Bareos Regression
=================

Origial author: Kern Sibbald

This is Bareos's regression script directory.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Warning!!!! Make sure not to run it on the same system
with your production Catalog because the tables will all
be deleted (dropped and recreated).
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

bareos-regress package
======================

When using the bareos-regress package,
the software is already preconfigured to test bareos,
provided by the normal install packages.
The Bareos packages include a package that provide the required configuration:
bareos-regress-config

  # as root: stop all running bareos daemon

  # switch to user to bareos
  su - bareos -s /bin/bash

  # enable debug output
  export REGRESS_DEBUG=1

  # run a single test (and verify that it ends with "OK"
  tests/backup-bareos-test

  # run all disk tests
  ./all-disk-tests



Local Build
===========

get sources from github
-----------------------

  # get Bareos core
  git clone https://github.com/bareos/bareos-regress

  # get bareos-regress
  git clone https://github.com/bareos/bareos-regress

To set it up, create your personal configuration file, by
copying prototype.conf to config or simply editing prototype.conf
directly then copying it to the file config.

  cd bareos-regress
  cp prototype.conf config

You must end up with a file named config in the main regress
directory that has all the specifications that correspond to
your system.

Note, be sure it is not your production database
because Bareos will delete all the tables
and recreate them.

Then do:

   make setup

You run the above one time.
This will substitute all variables in the *.in files,
copy the Bareos source, configure and build it.
If you change your source, you will need to redo this command.

If you only change some bareos-regress *.in files,
only a "make sed" is required.

Then you can run any of the tests in the tests subdirectory.
Each test whose name ends in -root requires you to be root for
a resonable run.  Each test is totally independent of any other
test. Aside from the required "make setup", each test is totally
self-initalizing and should clean up after itself.

All the tests expect you to execute them from the main regress
directory.

Running the disk based tests:

You can run all the disk based tests by doing:

  ./do_disk

The disk based tests are totally separate from any production
system, provided you have configured the database appropriately
as noted above.

Running all the "standard" tests:

You can run all the disk and most of the tape tests by doing:

  ./do_all

======== Important !!! ============
When running the tape tests, Bareos will write on any tape that
is in the tape drive that you have configured.  If it is a production
Bareos tape, it will be destroyed.  If you have configured an Autochanger,
Bareos will write on the tapes in slots 1 and 2 thus destroying any
information on those tapes, even if they are Bareos production tapes.
===================================

Each of the above calls one or more scripts. By looking at the
scripts available in this directory, you can see that there are a number
of options for running tests.

You can run them individually as:

   tests/two-jobs-test

or all non-root tests (my normal testing under my account)

  ./all-non-root-tests

or all tests

   su
   ./all-tests


after running the root tests, while still root, it is a good idea
to do:

   make reset

this cleans up any files that may be created with root permissions.

Tape test naming convention:

The last part of the tape test name indicates (in general) what kind
of test it is.  They are broken (for the most part) into test names
ending with:

  -test     => a disk based test
  -tape     => a tape based test (can be a standalone tape drive
                or an autochanger). Only one tape will be used
                and it is assumed to be mounted.
  -changer  => you have an autochanger


Adding tests
============

If you want to add more tests, you can start from the example tests/1-example-test
and follow the instructions in this file, especially about where the configuration comes from
(configs/BASE plus individual extensions).

To avoid re-doing a make setup if you have made a change to the
conf files, and you do not need a new copy of the source, you can simply do:

   make sed



Debugging failed tests
======================

Prior versions required editing the tests/xxxx and changing a debug flag.
However, that has been replaced by two environment variables:

   REGRESS_DEBUG
   REGRESS_WAIT

If you define REGRESS_DEBUG, e.g.

   REGRESS_DEBUG=1
   export REGRESS_DEBUG

then run a test, it will display the job and debug output.

If you define REGRESS_WAIT, the script will stop and request:

Start Bareos under debugger and enter anything when ready ...

At this point, you can start any of the daemons under the debugger,
then answer the message by entering any character.  The script will
then continue. For any daemon or daemons that you have manually started,
you will see an error message when the script attempts to run a second
copy, but those messages can be ignored.  This makes it reasonably easy
to run any component or components under the debugger if necessary.

Explicit example:

In shell window 1.

cd regress
export REGRESS_DEBUG=1
export REGRESS_WAIT=1
tests/name-of-script-test
(wait until it tells you to start the debugger)

In shell window 2

cd regress/bin
gdb bareos-xx    (where xx is the component you want to debug).
(possibly set a break point -- normally not)
run -s -f
(wait for the output to stop)

In shell window 1
(enter any character or simply a return)
(ignore the error message it prints complaining that the daemon
you are debugging is already running, which is in fact the case).

That is all there is to it.  The debugger window will get some
output and will stop waiting for input if anything goes wrong
like a seg fault.  At that point, you can enter commands.

The procedure avoids modifying the test scripts and trying to
find pids and the such.  If you want less debug output when
debugging, don't set REGRESS_DEBUG=1.


Troubleshooting
===============

If you run from time to time on a computer that is not connected
to the network, please be sure that "hostname" is set to "localhost",
otherwise, your tests may fail because the hostname used by Bareos's
./configure cannot be properly resolved.

Anyway, you can debug where it is happening in the source code using the
following example.  For example, here I get the following backtrace:

======= Backtrace: =========
/lib/libc.so.6[0xb7b9d6e1]
/lib/libc.so.6(cfree+0x89)[0xb7b9ed79]
/home/kern/bareos/regress/bin/bareos-fd[0x8082ae5]
/home/kern/bareos/regress/bin/bareos-fd[0x8082d58]
/home/kern/bareos/regress/bin/bareos-fd[0x80838ac]
/home/kern/bareos/regress/bin/bareos-fd[0x807aa3f]
/home/kern/bareos/regress/bin/bareos-fd[0x807ac29]
/home/kern/bareos/regress/bin/bareos-fd[0x804d188]
/lib/libc.so.6(__libc_start_main+0xdc)[0xb7b4ef9c]
/home/kern/bareos/regress/bin/bareos-fd[0x804cd21]

Now to convert this into something more meaningful, kill off any hung Bareos
processes.  Note the one that was running -- above you see that it was
bareos-fd, then bring the same binary up in the debugger.  Then start at the
first bareos-fd line, and feed the hex number to gdb as follows:

info symbol 0x8082ae5
free_addresses(dlist*) + 53 in section .text

info symbol 0x8082d58
add_address(dlist**, IPADDR::i_type, unsigned short, int, char const*, char
const*, char**) + 568 in section .text
