From owner-FreeBSD-users-jp@jp.freebsd.org  Tue Nov  6 21:46:46 2001
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id VAA86114;
	Tue, 6 Nov 2001 21:46:46 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from ns.s-lines.net (c203193.ap.plala.or.jp [210.150.203.193])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with SMTP id VAA86109
	for <FreeBSD-users-jp@jp.freebsd.org>; Tue, 6 Nov 2001 21:46:45 +0900 (JST)
	(envelope-from tatsuya@ps.sakura.ne.jp)
Received: (qmail 340 invoked by uid 1009); 6 Nov 2001 12:46:43 -0000
Received: from unknown (HELO presario) (192.168.1.2)
  by gateway.lan.s-lines.net with SMTP; 6 Nov 2001 12:46:43 -0000
Date: Tue, 06 Nov 2001 21:46:43 +0900
From: TATSUYA <tatsuya@ps.sakura.ne.jp>
To: FreeBSD-users-jp@jp.freebsd.org
Organization: S-Lines.net
In-Reply-To: <055201c166ba$152b8b50$2a01a8c0@private>
References: <20011106162940.4FD2.TATSUYA@ps.sakura.ne.jp> <055201c166ba$152b8b50$2a01a8c0@private>
Message-Id: <20011106214018.4FE3.TATSUYA@ps.sakura.ne.jp>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-2022-JP"
Content-Transfer-Encoding: 7bit
X-Mailer: Becky! ver. 2.00.07
Reply-To: FreeBSD-users-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+010328
X-Sequence: FreeBSD-users-jp 65405
Subject: [FreeBSD-users-jp 65405] Re: ISA SCSI
 =?ISO-2022-JP?B?GyRCJSshPCVJJCw7SE1RJEckLSRKJCQbKEI=?= 
Errors-To: owner-FreeBSD-users-jp@jp.freebsd.org
Sender: owner-FreeBSD-users-jp@jp.freebsd.org
X-Originator: tatsuya@ps.sakura.ne.jp

$B!V(B"Hirokazu WATANABE" <gwna@geocities.co.jp>$B!W(B $B$5$s$N(B
$B!V(B[FreeBSD-users-jp 65402] Re: ISA SCSI $B%+!<%I$,;HMQ$G$-$J$$(B $B!W(B $B$X$NJV?.$G$9!#(B

TATSUYA$B!w(BS-Lines.net$B$G$9!#(B

$B!v0lHV2<$K(B boot -v $B$N(Bdmesg$B$r$D$1$^$7$?!#(B

> $B4{$K(B irq 9, 10, 11, 14 $B$,(B PCI $B%G%P%$%9$K;H$o$l$F$$$^$9$h$M!#$H$J$k$H(B
> $B;D$j$O(B 12, 15 $B$@$1$G$9$,!"(Birq 12 $B$O(B PS/2 $B%^%&%9$K;H$o$l$F$$$k$3$H$,(B
> $BB?$$$G$9$7!"(Birq 15 $B$O(B secondary ata $B$K;HMQ$5$l$F$$$k$3$H$,B?$$$G$9!#(B
> $B$3$l$i$N%G%P%$%9$OK\Ev$KB8:_$7$J$$$N$G$9$+!)<B$O(B kernel.conf $B$G(B disable
> $B$7$F$$$k$@$1$H$+$$$&$3$H$O$"$j$^$;$s$G$7$g$&$+!#(B
  $B%^%&%9$OMxMQ$7$F$$$J$$$?$a(B($B:#8e$bMxMQ$9$k$D$b$j$,$J$$$?$a(B)$BLdBj$J$$$N$G$O(B
 $B$H$*$b$$$^$9!#(B

