiurRequested				[46] AiurRequested OPTIONAL,
	chanCodingsAcceptable		[47] SEQUENCE OF ChannelCoding OPTIONAL,
	chanCodingUsed				[48] ChannelCoding OPTIONAL,
	speechVersionSupported		[49] SpeechVersionIdentifier OPTIONAL,
	speechVersionUsed			[50] SpeechVersionIdentifier OPTIONAL,
	numberOfDPEncountered		[51] INTEGER OPTIONAL,
	levelOfCAMELService			[52] LevelOfCAMELService OPTIONAL,
	freeFormatData				[53] FreeFormatData OPTIONAL,
	cAMELCallLegInformation		[54] SEQUENCE OF CAMELInformation OPTIONAL,
	freeFormatDataAppend			[55] BOOLEAN OPTIONAL,
	defaultCallHandling-2		[56] DefaultCallHandling OPTIONAL,
	gsm-SCFAddress-2				[57] Gsm-SCFAddress OPTIONAL,
	serviceKey-2					[58] ServiceKey OPTIONAL,
	freeFormatData-2				[59] FreeFormatData OPTIONAL,
	freeFormatDataAppend-2		[60] BOOLEAN OPTIONAL,
	systemType					[61] SystemType OPTIONAL,
	rateIndication				[62] RateIndication OPTIONAL,
	locationRoutNum				[63] LocationRoutingNumber OPTIONAL,
	lrnSoInd						[64] LocationRoutingNumberSourceIndicator OPTIONAL,
	lrnQuryStatus				[65] LocationRoutingNumberQueryStatus OPTIONAL,
	jIPPara						[66] JurisdictionInformationParameter OPTIONAL,
	jIPSoInd						[67] JurisdictionInformationParameterSourceIndicator OPTIONAL,
	jIPQuryStatus				[68] JurisdictionInformationParameterQueryStatus OPTIONAL,
	partialRecordType			[69] PartialRecordType OPTIONAL,
	guaranteedBitRate			[70] GuaranteedBitRate OPTIONAL,
	maximumBitRate				[71] MaximumBitRate OPTIONAL,
	redial						[72] BOOLEAN OPTIONAL,	-- set indicates redial attempt
	reasonForServiceChange		[73] ReasonForServiceChange OPTIONAL,
	serviceChangeInitiator		[74] BOOLEAN OPTIONAL,
	iCSI2ActiveFlag				[75] NULL OPTIONAL,
	iMS-Charging-Identifier		[76] IMS-Charging-Identifier OPTIONAL,
	privateUserID				[77] GraphicString OPTIONAL
}

MTCallRecord			::= SET
{
	recordType				[0] RecordType,
	servedIMSI				[1] IMSI,
	servedIMEI				[2] IMEI OPTIONAL,
	servedMSISDN				[3] CalledNumber OPTIONAL,
	callingNumber			[4] CallingNumber OPTIONAL,
	connectedNumber			[5] ConnectedNumber OPTIONAL,
	recordingEntity			[6] RecordingEntity,
	mscIncomingTKGP			[7] TrunkGroup OPTIONAL,
	mscOutgoingTKGP			[8] TrunkGroup OPTIONAL,
	location					[9] LocationAreaAndCell OPTIONAL,
	changeOfLocation			[10] SEQUENCE OF LocationChange OPTIONAL,
	basicService				[11] BasicServiceCode OPTIONAL,
	transparencyIndicator	[12] TransparencyInd OPTIONAL,
	changeOfService			[13] SEQUENCE OF ChangeOfService OPTIONAL,
	supplServicesUsed		[14] SEQUENCE OF SuppServiceUsed OPTIONAL,
	aocParameters			[15] AOCParameters OPTIONAL,
	changeOfAOCParms			[16] SEQUENCE OF AOCParmChange OPTIONAL,
	msClassmark				[17] Classmark OPTIONAL,
	changeOfClassmark		[18] ChangeOfClassmark OPTIONAL,
	seizureTime				[19] TimeStamp OPTIONAL,
	answerTime				[20] TimeStamp OPTIONAL,
	releaseTime				[21] TimeStamp OPTIONAL,
	callDuration				[22] CallDuration,
	dataVolume				[23] DataVolume OPTIONAL,
	radioChanRequested		[24] RadioChanRequested OPTIONAL,
	radioChanUsed			[25] TrafficChannel OPTIONAL,
	changeOfRadioChan		[26] ChangeOfRadioChannel OPTIONAL,
	causeForTerm				[27] CauseForTerm,
	diagnostics				[28] Diagnostics OPTIONAL,
	callReference			[29] CallReferenceNumber,
	sequenceNumber			[30] INTEGER OPTIONAL,
	additionalChgInfo		[31] AdditionalChgInfo OPTIONAL,
	recordExtensions			[32] ManagementExtensions OPTIONAL,
	networkCallReference		[33] NetworkCallReference OPTIONAL,
	mSCAddress				[34] MSCAddress OPTIONAL,
	hSCSDChanRequested		[35] NumOfHSCSDChanRequested OPTIONAL,
	hSCSDChanAllocated		[36] NumOfHSCSDChanAllocated OPTIONAL,
	changeOfHSCSDParms		[37] SEQUENCE OF HSCSDParmsChange OPTIONAL,
	fnur						[38] Fnur OPTIONAL,
	aiurRequested			[39] AiurRequested OPTIONAL,
	chanCodingsAcceptable	[40] SEQUENCE OF ChannelCoding OPTIONAL,
	chanCodingUsed			[41] ChannelCoding OPTIONAL,
	speechVersionSupported	[42] SpeechVersionIdentifier OPTIONAL,
	speechVersionUsed		[43] SpeechVersionIdentifier OPTIONAL,
	gsm-SCFAddress			[44] Gsm-SCFAddress OPTIONAL,
	serviceKey				[45] ServiceKey OPTIONAL,
	systemType				[46] SystemType OPTIONAL,
	rateIndication			[47] RateIndication OPTIONAL,
	locationRoutNum			[48] LocationRoutingNumber OPTIONAL,
	lrnSoInd					[49] LocationRoutingNumberSourceIndicator OPTIONAL,
	lrnQuryStatus			[50] LocationRoutingNumberQueryStatus OPTIONAL,
	jIPPara					[51] JurisdictionInformationParameter OPTIONAL,
	jIPSoInd					[52] JurisdictionInformationParameterSourceIndicator OPTIONAL,
	jIPQuryStatus			[53] JurisdictionInformationParameterQueryStatus OPTIONAL,
	partialRecordType		[54] PartialRecordType OPTIONAL,
	guaranteedBitRate		[55] GuaranteedBitRate OPTIONAL,
	maximumBitRate			[56] MaximumBitRate OPTIONAL,
	reasonForServiceChange	[57] ReasonForServiceChange OPTIONAL,
	serviceChangeInitiator	[58] BOOLEAN OPTIONAL,
	iCSI2ActiveFlag			[59] NULL OPTIONAL,
	iMS-Charging-Identifier	[60] IMS-Charging-Identifier OPTIONAL,
	privateUserID			[61] GraphicString OPTIONAL
}

RoamingRecord			::= SET
{
	recordType				[0] RecordType,
	servedIMSI				[1] IMSI,
	servedMSISDN				[2] MSISDN OPTIONAL,
	callingNumber			[3] CallingNumber OPTIONAL,
	roamingNumber			[4] RoamingNumber OPTIONAL,
	recordingEntity			[5] RecordingEntity,
	mscIncomingTKGP			[6] TrunkGroup OPTIONAL,
	mscOutgoingTKGP			[7] TrunkGroup OPTIONAL,
	basicService				[8] BasicServiceCode OPTIONAL,
	transparencyIndicator	[9] TransparencyInd OPTIONAL,
	changeOfService			[10] SEQUENCE OF ChangeOfService OPTIONAL,
	supplServicesUsed		[11] SEQUENCE OF  SuppServiceUsed OPTIONAL,
	seizureTime				[12] TimeStamp OPTIONAL,
	answerTime				[13] TimeStamp OPTIONAL,
	releaseTime				[14] TimeStamp OPTIONAL,
	callDuration				[15] CallDuration,
	dataVolume				[16] DataVolume OPTIONAL,
	causeForTerm				[17] CauseForTerm,
	diagnostics				[18] Diagnostics OPTIONAL,
	callReference			[19] CallReferenceNumber,
	sequenceNumber			[20] INTEGER OPTIONAL,
	recordExtensions			[21] ManagementExtensions OPTIONAL,
	networkCallReference		[22] NetworkCallReference OPTIONAL,
	mSCAddress				[23] MSCAddress OPTIONAL,
	locationRoutNum			[24] LocationRoutingNumber OPTIONAL,
	lrnSoInd					[25] LocationRoutingNumberSourceIndicator OPTIONAL,
	lrnQuryStatus			[26] LocationRoutingNumberQueryStatus OPTIONAL,
	jIPPara					[27] JurisdictionInformationParameter OPTIONAL,
	jIPSoInd					[28] JurisdictionInformationParameterSourceIndicator OPTIONAL,
	jIPQuryStatus			[29] JurisdictionInformationParameterQueryStatus OPTIONAL,
	partialRecordType		[30] PartialRecordType OPTIONAL
}

TermCAMELRecord	::= SET
{
	recordtype					[0] RecordType,
	servedIMSI					[1] IMSI,
	servedMSISDN					[2] MSISDN OPTIONAL,
	recordingEntity				[3] RecordingEntity,
	interrogationTime			[4] TimeStamp,
	destinationRoutingAddress	[5] DestinationRoutingAddress,
	gsm-SCFAddress				[6] Gsm-SCFAddress,
	serviceKey					[7] ServiceKey,
	networkCallReference			[8] NetworkCallReference OPTIONAL,
	mSCAddress					[9] MSCAddress OPTIONAL,
	defaultCallHandling			[10] DefaultCallHandling OPTIONAL,
	recordExtensions				[11] ManagementExtensions OPTIONAL,
	calledNumber					[12] CalledNumber,
	callingNumber				[13] CallingNumber OPTIONAL,
	mscIncomingTKGP				[14] TrunkGroup OPTIONAL,
	mscOutgoingTKGP				[15] TrunkGroup OPTIONAL,
	seizureTime					[16] TimeStamp OPTIONAL,
	answerTime					[17] TimeStamp OPTIONAL,
	releaseTime					[18] TimeStamp OPTIONAL,
	callDuration					[19] CallDuration,
	dataVolume					[20] DataVolume OPTIONAL,
	causeForTerm					[21] CauseForTerm,
	diagnostics					[22] Diagnostics OPTIONAL,
	callReference				[23] CallReferenceNumber,
	sequenceNumber				[24] INTEGER OPTIONAL,
	numberOfDPEncountered		[25] INTEGER OPTIONAL,
	levelOfCAMELService			[26] LevelOfCAMELService OPTIONAL,
	freeFormatData				[27] FreeFormatData OPTIONAL,
	cAMELCallLegInformation		[28] SEQUENCE OF CAMELInformation OPTIONAL,
	freeFormatDataAppend			[29] BOOLEAN OPTIONAL,
	defaultCallHandling-2		[30] DefaultCallHandling OPTIONAL,
	gsm-SCFAddress-2				[31] Gsm-SCFAddress OPTIONAL,
	serviceKey-2					[32] ServiceKey OPTIONAL,
	freeFormatData-2				[33] FreeFormatData OPTIONAL,
	freeFormatDataAppend-2		[34] BOOLEAN OPTIONAL, 
	mscServerIndication			[35] BOOLEAN OPTIONAL,
	locationRoutNum				[36] LocationRoutingNumber OPTIONAL,
	lrnSoInd						[37] LocationRoutingNumberSourceIndicator OPTIONAL,
	lrnQuryStatus				[38] LocationRoutingNumberQueryStatus OPTIONAL,
	jIPPara						[39] JurisdictionInformationParameter OPTIONAL,
	jIPSoInd						[40] JurisdictionInformationParameterSourceIndicator OPTIONAL,
	jIPQuryStatus				[41] JurisdictionInformationParameterQueryStatus OPTIONAL,
	partialRecordType			[42] PartialRecordType OPTIONAL
}

IncGatewayRecord		::= SET
{
	recordType				[0] RecordType,
	callingNumber			[1] CallingNumber OPTIONAL,
	calledNumber				[2] CalledNumber,
	recordingEntity			[3] RecordingEntity,
	mscIncomingTKGP			[4] TrunkGroup OPTIONAL,
	mscOutgoingTKGP			[5] TrunkGroup OPTIONAL,
	seizureTime				[6] TimeStamp OPTIONAL,
	answerTime				[7] TimeStamp OPTIONAL,
	releaseTime				[8] TimeStamp OPTIONAL,
	callDuration				[9] CallDuration,
	dataVolume				[10] DataVolume OPTIONAL,
	causeForTerm				[11] CauseForTerm,
	diagnostics				[12] Diagnostics OPTIONAL,
	callReference			[13] CallReferenceNumber,
	sequenceNumber			[14] INTEGER OPTIONAL,
	recordExtensions			[15] ManagementExtensions OPTIONAL,
	locationRoutNum			[16] LocationRoutingNumber OPTIONAL,
	lrnSoInd					[17] LocationRoutingNumberSourceIndicator OPTIONAL,
	lrnQuryStatus			[18] LocationRoutingNumberQueryStatus OPTIONAL,
	jIPPara					[19] JurisdictionInformationParameter OPTIONAL,
	jIPSoInd					[20] JurisdictionInformationParameterSourceIndicator OPTIONAL,
	jIPQuryStatus			[21] JurisdictionInformationParameterQueryStatus OPTIONAL,
	reasonForServiceChange	[22] ReasonForServiceChange OPTIONAL,
	serviceChangeInitiator	[23] BOOLEAN OPTIONAL
}

OutGatewayRecord		::= SET
{
	recordType				[0] RecordType,
	callingNumber			[1] CallingNumber OPTIONAL,
	calledNumber				[2] CalledNumber,
	recordingEntity			[3] RecordingEntity,
	mscIncomingTKGP			[4] TrunkGroup OPTIONAL,
	mscOutgoingTKGP			[5] TrunkGroup OPTIONAL,
	seizureTime				[6] TimeStamp OPTIONAL,
	answerTime				[7] TimeStamp OPTIONAL,
	releaseTime				[8] TimeStamp OPTIONAL,
	callDuration				[9] CallDuration,
	dataVolume				[10] DataVolume OPTIONAL,
	causeForTerm				[11] CauseForTerm,
	diagnostics				[12] Diagnostics OPTIONAL,
	callReference			[13] CallReferenceNumber,
	sequenceNumber			[14] INTEGER OPTIONAL,
	recordExtensions			[15] ManagementExtensions OPTIONAL,
	locationRoutNum			[16] LocationRoutingNumber OPTIONAL,
	lrnSoInd					[17] LocationRoutingNumberSourceIndicator OPTIONAL,
	lrnQuryStatus			[18] LocationRoutingNumberQueryStatus OPTIONAL,
	jIPPara					[19] JurisdictionInformationParameter OPTIONAL,
	jIPSoInd					[20] JurisdictionInformationParameterSourceIndicator OPTIONAL,
	jIPQuryStatus			[21] JurisdictionInformationParameterQueryStatus OPTIONAL,
	reasonForServiceChange	[22] ReasonForServiceChange OPTIONAL,
	serviceChangeInitiator	[23] BOOLEAN OPTIONAL
}

TransitCallRecord		::= SET
{
	recordType				[0] RecordType,
	recordingEntity			[1] RecordingEntity,
	mscIncomingTKGP			[2] TrunkGroup OPTIONAL,
	mscOutgoingTKGP			[3] TrunkGroup OPTIONAL,
	callingNumber			[4] CallingNumber OPTIONAL,
	calledNumber				[5] CalledNumber,
	isdnBasicService			[6] BasicService OPTIONAL,
	seizureTimestamp			[7] TimeStamp OPTIONAL,
	answerTimestamp			[8] TimeStamp OPTIONAL,
	releaseTimestamp			[9] TimeStamp OPTIONAL,
	callDuration				[10] CallDuration,
	dataVolume				[11] DataVolume OPTIONAL,
	causeForTerm				[12] CauseForTerm,
	diagnostics				[13] Diagnostics OPTIONAL,
	callReference			[14] CallReferenceNumber,
	sequenceNumber			[15] INTEGER OPTIONAL,
	recordExtensions			[16] ManagementExtensions OPTIONAL,
	locationRoutNum			[17] LocationRoutingNumber OPTIONAL,
	lrnSoInd					[18] LocationRoutingNumberSourceIndicator OPTIONAL,
	lrnQuryStatus			[19] LocationRoutingNumberQueryStatus OPTIONAL,
	jIPPara					[20] JurisdictionInformationParameter OPTIONAL,
	jIPSoInd					[21] JurisdictionInformationParameterSourceIndicator OPTIONAL,
	jIPQuryStatus			[22] JurisdictionInformationParameterQueryStatus OPTIONAL
}

MOSMSRecord				::= SET
{
	recordType				[0] RecordType,
	servedIMSI				[1] IMSI,
	servedIMEI				[2] IMEI OPTIONAL,
	servedMSISDN				[3] MSISDN OPTIONAL,
	msClassmark				[4] Classmark,
	serviceCentre			[5] AddressString,
	recordingEntity			[6] RecordingEntity,
	location					[7] LocationAreaAndCell OPTIONAL,
	messageReference			[8] MessageReference,
	originationTime			[9] TimeStamp,
	smsResult				[10] SMSResult OPTIONAL,
	recordExtensions			[11] ManagementExtensions OPTIONAL,
	destinationNumber		[12] SmsTpDestinationNumber OPTIONAL,
	cAMELSMSInformation		[13] CAMELSMSInformation OPTIONAL,
	systemType				[14] SystemType OPTIONAL,
	locationExtension		[15] LocationCellExtension OPTIONAL
}

MTSMSRecord				::= SET
{
	recordType				[0] RecordType,
	serviceCentre			[1] AddressString,
	servedIMSI				[2] IMSI,
	servedIMEI				[3] IMEI OPTIONAL,
	servedMSISDN				[4] MSISDN OPTIONAL,
	msClassmark				[5] Classmark,
	recordingEntity			[6] RecordingEntity,
	location					[7] LocationAreaAndCell OPTIONAL,
	deliveryTime				[8] TimeStamp,
	smsResult				[9] SMSResult OPTIONAL,
	recordExtensions			[10] ManagementExtensions OPTIONAL,
	systemType				[11] SystemType OPTIONAL,
	cAMELSMSInformation		[12] CAMELSMSInformation OPTIONAL,
	locationExtension		[13] LocationCellExtension OPTIONAL
}

MOSMSIWRecord			::= SET
{
	recordType			[0] RecordType,
	serviceCentre		[1] AddressString,
	servedIMSI			[2] IMSI,
	recordingEntity		[3] RecordingEntity,
	eventTime			[4] TimeStamp,
	smsResult			[5] SMSResult OPTIONAL,
	recordExtensions	[6] ManagementExtensions OPTIONAL
}

MTSMSGWRecord			::= SET
{
	recordType			[0] RecordType,
	serviceCentre		[1] AddressString,
	servedIMSI			[2] IMSI,
	servedMSISDN			[3] MSISDN OPTIONAL,
	recordingEntity		[4] RecordingEntity,
	eventTime			[5] TimeStamp,
	smsResult			[6] SMSResult OPTIONAL,
	recordExtensions		[7] ManagementExtensions OPTIONAL
}

SSActionRecord			::= SET
{
	recordType			[0] RecordType,
	servedIMSI			[1] IMSI,
	servedIMEI			[2] IMEI OPTIONAL,
	servedMSISDN			[3] MSISDN OPTIONAL,
	msClassmark			[4] Classmark,
	recordingEntity		[5] RecordingEntity,
	location				[6] LocationAreaAndCell OPTIONAL,
	basicServices		[7] BasicServices OPTIONAL,
	supplService			[8] SS-Code OPTIONAL,
	ssAction				[9] SSActionType OPTIONAL,
	ssActionTime			[10] TimeStamp,
	ssParameters			[11] SSParameters OPTIONAL,
	ssActionResult		[12] SSActionResult OPTIONAL,
	callReference		[13] CallReferenceNumber,
	recordExtensions		[14] ManagementExtensions OPTIONAL,
	systemType			[15] SystemType OPTIONAL
}

HLRIntRecord			::= SET
{
	recordType				[0] RecordType,
	servedIMSI				[1] IMSI,
	servedMSISDN				[2] MSISDN,
	recordingEntity			[3] RecordingEntity,
	basicService				[4] BasicServiceCode OPTIONAL,
	routingNumber			[5] RoutingNumber,
	interrogationTime		[6] TimeStamp,
	numberOfForwarding		[7] NumberOfForwarding OPTIONAL,
	interrogationResult		[8] HLRIntResult OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL
}

LocUpdateHLRRecord 		::= SET
{
	recordType				[0] RecordType,
	servedIMSI				[1] IMSI,
	recordingEntity			[2] RecordingEntity,
	oldLocation				[3] Visited-Location-info OPTIONAL,
	newLocation				[4] Visited-Location-info,
	updateTime				[5] TimeStamp,
	updateResult				[6] LocUpdResult OPTIONAL,
	recordExtensions			[7] ManagementExtensions OPTIONAL
}

LocUpdateVLRRecord 		::= SET
{
	recordType				[0] RecordType,
	servedIMSI				[1] IMSI,
	servedMSISDN				[2] MSISDN OPTIONAL,
	recordingEntity			[3] RecordingEntity,
	oldLocation				[4] Location-info OPTIONAL,
	newLocation				[5] Location-info,
	msClassmark				[6] Classmark,
	updateTime				[7] TimeStamp,
	updateResult				[8] LocUpdResult OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL,
	locationExtension		[10] LocationCellExtension OPTIONAL
}

CommonEquipRecord 		::= SET
{
	recordType				[0] RecordType,
	equipmentType			[1] EquipmentType,
	equipmentId				[2] EquipmentId,
	servedIMSI				[3] IMSI,
	servedMSISDN				[4] MSISDN OPTIONAL,
	recordingEntity			[5] RecordingEntity,
	basicService				[6] BasicServiceCode OPTIONAL,
	changeOfService			[7] SEQUENCE OF ChangeOfService OPTIONAL,
	supplServicesUsed		[8] SEQUENCE OF SuppServiceUsed OPTIONAL,
	seizureTime				[9] TimeStamp,
	releaseTime				[10] TimeStamp OPTIONAL,
	callDuration				[11] CallDuration,
	callReference			[12] CallReferenceNumber,
	sequenceNumber			[13] INTEGER OPTIONAL,
	recordExtensions			[14] ManagementExtensions OPTIONAL,
	systemType				[15] SystemType OPTIONAL,
	rateIndication			[16] RateIndication OPTIONAL,
	fnur						[17] Fnur OPTIONAL
}

--
--  OBSERVED IMEI TICKETS
--

ObservedIMEITicket		::= SET
{
	servedIMEI			[0] IMEI,
	imeiStatus			[1] IMEIStatus,
	servedIMSI			[2] IMSI,
	servedMSISDN			[3] MSISDN OPTIONAL,
	recordingEntity		[4] RecordingEntity,
	eventTime			[5] TimeStamp,
	location				[6] LocationAreaAndCell	,
	imeiCheckEvent		[7] IMEICheckEvent OPTIONAL,
	callReference		[8] CallReferenceNumber OPTIONAL,
	recordExtensions		[9] ManagementExtensions OPTIONAL
}

--
--  CS LOCATION SERVICE RECORDS
--

MTLCSRecord				::= SET
{
	recordType				[0] RecordType,
	recordingEntity			[1] RecordingEntity,
	lcsClientType			[2] LCSClientType,
	lcsClientIdentity		[3] LCSClientIdentity,
	servedIMSI				[4] IMSI OPTIONAL,
	servedMSISDN				[5] MSISDN OPTIONAL,
	locationType				[6] LocationType,
	lcsQos					[7] LCSQoSInfo OPTIONAL,
	lcsPriority				[8] LCS-Priority OPTIONAL,
	mlc-Number				[9] ISDN-AddressString,
	eventTimeStamp			[10] TimeStamp,
	measureDuration			[11] CallDuration OPTIONAL,
	notificationToMSUser		[12] NotificationToMSUser OPTIONAL,
	privacyOverride			[13] NULL OPTIONAL,
	location					[14] LocationAreaAndCell OPTIONAL,
	locationEstimate			[15] Ext-GeographicalInformation OPTIONAL,
	positioningData			[16] PositioningData OPTIONAL,
	lcsCause					[17] LCSCause OPTIONAL,
	diagnostics				[18] Diagnostics OPTIONAL,
	systemType				[19] SystemType OPTIONAL,
	recordExtensions			[20] ManagementExtensions OPTIONAL,
	causeForTerm				[21] CauseForTerm,
	servedIMEI				[22] IMEI OPTIONAL
}

MOLCSRecord				::= SET
{
	recordType				[0] RecordType,
	recordingEntity			[1] RecordingEntity,
	lcsClientType			[2] LCSClientType OPTIONAL,
	lcsClientIdentity		[3] LCSClientIdentity OPTIONAL,
	servedIMSI				[4] IMSI,
	servedMSISDN				[5] MSISDN OPTIONAL,
	molr-Type				[6] MOLR-Type,
	lcsQos					[7] LCSQoSInfo OPTIONAL,
	lcsPriority				[8] LCS-Priority OPTIONAL,
	mlc-Number				[9] ISDN-AddressString OPTIONAL,
	eventTimeStamp			[10] TimeStamp,
	measureDuration			[11] CallDuration OPTIONAL,
	location					[12] LocationAreaAndCell OPTIONAL,
	locationEstimate			[13] Ext-GeographicalInformation OPTIONAL,
	positioningData			[14] PositioningData OPTIONAL,
	lcsCause					[15] LCSCause OPTIONAL,
	diagnostics				[16] Diagnostics OPTIONAL,
	systemType				[17] SystemType OPTIONAL,
	recordExtensions			[18] ManagementExtensions OPTIONAL,
	causeForTerm				[19] CauseForTerm
}

NILCSRecord				::= SET
{
	recordType				[0] RecordType,
	recordingEntity			[1] RecordingEntity,
	lcsClientType			[2] LCSClientType OPTIONAL,
	lcsClientIdentity		[3] LCSClientIdentity OPTIONAL,
	servedIMSI				[4] IMSI OPTIONAL,
	servedMSISDN				[5] MSISDN OPTIONAL,
	servedIMEI				[6] IMEI OPTIONAL,
	emsDigits				[7] ISDN-AddressString OPTIONAL,
	emsKey					[8] ISDN-AddressString OPTIONAL,
	lcsQos					[9] LCSQoSInfo OPTIONAL,
	lcsPriority				[10] LCS-Priority OPTIONAL,
	mlc-Number				[11] ISDN-AddressString OPTIONAL,
	eventTimeStamp			[12] TimeStamp,
	measureDuration			[13] CallDuration OPTIONAL,
	location					[14] LocationAreaAndCell OPTIONAL,
	locationEstimate			[15] Ext-GeographicalInformation OPTIONAL,
	positioningData			[16] PositioningData OPTIONAL,
	lcsCause					[17] LCSCause OPTIONAL,
	diagnostics				[18] Diagnostics OPTIONAL,
	systemType				[19] SystemType OPTIONAL,
	recordExtensions			[20] ManagementExtensions OPTIONAL,
	causeForTerm				[21] CauseForTerm
}

--
--  SRVCC RECORDS
--

MSCsRVCCRecord	::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[1] IMSI OPTIONAL,
	servedIMEI					[2] IMEI OPTIONAL,
	servedMSISDN					[3] MSISDN OPTIONAL,
	calledNumber					[5] CalledNumber,		
	recordingEntity				[9] RecordingEntity,
	mscOutgoingTKGP				[11] TrunkGroup OPTIONAL,
	location						[12] LocationAreaAndCell,
	changeOfLocation				[13] SEQUENCE OF LocationChange OPTIONAL,
	basicService					[14] BasicServiceCode,
	supplServicesUsed			[17] SEQUENCE OF SuppServiceUsed OPTIONAL,
	msClassmark					[20] Classmark OPTIONAL,
	seizureTime					[22] TimeStamp OPTIONAL,
	answerTime					[23] TimeStamp OPTIONAL,
	releaseTime					[24] TimeStamp OPTIONAL,
	callDuration					[25] CallDuration,
	causeForTerm					[30] CauseForTerm,
	diagnostics					[31] Diagnostics OPTIONAL,
	callReference				[32] CallReferenceNumber,
	sequenceNumber				[33] INTEGER OPTIONAL,
	recordExtensions				[35] ManagementExtensions OPTIONAL,
	partialRecordType			[69] PartialRecordType OPTIONAL,
	iMS-Charging-Identifier		[75] IMS-Charging-Identifier OPTIONAL,
	iCSI2ActiveFlag				[76] NULL OPTIONAL,
	relatedICID					[77] IMS-Charging-Identifier OPTIONAL,
	relatedICIDGenerationNode	[78] NodeAddress OPTIONAL
}

--
--  MTRF RECORD
--

MTRFRecord			::= SET
{
	recordType				[0] RecordType,
	servedIMSI				[1] IMSI,
	servedIMEI				[2] IMEI OPTIONAL,
	servedMSISDN				[3] CalledNumber OPTIONAL,
	callingNumber			[4] CallingNumber OPTIONAL,
	roamingNumber			[5] RoamingNumber OPTIONAL,
	recordingEntity			[6] RecordingEntity,
	mscIncomingTKGP			[7] TrunkGroup OPTIONAL,
	mscOutgoingTKGP			[8] TrunkGroup OPTIONAL,
	basicService				[9] BasicServiceCode OPTIONAL,
	seizureTime				[10] TimeStamp OPTIONAL,
	answerTime				[11] TimeStamp OPTIONAL,
	releaseTime				[12] TimeStamp OPTIONAL,
	callDuration				[13] CallDuration,
	causeForTerm				[14] CauseForTerm,
	diagnostics				[15] Diagnostics OPTIONAL,
	callReference			[16] CallReferenceNumber,
	sequenceNumber			[17] INTEGER OPTIONAL,
	recordExtensions			[18] ManagementExtensions OPTIONAL,
	partialRecordType		[19] PartialRecordType OPTIONAL
}

--
--  ICS RECORD
--

ICSregisterRecord ::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[1] IMSI,
	servedMSISDN					[2] MSISDN,
	privateUserID				[3] GraphicString OPTIONAL, 
	recordingEntity				[4] RecordingEntity,
	newLocation					[5] Location-info,
	locationExtension			[6] LocationCellExtension OPTIONAL,
	updateTime					[7] TimeStamp OPTIONAL,
	iMS-Charging-Identifier		[8] IMS-Charging-Identifier OPTIONAL,
	interOperatorIdentifiers		[9] InterOperatorIdentifierList OPTIONAL,
	transit-IOI-Lists			[10] TransitIOILists OPTIONAL,
	updateResult					[11] LocUpdResult OPTIONAL,
	recordExtensions				[12] ManagementExtensions OPTIONAL
}

--
--  NP Fields
--

LocationRoutingNumber	::= OCTET STRING (SIZE (5))
--
--  The format is selected to meet the existing standards for the wireline in Telcordia
--   Belcore GR-1100-CORE, BAF Module 720.
--

LocationRoutingNumberSourceIndicator	::=	INTEGER
{
	lRN-NP-Database				(1),
	switchingSystemData			(2),
	incomingsignaling			(3),
	unknown						(9)
}

LocationRoutingNumberQueryStatus 		::=	INTEGER
{
	successfulQuery				(1),
	noQueryResponseMsg			(2),
	queryProtocolErr				(4),
	queryResponseDataErr			(5),
	queryRejected				(6),
	queryNotPerformed			(9),
 	queryUnsuccessful			(99)
}

JurisdictionInformationParameter 	::= OCTET STRING (SIZE (5))
--
-- /* JIP Parameter */
--

JurisdictionInformationParameterSourceIndicator 	::=	INTEGER
--
-- Identical to LocationRoutingNumberSourceIndicator
--
{
	lRN-NP-Database				(1),
	switchingSystemData			(2),
	incomingsignaling			(3),
	unknown						(9)
}

JurisdictionInformationParameterQueryStatus 	::=	INTEGER
{
	successfulQuery				(1),
	noQueryResponseMsg			(2),
	queryProtocolErr				(4),
	queryResponseDataErr			(5),
	queryRejected				(6),
	queryNotPerformed			(9),
 	queryUnsuccessful			(99)
}

--
--  CS DATA TYPES
--

AdditionalChgInfo		::= SEQUENCE 
{
	chargeIndicator		[0] ChargeIndicator OPTIONAL,
	chargeParameters	[1] OCTET STRING OPTIONAL
}

AiurRequested			::= ENUMERATED
--
-- See Bearer Capability TS 24.008 [208]
-- (note that value "4" is intentionally missing
-- because it is not used in TS 24.008 [208])
--
{
	aiur09600BitsPerSecond		(1),
	aiur14400BitsPerSecond		(2),
	aiur19200BitsPerSecond		(3),
	aiur28800BitsPerSecond		(5),
	aiur38400BitsPerSecond		(6),
	aiur43200BitsPerSecond		(7),
	aiur57600BitsPerSecond		(8),
	aiur38400BitsPerSecond1		(9),
	aiur38400BitsPerSecond2		(10),
	aiur38400BitsPerSecond3		(11),
	aiur38400BitsPerSecond4		(12)
}

AOCParameters			::= SEQUENCE
-- 
-- See TS 22.024 [104]. 
--
{
	e1					[1] EParameter OPTIONAL,
	e2					[2] EParameter OPTIONAL,
	e3					[3] EParameter OPTIONAL,
	e4					[4] EParameter OPTIONAL,
	e5					[5] EParameter OPTIONAL,
	e6					[6] EParameter OPTIONAL,
	e7					[7] EParameter OPTIONAL
}

AOCParmChange			::= SEQUENCE 
{
	changeTime			[0] TimeStamp,
	newParameters		[1] AOCParameters
}

BasicServices			::= SET OF BasicServiceCode

CallingPartyCategory	::= Category

CallType				::= INTEGER
{
	mobileOriginated	(0),
	mobileTerminated	(1)
}

CallTypes 				::= SET OF CallType

CAMELDestinationNumber	::= DestinationRoutingAddress

CAMELInformation		::= SET
{
	cAMELDestinationNumber		[1] CAMELDestinationNumber OPTIONAL,
	connectedNumber				[2] ConnectedNumber OPTIONAL,
	roamingNumber				[3] RoamingNumber OPTIONAL,
	mscOutgoingTKGP				[4] TrunkGroup OPTIONAL,
	seizureTime					[5] TimeStamp OPTIONAL,
	answerTime					[6] TimeStamp OPTIONAL,
	releaseTime					[7] TimeStamp OPTIONAL,
	callDuration					[8] CallDuration OPTIONAL,
	dataVolume					[9] DataVolume OPTIONAL,
	cAMELInitCFIndicator			[10] CAMELInitCFIndicator OPTIONAL,
	causeForTerm					[11] CauseForTerm OPTIONAL,
	cAMELModification			[12] ChangedParameters OPTIONAL,
	freeFormatData				[13] FreeFormatData OPTIONAL,
	diagnostics					[14] Diagnostics OPTIONAL,
	freeFormatDataAppend			[15] BOOLEAN OPTIONAL,
	freeFormatData-2				[16] FreeFormatData OPTIONAL,
	freeFormatDataAppend-2		[17] BOOLEAN OPTIONAL
}

CAMELInitCFIndicator	::= ENUMERATED
{
	noCAMELCallForwarding		(0),
	cAMELCallForwarding			(1)
}

CAMELModificationParameters		::= SET
--
-- The list contains only parameters changed due to CAMEL call handling.
--
{
	callingPartyNumber			[0] CallingNumber OPTIONAL,
	callingPartyCategory			[1] CallingPartyCategory OPTIONAL,
	originalCalledPartyNumber	[2] OriginalCalledNumber OPTIONAL,
	genericNumbers				[3] GenericNumbers OPTIONAL,
	redirectingPartyNumber		[4] RedirectingNumber OPTIONAL,
	redirectionCounter			[5] NumberOfForwarding OPTIONAL
}

CAMELSMSInformation		::= SET
{
	gsm-SCFAddress						[1] Gsm-SCFAddress OPTIONAL,
	serviceKey							[2] ServiceKey OPTIONAL,
	defaultSMSHandling			 		[3] DefaultSMS-Handling OPTIONAL, 
	freeFormatData       				[4] FreeFormatData OPTIONAL,
	callingPartyNumber 					[5] CallingNumber OPTIONAL,
	destinationSubscriberNumber			[6] SmsTpDestinationNumber OPTIONAL,
	cAMELSMSCAddress						[7] AddressString OPTIONAL,
	smsReferenceNumber					[8] CallReferenceNumber OPTIONAL
}

Category		::= OCTET STRING (SIZE(1))
--
-- The internal structure is defined in Recommendation Q.763.
--

ChangedParameters		::= SET
{
	changeFlags		[0] ChangeFlags,
	changeList		[1] CAMELModificationParameters OPTIONAL
}

ChangeFlags				::= BIT STRING
{
	callingPartyNumberModified			(0),
	callingPartyCategoryModified			(1),
	originalCalledPartyNumberModified	(2),
	genericNumbersModified				(3),
	redirectingPartyNumberModified		(4),
	redirectionCounterModified			(5)
}

ChangeOfClassmark 		::= SEQUENCE
{
	classmark			[0] Classmark,
	changeTime			[1] TimeStamp
}

ChangeOfRadioChannel 	::= SEQUENCE
{
	radioChannel		[0] TrafficChannel,
	changeTime			[1] TimeStamp,
	speechVersionUsed	[2] SpeechVersionIdentifier OPTIONAL
}

ChangeOfService 		::= SEQUENCE
{
	basicService		[0] BasicServiceCode,
	transparencyInd	[1] TransparencyInd OPTIONAL,
	changeTime		[2] TimeStamp,
	rateIndication	[3] RateIndication OPTIONAL,
	fnur				[4] Fnur OPTIONAL
}

ChannelCoding				::= ENUMERATED
{
	tchF4800				(1),
	tchF9600				(2),
	tchF14400			(3)
}

Classmark				::= OCTET STRING
--
-- See Mobile station classmark 2, Mobile station classmark 3, TS 24.008[208]
--

ConnectedNumber			::= BCDDirectoryNumber

DataVolume				::= INTEGER
--
-- The volume of data transferred in segments of 64 octets.
--

Day						::= INTEGER (1..31)

DayClass				::= ObjectInstance

DayClasses				::= SET OF DayClass

DayDefinition			::= SEQUENCE
{
	day				[0] DayOfTheWeek,
	dayClass			[1] ObjectInstance
}

DayDefinitions			::= SET OF DayDefinition

DateDefinition			::= SEQUENCE 
{
	month				[0] Month,
	day					[1] Day,
	dayClass				[2] ObjectInstance
}

DateDefinitions			::= SET OF DateDefinition

DayOfTheWeek			::= ENUMERATED
{
	allDays				(0),
	sunday				(1),
	monday				(2),
	tuesday				(3),
	wednesday			(4),
	thursday				(5),
	friday				(6),
	saturday				(7)
}

Destinations			::= SET OF AE-title

EmergencyCallIndEnable	::= BOOLEAN

EmergencyCallIndication	::= SEQUENCE
{
	cellId			[0] CellId,
	callerId			[1] IMSIorIMEI
}

EParameter ::= INTEGER

EquipmentId				::= INTEGER

EquipmentType			::= INTEGER
{
	conferenceBridge	(0)
}

FileType				::= INTEGER
{
	callRecords			(1),
	traceRecords			(9), 
	observedIMEITicket	(14)
}

Fnur					::= ENUMERATED
--
-- See Bearer Capability TS 24.008 [208]
--
{
	fnurNotApplicable			(0),
	fnur9600-BitsPerSecond		(1),
	fnur14400BitsPerSecond		(2),
	fnur19200BitsPerSecond		(3),
	fnur28800BitsPerSecond		(4),
	fnur38400BitsPerSecond		(5),
	fnur48000BitsPerSecond		(6),
	fnur56000BitsPerSecond		(7),
	fnur64000BitsPerSecond		(8),
	fnur33600BitsPerSecond		(9),
	fnur32000BitsPerSecond		(10),
	fnur31200BitsPerSecond		(11)
}

ForwardToNumber 		::= AddressString

FreeFormatData			::= OCTET STRING (SIZE(1..160))
--
-- Free formatted data as sent in the FCI message
-- See TS 29.078 [217]
--

GenericNumber			::= BCDDirectoryNumber

GenericNumbers			::= SET OF GenericNumber

Gsm-SCFAddress			::= ISDN-AddressString
--
-- See TS 29.002 [214]
--

GuaranteedBitRate ::= ENUMERATED
{
	gbr14400BitsPerSecond (1),		-- BS20 non-transparent
	gbr28800BitsPerSecond (2),		-- BS20 non-transparent and transparent,
									-- BS30 transparent and multimedia
	gbr32000BitsPerSecond (3),		-- BS30 multimedia
	gbr33600BitsPerSecond (4),		-- BS30 multimedia
	gbr56000BitsPerSecond (5),		-- BS30 transparent and multimedia
	gbr57600BitsPerSecond (6),		-- BS20 non-transparent
	gbr64000BitsPerSecond (7)		-- BS30 transparent and multimedia
}

HLRIntResult			::= Diagnostics

HSCSDParmsChange		::= SEQUENCE
{
	changeTime				[0] TimeStamp,
	hSCSDChanAllocated		[1] NumOfHSCSDChanAllocated,
	initiatingParty			[2] InitiatingParty OPTIONAL,
	aiurRequested			[3] AiurRequested OPTIONAL,
	chanCodingUsed			[4] ChannelCoding,
	hSCSDChanRequested		[5] NumOfHSCSDChanRequested OPTIONAL
}

IMEICheckEvent			::= INTEGER
{
	mobileOriginatedCall	(0),
	mobileTerminatedCall	(1),
	smsMobileOriginating	(2),
	smsMobileTerminating	(3),
	ssAction				(4),
	locationUpdate		(5)
}

IMEIStatus				::= ENUMERATED
{
	greyListedMobileEquipment		(0),
	blackListedMobileEquipment		(1),
	nonWhiteListedMobileEquipment	(2)
}

IMSIorIMEI				::= CHOICE
{
	imsi				[0] IMSI,
	imei				[1] IMEI
}

InitiatingParty			::= ENUMERATED
{
	network				(0),
	subscriber			(1)
}

LocationCellExtension	::= BIT STRING (SIZE (12))

LocationChange			::= SEQUENCE
{
	location			[0] LocationAreaAndCell,
	changeTime		[1] TimeStamp
}

Location-info			::= SEQUENCE
{
	mscNumber			[1] MscNo OPTIONAL,
	location-area		[2] LocationAreaCode,
	cell-identification	[3] CellId OPTIONAL,
	mCC-MNC				[4] MCC-MNC OPTIONAL
}

LocUpdResult			::= Diagnostics

MaximumBitRate ::= ENUMERATED
{
	mbr14400BitsPerSecond	(1),		-- BS20 non-transparent
	mbr28800BitsPerSecond	(2),		-- BS20 non-transparent and transparent,
									-- BS30 transparent and multimedia
	mbr32000BitsPerSecond	(3),		-- BS30 multimedia
	mbr33600BitsPerSecond	(4),		-- BS30 multimedia
	mbr56000BitsPerSecond	(5),		-- BS30 transparent and multimedia
	mbr57600BitsPerSecond	(6)		-- BS20 non-transparent
}

Month		::= INTEGER (1..12)

MSPowerClasses	::= SET OF RFPowerCapability

NetworkCallReference	::= CallReferenceNumber
--
-- See TS 29.002 [214]
--

NetworkSpecificCode		::= INTEGER
-- 
-- To be defined by network operator
--

NetworkSpecificServices	::= SET OF NetworkSpecificCode

NumOfHSCSDChanRequested		::= INTEGER

NumOfHSCSDChanAllocated		::= INTEGER

ObservedIMEITicketEnable	::= BOOLEAN

OriginalCalledNumber	::= BCDDirectoryNumber

OriginDestCombinations	::= SET OF OriginDestCombination

OriginDestCombination	::= SEQUENCE
--
-- Note that these values correspond to the contents
-- of the attributes originId and destinationId
-- respectively. At least one of the two must be present.
--
{
	origin					[0] INTEGER OPTIONAL,
	destination				[1] INTEGER OPTIONAL
}

PartialRecordTimer	::= INTEGER

PartialRecordType	::= ENUMERATED
{
	timeLimit					(0),
	serviceChange				(1),
	locationChange				(2),
	classmarkChange				(3),
	aocParmChange				(4),
	radioChannelChange			(5),
	hSCSDParmChange				(6),
	changeOfCAMELDestination	(7)
}

PartialRecordTypes		::= SET OF PartialRecordType

RadioChannelsRequested	::= SET OF RadioChanRequested

RadioChanRequested	::= ENUMERATED
--
-- See Bearer Capability TS 24.008 [208]
--
{
	halfRateChannel				(0),
	fullRateChannel				(1),
	dualHalfRatePreferred		(2),
	dualFullRatePreferred		(3)
}

RateIndication ::= OCTET STRING(SIZE(1))

ReasonForServiceChange	::= ENUMERATED
{
	msubInitiated			(0),
	mscInitiated				(1),
	callSetupFallBack		(2),
	callSetupChangeOrder		(3)
}

RecordClassDestination	::= CHOICE
{
	osApplication	[0] AE-title,
	fileType			[1] FileType
}

RecordClassDestinations	::= SET OF RecordClassDestination

RecordingMethod	::= ENUMERATED
{
	inCallRecord		(0),
	inSSRecord		(1)
}

RedirectingNumber	::= BCDDirectoryNumber

RFPowerCapability	::= INTEGER
--
-- This field contains the RF power capability of the Mobile station
-- classmark 1 and 2 of TS 24.008 [208] expressed as an integer.
-- 

RoamingNumber			::= ISDN-AddressString
-- 
-- See TS 23.003 [200]
--

RoutingNumber			::= CHOICE
{
	roaming				[1] RoamingNumber,
	forwarded			[2] ForwardToNumber	
}

Service						::= CHOICE
{
	teleservice					[1] TeleserviceCode,
	bearerService				[2] BearerServiceCode,
	supplementaryService			[3] SS-Code,
	networkSpecificService		[4] NetworkSpecificCode
}

ServiceDistanceDependencies	::= SET OF ServiceDistanceDependency

ServiceDistanceDependency	::= SEQUENCE
--
-- Note that these values correspond to the contents
-- of the attributes aocServiceId and zoneId
-- respectively.
--
{
	aocService			[0] INTEGER,
	chargingZone			[1] INTEGER OPTIONAL
}

SimpleIntegerName			::= INTEGER

SimpleStringName			::= GraphicString

SpeechVersionIdentifier		::= OCTET STRING (SIZE(1))
--
--	see GSM 08.08[313]
--
--	000 0001	GSM speech full rate version 1
--	001 0001	GSM speech full rate version 2	used for enhanced full rate
--	010 0001	GSM speech full rate version 3	for future use
--	000 0101	GSM speech half rate version 1
--	001 0101	GSM speech half rate version 2 	for future use
--	010 0101	GSM speech half rate version 3	for future use
--

SSActionResult				::= Diagnostics

SSActionType				::= ENUMERATED
{
	registration				(0),
	erasure					(1),
	activation				(2),
	deactivation				(3),
	interrogation			(4),
	invocation				(5),
	passwordRegistration		(6)
}

SSParameters				::= CHOICE
{
	forwardedToNumber	[0] ForwardToNumber,
	unstructuredData		[1] OCTET STRING
}

SupplServices				::= SET OF SS-Code

SuppServiceUsed				::= SEQUENCE
{
	ssCode					[0] SS-Code,
	ssTime					[1] TimeStamp OPTIONAL
}

SwitchoverTime				::= SEQUENCE
{
	hour					INTEGER (0..23),
	minute					INTEGER (0..59),
	second					INTEGER (0..59)
}

TariffId					::= INTEGER

TariffPeriod				::= SEQUENCE
--
-- Note that the value of tariffId corresponds to the attribute tariffId.
--
{
	switchoverTime			[0] SwitchoverTime,
	tariffId				[1] INTEGER
}

TariffPeriods				::= SET OF TariffPeriod

TariffSystemStatus			::= ENUMERATED
{
	available				(0),	-- available for modification
	checked					(1),	-- "frozen" and checked
	standby					(2),	-- "frozen" awaiting activation
	active					(3)		-- "frozen" and active
}

TrafficChannel			::=	ENUMERATED
{
	fullRate			(0),
	halfRate			(1)
}

TranslatedNumber		::= 	BCDDirectoryNumber

TransparencyInd			::=	ENUMERATED
{
	transparent			(0),
	nonTransparent		(1)
}

TrunkGroup				::=	 CHOICE
{
	tkgpNumber		[0] INTEGER,
	tkgpName			[1] GraphicString
}

TSChangeover			::=	SEQUENCE
--
-- Note that if the changeover time is not
-- specified then the change is immediate.
--
{
	newActiveTS			[0] INTEGER,
	newStandbyTS			[1] INTEGER,
	changeoverTime		[2] GeneralizedTime OPTIONAL,
	authkey				[3] OCTET STRING OPTIONAL,
	checksum				[4] OCTET STRING OPTIONAL,
	versionNumber		[5] OCTET STRING OPTIONAL
}

TSCheckError			::=	SEQUENCE
{
	errorId				[0] TSCheckErrorId,
	fail					ANY DEFINED BY errorId OPTIONAL
}

TSCheckErrorId			::=	CHOICE
{
	globalForm			[0] OBJECT IDENTIFIER,
	localForm			[1] INTEGER
}

TSCheckResult			::=	CHOICE
{
	success				[0] NULL,
	fail					[1] SET OF TSCheckError
}

TSCopyTariffSystem		::=	SEQUENCE
{
	oldTS				[0] INTEGER,
	newTS				[1] INTEGER
}

TSNextChange			::=	CHOICE
{
	noChangeover			[0] NULL,
	tsChangeover			[1] TSChangeover
}

TypeOfSubscribers		::= ENUMERATED
{
	home					(0),	-- HPLMN subscribers
	visiting				(1),	-- roaming subscribers
	all	(2)
}

TypeOfTransaction		::=	ENUMERATED
{
	successful			(0),
	unsuccessful			(1),
	all					(2)
}

Visited-Location-info		::= SEQUENCE
{
	mscNumber			[1] MscNo,
	vlrNumber			[2] VlrNo
}

VlrNo		::= ISDN-AddressString
--
-- See TS 23.003 [200]
--


.#END

5.2.2.2	PS domain CDRs
This subclause contains the abstract syntax definitions that are specific to the GPRS and EPC CDR types defined in TS 32.251 [11].
.$GPRSChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) gprsChargingDataTypes (2) asn1Module (0) version2 (1)}
DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS	

AddressString,
CallDuration,
CallingNumber,
CauseForRecClosing,
CellId, 
ChargingID,
CivicAddressInformation,
Diagnostics, 
DiameterIdentity,
DynamicAddressFlag, 
EnhancedDiagnostics,
GSNAddress,
InvolvedParty,
IPAddress,
LCSCause,
LCSClientIdentity,
LCSQoSInfo,
LevelOfCAMELService,
LocalSequenceNumber,
LocationAreaAndCell,
LocationAreaCode,
ManagementExtensions,
MBMSInformation,
MessageReference, 
MSISDN,
MSTimeZone,
NodeID,
PDPAddress,
PLMN-Id,
PositioningData,
RATType,
RecordingEntity,
RecordType,
RoutingAreaCode,
SCSASAddress,
ServiceSpecificInfo,
SMSResult,
SmsTpDestinationNumber,
SubscriptionID, 
ThreeGPPPSDataOffStatus,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

DefaultGPRS-Handling,
DefaultSMS-Handling,
NotificationToMSUser,
ServiceKey
FROM MAP-MS-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0)
gsm-Network (1) modules (3) map-MS-DataTypes (11) version18 (18)}
-- from TS 29.002 [214]

IMEI,
IMSI,
ISDN-AddressString,
RAIdentity
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0)gsm-Network (1) modules (3) map-CommonDataTypes (18) version18 (18)}
-- from TS 29.002 [214]

CallReferenceNumber
FROM MAP-CH-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0)gsm-Network (1) modules (3) map-CH-DataTypes (13) version18 (18)}
-- from TS 29.002 [214]

Ext-GeographicalInformation,
LCSClientType,
LCS-Priority,
LocationType
FROM MAP-LCS-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-LCS-DataTypes (25) version18 (18) }
-- from TS 29.002 [214]

LocationMethod
FROM SS-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Access (2) modules (3) ss-DataTypes (2) version14 (14)}
-- from TS 24.080 [209] 

;

--
--  GPRS RECORDS
--

GPRSRecord	::= CHOICE 
--
-- Record values 20, 22..27 are specific
-- Record values 76, 77, 86 are MBMS specific
-- Record values 78,79 and 92, 95, 96 are EPC specific 
--
{
	sgsnPDPRecord			[20] SGSNPDPRecord,
	sgsnMMRecord			[22] SGSNMMRecord,
	sgsnSMORecord			[23] SGSNSMORecord,
	sgsnSMTRecord			[24] SGSNSMTRecord,
	sgsnMTLCSRecord			[25] SGSNMTLCSRecord,
	sgsnMOLCSRecord			[26] SGSNMOLCSRecord,
	sgsnNILCSRecord			[27] SGSNNILCSRecord,

	sgsnMBMSRecord			[76] SGSNMBMSRecord,
	ggsnMBMSRecord			[77] GGSNMBMSRecord,
	sGWRecord				[78] SGWRecord,
	pGWRecord				[79] PGWRecord,

	gwMBMSRecord			[86] GWMBMSRecord,

	tDFRecord				[92] TDFRecord,

	iPERecord				[95] IPERecord,
	ePDGRecord				[96] EPDGRecord,
	tWAGRecord				[97] TWAGRecord
}

SGWRecord 	::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[3] IMSI OPTIONAL,
	s-GWAddress					[4] GSNAddress,
	chargingID					[5] ChargingID,
	servingNodeAddress			[6] SEQUENCE OF GSNAddress,
	accessPointNameNI			[7] AccessPointNameNI OPTIONAL,
	pdpPDNType					[8] PDPType OPTIONAL,
	servedPDPPDNAddress			[9] PDPAddress OPTIONAL,
	dynamicAddressFlag			[11] DynamicAddressFlag OPTIONAL,
	listOfTrafficVolumes		[12] SEQUENCE OF ChangeOfCharCondition OPTIONAL,
	recordOpeningTime			[13] TimeStamp,
	duration					[14] CallDuration,
	causeForRecClosing			[15] CauseForRecClosing,
	diagnostics					[16] Diagnostics OPTIONAL,
	recordSequenceNumber		[17] INTEGER OPTIONAL,
	nodeID						[18] NodeID OPTIONAL,
	recordExtensions			[19] ManagementExtensions OPTIONAL,
	localSequenceNumber			[20] LocalSequenceNumber OPTIONAL,
	apnSelectionMode			[21] APNSelectionMode OPTIONAL,
	servedMSISDN				[22] MSISDN OPTIONAL,
	chargingCharacteristics		[23] ChargingCharacteristics,
	chChSelectionMode			[24] ChChSelectionMode OPTIONAL,
	iMSsignalingContext			[25] NULL OPTIONAL,
	servingNodePLMNIdentifier	[27] PLMN-Id OPTIONAL,
	servedIMEI					[29] IMEI OPTIONAL,
	rATType						[30] RATType OPTIONAL,
	mSTimeZone 					[31] MSTimeZone OPTIONAL,
	userLocationInformation		[32] OCTET STRING OPTIONAL,
	sGWChange					[34] SGWChange OPTIONAL,
	servingNodeType				[35] SEQUENCE OF ServingNodeType,
	p-GWAddressUsed				[36] GSNAddress OPTIONAL,
	p-GWPLMNIdentifier			[37] PLMN-Id OPTIONAL,
	startTime					[38] TimeStamp OPTIONAL,
	stopTime					[39] TimeStamp OPTIONAL,
	pDNConnectionChargingID		[40] ChargingID OPTIONAL,
	iMSIunauthenticatedFlag 	[41] NULL OPTIONAL,
	userCSGInformation			[42] UserCSGInformation OPTIONAL,
	servedPDPPDNAddressExt 		[43] PDPAddress OPTIONAL,
	lowPriorityIndicator		[44] NULL OPTIONAL,
	dynamicAddressFlagExt		[47] DynamicAddressFlag OPTIONAL,
	s-GWiPv6Address				[48] GSNAddress OPTIONAL,
	servingNodeiPv6Address		[49] SEQUENCE OF GSNAddress OPTIONAL,
	p-GWiPv6AddressUsed			[50] GSNAddress OPTIONAL,
	retransmission				[51] NULL OPTIONAL,
	userLocationInfoTime		[52] TimeStamp OPTIONAL,
	cNOperatorSelectionEnt		[53] CNOperatorSelectionEntity OPTIONAL,
	presenceReportingAreaInfo	[54] PresenceReportingAreaInfo OPTIONAL,
	lastUserLocationInformation	[55] OCTET STRING OPTIONAL,
	lastMSTimeZone				[56] MSTimeZone OPTIONAL,
	enhancedDiagnostics			[57] EnhancedDiagnostics OPTIONAL,
	cPCIoTEPSOptimisationIndicator [59] CPCIoTEPSOptimisationIndicator OPTIONAL,
	uNIPDUCPOnlyFlag			[60] UNIPDUCPOnlyFlag OPTIONAL, 
	servingPLMNRateControl		[61] ServingPLMNRateControl OPTIONAL,
	pDPPDNTypeExtension			[62] PDPPDNTypeExtension OPTIONAL,
	mOExceptionDataCounter		[63] MOExceptionDataCounter OPTIONAL,
	listOfRANSecondaryRATUsageReports [64] SEQUENCE OF RANSecondaryRATUsageReport OPTIONAL
}

PGWRecord 	::= SET
--
--	List of traffic volumes is only applicable when Charging per IP-CAN session is active and
--	IP-CAN bearer charging is being performed for the session.
--
--	EPC QoS Information is only applicable when Charging per IP-CAN session is active.
--
{
	recordType						[0] RecordType,
	servedIMSI						[3] IMSI OPTIONAL,
	p-GWAddress						[4] GSNAddress,
	chargingID						[5] ChargingID,
	servingNodeAddress				[6] SEQUENCE OF GSNAddress,
	accessPointNameNI				[7] AccessPointNameNI OPTIONAL,
	pdpPDNType						[8] PDPType OPTIONAL,
	servedPDPPDNAddress				[9] PDPAddress OPTIONAL,
	dynamicAddressFlag				[11] DynamicAddressFlag OPTIONAL,
	listOfTrafficVolumes			[12] SEQUENCE OF ChangeOfCharCondition OPTIONAL,
	recordOpeningTime				[13] TimeStamp,
	duration						[14] CallDuration,
	causeForRecClosing				[15] CauseForRecClosing,
	diagnostics						[16] Diagnostics OPTIONAL,
	recordSequenceNumber			[17] INTEGER OPTIONAL,
	nodeID							[18] NodeID OPTIONAL,
	recordExtensions				[19] ManagementExtensions OPTIONAL,
	localSequenceNumber				[20] LocalSequenceNumber OPTIONAL,
	apnSelectionMode				[21] APNSelectionMode OPTIONAL,
	servedMSISDN					[22] MSISDN OPTIONAL,
	chargingCharacteristics			[23] ChargingCharacteristics,
	chChSelectionMode				[24] ChChSelectionMode OPTIONAL,
	iMSsignalingContext				[25] NULL OPTIONAL,
	servingNodePLMNIdentifier		[27] PLMN-Id OPTIONAL,
	pSFurnishChargingInformation	[28] PSFurnishChargingInformation OPTIONAL,
	servedIMEI						[29] IMEI OPTIONAL,
	rATType							[30] RATType OPTIONAL,
	mSTimeZone 						[31] MSTimeZone OPTIONAL,
	userLocationInformation			[32] OCTET STRING OPTIONAL,
	cAMELChargingInformation		[33] OCTET STRING OPTIONAL,
	listOfServiceData				[34] SEQUENCE OF ChangeOfServiceCondition OPTIONAL,
	servingNodeType					[35] SEQUENCE OF ServingNodeType,
	servedMNNAI						[36] SubscriptionID OPTIONAL,
	p-GWPLMNIdentifier				[37] PLMN-Id OPTIONAL,
	startTime						[38] TimeStamp OPTIONAL,
	stopTime						[39] TimeStamp OPTIONAL,
	served3gpp2MEID					[40] OCTET STRING OPTIONAL,
	pDNConnectionChargingID			[41] ChargingID OPTIONAL,
	iMSIunauthenticatedFlag 		[42] NULL OPTIONAL,
	userCSGInformation				[43] UserCSGInformation OPTIONAL,
	threeGPP2UserLocationInformation	[44] OCTET STRING OPTIONAL,
	servedPDPPDNAddressExt 				[45] PDPAddress OPTIONAL,
	lowPriorityIndicator				[46] NULL OPTIONAL,
	dynamicAddressFlagExt				[47] DynamicAddressFlag OPTIONAL,
	servingNodeiPv6Address				[49] SEQUENCE OF GSNAddress OPTIONAL,
	p-GWiPv6AddressUsed					[50] GSNAddress OPTIONAL,
	tWANUserLocationInformation			[51] TWANUserLocationInfo OPTIONAL,
	retransmission   					[52] NULL OPTIONAL,
	userLocationInfoTime				[53] TimeStamp OPTIONAL,
	cNOperatorSelectionEnt		    	[54] CNOperatorSelectionEntity OPTIONAL,
	ePCQoSInformation					[55] EPCQoSInformation OPTIONAL,
	presenceReportingAreaInfo			[56] PresenceReportingAreaInfo OPTIONAL,
	lastUserLocationInformation			[57] OCTET STRING OPTIONAL,
	lastMSTimeZone						[58] MSTimeZone OPTIONAL, 
	enhancedDiagnostics					[59] EnhancedDiagnostics OPTIONAL,
	nBIFOMMode							[60] NBIFOMMode OPTIONAL,
	nBIFOMSupport						[61] NBIFOMSupport OPTIONAL,
	uWANUserLocationInformation			[62] UWANUserLocationInfo OPTIONAL,
	sGiPtPTunnellingMethod				[64] SGiPtPTunnellingMethod OPTIONAL,
	uNIPDUCPOnlyFlag					[65] UNIPDUCPOnlyFlag OPTIONAL, 
	servingPLMNRateControl				[66] ServingPLMNRateControl OPTIONAL,
	aPNRateControl						[67] APNRateControl OPTIONAL,
	pDPPDNTypeExtension					[68] PDPPDNTypeExtension OPTIONAL,
	mOExceptionDataCounter				[69] MOExceptionDataCounter OPTIONAL,
	chargingPerIPCANSessionIndicator    [70] ChargingPerIPCANSessionIndicator OPTIONAL,
	threeGPPPSDataOffStatus				[71] ThreeGPPPSDataOffStatus OPTIONAL,
	sCSASAddress						[72] SCSASAddress OPTIONAL,
	listOfRANSecondaryRATUsageReports	[73] SEQUENCE OF RANSecondaryRATUsageReport OPTIONAL
}

TDFRecord 	::= SET
{
	recordType						[0] RecordType,
	servedIMSI						[3] IMSI OPTIONAL,
	p-GWAddress						[4] GSNAddress,
	servingNodeAddress				[6] SEQUENCE OF GSNAddress,
	accessPointNameNI				[7] AccessPointNameNI OPTIONAL,
	pdpPDNType						[8] PDPType OPTIONAL,
	servedPDPPDNAddress				[9] PDPAddress OPTIONAL,
	dynamicAddressFlag				[11] DynamicAddressFlag OPTIONAL,
	recordOpeningTime				[13] TimeStamp,
	duration						[14] CallDuration,
	causeForRecClosing				[15] CauseForRecClosing,
	diagnostics						[16] Diagnostics OPTIONAL,
	recordSequenceNumber			[17] INTEGER OPTIONAL,
	nodeID							[18] NodeID OPTIONAL,
	recordExtensions				[19] ManagementExtensions OPTIONAL,
	localSequenceNumber				[20] LocalSequenceNumber OPTIONAL,
	apnSelectionMode				[21] APNSelectionMode OPTIONAL,
	servedMSISDN					[22] MSISDN OPTIONAL,
	chargingCharacteristics			[23] ChargingCharacteristics,
	chChSelectionMode				[24] ChChSelectionMode OPTIONAL,
	servingNodePLMNIdentifier		[27] PLMN-Id OPTIONAL,
	pSFurnishChargingInformation	[28] PSFurnishChargingInformation OPTIONAL,
	servedIMEI						[29] IMEI OPTIONAL,
	rATType							[30] RATType OPTIONAL,
	mSTimeZone 						[31] MSTimeZone OPTIONAL,
	userLocationInformation			[32] OCTET STRING OPTIONAL,
	listOfServiceData				[34] SEQUENCE OF ChangeOfServiceCondition OPTIONAL,
	servingNodeType					[35] SEQUENCE OF ServingNodeType,
	servedMNNAI						[36] SubscriptionID OPTIONAL,
	p-GWPLMNIdentifier				[37] PLMN-Id OPTIONAL,
	startTime						[38] TimeStamp OPTIONAL,
	stopTime						[39] TimeStamp OPTIONAL,
	served3gpp2MEID					[40] OCTET STRING OPTIONAL,
	pDNConnectionChargingID			[41] ChargingID,
	userCSGInformation				[43] UserCSGInformation OPTIONAL,
	threeGPP2UserLocationInformation	[44] OCTET STRING OPTIONAL,
	servedPDPPDNAddressExt 				[45] PDPAddress OPTIONAL,
	dynamicAddressFlagExt				[47] DynamicAddressFlag OPTIONAL,
	servingNodeiPv6Address				[49] SEQUENCE OF GSNAddress OPTIONAL,
	p-GWiPv6AddressUsed					[50] GSNAddress OPTIONAL,
	tWANUserLocationInformation			[51] TWANUserLocationInfo OPTIONAL,
	retransmission   					[52] NULL OPTIONAL,
	tDFAddress							[53] GSNAddress,
	tDFiPv6AddressUsed					[54] GSNAddress OPTIONAL,
	tDFPLMNIdentifier					[55] PLMN-Id OPTIONAL,
	servedFixedSubsID					[56] FixedSubsID OPTIONAL,
	accessLineIdentifier				[57] AccessLineIdentifier OPTIONAL,
	fixedUserLocationInformation		[59] FixedUserLocationInformation OPTIONAL
}

IPERecord 	::= SET
{
	recordType						[0] RecordType,
	servedIMSI						[3] IMSI OPTIONAL,
	iPEdgeAddress					[4] GSNAddress,
	chargingID						[5] ChargingID,
	accessPointNameNI				[7] AccessPointNameNI OPTIONAL,
	iPCANsessionType				[8] PDPType OPTIONAL,
	servedIPCANsessionAddress		[9] PDPAddress OPTIONAL,
	dynamicAddressFlag				[11] DynamicAddressFlag OPTIONAL, 
	listOfTrafficVolumes			[12] SEQUENCE OF ChangeOfCharCondition OPTIONAL,
	recordOpeningTime				[13] TimeStamp,
	duration						[14] CallDuration,
	causeForRecClosing				[15] CauseForRecClosing,
	diagnostics						[16] Diagnostics OPTIONAL,
	recordSequenceNumber			[17] INTEGER OPTIONAL,
	nodeID							[18] NodeID OPTIONAL,
	recordExtensions				[19] ManagementExtensions OPTIONAL,
	localSequenceNumber				[20] LocalSequenceNumber OPTIONAL,
	servedMSISDN					[22] MSISDN OPTIONAL,
	chargingCharacteristics			[23] ChargingCharacteristics,
	chChSelectionMode				[24] ChChSelectionMode OPTIONAL,
	pSFurnishChargingInformation	[28] PSFurnishChargingInformation OPTIONAL,
	servedIMEI		   				[29] IMEI OPTIONAL,
	listOfServiceData				[34] SEQUENCE OF ChangeOfServiceCondition OPTIONAL,
	servedMNNAI						[36] SubscriptionID OPTIONAL,
	iPEdgeOperatorIdentifier		[37] PLMN-Id OPTIONAL,
	startTime						[38] TimeStamp OPTIONAL,
	stopTime						[39] TimeStamp OPTIONAL,
	servedIPCANsessionAddressExt 	[45] PDPAddress OPTIONAL,
	dynamicAddressFlagExt			[47] DynamicAddressFlag OPTIONAL,
	iPEdgeiPv6AddressUsed			[50] GSNAddress OPTIONAL,
	retransmission   				[52] NULL OPTIONAL,
	servedFixedSubsID				[55] FixedSubsID OPTIONAL,
	accessLineIdentifier			[56] AccessLineIdentifier OPTIONAL,
	fixedUserLocationInformation	[57] FixedUserLocationInformation OPTIONAL
}

EPDGRecord 	::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[3] IMSI OPTIONAL,
	ePDGAddressUsed				[4] GSNAddress,
	chargingID					[5] ChargingID,
	accessPointNameNI			[7] AccessPointNameNI OPTIONAL,
	pdpPDNType					[8] PDPType OPTIONAL,
	servedPDPPDNAddress			[9] PDPAddress OPTIONAL,
	dynamicAddressFlag			[11] DynamicAddressFlag OPTIONAL,
	listOfTrafficVolumes		[12] SEQUENCE OF ChangeOfCharCondition OPTIONAL,
	recordOpeningTime			[13] TimeStamp,
	duration					[14] CallDuration,
	causeForRecClosing			[15] CauseForRecClosing,
	diagnostics					[16] Diagnostics OPTIONAL,
	recordSequenceNumber		[17] INTEGER OPTIONAL,
	nodeID						[18] NodeID OPTIONAL,
	recordExtensions			[19] ManagementExtensions OPTIONAL,
	localSequenceNumber			[20] LocalSequenceNumber OPTIONAL,
	apnSelectionMode			[21] APNSelectionMode OPTIONAL,
	servedMSISDN				[22] MSISDN OPTIONAL,
	chargingCharacteristics		[23] ChargingCharacteristics,
	chChSelectionMode			[24] ChChSelectionMode OPTIONAL,
	iMSsignalingContext			[25] NULL OPTIONAL,
	servedIMEI					[29] IMEI OPTIONAL,
	rATType						[30] RATType OPTIONAL, 
	sGWChange					[34] SGWChange OPTIONAL,
	p-GWAddressUsed				[36] GSNAddress OPTIONAL,
	p-GWPLMNIdentifier			[37] PLMN-Id OPTIONAL,
	startTime					[38] TimeStamp OPTIONAL,
	stopTime					[39] TimeStamp OPTIONAL,
	pDNConnectionChargingID		[40] ChargingID OPTIONAL,
	servedPDPPDNAddressExt 		[43] PDPAddress OPTIONAL,
	dynamicAddressFlagExt		[47] DynamicAddressFlag OPTIONAL,
	ePDGiPv6AddressUsed			[48] GSNAddress OPTIONAL,
	p-GWiPv6AddressUsed			[50] GSNAddress OPTIONAL,
	retransmission				[51] NULL OPTIONAL,
	enhancedDiagnostics			[52] EnhancedDiagnostics OPTIONAL,
	uWANUserLocationInformation	[53] UWANUserLocationInfo OPTIONAL,
	userLocationInfoTime		[54] TimeStamp OPTIONAL,
	iMSIunauthenticatedFlag 	[55] NULL OPTIONAL
}

TWAGRecord 	::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[3] IMSI OPTIONAL,
	tWAGAddressUsed				[4] GSNAddress,
	chargingID					[5] ChargingID,
	accessPointNameNI			[7] AccessPointNameNI OPTIONAL,
	pdpPDNType					[8] PDPType OPTIONAL,
	servedPDPPDNAddress			[9] PDPAddress OPTIONAL,
	dynamicAddressFlag			[11] DynamicAddressFlag OPTIONAL,
	listOfTrafficVolumes		[12] SEQUENCE OF ChangeOfCharCondition OPTIONAL,
	recordOpeningTime			[13] TimeStamp,
	duration					[14] CallDuration,
	causeForRecClosing			[15] CauseForRecClosing,
	diagnostics					[16] Diagnostics OPTIONAL,
	recordSequenceNumber		[17] INTEGER OPTIONAL,
	nodeID						[18] NodeID OPTIONAL,
	recordExtensions			[19] ManagementExtensions OPTIONAL,
	localSequenceNumber			[20] LocalSequenceNumber OPTIONAL,
	apnSelectionMode			[21] APNSelectionMode OPTIONAL,
	servedMSISDN				[22] MSISDN OPTIONAL,
	chargingCharacteristics		[23] ChargingCharacteristics,
	chChSelectionMode			[24] ChChSelectionMode OPTIONAL,
	servedIMEI					[29] IMEI OPTIONAL,
	rATType						[30] RATType OPTIONAL, 
	sGWChange					[34] SGWChange OPTIONAL,
	p-GWAddressUsed				[36] GSNAddress OPTIONAL,
	p-GWPLMNIdentifier			[37] PLMN-Id OPTIONAL,
	startTime					[38] TimeStamp OPTIONAL,
	stopTime					[39] TimeStamp OPTIONAL,
	pDNConnectionChargingID		[40] ChargingID OPTIONAL,
	servedPDPPDNAddressExt 		[43] PDPAddress OPTIONAL,
	dynamicAddressFlagExt		[47] DynamicAddressFlag OPTIONAL,
	tWAGiPv6AddressUsed			[48] GSNAddress OPTIONAL,
	p-GWiPv6AddressUsed			[50] GSNAddress OPTIONAL,
	retransmission				[51] NULL OPTIONAL,
	enhancedDiagnostics			[52] EnhancedDiagnostics OPTIONAL,
	tWANUserLocationInformation	[53] TWANUserLocationInfo OPTIONAL,
	iMSIunauthenticatedFlag 	[54] NULL OPTIONAL
}

SGSNMMRecord	::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[1] IMSI,
	servedIMEI					[2] IMEI OPTIONAL,
	sgsnAddress					[3] GSNAddress OPTIONAL,
	msNetworkCapability			[4] MSNetworkCapability OPTIONAL,
	routingArea					[5] RoutingAreaCode OPTIONAL,
	locationAreaCode			[6] LocationAreaCode OPTIONAL,
	cellIdentifier				[7] CellId OPTIONAL,
	changeLocation				[8] SEQUENCE OF ChangeLocation OPTIONAL,
	recordOpeningTime			[9] TimeStamp,
	duration					[10] CallDuration OPTIONAL, 
	sgsnChange					[11] SGSNChange OPTIONAL,
	causeForRecClosing			[12] CauseForRecClosing,
	diagnostics					[13] Diagnostics OPTIONAL,
	recordSequenceNumber		[14] INTEGER OPTIONAL,
	nodeID						[15] NodeID OPTIONAL,
	recordExtensions			[16] ManagementExtensions OPTIONAL,
	localSequenceNumber			[17] LocalSequenceNumber OPTIONAL,
	servedMSISDN				[18] MSISDN OPTIONAL,
	chargingCharacteristics		[19] ChargingCharacteristics,	
	cAMELInformationMM 			[20] CAMELInformationMM OPTIONAL,
	rATType						[21] RATType OPTIONAL,
	chChSelectionMode			[22] ChChSelectionMode OPTIONAL,
	cellPLMNId					[23] PLMN-Id OPTIONAL,
	servingNodePLMNIdentifier	[24] PLMN-Id OPTIONAL,
	cNOperatorSelectionEnt		[25] CNOperatorSelectionEntity OPTIONAL
}

SGSNPDPRecord 	::= SET
{
	recordType					[0] RecordType,
	networkInitiation			[1] NetworkInitiatedPDPContext OPTIONAL,
	servedIMSI					[3] IMSI OPTIONAL,
	servedIMEI					[4] IMEI OPTIONAL,
	sgsnAddress					[5] GSNAddress OPTIONAL,
	msNetworkCapability			[6] MSNetworkCapability OPTIONAL,
	routingArea					[7] RoutingAreaCode OPTIONAL,
	locationAreaCode			[8] LocationAreaCode OPTIONAL,
	cellIdentifier				[9] CellId OPTIONAL,
	chargingID					[10] ChargingID,
	ggsnAddressUsed				[11] GSNAddress,
	accessPointNameNI			[12] AccessPointNameNI OPTIONAL,
	pdpType						[13] PDPType OPTIONAL,
	servedPDPAddress			[14] PDPAddress OPTIONAL,
	listOfTrafficVolumes		[15] SEQUENCE OF ChangeOfCharCondition OPTIONAL,
	recordOpeningTime			[16] TimeStamp,
	duration					[17] CallDuration,
	sgsnChange					[18] SGSNChange OPTIONAL,
	causeForRecClosing			[19] CauseForRecClosing,
	diagnostics					[20] Diagnostics OPTIONAL,
	recordSequenceNumber		[21] INTEGER OPTIONAL,
	nodeID						[22] NodeID OPTIONAL,
	recordExtensions			[23] ManagementExtensions OPTIONAL,
	localSequenceNumber			[24] LocalSequenceNumber OPTIONAL,
	apnSelectionMode			[25] APNSelectionMode OPTIONAL,
	accessPointNameOI			[26] AccessPointNameOI OPTIONAL,
	servedMSISDN				[27] MSISDN OPTIONAL,
	chargingCharacteristics		[28] ChargingCharacteristics,
	rATType						[29] RATType OPTIONAL,
	cAMELInformationPDP  		[30] CAMELInformationPDP OPTIONAL,
	rNCUnsentDownlinkVolume		[31] DataVolumeGPRS OPTIONAL,
	chChSelectionMode			[32] ChChSelectionMode OPTIONAL,
	dynamicAddressFlag			[33] DynamicAddressFlag OPTIONAL,
	iMSIunauthenticatedFlag 	[34] NULL OPTIONAL,
	userCSGInformation			[35] UserCSGInformation OPTIONAL,
	servedPDPPDNAddressExt 		[36] PDPAddress OPTIONAL,
	lowPriorityIndicator		[37] NULL OPTIONAL,
	servingNodePLMNIdentifier	[38] PLMN-Id OPTIONAL,
	cNOperatorSelectionEnt		[39] CNOperatorSelectionEntity OPTIONAL
}

SGSNSMORecord	::= SET
--
--   also for MME UE originated SMS record
--
{
	recordType					[0] RecordType,
	servedIMSI					[1] IMSI,
	servedIMEI					[2] IMEI OPTIONAL,
	servedMSISDN				[3] MSISDN OPTIONAL,
	msNetworkCapability			[4] MSNetworkCapability OPTIONAL,
	serviceCentre				[5] AddressString OPTIONAL,
	recordingEntity				[6] RecordingEntity OPTIONAL,
	locationArea				[7] LocationAreaCode OPTIONAL,
	routingArea					[8] RoutingAreaCode OPTIONAL,
	cellIdentifier				[9] CellId OPTIONAL,
	messageReference			[10] MessageReference,
	eventTimeStamp				[11] TimeStamp,
	smsResult					[12] SMSResult OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL,
	nodeID						[14] NodeID OPTIONAL,
	localSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	chargingCharacteristics		[16] ChargingCharacteristics,
	rATType						[17] RATType OPTIONAL,
	destinationNumber			[18] SmsTpDestinationNumber OPTIONAL,
	cAMELInformationSMS			[19] CAMELInformationSMS OPTIONAL,
	chChSelectionMode			[20] ChChSelectionMode OPTIONAL,
	servingNodeType				[21] ServingNodeType,
	servingNodeAddress			[22] GSNAddress OPTIONAL,
	servingNodeiPv6Address		[23] GSNAddress OPTIONAL,
	mMEName						[24] DiameterIdentity OPTIONAL,
	mMERealm					[25] DiameterIdentity OPTIONAL,
	userLocationInformation		[26] OCTET STRING OPTIONAL,
	retransmission				[27] NULL OPTIONAL,
	servingNodePLMNIdentifier	[28] PLMN-Id OPTIONAL,
	userLocationInfoTime		[29] TimeStamp OPTIONAL,
	cNOperatorSelectionEnt		[30] CNOperatorSelectionEntity OPTIONAL
}

SGSNSMTRecord	::= SET
--
--   also for MME UE terminated SMS record
--
{
	recordType					 [0] RecordType,
	servedIMSI					 [1] IMSI,
	servedIMEI					 [2] IMEI OPTIONAL,
	servedMSISDN				 [3] MSISDN OPTIONAL,
	msNetworkCapability			 [4] MSNetworkCapability OPTIONAL,
	serviceCentre				 [5] AddressString OPTIONAL,
	recordingEntity				 [6] RecordingEntity OPTIONAL,
	locationArea				 [7] LocationAreaCode OPTIONAL,
	routingArea					 [8] RoutingAreaCode OPTIONAL,
	cellIdentifier				 [9] CellId OPTIONAL,
	eventTimeStamp				 [10] TimeStamp,
	smsResult					 [11] SMSResult OPTIONAL,
	recordExtensions			 [12] ManagementExtensions OPTIONAL,
	nodeID						 [13] NodeID OPTIONAL,
	localSequenceNumber			 [14] LocalSequenceNumber OPTIONAL,
	chargingCharacteristics		 [15] ChargingCharacteristics,
	rATType						 [16] RATType OPTIONAL,
	chChSelectionMode			 [17] ChChSelectionMode OPTIONAL,
	cAMELInformationSMS			 [18] CAMELInformationSMS OPTIONAL,
	originatingAddress			 [19] AddressString OPTIONAL,
	servingNodeType				 [20] ServingNodeType,
	servingNodeAddress			 [21] GSNAddress OPTIONAL,
	servingNodeiPv6Address		 [22] GSNAddress OPTIONAL,
	mMEName						 [23] DiameterIdentity OPTIONAL,
	mMERealm					 [24] DiameterIdentity OPTIONAL,
	userLocationInformation		 [25] OCTET STRING OPTIONAL,
	retransmission				 [26] NULL OPTIONAL,
	servingNodePLMNIdentifier	 [27] PLMN-Id OPTIONAL,
	userLocationInfoTime		 [28] TimeStamp OPTIONAL,
	cNOperatorSelectionEnt		 [29] CNOperatorSelectionEntity OPTIONAL
}

SGSNMTLCSRecord			::= SET
{
	recordType					 [0] RecordType,
	recordingEntity				 [1] RecordingEntity,
	lcsClientType				 [2] LCSClientType,
	lcsClientIdentity			 [3] LCSClientIdentity,
	servedIMSI					 [4] IMSI,
	servedMSISDN				 [5] MSISDN OPTIONAL,
	sgsnAddress					 [6] GSNAddress OPTIONAL,
	locationType				 [7] LocationType,
	lcsQos						 [8] LCSQoSInfo OPTIONAL,
	lcsPriority					 [9] LCS-Priority OPTIONAL,
	mlcNumber					 [10] ISDN-AddressString,
	eventTimeStamp				 [11] TimeStamp,
	measurementDuration			 [12] CallDuration OPTIONAL,
	notificationToMSUser		 [13] NotificationToMSUser OPTIONAL,
	privacyOverride				 [14] NULL OPTIONAL,
	location					 [15] LocationAreaAndCell OPTIONAL,
	routingArea					 [16] RoutingAreaCode OPTIONAL,
	locationEstimate			 [17] Ext-GeographicalInformation OPTIONAL,
	positioningData				 [18] PositioningData OPTIONAL,
	lcsCause					 [19] LCSCause OPTIONAL,
	diagnostics					 [20] Diagnostics OPTIONAL,
	nodeID						 [21] NodeID OPTIONAL,
	localSequenceNumber			 [22] LocalSequenceNumber OPTIONAL,
	chargingCharacteristics		 [23] ChargingCharacteristics,
	chChSelectionMode			 [24] ChChSelectionMode OPTIONAL,
	rATType						 [25] RATType OPTIONAL,
	recordExtensions			 [26] ManagementExtensions OPTIONAL,
	causeForRecClosing			 [27] CauseForRecClosing,
	servingNodePLMNIdentifier	 [28] PLMN-Id OPTIONAL,
	cNOperatorSelectionEnt		 [29] CNOperatorSelectionEntity OPTIONAL
}

SGSNMOLCSRecord			::= SET
{
	recordType					 [0] RecordType,
	recordingEntity				 [1] RecordingEntity,
	lcsClientType				 [2] LCSClientType OPTIONAL,
	lcsClientIdentity			 [3] LCSClientIdentity OPTIONAL,
	servedIMSI					 [4] IMSI,
	servedMSISDN				 [5] MSISDN OPTIONAL,
	sgsnAddress					 [6] GSNAddress OPTIONAL,
	locationMethod				 [7] LocationMethod,
	lcsQos						 [8] LCSQoSInfo OPTIONAL,
	lcsPriority					 [9] LCS-Priority OPTIONAL,
	mlcNumber					 [10] ISDN-AddressString OPTIONAL,
	eventTimeStamp				 [11] TimeStamp,
	measurementDuration			 [12] CallDuration OPTIONAL,
	location					 [13] LocationAreaAndCell OPTIONAL,
	routingArea					 [14] RoutingAreaCode OPTIONAL,
	locationEstimate			 [15] Ext-GeographicalInformation OPTIONAL,
	positioningData				 [16] PositioningData OPTIONAL,
	lcsCause					 [17] LCSCause OPTIONAL,
	diagnostics					 [18] Diagnostics OPTIONAL,
	nodeID						 [19] NodeID OPTIONAL,
	localSequenceNumber			 [20] LocalSequenceNumber OPTIONAL,
	chargingCharacteristics		 [21] ChargingCharacteristics,
	chChSelectionMode			 [22] ChChSelectionMode OPTIONAL,
	rATType						 [23] RATType OPTIONAL,
	recordExtensions			 [24] ManagementExtensions OPTIONAL,
	causeForRecClosing			 [25] CauseForRecClosing,
	servingNodePLMNIdentifier	 [26] PLMN-Id OPTIONAL,
	cNOperatorSelectionEnt		 [27] CNOperatorSelectionEntity OPTIONAL
}

SGSNNILCSRecord			::= SET
{
	recordType					 [0] RecordType,
	recordingEntity				 [1] RecordingEntity,
	lcsClientType				 [2] LCSClientType OPTIONAL,
	lcsClientIdentity			 [3] LCSClientIdentity OPTIONAL,
	servedIMSI					 [4] IMSI OPTIONAL,
	servedMSISDN				 [5] MSISDN OPTIONAL,
	sgsnAddress					 [6] GSNAddress OPTIONAL,
	servedIMEI					 [7] IMEI OPTIONAL,
	lcsQos						 [8] LCSQoSInfo OPTIONAL,
	lcsPriority					 [9] LCS-Priority OPTIONAL,
	mlcNumber					 [10] ISDN-AddressString OPTIONAL,
	eventTimeStamp				 [11] TimeStamp,
	measurementDuration			 [12] CallDuration OPTIONAL,
	location					 [13] LocationAreaAndCell OPTIONAL,
	routingArea					 [14] RoutingAreaCode OPTIONAL,
	locationEstimate			 [15] Ext-GeographicalInformation OPTIONAL,
	positioningData				 [16] PositioningData OPTIONAL,
	lcsCause					 [17] LCSCause OPTIONAL,
	diagnostics					 [18] Diagnostics OPTIONAL,
	nodeID						 [19] NodeID OPTIONAL,
	localSequenceNumber			 [20] LocalSequenceNumber OPTIONAL,
	chargingCharacteristics		 [21] ChargingCharacteristics,
	chChSelectionMode			 [22] ChChSelectionMode OPTIONAL,
	rATType						 [23] RATType OPTIONAL,
	recordExtensions			 [24] ManagementExtensions OPTIONAL,
	causeForRecClosing			 [25] CauseForRecClosing,
	servingNodePLMNIdentifier	 [26] PLMN-Id OPTIONAL,
	cNOperatorSelectionEnt		 [27] CNOperatorSelectionEntity OPTIONAL
}