  $B%;%+%s%@%j!<(B ATA$B$O:#8=:_$OMxMQ$7$F$$$J$$$G$9!#(B
  UltraATA66$B%+!<%I$r;X$7$F$$$k$N$G!"%;%+%s%@%j!<$K$D$J$0$3$H$O$J$$$H$*$b$$$^$9!#(B
  $B:#$O(BATA$B%+!<%I$K(BHDD$B$,@\B3$5$l%W%i%$%^%j!<$K!"(BCD-ROM$B$,@\B3$5$l$F$$$^$9!#(B

> $B$^$?!"$3$N>uBV$G$9$H(B ISA PnP $B$N(B AHA-1542CF $B$K(B irq 11 $B$,3d$jEv$F$i$l(B
> $B$k$3$H$O$"$j$($J$$$h$&$K;W$$$^$9!#(BAHA-1542CF $B$rA^$7$?;~$K$O(B PCI $B%G%P(B
> $B%$%9$X$N(B irq $B3d$jEv$F$,JQ2=$7$F$$$^$;$s$G$7$g$&$+!#(B
  SCSI$B%+!<%I$r;X$7$?$H$-$O0J2<$N$h$&$K$J$C$F$$$^$9(B

SCSI$B%+!<%I$N(BIRQ$B$r(B12$B$H$7$?>l9g$O!":#$^$GJQ$o$j$J$/!"(B
---
ata0: at 0x1f0 irq 14 on atapci0
atapci1: <Promise ATA66 controller> port 0xfe80-0xfebf,0xffa8-0xffab,0xffa0-0xffa7,0xffac-0xffaf,0xffe0-0xffe7 mem 0xffbc0000-0xffbdffff irq 10 at device 11.0 on pci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xff80-0xff9f irq 9 at device 15.0 on pci0
de0: <Digital 21140A Fast Ethernet> port 0xfc80-0xfcff mem 0xffbebc00-0xffbebc7f irq 11 at device 17.0 on pci0
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 19.0 irq 10
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
---
$B$H$J$C$F$$$^$9!#(B

SCSI$B%+!<%I$N(BIRQ$B$r(B11$B$H$7$?>l9g$bB>$N(BIRQ$B$KJQ2=$O$J$/!"(B
unable to allocate excluse use of irq
device_probe_and_attach : aha0 returned 12
$B$H(BAHA0$B$N$H$3$m$KI=<($5$l$^$9!#(B