SGSNMBMSRecord	::= SET
{
	recordType					[0] RecordType,
	ggsnAddress					[1] GSNAddress,
	chargingID					[2] ChargingID,
	listofRAs					[3] SEQUENCE OF RAIdentity OPTIONAL,
	accessPointNameNI			[4] AccessPointNameNI OPTIONAL,
	servedPDPAddress			[5] PDPAddress OPTIONAL,
	listOfTrafficVolumes		[6] SEQUENCE OF ChangeOfMBMSCondition OPTIONAL,
	recordOpeningTime			[7] TimeStamp,
	duration					[8] CallDuration,
	causeForRecClosing			[9] CauseForRecClosing,
	diagnostics					[10] Diagnostics OPTIONAL,
	recordSequenceNumber		[11] INTEGER OPTIONAL,
	nodeID						[12] NodeID OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL,
	localSequenceNumber			[14] LocalSequenceNumber OPTIONAL,
	sgsnPLMNIdentifier			[15] PLMN-Id OPTIONAL,
	numberofReceivingUE			[16] INTEGER OPTIONAL,
	mbmsInformation				[17] MBMSInformation OPTIONAL
}

GGSNMBMSRecord	::= SET
{
	recordType					[0] RecordType,
	ggsnAddress					[1] GSNAddress,
	chargingID					[2] ChargingID,
	listofDownstreamNodes		[3] SEQUENCE OF GSNAddress,
	accessPointNameNI			[4] AccessPointNameNI OPTIONAL,
	servedPDPAddress			[5] PDPAddress OPTIONAL,
	listOfTrafficVolumes		[6] SEQUENCE OF ChangeOfMBMSCondition OPTIONAL,
	recordOpeningTime			[7] TimeStamp,
	duration					[8] CallDuration,
	causeForRecClosing			[9] CauseForRecClosing,
	diagnostics					[10] Diagnostics OPTIONAL,
	recordSequenceNumber		[11] INTEGER OPTIONAL,
	nodeID						[12] NodeID OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL,
	localSequenceNumber			[14] LocalSequenceNumber OPTIONAL,
	mbmsInformation				[15] MBMSInformation OPTIONAL
}

GWMBMSRecord	::= SET
{
	recordType					[0] RecordType,
	mbmsGWAddress				[1] GSNAddress,
	chargingID					[2] ChargingID,
	listofDownstreamNodes		[3] SEQUENCE OF GSNAddress,
	accessPointNameNI			[4] AccessPointNameNI OPTIONAL,
	pdpPDNType					[5] PDPType OPTIONAL,
	servedPDPPDNAddress			[6] PDPAddress OPTIONAL,
	listOfTrafficVolumes		[7] SEQUENCE OF ChangeOfMBMSCondition OPTIONAL,
	recordOpeningTime			[8] TimeStamp,
	duration					[9] CallDuration,
	causeForRecClosing			[10] CauseForRecClosing,
	diagnostics					[11] Diagnostics OPTIONAL,
	recordSequenceNumber		[12] INTEGER OPTIONAL,
	nodeID						[13] NodeID OPTIONAL,
	recordExtensions			[14] ManagementExtensions OPTIONAL,
	localSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	mbmsInformation				[16] MBMSInformation OPTIONAL,
	commonTeid   				[17] CTEID OPTIONAL,
	iPMulticastSourceAddress	[18] PDPAddress OPTIONAL
}

--
--  PS DATA TYPES
--


AccessAvailabilityChangeReason		::= INTEGER (0..4294967295)
--
-- 0 (RAN rule indication)   : This value shall be used to indicate that the availability
--                             of an access is changed due to the RAN rule indication.
-- 1 (Access usable/unusable): This value shall be used to indicate that the availability
--                             of an access is changed due to the access is unusable or usable
--                             again.
--

AccessLineIdentifier	::= SEQUENCE
--
-- "Physical Access Id" includes a port identifier and the identity of the access node where the 
--  port resides. "logical Access Id" contains a Circuit‑ID. Both are defined ETSI TS 283 034 [314]   
--
{
	physicalAccessID	[0] UTF8String OPTIONAL,
	logicalAccessID		[1] OCTET STRING OPTIONAL
}

AccessPointNameNI	::= IA5String (SIZE(1..63))
--
-- Network Identifier part of APN in  dot representation.
-- For example, if the complete APN is 'apn1a.apn1b.apn1c.mnc022.mcc111.gprs'
-- NI is 'apn1a.apn1b.apn1c' and is presented in this form in the CDR.
--

AccessPointNameOI	::= IA5String (SIZE(1..37))
--
-- Operator Identifier part of APN in dot representation.
-- In the 'apn1a.apn1b.apn1c.mnc022.mcc111.gprs' example, the OI portion is 'mnc022.mcc111.gprs'
-- and is presented in this form in the CDR.
--

ADCRuleBaseName		::= IA5String
-- 
-- identifier for the group of charging rules
-- see ADC-Rule-Base-Name AVP as desined in TS 29.212 [220]
--
AdditionalExceptionReports		::= ENUMERATED
{
	notAllowed		(0),
	allowed			(1)
}


AFChargingIdentifier	::= OCTET STRING
--
-- see AF-Charging-Identifier AVP as defined in TS 29.214[221]
--
AFRecordInformation	::= SEQUENCE
{
	aFChargingIdentifier		[1] AFChargingIdentifier,
	flows						[2] Flows OPTIONAL
}


APNRateControl		::= SEQUENCE
--
-- See TS 24.008 [208] for more information
-- 
{
	aPNRateControlUplink	[0] APNRateControlParameters OPTIONAL,
	aPNRateControlDownlink	[1] APNRateControlParameters OPTIONAL
}

APNRateControlParameters		::= SEQUENCE
{
	additionalExceptionReports	[0] AdditionalExceptionReports OPTIONAL,
	rateControlTimeUnit			[1] RateControlTimeUnit OPTIONAL,
	rateControlMaxRate			[2] INTEGER OPTIONAL,
	rateControlMaxMessageSize	[3] DataVolumeGPRS OPTIONAL -- aPNRateControlDownlink only
}


APNSelectionMode	::= ENUMERATED
--
-- See Information Elements TS 29.060 [215], TS 29.274 [223] or TS 29.275 [224]
--
{
	mSorNetworkProvidedSubscriptionVerified				(0),
	mSProvidedSubscriptionNotVerified					(1),
	networkProvidedSubscriptionNotVerified				(2)
}

CalleePartyInformation	::= SEQUENCE
{
called-Party-Address				[0] InvolvedParty OPTIONAL,
requested-Party-Address				[1] InvolvedParty OPTIONAL,
list-Of-Called-Asserted-Identity 	[2] SEQUENCE OF InvolvedParty OPTIONAL
}

CAMELAccessPointNameNI	::= AccessPointNameNI

CAMELAccessPointNameOI	::= AccessPointNameOI

CAMELInformationMM		::= SET
{
	sCFAddress						[1] SCFAddress OPTIONAL,
	serviceKey						[2] ServiceKey OPTIONAL,
	defaultTransactionHandling		[3] DefaultGPRS-Handling OPTIONAL,
	numberOfDPEncountered  			[4] NumberOfDPEncountered OPTIONAL,
	levelOfCAMELService				[5] LevelOfCAMELService OPTIONAL,
	freeFormatData					[6] FreeFormatData OPTIONAL,
	fFDAppendIndicator				[7] FFDAppendIndicator OPTIONAL
}

CAMELInformationPDP	::= SET
{
	sCFAddress						[1] SCFAddress OPTIONAL,
	serviceKey						[2] ServiceKey OPTIONAL,
	defaultTransactionHandling		[3] DefaultGPRS-Handling OPTIONAL,
	cAMELAccessPointNameNI			[4] CAMELAccessPointNameNI OPTIONAL,
	cAMELAccessPointNameOI			[5] CAMELAccessPointNameOI OPTIONAL,
	numberOfDPEncountered			[6] NumberOfDPEncountered OPTIONAL,
	levelOfCAMELService				[7] LevelOfCAMELService OPTIONAL,
	freeFormatData					[8] FreeFormatData OPTIONAL,
	fFDAppendIndicator				[9] FFDAppendIndicator OPTIONAL
}

CAMELInformationSMS		::= SET 
{
	sCFAddress								[1] SCFAddress OPTIONAL,
	serviceKey								[2] ServiceKey OPTIONAL,
	defaultSMSHandling						[3] DefaultSMS-Handling OPTIONAL,
	cAMELCallingPartyNumber					[4] CallingNumber OPTIONAL,
	cAMELDestinationSubscriberNumber		[5] SmsTpDestinationNumber OPTIONAL,
	cAMELSMSCAddress						[6] AddressString OPTIONAL,
	freeFormatData							[7] FreeFormatData OPTIONAL,
	smsReferenceNumber						[8] CallReferenceNumber	OPTIONAL
}

ChangeCondition	::= ENUMERATED
{
	qoSChange						(0),
	tariffTime						(1),
	recordClosure					(2),
	cGI-SAICHange					(6),	-- bearer modification. "CGI-SAI Change"
	rAIChange						(7),	-- bearer modification. "RAI Change"
	dT-Establishment				(8),
	dT-Removal						(9),
	eCGIChange						(10),	-- bearer modification. "ECGI Change"
	tAIChange						(11),	-- bearer modification. "TAI Change"
	userLocationChange				(12),	-- bearer modification. "User Location Change"
	userCSGInformationChange		(13), 	-- bearer modification. "User CSG info Change"
	presenceInPRAChange				(14),	-- bearer modification. "Change of UE Presence
													-- in Presence Reporting Area"
	removalOfAccess					(15),	-- NBIFOM "Removal of Access"
	unusabilityOfAccess				(16),	-- NBIFOM "Unusability of Access"
	indirectChangeCondition			(17),	-- NBIFOM "Indirect Change Condition"
	userPlaneToUEChange				(18),	-- bearer modification. "Change of user plane to UE"	
	servingPLMNRateControlChange	(19), 	
-- bearer modification “Serving PLMN Rate Control Change"
	threeGPPPSDataOffStatusChange	(20),   -- "Change of 3GPP PS DataO ff Status"
	aPNRateControlChange			(21)	-- bearer modification. "APN Rate ControlChange"


}

ChangeOfCharCondition	::= SEQUENCE
--
-- qosRequested and qosNegotiated are used in S-CDR only
-- ePCQoSInformation used in SGW-CDR,PGW-CDR, IPE-CDR, TWAG-CDR and ePDG-CDR only
-- userLocationInformation is used only in S-CDR, SGW-CDR and PGW-CDR
-- chargingID used in PGW-CDR only when Charging per IP-CAN session is active
-- accessAvailabilityChangeReason and relatedChangeOfCharCondition applicable only in PGW-CDR
-- cPCIoTOptimisationIndicator is used in SGW-CDR only
-- aPNRateControl is valid for PGW-CDR only

--
{
	qosRequested					[1] QoSInformation OPTIONAL,
	qosNegotiated							[2] QoSInformation OPTIONAL,
	dataVolumeGPRSUplink					[3] DataVolumeGPRS OPTIONAL,
	dataVolumeGPRSDownlink					[4] DataVolumeGPRS OPTIONAL,
	changeCondition							[5] ChangeCondition,
	changeTime								[6] TimeStamp,
	userLocationInformation					[8] OCTET STRING OPTIONAL,
	ePCQoSInformation						[9] EPCQoSInformation OPTIONAL,
	chargingID								[10] ChargingID OPTIONAL,
	presenceReportingAreaStatus 			[11] PresenceReportingAreaStatus OPTIONAL,
	userCSGInformation						[12] UserCSGInformation OPTIONAL,
	diagnostics								[13] Diagnostics OPTIONAL,
	enhancedDiagnostics						[14] EnhancedDiagnostics OPTIONAL,
	rATType									[15] RATType OPTIONAL,
	accessAvailabilityChangeReason			[16] AccessAvailabilityChangeReason OPTIONAL,
	uWANUserLocationInformation				[17] UWANUserLocationInfo OPTIONAL,
	relatedChangeOfCharCondition			[18] RelatedChangeOfCharCondition OPTIONAL,
	cPCIoTEPSOptimisationIndicator			[19] CPCIoTEPSOptimisationIndicator OPTIONAL,
	servingPLMNRateControl					[20] ServingPLMNRateControl OPTIONAL,
	threeGPPPSDataOffStatus					[21] ThreeGPPPSDataOffStatus OPTIONAL,
	listOfPresenceReportingAreaInformation	[22] SEQUENCE OF PresenceReportingAreaInfo OPTIONAL,
	aPNRateControl							[23] APNRateControl OPTIONAL


}

ChangeOfMBMSCondition	::= SEQUENCE
--
-- Used in MBMS record
--
{
	qosRequested				[1] QoSInformation OPTIONAL,
	qosNegotiated				[2] QoSInformation OPTIONAL,
	dataVolumeMBMSUplink		[3] DataVolumeMBMS OPTIONAL,
	dataVolumeMBMSDownlink		[4] DataVolumeMBMS,
	changeCondition				[5] ChangeCondition,
	changeTime					[6] TimeStamp,
	failureHandlingContinue		[7] FailureHandlingContinue OPTIONAL
}

ChangeOfServiceCondition	::= SEQUENCE
--
-- Used for Flow based Charging and Application based Charging service data container
-- presenceReportingAreaStatus is used in PGW-CDR Only
--
{
	ratingGroup 						[1] RatingGroupId,
	chargingRuleBaseName				[2] ChargingRuleBaseName OPTIONAL,
	resultCode							[3] ResultCode OPTIONAL,
	localSequenceNumber					[4] LocalSequenceNumber OPTIONAL,
	timeOfFirstUsage					[5] TimeStamp OPTIONAL,
	timeOfLastUsage						[6] TimeStamp OPTIONAL,
	timeUsage 							[7] CallDuration OPTIONAL,
	serviceConditionChange				[8] ServiceConditionChange,
	qoSInformationNeg					[9] EPCQoSInformation OPTIONAL,
	servingNodeAddress 					[10] GSNAddress OPTIONAL,
	datavolumeFBCUplink					[12] DataVolumeGPRS OPTIONAL,
	datavolumeFBCDownlink				[13] DataVolumeGPRS OPTIONAL,
	timeOfReport						[14] TimeStamp,
	failureHandlingContinue				[16] FailureHandlingContinue OPTIONAL,
	serviceIdentifier					[17] ServiceIdentifier OPTIONAL,
	pSFurnishChargingInformation		[18] PSFurnishChargingInformation OPTIONAL,
	aFRecordInformation					[19] SEQUENCE OF AFRecordInformation OPTIONAL,
	userLocationInformation				[20] OCTET STRING OPTIONAL,
	eventBasedChargingInformation		[21] EventBasedChargingInformation OPTIONAL,
	timeQuotaMechanism					[22] TimeQuotaMechanism OPTIONAL,
	serviceSpecificInfo					[23] SEQUENCE OF ServiceSpecificInfo OPTIONAL,
	threeGPP2UserLocationInformation	[24] OCTET STRING OPTIONAL,
	sponsorIdentity						[25] OCTET STRING OPTIONAL,
	applicationServiceProviderIdentity	[26] OCTET STRING OPTIONAL,
	aDCRuleBaseName						[27] ADCRuleBaseName OPTIONAL,
	presenceReportingAreaStatus 		[28] PresenceReportingAreaStatus OPTIONAL,
	userCSGInformation					[29] UserCSGInformation OPTIONAL,
	rATType								[30] RATType OPTIONAL,
	uWANUserLocationInformation			[32] UWANUserLocationInfo OPTIONAL,
	relatedChangeOfServiceCondition		[33] RelatedChangeOfServiceCondition OPTIONAL,
	servingPLMNRateControl				[35] ServingPLMNRateControl OPTIONAL,
	aPNRateControl						[36] APNRateControl OPTIONAL, 
	threeGPPPSDataOffStatus             [37] ThreeGPPPSDataOffStatus OPTIONAL,
	trafficSteeringPolicyIDDownlink     [38] TrafficSteeringPolicyIDDownlink OPTIONAL,
trafficSteeringPolicyIDUplink       [39] TrafficSteeringPolicyIDUplink OPTIONAL,
	tWANUserLocationInformation			[40] TWANUserLocationInfo OPTIONAL,
	listOfPresenceReportingAreaInformation	[41] SEQUENCE OF PresenceReportingAreaInfo OPTIONAL,
	voLTEInformation						[42] VoLTEInformation OPTIONAL

}

ChangeLocation	::= SEQUENCE
--
-- used in SGSNMMRecord only
--
{
	locationAreaCode		[0] LocationAreaCode,
	routingAreaCode			[1] RoutingAreaCode,
	cellId					[2] CellId OPTIONAL,
	changeTime				[3] TimeStamp,
	mCC-MNC					[4] PLMN-Id OPTIONAL
}

ChargingCharacteristics	::= OCTET STRING (SIZE(2))


ChargingPerIPCANSessionIndicator	::= ENUMERATED
{
	inactive		(0),	
	active               (1)
} 

ChargingRuleBaseName	::= IA5String
-- 
-- identifier for the group of charging rules
-- see Charging-Rule-Base-Name AVP as desined in TS 29.212 [220]
--

ChChSelectionMode		::= ENUMERATED
{
	servingNodeSupplied			(0),	-- For S-GW/P-GW
	subscriptionSpecific		(1),	-- For SGSN only
	aPNSpecific					(2),	-- For SGSN only
	homeDefault					(3),	-- For SGSN, S-GW, P-GW, TDF and IP-Edge
	roamingDefault				(4),	-- For SGSN, S-GW, P-GW, TDF and IP-Edge
	visitingDefault				(5),	-- For SGSN, S-GW, P-GW, TDF and IP-Edge
	fixedDefault				(6)		-- For TDF and IP-Edge 
}

CNOperatorSelectionEntity	::= ENUMERATED
{
	servCNSelectedbyUE		(0),
	servCNSelectedbyNtw		(1)
}

CPCIoTEPSOptimisationIndicator ::= BOOLEAN

CSGAccessMode		::= ENUMERATED 
{
	closedMode  (0),
	hybridMode  (1)
}

CSGId		::= OCTET STRING (SIZE(4))
--
-- Defined in TS 23.003 [200]. Coded according to TS 29.060 [215] for GTP, and
-- in TS 29.274 [223] for eGTP.  
--

CTEID		::= OCTET STRING (SIZE(4))
--
-- Defined in TS 32.251[11] for MBMS-GW-CDR. Common Tunnel Endpoint Identifier
-- of MBMS GW for user plane, defined in TS 23.246 [207].
--

DataVolumeGPRS		::= INTEGER
--
-- The volume of data transferred in octets.
--

DataVolumeMBMS ::= INTEGER
--
-- The volume of data transferred in octets.
--


EPCQoSInformation	::= SEQUENCE
--
-- See TS 29.212 [220] for more information
-- 
{
	qCI							[1] INTEGER,
	maxRequestedBandwithUL		[2] INTEGER OPTIONAL,
	maxRequestedBandwithDL		[3] INTEGER OPTIONAL,
	guaranteedBitrateUL			[4] INTEGER OPTIONAL,
	guaranteedBitrateDL			[5] INTEGER OPTIONAL,
	aRP							[6] INTEGER OPTIONAL,
	aPNAggregateMaxBitrateUL	[7] INTEGER OPTIONAL,
	aPNAggregateMaxBitrateDL	[8] INTEGER OPTIONAL,
	extendedMaxRequestedBWUL	[9] INTEGER OPTIONAL,
	extendedMaxRequestedBWDL	[10] INTEGER OPTIONAL,
	extendedGBRUL				[11] INTEGER OPTIONAL,
	extendedGBRDL				[12] INTEGER OPTIONAL,
	extendedAPNAMBRUL			[13] INTEGER OPTIONAL,
	extendedAPNAMBRDL			[14] INTEGER OPTIONAL
}

EventBasedChargingInformation		::= SEQUENCE
{
	numberOfEvents		[1] INTEGER,
	eventTimeStamps  	[2] SEQUENCE OF TimeStamp OPTIONAL
}

FailureHandlingContinue		::= BOOLEAN
--
-- This parameter is included when the failure handling procedure has been executed and new 
-- containers are opened. This parameter shall be included in the first and subsequent 
-- containers opened after the failure handling execution.
--

FFDAppendIndicator	::= BOOLEAN


FixedSubsID	::= OCTET STRING
--
-- The fixed subscriber Id identifier is defined in Broadband Forum TR 134 [601].
--


FixedUserLocationInformation	::= SEQUENCE
--
-- See format in IEEE Std 802.11-2012 [408] for "SSID" and "BSSID".
--
{
	sSID					[0] OCTET STRING OPTIONAL ,
	bSSID					[1] OCTET STRING OPTIONAL,
	accessLineIdentifier	[2] AccessLineIdentifier OPTIONAL
}

Flows		::= 	SEQUENCE
--
-- See Flows AVP as defined in TS 29.214 [221]
--
{
	mediaComponentNumber	[1] INTEGER,
	flowNumber  			[2] SEQUENCE OF INTEGER OPTIONAL
}

FreeFormatData		::=	OCTET STRING (SIZE(1..160))
--
-- Free formatted data as sent in the FurnishChargingInformationGPRS 
-- see TS 29.078 [217]
--

GSNAddress		::= IPAddress


MOExceptionDataCounter		::= SEQUENCE
--
-- See TS 29.128 [244] for more information
-- 
{
	counterValue		[0] INTEGER,
	counterTimestamp	[1] TimeStamp 
}


MSNetworkCapability	::= OCTET STRING (SIZE(1..8))
--
-- see TS 24.008 [208]
--

NBIFOMMode		::= ENUMERATED
{
	uEINITIATED				(0),
	nETWORKINITIATED		(1)
}

NBIFOMSupport 	::= ENUMERATED 
{
	nBIFOMNotSupported			(0),
	nBIFOMSupported				(1)
}

NetworkInitiatedPDPContext		::= BOOLEAN
--
-- Set to true if PDP context was initiated from network side
--

NumberOfDPEncountered  ::= INTEGER
PDPType		::= OCTET STRING (SIZE(2))
--
-- OCTET 1: PDP Type Organization
-- OCTET 2: PDP/PDN Type Number
-- See TS 29.060 [215] for encoding details.
--


PDPPDNTypeExtension	::= INTEGER
--
-- This integer is 1:1 copy of the PDP type value as defined in TS 29.061 [215].
--


PresenceReportingAreaElementsList ::= OCTET STRING
--
-- For EPC see Presence-Reporting-Area-Elements-List AVP defined in TS 29.212 [220]
-- For 5GC see PresenceInfo defined in TS 29.571 [249] excluding praId and presenceState
-- 


PresenceReportingAreaInfo	::= SEQUENCE
{
	presenceReportingAreaIdentifier	 [0] OCTET STRING,
	presenceReportingAreaStatus		 [1] PresenceReportingAreaStatus OPTIONAL,
	presenceReportingAreaElementsList[2] PresenceReportingAreaElementsList OPTIONAL,
	presenceReportingAreaNode		 [3] PresenceReportingAreaNode OPTIONAL
}

PresenceReportingAreaNode ::= BIT STRING 
{
	oCS   		 (0),
	pCRF  		 (1)
}
--
--	This bit mask has the same format as Presence-Reporting-Area-Node AVP in TS 29.212 [220]
--


PresenceReportingAreaStatus ::= ENUMERATED 
{
	insideArea   (0),
	outsideArea  (1),
	inactive 	 (2),
	unknown      (3)

}

PSFurnishChargingInformation		::= SEQUENCE
{
	pSFreeFormatData		[1] FreeFormatData,
	pSFFDAppendIndicator	[2] FFDAppendIndicator OPTIONAL
}

QoSInformation	::= OCTET STRING (SIZE (4..255))
--
-- This  octet string
-- is a 1:1 copy of the contents (i.e. starting with octet 5) of the "Bearer Quality of
-- Service" information element specified in TS 29.274 [223].
--

RANSecondaryRATUsageReport	::= SEQUENCE
--
{
	dataVolumeUplink				[1] DataVolumeGPRS,
	dataVolumeDownlink				[2] DataVolumeGPRS,
	rANStartTime					[3] TimeStamp,
	rANEndTime						[4] TimeStamp,
	secondaryRATType				[5] SecondaryRATType OPTIONAL,
	chargingID						[6] ChargingID OPTIONAL
}


RateControlTimeUnit ::= INTEGER
{	unrestricted	(0),
	minute			(1),
	hour			(2),
	day				(3),
	week			(4)
}

RatingGroupId		::= INTEGER
-- 
-- IP service flow identity (DCCA), range of 4 byte (0... 4294967295)
-- see Rating-Group AVP as used in TS 32.299 [50]
--

RelatedChangeOfCharCondition	::= SEQUENCE
{
	changeCondition					[5] ChangeCondition,
	changeTime						[6] TimeStamp,
	userLocationInformation			[8] OCTET STRING OPTIONAL,
	presenceReportingAreaStatus 	[11] PresenceReportingAreaStatus OPTIONAL,
	userCSGInformation				[12] UserCSGInformation OPTIONAL,
	rATType							[15] RATType OPTIONAL,
	uWANUserLocationInformation		[17] UWANUserLocationInfo OPTIONAL
}

RelatedChangeOfServiceCondition	::= SEQUENCE
{
	userLocationInformation				[20] OCTET STRING OPTIONAL,
	threeGPP2UserLocationInformation	[24] OCTET STRING OPTIONAL,
	presenceReportingAreaStatus 		[28] PresenceReportingAreaStatus OPTIONAL,
	userCSGInformation					[29] UserCSGInformation OPTIONAL,
	rATType								[30] RATType OPTIONAL,
	uWANUserLocationInformation			[32] UWANUserLocationInfo OPTIONAL,
	relatedServiceConditionChange		[33] ServiceConditionChange OPTIONAL
}

ResultCode		::= INTEGER
-- 
-- charging protocol return value, range of 4 byte (0... 4294967295)
-- see Result-Code AVP as used in 32.299 [40]
--

SecondaryRATType	::= INTEGER
{
	nR				(0)		-- New Radio 5G
}

ServiceConditionChange	::= BIT STRING
{
	qoSChange 								 (0),	-- bearer modification
	sGSNChange 								 (1),	-- bearer modification:
													-- apply to Gn-SGSN /SGW Change
	sGSNPLMNIDChange 						 (2),	-- bearer modification
	tariffTimeSwitch 						 (3),	-- tariff time change
	pDPContextRelease 						 (4),	-- bearer release
	rATChange 								 (5),	-- bearer modification
	serviceIdledOut 						 (6),	-- IP flow idle out, DCCA QHT expiry
	reserved 								 (7),	-- old: QCTexpiry is no report event
	configurationChange 					 (8),	-- configuration change
	serviceStop 							 (9),	-- IP flow termination.From "Service Stop" in
													-- Change-Condition AVP
	dCCATimeThresholdReached 				(10),	-- DCCA quota reauthorization
	dCCAVolumeThresholdReached 				(11),	-- DCCA quota reauthorization
	dCCAServiceSpecificUnitThresholdReached	(12),	-- DCCA quota reauthorization
	dCCATimeExhausted 						(13),	-- DCCA quota reauthorization
	dCCAVolumeExhausted 					(14),	-- DCCA quota reauthorization
	dCCAValidityTimeout 					(15),	-- DCCA quota validity time (QVT expiry)
	reserved1								(16),	-- reserved due to no use case,
													-- old: return Requested is covered by (17),(18)
	dCCAReauthorisationRequest 				(17),	-- DCCA quota reauthorization request by OCS
	dCCAContinueOngoingSession 				(18),	-- DCCA failure handling (CCFH),
													-- continue IP flow
	dCCARetryAndTerminateOngoingSession		(19),	-- DCCA failure handling (CCFH),
													-- terminate IP flow after DCCA retry
	dCCATerminateOngoingSession 			(20),	-- DCCA failure handling,
													-- terminate IP flow
	cGI-SAIChange							(21),	-- bearer modification. "CGI-SAI Change"
	rAIChange								(22),	-- bearer modification. "RAI Change"
	dCCAServiceSpecificUnitExhausted		(23),	-- DCCA quota reauthorization
	recordClosure							(24),	-- PGW-CDR closure
	timeLimit								(25),	-- intermediate recording. From "Service Data
													--	Time Limit" Change-Condition AVP value
	volumeLimit								(26),	-- intermediate recording.From "Service Data
													--	Volume Limit" Change-Condition AVP value
	serviceSpecificUnitLimit				(27),	-- intermediate recording
	envelopeClosure 						(28),	
	eCGIChange								(29),	-- bearer modification. "ECGI Change"
	tAIChange								(30),	-- bearer modification. "TAI Change"
	userLocationChange						(31),	-- bearer modification. "User Location Change"
	userCSGInformationChange				(32),	-- bearer modification. "User CSG info Change"
	presenceInPRAChange						(33), 	-- bearer modification. "Change of UE Presence 
													-- in Presence Reporting Area"
	accessChangeOfSDF						(34),	-- "access change of service data flow"
	indirectServiceConditionChange			(35),	-- NBIFOM: "indirect service condition change"
	servingPLMNRateControlChange			(36), 	-- bearer modification. "Serving PLMNRate
												-- Control Change"
	aPNRateControlChange					(37)	-- bearer modification. "APN Rate ControlChange
}
--
-- Trigger and cause values for IP flow level recording are defined for support of independent
-- online and offline charging and also for tight interworking between online and offline charging.
-- Unused bits will always be zero.
-- Some of the values are non-exclusive (e.g. bearer modification reasons).
--

SCFAddress	::= AddressString
--
-- See TS 29.002 [214]
--

ServiceIdentifier	::= INTEGER (0..4294967295)
--
-- The service identifier is used to identify the service or the service component
-- the service data flow relates to. See Service-Identifier AVP as defined in TS 29.212 [220]
--

ServingNodeType	::= ENUMERATED
{
	sGSN		(0),
	pMIPSGW		(1),
	gTPSGW		(2),
	ePDG		(3),
	hSGW		(4),
	mME			(5),
	tWAN		(6)
}


ServingPLMNRateControl		::= SEQUENCE
--
-- See TS 29.128 [244] for more information
-- 
{
	sPLMNDLRateControlValue	[0] INTEGER,
	sPLMNULRateControlValue	[1] INTEGER 
}

SGiPtPTunnellingMethod		::= ENUMERATED
{
	uDPIPbased		(0),
	others			(1)
}


SGSNChange	::= BOOLEAN
--
-- present if first record after inter SGSN routing area update in new SGSN
--

SGWChange		::= BOOLEAN
--
-- present if first record after inter serving node change (SGW, ePDG, TWAG, HSGW)
--


TimeQuotaMechanism		::= SEQUENCE
{
	timeQuotaType					[1] TimeQuotaType,
	baseTimeInterval				[2] INTEGER
}

TimeQuotaType		::= ENUMERATED
{
	dISCRETETIMEPERIOD			(0),
	cONTINUOUSTIMEPERIOD		(1)
}

TrafficSteeringPolicyIDDownlink	::= OCTET STRING
--
-- see Traffic-Steering-Policy-Identifier-DL AVP as defined in TS 29.212[220]

TrafficSteeringPolicyIDUplink	::= OCTET STRING
--
-- see Traffic-Steering-Policy-Identifier-UL AVP as defined in TS 29.212[220]

TWANUserLocationInfo		::= SEQUENCE
{
	sSID					 [0] OCTET STRING,			-- see format in IEEE Std 802.11-2012 [408]
	bSSID					 [1] OCTET STRING OPTIONAL, 	-- see format in IEEE Std 802.11-2012 [408]
	civicAddressInformation	[2] CivicAddressInformation OPTIONAL,
	wLANOperatorId			[3] WLANOperatorId OPTIONAL,
	logicalAccessID			[4] OCTET STRING OPTIONAL
}

UNIPDUCPOnlyFlag	::= BOOLEAN


UserCSGInformation		::= SEQUENCE
{
	cSGId						[0] CSGId,
	cSGAccessMode				[1] CSGAccessMode,
	cSGMembershipIndication		[2] NULL OPTIONAL
}

UWANUserLocationInfo		::= SEQUENCE
{
	uELocalIPAddress		 [0] IPAddress,
	uDPSourcePort			 [1] OCTET STRING (SIZE(2)) OPTIONAL,
	sSID					 [2] OCTET STRING OPTIONAL,	-- see format in IEEE Std 802.11-2012 [408]
	bSSID					 [3] OCTET STRING OPTIONAL,	-- see format in IEEE Std 802.11-2012 [408]
	tCPSourcePort			[4] OCTET STRING (SIZE(2)) OPTIONAL,
	civicAddressInformation	[5] CivicAddressInformation OPTIONAL,
	wLANOperatorId			[6] WLANOperatorId OPTIONAL,
	logicalAccessID			[7] OCTET STRING OPTIONAL
}

VoLTEInformation ::= SEQUENCE
{
	callerInformation	[0] SEQUENCE OF InvolvedParty OPTIONAL,
	calleeInformation	[1] CalleePartyInformation OPTIONAL
}


WLANOperatorId ::= SEQUENCE 
{
	wLANOperatorName	[0] OCTET STRING,
	wLANPLMNId			[1] PLMN-Id
}


.#END

5.2.2.3	Void
5.2.2.4	CP data transfer domain CDRs
This subclause contains the abstract syntax definitions that are specific to the CP data transfer CDR types defined in TS 32.253 [13].
.$CPDTChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) cpdtChargingDataTypes (13) asn1Module (0) version2 (1)}
DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS

CallDuration, 
ChargingID,
DiameterIdentity,
Diagnostics, 
LocalSequenceNumber, 
ManagementExtensions,
MSISDN,
NodeID,
PLMN-Id,
RATType,
RecordType,
ServiceContextID,
SubscriptionID,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

IMEI,
IMSI
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0)gsm-Network (1) modules (3) map-CommonDataTypes (18) version18 (18)}
-- from TS 29.002 [214]

AccessPointNameNI,
APNRateControl,
ChargingCharacteristics,
ChChSelectionMode,
DataVolumeGPRS,
ServingPLMNRateControl
FROM GPRSChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) gprsChargingDataTypes (2) asn1Module (0) version2 (1)}

;


--
-- CP data transfer RECORDS
--


CPDTRecord		::= CHOICE 
--
-- Record values 105 to 106 are CP data transfer specific
-- 
{
	cPDTSCERecord			[105] 	CPDTSCERecord,
	cPDTSNNRecord			[106] 	CPDTSNNRecord
}



CPDTSCERecord 	::= SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	servedIMSI						[2] IMSI OPTIONAL,
	servedMSISDN					[3] MSISDN OPTIONAL,
	chargingID						[4] ChargingID,
	serviceContextID				[5] ServiceContextID OPTIONAL,
	nodeID							[6] NodeID OPTIONAL,
	recordOpeningTime				[7] TimeStamp,
	duration						[8] CallDuration,
	accessPointNameNI				[9] AccessPointNameNI OPTIONAL,
	sCEFID							[10] DiameterIdentity OPTIONAL,
	chargingCharacteristics			[11] ChargingCharacteristics,
	chChSelectionMode				[12] ChChSelectionMode OPTIONAL,
	servingNodeIdentity				[13] DiameterIdentity OPTIONAL,
	servingPLMNRateControl			[14] ServingPLMNRateControl OPTIONAL,
	listOfNIDDsubmission			[15] SEQUENCE OF NIDDsubmission OPTIONAL,
	causeForRecClosing				[16] CPCauseForRecClosing,
	diagnostics						[17] Diagnostics OPTIONAL,
	localSequenceNumber				[18] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber			[19] INTEGER OPTIONAL,
	recordExtensions				[20] ManagementExtensions OPTIONAL,
	externalIdentifier				[21] SubscriptionID OPTIONAL, 
	aPNRateControl					[22] APNRateControl OPTIONAL,
	rATType							[23] RATType OPTIONAL,
	servingNodePLMNIdentifier		[24] PLMN-Id OPTIONAL,
	servedIMEI						[25] IMEI OPTIONAL
}

CPDTSNNRecord 	::= SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	servedIMSI						[2] IMSI OPTIONAL,
	servedMSISDN					[3] MSISDN OPTIONAL,
	chargingID						[4] ChargingID,
	serviceContextID				[5] ServiceContextID OPTIONAL,
	nodeID							[6] NodeID OPTIONAL,
	recordOpeningTime				[7] TimeStamp,
	duration						[8] CallDuration,
	accessPointNameNI				[9] AccessPointNameNI OPTIONAL,
	sCEFID							[10] DiameterIdentity OPTIONAL,
	chargingCharacteristics			[11] ChargingCharacteristics,
	chChSelectionMode				[12] ChChSelectionMode OPTIONAL,
	servingNodeIdentity				[13] DiameterIdentity OPTIONAL,
	servingPLMNRateControl			[14] ServingPLMNRateControl OPTIONAL,
	listOfNIDDsubmission			[15] SEQUENCE OF NIDDsubmission OPTIONAL,
	causeForRecClosing				[16] CPCauseForRecClosing,
	diagnostics						[17] Diagnostics OPTIONAL,
	localSequenceNumber				[18] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber			[19] INTEGER OPTIONAL,
	recordExtensions				[20] ManagementExtensions OPTIONAL,
	externalIdentifier				[21] SubscriptionID OPTIONAL, 
	aPNRateControl					[22] APNRateControl OPTIONAL,
	rATType							[23] RATType OPTIONAL,
	servingNodePLMNIdentifier		[24] PLMN-Id OPTIONAL,
	servedIMEI						[25] IMEI OPTIONAL
}


--
-- CP data transfer DATA TYPES
--
-- 
-- C
-- 


CPCauseForRecClosing	::= INTEGER
{
	normalRelease					(0),
	abnormalRelease					(1),
	volumeLimit						(2),
	timeLimit						(3),
	maxNIDDsubmissions				(4),
	servingNodeChange				(5),
	pLMNChange						(6),
	servingPLMNRateControlChange	(7),
	aPNRateControlChange			(8),
	rATTypeChange					(9),
	managementIntervention			(10)
}

-- 
-- N
-- 

NIDDsubmission			::= SEQUENCE
{
	submissionTimestamp			[0] TimeStamp OPTIONAL,
	eventTimestamp				[1] TimeStamp OPTIONAL,
	dataVolumeGPRSUplink		[2] DataVolumeGPRS OPTIONAL,
	dataVolumeGPRSDownlink		[3] DataVolumeGPRS OPTIONAL,
	submissionResultCode		[4] SubmissionResultCode OPTIONAL,
	serviceChangeCondition		[5] ServiceChangeCondition OPTIONAL
}

-- 
-- S
-- 

ServiceChangeCondition	::= BIT STRING
{
	nIDDsubmissionResponseReceipt		(0),
	nIDDsubmissionResponseSending	(1),
	nIDDdeliveryToUE				(2),
	nIDDdeliveryFromUEerror			(3),
	nIDDsubmissionTimeout			(4)
}

SubmissionResultCode		::= INTEGER
-- 
-- Result-Code AVP and Experimental-Result AVP Values as specified in TS 29.128 [244] 
-- for MO/MT data transfer
--

.#END


5.2.2.5	Exposure Function API CDRs
This subclause contains the abstract syntax definitions that are specific to the Exposure Function API CDR types defined in TS 32.254 [14].
.$ExposureFunctionAPIChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) exposureFunctionAPIChargingDataTypes (14) asn1Module (0) version2 (1)}
DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS

DiameterIdentity,
IPAddress,
LocalSequenceNumber,
ManagementExtensions,
MSTimeZone,
NodeID,
RecordType,
SCSASAddress,
ServiceContextID,
SubscriptionID,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

;

--
-- ExposureFunctionAPI RECORDS
--

ExposureFunctionAPIRecordType		::= CHOICE 
--
-- Record values 120 are ExposureFunctionAPI specific
-- 
{
	eASCERecord			[120] EASCERecord	
}

EASCERecord 	::= SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	serviceContextID				[2] ServiceContextID OPTIONAL,
	nodeId 							[3] NodeID OPTIONAL, 
	sCEFID							[4] DiameterIdentity OPTIONAL,
	sCEFAddress						[5] IPAddress OPTIONAL,
	aPIIdentifier					[6] OCTET STRING OPTIONAL,
	tLTRI							[7] INTEGER OPTIONAL,
	sCSASAddress					[9] SCSASAddress OPTIONAL,
	eventTimestamp					[10] TimeStamp OPTIONAL,
	aPIInvocationTimestamp 			[11] TimeStamp OPTIONAL,
	aPIDirection					[12] APIDirection OPTIONAL,
	aPINetworkServiceNode		[13] APINetworkServiceNode OPTIONAL,
	aPIContent						[14] UTF8String OPTIONAL,
	aPISize							[15] INTEGER OPTIONAL,
	aPIresultCode					[16] INTEGER OPTIONAL,
	externalIdentifier				[17] SubscriptionID OPTIONAL,
	localRecordSequenceNumber		[18] LocalSequenceNumber OPTIONAL, 
	recordExtensions				[19] ManagementExtensions OPTIONAL,
	startTime						[20] TimeStamp OPTIONAL,
	stopTime						[21] TimeStamp OPTIONAL

}

--
-- ExposureFunctionAPI DATA TYPES
--
-- 
-- A
-- 

APIDirection			::= ENUMERATED
--
-- Used for distinguish the API invocation or API notification
--
{
	invocation				(0),
	notification			(1)
}

APINetworkServiceNode			::= ENUMERATED
{
	mME				(0),
	sGSN			(1),
	hSS				(2),
	pCRF			(3),
	pFDF			(4),
	bMSC			(5),
	cCSCF			(6),
	rCAF			(7)
}



.#END


5.2.3	Subsystem level CDR definitions
5.2.3.0	Introduction
This subclause contains the syntax definitions of the CDRs on the subsystem level. At present, only the IM subsystem is defined in 3GPP, thus this subclause comprises the CDR types specified for the IMS in TS 32.260 [20].
5.2.3.1	IMS CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.260 [20].
.$IMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) imsChargingDataTypes (4) asn1Module (0) version2 (1)}
DEFINITIONS IMPLICIT TAGS ::=

BEGIN

-- EXPORTS everything

IMPORTS

InvolvedParty,
IPAddress,
LocalSequenceNumber,
ManagementExtensions,
NodeAddress,
MSCAddress,
MSTimeZone,
RecordType,
ServiceContextID,
ServiceSpecificInfo, 
Session-Id,
SubscriberEquipmentNumber,
SubscriptionID, 
ThreeGPPPSDataOffStatus,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)} 



;

--
-- IMS RECORDS
--

IMSRecord ::= CHOICE
--
-- Record values 63-69, 82, 89, ,90, 91 are IMS specific
--
{
	sCSCFRecord			[63] SCSCFRecord,
	pCSCFRecord			[64] PCSCFRecord,
	iCSCFRecord			[65] ICSCFRecord,
	mRFCRecord			[66] MRFCRecord,
	mGCFRecord			[67] MGCFRecord,
	bGCFRecord			[68] BGCFRecord,
	aSRecord				[69] ASRecord,
	eCSCFRecord			[70] ECSCFRecord,
	iBCFRecord			[82] IBCFRecord,
	tRFRecord			[89] TRFRecord,
	tFRecord				[90] TFRecord,
	aTCFRecord			[91] ATCFRecord
}

SCSCFRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL,
	privateUserID						[8] GraphicString OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifierList OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress							[22] NodeAddress OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies				[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	list-Of-Associated-URI				[27] ListOfInvolvedParties OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID				[31] SEQUENCE OF SubscriptionID OPTIONAL,
	list-Of-Early-SDP-Media-Components	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier	[33] IMSCommunicationServiceIdentifier OPTIONAL,
	numberPortabilityRouting				[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting					[35] CarrierSelectRouting OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	applicationServersInformation			[40] SEQUENCE OF ApplicationServersInformation OPTIONAL,
	requested-Party-Address					[41] InvolvedParty OPTIONAL,
	list-Of-Called-Asserted-Identity 		[42] ListOfInvolvedParties OPTIONAL,
	online-charging-flag						[43] NULL OPTIONAL,
	realTimeTariffInformation				[44] SEQUENCE OF RealTimeTariffInformation OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone 								[48] MSTimeZone OPTIONAL,
	nNI-Information     						[46] NNI-Information OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	iMSEmergencyIndicator					[52] NULL OPTIONAL,
	transit-IOI-Lists						[53] TransitIOILists OPTIONAL,
	iMSVisitedNetworkIdentifier				[54] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL, 
	instanceId								[57] OCTET STRING OPTIONAL, 
	subscriberEquipmentNumber				[58] SubscriberEquipmentNumber OPTIONAL,
	routeHeaderReceived						[59] OCTET STRING OPTIONAL,
	routeHeaderTransmitted					[60] OCTET STRING OPTIONAL,
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	listOfCalledIdentityChanges				[63] SEQUENCE OF CalledIdentityChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	fEIdentifierList                        [65] FEIdentifierList OPTIONAL

}

PCSCFRecord		::= SET
--
-- This record is also applicable for P-CSCF with collocated ATCF
-- ATCF-specific fields which are not applicable to P-CSCF are indicated.
--
{
	recordType								[0] RecordType,
	retransmission							[1] NULL OPTIONAL,
	sIP-Method								[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress								[4] NodeAddress OPTIONAL,
	session-Id								[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address			[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL, 
	privateUserID							[8] GraphicString OPTIONAL,
	serviceRequestTimeStamp					[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp			[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp				[11] TimeStamp OPTIONAL,
	recordOpeningTime						[12] TimeStamp OPTIONAL,
	recordClosureTime						[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber				[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing					[17] CauseForRecordClosing OPTIONAL, 
	incomplete-CDR-Indication				[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier					[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress								[22] NodeAddress OPTIONAL,
	serviceReasonReturnCode					[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies					[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation						[26] INTEGER OPTIONAL,
	list-Of-Associated-URI					[27] ListOfInvolvedParties OPTIONAL,
	event									[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID					[31] SEQUENCE OF SubscriptionID OPTIONAL,
	list-Of-Early-SDP-Media-Components 		[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier		[33] IMSCommunicationServiceIdentifier OPTIONAL,
	sessionPriority							[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction			[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL, 
	list-of-Requested-Party-Address			[41] ListOfInvolvedParties OPTIONAL, -- ATCF only
	list-Of-Called-Asserted-Identity 		[42] ListOfInvolvedParties OPTIONAL,
	nNI-Information							[46] NNI-Information OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone 								[48] MSTimeZone OPTIONAL,
	servedPartyIPAddress					[50] ServedPartyIPAddress OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	iMSEmergencyIndicator					[52] NULL OPTIONAL,
	transit-IOI-Lists						[53] TransitIOILists OPTIONAL,
	iMSVisitedNetworkIdentifier				[54] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	instanceId								[57] OCTET STRING OPTIONAL, 
	subscriberEquipmentNumber				[58] SubscriberEquipmentNumber OPTIONAL,
	routeHeaderReceived						[59] OCTET STRING OPTIONAL,
	routeHeaderTransmitted					[60] OCTET STRING OPTIONAL,
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	listOfCalledIdentityChanges				[63] SEQUENCE OF CalledIdentityChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	initialIMS-Charging-Identifier			[105] IMS-Charging-Identifier OPTIONAL, -- ATCF only
	list-Of-AccessTransferInformation		[106] SEQUENCE OF AccessTransferInformation OPTIONAL, 
												 -- ATCF only
	relatedICID								[107] IMS-Charging-Identifier OPTIONAL,
	relatedICIDGenerationNode				[108] NodeAddress OPTIONAL,
	fEIdentifierList                        [109] FEIdentifierList OPTIONAL

}
	
ICSCFRecord		::= SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	sIP-Method						[2] SIP-Method OPTIONAL,
	role-of-Node						[3] Role-of-Node OPTIONAL,
	nodeAddress						[4] NodeAddress OPTIONAL,
	session-Id						[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address	[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address				[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp			[9] TimeStamp OPTIONAL,
	interOperatorIdentifiers			[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber		[15] LocalSequenceNumber OPTIONAL,
	causeForRecordClosing			[17] CauseForRecordClosing OPTIONAL, 
	incomplete-CDR-Indication		[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier			[19] IMS-Charging-Identifier OPTIONAL,
	serviceReasonReturnCode			[23] UTF8String OPTIONAL,
	recordExtensions					[25] ManagementExtensions OPTIONAL,
	expiresInformation				[26] INTEGER OPTIONAL,
	list-Of-Associated-URI			[27] ListOfInvolvedParties OPTIONAL,
	event							[28] UTF8String OPTIONAL,
	accessNetworkInformation			[29] OCTET STRING OPTIONAL,
	serviceContextID					[30] ServiceContextID OPTIONAL,
	numberPortabilityRouting			[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting				[35] CarrierSelectRouting OPTIONAL,
	sessionPriority					[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction	[37] Milliseconds OPTIONAL,
	transit-IOI-List					[45] GraphicString OPTIONAL,
	userLocationInformation			[47] OCTET STRING OPTIONAL,
	mSTimeZone 						[48] MSTimeZone OPTIONAL,
	fromAddress						[51] OCTET STRING OPTIONAL,
	iMSEmergencyIndicator			[52] NULL OPTIONAL, 
	listOfReasonHeader				[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation	[56] OCTET STRING OPTIONAL,
	routeHeaderTransmitted				[60] OCTET STRING OPTIONAL,
	s-CSCF-Information					[61] S-CSCF-Information OPTIONAL,
	cellularNetworkInformation			[64] OCTET STRING OPTIONAL,
	fEIdentifierList                    [65] FEIdentifierList OPTIONAL

}

MRFCRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress							[22] NodeAddress OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL, 
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID				[31] SEQUENCE OF SubscriptionID OPTIONAL,
	list-Of-Early-SDP-Media-Components	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	applicationServersInformation			[40] SEQUENCE OF ApplicationServersInformation OPTIONAL,
	online-charging-flag						[43] NULL OPTIONAL,
	transit-IOI-List							[45] GraphicString OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone 								[48] MSTimeZone OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL, 
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	service-Id								[70] Service-Id OPTIONAL,
	requested-Party-Address					[71] InvolvedParty OPTIONAL,
	list-Of-Called-Asserted-Identity		[72] ListOfInvolvedParties OPTIONAL,
	fEIdentifierList                        [73] FEIdentifierList OPTIONAL

}

MGCFRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL, 
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-Of-Early-SDP-Media-Components	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	numberPortabilityRouting				[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting					[35] CarrierSelectRouting OPTIONAL, 
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	realTimeTariffInformation				[44] SEQUENCE OF RealTimeTariffInformation OPTIONAL,
	transit-IOI-List							[45] GraphicString OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL, 
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	trunkGroupID								[80] TrunkGroupID OPTIONAL,
	bearerService							[81] TransmissionMedium OPTIONAL,
	iSUPCause								[82] ISUPCause OPTIONAL,
	fEIdentifierList                        [83] FEIdentifierList OPTIONAL

}

BGCFRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	interOperatorIdentifiers			[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	recordExtensions					[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	numberPortabilityRouting				[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting					[35] CarrierSelectRouting OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	transit-IOI-List							[45] GraphicString OPTIONAL,
	nNI-Information     						[46] NNI-Information OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	fEIdentifierList                        [65] FEIdentifierList OPTIONAL

}

ASRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL, 
	privateUserID						[8] GraphicString OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL, 
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress							[22] NodeAddress OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies				[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID				[31] SEQUENCE OF SubscriptionID OPTIONAL,
	list-Of-Early-SDP-Media-Components 	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier	[33] IMSCommunicationServiceIdentifier OPTIONAL,
	numberPortabilityRouting				[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting						[35] CarrierSelectRouting OPTIONAL,
	sessionPriority							[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction			[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	list-of-Requested-Party-Address			[41] ListOfInvolvedParties OPTIONAL,
	online-charging-flag						[43] NULL OPTIONAL,
	realTimeTariffInformation				[44] SEQUENCE OF RealTimeTariffInformation OPTIONAL,
	nNI-Information							[46] NNI-Information OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone 								[48] MSTimeZone OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	transit-IOI-Lists						[53] TransitIOILists OPTIONAL,
	iMSVisitedNetworkIdentifier				[54] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	instanceId								[57] OCTET STRING OPTIONAL,
	subscriberEquipmentNumber				[58] SubscriberEquipmentNumber OPTIONAL, 
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	listOfCalledIdentityChanges				[63] SEQUENCE OF CalledIdentityChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	serviceSpecificInfo						[100] SEQUENCE OF ServiceSpecificInfo OPTIONAL,
	requested-Party-Address					[101] InvolvedParty OPTIONAL,
	list-Of-Called-Asserted-Identity			[102] ListOfInvolvedParties OPTIONAL,
	alternateChargedPartyAddress				[103] UTF8String OPTIONAL,
	outgoingSessionId						[104] Session-Id OPTIONAL,
	initialIMS-Charging-Identifier			[105] IMS-Charging-Identifier OPTIONAL,
	list-Of-AccessTransferInformation		[106] SEQUENCE OF AccessTransferInformation OPTIONAL,
	tADS-Identifier							[109] TADIdentifier OPTIONAL,
	vlr-Number								[110] MSCAddress OPTIONAL,
	msc-Address								[111] MSCAddress OPTIONAL,
	threeGPPPSDataOffStatus					[112] ThreeGPPPSDataOffStatus OPTIONAL,
	fEIdentifierList                        [113] FEIdentifierList OPTIONAL
}

ECSCFRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifierList OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress							[22] NodeAddress OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies				[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID				[31] SEQUENCE OF SubscriptionID OPTIONAL,
	list-Of-Early-SDP-Media-Components	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier	[33] IMSCommunicationServiceIdentifier OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	applicationServersInformation			[40] SEQUENCE OF ApplicationServersInformation OPTIONAL,
	requested-Party-Address					[41] InvolvedParty OPTIONAL,
	list-Of-Called-Asserted-Identity			[42] ListOfInvolvedParties OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone 								[48] MSTimeZone OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	transit-IOI-Lists						[53] TransitIOILists OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	listOfCalledIdentityChanges				[63] SEQUENCE OF CalledIdentityChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	fEIdentifierList                        [65] FEIdentifierList OPTIONAL

}

IBCFRecord		::= SET
--
-- This record is also applicable for IBCF with collocated ATCF
-- ATCF-specific fields which are not applicable to IBCF are indicated.
--
{
	recordType								[0] RecordType,
	retransmission							[1] NULL OPTIONAL,
	sIP-Method								[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress								[4] NodeAddress OPTIONAL,
	session-Id								[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address			[6] ListOfInvolvedParties OPTIONAL,	
	called-Party-Address					[7] InvolvedParty OPTIONAL, 
	privateUserID							[8] GraphicString OPTIONAL, -- ATCF only
	serviceRequestTimeStamp					[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp			[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp				[11] TimeStamp OPTIONAL,
	recordOpeningTime						[12] TimeStamp OPTIONAL,
	recordClosureTime						[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers					[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber			[	15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber						[16] INTEGER OPTIONAL,
	causeForRecordClosing					[17] CauseForRecordClosing OPTIONAL, 
	incomplete-CDR-Indication				[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier					[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL, 
	gGSNaddress								[22] NodeAddress OPTIONAL, -- ATCF only
	serviceReasonReturnCode					[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies					[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation						[26] INTEGER OPTIONAL,
	event									[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID					[31] SEQUENCE OF SubscriptionID OPTIONAL, -- ATCF only
	list-Of-Early-SDP-Media-Components 		[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier		[33] IMSCommunicationServiceIdentifier OPTIONAL,
	sessionPriority							[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction			[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	list-of-Requested-Party-Address			[41] ListOfInvolvedParties OPTIONAL, -- ATCF only
	list-Of-Called-Asserted-Identity		[42] ListOfInvolvedParties OPTIONAL, -- ATCF only	realTimeTariffInformation				[44] SEQUENCE OF RealTimeTariffInformation OPTIONAL,
	transit-IOI-List						[45] GraphicString OPTIONAL,
	nNI-Information							[46] SEQUENCE OF NNI-Information OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone								[48] MSTimeZone OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	routeHeaderReceived						[59] OCTET STRING OPTIONAL, 
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	initialIMS-Charging-Identifier			[105] IMS-Charging-Identifier OPTIONAL, -- ATCF only
	list-Of-AccessTransferInformation		[106] SEQUENCE OF AccessTransferInformation OPTIONAL,
												-- ATCF only
	fEIdentifierList                        [107] FEIdentifierList OPTIONAL

}

TRFRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifierList OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies				[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID				[31] SEQUENCE OF SubscriptionID OPTIONAL, 
	list-Of-Early-SDP-Media-Components 	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier	[33] IMSCommunicationServiceIdentifier OPTIONAL,
	numberPortabilityRouting				[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting					[35] CarrierSelectRouting OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction			[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	applicationServersInformation			[40] SEQUENCE OF ApplicationServersInformation OPTIONAL,
	requested-Party-Address					[41] InvolvedParty OPTIONAL,
	list-Of-Called-Asserted-Identity			[42] ListOfInvolvedParties OPTIONAL,
	nNI-Information							[46] SEQUENCE OF NNI-Information OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone 								[48] MSTimeZone OPTIONAL,
	transit-IOI-Lists						[53] TransitIOILists OPTIONAL, 
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	routeHeaderReceived						[59] OCTET STRING OPTIONAL,
	listOfCalledIdentityChanges				[63] SEQUENCE OF CalledIdentityChange OPTIONAL,
	fEIdentifierList                        [64] FEIdentifierList OPTIONAL

}

ATCFRecord 	::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL, 
	privateUserID						[8] GraphicString OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL, 
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress							[22] NodeAddress OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies				[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation				[29] OCTET STRING OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID				[31] SEQUENCE OF SubscriptionID OPTIONAL,
	list-Of-Early-SDP-Media-Components	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier	[33] IMSCommunicationServiceIdentifier OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	list-of-Requested-Party-Address			[41] ListOfInvolvedParties OPTIONAL,
	list-Of-Called-Asserted-Identity			[42] ListOfInvolvedParties OPTIONAL,
	nNI-Information							[46] NNI-Information OPTIONAL,
	userLocationInformation					[47] OCTET STRING OPTIONAL,
	mSTimeZone								[48] MSTimeZone OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	routeHeaderReceived						[59] OCTET STRING OPTIONAL,
	routeHeaderTransmitted					[60] OCTET STRING OPTIONAL, 
	list-Of-AccessNetworkInfoChange			[62] SEQUENCE OF AccessNetworkInfoChange OPTIONAL,
	listOfCalledIdentityChanges				[63] SEQUENCE OF CalledIdentityChange OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	initialIMS-Charging-Identifier			[105] IMS-Charging-Identifier OPTIONAL,
	list-Of-AccessTransferInformation		[106] SEQUENCE OF AccessTransferInformation OPTIONAL,
	fEIdentifierList                        [107] FEIdentifierList OPTIONAL

}

TFRecord		::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node							[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,
	called-Party-Address					[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers				[14] InterOperatorIdentifierList OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber					[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components			[21] SEQUENCE OF Media-Components-List OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies				[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions						[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	serviceContextID						[30] ServiceContextID OPTIONAL,
	list-Of-Early-SDP-Media-Components	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier	[33] IMSCommunicationServiceIdentifier OPTIONAL,
	numberPortabilityRouting				[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting					[35] CarrierSelectRouting OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	applicationServersInformation			[40] SEQUENCE OF ApplicationServersInformation OPTIONAL,
	requested-Party-Address					[41] InvolvedParty OPTIONAL,
	list-Of-Called-Asserted-Identity 		[42] ListOfInvolvedParties OPTIONAL,
	nNI-Information							[46] NNI-Information OPTIONAL,
	fromAddress								[51] OCTET STRING OPTIONAL,
	transit-IOI-Lists						[53] TransitIOILists OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	routeHeaderReceived						[59] OCTET STRING OPTIONAL,
	routeHeaderTransmitted					[60] OCTET STRING OPTIONAL,
	listOfCalledIdentityChanges				[63] SEQUENCE OF CalledIdentityChange OPTIONAL,
	fEIdentifierList                        [64] FEIdentifierList OPTIONAL

}

--
-- IMS DATA TYPES
--
-- 
-- A
-- 

AccessCorrelationID		::= CHOICE
--
-- gPRS-Charging-Id is used for GPRS, EPS and 5GS  
--

{
	gPRS-Charging-Id					[2] INTEGER (0..4294967295),
	accessNetworkChargingIdentifier	[4] GraphicString
}

AccessNetworkInfoChange		::= SEQUENCE
{
	accessNetworkInformation 			 [0] OCTET STRING OPTIONAL,
	additionalAccessNetworkInformation	 [1] OCTET STRING OPTIONAL,
	accessChangeTime					 [2] TimeStamp OPTIONAL,
	cellularNetworkInformation			 [3] OCTET STRING OPTIONAL
}

AccessTransferType	::= ENUMERATED
{
	pSToCS (0),
	cSToPS (1) ,
	pSToPS (2),
	cSToCS (3)
}


AccessTransferInformation		::= SEQUENCE
{
	accessTransferType 		 			 [0] AccessTransferType OPTIONAL,
	accessNetworkInformation 			 [1] OCTET STRING OPTIONAL,
	additionalAccessNetworkInformation	 [2] OCTET STRING OPTIONAL,
	inter-UE-Transfer					 [3] NULL OPTIONAL,
	relatedICID							 [4] IMS-Charging-Identifier OPTIONAL,
	relatedICIDGenerationNode			 [5] NodeAddress OPTIONAL,
	accessTransferTime                 	 [6] TimeStamp OPTIONAL,
	subscriberEquipmentNumber			 [7] SubscriberEquipmentNumber OPTIONAL,
	instanceId							 [8] OCTET STRING OPTIONAL,
	cellularNetworkInformation			 [9] OCTET STRING OPTIONAL
}

ACRInterimLost		::= ENUMERATED
{
	no		(0),
	yes		(1),
	unknown	(2)
}

AoCCostInformation		::= SEQUENCE
{
	accumulatedCost		[0] REAL,
	incrementalCost		[1] REAL,
	currencyCode			[2] INTEGER
}

AoCInformation ::= SET
{
	tariffInformation		[0] TariffInformation OPTIONAL,
	aoCCostInformation		[1] AoCCostInformation OPTIONAL
}

ApplicationServersInformation	::= SEQUENCE
{
	applicationServersInvolved 			[0] NodeAddress OPTIONAL,
	applicationProvidedCalledParties		[1] SEQUENCE OF InvolvedParty OPTIONAL,
	sTatus								[2] Status OPTIONAL
}

-- 
-- C
-- 

CalledIdentityChange	::= SEQUENCE
{
calledIdentity	[0]	InvolvedParty OPTIONAL,
changeTime		[1] TimeStamp OPTIONAL
}

CarrierSelectRouting	::= GraphicString

CauseForRecordClosing	::= ENUMERATED
{
	serviceDeliveryEndSuccessfully	(0),
	unSuccessfulServiceDelivery		(1),
	timeLimit						(3),
	serviceChange					(4), -- e.g. change in media due to Re-Invite, 
										 -- Access Transfer
	managementIntervention			(5)  -- partial record generation reasons to be added
										 --  Additional codes are for further study
}

-- 
-- E
-- 

Early-Media-Components-List	::= SEQUENCE
{
	sDP-Offer-Timestamp 		[0] TimeStamp OPTIONAL,
	sDP-Answer-Timestamp		[1] TimeStamp OPTIONAL,
	sDP-Media-Components		[2] SEQUENCE OF SDP-Media-Component OPTIONAL,
	mediaInitiatorFlag		[3] NULL OPTIONAL,
	sDP-Session-Description	[4] SEQUENCE OF GraphicString OPTIONAL,
	sDP-Type					[5] SDP-Type OPTIONAL
}

-- 
-- F
-- 

FEIdentifierList ::= SEQUENCE OF GraphicString

-- 
-- I
-- 

IMS-Charging-Identifier	::= OCTET STRING

IMSCommunicationServiceIdentifier	::= OCTET STRING

Incomplete-CDR-Indication	::= SET 
{
	aCRStartLost	[0] BOOLEAN,		-- TRUE if ACR[Start] was lost, FALSE otherwise
	aCRInterimLost	[1] ACRInterimLost,
	aCRStopLost		[2] BOOLEAN			-- TRUE if ACR[Stop] was lost, FALSE otherwise
}

InterOperatorIdentifierList ::= SEQUENCE OF InterOperatorIdentifiers

InterOperatorIdentifiers ::= SEQUENCE
{
	originatingIOI	[0] GraphicString OPTIONAL,
	terminatingIOI	[1] GraphicString OPTIONAL
}


ISUPCause	::= SEQUENCE
{
	iSUPCauseLocation 		[0] INTEGER OPTIONAL,
	iSUPCauseValue			[1] INTEGER OPTIONAL,
	iSUPCauseDiagnostics		[2] OCTET STRING OPTIONAL
}

-- 
-- L
-- 

ListOfInvolvedParties	::= SEQUENCE OF InvolvedParty

ListOfReasonHeader	::= SEQUENCE OF ReasonHeaderInformation

-- 
-- M
-- 

Media-Components-List	::= SEQUENCE 
--
--	MediaInitiatorParty is used to identify the initiator of the media 
--	multi-participants session e.g. in AS PoC Server
--
{
	sIP-Request-Timestamp 			[0] TimeStamp OPTIONAL,
	sIP-Response-Timestamp			[1] TimeStamp OPTIONAL,
	sDP-Media-Components			[2] SEQUENCE OF SDP-Media-Component OPTIONAL,
	mediaInitiatorFlag				[3] NULL OPTIONAL,
	sDP-Session-Description			[4] SEQUENCE OF GraphicString OPTIONAL,
	mediaInitiatorParty				[5] InvolvedParty OPTIONAL,
	sIP-Request-Timestamp-Fraction	[6] Milliseconds OPTIONAL,
	sIP-Response-Timestamp-Fraction	[7] Milliseconds OPTIONAL,
	sDP-Type						[8] SDP-Type OPTIONAL
}

MessageBody	::= SEQUENCE 
{
	content-Type				[0] GraphicString,
	content-Disposition		[1] GraphicString OPTIONAL,
	content-Length			[2] INTEGER,
	originator				[3] InvolvedParty OPTIONAL
}

Milliseconds	::= INTEGER (0..999)

-- 
-- N
-- 

NNI-Information		::= SEQUENCE
{
	sessionDirection		[0] SessionDirection OPTIONAL,
	nNIType				[1] NNIType OPTIONAL,
	relationshipMode		[2] RelationshipMode OPTIONAL,
	neighbourNodeAddress	[3] IPAddress OPTIONAL
}

NNIType		::= ENUMERATED
{
	non-roaming					(0),
	roaming-without-loopback		(1),
	roaming-with-loopback		(2)
}

NumberPortabilityRouting		::= GraphicString

-- 
-- R
-- 

RateElement		::= SEQUENCE
{
	unitType				[0] INTEGER,
	unitValue			[1] REAL,
	unitCost				[2] REAL,
	unitQuotaThreshold	[3] REAL
}

RealTimeTariffInformation ::= CHOICE
{
	tariffInformation		[0] TariffInformation,
	tariffXml				[1] UTF8String 
}

ReasonHeaderInformation ::= GraphicString

RelationshipMode ::= ENUMERATED
{
	trusted		(0),
	non-trusted	(1)
}

Role-of-Node	::= ENUMERATED
{
	originating	(0),
	terminating	(1)
}

-- 
-- S
-- 

S-CSCF-Information	::= SEQUENCE
{
	mandatoryCapabilities 	[0] SEQUENCE OF GraphicString OPTIONAL,
	optionalCapabilities	[1] SEQUENCE OF GraphicString OPTIONAL,
	serverName 				[2] GraphicString OPTIONAL
}

SDP-Media-Component ::=  SEQUENCE
{
	sDP-Media-Name        			[0] GraphicString OPTIONAL,
	sDP-Media-Descriptions			[1] SDP-Media-Description OPTIONAL,
	accessCorrelationID					AccessCorrelationID OPTIONAL,	-- not used in MGCF
									-- [2] is used by gPRS-Charging-Id
									-- [4] is used by accessNetworkChargingIdentifier
	localGWInsertedIndication		[5] BOOLEAN OPTIONAL,
	iPRealmDefaultIndication		[6] BOOLEAN OPTIONAL,
	transcoderInsertedIndication	[7] BOOLEAN OPTIONAL
}

SDP-Media-Description	::= SEQUENCE OF GraphicString

ServedPartyIPAddress	::=  IPAddress 

Service-Id	::= GraphicString


SessionDirection	::= ENUMERATED
{
	inbound		(0),
	outbound		(1)
}

SessionPriority	::= ENUMERATED
--
-- PRIORITY-0 is the highest priority and Priority-4 is the lowest priority. See TS 29.229[232]
--
{
	pRIORITY-0 (0),
	pRIORITY-1 (1),
	pRIORITY-2 (2),
	pRIORITY-3 (3),
	pRIORITY-4 (4)
}

SIP-Method	::= GraphicString

SDP-Type	::= ENUMERATED
{
	sDP-offer	(0),
	sDP-answer	(1)
}

Status		::= ENUMERATED 
{
	fourxx			(0),
	fivexx			(1),
	time-out			(2)
}

-- 
-- T
-- 

TADIdentifier		::= ENUMERATED
{
	cS		(0),
	pS		(1)
}

TariffInformation ::= SEQUENCE
{
	currencyCode			[0] INTEGER,
	scaleFactor			[1] REAL,
	rateElements			[2] SEQUENCE OF RateElement OPTIONAL
}

TransitIOILists ::= SEQUENCE OF GraphicString

TransmissionMedium ::= SEQUENCE
{
	tMR	[0] OCTET STRING (SIZE (1)) OPTIONAL, -- required TM, refer to Q.763
	tMU	[1] OCTET STRING (SIZE (1)) OPTIONAL  -- used TM, refer to Q.763
}

TrunkGroupID ::= CHOICE
{
	incoming	[0] GraphicString,
	outgoing	[1] GraphicString
}

.#END
5.2.4	Service level CDR definitions
5.2.4.0	General
This subclause contains the syntax definitions of the CDRs on the service level. This comprises the CDR types from the MMS (TS 32.270 [30]), the LCS (TS 32.271 [31]), PoC (TS 32.272 [32]), MBMS (TS 32.273 [33]), and MMTel (TS 32.275 [35]) services.
5.2.4.1	MMS CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.270 [30].
.$MMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5)  mmsChargingDataTypes (5) asn1Module (0) version2 (1)}

DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything

IMPORTS	


ChargingID,
GSNAddress,
IPAddress,
LocalSequenceNumber,
ManagementExtensions,
MessageClass,
MscNo,
MSISDN, 
MSTimeZone,
PLMN-Id,
PriorityType,
RATType,
RecordType,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

CallReferenceNumber
FROM MAP-CH-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0)
gsm-Network (1) modules (3) map-CH-DataTypes (13)  version18 (18)}
-- from TS 29.002 [214]

;

--
--  MMS RECORDS
--

MMSRecordType	::= CHOICE
--
-- Record values 30..62 are MMS specific
--
{
	mMO1SRecord				[30] MMO1SRecord,
	mMO4FRqRecord			[31] MMO4FRqRecord,
	mMO4FRsRecord			[32] MMO4FRsRecord,
	mMO4DRecord				[33] MMO4DRecord,
	mMO1DRecord				[34] MMO1DRecord,
	mMO4RRecord				[35] MMO4RRecord,
	mMO1RRecord				[36] MMO1RRecord,
	mMOMDRecord				[37] MMOMDRecord,
	mMR4FRecord				[38] MMR4FRecord,
	mMR1NRqRecord			[39] MMR1NRqRecord,
	mMR1NRsRecord			[40] MMR1NRsRecord,
	mMR1RtRqRecord			[41] MMR1RtRecord,
	mMR1ARecord				[42] MMR1ARecord,
	mMR4DRqRecord			[43] MMR4DRqRecord,
	mMR4DRsRecord			[44] MMR4DRsRecord,
	mMR1RRRecord			[45] MMR1RRRecord,
	mMR4RRqRecord			[46] MMR4RRqRecord,
	mMR4RRsRecord			[47] MMR4RRsRecord,
	mMRMDRecord				[48] MMRMDRecord,
	mMFRecord				[49] MMFRecord,
	mMBx1SRecord			[50] MMBx1SRecord,
	mMBx1VRecord			[51] MMBx1VRecord,
	mMBx1URecord			[52] MMBx1URecord,
	mMBx1DRecord			[53] MMBx1DRecord,
	mM7SRecord				[54] MM7SRecord,
	mM7DRqRecord			[55] MM7DRqRecord,
	mM7DRsRecord			[56] MM7DRsRecord,
	mM7CRecord				[57] MM7CRecord,
	mM7RRecord				[58] MM7RRecord,
	mM7DRRqRecord			[59] MM7DRRqRecord,
	mM7DRRsRecord			[60] MM7DRRsRecord,
	mM7RRqRecord			[61] MM7RRqRecord,
	mM7RRsRecord			[62] MM7RRsRecord
}

MMO1SRecord	::= SET
{
	recordType					[0] RecordType,
	originatorMmsRSAddress		[1] MMSRSAddress,
	messageID					[2] OCTET STRING,
	replyChargingID				[3] OCTET STRING OPTIONAL,
	originatorAddress			[4] MMSAgentAddress,
	recipientAddresses			[5] MMSAgentAddresses,
	accessCorrelation			[6] AccessCorrelation OPTIONAL,
	contentType					[7] ContentType,
	mmComponentType				[8] MMComponentType OPTIONAL,
	messageSize					[9] DataVolume,
	messageClass				[10] MessageClass OPTIONAL,
	chargeInformation			[11] ChargeInformation OPTIONAL,
	submissionTime				[12] TimeStamp OPTIONAL, 
	timeOfExpiry				[13] WaitTime OPTIONAL,
	earliestTimeOfDelivery		[14] WaitTime OPTIONAL, 
	durationOfTransmission		[15] INTEGER OPTIONAL,
	requestStatusCode			[16] RequestStatusCodeType OPTIONAL,
	deliveryReportRequested		[17] BOOLEAN OPTIONAL,
	replyCharging				[18] BOOLEAN OPTIONAL,
	replyDeadline				[19] WaitTime OPTIONAL,
	replyChargingSize			[20] DataVolume OPTIONAL,
	priority					[21] PriorityType OPTIONAL,
	senderVisibility			[22] BOOLEAN OPTIONAL,
	readReplyRequested			[23] BOOLEAN OPTIONAL,
	statusText					[24] StatusTextType,
	recordTimeStamp				[25] TimeStamp,
	localSequenceNumber			[26] LocalSequenceNumber OPTIONAL,
	recordExtensions			[27] ManagementExtensions OPTIONAL,
	mMBoxstorageInformation		[28] MMBoxStorageInformation OPTIONAL,
	mscfInformation				[29] MSCFInformation OPTIONAL,
	sGSNPLMNIdentifier			[30] PLMN-Id OPTIONAL,
	rATType						[31] RATType OPTIONAL,
	mSTimeZone 					[32] MSTimeZone OPTIONAL
}

MMO4FRqRecord		::= SET
{
	recordType					[0]  RecordType,
	originatorMmsRSAddress		[1]  MMSRSAddress,
	recipientMmsRSAddress		[2]  MMSRSAddress,
	messageID					[3]  OCTET STRING,
	mms3GPPVersion				[4]  OCTET STRING OPTIONAL,
	originatorAddress			[5]  MMSAgentAddress,
	recipientAddresses			[6]  MMSAgentAddresses,
	contentType					[7]  ContentType, 
	mmComponentType				[8]  MMComponentType OPTIONAL,
	messageSize					[9]  DataVolume,	
	messageClass				[10] MessageClass OPTIONAL,
	submissionTime				[11] TimeStamp, 
	timeOfExpiry				[12] WaitTime OPTIONAL,
	deliveryReportRequested		[13] BOOLEAN,
	priority					[14] PriorityType OPTIONAL,
	senderVisibility			[15] BOOLEAN,
	readReplyRequested			[16] BOOLEAN,
	acknowledgementRequest		[17] BOOLEAN,
	forwardCounter				[18] INTEGER OPTIONAL,
	forwardingAddress			[19] MMSAgentAddresses OPTIONAL,
	recordTimeStamp				[20] TimeStamp,
	localSequenceNumber			[21] LocalSequenceNumber OPTIONAL,
	recordExtensions			[22] ManagementExtensions OPTIONAL
}
 
MMO4FRsRecord		::= SET
{
	recordType					[0]  RecordType,
	originatorMmsRSAddress		[1]  MMSRSAddress OPTIONAL,
	recipientMmsRSAddress		[2]  MMSRSAddress,
	messageID					[3]  OCTET STRING,
	mms3GPPVersion				[4]  OCTET STRING OPTIONAL,
	requestStatusCode			[5] RequestStatusCodeType OPTIONAL,
	statusText					[6] StatusTextType OPTIONAL, 
	recordTimeStamp				[7] TimeStamp OPTIONAL,
	localSequenceNumber			[8] LocalSequenceNumber OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL
}

MMO4DRecord		::= SET
{
	recordType					[0]  RecordType,
	recipientMmsRSAddress		[1]  MMSRSAddress OPTIONAL,
	originatorMmsRSAddress		[2]  MMSRSAddress OPTIONAL,
	messageID					[3]  OCTET STRING,
	mms3GPPVersion				[4]  OCTET STRING OPTIONAL,
	originatorAddress			[5]  MMSAgentAddress OPTIONAL,
	recipientAddress			[6]  MMSAgentAddress,
	mmDateAndTime				[7] TimeStamp,
	acknowledgementRequest		[8] BOOLEAN,
	mmStatusCode				[9] MMStatusCodeType,
	statusText					[10] StatusTextType OPTIONAL, 
	recordTimeStamp				[11] TimeStamp OPTIONAL,
	localSequenceNumber			[12] LocalSequenceNumber OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL
}

MMO1DRecord		::= SET
{
	recordType					[0]  RecordType,
	recipientMmsRSAddress		[1]  MMSRSAddress OPTIONAL,
	originatorMmsRSAddress		[2]  MMSRSAddress OPTIONAL,
	accessCorrelation			[3] AccessCorrelation OPTIONAL, 
	messageID					[4]  OCTET STRING,
	mms3GPPVersion				[5]  OCTET STRING OPTIONAL,
	originatorAddress			[6]  MMSAgentAddress OPTIONAL,
	recipientAddress			[7]  MMSAgentAddress,
	mmStatusCode				[8] MMStatusCodeType OPTIONAL,
	recordTimeStamp				[9] TimeStamp OPTIONAL,
	localSequenceNumber			[10] LocalSequenceNumber OPTIONAL,
	recordExtensions			[11] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[12] PLMN-Id OPTIONAL,
	rATType						[13] RATType OPTIONAL,
	mSTimeZone 					[14] MSTimeZone OPTIONAL
}

MMO4RRecord		::= SET
{
	recordType					[0]  RecordType,
	recipientMmsRSAddress		[1]  MMSRSAddress OPTIONAL,
	originatorMmsRSAddress		[2]  MMSRSAddress OPTIONAL,
	messageID					[3]  OCTET STRING,
	mms3GPPVersion				[4]  OCTET STRING OPTIONAL,
	originatorAddress			[5]  MMSAgentAddress OPTIONAL,
	recipientAddresses			[6]  MMSAgentAddresses OPTIONAL,
	mmDateAndTime				[7] TimeStamp OPTIONAL,
	acknowledgementRequest		[8] BOOLEAN,
	readStatus					[9] MMStatusCodeType OPTIONAL,
	statusText					[10] StatusTextType OPTIONAL, 
	recordTimeStamp				[11] TimeStamp OPTIONAL,
	localSequenceNumber		   	[12] LocalSequenceNumber OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL
}

MMO1RRecord		::= SET
{
	recordType					[0]  RecordType,
	recipientMmsRSAddress		[1]  MMSRSAddress OPTIONAL,
	originatorMmsRSAddress		[2]  MMSRSAddress OPTIONAL,
	accessCorrelation			[3] AccessCorrelation OPTIONAL, 
	messageID					[4]  OCTET STRING,
	mms3GPPVersion				[5]  OCTET STRING OPTIONAL,
	originatorAddress			[6]  MMSAgentAddress OPTIONAL,
	recipientAddress			[7]  MMSAgentAddress OPTIONAL,
	readStatus					[8] MMStatusCodeType OPTIONAL,
	recordTimeStamp				[9] TimeStamp OPTIONAL,
	localSequenceNumber			[10] LocalSequenceNumber OPTIONAL,
	recordExtensions			[11] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[12] PLMN-Id OPTIONAL,
	rATType						[13] RATType OPTIONAL,
	mSTimeZone 					[14] MSTimeZone OPTIONAL
}

MMOMDRecord		::= SET
{
	recordType					[0]  RecordType,
	originatorMmsRSAddress		[1]  MMSRSAddress OPTIONAL,
	recipientMmsRSAddress		[2]  MMSRSAddress OPTIONAL,
	messageID					[3]  OCTET STRING,
	messageSize					[4] DataVolume OPTIONAL,
	mmStatusCode				[5] MMStatusCodeType OPTIONAL,
	statusText					[6] StatusTextType OPTIONAL, 
	recordTimeStamp				[7] TimeStamp OPTIONAL,
	localSequenceNumber			[8] LocalSequenceNumber OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL
}

MMR4FRecord		::= SET
{
	recordType					[0]  RecordType,
	recipientMmsRSAddress		[1]  MMSRSAddress,
	originatorMmsRSAddress		[2]  MMSRSAddress,
	messageID					[3]  OCTET STRING,
	mms3GPPVersion				[4]  OCTET STRING OPTIONAL,
	originatorAddress			[5]  MMSAgentAddress,
	recipientAddresses			[6]  MMSAgentAddresses,
	contentType					[7]  ContentType, 
	mmComponentType				[8]  MMComponentType OPTIONAL,
	messageSize					[9]  DataVolume,	
	messageClass				[10] MessageClass OPTIONAL,
	submissionTime				[11] TimeStamp, 
	timeOfExpiry				[12] WaitTime OPTIONAL,
	deliveryReportRequested		[13] BOOLEAN,
	priority					[14] PriorityType OPTIONAL,
	senderVisibility			[15] BOOLEAN,
	readReplyRequested			[16] BOOLEAN,
	requestStatusCode			[17] RequestStatusCodeType,
	statusText					[18] StatusTextType,
	acknowledgementRequest		[19] BOOLEAN,
	forwardCounter				[20] INTEGER OPTIONAL,
	forwardingAddress			[21] MMSAgentAddresses OPTIONAL,
	recordTimeStamp				[22] TimeStamp,
	localSequenceNumber			[23] LocalSequenceNumber OPTIONAL,
	recordExtensions			[24] ManagementExtensions OPTIONAL
}

MMR1NRqRecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	messageID					[2] OCTET STRING,
	replyChargingID				[3] OCTET STRING OPTIONAL, 
	senderAddress				[4] MMSAgentAddress,
	recipientAddress			[5] MMSAgentAddress,
	accessCorrelation			[6] AccessCorrelation OPTIONAL, 
	messageClass				[7] MessageClass OPTIONAL,
	mmComponentType				[8] MMComponentType OPTIONAL,
	messageSize					[9] DataVolume,
	timeOfExpiry				[10] WaitTime OPTIONAL,
	messageReference 			[11] OCTET STRING,
	deliveryReportRequested		[12] BOOLEAN OPTIONAL,
	replyCharging				[13] BOOLEAN OPTIONAL,
	replyDeadline				[14] WaitTime OPTIONAL,
	replyChargingSize			[15] DataVolume OPTIONAL,
	mmStatusCode				[16] MMStatusCodeType OPTIONAL,
	statusText					[17] StatusTextType OPTIONAL,
	recordTimeStamp				[18] TimeStamp OPTIONAL, 	
	localSequenceNumber			[19] LocalSequenceNumber OPTIONAL,
	recordExtensions			[20] ManagementExtensions OPTIONAL,
	mscfInformation				[21] MSCFInformation OPTIONAL,
	vaspID						[22] OCTET STRING OPTIONAL,
	vasID						[23] OCTET STRING OPTIONAL,
	sGSNPLMNIdentifier			[24] PLMN-Id OPTIONAL,
	rATType						[25] RATType OPTIONAL,
	mSTimeZone 					[26] MSTimeZone OPTIONAL
}

MMR1NRsRecord		::= SET
{
	recordType					[0]  RecordType,
	recipientMmsRSAddress		[1]  MMSRSAddress,
	messageID					[2]  OCTET STRING,
	recipientAddress			[3] MMSAgentAddress,
	accessCorrelation			[4] AccessCorrelation OPTIONAL, 
	reportAllowed				[5] BOOLEAN OPTIONAL,
	mmStatusCode				[6] MMStatusCodeType OPTIONAL,
	statusText					[7] StatusTextType OPTIONAL, 
	recordTimeStamp				[8] TimeStamp OPTIONAL,
	localSequenceNumber			[9] LocalSequenceNumber OPTIONAL,
	recordExtensions			[10] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[11] PLMN-Id OPTIONAL,
	rATType						[12] RATType OPTIONAL,
	mSTimeZone 					[13] MSTimeZone OPTIONAL
}

MMR1RtRecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	messageID					[2] OCTET STRING,
	replyChargingID				[3] OCTET STRING OPTIONAL, 
	senderAddress				[4] MMSAgentAddress OPTIONAL,
	recipientAddress			[5] MMSAgentAddress,
	accessCorrelation			[6] AccessCorrelation OPTIONAL, 
	contentType					[7] ContentType, 
	mmComponentType				[8] MMComponentType OPTIONAL,
	messageClass				[9] MessageClass OPTIONAL,
	submissionTime				[10] TimeStamp, 
	messageSize					[11] DataVolume OPTIONAL,
	deliveryReportRequested		[12] BOOLEAN OPTIONAL,
	priority					[13] PriorityType OPTIONAL,
	readReplyRequested			[14] BOOLEAN OPTIONAL,
	mmStatusCode				[15] MMStatusCodeType OPTIONAL,
	statusText					[16] StatusTextType OPTIONAL,
	replyDeadline				[17] WaitTime OPTIONAL,
	replyChargingSize			[18] DataVolume OPTIONAL,
	durationOfTransmission		[19] INTEGER OPTIONAL,
	timeOfExpiry				[20] WaitTime OPTIONAL,
	recordTimeStamp				[21] TimeStamp OPTIONAL, 	
	localSequenceNumber			[22] LocalSequenceNumber OPTIONAL,
	recordExtensions			[23] ManagementExtensions OPTIONAL,
	messageReference 			[24] OCTET STRING,
	vaspID						[25] OCTET STRING OPTIONAL,
	vasID						[26] OCTET STRING OPTIONAL,
	sGSNPLMNIdentifier			[27] PLMN-Id OPTIONAL,
	rATType						[28] RATType OPTIONAL,
	mSTimeZone 					[29] MSTimeZone OPTIONAL
}

MMR1ARecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	messageID					[2] OCTET STRING,
	recipientAddress			[3] MMSAgentAddress,
	accessCorrelation			[4] AccessCorrelation OPTIONAL, 
	reportAllowed				[5] BOOLEAN OPTIONAL,
	mmStatusCode				[6] MMStatusCodeType OPTIONAL,
	statusText					[7] StatusTextType OPTIONAL, 
	recordTimeStamp				[8] TimeStamp OPTIONAL,
	localSequenceNumber			[9] LocalSequenceNumber OPTIONAL,
	recordExtensions			[10] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[11] PLMN-Id OPTIONAL,
	rATType						[12] RATType OPTIONAL,
	mSTimeZone 					[13] MSTimeZone OPTIONAL
}

MMR4DRqRecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	originatorMmsRSAddress		[2] MMSRSAddress,
	messageID					[3] OCTET STRING,
	mms3GPPVersion				[4] OCTET STRING OPTIONAL,
	originatorAddress			[5] MMSAgentAddress,
	recipientAddress			[6] MMSAgentAddress,
	mmDateAndTime				[7] TimeStamp OPTIONAL,
	acknowledgementRequest		[8] BOOLEAN,
	mmStatusCode				[9] MMStatusCodeType OPTIONAL,
	statusText					[10] StatusTextType OPTIONAL, 
	recordTimeStamp				[11] TimeStamp OPTIONAL,
	localSequenceNumber			[12] LocalSequenceNumber OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL
}

MMR4DRsRecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	originatorMmsRSAddress		[2] MMSRSAddress,
	messageID					[3] OCTET STRING,
	mms3GPPVersion				[4] OCTET STRING OPTIONAL,
	requestStatusCode			[5] RequestStatusCodeType OPTIONAL,
	statusText					[6] StatusTextType OPTIONAL, 
	recordTimeStamp				[7] TimeStamp OPTIONAL,
	localSequenceNumber			[8] LocalSequenceNumber OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL
}