boot -v $B$N!"(Bdmesg$B$G$9!#(B
----
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #11: Tue Nov  6 00:35:23 JST 2001
    tatsuya@ns.s-lines.net:/usr/src/sys/compile/MainServer
Calibrating clock(s) ... TSC clock: 179631855 Hz, i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium Pro (179.63-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
  Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0032c000 - 0x03ff7fff, 63750144 bytes (15564 pages)
avail memory = 62291968 (60832K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fd9e0
bios32: Entry = 0xfd9f0 (c00fd9f0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xda11
pnpbios: Found PnP BIOS data at 0xc00fa790
pnpbios: Entry = f0000:a890  Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0306000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=12378086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x1237, revid=0x02
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7000, revid=0x01
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7010, revid=0x00
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000ff60, size  4
found->	vendor=0x105a, dev=0x4d38, revid=0x01
	class=01-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base 0000ffe0, size  3
	map[14]: type 3, range 32, base 0000ffac, size  2
	map[18]: type 1, range 32, base 0000ffa0, size  3
	map[1c]: type 3, range 32, base 0000ffa8, size  2
	map[20]: type 1, range 32, base 0000fe80, size  6
	map[24]: type 1, range 32, base ffbc0000, size 17
found->	vendor=0x10ec, dev=0x8029, revid=0x00
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=9
	map[10]: type 1, range 32, base 0000ff80, size  5
found->	vendor=0x1011, dev=0x0009, revid=0x20
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 0000fc80, size  7
	map[14]: type 1, range 32, base ffbebc00, size  7
found->	vendor=0x102b, dev=0x051a, revid=0x02
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base ffbec000, size 14
	map[14]: type 1, range 32, base ff000000, size 23
	map[18]: type 1, range 32, base fe000000, size 23
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
	I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks
	Extended BIOS: enabled
	Lower BIOS: enabled
	Coprocessor IRQ13: enabled
	Mouse IRQ12: disabled
	Interrupt Routing: A: IRQ10, B: IRQ10, C: IRQ11, D: IRQ9
		MB0: disabled, MB1: 
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xff60-0xff6f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xff60
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=14 b=eb
ata0: mask=03 status0=00 status1=00
ata0: devices=0c
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xff68
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
atapci1: <Promise ATA66 controller> port 0xfe80-0xfebf,0xffa8-0xffab,0xffa0-0xffa7,0xffac-0xffaf,0xffe0-0xffe7 mem 0xffbc0000-0xffbdffff irq 10 at device 11.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0xffe0 altiobase=0xffae bmaddr=0xfe80
ata2: mask=03 status0=50 status1=00
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI probe a=00 b=00
ata2-slave: ATAPI probe a=00 b=00
ata2: mask=03 status0=50 status1=00
ata2-master: ATA probe a=01 b=a5
ata2: devices=01
ata2: at 0xffe0 on atapci1
ata3: iobase=0xffa0 altiobase=0xffaa bmaddr=0xfe88
ata3: mask=03 status0=00 status1=00
ata3: mask=03 ostat0=00 ostat2=00
ata3-master: ATAPI probe a=00 b=00
ata3-slave: ATAPI probe a=00 b=00
ata3: mask=03 status0=00 status1=00
ata3: devices=00
ata3: at 0xffa0 on atapci1
	using shared irq10.
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xff80-0xff9f irq 9 at device 15.0 on pci0
bpf: ed0 attached
ed0: address 00:90:99:12:10:8a, type NE2000 (16 bit) 
de0: <Digital 21140A Fast Ethernet> port 0xfc80-0xfcff mem 0xffbebc00-0xffbebc7f irq 11 at device 17.0 on pci0
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:c0:d3:ad:f3
bpf: de0 attached
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> (vendor=0x102b, dev=0x051a) at 19.0 irq 10
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xea000-0xebfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata5: mask=00 status0=ff status1=ff
ata5: probe allocation failed
ata5 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:026a7f3f 0..618=619 cylinders, 0..127=128 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 684440, tty 63009a, net 670a9a
bpf: sl0 attached
bpf: faith0 attached
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging disabled
de0: enabling Full Duplex 100baseTX port
ata0-slave: ata_command: timeout waiting for intr
ata0-slave: identify failed
ata2-master: success setting WDMA2 on Promise chip
Creating DISK ad4
ad4: <WDC AC32500H/10.07H11> ATA-0 disk at ata2-master
ad4: 2441MB (4999680 sectors), 4960 cyls, 16 heads, 63 S/T, 512 B/S
ad4: 1 secs/int, 1 depth queue, WDMA2
ad4: piomode=4 dmamode=2 udmamode=-1 cblid=0
Promise check1 failed
ad4: 2441MB <WDC AC32500H> [4960/16/63] at ata2-master WDMA2
ata0-master: piomode=3 dmamode=2 udmamode=-1 dmaflag=1
ata0-master: success setting PIO3 on generic chip
acd0: <FX120T/b04> CDROM drive at ata0 as master
acd0: read 2066KB/s (17007KB/s), 256KB buffer, PIO3
acd0: Reads: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
Mounting root from ufs:/dev/ad4s1a
ad4s1: type 0xa5, start 63, end = 4999679, size 4999617 : OK
start_init: trying /sbin/init
bpf: tun0 attached
----

---
 TATSUYA   E-Mail : tatsuya@ps.sakura.ne.jp
           W e b  : http://TatsuyaUeda.com/
           Phone  : tatsuya_ueda@jp-c.ne.jp
 Flet's ADSL + FreeBSD HomeServer -> http://www.S-Lines.net/