MMR1RRRecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	messageID					[2] OCTET STRING,
	recipientAddress			[3] MMSAgentAddress,
	originatorAddress			[4] MMSAgentAddress,
	accessCorrelation			[5] AccessCorrelation OPTIONAL, 
	mmStatusCode				[6] MMStatusCodeType OPTIONAL,
	statusText					[7] StatusTextType OPTIONAL, 
	recordTimeStamp				[8] TimeStamp OPTIONAL,
	localSequenceNumber			[9] LocalSequenceNumber OPTIONAL,
	recordExtensions			[10] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[11] PLMN-Id OPTIONAL,
	rATType						[12] RATType OPTIONAL,
	mSTimeZone 					[13] MSTimeZone OPTIONAL
}

MMR4RRqRecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	originatorMmsRSAddress		[2] MMSRSAddress,
	messageID					[3] OCTET STRING,
	mms3GPPVersion				[4] OCTET STRING OPTIONAL,
	originatorAddress			[5] MMSAgentAddress,
	recipientAddress			[6] MMSAgentAddress,
	mmDateAndTime				[7] TimeStamp OPTIONAL,
	acknowledgementRequest		[8] BOOLEAN,
	mmStatusCode				[9] MMStatusCodeType OPTIONAL,
	statusText					[10] StatusTextType OPTIONAL, 
	recordTimeStamp				[11] TimeStamp OPTIONAL,
	localSequenceNumber			[12] LocalSequenceNumber OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL
}

MMR4RRsRecord		::= SET
{
	recordType					[0] RecordType,
	recipientMmsRSAddress		[1] MMSRSAddress,
	originatorMmsRSAddress		[2] MMSRSAddress,
	messageID					[3] OCTET STRING,
	mms3GPPVersion				[4] OCTET STRING OPTIONAL,
	requestStatusCode			[5] RequestStatusCodeType OPTIONAL,
	statusText					[6] StatusTextType OPTIONAL, 
	recordTimeStamp				[7] TimeStamp OPTIONAL,
	localSequenceNumber			[8] LocalSequenceNumber OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL
}

MMRMDRecord		::= SET
{
	recordType					[0] RecordType,
	originatorMmsRSAddress		[1] MMSRSAddress,
	recipientMmsRSAddress		[2] MMSRSAddress OPTIONAL,
	messageID					[3] OCTET STRING,
	messageSize					[4] DataVolume,
	mmStatusCode				[5] MMStatusCodeType OPTIONAL,
	statusText					[6] StatusTextType OPTIONAL, 
	recordTimeStamp				[7] TimeStamp OPTIONAL,
	localSequenceNumber			[8] LocalSequenceNumber OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL
}

MMFRecord		::= SET
{
	recordType					[0] RecordType,
	forwardingMmsRSAddress		[1] MMSRSAddress,
	messageID					[2] OCTET STRING,
	forwardingAddress			[3] MMSAgentAddress,
	recipientAddresses			[4] MMSAgentAddresses,
	chargeInformation			[5] ChargeInformation OPTIONAL,
	timeOfExpiry				[6] WaitTime OPTIONAL,
	earliestTimeOfDelivery		[7] WaitTime OPTIONAL, 
	deliveryReportRequested		[8] BOOLEAN OPTIONAL,
	readReplyRequested			[9] BOOLEAN OPTIONAL,
	messageReference 			[10] OCTET STRING,
	mmStatusCode				[11] MMStatusCodeType OPTIONAL,
	statusText					[12] StatusTextType OPTIONAL,
	recordTimeStamp				[13] TimeStamp OPTIONAL,
	localSequenceNumber			[14] LocalSequenceNumber OPTIONAL,
	recordExtensions			[15] ManagementExtensions OPTIONAL,
	mMBoxstorageInformation		[16] MMBoxStorageInformation OPTIONAL
}

MMBx1SRecord	::= SET
{
	recordType				[0]  RecordType,
	mmsRelayAddress			[1]  IPAddress,
	managingAddress			[2]  MMSAgentAddress,
	accessCorrelation		[3]  AccessCorrelation OPTIONAL,
	contentType				[4]  ContentType OPTIONAL, 
	messageSize				[5]  DataVolume OPTIONAL,
	messageReference		[6]  OCTET STRING OPTIONAL,
	mmState					[7]  OCTET STRING OPTIONAL,
	mmFlags					[8]  OCTET STRING OPTIONAL,
	storeStatus				[9]  StoreStatus OPTIONAL,
	storeStatusText			[10] StatusTextType OPTIONAL,
	sequenceNumber			[11] INTEGER OPTIONAL,
	timeStamp				[12] TimeStamp OPTIONAL,
	recordExtensions		[13] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier		[14] PLMN-Id OPTIONAL,
	rATType					[15] RATType OPTIONAL,
	mSTimeZone 				[16] MSTimeZone OPTIONAL
}

MMBx1VRecord	::= SET
{
	recordType					[0] RecordType,
	mmsRelayAddress				[1] IPAddress,
	managingAddress				[2] MMSAgentAddress,
	accessCorrelation			[3] AccessCorrelation OPTIONAL,
	attributesList				[4] AttributesList OPTIONAL,
	messageSelection			[5] MessageSelection OPTIONAL,
	start						[6] INTEGER OPTIONAL,
	limit						[7] INTEGER OPTIONAL,
	totalsRequested				[8] BOOLEAN OPTIONAL,
	quotasRequested				[9] BOOLEAN OPTIONAL,
	mmListing					[10] AttributesList OPTIONAL,
	requestStatusCode			[11] RequestStatusCodeType OPTIONAL,
	statusText					[12] StatusTextType OPTIONAL, 
	totals						[13] Totals OPTIONAL,
	quotas						[14] Quotas OPTIONAL,
	sequenceNumber				[15] INTEGER OPTIONAL,
	timeStamp					[16] TimeStamp OPTIONAL,
	recordExtensions			[17] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[18] PLMN-Id OPTIONAL,
	rATType						[19] RATType OPTIONAL,
	mSTimeZone 					[20] MSTimeZone OPTIONAL
}

MMBx1URecord	::= SET
{
	recordType					[0] RecordType,
	mmsRelayAddress				[1] IPAddress,
	managingAddress				[2] MMSAgentAddress,
	accessCorrelation			[3] AccessCorrelation OPTIONAL,
	recipientsAddressList		[4] MMSAgentAddresses,
	messageClass				[5] MessageClass OPTIONAL,
	uploadTime					[6] TimeStamp OPTIONAL, 
	timeOfExpiry				[7] WaitTime OPTIONAL,
	earliestTimeOfDelivery		[8] WaitTime OPTIONAL, 
	priority					[9] PriorityType OPTIONAL,
	mmState						[10] OCTET STRING OPTIONAL,
	mmFlags						[11] OCTET STRING OPTIONAL,
	contentType					[12] ContentType OPTIONAL, 
	messageSize					[13] DataVolume OPTIONAL,
	messageReference			[14] OCTET STRING OPTIONAL,
	requestStatusCode			[15] RequestStatusCodeType OPTIONAL,
	statusText					[16] StatusTextType OPTIONAL, 
	sequenceNumber				[17] INTEGER OPTIONAL,
	timeStamp					[18] TimeStamp OPTIONAL,
	recordExtensions			[19] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[20] PLMN-Id OPTIONAL,
	rATType						[21] RATType OPTIONAL,
	mSTimeZone 					[22] MSTimeZone OPTIONAL
}

MMBx1DRecord	::= SET
{
	recordType					[0] RecordType,
	mmsRelayAddress				[1] IPAddress,
	managingAddress				[2] MMSAgentAddress,
	accessCorrelation			[3] AccessCorrelation OPTIONAL,
	messageReference			[4] OCTET STRING OPTIONAL,
	requestStatusCode			[5] RequestStatusCodeType OPTIONAL,
	statusText					[6] StatusTextType OPTIONAL, 
	sequenceNumber				[7] INTEGER OPTIONAL,
	timeStamp					[8] TimeStamp OPTIONAL,
	recordExtensions			[9] ManagementExtensions OPTIONAL,
	sGSNPLMNIdentifier			[20] PLMN-Id OPTIONAL,
	rATType						[21] RATType OPTIONAL,
	mSTimeZone 					[22] MSTimeZone OPTIONAL
}

MM7SRecord	::= SET
{
	recordType						[0] RecordType,
	originatorMmsRSAddress			[1] MMSRSAddress,
	linkedID						[2] OCTET STRING OPTIONAL,
	vaspID							[3] OCTET STRING,
	vasID							[4] OCTET STRING,
	messageID						[5] OCTET STRING,
	originatorAddress				[6] MMSAgentAddress,
	recipientAddresses				[7] MMSAgentAddresses,
	serviceCode						[8] OCTET STRING OPTIONAL,
	contentType						[9] ContentType, 
	mmComponentType					[10] MMComponentType OPTIONAL,
	messageSize						[11] DataVolume,
	messageClass					[12] MessageClass OPTIONAL,
	chargeInformation				[13] ChargeInformation OPTIONAL,
	submissionTime					[14] TimeStamp OPTIONAL, 
	timeOfExpiry					[15] WaitTime OPTIONAL,
	earliestTimeOfDelivery			[16] WaitTime OPTIONAL, 
	deliveryReportRequested			[17] BOOLEAN OPTIONAL,
	readReplyRequested				[18] BOOLEAN OPTIONAL,
	replyCharging					[19] BOOLEAN OPTIONAL,
	replyDeadline					[20] WaitTime OPTIONAL,
	replyChargingSize				[21] DataVolume OPTIONAL,
	priority						[22] PriorityType OPTIONAL,
	messageDistributionIndicator	[23] BOOLEAN OPTIONAL,
	requestStatusCode				[24] RequestStatusCodeType OPTIONAL,
	statusText						[25] StatusTextType OPTIONAL,
	recordTimeStamp					[26] TimeStamp,
	localSequenceNumber				[27] LocalSequenceNumber OPTIONAL,
	recordExtensions				[28] ManagementExtensions OPTIONAL,
	mscfInformation					[29] MSCFInformation OPTIONAL
}

MM7DRqRecord		::= SET
{
	recordType				[0] RecordType,
	recipientMmsRSAddress	[1] MMSRSAddress,
	linkedID				[2] OCTET STRING OPTIONAL,
	replyChargingID			[3] OCTET STRING OPTIONAL, 
	originatorAddress		[4] MMSAgentAddress,
	recipientAddress		[5] MMSAgentAddress,
	mmComponentType			[6] MMComponentType OPTIONAL,
	messageSize				[7] DataVolume,
	contentType				[8] ContentType,
	priority				[9] PriorityType OPTIONAL,
	recordTimeStamp			[10] TimeStamp OPTIONAL, 	
	localSequenceNumber		[11] LocalSequenceNumber OPTIONAL,
	recordExtensions		[12] ManagementExtensions OPTIONAL
}

MM7DRsRecord		::= SET
{
	recordType				[0] RecordType,
	recipientMmsRSAddress	[1] MMSRSAddress,
	messageID				[2] OCTET STRING,
	recipientAddress		[3] MMSAgentAddress,
	serviceCode				[4] OCTET STRING OPTIONAL,
	requestStatusCode		[5] RequestStatusCodeType OPTIONAL,
	statusText				[6] StatusTextType OPTIONAL,
	recordTimeStamp			[7] TimeStamp OPTIONAL,
	localSequenceNumber		[8] LocalSequenceNumber OPTIONAL,
	recordExtensions		[9] ManagementExtensions OPTIONAL
}

MM7CRecord		::= SET
{
	recordType				[0] RecordType,
	originatorMmsRSAddress	[1] MMSRSAddress,
	vaspID					[2] OCTET STRING,
	vasID					[3] OCTET STRING,
	messageID				[4] OCTET STRING,
	originatorAddress		[5] MMSAgentAddress,
	serviceCode				[6] OCTET STRING OPTIONAL,
	requestStatusCode		[7] RequestStatusCodeType OPTIONAL,
	statusText				[8] StatusTextType OPTIONAL,
	recordTimeStamp			[9] TimeStamp OPTIONAL,
	localSequenceNumber		[10] LocalSequenceNumber OPTIONAL,
	recordExtensions		[11] ManagementExtensions OPTIONAL
}

MM7RRecord		::= SET
{
	recordType				[0] RecordType,
	originatorMmsRSAddress	[1] MMSRSAddress,
	vaspID					[2] OCTET STRING,
	vasID					[3] OCTET STRING,
	messageID				[4] OCTET STRING,
	originatorAddress		[5] MMSAgentAddress,
	serviceCode				[6] OCTET STRING OPTIONAL,
	contentType				[7] ContentType,
	submissionTime			[8] TimeStamp OPTIONAL,
	timeOfExpiry			[9] WaitTime OPTIONAL,
	earliestTimeOfDelivery	[10] WaitTime OPTIONAL,
	requestStatusCode		[11] RequestStatusCodeType OPTIONAL,
	statusText				[12] StatusTextType OPTIONAL,
	recordTimeStamp			[13] TimeStamp OPTIONAL,
	localSequenceNumber		[14] LocalSequenceNumber OPTIONAL,
	recordExtensions		[15] ManagementExtensions OPTIONAL
}

MM7DRRqRecord		::= SET
{
	recordType				[0] RecordType,
	recipientMmsRSAddress	[1] MMSRSAddress OPTIONAL,
	messageID				[2] OCTET STRING,
	originatorAddress		[3] MMSAgentAddress OPTIONAL,
	recipientAddress		[4] MMSAgentAddress,
	mmDateAndTime			[5] TimeStamp OPTIONAL,
	mmStatusCode			[6] MMStatusCodeType,
	mmStatusText			[7] StatusTextType OPTIONAL,
	recordTimeStamp			[8] TimeStamp OPTIONAL,
	localSequenceNumber		[9] LocalSequenceNumber OPTIONAL,
	recordExtensions		[10] ManagementExtensions OPTIONAL
}

MM7DRRsRecord		::= SET
{
	recordType				[0] RecordType,
	recipientMmsRSAddress	[1] MMSRSAddress OPTIONAL,
	messageID				[2] OCTET STRING,
	originatorAddress		[3] MMSAgentAddress OPTIONAL,
	recipientAddress		[4] MMSAgentAddress,
	requestStatusCode		[5] RequestStatusCodeType OPTIONAL,
	statusText				[6] StatusTextType OPTIONAL,
	recordTimeStamp			[7] TimeStamp OPTIONAL,
	localSequenceNumber		[8] LocalSequenceNumber OPTIONAL,
	recordExtensions		[9] ManagementExtensions OPTIONAL
}

MM7RRqRecord		::= SET
{
	recordType				[0] RecordType,
	recipientMmsRSAddress	[1] MMSRSAddress OPTIONAL,
	messageID				[2] OCTET STRING,
	originatorAddress		[3] MMSAgentAddress OPTIONAL,
	recipientAddress		[4] MMSAgentAddress,
	mmDateAndTime			[5] TimeStamp OPTIONAL,
	readStatus				[6] MMStatusCodeType,
	mmStatusText			[7] StatusTextType OPTIONAL,
	recordTimeStamp			[8] TimeStamp OPTIONAL,
	localSequenceNumber		[9] LocalSequenceNumber OPTIONAL,
	recordExtensions		[10] ManagementExtensions OPTIONAL
}

MM7RRsRecord		::= SET
{
	recordType				[0] RecordType,
	recipientMmsRSAddress	[1] MMSRSAddress OPTIONAL,
	messageID				[2] OCTET STRING,
	originatorAddress		[3] MMSAgentAddress OPTIONAL,
	recipientAddress		[4] MMSAgentAddress,
	requestStatusCode		[5] RequestStatusCodeType OPTIONAL,
	statusText				[6] StatusTextType OPTIONAL,
	recordTimeStamp			[7] TimeStamp OPTIONAL,
	localSequenceNumber		[8] LocalSequenceNumber OPTIONAL,
	recordExtensions		[9] ManagementExtensions OPTIONAL
}

--
--  MMS DATA TYPES
--

AccessCorrelation ::= CHOICE
{
	circuitSwitched			[0]	CircuitSwitchedAccess,
	packetSwitched			[1]	PacketSwitchedAccess
}

AttributesList			::= SEQUENCE
--
-- Note: the values below are subject to WAP Forum ongoing standardization
--
{
	messageID		[0]  OCTET STRING,
	dateAndTime		[1]  TimeStamp,
	senderAddress	[2]  MMSRSAddress,
	subject			[3]  OCTET STRING,
	messageSize		[4]  DataVolume ,
	mmFlags			[5]  OCTET STRING,
	mmState			[6]  MMState
}

ChargeInformation	::= SEQUENCE
--
-- one of the two following parameters must be present
--
{
	chargedparty		[0]  ChargedParty OPTIONAL,
	chargetype			[1]  ChargeType OPTIONAL
}

ChargedParty	::= ENUMERATED
{
	sender				(0),
	recipient			(1),
	both				(2),
	neither				(3),
	notspecifiedbyVASP	(99)
}

ChargeType			::= ENUMERATED
{
	postpaid				(0),
	pre-paid				(1)
}

CircuitSwitchedAccess ::= SEQUENCE 
{
	mSCIdentifier			[0]  MscNo,
	callReferenceNumber		[1]  CallReferenceNumber
}

ContentType			::= OCTET STRING

DataVolume			::= INTEGER
--
-- The volume of data transfered in octets.
--

DeltaSeconds		::= OCTET STRING (SIZE(8))

MediaComponent	::= SEQUENCE
{
	mediaType		[0]  OCTET STRING, 
	mediaSize		[1]  DataVolume
}
 
MediaComponents	::= SET OF MediaComponent

MessageSelection ::= INTEGER

MMBoxStorageInformation   	::= SET
{
	mmState					[0]  MMState,
	mmFlag					[1]  OCTET STRING,
	storeStatus				[2]  StoreStatus,
	storeStatusText			[3]  StatusTextType,
	storedMessageReference	[4]  OCTET STRING
}

MMComponentType		::= SEQUENCE
{	
	subject		[0]  SubjectComponent,
	media		[1]  MediaComponents
}

MMSAgentAddress		::= SEQUENCE
--
-- mMSRecipeintType is only included when this datatype is used to identify recipients.
--
{
	mMSAgentAddressData	[0]  MMSAgentAddressData,
	mMSRecipientType	[1]  SEQUENCE OF MMSRecipientType OPTIONAL 
}

MMSAgentAddresses	::= SET OF MMSAgentAddress

MMSAgentAddressData	::= CHOICE
{
	eMail-address	[0]  OCTET STRING,
	mSISDN			[1]  MSISDN,
	shortCode		[2]  OCTET STRING
}

MMSRecipientType	::= ENUMERATED
{
	tO				(0),
	cC				(1),
	bCC				(2)
}

MMSRSAddress		::= SEQUENCE  
--
-- usage of SEQUENCE instead of CHOICE allows both address types to be present at the same time
--
{
	domainName		[0]  OCTET STRING OPTIONAL,
	iPAddress		[2]  IPAddress OPTIONAL
}

MMState		::= ENUMERATED
--
-- Note: the values below are subject to WAP Forum ongoing standardization
--
{
	draft			(0),
	sent			(1),
	new				(2),
	retrieved		(3),
	forwarded		(4)
}

MMStatusCodeType		::= ENUMERATED
{
	retrieved					(0),
	forwarded					(1),
	expired						(2),
	rejected					(3),
	deferred					(4),
	unrecognised				(5),
	read						(6),
	deletedWithoutBeingRead 	(7)
}

MSCFInformation		::= SET
{
	billingInformation		[0]  OCTET STRING OPTIONAL,
	routeingAddressList		[1]  RouteingAddressList OPTIONAL
}

PacketSwitchedAccess ::= SEQUENCE 
{
	gSNAddress		[0]  GSNAddress,
	chargingID		[1] ChargingID
}


Quotas	::= SEQUENCE
{
	numberOfMessages	[0] INTEGER OPTIONAL,
	numberOfOctets		[1] INTEGER OPTIONAL
}

RequestStatusCodeType	::= INTEGER
--
-- cause codes 0 to 15 are used as defined for 'CauseForTerm'
-- (cause for termination) and 16 to 20 are as defined for 'CauseForRecClosing'
--
{
	normalRelease				(0),	-- ok
	abnormalRelease				(4),	-- error unspecified
	serviceDenied				(30),
	messageFormatCorrupt		(31),
	sendingAddressUnresolved	(32),
	messageNotFound				(33),
	networkProblem				(34),
	contentNotAccepted		 	(35),
	unsupportedMessage			(36)
}

RouteingAddress			::= SEQUENCE
--
-- usage of SEQUENCE instead of CHOICE allows several address types 
-- to be present at the same time
--
{	
	eMail-address		[0] OCTET STRING,
	mSISDN				[1] MSISDN OPTIONAL,
	shortCode			[2] OCTET STRING OPTIONAL
}

RouteingAddressList	::= SET OF MMSAgentAddress

StatusTextType		::= OCTET STRING

StoreStatus	::= INTEGER
--
-- Note: the values below are subject to WAP Forum ongoing standardization
--
{
	stored							(0),
	errorTransientFailure			(1),
	errorTransientMailboxFull		(2),
	errorTransientNetworkProblems	(3),
	errorPermanentFailure			(4),
	errorPermanentPermissionDenied	(5),
	errorPermanentMessageFormat		(6),
	errorPermanentMessageNotFound	(7)
}

SubjectComponent	::= SEQUENCE
{
	subjectType		[0] OCTET STRING,  
	subjectSize 	[1] DataVolume
}

Totals	::= SEQUENCE
{
	numberOfMessages		[0] INTEGER OPTIONAL,
	numberOfOctets			[1] INTEGER OPTIONAL
}

WaitTime		::= CHOICE
{
	http-date		[0]	TimeStamp,
	delta-seconds	[1]	DeltaSeconds 
}

.#END

5.2.4.2	LCS CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.271 [31].
.$LCSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) lcsChargingDataTypes (6) asn1Module (0) version2 (1)}

DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything

IMPORTS	


IPAddress,
LCSClientIdentity,
LocalSequenceNumber,
ManagementExtensions,
MSISDN,
PLMN-Id,
PositioningData,
RecordingEntity,
RecordType,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}
Ext-GeographicalInformation,
LCSClientType,
LCS-Priority,
LocationType
FROM MAP-LCS-DataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-LCS-DataTypes (25)  version18 (18) }
-- from TS 29.002 [214]

AddressString,
IMSI
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18)  version18 (18) }
-- from TS 29.002 [214]

;

--
--  LCS RECORDS
--

LCSRecord	::= CHOICE
--
-- Record values 71..75 are LCS specific
-- 
{
	lCSGMORecord		[71] LCSGMORecord,
	lCSRGMTRecord		[72] LCSRGMTRecord,
	lCSHGMTRecord		[73] LCSHGMTRecord,
	lCSVGMTRecord		[74] LCSVGMTRecord,
	lCSGNIRecord		[75] LCSGNIRecord
}

LCSGMORecord	::= SET
{
	recordType					[0] RecordType,
	recordingEntity				[1] RecordingEntity,
	lcsClientType				[2] LCSClientType OPTIONAL,
	lcsClientIdentity			[3] LCSClientIdentity OPTIONAL,
	servedIMSI					[4] IMSI,
	servedMSISDN				[5] MSISDN OPTIONAL,
	servingEntity				[6] ServingEntity OPTIONAL, 
	locationEstimate			[7] Ext-GeographicalInformation OPTIONAL,
	positioningData				[8] PositioningData OPTIONAL,
	userError					[9] UserError OPTIONAL,
	providerError				[10] ProviderError OPTIONAL,
	recordTimeStamp				[11] TimeStamp,
	localSequenceNumber			[12] LocalSequenceNumber OPTIONAL,
	recordExtensions			[13] ManagementExtensions OPTIONAL
}

LCSRGMTRecord	::= SET
{
	recordType					[0] RecordType,
	recordingEntity				[1] RecordingEntity,
	lcsClientType				[2] LCSClientType OPTIONAL,
	lcsClientIdentity			[3] LCSClientIdentity OPTIONAL,
	targetIMSI					[4] IMSI,
	targetMSISDN				[5] MSISDN OPTIONAL,
	locationType				[6] LocationType, 
	lCSPriority					[7] LCS-Priority OPTIONAL, 
	resultCode					[8] ResultCodeType OPTIONAL,
	recordTimeStamp				[9] TimeStamp,
	localSequenceNumber			[10] LocalSequenceNumber OPTIONAL,
	recordExtensions			[11] ManagementExtensions OPTIONAL,
	homeGMLCIdentity			[12] IPAddress OPTIONAL
}

LCSHGMTRecord	::= SET
{
	recordType					[0] RecordType,
	recordingEntity				[1] RecordingEntity,
	lcsClientType				[2] LCSClientType OPTIONAL,
	lcsClientIdentity			[3] LCSClientIdentity OPTIONAL, 
	targetIMSI					[4] IMSI,
	targetMSISDN				[5] MSISDN OPTIONAL,
	locationType				[6] LocationType, 
	lCSPriority					[7] LCS-Priority OPTIONAL, 
	resultCode					[8] ResultCodeType OPTIONAL,
	recordTimeStamp				[9] TimeStamp,
	localSequenceNumber			[10] LocalSequenceNumber OPTIONAL,
	recordExtensions			[11] ManagementExtensions OPTIONAL,
	requestingGMLCIdentity		[12] IPAddress OPTIONAL,
	visitedGMLCIdentity			[13] IPAddress OPTIONAL,
	servingNetworkIdentity		[14] PLMN-Id OPTIONAL
}

LCSVGMTRecord	::= SET
{
	recordType					[0] RecordType,
	recordingEntity				[1] RecordingEntity,
	lcsClientType				[2] LCSClientType OPTIONAL,
	lcsClientIdentity			[3] LCSClientIdentity OPTIONAL, 
	targetIMSI					[4] IMSI,
	targetMSISDN				[5] MSISDN OPTIONAL,
	locationType				[6] LocationType, 
	lCSPriority					[7] LCS-Priority OPTIONAL, 
	resultCode					[8] ResultCodeType OPTIONAL,
	recordTimeStamp				[9] TimeStamp,
	localSequenceNumber			[10] LocalSequenceNumber OPTIONAL,
	recordExtensions			[11] ManagementExtensions OPTIONAL,
	homeGMLCIdentity			[12] IPAddress OPTIONAL
}

LCSGNIRecord	::= SET
{
	recordType					[0] RecordType,
	recordingEntity				[1] RecordingEntity,
	lcsClientType				[2] LCSClientType OPTIONAL,
	lcsClientIdentity			[3] LCSClientIdentity OPTIONAL, 
	servedIMSI					[4] IMSI,
	servedMSISDN				[5] MSISDN OPTIONAL,
	servingEntity				[6] ServingEntity OPTIONAL,
	resultCode					[7] ResultCodeType OPTIONAL,
	recordTimeStamp				[8] TimeStamp,
	localSequenceNumber			[9] LocalSequenceNumber OPTIONAL,
	recordExtensions			[10] ManagementExtensions OPTIONAL
}

--
--  LCS DATA TYPES
--

ProviderError	::= INTEGER
--
-- see ITU-T Q.733 [307] for invoke problem codes
--

ResultCodeType			::= INTEGER (0..MAX)
--
-- Result codes as defined in OMA-MLP Specifications [311]
--

ServingEntity ::= AddressString

UserError	::= OCTET STRING (SIZE (1))
--
-- see TS 29.002 [214] for error code values
--


.#END

5.2.4.3	PoC CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.272 [32].
.$POCChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) pocChargingDataTypes (7) asn1Module (0) version2 (1)}

DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS	

CallDuration,
InvolvedParty,
LocalSequenceNumber,
ManagementExtensions,
NodeAddress,
NodeID,
RecordType,
ServiceContextID,
Session-Id,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

GSNAddress 
FROM GPRSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) gprsChargingDataTypes (2) asn1Module (0) version2 (1)}

IMS-Charging-Identifier,
Incomplete-CDR-Indication,
InterOperatorIdentifiers,
MessageBody,
Media-Components-List,
SIP-Method
FROM IMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) imsChargingDataTypes (4) asn1Module (0) version2 (1)}

;

--
--  POC RECORDS
--

POCRecord	::= CHOICE 
--
-- Record values 80..81 are PoC specific
-- 
{
	pPFRecord			[80] PPFRecord,
	cPFRecord			[81] CPFRecord
}

PPFRecord 	::= SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	sIP-Method						[2] SIP-Method OPTIONAL,
	nodeAddress						[3] NodeAddress	OPTIONAL,
	session-Id						[4] Session-Id OPTIONAL,
	calling-Party-Address			[5] InvolvedParty OPTIONAL,
	called-Party-Address			[6] InvolvedParty OPTIONAL,
	servedParty						[7] GraphicString OPTIONAL,
	serviceRequestTimeStamp			[8] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp	[9] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp		[10] TimeStamp OPTIONAL,
	recordOpeningTime				[11] TimeStamp OPTIONAL,
	recordClosureTime				[12] TimeStamp OPTIONAL,
	interOperatorIdentifiers		[13] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber		[14] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber			[15] INTEGER OPTIONAL,
	causeForRecordClosing			[16] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication		[17] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier			[18] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components	[19] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress						[20] NodeAddress OPTIONAL,
	serviceReasonReturnCode			[21] UTF8String	OPTIONAL,
	list-Of-Message-Bodies			[22] SEQUENCE OF MessageBody OPTIONAL,
	userLocationInfo				[23] OCTET STRING OPTIONAL,
	poCInformation					[24] POCInformation	OPTIONAL,
	recordExtensions				[25] ManagementExtensions OPTIONAL,
	serviceContextID				[26] ServiceContextID OPTIONAL
}

CPFRecord		::=	SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	sIP-Method						[2] SIP-Method OPTIONAL,
	nodeAddress						[3] NodeAddress OPTIONAL,
	session-Id						[4] Session-Id OPTIONAL,
	calling-Party-Address			[5] InvolvedParty OPTIONAL,
	called-Party-Address			[6] InvolvedParty OPTIONAL,
	servedParty						[7] GraphicString OPTIONAL,
	serviceRequestTimeStamp			[8] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp	[9] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp		[10] TimeStamp OPTIONAL,
	recordOpeningTime				[11] TimeStamp OPTIONAL,
	recordClosureTime				[12] TimeStamp OPTIONAL,
	interOperatorIdentifiers		[13] InterOperatorIdentifiers OPTIONAL,
	localRecordSequenceNumber		[14] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber			[15] INTEGER OPTIONAL,
	causeForRecordClosing			[16] CauseForRecordClosing OPTIONAL,
	incomplete-CDR-Indication		[17] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier			[18] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components	[19] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress						[20] NodeAddress OPTIONAL,
	serviceReasonReturnCode			[21] UTF8String	OPTIONAL,
	list-Of-Message-Bodies			[22] SEQUENCE OF MessageBody OPTIONAL,
	userLocationInfo				[23] OCTET STRING OPTIONAL,
	poCInformation					[24] POCInformation OPTIONAL,
	recordExtensions				[25] ManagementExtensions OPTIONAL,
	serviceContextID				[26] ServiceContextID OPTIONAL
}

--
--  PoC DATA TYPES
--

AccessPriority			::= ENUMERATED
{
	pre-emptive 		   (0),
	high			       (1),
	normal 			 	   (2),
	low				       (3)
}

CauseForRecordClosing	::= ENUMERATED
{
	normalRelease					(0),
	abnormalRelease					(1),
	serviceChange					(2), -- e.g. change in media due to Re-Invite
	volumeLimit						(3),
	timeLimit						(4),
	numberofTalkBurstLimit			(5),
	maxChangeCond					(6),
	sessionTypeChange				(7),
	managementIntervention			(8)
}

ChangeCondition			::= ENUMERATED
{
	serviceChange					(0), -- e.g. change in media due to Re-Invite
	volumeLimit						(1),
	timeLimit						(2),
	numberofTalkBurstLimit			(3),
	numberofActiveParticipants		(4),
	tariffTime						(5)
}

ListofTalkBurstExchange			::= SET
{
	number-Of-Talk-Bursts			 [1] INTEGER OPTIONAL,
	talk-Burst-Volume				 [2] INTEGER OPTIONAL,		-- measured in octets
	talk-Bursts-Time				 [3] CallDuration OPTIONAL,
	number-Of-Received-Talk-Bursts	 [4] INTEGER OPTIONAL,
	received-Talk-Burst-Volume		 [5] INTEGER OPTIONAL,		-- measured in octets
	received-Talk-Burst-Time		 [6] CallDuration OPTIONAL,
	changeCondition					 [7] ChangeCondition OPTIONAL,
	changeTime						 [8] TimeStamp,
	numberofParticipants			 [9] INTEGER OPTIONAL
}

ParticipatingType				::=  ENUMERATED
{
	normal				(0),
	nW-PoC-Box			(1),
	uE-PoC-Box			(2)
}

POCEventType					::=  ENUMERATED
{
	normal					(0),
 	instantPersonalAlert				(1),
 	pOCGroupAdvertisement				(2),
	earlySessionSettingup				(3),
	pOCTalkBurst				(4)
}

POCInformation			::= SET
{
	pOCSessionType				[1] POCSessionType OPTIONAL,
	numberofParticipants		[2] INTEGER OPTIONAL,
	listofParticipants			[3] SEQUENCE OF POCParticipant OPTIONAL,
	listofTalkBurstExchange		[4] SEQUENCE OF ListofTalkBurstExchange OPTIONAL,
	pOCControllingAddress		[5] UTF8String OPTIONAL,
	pOCGroupName				[6] UTF8String OPTIONAL,
	pOCSessionId				[7] UTF8String OPTIONAL,
	pOCSessionInitiationType	[8] POCSessionInitType OPTIONAL,
	pOCEventType				[9] POCEventType OPTIONAL
}

POCParticipant			::= SET
{
	called-party-address			[1]	InvolvedParty,
	participant-access-priority		[2]	AccessPriority OPTIONAL,
	user-participating-type			[3]	ParticipatingType OPTIONAL
}

POCSessionInitType		::= ENUMERATED
{
	pre-established			(0),
	on-demand	  			(1)
}

POCSessionType			::= ENUMERATED
{
	one-to-one-session				(0),
	chat-group-session				(1),
	pre-arranged-group-session		(2),
	ad-hoc-group-session			(3)
}

.#END


5.2.4.4	MBMS CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.273 [33].
.$MBMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5)  mbmsChargingDataTypes (8) asn1Module (0) version2 (1)}

DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS	

CallDuration,
Diagnostics,
GSNAddress,
LocalSequenceNumber,
ManagementExtensions,
MBMSInformation,
MSISDN,
NodeID,
PDPAddress,
RecordType,
ServiceContextID,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

IMSI
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18)  version18 (18) }
-- from TS 29.002 [214]

AccessPointNameNI,
ChangeOfMBMSCondition,
PDPType
FROM GPRSChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) gprsChargingDataTypes (2) asn1Module (0) version2 (1)}
Media-Components-List
FROM IMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) imsChargingDataTypes (4) asn1Module (0) version2 (1)}

;

--
--  MBMS RECORDS
--

MBMSRecord	::= CHOICE 
--
-- Record values 78..79 are MBMS specific
-- 
{
	sUBBMSCRecord			[78] SUBBMSCRecord,
	cONTENTBMSCRecord		[79] CONTENTBMSCRecord
}

SUBBMSCRecord 	::= SET
{
	recordType					[0] RecordType,
	servedIMSI					[1] IMSI,
	ggsnAddress					[2] GSNAddress OPTIONAL,
	accessPointNameNI			[3] AccessPointNameNI OPTIONAL,
	servedPDPAddress			[4] PDPAddress OPTIONAL,
	listOfTrafficVolumes		[5] SEQUENCE OF ChangeOfMBMSCondition OPTIONAL,
	recordOpeningTime			[6] TimeStamp,
	duration					[7] CallDuration,
	causeForRecClosing			[8] MBMSCauseForRecClosing,
	diagnostics					[9] Diagnostics OPTIONAL,
	recordSequenceNumber		[10] INTEGER OPTIONAL,
	nodeID						[11] NodeID OPTIONAL,
	recordExtensions			[12] ManagementExtensions OPTIONAL,
	localSequenceNumber			[13] LocalSequenceNumber OPTIONAL,
	servedMSISDN				[14] MSISDN OPTIONAL,
	bearerServiceDescription	[15] Media-Components-List OPTIONAL,
	mbmsInformation				[16] MBMSInformation OPTIONAL,
	serviceContextID			[17] ServiceContextID OPTIONAL
}

CONTENTBMSCRecord	::= SET
{
	recordType					[0] RecordType,
	contentProviderId			[1] GraphicString,
	listofDownstreamNodes		[2] SEQUENCE OF GSNAddress,
	accessPointNameNI			[3] AccessPointNameNI OPTIONAL,
	servedPDPAddress			[4] PDPAddress OPTIONAL,
	listOfTrafficVolumes		[5] SEQUENCE OF ChangeOfMBMSCondition OPTIONAL,
	recordOpeningTime			[6] TimeStamp,
	duration					[7] CallDuration,
	causeForRecClosing			[8] MBMSCauseForRecClosing,
	diagnostics					[9] Diagnostics OPTIONAL,
	recordSequenceNumber		[10] INTEGER OPTIONAL,
	nodeID						[11] NodeID OPTIONAL,
	recordExtensions			[12] ManagementExtensions OPTIONAL,
	localSequenceNumber			[13] LocalSequenceNumber OPTIONAL,
	recipientAddressList		[14] SEQUENCE OF MSISDN,
	bearerServiceDescription	[15] Media-Components-List OPTIONAL,
	mbmsInformation				[16] MBMSInformation OPTIONAL,
	serviceContextID			[17] ServiceContextID OPTIONAL,
	servedpdpPDNType			[18] PDPType OPTIONAL
}

--
--  MBMS DATA TYPES
--

MBMSCauseForRecClosing	::= INTEGER
--
-- cause codes 0 to 15 are defined as used in 'CauseForTerm' 
-- (cause for termination) and 16 to 20 are as defined for 'CauseForRecClosing'
-- (cause for record closing)
--
{
	normalRelease					(0),
	abnormalRelease					(4),
	volumeLimit						(16),
	timeLimit						(17),
	maxChangeCond					(19),
	managementIntervention			(20),
	listofDownstreamNodeChange		(59)
}

.#END

5.2.4.5	MMTel CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.275 [35].
.$MMTelChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) mMTelChargingDataTypes (9) asn1Module (0) version2 (1)}

DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS	

InvolvedParty,
LocalSequenceNumber,
ManagementExtensions,
NodeAddress,
RecordType,
ServiceContextID,
Session-Id,
SubscriberEquipmentNumber,
SubscriptionID, 
ThreeGPPPSDataOffStatus,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

AoCInformation,
CarrierSelectRouting,
CauseForRecordClosing,
Early-Media-Components-List,
FEIdentifierList,
IMS-Charging-Identifier,
IMSCommunicationServiceIdentifier,
Incomplete-CDR-Indication,
InterOperatorIdentifierList,
ListOfInvolvedParties,
ListOfReasonHeader,
Media-Components-List,
MessageBody,
Milliseconds,
NumberPortabilityRouting,
RealTimeTariffInformation,
ReasonHeaderInformation,
Role-of-Node,
Service-Id,
SessionPriority, 
SIP-Method,
TransitIOILists
FROM IMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) imsChargingDataTypes (4) asn1Module (0) version2 (1)}

;

--
--  MMTel RECORDS
--

MMTelServiceRecord	::= CHOICE 
--
-- Record values 83 are MMTel specific
-- 
{
	mMTelRecord			[83] MMTelRecord
}

MMTelRecord 	::= SET
{
	recordType							[0] RecordType,
	retransmission						[1] NULL OPTIONAL,
	sIP-Method							[2] SIP-Method OPTIONAL,
	role-of-Node						[3] Role-of-Node OPTIONAL,
	nodeAddress							[4] NodeAddress OPTIONAL,
	session-Id							[5] Session-Id OPTIONAL,
	list-Of-Calling-Party-Address		[6] ListOfInvolvedParties OPTIONAL,	
	called-Party-Address				[7] InvolvedParty OPTIONAL,
	serviceRequestTimeStamp				[9] TimeStamp OPTIONAL,
	serviceDeliveryStartTimeStamp		[10] TimeStamp OPTIONAL,
	serviceDeliveryEndTimeStamp			[11] TimeStamp OPTIONAL,
	recordOpeningTime					[12] TimeStamp OPTIONAL,
	recordClosureTime					[13] TimeStamp OPTIONAL,
	interOperatorIdentifiers			[14] InterOperatorIdentifierList OPTIONAL,
	localRecordSequenceNumber			[15] LocalSequenceNumber OPTIONAL,
	recordSequenceNumber				[16] INTEGER OPTIONAL,
	causeForRecordClosing				[17] CauseForRecordClosing OPTIONAL, 
	incomplete-CDR-Indication			[18] Incomplete-CDR-Indication OPTIONAL,
	iMS-Charging-Identifier				[19] IMS-Charging-Identifier OPTIONAL,
	list-Of-SDP-Media-Components		[21] SEQUENCE OF Media-Components-List OPTIONAL,
	gGSNaddress							[22] NodeAddress OPTIONAL,
	serviceReasonReturnCode				[23] UTF8String OPTIONAL,
	list-Of-Message-Bodies				[24] SEQUENCE OF MessageBody OPTIONAL,
	recordExtensions					[25] ManagementExtensions OPTIONAL,
	expiresInformation					[26] INTEGER OPTIONAL,
	event								[28] UTF8String OPTIONAL,
	accessNetworkInformation			[29] OCTET STRING OPTIONAL,
	serviceContextID					[30] ServiceContextID OPTIONAL,
	list-of-subscription-ID				[31] SEQUENCE OF SubscriptionID OPTIONAL, 
	list-Of-Early-SDP-Media-Components	[32] SEQUENCE OF Early-Media-Components-List OPTIONAL,
	iMSCommunicationServiceIdentifier	[33] IMSCommunicationServiceIdentifier OPTIONAL,
	numberPortabilityRouting			[34] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting				[35] CarrierSelectRouting OPTIONAL,
	sessionPriority						[36] SessionPriority OPTIONAL,
	serviceRequestTimeStampFraction		[37] Milliseconds OPTIONAL,
	serviceDeliveryStartTimeStampFraction	[38] Milliseconds OPTIONAL,
	serviceDeliveryEndTimeStampFraction		[39] Milliseconds OPTIONAL,
	online-charging-flag					[43] NULL OPTIONAL,
	realTimeTariffInformation				[44] SEQUENCE OF RealTimeTariffInformation OPTIONAL,
	transit-IOI-Lists						[53] TransitIOILists OPTIONAL,
	iMSVisitedNetworkIdentifier				[54] OCTET STRING OPTIONAL,
	listOfReasonHeader						[55] ListOfReasonHeader OPTIONAL,
	additionalAccessNetworkInformation		[56] OCTET STRING OPTIONAL,
	instanceId								[57] OCTET STRING OPTIONAL, 
	subscriberEquipmentNumber				[58] SubscriberEquipmentNumber OPTIONAL,
	cellularNetworkInformation				[64] OCTET STRING OPTIONAL,
	requested-Party-Address					[101] InvolvedParty OPTIONAL,
	list-Of-Called-Asserted-Identity		[102] ListOfInvolvedParties OPTIONAL,
	outgoingSessionId						[104] Session-Id OPTIONAL,
	mMTelInformation						[110] MMTelInformation OPTIONAL,
	threeGPPPSDataOffStatus					[112] ThreeGPPPSDataOffStatus OPTIONAL,
	fEIdentifierList                        [113] FEIdentifierList OPTIONAL
}

--
--  MMTel DATA TYPES
--

MMTelInformation			::= SET
{
	listOfSupplServices	    [0] SEQUENCE OF SupplService OPTIONAL
}

ParticipantActionType ::= ENUMERATED
{
cREATE-CONF         (0),
jOIN-CONF           (1),
iNVITED-INTO-CONF   (2),
qUIT-CONF           (3)
}

SupplService		::= SET
{
	serviceType					[0] ServiceType,
	serviceMode					[1] ServiceMode OPTIONAL,
	numberOfDiversions		 	[2] INTEGER OPTIONAL,
associated-Party-Address	[3] InvolvedParty OPTIONAL,
serviceId					[4] Service-Id OPTIONAL,
changeTime					[5] TimeStamp,
numberOfParticipants		[6] INTEGER OPTIONAL,
participantActionType		[7] ParticipantActionType OPTIONAL,
cUGInformation				[8]	OCTET STRING OPTIONAL,
aoCInformation				[9]	SEQUENCE OF AoCInformation OPTIONAL
}

ServiceType		::= INTEGER
-- 
-- Values   1024 are reserved for specific Network/Manufacturer variants
--
{
	oIPresentation		(0),
	oIRestriction		(1),
	tIPresentation		(2),
	tIRestriction		(3),
	hOLD				(4),
	cBarring			(5),
	cDIVersion			(6),
	cWaiting			(8),
	mWaitingIndic		(9),
	cONF				(10),
	fLexibleAlerting	(11),
	cCBS				(12),
	cCNR				(13),
	mCID				(14),
	cAT					(15),
	cUG					(16),
	pNM					(17),
	cRS					(18),
	aoC					(19),
	eCT					(20)
}

ServiceMode ::= INTEGER
--
-- Values   1024 are reserved for specific Network/Manufacturer variants
--
{	cFunCond			(0),
	cFbusy				(1),
	cFnoReply			(2),
	cFnotLogged			(3),
	deflection			(4),
	notReach			(5),
	iCBarring			(6),
	oCBarring			(7),
	aCRejection 		(8),
	eCTBlind			(9),
	eCTConsultative		(10),
	threePTY			(11),
	aoC-S				(12),
	aoC-D				(13),
	aoC-E				(14)
}


.#END

5.2.4.6	SMS CDRs
This subclause contains the abstract syntax definitions that are specific to the CDR types defined in TS 32.274 [34].
.$SMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5)  smsChargingDataTypes (10) asn1Module (0) version2 (1)}

DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything

IMPORTS	

DataVolume 
FROM CSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) csChargingDataTypes (1) asn1Module (0) version2 (1)}

DiameterIdentity,
LocalSequenceNumber,
ManagementExtensions,
MessageClass,
MessageReference,
MSISDN, 
MSTimeZone,
NodeAddress,
PDPAddress,
PLMN-Id,
PriorityType,
RATType,
RecordType,
Session-Id,
SMSResult,
SubscriberEquipmentNumber,
SubscriptionID,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

AddressString,
IMEI,
IMSI,
ISDN-AddressString
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18)  version18 (18) }
-- from TS 29.002 [214]


CarrierSelectRouting,
NumberPortabilityRouting
FROM IMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) imsChargingDataTypes (4) asn1Module (0) version2 (1)}
 

;


--
--  SMS RECORDS
--

SMSRecordType	::= CHOICE
--
-- Record values 93,94, 110 to 113 are SMS specific.
-- 
{
	sCSMORecord				 [93] SCSMORecord, 
	sCSMTRecord				 [94] SCSMTRecord,
	sCDVTT4Record			[110] SCDVTT4Record,
	sCSMOT4Record			[111] SCSMTRecord,
	iSMSMORecord			[112] ISMSMORecord,  
	iSMSMTRecord			[113] ISMSMTRecord    
}

SCSMORecord	::= SET
{
	recordType					[0] RecordType,
	sMSNodeAddress				[1] AddressString,
	originatorInfo				[2] OriginatorInfo OPTIONAL,
	recipientInfo				[3] SEQUENCE OF RecipientInfo OPTIONAL,
	servedIMEI					[4] IMEI OPTIONAL,
	eventtimestamp				[5]	TimeStamp,
	messageReference			[6] MessageReference,
	sMTotalNumber 				[7] INTEGER OPTIONAL,
	sMSequenceNumber 			[8] INTEGER OPTIONAL,
	messageSize					[9] DataVolume OPTIONAL,
	messageClass				[10] MessageClass OPTIONAL,
	sMdeliveryReportRequested	[11] BOOLEAN OPTIONAL,
	sMDataCodingScheme			[12] INTEGER OPTIONAL,
	sMMessageType				[13] SMMessageType OPTIONAL,
	sMReplyPathRequested		[14] NULL OPTIONAL,
	sMUserDataHeader			[15] OCTET STRING OPTIONAL,
	userLocationInfo			[16] OCTET STRING OPTIONAL,
	rATType						[17] RATType OPTIONAL,
	uETimeZone					[18] MSTimeZone OPTIONAL,
	sMSResult					[19] SMSResult OPTIONAL,
	localSequenceNumber			[22] LocalSequenceNumber OPTIONAL,
	recordExtensions			[23] ManagementExtensions OPTIONAL
}

SCSMOT4Record	::= SET
{
	recordType					[0] RecordType,
	sMSNodeAddress				[1] AddressString,
	originatorInfo				[2] OriginatorInfo OPTIONAL,
	recipientInfo				[3] RecipientInfo OPTIONAL,
	servedIMEI					[4] IMEI OPTIONAL,
	eventtimestamp				[5]	TimeStamp,
	messageReference			[6] MessageReference,
	messageSize					[9] DataVolume OPTIONAL,
	messageClass				[10] MessageClass OPTIONAL,
	sMdeliveryReportRequested	[11] BOOLEAN OPTIONAL,
	sMDataCodingScheme			[12] INTEGER OPTIONAL,
	sMMessageType				[13] SMMessageType OPTIONAL,
	sMReplyPathRequested		[14] NULL OPTIONAL,
	sMUserDataHeader			[15] OCTET STRING OPTIONAL,
	userLocationInfo			[16] OCTET STRING OPTIONAL,
	rATType						[17] RATType OPTIONAL,
	uETimeZone					[18] MSTimeZone OPTIONAL,
	sMSResult					[19] SMSResult OPTIONAL,
	mTCIWFAddress				[20] NodeAddress OPTIONAL,
	sMSApplicationPortID		[21] INTEGER OPTIONAL,
	externalIdentifier			[22] SubscriptionID OPTIONAL,
	localSequenceNumber			[23] LocalSequenceNumber OPTIONAL,
	recordExtensions			[24] ManagementExtensions OPTIONAL
}


SCSMTRecord	::= SET
{
	recordType					[0] RecordType,
	sMSNodeAddress				[1] AddressString,
	recipientInfo				[2] RecipientInfo OPTIONAL,
	originatorInfo				[3] OriginatorInfo OPTIONAL,
	servedIMEI					[4] IMEI OPTIONAL,
	submissionTime				[5]	TimeStamp OPTIONAL,
	eventtimestamp				[6]	TimeStamp,
	sMPriority					[7]	PriorityType OPTIONAL,
	messageReference			[8] MessageReference OPTIONAL,
	sMTotalNumber 				[9] INTEGER OPTIONAL,
	sMSequenceNumber			[10] INTEGER OPTIONAL,
	messageSize					[11] DataVolume OPTIONAL,
	messageClass				[12] MessageClass OPTIONAL,
	sMdeliveryReportRequested	[13] BOOLEAN OPTIONAL,
	sMDataCodingScheme			[14] INTEGER OPTIONAL,
	sMMessageType				[15] SMMessageType OPTIONAL,
	sMReplyPathRequested		[16] NULL OPTIONAL,
	sMUserDataHeader			[17] OCTET STRING OPTIONAL,
	sMSStatus					[18] SMSStatus OPTIONAL,
	sMDischargeTime				[19] TimeStamp OPTIONAL,
	userLocationInfo			[20] OCTET STRING OPTIONAL,
	rATType						[21] RATType OPTIONAL,
	uETimeZone					[22] MSTimeZone OPTIONAL,
	sMSResult					[23] SMSResult OPTIONAL,
	sMDeviceTriggerInformation	[25] SMDeviceTriggerInformation OPTIONAL,
	localSequenceNumber			[26] LocalSequenceNumber OPTIONAL,
	recordExtensions			[27] ManagementExtensions OPTIONAL
}

SCDVTT4Record	::= SET
{
	recordType					[0] RecordType,
	sMSNodeAddress				[1] AddressString,
	eventtimestamp				[2]	TimeStamp,
	originatorInfo				[3] OriginatorInfo OPTIONAL,
	recipientInfo				[4] RecipientInfo OPTIONAL,
	sMDeviceTriggerIndicator	[5] SMDeviceTriggerIndicator OPTIONAL,
	sMDeviceTriggerInformation	[6] SMDeviceTriggerInformation OPTIONAL,
	sMSResult					[7] SMSResult OPTIONAL,
	localSequenceNumber			[9] LocalSequenceNumber OPTIONAL,
	recordExtensions			[10] ManagementExtensions OPTIONAL
}

ISMSMORecord	::= SET
{
	recordType					[0] RecordType,
	sMSNodeAddress				[1] NodeAddress,
	originatorInfo				[2] OriginatorInfo OPTIONAL,
	recipientInfo				[3] SEQUENCE OF RecipientInfo OPTIONAL,
	subscriberEquipmentNumber	[4] SubscriberEquipmentNumber OPTIONAL,
	eventtimestamp				[5]	TimeStamp,
	messageReference			[6] MessageReference,
	sMTotalNumber 				[7] INTEGER OPTIONAL,
	sMSequenceNumber 			[8] INTEGER OPTIONAL,
	messageSize					[9] DataVolume OPTIONAL,
	messageClass				[10] MessageClass OPTIONAL,
	sMdeliveryReportRequested	[11] BOOLEAN OPTIONAL,
	sMDataCodingScheme			[12] INTEGER OPTIONAL,
	sMMessageType				[13] SMMessageType OPTIONAL,
	sMReplyPathRequested		[14] NULL OPTIONAL,
	sMUserDataHeader			[15] OCTET STRING OPTIONAL,
	sMSResult					[16] SMSResult OPTIONAL,
	userLocationInfo			[17] OCTET STRING OPTIONAL,
	rATType						[18] RATType OPTIONAL,
	uETimeZone					[19] MSTimeZone OPTIONAL,
	pDPAddress					[20] PDPAddress OPTIONAL,
	session-Id					[21] Session-Id OPTIONAL,
	numberPortabilityRouting	[22] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting		[23] CarrierSelectRouting OPTIONAL,
	localSequenceNumber			[24] LocalSequenceNumber OPTIONAL,
	recordExtensions			[25] ManagementExtensions OPTIONAL
}


ISMSMTRecord	::= SET
{
	recordType					[0] RecordType,
	sMSNodeAddress				[1] NodeAddress,
	recipientInfo				[2] RecipientInfo OPTIONAL,
	originatorInfo				[3] OriginatorInfo OPTIONAL,
	subscriberEquipmentNumber	[4] SubscriberEquipmentNumber OPTIONAL,
	submissionTime				[5]	TimeStamp OPTIONAL,
	eventtimestamp				[6]	TimeStamp,
	sMPriority					[7]	PriorityType OPTIONAL,
	messageReference			[8] MessageReference,
	sMTotalNumber 				[9] INTEGER OPTIONAL,
	sMSequenceNumber 			[10] INTEGER OPTIONAL,
	messageSize					[11] DataVolume OPTIONAL,
	messageClass				[12] MessageClass OPTIONAL,
	sMdeliveryReportRequested	[13] BOOLEAN OPTIONAL,
	sMDataCodingScheme			[14] INTEGER OPTIONAL,
	sMMessageType				[15] SMMessageType OPTIONAL,
	sMReplyPathRequested		[16] NULL OPTIONAL,
	sMUserDataHeader			[17] OCTET STRING OPTIONAL,
	sMSStatus					[18] SMSStatus OPTIONAL,
	sMDischargeTime				[19] TimeStamp OPTIONAL,
	userLocationInfo			[20] OCTET STRING OPTIONAL,
	rATType						[21] RATType OPTIONAL,
	uETimeZone					[22] MSTimeZone OPTIONAL,
	sMSResult					[23] SMSResult OPTIONAL,
	pDPAddress					[24] PDPAddress OPTIONAL,
	session-Id					[25] Session-Id OPTIONAL,
	numberPortabilityRouting	[26] NumberPortabilityRouting OPTIONAL,
	carrierSelectRouting		[27] CarrierSelectRouting OPTIONAL,
	localSequenceNumber			[28] LocalSequenceNumber OPTIONAL,
	recordExtensions			[29] ManagementExtensions OPTIONAL
}

--
--  SMS DATA TYPES
--

OriginatorInfo	::= SEQUENCE 
--
-- OriginatorInfo is used for information about Originator of a Short Message
-- 
{
	originatorIMSI				[0] IMSI OPTIONAL,
	originatorMSISDN			[1] MSISDN OPTIONAL,
	originatorOtherAddress		[2] SMAddressInfo OPTIONAL,
									-- included for backwards compatibility
	originatorSCCPAddress		[3] AddressString OPTIONAL,
	originatorReceivedAddress	[4] SMAddressInfo OPTIONAL,
	sMOriginatorInterface		[5] SMInterface OPTIONAL,
	sMOriginatorProtocolID		[6] OCTET STRING OPTIONAL,
	originatorOtherAddresses		[7] SEQUENCE OF SMAddressInfo OPTIONAL
									-- used if type different from IMSI and MSISDN
}

RecipientInfo	::= SEQUENCE 
--
-- RecipientInfo is used for information about Recipient of a Short Message
-- 
{
	recipientIMSI				[0] IMSI OPTIONAL,
	recipientMSISDN				[1] MSISDN OPTIONAL,
	recipientOtherAddress		[2] SMAddressInfo OPTIONAL,
									-- included for backwards compatibility
	recipientSCCPAddress		[3] AddressString OPTIONAL,
	recipientReceivedAddress	[4] SMAddressInfo OPTIONAL,
	sMDestinationInterface		[5] SMInterface OPTIONAL,
	sMRecipientProtocolID		[6] OCTET STRING OPTIONAL,
	recipientOtherAddresses		[7] SEQUENCE OF SMAddressInfo OPTIONAL
									-- used if type different from IMSI and MSISDN
}

SMAddressDomain		::= SEQUENCE
{
	sMDomainName			[0] GraphicString OPTIONAL,
	threeGPPIMSI-MCC-MNC	[1] PLMN-Id OPTIONAL
}

SMAddressInfo		::= SEQUENCE
{
	sMAddressType		[0] SMAddressType OPTIONAL,
	sMAddressData		[1] GraphicString OPTIONAL,
	sMAddressDomain		[2] SMAddressDomain OPTIONAL 
}

SMAddressType	::= ENUMERATED
{
	emailAddress			(0),
	mSISDN					(1),
	iPv4Address				(2),
	iPv6Address				(3),
	numericShortCode		(4),
	alphanumericShortCode	(5),
	other					(6),
	iMSI					(7),
	nAI						(8),
	externalId				(9)
}

SMDeviceTriggerIndicator	::= ENUMERATED
{
	notDeviceTrigger		(0),
	deviceTriggerRequest	(1),
	deviceTriggerReplace	(2),
	deviceTriggerRecall		(3)
}


SMDeviceTriggerInformation	::= SEQUENCE 
--
-- SMDeviceTriggerInformation is used for information on device triggering from T4 
-- as specified in TS 29.337[231] 
-- 
{
	mTCIWFAddress			[0] NodeAddress OPTIONAL,
	sMDTReferenceNumber		[1] INTEGER OPTIONAL,
	sMServingNode			[2] SMServingNode OPTIONAL,
	sMDTValidityPeriod		[3] INTEGER OPTIONAL,
	sMDTPriorityIndication	[4] SMDTPriorityIndication OPTIONAL,
	sMSApplicationPortID	[5] INTEGER OPTIONAL
}

SMDTPriorityIndication	::= ENUMERATED
{
	nonpriority	(0),
	priority	(1)
}

SMInterface		::= SEQUENCE
{
	interfaceId			[0] GraphicString OPTIONAL,
	interfaceText		[1] GraphicString OPTIONAL,
	interfacePort		[2] GraphicString OPTIONAL,
	interfaceType		[3] SMInterfaceType OPTIONAL
}

SMInterfaceType	::= ENUMERATED
{
	unkown					(0),
	mobileOriginating		(1),
	mobileTerminating		(2),
	applicationOriginating	(3),
	applicationTerminating	(4),
	deviceTrigger			(5)
}

SMMessageType	::= ENUMERATED
{
	submission			(0),
	deliveryReport		(1),
	sMServiceRequest	(2),
	delivery			(3),
	t4DeviceTrigger		(4),
	sMDeviceTrigger		(5)
}

SMServingNode		::= SEQUENCE
{
	sGSNName			[0] DiameterIdentity OPTIONAL,
	sGSNRealm			[1] DiameterIdentity OPTIONAL,
	sGSNNumber			[2] AddressString OPTIONAL,
	mMEName				[3] DiameterIdentity OPTIONAL,
	mMERealm			[4] DiameterIdentity OPTIONAL,
	mMENumberForMTSMS	[5] AddressString OPTIONAL,
	mSCNumber			[6] AddressString OPTIONAL,
	iPSMGWNumber		[7] AddressString OPTIONAL,
	iPSMGWName			[8] DiameterIdentity OPTIONAL
}

SMSStatus		::= OCTET STRING (SIZE(1))


.#END

5.2.4.7	ProSe CDRs
This subclause contains the abstract syntax definitions that are specific to the ProSe CDR types defined in TS 32.277 [36].
.$ProSeChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) proseChargingDataType (11) asn1Module (0) version2 (1)}
DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS

IPAddress,
LocalSequenceNumber,
ManagementExtensions,
NodeID,
PLMN-Id,
RecordType,
ServiceContextID,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}


IMSI
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18) version18 (18)}
-- from TS 29.002 [214]


ChargingCharacteristics,
ChChSelectionMode,
DataVolumeGPRS

FROM GPRSChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) gprsChargingDataTypes (2) asn1Module (0) version2 (1)}

;

--
-- ProSe RECORDS
--

ProSeRecordType		::= CHOICE 
--
-- Record values 100..102 are ProSe specific
-- 
{
	pFDDRecord			[100] PFDDRecord,
	pFEDRecord			[101] PFEDRecord,
	pFDCRecord			[102] PFDCRecord
}

PFDDRecord 	::= SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	serviceContextID				[2] ServiceContextID OPTIONAL,
	servedIMSI						[3] IMSI OPTIONAL, 
	proSeFunctionIPAddress			[4] IPAddress OPTIONAL,
	chargingCharacteristics			[5] ChargingCharacteristics,
	chChSelectionMode				[6] ChChSelectionMode OPTIONAL,
	recordExtensions				[7] ManagementExtensions OPTIONAL,
	proSeRequestTimestamp			[8] TimeStamp OPTIONAL,
	roleofUE						[9] ProSeUERole OPTIONAL,
	pCThreeControlProtocolCause		[10] INTEGER OPTIONAL,
	roleofProSeFunction				[11] ProSeFunctionRole OPTIONAL,
	proSeApplicationID				[12] UTF8String OPTIONAL,
	proSeEventType					[13] ProSeEventType OPTIONAL,
	nodeID							[14] NodeID OPTIONAL,	
	proseFunctionId					[15] UTF8String OPTIONAL, 
	announcingUEHPLMNIdentifier		[16] PLMN-Id OPTIONAL,
	announcingUEVPLMNIdentifier		[17] PLMN-Id OPTIONAL,
	monitoringUEHPLMNIdentifier	[18] PLMN-Id OPTIONAL,
	monitoringUEVPLMNIdentifier		[19] PLMN-Id OPTIONAL,
	monitoredPLMNIdentifier			[20] PLMN-Id OPTIONAL, 
	applicationID					[21] UTF8String OPTIONAL, 
	directDiscoveryModel			[22] UTF8String OPTIONAL, 
	validityPeriod					[23] INTEGER OPTIONAL,	
	monitoringUEIdentifier			[24] IMSI OPTIONAL,
discovererUEHPLMNIdentifier		[25] PLMN-Id OPTIONAL,
discovererUEVPLMNIdentifier		[26] PLMN-Id OPTIONAL,
discovereeUEHPLMNIdentifier		[27] PLMN-Id OPTIONAL,
discovereeUEVPLMNIdentifier		[28] PLMN-Id OPTIONAL,
announcingPLMNID				[29] PLMN-Id OPTIONAL,
pc5RadioTechnology				[30] PC5RadioTechnology OPTIONAL

}

PFEDRecord 	::= SET
{
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	serviceContextID				[2] ServiceContextID OPTIONAL,
	servedIMSI						[3] IMSI OPTIONAL,
	proSeFunctionIPAddress			[4] IPAddress OPTIONAL,	
	chargingCharacteristics			[5] ChargingCharacteristics,
	chChSelectionMode				[6] ChChSelectionMode OPTIONAL,
	recordExtensions				[7] ManagementExtensions OPTIONAL,
	proSeRequestTimestamp			[8] TimeStamp OPTIONAL,	
	roleofUE						[9] ProSeUERole OPTIONAL,
	pCThreeEPCControlProtocolCause	[10] INTEGER OPTIONAL,
	proseFunctionPLMNIdentifier		[11] PLMN-Id OPTIONAL,
	proseFunctionId					[12] UTF8String OPTIONAL,
	recordOpeningTime				[13] TimeStamp OPTIONAL,
	recordClosureTime				[14] TimeStamp OPTIONAL,	
	applicationID					[15] UTF8String OPTIONAL,
	requestorApplicationLayerUserID [16] UTF8String OPTIONAL,
	wLANLinkLayerID					[17] UTF8String OPTIONAL,
	requestorEPCProSeUserID			[18] UTF8String OPTIONAL,
	requestedApplicationLayerUserID	[19] UTF8String OPTIONAL,
	requestedPLMNIdentifier			[20] PLMN-Id OPTIONAL,
	timeWindow						[21] INTEGER OPTIONAL,
	rangeClass						[22] RangeClass OPTIONAL,
	uELocation						[23] OCTET STRING OPTIONAL,
	proximityAlertIndication		[24] ProximityAlertIndication OPTIONAL,
	proximityAlertTimestamp			[25] TimeStamp OPTIONAL,
	proximityCancellationTimestamp	[26] TimeStamp OPTIONAL,
	reasonforCancellation			[27] ReasonforCancellation OPTIONAL,
	causeForRecClosing				[28] ProSeCauseForRecClosing,
	proximityRequestRenewalInfoBlockList	[29] SEQUENCE OF ProximityRequestRenewalInfoBlock OPTIONAL
}

PFDCRecord 	::= SET
{
-- General CDR information
	recordType						[0] RecordType,
	retransmission					[1] NULL OPTIONAL,
	serviceContextID				[2] ServiceContextID OPTIONAL,
	servedIMSI						[3] IMSI OPTIONAL,
	proSeFunctionIPAddress			[4] IPAddress OPTIONAL,
	chargingCharacteristics			[5] ChargingCharacteristics,
	chChSelectionMode				[6] ChChSelectionMode OPTIONAL,
	recordExtensions				[7] ManagementExtensions OPTIONAL,
	nodeID							[8] NodeID OPTIONAL,
	proseFunctionPLMNIdentifier		[9] PLMN-Id OPTIONAL,
	proseFunctionId					[10] UTF8String OPTIONAL,
	recordOpeningTime				[11] TimeStamp OPTIONAL,
	recordClosureTime				[12] TimeStamp OPTIONAL,
-- Common ProSe information. The same data is provided in all currently open group-level CDRs
	listOfCoverageInfo				[13] SEQUENCE OF CoverageInfo OPTIONAL,
	listOfRadioParameterSet			[14] SEQUENCE OF RadioParameterSetInfo OPTIONAL,
-- Group-specific information. This data could be different in each open group-level CDR
	proSeUEID						[15] OCTET STRING OPTIONAL,
	sourceIPaddress					[16] IPAddress OPTIONAL,
	layerTwoGroupID				[17] OCTET STRING OPTIONAL,
	proSeGroupIPmulticastaddress	[18] IPAddress OPTIONAL,
	timeOfFirstTransmission			[19] TimeStamp OPTIONAL,
	timeOfFirstReception			[20] TimeStamp OPTIONAL,
	listOfTransmitters				[21] SEQUENCE OF TransmitterInfo OPTIONAL,
	listOfTransmissionData			[22] SEQUENCE OF ChangeOfProSeCondition OPTIONAL,
	listOfReceptionData				[23] SEQUENCE OF ChangeOfProSeCondition OPTIONAL,
	causeForRecClosing				[24] ProSeCauseForRecClosing,
	listOfAppSpecificData			[25] SEQUENCE OF AppSpecificData,
targetIPaddress					[26] IPAddress OPTIONAL,
	relayIPaddress					[27] IPAddress OPTIONAL,
proSeUEtoNetworkRelayUEID		[28] OCTET STRING OPTIONAL,
proSeTargetLayerTwoID			[29] OCTET STRING OPTIONAL	
			
}

--
-- ProSe DATA TYPES
--
-- 
-- A
-- 
AppSpecificData	::= OCTET STRING

-- 
-- C
-- 

ChangeOfProSeCondition			::= SEQUENCE
--
-- Used for transmitted and received data container
--
{
	changeConditionTimestamp	[0] TimeStamp OPTIONAL,
	coverageStatus					[1] CoverageStatus OPTIONAL,
	uELocation						[2] OCTET STRING OPTIONAL,
	dataVolume				[3] DataVolumeGPRS OPTIONAL,
	serviceChangeCondition			[4] ServiceChangeCondition OPTIONAL,
	localSequenceNumber				[5] LocalSequenceNumber OPTIONAL,
	usageInformationReportSequenceNumber	[6] INTEGER OPTIONAL,
	radioResourcesInd				[7] RadioResourcesIndicator OPTIONAL,
	radiofrequency					[8] RadioFrequency OPTIONAL,
	vPLMNIdentifier					[9] PLMN-Id OPTIONAL
}
CoverageInfo	::= SEQUENCE
{
	coverageStatus	[0] CoverageStatus,
	timeStamp		[1] TimeStamp OPTIONAL,
	listOfLocation	[2] SEQUENCE OF LocationInfo OPTIONAL
}

CoverageStatus				::= ENUMERATED
{
	outOfCoverage				(0),
	inCoverage					(1) 
}

-- 
-- L
-- 

LocationInfo	::= SEQUENCE
{
	uELocation		[0] OCTET STRING OPTIONAL,
	timeStamp		[1] TimeStamp OPTIONAL
}

-- 
-- P
-- 
PC5RadioTechnology			::= ENUMERATED
{
	eUTRA					(0), 
	wLAN					(1),
	bothEUTRAAndWLAN		(2)
}

ProSeCauseForRecClosing		::= ENUMERATED
{
	proximityAlerted			(0), 
	timeExpiredWithNoRrenewal	(1),
	requestorCancellation		(2),
	timeLimited					(3),
	maxNumberOfReports			(4),
	abnormalRelease				(5)
}

ProSeEventType				::= ENUMERATED
{
	openAnnouncing					(0),
	openMonitoring					(1),
	openMatchReport					(2),
	restrictedAnnouncing 			(3),
	restrictedMonitoring 			(4),
	restrictedMatchReport			(5),	
	restrictedDiscoveryRequest 		(6),
	restrictedDiscoveryReporting	(7)
}

ProSeFunctionRole			::= ENUMERATED
{
	hPLMN			(0),
	vPLMN			(1),
	localPLMN		(2)
}

ProSeUERole					::= ENUMERATED
{
	annoucingUE					(0), 
	monitoringUE				(1),
	requestorUE					(2),
	requestedUE					(3),
	discovererUE				(4),
	discovereeUE		 		(5)
}

ProximityAlertIndication	::= ENUMERATED
{
	alerted						(0), 
	noAlert						(1)
}

ProximityRequestRenewalInfoBlock			::= SEQUENCE
--
-- Used for EPC-level discovery charging
--
{
	proSeRequestTimestamp			[0] TimeStamp OPTIONAL,	
	timeWindow						[1] INTEGER OPTIONAL,
	rangeClass						[2] RangeClass OPTIONAL,
	uELocation						[3] OCTET STRING OPTIONAL
}

-- 
-- R
-- 

RadioFrequency	::= OCTET STRING
--
-- Format of the value is according to the carrierFreq-r12 ASN.1 data type described in TS
-- 36.331 [241].
--

RadioParameterSetInfo	::= SEQUENCE
--
-- Format of the params value is according to the ProsePreconfiguration-r12 ASN.1 data type
-- described in TS 36.331 [241].
--
{
	timeStamp	[0] TimeStamp OPTIONAL,
	params		[1] OCTET STRING
}

RadioResourcesIndicator	::= INTEGER
{
	operatorProvided	(1),
	configured			(2)
}

RangeClass					::= ENUMERATED
{
	reserved					(0), 
	fiftyMeter					(1),
	onehundredMeter				(2),
	twohundredMeter				(3),
	fivehundredMeter			(4),
	onethousandMeter			(5)
}

ReasonforCancellation		::= ENUMERATED
{
	proximityAlerted			(0), 
	timeExpiredWithNoRrenewal	(1),
	requestorCancellation		(2)
}

-- 
-- S
-- 

ServiceChangeCondition	::= BIT STRING
{
	pLMNchange 					(0),
	coverageStatusChange		(1),
	locationChange				(2)
}

-- 
-- T
-- 

TransmitterInfo		::= SEQUENCE
{
	sourceIPaddress	[0] IPAddress,
	proSeUEID		[1] OCTET STRING
}

.#END

5.2.4.8	Monitoring Event CDRs
This subclause contains the abstract syntax definitions that are specific to the Monitoring Event CDR types defined in TS 32.278 [38].
.$MONTEChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) mONTEChargingDataType (12) asn1Module (0) version2 (1)}
DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS

DiameterIdentity,
LocalSequenceNumber,
ManagementExtensions,
NodeID,
RecordType,
ServiceContextID,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}


IMSI
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18) version18 (18)}
-- from TS 29.002 [214]


UserCSGInformation
FROM GPRSChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) gprsChargingDataTypes (2) asn1Module (0) version2 (1)}

;

--
-- Monitoring Event RECORDS
--

MERecordType		::= CHOICE 
--
-- Record values 103..104 are Monitoring Event specific
-- 
{
	mECORecord			[103] MECORecord,
	mERERecord			[104] MERERecord
}

MECORecord	::= SET
{
	recordType								[0] RecordType,
	retransmission							[1] NULL OPTIONAL, 	
	serviceContextID						[2] ServiceContextID OPTIONAL,
	nodeID									[3] NodeID OPTIONAL,	
	recordTimeStamp							[4] TimeStamp OPTIONAL,
	eventTimestamp							[5] TimeStamp OPTIONAL,
	monitoringEventConfigurationActivity	[6] MonitoringEventConfigurationActivity OPTIONAL,
	sCEFReferenceID							[7] SCEFReferenceID OPTIONAL,
	sCEFID									[8] DiameterIdentity OPTIONAL,
	monitoringType							[9] MonitoringType OPTIONAL,
	maximumNumberofReports					[10] INTEGER OPTIONAL,
	monitoringDuration						[11] TimeStamp OPTIONAL,
	chargeablePartyIdentifier				[12] UTF8String OPTIONAL,
	monitoredUser							[13] IMSI OPTIONAL,
	maximumDetectionTime					[14] INTEGER OPTIONAL,
	localRecordSequenceNumber				[15] LocalSequenceNumber OPTIONAL,
	reachabilityConfiguration				[16]	ReachabilityConfiguration OPTIONAL,
	locationType							[17] LocationType OPTIONAL,
	accuracy								[18] Accuracy OPTIONAL,
	listofLocations							[19] SEQUENCE OF EPSLocationInfo OPTIONAL,
	monitoringEventConfigStatus				[20] MonitoringEventConfigStatus OPTIONAL,
	recordExtensions						[21] ManagementExtensions OPTIONAL
}

MERERecord	::= SET
{
	recordType								[0] RecordType,
	retransmission							[1] NULL OPTIONAL, 	
	serviceContextID						[2] ServiceContextID OPTIONAL,
	nodeID									[3] NodeID OPTIONAL,	
	recordTimeStamp							[4] TimeStamp OPTIONAL,
	localRecordSequenceNumber				[5] LocalSequenceNumber OPTIONAL,
	listofMonitoringEventReportData			[6] SEQUENCE OF MonitoringEventReportData OPTIONAL,	recordExtensions						[7] ManagementExtensions OPTIONAL
}

--
-- Monitoring Event DATA TYPES
--
-- 
-- A
-- 

Accuracy			::= ENUMERATED
--
-- Note: value "3" is not used in this specification: it is provided to reflect 
-- the full list specified in TS 29.336 Accuracy AVP
--

{
	cGIECGI				(0),
	eNB					(1),
	lATARA				(2),
	pRA					(3)
}
CauseType		::= ENUMERATED
{
	radioNetworkLayer		(0),
	transportLayer			(1),
	nAS						(2),
	protocol					(3),
	miscellaneous			(4)
}

-- 
-- C
-- 

CommunicationFailureInfo		::= SEQUENCE
{
	causeType	[0] CauseType OPTIONAL,
	s1APCause	[1] INTEGER OPTIONAL,
	rANAPCause	[2] INTEGER OPTIONAL,
	bSSGPCause	[3] INTEGER OPTIONAL,
	gMMCause		[4] INTEGER OPTIONAL,
	sMCause		[5] INTEGER OPTIONAL
}
CurrentLocationRetrieved		::= ENUMERATED
{
	activeLocationRetrieval		(0)
}

-- 
-- E
-- 

EPSLocationInfo		::= SEQUENCE
--
-- Only one element is present. 
--
{
	mMELocationInformation	[0] MMELocationInformation OPTIONAL,
	sGSNLocationInformation	[1] SGSNLocationInformation OPTIONAL
}

-- 
-- L
-- 

LocationType				::= ENUMERATED
{
	currentLocation				(0),
	lastKnownLocation			(1) 
}

-- 
-- M
-- 

MMELocationInformation		::= SEQUENCE
{
	eUTRANCellGlobalIdentity		[0] OCTET STRING OPTIONAL,
	trackingAreaIdentity			[1] OCTET STRING OPTIONAL,
	geographicalInformation		[2] OCTET STRING OPTIONAL,
	geodeticInformation			[3] OCTET STRING OPTIONAL,
	currentLocationRetrieved		[4] CurrentLocationRetrieved OPTIONAL,
	ageOfLocationInformation		[5] INTEGER OPTIONAL,
	userCSGInformation			[6] UserCSGInformation OPTIONAL,
	eNodeBID						[7] OCTET STRING OPTIONAL
}

MonitoringEventConfigStatus		::= SEQUENCE
{
	serviceResult	[0] ServiceResult OPTIONAL,
	sCEFReferenceID	[1] SCEFReferenceID OPTIONAL,
	sCEFID			[2] DiameterIdentity OPTIONAL
}

MonitoringEventConfigurationActivity				::= ENUMERATED
{
	create				(0),
	transfer			(1),
	update				(2),
	delete				(3)
}

MonitoringEventReportData		::= SEQUENCE
{
	eventTimestamp							[0] TimeStamp OPTIONAL,
	sCEFReferenceID							[1] SCEFReferenceID OPTIONAL,
	sCEFID									[2] DiameterIdentity OPTIONAL,
	monitoringEventReportNumber				[3] INTEGER OPTIONAL,
	chargeablePartyIdentifier				[4] UTF8String OPTIONAL,
	monitoredUser							[5] IMSI OPTIONAL,
	monitoringType							[6] MonitoringType OPTIONAL,
	reachabilityInformation					[7] ReachabilityType OPTIONAL,
	reportedLocation							[8] EPSLocationInfo OPTIONAL,
	communicationFailureInformation 			[9] SEQUENCE OF CommunicationFailureInfo OPTIONAL,
	listOfNumberOfUEPerLocationReport		[10] SEQUENCE OF NumberOfUEPerLocationReport OPTIONAL
}

MonitoringType				::= ENUMERATED
--
-- Note: value "3" and "4" are not used in this specification: they are provided to reflect the full
-- list specified in TS 29.336 Monitoring-Type AVP.
--
{
	lossOfConnectivity						(0),
	ueReachability							(1),
	locationReporting						(2),
	changeOfIMSIIMEISVAssociation			(3),
	roamingStatus							(4),
	communicationFailure					(5),
	availabilityAfterDDNFailure				(6),
	numberOfUEPerLocation					(7)
}

-- 
-- N
-- 

NumberOfUEPerLocationReport		::= SEQUENCE
{
	ePSLocationInformation	[0] EPSLocationInfo OPTIONAL,
	uECount					[1] INTEGER OPTIONAL
}

-- 
-- R
-- 

ReachabilityConfiguration		::= SEQUENCE
{
	reachabilityType			[0] ReachabilityType OPTIONAL,
	maximumLatency				[1] INTEGER OPTIONAL,
	maximumResponseTime			[2] INTEGER OPTIONAL
}

ReachabilityType			::= ENUMERATED
{
	reachabilityforSMS				(0),
	reachabilityforData				(1) 
}

-- 
-- S
-- 

SGSNLocationInformation		::= SEQUENCE
{
	cellGlobalIdentity			[0] OCTET STRING OPTIONAL,
	locationAreaIdentity			[1] OCTET STRING OPTIONAL,
	serviceAreaIdentity			[2] OCTET STRING OPTIONAL,
	routingAreaIdentity			[3] OCTET STRING OPTIONAL,
	geographicalInformation		[4] OCTET STRING OPTIONAL,
	geodeticInformation			[5] OCTET STRING OPTIONAL,
	currentLocationRetrieved		[6] CurrentLocationRetrieved OPTIONAL,
	ageOfLocationInformation		[7] INTEGER OPTIONAL,
	userCSGInformation			[8] UserCSGInformation OPTIONAL
}
SCEFReferenceID	::= INTEGER (0..4294967295)
--
-- 0..4294967295 is equivalent to 0..2**32-1
--

ServiceResult		::= SEQUENCE
{
	vendorId			[0] INTEGER OPTIONAL,
	serviceResultCode	[1] INTEGER OPTIONAL
}

.#END

5.2.5	Charging Function domain CDRs
5.2.5.1	General
This subclause contains the syntax definitions of the CDRs for the CHF.
5.2.5.2	CHF CDRs
This subclause contains the abstract syntax definitions that are specific to the CHF CDR types defined in this document.
.$CHFChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) chfChargingDataTypes (15) asn1Module (0) version1 (0)}
DEFINITIONS IMPLICIT TAGS	::=

BEGIN

-- EXPORTS everything 

IMPORTS	

CallDuration,
CauseForRecClosing,
ChargingID,
DataVolumeOctets,
Diagnostics,
EnhancedDiagnostics,
DynamicAddressFlag,
InvolvedParty,
IPAddress,
LocalSequenceNumber,
ManagementExtensions,
MessageClass,
MessageReference,
MSTimeZone,
NodeAddress,
PLMN-Id,
PriorityType,
RANNASCause,
RecordType,
ServiceSpecificInfo,
SubscriberEquipmentNumber,
SubscriptionID,
ThreeGPPPSDataOffStatus,
TimeStamp
FROM GenericChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5) genericChargingDataTypes (0) asn1Module (0) version2 (1)}

AddressString
FROM MAP-CommonDataTypes {itu-t identified-organization (4) etsi (0) mobileDomain (0) gsm-Network (1) modules (3) map-CommonDataTypes (18)  version18 (18) }

ChargingCharacteristics,
ChargingRuleBaseName,
ChChSelectionMode,
EventBasedChargingInformation,
PresenceReportingAreaInfo,
RatingGroupId,
ServiceIdentifier
FROM GPRSChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) gprsChargingDataTypes (2) asn1Module (0) version2 (1)}

OriginatorInfo,
RecipientInfo,
SMMessageType,
SMSResult,
SMSStatus
FROM SMSChargingDataTypes {itu-t (0) identified-organization (4) etsi(0) mobileDomain (0) charging (5)  smsChargingDataTypes (10) asn1Module (0) version2 (1)}

APIDirection
FROM ExposureFunctionAPIChargingDataTypes {itu-t (0) identified-organization (4) etsi (0) mobileDomain (0) charging (5) exposureFunctionAPIChargingDataTypes (14) asn1Module (0) version2 (1)}


;

--
--  CHF RECORDS
--

CHFRecord	::= CHOICE 
--
-- Record values 200..201 are specific
--
{
	chargingFunctionRecord			[200] ChargingRecord
}

ChargingRecord 	::= SET
{
	recordType								[0] RecordType,
	recordingNetworkFunctionID				[1] NetworkFunctionName,
	subscriberIdentifier						[2] SubscriptionID OPTIONAL,
	nFunctionConsumerInformation				[3] NetworkFunctionInformation,
	triggers									[4] SEQUENCE OF Trigger OPTIONAL,
	listOfMultipleUnitUsage					[5] SEQUENCE OF MultipleUnitUsage OPTIONAL,
	recordOpeningTime						[6] TimeStamp,
	duration									[7] CallDuration,
	recordSequenceNumber						[8] INTEGER OPTIONAL,
	causeForRecClosing						[9] CauseForRecClosing,
	diagnostics								[10] Diagnostics OPTIONAL,
	localRecordSequenceNumber				[11] LocalSequenceNumber OPTIONAL,
	recordExtensions							[12] ManagementExtensions OPTIONAL,
	pDUSessionChargingInformation			[13] PDUSessionChargingInformation OPTIONAL,
	roamingQBCInformation					[14] RoamingQBCInformation OPTIONAL,
	sMSChargingInformation					[15] SMSChargingInformation OPTIONAL,
	chargingSessionIdentifier				[16] ChargingSessionIdentifier OPTIONAL,
	serviceSpecificationInformation			[17] OCTET STRING OPTIONAL,
	exposureFunctionAPIInformation			[18] ExposureFunctionAPIInformation OPTIONAL,
	registrationChargingInformation			[19] RegistrationChargingInformation OPTIONAL,
	n2ConnectionChargingInformation			[20] N2ConnectionChargingInformation OPTIONAL,
	locationReportingChargingInformation	[21] LocationReportingChargingInformation OPTIONAL,
	incompleteCDRIndication					[22] IncompleteCDRIndication OPTIONAL,
	tenantIdentifier							[23] TenantIdentifier OPTIONAL,
	mnSConsumerIdentifier					[24] MnSConsumerIdentifier OPTIONAL,
	nSMChargingInformation					[25] NSMChargingInformation OPTIONAL,
	nSPAChargingInformation					[26] NSPAChargingInformation OPTIONAL,
	chargingID								[27] ChargingID OPTIONAL

}

--
-- PDU Session Charging Information
--

PDUSessionChargingInformation 	::= SET
{
	pDUSessionChargingID				[0] ChargingID,
	userIdentifier					[1] InvolvedParty OPTIONAL,
	userEquipmentInfo				[2] SubscriberEquipmentNumber OPTIONAL,
	userLocationInformation			[3] UserLocationInformation OPTIONAL,
	userRoamerInOut					[4] RoamerInOut OPTIONAL,
	presenceReportingAreaInfo		[5]	PresenceReportingAreaInfo OPTIONAL,
	pDUSessionId						[6] PDUSessionId,
	networkSliceInstanceID			[7] SingleNSSAI OPTIONAL,
	pDUType							[8] PDUSessionType OPTIONAL,
	sSCMode							[9] SSCMode OPTIONAL,
	sUPIPLMNIdentifier				[10] PLMN-Id OPTIONAL,
	servingNetworkFunctionID			[11] SEQUENCE OF ServingNetworkFunctionID OPTIONAL,
	rATType							[12] RATType OPTIONAL,
	dataNetworkNameIdentifier		[13] DataNetworkNameIdentifier OPTIONAL,
	pDUAddress						[14] PDUAddress OPTIONAL,
	authorizedQoSInformation			[15] AuthorizedQoSInformation OPTIONAL,
	uETimeZone 						[16] MSTimeZone OPTIONAL,
	pDUSessionstartTime				[17] TimeStamp OPTIONAL,
	pDUSessionstopTime				[18] TimeStamp OPTIONAL,
	diagnostics						[19] Diagnostics OPTIONAL,
	chargingCharacteristics			[20] ChargingCharacteristics OPTIONAL,
	chChSelectionMode				[21] ChChSelectionMode OPTIONAL,
	threeGPPPSDataOffStatus			[22] ThreeGPPPSDataOffStatus OPTIONAL,
	rANSecondaryRATUsageReport 		[23] SEQUENCE OF NGRANSecondaryRATUsageReport OPTIONAL,
	subscribedQoSInformation 		[24] SubscribedQoSInformation OPTIONAL,
	authorizedSessionAMBR 			[25] SessionAMBR OPTIONAL,
	subscribedSessionAMBR 			[26] SessionAMBR OPTIONAL,
	servingCNPLMNID					[27] PLMN-Id OPTIONAL,
	sUPIunauthenticatedFlag 			[28] NULL OPTIONAL,
	dnnSelectionMode					[29] DNNSelectionMode OPTIONAL,
	homeProvidedChargingID			[30] ChargingID OPTIONAL,
	mAPDUNonThreeGPPUserLocationInfo[31] UserLocationInformation OPTIONAL,
	mAPDUNonThreeGPPRATType			[32] RATType OPTIONAL,
	mAPDUSessionInformation			[33] MAPDUSessionInformation OPTIONAL,
	enhancedDiagnostics				[34] EnhancedDiagnostics5G OPTIONAL,
	userLocationInformationASN1		[35] UserLocationInformationStructured OPTIONAL,
	mAPDUNonThreeGPPUserLocationInfoASN1 [36] UserLocationInformationStructured OPTIONAL,
	userLocationTime					[37] TimeStamp OPTIONAL,
	mAPDUNonThreeGPPUserLocationTime	[38] TimeStamp OPTIONAL,
	listOfPresenceReportingAreaInformation	[39] SEQUENCE OF PresenceReportingAreaInfo OPTIONAL
-- 
}

--
-- Roaming QBC Information

--

RoamingQBCInformation 	::= SET
{
	multipleQFIcontainer			[0] SEQUENCE OF MultipleQFIContainer OPTIONAL,
	uPFID							[1] NetworkFunctionName OPTIONAL,
	roamingChargingProfile			[2] RoamingChargingProfile OPTIONAL
}


--
-- SMS Charging Information
--

SMSChargingInformation	::= SET
{
	originatorInfo				[1] OriginatorInfo OPTIONAL,
	recipientInfos				[2] SEQUENCE OF RecipientInfo OPTIONAL,
	userEquipmentInfo			[3] SubscriberEquipmentNumber OPTIONAL,
	userLocationInformation		[4] UserLocationInformation OPTIONAL,
	uETimeZone 					[5] MSTimeZone OPTIONAL,
	rATType						[6] RATType OPTIONAL,
	sMSCAddress					[7] AddressString OPTIONAL,
	eventtimestamp				[8] TimeStamp,
-- 9 to 19 is for future use
	sMDataCodingScheme			[20] INTEGER OPTIONAL,
	sMMessageType				[21] SMMessageType OPTIONAL,
	sMReplyPathRequested			[22] SMReplyPathRequested OPTIONAL,
	sMUserDataHeader				[23] OCTET STRING OPTIONAL,
	sMSStatus					[24] SMSStatus OPTIONAL,
	sMDischargeTime				[25] TimeStamp OPTIONAL,
	sMTotalNumber 				[26] INTEGER OPTIONAL,
	sMServiceType				[27] SMServiceType OPTIONAL,
	sMSequenceNumber 			[28] INTEGER OPTIONAL,
	sMSResult					[29] SMSResult OPTIONAL,
	submissionTime				[30] TimeStamp OPTIONAL,
	sMPriority					[31] PriorityType OPTIONAL,
	messageReference				[32] MessageReference OPTIONAL,
	messageSize					[33] INTEGER OPTIONAL,
	messageClass					[34] MessageClass OPTIONAL,
	sMdeliveryReportRequested	[35] SMdeliveryReportRequested OPTIONAL,
	messageClassTokenText		[36] UTF8String OPTIONAL,
	userRoamerInOut				[37] RoamerInOut OPTIONAL,
	userLocationInformationASN1	[38] UserLocationInformationStructured OPTIONAL

}


--
-- Exposure Function API Information corresponds to NEF API Charging information
--

ExposureFunctionAPIInformation	::= SET
{
	groupIdentifier					[0] UTF8String OPTIONAL,
-- This UTF8String is based on the string specified in TS 29.571 [249]
-- The string may also be based on AddressString.	aPIDirection					[1] APIDirection OPTIONAL,
	aPITargetNetworkFunction		[2] NetworkFunctionInformation OPTIONAL,
	aPIResultCode					[3] APIResultCode OPTIONAL,
	aPIName							[4] IA5String,
	aPIReference					[5] IA5String OPTIONAL,
	aPIContent						[6] OCTET STRING OPTIONAL,
	externalIndividualIdentifier	[7] InvolvedParty OPTIONAL,
	externalGroupIdentifier			[8] ExternalGroupIdentifier OPTIONAL

}


--
-- Registration Charging Information
--

RegistrationChargingInformation 	::= SET
{
	registrationMessagetype				[0] RegistrationMessageType,
	userIdentifier						[1] InvolvedParty OPTIONAL,
	userEquipmentInfo					[2] SubscriberEquipmentNumber OPTIONAL,
	sUPIunauthenticatedFlag 				[3] NULL OPTIONAL,
	userRoamerInOut						[4] RoamerInOut OPTIONAL,
	userLocationInformation				[5] UserLocationInformation OPTIONAL,
	userLocationInfoTime					[6] TimeStamp OPTIONAL, -- This field is not used
-- user location info time is included under UserLocationInformation
	uETimeZone 							[7] MSTimeZone OPTIONAL,
	rATType								[8] RATType OPTIONAL,
	mICOModeIndication					[9] MICOModeIndication OPTIONAL,
	smsIndication						[10] SmsIndication OPTIONAL,
	taiList								[11] SEQUENCE OF TAI OPTIONAL,
	serviceAreaRestriction				[12] ServiceAreaRestriction OPTIONAL,
	requestedNSSAI						[13] SEQUENCE OF SingleNSSAI OPTIONAL,
	allowedNSSAI							[14] SEQUENCE OF SingleNSSAI OPTIONAL,
	rejectedNSSAI						[15] SEQUENCE OF SingleNSSAI OPTIONAL,
	pSCellInformation					[16] PSCellInformation OPTIONAL,
	fiveGMMCapability					[17] FiveGMMCapability OPTIONAL,
	nSSAIMapList							[18] SEQUENCE OF NSSAIMap OPTIONAL,
	amfUeNgapId							[19] AmfUeNgapId OPTIONAL, 
	ranUeNgapId							[20] RanUeNgapId OPTIONAL, 
	ranNodeId							[21] GlobalRanNodeId OPTIONAL,
	userLocationInformationASN1			[22] UserLocationInformationStructured OPTIONAL


}

--
-- N2 connection charging Information 
--

N2ConnectionChargingInformation 	::= SET
{
	n2ConnectionMessageType				[0] N2ConnectionMessageType,
	userIdentifier						[1] InvolvedParty OPTIONAL,
	userEquipmentInfo					[2] SubscriberEquipmentNumber OPTIONAL,
	sUPIunauthenticatedFlag 				[3] NULL OPTIONAL,
	userRoamerInOut						[4] RoamerInOut OPTIONAL,
	userLocationInformation				[5] UserLocationInformation OPTIONAL,
	userLocationInfoTime					[6] TimeStamp OPTIONAL, -- This field is not used
-- user location info time is included under UserLocationInformation
	uETimeZone 							[7] MSTimeZone OPTIONAL,
	rATType								[8] RATType OPTIONAL,
	ranUeNgapId							[9] RanUeNgapId OPTIONAL, 
	ranNodeId							[10] GlobalRanNodeId OPTIONAL,
	restrictedRatList					[11] SEQUENCE OF RATType OPTIONAL,
	forbiddenAreaList					[12] SEQUENCE OF Area OPTIONAL,
	serviceAreaRestriction				[13] ServiceAreaRestriction OPTIONAL,
	restrictedCnList						[14] SEQUENCE OF CoreNetworkType OPTIONAL,
	allowedNSSAI							[15] SEQUENCE OF SingleNSSAI OPTIONAL,
	rrcEstablishmentCause				[16] RrcEstablishmentCause OPTIONAL,
	pSCellInformation					[17] PSCellInformation OPTIONAL,
	amfUeNgapId							[18] AmfUeNgapId OPTIONAL,
	userLocationInformationASN1			[19] UserLocationInformationStructured OPTIONAL


}


--
-- Location reporting charging Information
--


LocationReportingChargingInformation 	::= SET
{
	locationReportingMessagetype			[0] LocationReportingMessageType,
	userIdentifier						[1] InvolvedParty OPTIONAL,
	userEquipmentInfo					[2] SubscriberEquipmentNumber OPTIONAL,
	sUPIunauthenticatedFlag 				[3] NULL OPTIONAL,
	userRoamerInOut						[4] RoamerInOut OPTIONAL,
	userLocationInformation				[5] UserLocationInformation OPTIONAL,
	userLocationInfoTime					[6] TimeStamp OPTIONAL, -- This field is not used
-- user location info time is included under UserLocationInformation
	uETimeZone 							[7] MSTimeZone OPTIONAL,
	presenceReportingAreaInfo			[8]	PresenceReportingAreaInfo OPTIONAL,
	rATType								[9] RATType OPTIONAL,
	pSCellInformation					[10] PSCellInformation OPTIONAL,
	userLocationInformationASN1			[11] UserLocationInformationStructured OPTIONAL,
	listOfPresenceReportingAreaInformation	[39] SEQUENCE OF PresenceReportingAreaInfo OPTIONAL


}


--
-- Network Slice Performance and Analytics charging Information
--

NSPAChargingInformation			::= SET
{
	singelNSSAI					[0] SingleNSSAI
}

--
-- PDU Container Information
--

PDUContainerInformation 		::= SEQUENCE
{
	chargingRuleBaseName					[0] ChargingRuleBaseName OPTIONAL,
	-- aFCorrelationInformation [1] is replaced by afChargingIdentifier [14]
	timeOfFirstUsage						[2] TimeStamp OPTIONAL,
	timeOfLastUsage							[3] TimeStamp OPTIONAL,
	qoSInformation							[4] FiveGQoSInformation OPTIONAL,
	userLocationInformation					[5] UserLocationInformation OPTIONAL,
	presenceReportingAreaInfo				[6] PresenceReportingAreaInfo OPTIONAL,
	rATType									[7] RATType OPTIONAL,
	sponsorIdentity							[8] OCTET STRING OPTIONAL,
	applicationServiceProviderIdentity		[9] OCTET STRING OPTIONAL,
	servingNetworkFunctionID				[10] SEQUENCE OF ServingNetworkFunctionID OPTIONAL,
	uETimeZone 								[11] MSTimeZone OPTIONAL,
	threeGPPPSDataOffStatus					[12] ThreeGPPPSDataOffStatus OPTIONAL,
	qoSCharacteristics						[13] QoSCharacteristics OPTIONAL,
	afChargingIdentifier					[14] ChargingID OPTIONAL,
	afChargingIdString						[15] AFChargingID OPTIONAL,
	mAPDUSteeringFunctionality				[16] MAPDUSteeringFunctionality OPTIONAL,
	mAPDUSteeringMode						[17] MAPDUSteeringMode OPTIONAL,
	userLocationInformationASN1				[18] UserLocationInformationStructured OPTIONAL,
	listOfPresenceReportingAreaInformation	[19] SEQUENCE OF PresenceReportingAreaInfo OPTIONAL


}

--
-- NSM charging Information
--
--
-- See TS 28.541 [254] for more information
--


NSMChargingInformation 	::= SET
{
	managementOperation						[0] ManagementOperation OPTIONAL,
	iDnetworkSliceInstance					[1] OCTET STRING OPTIONAL,
	listOfserviceProfileChargingInformation	[2] SEQUENCE OF ServiceProfileChargingInformation OPTIONAL,
	managementOperationStatus				[3]	ManagementOperationStatus OPTIONAL,
	operationalState							[4]	OperationalState OPTIONAL,
	administrativeState						[5]	AdministrativeState OPTIONAL


}



--
-- QFI Container Information
--

MultipleQFIContainer 		::= SEQUENCE
{
	qosFlowId								[0] QoSFlowId OPTIONAL,
	triggers								[1] SEQUENCE OF Trigger OPTIONAL,
	triggerTimeStamp						[2] TimeStamp OPTIONAL,
	dataTotalVolume							[3] DataVolumeOctets OPTIONAL,
	dataVolumeUplink						[4] DataVolumeOctets OPTIONAL,
	dataVolumeDownlink						[5] DataVolumeOctets OPTIONAL,
	localSequenceNumber						[6] LocalSequenceNumber OPTIONAL,
	timeOfFirstUsage						[8] TimeStamp OPTIONAL,
	timeOfLastUsage							[9] TimeStamp OPTIONAL,
	qoSInformation							[10] FiveGQoSInformation OPTIONAL,
	userLocationInformation					[11] UserLocationInformation OPTIONAL,
	uETimeZone	 							[12] MSTimeZone OPTIONAL,
	presenceReportingAreaInfo				[13] PresenceReportingAreaInfo OPTIONAL,
	rATType									[14] RATType OPTIONAL,
	reportTime								[15] TimeStamp,
	servingNetworkFunctionID				[16] SEQUENCE OF ServingNetworkFunctionID OPTIONAL,
	threeGPPPSDataOffStatus					[17] ThreeGPPPSDataOffStatus OPTIONAL,
	threeGPPChargingID						[18] ChargingID OPTIONAL,
	diagnostics						[19] Diagnostics OPTIONAL,
	extensionDiagnostics					[20] EnhancedDiagnostics OPTIONAL,
	qoSCharacteristics						[21] QoSCharacteristics OPTIONAL,
	time									[22] CallDuration OPTIONAL,
	userLocationInformationASN1				[23] UserLocationInformationStructured OPTIONAL,
	listOfPresenceReportingAreaInformation	[39] SEQUENCE OF PresenceReportingAreaInfo OPTIONAL


}

--
-- CHF CHARGING TYPES
--
-- 
-- A
-- 


AFChargingID	::= UTF8String
--
-- See 3GPP TS 29.571 [249] for details.
-- 

AgeOfLocationInformation 	::= INTEGER


AdministrativeState 	::= ENUMERATED
{
	lOCKED		 (0),
	uNLOCKED 	 (1),
	sHUTTINGDOWN (2)

}

AccessType	::= ENUMERATED
{
	threeGPPAccess					(0),
	nonThreeGPPAccess				(1)

}


AllocationRetentionPriority	::= SEQUENCE
{
	priorityLevel 			[1] INTEGER,
	preemptionCapability	[2] PreemptionCapability,
	preemptionVulnerability	[3] PreemptionVulnerability
}

AMFID	::= OCTET STRING (SIZE(3..6))
-- See subclause 2.10.1 of 3GPP TS 23.003 [7] for encoding.
-- Any byte following the 3 first shall be set to ”F”

AmfUeNgapId	::= INTEGER

APIResultCode	::= INTEGER
--
-- See specific API for more information
--
Area	::= SEQUENCE
{
	tacs 		[0] SEQUENCE OF TAC OPTIONAL,
	areaCode	[1] OCTET STRING OPTIONAL

}


ATSSSCapability	::= ENUMERATED
{
	aTSSS-LL					(0),
	mPTCP-ATSS-LL				(1),
	mPTCP-ATSS-LL-ASModeUL		(2),
	mPTCP-ATSS-LL-ExSDModeUL	(3), 
 	mPTCP-ATSS-LL-ASModeDLUL	(4) 

}


AuthorizedQoSInformation	::= SEQUENCE
--
-- See TS 32.291 [58] for more information
-- 
{
	fiveQi				[1] INTEGER OPTIONAL,
	aRP					[2] AllocationRetentionPriority OPTIONAL,
	priorityLevel 		[3] INTEGER OPTIONAL,
	averWindow			[4] INTEGER OPTIONAL,
	maxDataBurstVol		[5] INTEGER OPTIONAL
}

-- 
-- B
-- 

Bitrate	::= OCTET STRING
-- 
--  See 3GPP TS 29.571 [249] Bitrate data type.
-- 

-- 
-- C
-- 


ChargingSessionIdentifier	::= OCTET STRING
-- See 3GPP TS 32.290 [57] for details.

CoreNetworkType 		::= ENUMERATED
{
	fiveGC 		(0),
	ePC			(1)
}


-- 
-- D
-- 

DataNetworkNameIdentifier	::= IA5String (SIZE(1..63))
--
-- Network Identifier part of DNN in dot representation.
-- For example, if the complete DNN is 'apn1a.apn1b.apn1c.mnc022.mcc111.gprs'
-- The Identifier is 'apn1a.apn1b.apn1c' and is presented in this form in the CDR.
--

DelayToleranceIndicator   ::= ENUMERATED
{
	dTSupported 			(0),
	dTNotSupported			(1)
}

DNNSelectionMode	::= ENUMERATED
--
-- See Information Elements TS 29.502 [250] for more information
--
{
	uEorNetworkProvidedSubscriptionVerified				(0),
	uEProvidedSubscriptionNotVerified					(1),
	networkProvidedSubscriptionNotVerified				(2)
}

-- 
-- E
-- 

Ecgi	::= SEQUENCE
{
	plmnId					[0] PLMN-Id,
	eutraCellId			[1] EutraCellId,
	nid						[2] Nid OPTIONAL
}
-- 
-- See 3GPP TS 29.571 [249] for details
-- 

ENbId		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
--
ExternalGroupIdentifier		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
--

EutraCellId		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
-- 

EutraLocation	::= SEQUENCE
{
	tai							[0] TAI OPTIONAL,
	ecgi						[1] Ecgi OPTIONAL,
	ageOfLocationInformation		[3] AgeOfLocationInformation OPTIONAL,
	ueLocationTimestamp			[4] TimeStamp OPTIONAL,
	geographicalInformation		[5] GeographicalInformation	OPTIONAL,
	geodeticInformation			[6] GeodeticInformation OPTIONAL,
	globalNgenbId				[7] GlobalRanNodeId OPTIONAL,
	globalENbId					[8] GlobalRanNodeId OPTIONAL

}





EnhancedDiagnostics5G					::= SEQUENCE
{
	rANNASRelCause						[0] SEQUENCE OF RANNASRelCause
}



-- 
-- F
-- 

FiveGMMCapability	::= OCTET STRING
-- 
-- See 3GPP TS 29.571 [249] for details
-- 

FiveGMmCause	::= INTEGER
-- 
-- See 3GPP TS 29.571 [249] for details
-- 



FiveGQoSInformation	::= SEQUENCE
--
-- See TS 32.291 [58] for more information
-- 
{
	fiveQi					[1] INTEGER OPTIONAL,
	aRP						[2] AllocationRetentionPriority OPTIONAL,
	qoSNotificationControl	[3] BOOLEAN OPTIONAL,
	reflectiveQos			[4] BOOLEAN OPTIONAL,
	maxbitrateUL				[5] Bitrate OPTIONAL,
	maxbitrateDL				[6] Bitrate OPTIONAL,
	guaranteedbitrateUL		[7] Bitrate OPTIONAL,
	guaranteedbitrateDL		[8] Bitrate OPTIONAL,
	priorityLevel 			[9] INTEGER OPTIONAL,
	averWindow				[10] INTEGER OPTIONAL,
	maxDataBurstVol			[11] INTEGER OPTIONAL,
	maxPacketLossRateDL 		[12] INTEGER OPTIONAL,
	maxPacketLossRateUL 		[13] INTEGER OPTIONAL
}

FiveGSmCause	::= INTEGER
-- 
-- See 3GPP TS 29.571 [249] for details
-- 


-- 
-- G
-- 

GCI		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
-- 


GeodeticInformation 	::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
-- 


GeographicalInformation ::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
-- 

GLI		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
-- 


GlobalRanNodeId		::= SEQUENCE 
{
	pLMNId		[0] PLMN-Id OPTIONAL,
	n3IwfId		[1] N3IwFId OPTIONAL,
	gNbId		[2] GNbId OPTIONAL,
	ngeNbId		[3] NgeNbId OPTIONAL,
	wagfId		[4] WAgfId OPTIONAL,
	tngfId		[5] TngfId OPTIONAL,
	nid			[6] Nid OPTIONAL,
	eNbId		[7] ENbId OPTIONAL

}
 

GNbId		::= SEQUENCE
{
	bitLength	[0] INTEGER,
	gNbValue	[1] IA5String (SIZE(10))

}

-- 
-- H
-- 

HFCNodeId		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
--

-- 
-- I 
-- 

IncompleteCDRIndication	::= SEQUENCE
-- The values are TRUE if the corresponding message was lost, FALSE if it is not lost
-- and not included if the status is unknown
{
	initialLost		[0] BOOLEAN OPTIONAL,	-- Initial was lost
	updateLost		[1] BOOLEAN OPTIONAL,	-- An Update was lost, 
	terminationLost	[2] BOOLEAN OPTIONAL	-- Termination was lost
}

-- 
-- L 
-- 

LineType		::= ENUMERATED
{
	dSL 	(0),
	pON		(1)

}

LocationReportingMessageType		::= INTEGER


-- 
-- M
-- 

ManagementOperation 	::= ENUMERATED
{
	createMOI 			(0),
	modifyMOIAttributes	(1),
	deleteMOI			(2)

}

ManagementOperationStatus 	::= ENUMERATED
{
	oPERATION-SUCCEEDED	(0),
	oPERATION-FAILED	(1)

}

MnSConsumerIdentifier		::= OCTET STRING 


MAPDUSessionIndicator	::= ENUMERATED
{
	mAPDURequest 					(0),
	mAPDUNetworkUpgradeAllowed		(1)

}


MAPDUSessionInformation	::= SEQUENCE
{
	mAPDUSessionIndicator			[0] MAPDUSessionIndicator OPTIONAL,
	aTSSSCapability					[1] ATSSSCapability OPTIONAL

}



MAPDUSteeringFunctionality	::= ENUMERATED
{
	mPTCP 		(0),
	aTSSSLL		(1)

}


MAPDUSteeringMode	::= SEQUENCE
{
	steerModeValue			[0] SteerModeValue OPTIONAL,
	active					[1] AccessType OPTIONAL,
	standby					[2] AccessType OPTIONAL,
	threegLoad				[3] INTEGER OPTIONAL,
	prioAcc					[4] AccessType OPTIONAL

}


MICOModeIndication 		::= ENUMERATED
{
	mICOMode 			(0),
	noMICOMode			(1)
}

MobilityLevel	::= ENUMERATED
{
	stationary			(0),
	nomadic				(1),
	restrictedMobility	(2),
	fullyMobility		(3)

}
 

MultipleUnitUsage 		::= SEQUENCE
{
	ratingGroup							[0] RatingGroupId,
	usedUnitContainers					[1] SEQUENCE OF UsedUnitContainer OPTIONAL,
	uPFID								[2] NetworkFunctionName OPTIONAL,
	multihomedPDUAddress				[3] PDUAddress OPTIONAL
}

-- 
-- N
-- 
N2ConnectionMessageType		::= INTEGER

N3IwFId		::= IA5String (SIZE(1..16))
--
-- See 3GPP TS 29.571 [249] for details.
-- 

N3gaLocation	::= SEQUENCE
{
	n3gppTai			[0] TAI OPTIONAL,
	n3IwfId			[1] N3IwFId OPTIONAL,
	ueIpv4Addr		[2] IPAddress OPTIONAL,
	ueIpv6Addr		[3] IPAddress OPTIONAL,
	portNumber		[4] INTEGER	OPTIONAL, 
	tnapId			[5] TNAPId	OPTIONAL, 
	twapId			[6] TWAPId	OPTIONAL,
 	hfcNodeId		[7] HFCNodeId OPTIONAL,
	w5gbanLineType	[8] LineType OPTIONAL,
	gli				[9] GLI OPTIONAL,
	gci				[10] GCI OPTIONAL

}


Ncgi	::= SEQUENCE
{
	plmnId					[0] PLMN-Id,
	nrCellId			[1] NrCellId,
	nid						[2] Nid OPTIONAL
}

NrLocation	::= SEQUENCE
{
	tai							[0] TAI OPTIONAL,
	ncgi						[1] Ncgi OPTIONAL,
	ageOfLocationInformation		[2] AgeOfLocationInformation OPTIONAL,
	ueLocationTimestamp			[3] TimeStamp OPTIONAL,
	geographicalInformation		[4] GeographicalInformation	OPTIONAL,
	geodeticInformation			[5] GeodeticInformation OPTIONAL,
	globalGnbId					[6] GlobalRanNodeId OPTIONAL

}


-- 
-- See 3GPP TS 29.571 [249] for details
-- 


NetworkAreaInfo	::= SEQUENCE
{
	ecgis				[0] SEQUENCE OF Ecgi OPTIONAL,
	ncgis				[1] SEQUENCE OF Ncgi OPTIONAL,
	gRanNodeIds			[2] SEQUENCE OF GlobalRanNodeId OPTIONAL,
	tais				[3] SEQUENCE OF TAI OPTIONAL
}


NetworkFunctionInformation	::= SEQUENCE
{
	networkFunctionality					[0] NetworkFunctionality,
	networkFunctionName					[1] NetworkFunctionName OPTIONAL,
	networkFunctionIPv4Address			[2] IPAddress OPTIONAL,
	networkFunctionPLMNIdentifier		[3] PLMN-Id OPTIONAL,
	networkFunctionIPv6Address			[4] IPAddress OPTIONAL,
	networkFunctionFQDN					[5] NodeAddress OPTIONAL

}

NetworkFunctionName	::= IA5String (SIZE(1..36))
-- Shall be a Universally Unique Identifier (UUID) version 4, as described in IETF RFC 4122 [410]

NetworkFunctionality	::= ENUMERATED
{
	cHF				(0),
	-- CHF  may only to be used in failure cases
	sMF				(1),
	aMF				(2),
	sMSF			(3),
sGW			(4),
-- SGW is only applicable for interworking with EPC scenario
-- when UE is connected to P-GW+SMF via EPC
	iSMF			(5),
	ePDG			(6),
-- ePDG is only applicable for interworking with EPC scenario
-- when UE is connected to P-GW+SMF via EPC/ePDG
	cEF				(7),
	nEF			(8),
	pGWCSMF			(9),
	mnS-Producer 	(10)


}

NgApCause	::= SEQUENCE
-- See 3GPP TS 29.571 [249] for details.
{
	group			[0] INTEGER,
	value			[1] INTEGER
}

NgeNbId		::= IA5String (SIZE(1..21))
--
-- See 3GPP TS 29.571 [249] for details.
-- 

NGRANSecondaryRATType	::= OCTET STRING
-- 
-- "NR" or "EUTRA"
-- 
 

NGRANSecondaryRATUsageReport	::= SEQUENCE
{
	nGRANSecondaryRATType			[0] NGRANSecondaryRATType OPTIONAL,
	qosFlowsUsageReports			[1] SEQUENCE OF QosFlowsUsageReport OPTIONAL
}

Nid		::= UTF8String--
-- See 3GPP TS 29.571 [249] for details.
-- 

NrCellId		::= UTF8String
--
-- See 3GPP TS 29.571 [249] for details.
-- 


NsiLoadLevelInfo		::= SEQUENCE
-- 
-- See 3GPP TS 29.520 [233] for details
-- 
{
	loadLevelInformation				[0] INTEGER OPTIONAL,
	snssai								[1] SingleNSSAI OPTIONAL,
	nsiId								[2] OCTET STRING OPTIONAL
}

NSPAContainerInformation		::= SEQUENCE
{
	latency								[0] INTEGER OPTIONAL,
	throughput							[1] Throughput OPTIONAL,
	maximumPacketLossRate				[3] UTF8String OPTIONAL,
	serviceExperienceStatisticsData		[4] ServiceExperienceInfo OPTIONAL,
	numberOfPDUSessions					[5] INTEGER OPTIONAL,
	numberOfRegisteredSubscribers		[6] INTEGER OPTIONAL,
	loadLevel							[7] NsiLoadLevelInfo OPTIONAL
}

NSSAIMap		::= SEQUENCE
{
	servingSnssai						[0] SingleNSSAI,
	homeSnssai							[1] SingleNSSAI
 
}


-- 
-- O
-- 


OperationalState 	::= ENUMERATED
{
	eNABLED	(0),
	dISABLED(1)

}


-- 
-- P
-- 


PartialRecordMethod	::= ENUMERATED
{
	default			(0),
	individual		(1)
}

PDUAddress 	::= SEQUENCE
{
	pDUIPv4Address				[0] IPAddress OPTIONAL,
	pDUIPv6AddresswithPrefix		[1] IPAddress OPTIONAL,
	iPV4dynamicAddressFlag		[2] DynamicAddressFlag OPTIONAL,
	iPV6dynamicPrefixFlag		[3] DynamicAddressFlag OPTIONAL,  
	additionalPDUIPv6Prefixes	[4]	SEQUENCE OF IPAddress OPTIONAL
}

PDUSessionId 		::= INTEGER (0..255)
-- 
-- See 3GPP TS 29.571 [249] for details
-- 

PDUSessionType		::= ENUMERATED
{
	iPv4v6			(0),
	iPv4			(1),
	iPv6			(2),
	unstructured	(3),
	ethernet		(4)
}
-- See 3GPP TS 29.571 [249] for details.


PreemptionCapability		::= ENUMERATED
{
	nOT-PREEMPT			(0),
	mAY-PREEMPT			(1)
}

PreemptionVulnerability		::= ENUMERATED
{
	nOT-PREEMPTABLE		(0),
	pREEMPTABLE			(1)
}

PSCellInformation	::= SEQUENCE
{
	nRcgi					[0] Ncgi OPTIONAL,
	ecgi					[1] Ecgi OPTIONAL 

}

-- 
-- Q
-- 

QoSCharacteristics	::= OCTET STRING
-- 
-- This data is converted from JSON format of the QoSCharacteristics as described in TS 29.512
-- [251].
--

QoSFlowId		::= INTEGER

QosFlowsUsageReport		::= SEQUENCE
{
	qosFlowId						[0] QoSFlowId OPTIONAL,
	startTime						[1] TimeStamp,
	endTime							[2] TimeStamp,
	dataVolumeDownlink				[3] DataVolumeOctets,
	dataVolumeUplink					[4] DataVolumeOctets
}
QuotaManagementIndicator	::= ENUMERATED
{
	onlineCharging				(0),
	offlineCharging				(1),
	quotaManagementSuspended	(2)
}


-- 
-- R
-- 

RanUeNgapId	::= INTEGER 


RANNASRelCause 		::= SEQUENCE
-- Mode details are described in TS 29.512[251].
{
	ngApCause		[0] NgApCause OPTIONAL,
	fivegMmCause	[1] FiveGMmCause OPTIONAL,
	fivegSmCause	[2] FiveGSmCause OPTIONAL,
	epsCause		[3] RANNASCause OPTIONAL
}

RatingIndicator	::= BOOLEAN
-- Included if the units have been rated.

RATType		::= INTEGER
--
-- This integer is based on the RatType specified in TS 29.571 [249]
-- with 3GPP RAT Type specified in TS 29.061 [216] added for backwards compatibility.
--
{
-- 0 reserved
-- 1 reserved for uTRA
-- 2 reserved for gERA
	wLAN			(3),
-- 4 reserved for GAN
-- 5 reserved for HSPA Evolution
	eUTRAN			(6),
	virtual			(7),
-- 8 reserved for nBIoT
-- 9 reserved for lTEM
	nR				(51),
-- 51 is used for NG-RAN
	wIRELINE		(55),
	wIRELINE-CABLE	(56),
	wIRELINE-BBF	(57),
	tRUSTED-N3GA	(65)
-- 101 reserved for IEEE 802.16e
-- 102 reserved for 3GPP2 eHRPD
-- 103 reserved for 3GPP2 HRPD
-- 104 reserved for 3GPP2 1xRTT
-- 105 reserved for 3GPP2 UMB
}

RegistrationMessageType		::= ENUMERATED
{
	initial			(0),
	mobility		(1),
	periodic		(2),
	emergency		(3),
	deregistration	(4)
}

RestrictionType		::= ENUMERATED
{
	allowedAreas	(0),
	notAllowedAreas	(1)
}


RoamingChargingProfile 		::= SEQUENCE
{
	roamingTriggers			[0] SEQUENCE OF RoamingTrigger OPTIONAL,
	partialRecordMethod		[1] PartialRecordMethod OPTIONAL
}

RoamerInOut	::= ENUMERATED
{
	roamerInBound		(0),
	roamerOutBound		(1)
}

RoamingTrigger 		::= SEQUENCE
{
	trigger					[0] SMFTrigger OPTIONAL,
	triggerCategory			[1] TriggerCategory	 OPTIONAL,
	timeLimit				[2] CallDuration OPTIONAL,
	volumeLimit				[3] DataVolumeOctets OPTIONAL,
	maxNbChargingConditions	[4] INTEGER OPTIONAL
}

RrcEstablishmentCause	::= OCTET STRING




-- 
-- S
-- 

ServiceAreaRestriction	::= SEQUENCE
{
	restrictionType					[0] RestrictionType OPTIONAL,
	areas							[1] SEQUENCE OF Area OPTIONAL,
	maxNumOfTAs						[2] INTEGER OPTIONAL,
	maxNumOfTAsForNotAllowedAreas	[3] INTEGER OPTIONAL

}
-- See 3GPP TS 29.571 [249] for details.

ServiceExperienceInfo	::= SEQUENCE
-- 
-- See 3GPP TS 29.520 [233] for details
-- 
{
	svcExprc						[0] SvcExperience OPTIONAL,
	svcExprcVariance				[1] INTEGER OPTIONAL,
	snssai						[2] SingleNSSAI OPTIONAL,
	appId						[3] OCTET STRING OPTIONAL,
	confidence					[4] INTEGER OPTIONAL,
	dnn							[5] DataNetworkNameIdentifier OPTIONAL,
	networkArea					[6] NetworkAreaInfo OPTIONAL,
	nsiId						[7] OCTET STRING OPTIONAL,
	ratio						[8] INTEGER OPTIONAL
}

ServiceProfileChargingInformation 	::= SET
{
--
-- attributes of the service profile: see TS 28.541 [254]
--
	serviceProfileIdentifier				[0] OCTET STRING OPTIONAL,
	sNSSAIList							[1] SEQUENCE OF SingleNSSAI OPTIONAL,
	sST			 						[2] SliceServiceType OPTIONAL,
	latency								[3] INTEGER OPTIONAL,
	availability							[4]	INTEGER OPTIONAL,
	resourceSharingLevel					[5] SharingLevel OPTIONAL,
	jitter								[6]	INTEGER OPTIONAL,
	reliability							[7] OCTET STRING OPTIONAL,
	maxNumberofUEs 						[8] INTEGER OPTIONAL,
	coverageArea 						[9] OCTET STRING OPTIONAL,
	uEMobilityLevel						[10] MobilityLevel OPTIONAL,
	delayToleranceIndicator 				[11] DelayToleranceIndicator OPTIONAL,
	dLThroughtputPerSlice				[12] Throughput OPTIONAL,
	dLThroughtputPerUE					[13] Throughput OPTIONAL,
	uLThroughtputPerSlice				[14] Throughput OPTIONAL,
	uLThroughtputPerUE					[15] Throughput OPTIONAL,
	maxNumberofPDUsessions 				[16] INTEGER OPTIONAL,
	kPIsMonitoringList 					[17] OCTET STRING OPTIONAL,
	supportedAccessTechnology			[18] INTEGER OPTIONAL,
	v2XCommunicationMode 				[19] V2XCommunicationModeIndicator OPTIONAL,
	addServiceProfileChargingInfo		[100] OCTET STRING OPTIONAL

}

ServingNetworkFunctionID	::= SEQUENCE
{
	servingNetworkFunctionInformation	[0] NetworkFunctionInformation,
	aMFIdentifier						[1] AMFID OPTIONAL

}

SessionAMBR	::= SEQUENCE
{
	ambrUL				[1] Bitrate,
	ambrDL				[2] Bitrate
}

SharingLevel	::= ENUMERATED
{
	sHARED			(0),
	nON-SHARED		(1)

}
 

SingleNSSAI	::= SEQUENCE
-- See S-NSSAI subclause 28.4.2 of TS 23.003 [200] for encoding.
{
	sST			[0] SliceServiceType,
	sD 			[1] SliceDifferentiator OPTIONAL
}

SliceServiceType ::= INTEGER (0..255)
--
-- See subclause 28.4.2 TS 23.003 [200]
--

SliceDifferentiator		::= OCTET STRING (SIZE(3))
--
-- See subclause 28.4.2 TS 23.003 [200]
--


SMdeliveryReportRequested ::= ENUMERATED
{
	yes		(0),
	no		(1)
}

SMFTrigger				::= INTEGER
{
	startOfPDUSession							(1),
	startOfServiceDataFlowNoSession				(2),
-- Change of Charging conditions
	qoSChange									(100),
	userLocationChange							(101),
	servingNodeChange							(102),
	presenceReportingAreaChange					(103),
	threeGPPPSDataOffStatusChange				(104),
	tariffTimeChange							(105),
	uETimeZoneChange							(106),
	pLMNChange									(107),
	rATTypeChange								(108),
	sessionAMBRChange							(109),
	additionOfUPF								(110),
	removalOfUPF 								(111),
	insertionOfISMF								(112),
	removalOfISMF								(113),
	changeOfISMF								(114),
	gFBRGuaranteedStatusChange					(115),
	additionOfAccess							(116),
	removalOfAccess 							(117),
-- Limit per PDU session
	pDUSessionExpiryDataTimeLimit				(200),
	pDUSessionExpiryDataVolumeLimit				(201),
	pDUSessionExpiryDataEventLimit				(202),
	pDUSessionExpiryChargingConditionChanges	(203),
-- Limit per Rating group
	ratingGroupDataTimeLimit					(300),
	ratingGroupDataVolumeLimit					(301),
	ratingGroupDataEventLimit					(302),
-- Quota management
	timeThresholdReached						(400),
	volumeThresholdReached						(401),
	unitThresholdReached						(402),
	timeQuotaExhausted							(403),
	volumeQuotaExhausted						(404),
	unitQuotaExhausted							(405),
	expiryOfQuotaValidityTime					(406),
	reAuthorizationRequest						(407),
	startOfServiceDataFlowNoValidQuota			(408),
	otherQuotaType								(409),
	expiryOfQuotaHoldingTime					(410),
	startOfSDFAdditionalAccessNoValidQuota		(411),
-- Others 
	terminationOfServiceDataFlow				(500),
	managementIntervention						(501),
	unitCountInactivityTime						(502),
	endOfPDUSession								(503),
	cHFResponseWithSessionTermination			(504),
	cHFAbortRequest								(505),
	abnormalRelease								(506),
	notProvidedBySMF							(507), -- used if not provided by SMF
-- Limit per QoS Flow
	qoSFlowExpiryDataTimeLimit					(600),
	qoSFlowExpiryDataVolumeLimit				(601),
-- interworking with EPC
	eCGIChange									(700),
	tAIChange									(701),
	handoverCancel								(702),
	handoverStart								(703),
	handoverComplete							(704)

}
-- See TS 32.255 [15] for details.

SMReplyPathRequested	::= ENUMERATED
{
	noReplyPathSet 			(0),
	replyPathSet			(1)
}

SMServiceType 	::= INTEGER
{
-- 0 to 10 VAS4SMS Short Message, see TS TS 22.142 [x] for details
	contentProcessing					(0),
	forwarding							(1),
	forwardingMultipleSubscriptions		(2),
	filtering 							(3),
	receipt								(4),
	networkStorage						(5),
	toMultipleDestinations				(6),
	virtualPrivateNetwork				(7),
	autoreply							(8),
	personalSignature					(9),
	deferredDelivery					(10)
-- 11 to 99	Reserved for 3GPP defined SM services
-- 100 to 199 Vendor specific SM services
}

SmsIndication   ::= ENUMERATED
{
	sMSSupported 			(0),
	sMSNotSupported			(1)
}



SSCMode	::= INTEGER
{
	sSCMode1				(1),
	sSCMode2				(2),
	sSCMode3				(3)
}
-- See 3GPP TS 23.501 [247] for details.

SteerModeValue	::= ENUMERATED
{
	activeStandby 		(0),
	loadBalancing		(1),
	smallestDelay 		(2),
	priorityBased 		(3)

}


SubscribedQoSInformation	::= SEQUENCE
--
-- See TS 32.291 [58] for more information
-- 
{
	fiveQi				[1] INTEGER OPTIONAL,
	aRP					[2] AllocationRetentionPriority OPTIONAL,
	priorityLevel 		[3] INTEGER OPTIONAL
}


SvcExperience 	::= SEQUENCE
{
	mos					[0] INTEGER OPTIONAL,
	upperRange			[1] INTEGER OPTIONAL,
	lowerRange			[2] INTEGER OPTIONAL
}


-- 
-- T
-- 


TAC			::= OCTET STRING (SIZE(3))

TAI	::= SEQUENCE
{
	pLMNId		[0] PLMN-Id,
	tac			[1] TAC

}

TenantIdentifier			::= OCTET STRING 


Throughput	::= SEQUENCE
{
	guaranteedThpt			[0] Bitrate,
	maximumThpt				[1] Bitrate
}

TNAPId		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
-- 

TngfId		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
--


Trigger	::= CHOICE
{
	sMFTrigger		[0] SMFTrigger
}

TriggerCategory	::= ENUMERATED
{
	immediateReport		(0),
	deferredReport		(1)
}

TWAPId		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
--

-- 
-- U
-- 

UsedUnitContainer 		::= SEQUENCE
{
	serviceIdentifier					[0] ServiceIdentifier OPTIONAL,
	time								[1] CallDuration OPTIONAL,
	triggers								[2] SEQUENCE OF Trigger OPTIONAL,
	triggerTimeStamp						[3] TimeStamp OPTIONAL,
	dataTotalVolume						[4] DataVolumeOctets OPTIONAL,
	dataVolumeUplink						[5] DataVolumeOctets OPTIONAL,
	dataVolumeDownlink					[6] DataVolumeOctets OPTIONAL,
	serviceSpecificUnits					[7] INTEGER OPTIONAL,
	eventTimeStamp						[8] TimeStamp OPTIONAL,
	localSequenceNumber					[9] LocalSequenceNumber OPTIONAL,
	ratingIndicator						[10] RatingIndicator OPTIONAL,
	pDUContainerInformation				[11] PDUContainerInformation OPTIONAL,
	quotaManagementIndicator				[12] BOOLEAN OPTIONAL,
	quotaManagementIndicatorExt			[13] QuotaManagementIndicator OPTIONAL,
	nSPAContainerInformation				[14] NSPAContainerInformation OPTIONAL,
	eventTimeStampExt					[15] SEQUENCE OF TimeStamp OPTIONAL
}

--
-- UserLocationInformationStructured is an alternative ASN.1 format to UserLocationInformation
--

UserLocationInformation	::= OCTET STRING

UserLocationInformationStructured 	::= SEQUENCE
{
	eutraLocation				[0] EutraLocation OPTIONAL,
	nrLocation					[1] NrLocation OPTIONAL,
	n3gaLocation					[2] N3gaLocation OPTIONAL

}



-- 
-- This data is converted from JSON format of the User Location as described in TS 29.571 [249].
--

-- 
-- V
-- 

V2XCommunicationModeIndicator   ::= ENUMERATED
{
	v2XComSupported 			(0),
	v2XComNotSupported			(1)
}

-- 
-- W
-- 
WAgfId		::= UTF8String
-- 
-- See 3GPP TS 29.571 [249] for details
--

.#END

6	CDR encoding rules
6.0	Introduction
TS 32.297 [52] specifies the file based protocol for the "Bx" interface between the CDR generating node, i.e. the Charging Gateway Functionality, and the operator's Billing Domain (BD) (refer to TS 32.240 [1] for details on the charging architecture). The following subclauses define
- the various CDR encodings that are standardised within 3GPP,
- a method how to indicate the encoding applied to the CDRs,
- a version indication of the encoded CDRs.
The latter two items can be used by the system(s) in the BD to easily detect the encoding version used. See TS 32.297 [52] for a detailed description on how this information is used on the Bx interface.
6.1	3GPP standardized encodings
The contents of the CDRs sent on the Bx interface are defined by the ASN.1 language clause 5. A number of transfer syntaxes, or encodings, is specified for use in 3GPP systems as follows. For the CDR transfer via the Bx interface, as defined in TS 32.297 [52], the Basic Encoding Rules (ITU-T Recommendation X.690 [301]) encoding shall be supported by all 3GPP systems. Optionally, other additional CDR encodings, i.e. Packed Encoding Rules (ITU-T Recommendation X.691 [302]) and XML Encoding Rules (ITU-T Recommendation XER [303]) may also be offered.
The encoding applied to the CDRs is indicated by means of the "Data Record Format" parameter. The following "Data Record Format" values are used:
- "1" signifies the use of Basic Encoding Rules (BER);
- "2" signifies the use of unaligned basic Packed Encoding Rules (PER);
- "3" signifies the use of aligned basic Packed Encoding Rules (PER);
- "4" signifies the use of XML Encoding Rules (XER).
6.2	Encoding version indication
An indication of the version of the CDR definition and encoding shall be included in the CDR files transferred via the Bx interface specified in TS 32.297 [52]. This version indication consists of a Release Identifier and a Version Identifier.
For CDRs specified in referenced middle tier Charging TSs, applying the syntax as described in clause 5 of the present document, the Release Identifier and Version Identifier shall be set as per clause 6.1.2 of TS 32.297 [52]. 
Annex A (informative):
Void
Annex B (informative):
Bibliography
a)	The 3GPP charging specifications
- 	3GPP TS 32.276: "Telecommunication management; Charging management; Voice Call Service Charging".
-	3GPP TS 32.277: "Telecommunication management; Charging management; Proximity-based Services (ProSe) Charging".
-	3GPP TS 32.293: "Telecommunication management; Charging management; Proxy Function".
-	3GPP TS 32.295: "Telecommunication management; Charging management; Charging Data Record (CDR) transfer".
-	3GPP TS 32.296: "Telecommunication management; Charging management; Online Charging System (OCS) applications and interfaces".
b)	Common 3GPP specifications 
-	3GPP TS 22.101: "Service aspects; Service Principles".
c)	other Domain and Service specific 3GPP / ETSI / ITU specifications
-
c)	Network Management related specifications
Annex C (informative):
ASN.1 Cross-reference listing and fully expanded sources
The ASN.1 Cross-reference listing and the fully expanded ASN.1 sources of the Charging protocol are provided for information at http://www.3gpp.org/ftp/Specs/archive/32_series/32.298/ASN.1/
Annex D (informative):
Change history
Change history
Date
TSG #
TSG Doc.
CR
Rev
Subject/Comment
Cat
Old
New
Sep 2009
SP-45
SP-090541
0103
-
Add MBMS GW address
B
9.0.0
9.1.0
Sep 2009
SP-45
SP-090536
0105
-
Rel-9 CR 32.298 correction of number portability and carrier select information
A
9.0.0
9.1.0
Sep 2009
SP-45
SP-090538
0106
-
Add "Closed User Group (CUG)" for MMTel Charging
B
9.0.0
9.1.0
Sep 2009
SP-45
SP-090538
0107
-
Add 3PTY MMTel supplementary service charging
B
9.0.0
9.1.0
Sep 2009
SP-45
SP-090538
0108
-
CDR parameter for RTTI support in IMS offline charging
B
9.0.0
9.1.0
Sep 2009
SP-45
SP-090536
0110
-
Set of Corrections in ASN1 description for IMS CDRs
A
9.0.0
9.1.0
Sep 2009
SP-45
SP-090536
0112
-
Set of Corrections in ASN1 description for EPC CDRs
A
9.0.0
9.1.0
Sep 2009
SP-45
SP-090536
0114
-
Correction on Charging Characteristics Format
A
9.0.0
9.1.0
Sep 2009
SP-45
SP-090537
0115
-
Emergency bearer service consideration for charging
B
9.0.0
9.1.0
Sep 2009
SP-45
SP-090536
0117
-
Correction to MO and MT SMS CDRs for SMS over SGs
A
9.0.0
9.1.0
Sep 2009
SP-45
SP-090536
0119
-
Remove CAMEL Charging Information from SGW CDR
A
9.0.0
9.1.0
Sep 2009
SP-45
SP-090536
0121
-
Addition of IP multicast delivery related contents in MBMS information
A
9.0.0
9.1.0
Dec 2009
SP-46
SP-090720
0123
-
Correction of PDP/PDN Type
A
9.1.0
9.2.0
Dec 2009
SP-46
SP-090720
0125
-
Alignment with TS 32.251 for "Volume Limit" and "Time Limit" in Change-Condition AVP
A
9.1.0
9.2.0
Dec 2009
SP-46
SP-090720
0127
-
Alignment with TS 32.251 for "User location Change" Condition in  ServiceConditionChange and ChangeCondition
A
9.1.0
9.2.0
Dec 2009
SP-46
SP-090720
0129
-
Correction of interOperatorIdentifiers information alignment with TS 32.260
A
9.1.0
9.2.0
Dec 2009
SP-46
SP-090720
0131
-
Clarify "Change Condition" setting for containers level and "Cause for record Closing" for CDR level for P-GW and S-GW.
A
9.1.0
9.2.0
Dec 2009
SP-46
SP-090720
0133
-
Correction on priority session treatment - alignment with TS 22.153
A
9.1.0
9.2.0
Dec 2009
SP-46
SP-090721
0134
-
Editorial clean-up
D
9.1.0
9.2.0
Dec 2009
SP-46
SP-090721
0135
-
Add CSG parameters for CSG based offline charging
B
9.1.0
9.2.0
Mar 2010
SP-47
SP-100040
136
-
Correction of the Role of Node charging parameter definition
A
9.2.0
9.3.0
Mar 2010
SP-47
SP-100041
137
-
Old/New location description for Location update VLR record - Alignment with TS 32.250.
F
9.2.0
9.3.0
Mar 2010
SP-47
SP-100041
138
-
Correction on Session Id for AS acting as B2BUA
F
9.2.0
9.3.0
Mar 2010
SP-47
SP-100040
141
-
Correction on MMTel CDR description for Early SDP- Alignment with TS 32.260
A
9.2.0
9.3.0
Mar 2010
SP-47
SP-100040
143
-
Correction in MMTel Charging for session priority - Alignment with TS 32.260
A
9.2.0
9.3.0
Mar 2010
SP-47
SP-100041
144
-
Correction on SDP handling in IMS Charging
F
9.2.0
9.3.0
Mar 2010
SP-47
SP-100044
145
-
Add "Personal Network management" MMTel supplementary service charging description
B
9.2.0
9.3.0
Mar 2010
SP-47
SP-100044
146
-
Add "Customized Ringing Signal (CRS)" MMTel supplementary service charging description
B
9.2.0
9.3.0
Mar 2010
SP-47
SP-100040
147
-
Correction for offline Charging from PGW - 3GPP2 User location
A
9.2.0
9.3.0
Mar 2010
SP-47
SP-100042
148
-
Add Originating Address in SGSNSMTRecord
B
9.3.0
10.0.0
Jun 2010
SP-48
SP-100266
150
-
Correction on ASN.1 definitions
A
10.0.0
10.1.0
Jun 2010
SP-48
SP-100266
152
-
Charging information for Emergency IMS Sessions
A
10.0.0
10.1.0
Oct 2010
SP-49
SP-100496
155
-
Correction for Dual IP addresses associated to one PDN connection
A
10.1.0
10.2.0
Oct 2010
SP-49
SP-100496
158
-
Correction on SDP-Type
A
10.1.0
10.2.0
Dec 2010
SP-50
SP-100754
161
2
Add the missing RecordType for GWMBMSRecord
A
10.2.0
10.3.0
Dec 2010
SP-50
SP-100757
164
2
Add missing Charging Data Record (CDR) tag for MMTelRecord
A
10.2.0
10.3.0
Dec 2010
SP-50
SP-100758
166
2
Add missing timestamp granularity
A
10.2.0
10.3.0
Dec 2010
SP-50
SP-100758
170
-
Correction of Data Volume Uplink & Downlink in the "List of Service Data" parameter
A
10.2.0
10.3.0
Mar 2011
SP-51
SP-110109
171
2
Correction on ICSI availability - Align with SA2 TS 23.228
F
10.3.0
10.4.0
Mar 2011
SP-51
SP-110105
172
3
Adding CDR fields needed for Machine Type Communication
B
10.3.0
10.4.0
Mar 2011
SP-51
SP-110109
177
1
Addition of IARI in IMS charging information, alignment with TS 22.115 and TS 23.228
B
10.3.0
10.4.0
Mar 2011
SP-51
SP-110108
179
1
Correction on ASN.1
A
10.3.0
10.4.0
Mar 2011
SP-51
SP-110109
181
1
Correction on Subscriber role
F
10.3.0
10.4.0
Mar 2011
SP-51
SP-110108
182
1
Introduction of new CDRs for SRVCC feature in enhanced MSC server
A
10.3.0
10.4.0
Mar 2011
SP-51
SP-110108
183
1
Corrections in ASN.1 description
A
10.3.0
10.4.0
Mar 2011
SP-51
SP-110112
184
-
Add 'Advice Of Charge (AoC)' MMTel supplementary service Charging description - Align with 32.275
B
10.3.0
10.4.0
Mar 2011
SP-51
SP-110109
185
1
MMTel Charging enhancement for alignment with generic AS Charging description in TS 32.260
C
10.3.0
10.4.0
Mar 2011
SP-51
SP-110108
187
1
Correction on availability of Called Asserted Identity
A
10.3.0
10.4.0
May 2011
SP-52
SP-110281
193
-
Correction with reference to Access Correlation ID
F
10.4.0
10.5.0
May 2011
SP-52
SP-110281
196
1
Correction of RAT-Type AVP, alignment with TS 29.212, Gx interface
F
10.4.0
10.5.0
May 2011
SP-52
SP-110404
198
1
Correction on Qos information - Alignment with TS 29.212
A
10.4.0
10.5.0
May 2011
SP-52
SP-110294
199
1
CDRs enhancement for OMR Charging introduction
B
10.4.0
10.5.0
May 2011
SP-52
SP-110280
201
1
Correction in SCC AS CDR for IMS service continuity
A
10.4.0
10.5.0
May 2011
SP-52
SP-110281
205
1
Correction on IMS Application Reference Identifier (IARI) in IMS Charging
F
10.4.0
10.5.0
Sep 2011
SP-53
SP-110528
208
-
Correction on PDN connection identifier for Charging
A
10.5.0
10.6.0
Sep 2011
SP-53
SP-110528
211
1
Solve Editor's Note on Charging Id
A
10.5.0
10.6.0
Sep 2011
SP-53
SP-110530
213
1
Correction on MT-LR CDR - Alignment with TS 23.271
F
10.5.0
10.6.0
Sep 2011
SP-53
SP-110530
214
1
Correction for IARI - Alignment with TS 24.229
F
10.5.0
10.6.0
Sep 2011
SP-53
SP-110529
219
1
Alignment of the occurrence condition for IMSI with TS 32.251
A
10.5.0
10.6.0
Sep 2011
SP-53
SP-110528
222
-
Correction on RAT Type - Align with CT3 TS 29.061
A
10.5.0
10.6.0
Sep 2011
SP-53
SP-110528
225
-
Correction on pdpPDNtype for PGW
A
10.5.0
10.6.0
Sep 2011
SP-53
SP-110528
227
1
Removal of placeholder duplication for ASN.1 source code
A
10.5.0
10.6.0
Sep 2011
SP-53
SP-110528
274
-
Correction for dynamic address flags associated to PDN connection of PDP/PDN type IPv4v6
A
10.5.0
10.6.0
Sep 2011
SP-53
--
--
--
Editorial correction of misimplementation of CR 0153 in SP-100496 from SA#49 (move of 5.1.2.2.64A from clause 5.1.2.1 to 5.1.2.2).
--
10.5.0
10.6.0
Sep 2011
SP-53
SP-110541
0238
1
Addition of Sponsored Data Connectivity charging – Align with TS 23.203
B
10.6.0
11.0.0
Dec 2011
SP-54
SP-110708
0308
1
Correction on PDP/PDN Address definition - Alignment with TS 23.401
A
11.0.0
11.1.0
Dec 2011
SP-54
SP-110708
0301
1
Correction on RatingGroupId and ResultCode range
A
11.0.0
11.1.0
Dec 2011
SP-54
SP-110709
0290
1
Correction on MSC-SRVCC CDRs for Suppl services and location
A
11.0.0
11.1.0
Dec 2011
SP-54
SP-110712
0276
2
Add Transit IOI to IMS Offline Charging
B
11.0.0
11.1.0
Dec 2011
SP-54
SP-110710
0304
1
Correction on ASN.1 syntax – alignment with TS 29.002
A
11.0.0
11.1.0
Dec 2011
SP-54
SP-110710
0311
--
Correction on PDP/PDN Address definition - Alignment with TS 23.401
A
11.0.0
11.1.0
Dec 2011
SP-54
SP-110711
0302
2
Remove the Size Limitation to ChargingRuleBaseName
C
11.0.0
11.1.0
Mar 2012
SP-55
SP-120047
0321
1
Correction for E-UTRAN location (TAI and E-CGI) on Location Update (VLR) record
A
11.1.0
11.2.0
Mar 2012
SP-55
SP-120048
0313
1
Clarification on “SGSN Change” in PGW CDRs
A
11.1.0
11.2.0
Mar 2012
SP-55
SP-120049
0318
1
Add Status in IMS Charging CDR
B
11.1.0
11.2.0
Mar 2012
SP-55
SP-120055
0320
1
Correction on Charging for Mobile Terminating Roaming Forwarding (MTRF) – alignment with TS 23.018
A
11.1.0
11.2.0
June-2012
SP-56
SP-120362
0323
1
Correction of Serving Node Type, alignment with 29.274
F
11.2.0
11.3.0
June-2012
SP-56
SP-120360
0325
1
Correction of CDRs for SRVCC
A
11.2.0
11.3.0
June-2012
SP-56
SP-120374
0328
2
Enhancing IMS charging for RAVEL
B
11.2.0
11.3.0
June-2012
SP-56
SP-120360
0331
2
Correction on SGW and PGW Address reporting, alignment with 29.212
A
11.2.0
11.3.0
June-2012
SP-56
SP-120397
0332
1
Add charging parameters for NetLoc
B
11.2.0
11.3.0
June-2012
SP-56
SP-120359
0336
1
Correction of List of Message Bodies
A
11.2.0
11.3.0
Sep-2012
SP-57
SP-120646
0340
1
Rename Service-type AVP
A
11.3.0
11.4.0
Sep-2012
SP-57
SP-120576
0341
-
Introduction of Loopback indicator in BGCF CDR for RAVEL
B
11.3.0
11.4.0
Sep-2012
SP-57
SP-120561
0345
-
Remove Authorised-Qos from P-CSCF CDR
A
11.3.0
11.4.0
Sep-2012
SP-57
SP-120576
0346
1
Add TRF CDR to Offline Charging
B
11.3.0
11.4.0
Sep-2012
SP-57
SP-120575
0353
1
Addition of MS Timezone for NetLoc
B
11.3.0
11.4.0
Sep-2012
SP-57
SP-120566
0355
1
Correction of calling party handling
C
11.3.0
11.4.0
Sep-2012
SP-57
SP-120561
0359
1
Corrections to ASN.1 Syntax Definitions
A
11.3.0
11.4.0
Sep-2012
SP-57
SP-120627
0360
1
Reference list correction to align with the corrected TS 29.212 title
F
11.3.0
11.4.0
Sep-2012
SP-57
SP-120562
0362
1
Correction of Called-Party-Address AVP
A
11.3.0
11.4.0
Dec-2012

SP-58
SP-120785
0369
2
Emergency Indicator introduction in P-CSCF CDR
A
11.4.0
11.5.0

SP-58
SP-120784
0373
-
Corrections of GenericChargingDataTypes and CSChargingDataTypes modules ASN.1 syntax definitions
A
11.4.0
11.5.0

SP-58
SP-120786
0375
-
Corrections of GPRSChargingDataTypes module ASN.1 syntax definitions
A
11.4.0
11.5.0

SP-58
SP-120789
0376
-
Corrections of MMSChargingDataTypes module ASN.1 syntax definitions
F
11.4.0
11.5.0

SP-58
SP-120793
0378
3
Offline Charging description for ATCF
B
11.4.0
11.5.0

SP-58
SP-120792
0379
1
Introduction SMS CDRs description for SMS over MME Charging
B
11.4.0
11.5.0
Dec-2012
SP-58
SP-120793
0380
1
Introduction ASN.1 description for combined IBCF and ATCF CDR
B
11.4.0
11.5.0
Dec-2012
SP-58
SP-120789
0382
2
Correction on charging for IMS transit functions
F
11.4.0
11.5.0
Mar-2013
SP-59
SP-130062
0366
3
Multiple sets of inter operator identifiers in IMS CDRs for IMS roaming
F
11.5.0
11.6.0


SP-130054
0384
1
Related ICID Corrections for SRVCC Charging Correlation
F




SP-130051
0387
-
Emergency Indicator introduction in S-CSCF and I-CSCF CDR
A




SP-130052
0389
-
Correction on PDPAddressPrefixLength
A


Jun-2013
SP-60
SP-130279
0392
-
Remove RTTI from TRF and TF CDRs
F
11.6.0
11.7.0


SP-130270
0393
1
Addition of IMS Visited Network Identifier
F





0397
1
Introduction of Charging for access to Trusted WLAN Access Network in EPC - over S2a
F




SP-130271
0396
1
Adjustment on IMEI - alignment with TS 29.274
F
11.7.0
12.0.0


SP-130271
0398
1
Add SIP Reason Header Information to CDR for IMS Offline Charging
B


Sep-2013
SP-61
SP-130435
0404
1
Additional Access Network Information Field
B
12.0.0
12.1.0



0405
-
retransmission indication in PS CDRs
F


Dec-2013
SP-62
SP-130676
0410
1
Correction on missing Serving Network in PS CDRs for Network Sharing
A
12.1.0
12.2.0


SP-130619
0411
2
Addition of Instance Id for IMS Charging
B




SP-130620
0412
1
Requirements for Application Based Charging functionality
B




SP-130677
0417
1
Correction on Serving Node PLMN description in EPC CDRs for Network Sharing
A




SP-130671
0422
-
Correction on inconsistencies for MMTel Charging
A




SP-130620
0423
1
Addition of TDF CDR for Application Based Charging functionality
B




SP-130627
0425
1
Correction for Route Header for IMS Interconnection Charging
A


Mar-2014
SP-63
SP-140034
0428
1
Correction for User Location Info Time
A
12.2.0
12.3.0


SP-140045
0429
-
Introduction of new SC-SMO and SC-SMT CDRs description
B




SP-140033
0440
1
Correction for S-GW change cause for record closing
A




SP-140037
0442
1
Charging management for IMS Centralized Services (ICS)
C


Jun-2014
SP-64
SP-140337
0443
1
To add field definitions and make clarifications for application based charging in alignment with TS 32.251
B
12.3.0
12.4.0



0444
2
Clarifications for ASN.1 related to TDF based charging
B




SP-140341
0445
1
Introduce IPE-CDR and complete TDF-CDR description
B




SP-140334
0450
1
Removal of IMS charging identifier from PGW CDR
A




SP-140336
0451
-
Introduce Core Network Operator selection origin for Shared Networks
B




SP-140339
0452
1
Introduction of charging information for CHIPS - align with TS 32.251
B




SP-140346
0454
1
Correction for TADS indication in ASN.1
A




SP-140343
0456
1
Correction to support multiple Transit IOI Lists in AS, TF and MMTel CDRs
A


2014-07
-
-
-
-
Rapporteur/MCC: General editorial changes and clean-up.
-
12.4.0
12.4.1
2014-09
SP-65
SP-140565
0470
1
Introduction of Presence Reporting Areas for Charging
B
12.4.1
12.5.0


SP-140561
0475
1
Removal of CDIVN service
A




SP-140562
0476
1
Correction for expanded ASN.1 sources code generation
A




SP-140563
0477
1
Introduction of ASN.1 Cross-reference listing
B




SP-140564
0478
1
Corrections for alignment between charging specifications
F




SP-140563
0479
1
Introduction of report the most up to date User Location Information
B




SP-140567
0484
1
Introduce Charging Characteristics in Convergent scenario
B





0485
-
Introduce Traffic Data Volumes in IPE-CDR
B




SP-140563
0486
1
Complete ePDG offline charging description
B




SP-140568
0488
1
Correction on inconsistent defined parameter for NetLoc
A




SP-140567
0489
2
Corrections to include missing fixed user location information for NSWO
F




SP-140563

0490
-
Correction of Subscriber Equipment Number and Instance Id for privacy concerns
F





0492
1
Removal of I-WLAN solution
A


2014-12
SP-66
SP-140802
0498
1
Correction on User CSG Information in containers description for EPC offline Charging
A
12.5.0
12.6.0


SP-140804
0499
1
Correction on Inter Node Change in SGW and ePDG offline charging
F




SP-140805
0500
1
Additional corrections for removal of compiler errors
F




SP-140804
0501
1
Additional corrections for removal of I-WLAN solution
F




SP-140803
0505
1
Correction of List of SDP media Component field definition- align with 32260
A





0508
-
Consistency correction of SDP information occurrence in BGCF CDR
A


2015-03
SP-67
SP-150064
0513
1
Correction for unavailable fields in E-CSCF CDR
A
12.6.0
12.7.0



0517
-
Corrections for IPv6 Address Usage in PGW and SGW CDRs
A




SP-150067
0518
-
Corrections for IPv6 Address Usage in ePDG and TDF CDRs
F




SP-150066
0520
-
Correction for charging based on MBMS Data Transfer Time
A




SP-150065
0523
1
Inconsistency correction of subscriber role
A




SP-150069
0524
1
Introduction of CDR parameters for Prose Charging
B


2015-06
SP-68
SP-150332
0525
1
Alignment of Direct Communications CDR with PC3ch protocol
F
12.7.0
12.8.0



0526
-
Addition of Prose Function ID description
F




SP-150318
0527
1
Introduction of multiple Release causes in EPC Charging
B
12.8.0
13.0.0


SP-150326
0528
1
Correction for ProSe Charging
D


2015-09
SP-69
SP-150428
0529
1
Parameter details on enhancements for IMS Service Continuity
B
13.0.0
13.1.0


SP-150422
0532
1
Update of Reference RFC7315
A




SP-150417
0533
-
Introduction of multiple Release causes in ePDG offline charging
B




SP-150425
0538
1
Introduce ISUP release cause to MGCF CDR
B




SP-150458
0540
1
Correction of monitored PLMN Identifier parameter incorrect naming
A


2015-12
SP-70
SP-150696
0543
1
Correction for Access Network Information fields due to update to RFC 7315
A
13.1.0
13.2.0


SP-150707
0545
-
Correction on source code for ProSe Charging
A




SP-150698
0551
1
Correction on GPRS-Charging-Id value type
C




SP-150700
0553
1
Correction of Presence reporting area charging ASN.1 definition – alignement with 32.251
A




SP-150698
0554
1
Update NNI-Type ASN.1 for loopback
B




SP-150703
0555
1
Introduction of TWAG offline charging – charging information
B




SP-150701
0558
1
Introduction of ULI TZ Changes in IMS offline and online charging
B




SP-150698
0560
1
Charging support for Terminating Identification Presentation feature changes in terminating identity
B





0564
3
Correction on CS Location Information in SIP AS CDR
B




SP-150706
0566
1
Add NBIFOM related charging information
B




SP-150698
0568
1
Cell information received with untrusted WLAN access information
B


2016-03
SP-71
SP-160040
0569
1
Charging Id assignment for NBIFOM
B
13.2.0
13.3.0
2016-03
SP-71
SP-160034
0570
-
Correction for UE identification associated with inter-UE transfer
F
13.2.0
13.3.0
2016-03
SP-71
SP-160040
0571
1
Correction for Access Availability Change Reason
F
13.2.0
13.3.0
2016-03
SP-71
SP-160037
0572
1
ULI for untrusted wireless access network correction
F
13.2.0
13.3.0
2016-03
SP-71
SP-160035
0574
1
Introduction of CDR parameters for MONTE Charging
B
13.2.0
13.3.0

Change history
Date
Meeting
TDoc
CR
Rev
Cat
Subject/Comment
New version
2016-06
SA#72
SP-160416
0575
-
F
Correction of cell information received with untrusted WLAN access information – alignment with TS 24.229
13.4.0
2016-06
SA#72
SP-160412
0576
1
F
Correction for the editor’s notes about Monitoring-Type AVP
13.4.0
2016-06
SA#72
SP-160410
0582
1
A
Correction for Access Network Information in BGCF CDR – align with TS 32.260
13.4.0
2016-06
SA#72
SP-160416
0584
1
F
Corrections ASN.1 syntax errors for expanded source generation
13.4.0
2016-06
SA#72
SP-160420
0586
-
B
Completion of access change of service data flow for NBIFOM
13.4.0
2016-06
SA#72
SP-160420
0587
1
B
Completion of change of charging condition for NBIFOM
13.4.0
2016-06
SA#72
SP-160411
0588
3
B
Introduce CP Data transfer CDRs parameters and ASN.1
13.4.0
2016-06
SA#72
SP-160411
0590
1
B
Introduce non-IP PDN and CP CIoT opt in CDRs description
13.4.0
2016-09
SA#73
SP-160621
0593
1
F
Correction on APN Rate Control – Alignment with TS 23.401  
13.5.0
2016-09
SA#73
SP-160621
0595
1
F
Correction of trigger conditions description for NIDD submission
13.5.0
2016-09
SA#73
SP-160622
0596
-
F
Correction on ASN.1 syntax for IMS, SMS and MONTE CDRs
13.5.0
2016-09
SA#73
SP-160621
0597
1
F
Correction on Non-IP PDP type - alignement with TS 29.061
13.5.0
2016-09
SA#73
SP-160622
0598
-
F
Correction on CPDT CDRs ASN.1 description
13.5.0
2016-09
SA#73
SP-160621
0599
1
F
Correction on Control Plane CIoT EPS Optimisation Indicator in PGW - alignement with 23.401
13.5.0
2016-09
SA#73
SP-160621
0600
1
F
Correction on "MO exception data" RRC establishment cause in offline charging – alignement with TS 23.401
13.5.0
2016-09
SA#73
SP-160623
0592
1
F
Correction on the SubscriberEquipmentType – align with TS 32.299
14.0.0
2016-09
SA#73
SP-160623
0594
1
B
Complement of Charging per IP-CAN Session
14.0.0
2016-12
SA#74
SP-160847
0601
-
F
Correction on P-CSCF and IBCF for ATCF specific fields
14.1.0
2016-12
SA#74
SP-160858
0606
-
A
Correction on OMR attributes per media in IMS Charging
14.1.0
2016-12
SA#74
SP-160845
0612
-
A
Correction on Requested Party Address for Emergency IMS session
14.1.0
2016-12
SA#74
SP-160846
0614
1
A
Correction on ASN.1 in PS domain CDRs
14.1.0
2016-12
SA#74
SP-160844
0615
1
B
Addition of charging support for Mulitiple PRAs
14.1.0
2016-12
SA#74
SP-160847
0616
1
F
Correction of value in SM Message Type
14.1.0
2017-03
SA#75
SP-170144
0617
1
B
Charging enhancement for 3GPP PS Data off
14.2.0
2017-03
SA#75
SP-170133
0618
1
B
Addition of the fields for ProSe Charging
14.2.0
2017-03
SA#75
SP-170129
0619
1
B
Addition of multiple PRAs support for AULC
14.2.0
2017-03
SA#75
SP-170137
0621
1
A
Correction on the APN Rate Control and SCS/AS Address
14.2.0
2017-03
SA#75
SP-170132
0622
-
F
Correction of CauseForRecClosing and CauseForTerm
14.2.0
2017-03
SA#75
SP-170131
0623
1
A
Correction of RelatedChangeOfServiceCondition
14.2.0
2017-06
SA#76
SP-170501
0626
1
B
Introduction of 3GPP Data Off status indication in AS charging  
14.3.0
2017-06
SA#76
SP-170514
0627
1
F
Correction in ASN.1  
14.3.0
2017-06
SA#76
SP-170498
0630
1
B
Implement IMS visited network identifier for S8HR
14.3.0
2017-06
SA#76
SP-170497
0631
1
B
Addition of the fields for ProSe one-to-one communication Charging
14.3.0
2017-06
SA#76
SP-170499
0632
-
B
Deletion of the AULC support from TDF
14.3.0
2017-09
SA#77
SP-170649
0633
2
B
Introduce Device Trigger and SMS MO via T4 charging
14.4.0
2017-09
SA#77
SP-170648
0635
2
B
Addition of the fields for ProSe Direct discovery for public safety use
14.4.0
2017-09
SA#77
SP-170656
0640
2
A
Correction on handling of Private and Public user ID for IMS charging  
14.4.0
2017-09
SA#77
SP-170647
0641
3
B
Addition of FE Identifier List to IMS Charging
14.4.0
2017-09
SA#77
SP-170650
0643
1
B
Charging enhancement for eFMSS
15.0.0
2018-01
SA#78
SP-171005
0646
1
A
Correction where rANNASCause is defined as a sequence
15.1.0
2018-01
SA#78
SP-170970
0647
1
D
Editorial modification for eFMSS
15.1.0
2018-01
SA#78
SP-170966
0648
1
B
EPC QoS update to support NR as a secondary RAT
15.1.0
2018-01
SA#78
SP-170970
0650
-
B
Update list of service data containers
15.1.0
2018-03
SA#79
SP-180067
0653
-
A
Correction ASN.1 syntax
15.2.0
2018-03
SA#79
SP-180068
0654
1
B
Add CDR parameter for WLAN-based ProSe direct discovery
15.2.0
2018-03
SA#79
SP-180066
0655
1
F
Definition of how IMEI is to be transported in SubscriberEquipmentNumber
15.2.0
2018-03
SA#79
SP-180062
0656
1
B
Support for secondary RAT reporting from RAN
15.2.0
2018-06
SA#80
SP-180430
0657
3
B
Introduce the NAPS API Charging
15.3.0
2018-06
SA#80
SP-180427
0658
3
B
Enhance location information in trusted and untrusted WLAN
15.3.0
2018-06
SA#80
SP-180427
0659
2
B
Introduce Emergency services over WLAN
15.3.0
2018-06
SA#80
SP-180431
0660
-
F
Correction on ASN.1 type for RAN Secondary RAT Usage Report
15.3.0
2018-06
SA#80
SP-180426
0661
1
B
Introduce IMS over 5GS
15.3.0
2018-06
SA#80
SP-180427
0662
1
B
Enhance UE location description for IMS charging when over WLAN
15.3.0
2018-09
SA#81
SP-180834
0665
-
F
Update the value of secondary RAT type
15.4.0
2018-09
SA#81
SP-180834
0666
1
F
Add ChargingID to RAN Secondary RAT Usage Report
15.4.0
2018-09
SA#81
SP-180833
0667
1
B
Introduction of CHF-CDR
15.4.0
2018-09
SA#81
SP-180832
0668
1
B
Addition of DataVolumeOctets in generic CDR part
15.4.0
2018-09
SA#81
SP-180832
0669
1
B
Introduce new Charging Function record type
15.4.0
2018-09
SA#81
SP-180832
0670
1
B
Upgrade ASN1 modules version
15.4.0
2018-12
SA#82
SP-181041
0671
1
F
Correction on multiple PRA(s) in offline charging
15.5.0
2018-12
SA#82
SP-181057
0672
-
F
Correction of session priority values description
15.5.0
2018-12
SA#82
SP-181060
0676
1
A
Correction on wrong references
15.5.0
2018-12
SA#82
SP-181058
0677
1
F
Solve Editor's Note on Access Network charging Identifier
15.5.0
2018-12
SA#82
SP-181041
0678
1
F
Correction on the TTRL and TLTRL
15.5.0
2018-12
SA#82
SP-181057
0679
1
F
Correction of NetworkFunctionID in CHF CDR
15.5.0
2018-12
SA#82
SP-181052
0680
1
B
Addition of SMS Charging to CHF CDR
15.5.0
2018-12
SA#82
SP-181157
0681
1
F
Correct PDU Session level trigger in CHF CDR
15.5.0
2018-12
SA#82
SP-181052
0682
1
B
Addition of SMS info to CHF CDR
15.5.0
2018-12
SA#82
SP-181057
0683
1
B
 Introduction Data Volume Reporting for Option 4&7
15.5.0
2018-12
SA#82
SP-181052
0684
-
 B
 Introduction of 5GS for SMS charging via Ro Rf
15.5.0
2018-12
SA#82
SP-181052
0685
1
 B
 Introduction of offline charging for IP-SM-GW
15.5.0
2018-12
SA#82
SP-181054
0688
2
A
Correction of Data Volume Uplink and Downlink definition
15.5.0
2018-12
SA#82




Incorporates CR0680 that had the wrong spec on the cover page.
15.5.1
2019-03
SA#83
SP-190115
0689
1
F
Correction of of NSSAI
15.6.0
2019-03
SA#83
SP-190115
0690
-
F
Correction of subscriber equipment number 
15.6.0
2019-03
SA#83
SP-190116
0691
-
F
Correction of NF Consumer Information 
15.6.0
2019-03
SA#83
SP-190117
0692
-
F
Correction of SMSF as NF Consumer 
15.6.0
2019-03
SA#83
SP-190195
0693
1
F
Correction of PresenceReportingAreaNode ASN1 syntax 
15.6.0
2019-03
SA#83
SP-190115
0694
2
F
Correction of Qos Information
15.6.0
2019-03
SA#83
SP-190130
0698
1
A
Correction for multiple recipients in SC-SMO CDR 
15.6.0
2019-03
SA#83
SP-190116
0699
1
F
Correct usedUnitContainer to sequence of
15.6.0
2019-03
SA#83
SP-190116
0700
1
F
Correct missing Session Identifier
15.6.0
2019-03
SA#83
SP-190116
0701
1
F
Corrections on ASN.1 syntax and charging modules version
15.6.0
2019-03
SA#83
SP-190115
0703
1
F
Correction of serving network function
15.6.0
2019-03
SA#83
SP-190115
0704
1
F
Correction of PDU session Id
15.6.0
2019-03
SA#83
SP-190115
0705
-
F
Correction of missing fields in PDU Information
15.6.0
2019-03
SA#83
SP-190115
0706
2
F
Correction on Multiple Unit Information in charging data for CHF CDR
15.6.0
2019-03
SA#83
SP-190115
0707
1
F
Correction of User Information
15.6.0
2019-03
SA#83
SP-190115
0708
1
F
Correcting of Used Unit Container definition
15.6.0
2019-03
SA#83
SP-190115
0709
-
F
Correcting spelling of timeOfFirstUsage
15.6.0
2019-03
SA#83
SP-190115
0710
1
F
Correction of UE IP Addresses
15.6.0
2019-03
SA#83
SP-190115
0711
-
F
Correcting of Quota management Indicator in CDR
15.6.0
2019-03
SA#83
SP-190115
0712
-
F
Correcting of User Location Information definition
15.6.0
2019-03
SA#83
SP-190129
0702
1
B
Support status of VoLTE service delivery
16.0.0
2019-06
SA#84
SP-190384
0714
-
A
Corrections on ASN.1
16.1.0
2019-06
SA#84
SP-190384
0716
1
A
Correction of local sequence number
16.1.0
2019-06
SA#84
SP-190379
0720
-
A
Adding Rate-Control information and triggers to CDRs
16.1.0
2019-06
SA#84
SP-190383
0721
-
A
Correction of Presence Reporting Area
16.1.0
2019-09
SA#85
SP-190757
0722
1
B
Definition of charging parameter for interworking with EPC
16.2.0
2019-09
SA#85
SP-190750
0723
-
F
Correction of BGCF CDR description
16.2.0
2019-09
SA#85
SP-190840
0725
-
A
Correction on NetworkFunctionality
16.2.0
2019-09
SA#85
SP-190840
0727
1
A
Correction of NetworkFunctionInformation
16.2.0
2019-09
SA#85
SP-190751
0729
1
A
Serving PLMN Rate Control in List of Traffic Data Volumes
16.2.0
2019-09
SA#85
SP-190759
0734
1
A
Add the selection mode in PDU session information
16.2.0
2019-09
SA#85
SP-190759
0737
1
A
Correct inconsistent CHF CDR parameter
16.2.0
2019-09
SA#85
SP-190840
0740
1
F
Correction of AF Charging Identifier naming
16.2.0
2019-12
SA#86
SP-191162
0753
1
A
Add the Service Specification Information
16.3.0
2019-12
SA#86
SP-191156
0755
1
A
Correct inconsistent CHF CDR parameter
16.3.0
2019-12
SA#86
SP-191156
0757
-
A
Correction of ASN.1 NetworkFunctionName
16.3.0
2019-12
SA#86
SP-191156
0758
-
A
Correction on ASN.1 AMF ID
16.3.0
2019-12
SA#86
SP-191162
0759
1
A
Correction of userLocationInformation
16.3.0
2019-12
SA#86
SP-191162
0760
-
F
Correction of Multiple Unit Usage
16.3.0
2019-12
SA#86
SP-191162
0761
1
A
Correction of Network Function ID
16.3.0
2019-12
SA#86
SP-191162
0762
1
A
Correction of missing otherQuotaType in sMFTrigger
16.3.0
2019-12
SA#86
SP-191162
0766
1
A
Correction of references to 5G
16.3.0
2019-12
SA#86
SP-191162
0768
-
A
Correction of abnormal release trigger
16.3.0
2019-12
SA#86
SP-191153
0769
1
B
Introduce AMF CHF CDRs
16.3.0
2019-12
SA#86
SP-191156
0771
1
A
Correction of Serving Node change
16.3.0
2019-12
SA#86
SP-191156
0775
1
A
Clarify the use of the record extension
16.3.0
2019-12
SA#86
SP-191159
0778
1
F
Add the Qos Characteristics
16.3.0
2019-12
SA#86
SP-191167
0780
1
B
Adding I-SMF related SMFTrigger in CHF CDR
16.3.0
2019-12
SA#86
SP-191156
0783
-
A
Correction on unused quota timer
16.3.0
2019-12
SA#86
SP-191182
0784
1
B
Add VoLTE information
16.3.0
2019-12
SA#86
SP-191154
0786
-
B
Addition of CHF CDR for exposure function northbound API
16.3.0
2019-12
SA#86
SP-191162
0788
1
A
Correction to NF consumer identification
16.3.0
2019-12
SA#86
SP-191167
0789
1
B
Add NetworkFunctionality for I-SMF
16.3.0
2020-03
SA#87E
SP-200167
0794
1
F
Correction ASN.1 syntax
16.4.0
2020-03
SA#87E
SP-200166
0795
1
F
Incomplete indicator missing in CDR
16.4.0
2020-03
SA#87E
SP-200166
0797
1
F
Heading corrections
16.4.0
2020-03
SA#87E




Adding the ASN.1 in the zip file, no changes in the specification
16.4.1
2020-07
SA#88E
SP-200510
0800
1
A
Correction of startOfServiceDataFlowNoSession naming
16.5.0
2020-07
SA#88E
SP-200510
0802
-
A
Missing trigger for GFBR guaranteed status change
16.5.0
2020-07
SA#88E
SP-200507
0803
1
F
Missing I-SMF as network function
16.5.0
2020-07
SA#88E
SP-200484
0804
1
F
Missing QoS characteristics in QFI container
16.5.0
2020-07
SA#88E
SP-200484
0805
1
F
Missing time in QFI container
16.5.0
2020-07
SA#88E
SP-200486
0810
-
A
Correction ASN.1 imported module version
16.5.0
2020-07
SA#88E
SP-200505
0814
1
B
Add 5WWC charging information
16.5.0
2020-07
SA#88E
SP-200485
0817
1
F
Correcting backwards compatibility on CHF CDR
16.5.0
2020-07
SA#88E
SP-200485
0818
1
F
Correcting RATType in CHF CDR
16.5.0
2020-09
SA#89e
SP-200733
0819
1
B
Introduction of ATSSS
16.6.0
2020-09
SA#89e
SP-200745
0820
1
B
Introduction of NSM charging information
16.6.0
2020-09
SA#89e
SP-200813
0821
1
F
Correction of missing AF Charging Id in string format
16.6.0
2020-09
SA#89e
SP-200741
0823
1
F
Missing suspend of quota management
16.6.0
2020-09
SA#89e
SP-200743
0825
1
B
Add the NS performance and analytics charging parameter
16.6.0
2020-09
SA#89e
SP-200816
0826
2
F
Add 5WWC RAT types
16.6.0
2020-09
SA#89e
SP-200813
0827
-
F
Add QHT in CHF CDR
16.6.0
2020-09
SA#89e
SP-200740
0828
-
F
Add ePDG as serving node
16.6.0
2020-09
SA#89e




Correction of CR implementation that caused compilation issues
16.6.1
2020-12
SA#90e
SP-201051
0829
1
F
Add Multi-homed PDU Address in CHF-CDR for IPv6 multi-homing
16.7.0
2020-12
SA#90e
SP-201051
0830
1
F
Add the enhanced Diagnostics for 5G Charging
16.7.0
2020-12
SA#90e
SP-201051
0831
1
F
Add the ECGI and NCGI Support
16.7.0
2020-12
SA#90e
SP-201051
0832
-
F
Correction on missing NEF and PGW-C+SMF as NF consumers
16.7.0
2020-12
SA#90e
SP-201073
0833
-
F
Correction on User Equipment Info field format 
16.7.0
2020-12
SA#90e
SP-201051
0834
1
F
Correction on User Identifier field format 
16.7.0
2020-12
SA#90e
SP-201072
0836
1
A
Correction of SMS node address in CHF CDR
16.7.0
2020-12
SA#90e
SP-201072
0838
1
A
Correction of mandatory SMS message reference in CHF CDR
16.7.0
2020-12
SA#90e
SP-201051
0839
-
F
Correction of SMS message class in CHF CDR
16.7.0
2020-12
SA#90e
SP-201072
0841
1
A
Correction of SMS originator and recipient info in CHF CDR
16.7.0
2020-12
SA#90e
SP-201049
0843
1
A
Correcting charging id availability for all NF in CHF CDR
16.7.0
2020-12
SA#90e
SP-201049
0845
1
A
Correction for trigger not provided from SMF in CHF CDR
16.7.0
2020-12
SA#90e
SP-201051
0847
-
F
Correction of roamer in out from SMSF
16.7.0
2020-12
SA#90e
SP-201088
0852
-
F
Correction for alignment with drafting rules
16.7.0
2021-03
SA#91e
SP-210147
0855
1
F
Correction of SubscriptionID usage
16.8.0
2021-03
SA#91e
SP-210147
0856
1
F
Correcting backwards compatibility of AMFID
16.8.0
2021-03
SA#91e
SP-210147
0857
1
F
Correcting optional parameters for CHF CDR
16.8.0
2021-03
SA#91e
SP-210147
0858
-
F
Correcting missing value in CauseForRecClosing
16.8.0
2021-03
SA#91e
SP-210147
0859
1
F
Correcting diagnostic parameters for CHF CDR
16.8.0
2021-03
SA#91e
SP-210147
0860
2
F
Correcting eventTimeStamp as sequence
16.8.0
2021-03
SA#91e
SP-210147
0861
2
F
Correcting backwards compatibility for OriginatorInfo and RecipientInfo
16.8.0
2021-03
SA#91e
SP-210159
0862
1
F
Correction on different identities for NEF charging
16.8.0
2021-03
SA#91e
SP-210147
0863
2
F
Correction on user location information
16.8.0
2021-03
SA#91e
SP-210158
0864
1
F
Correction on missing MnS producer 
16.8.0
2021-03
SA#91e
SP-210163
0865
-
F
Correction on missing fields for CHF CDR - AMF  
16.8.0
2021-06
SA#93e
SP-210400
0867
1
F
Correction on PDU address using DHCPv6 for connected RG to 5GC
16.9.0
2021-06
SA#93e
SP-210418
0868
1
F
Correcting IPv6 text description
16.9.0
2021-06
SA#93e
SP-210418
0870
-
F
Correcting multiple presence reporting area information
16.9.0
2021-12
SA#94e
SP-211485
0879
1
F
Alignment of the charging data request and response
16.10.0
2022-06
SA#96
SP-220565
0893
1
F
Correction on the identifiers for NEF API Charging information
16.11.0
2022-06
SA#96
SP-220565
0899
-
F
Correction on presence reporting area information
16.11.0

