From owner-FreeBSD-users-jp@jp.freebsd.org  Tue Jun 12 22:57:55 2001
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id WAA02222;
	Tue, 12 Jun 2001 22:57:55 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from multi.al.rim.or.jp (multi.al.rim.or.jp [202.247.191.124])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with ESMTP id WAA02217
	for <FreeBSD-users-jp@jp.freebsd.org>; Tue, 12 Jun 2001 22:57:54 +0900 (JST)
	(envelope-from amadeus@yk.rim.or.jp)
Received: from shell.rim.or.jp
	by multi.al.rim.or.jp (3.7W/HMX-12) id WAA06918
	for <FreeBSD-users-jp@jp.freebsd.org>; Tue, 12 Jun 2001 22:57:54 +0900 (JST)
Received: from shell.al.rim.or.jp (amadeus_yk@localhost [127.0.0.1])
	by shell.rim.or.jp (8.9.3/3.7W/DI-2000071215) with ESMTP id WAA96545
	for <FreeBSD-users-jp@jp.freebsd.org>; Tue, 12 Jun 2001 22:57:54 +0900 (JST)
	(envelope-from amadeus@yk.rim.or.jp)
Message-Id: <200106121357.WAA96545@shell.rim.or.jp>
From: Takaaki Nomura (=?ISO-2022-JP?B?GyRCTG5CPDliTEAbKEI=?=)
    <amadeus@yk.rim.or.jp>
To: FreeBSD-users-jp@jp.freebsd.org
In-reply-to: Your message of "Tue, 12 Jun 2001 21:16:19 JST"
References: <200106120900.SAA63264@shell.rim.or.jp>  <20010612211619.B30889@ns.ribbon.or.jp> 
Mime-Version: 1.0
Content-Type: text/plain;charset="ISO-2022-JP"
Date: Tue, 12 Jun 2001 22:57:53 +0900
Reply-To: FreeBSD-users-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+010328
X-Sequence: FreeBSD-users-jp 62232
Subject: [FreeBSD-users-jp 62232] Re: USB Card Reader and SCSI HDD 
Errors-To: owner-FreeBSD-users-jp@jp.freebsd.org
Sender: owner-FreeBSD-users-jp@jp.freebsd.org
X-Originator: amadeus@yk.rim.or.jp

$BLnB<!w(Binter.net $B$G$9!#(B

On Tue, 12 Jun 2001 21:16:19 +0900,
oota toshiya <elm_jpn@anet.ne.jp> wrote:
>$B$G!"5U$N<ALd$J$N$G$9$,!"B>$N4D6-$G$O$I$N$h$&$KG'<1$7$F$$$k$N$G$7$g$&$+!)(B
>$BA4$/F1$8$h$&$K!"(BSCSI$B$NA0$K$J$C$F$7$^$&$N$G$7$g$&$+!#(B

Windows Me $B$G$O!"%j%`!<%P%V%k%G%#%9%/$H$7$FLdBjL5$/FI$_=q$-=PMh$F$$$^$9!#(B
$B=gHV$O!"(BSCSI MO $B$N<!$G$9!#%a%G%#%"$O!"%G%8%+%a$N%9%^!<%H%a%G%#%"$r;HMQ$7(B
$B$F$$$^$9!#(B

Linux $B$G$O!"(BSCSI HDD $B$HF1MM$KG'<1$5$l$^$9$,!"$=$l$h$j8e$K$J$k$h$&$G$9!#(B
SCSI HDD($B$&$A0l$D$O(B MO)$B$r#3$D(B(sda-sdc)$B;H$C$?9=@.$G$O!"(Bsdd $B$H$J$j$^$9!#Fb(B
$BMF$rFI$a$k$N$O3NG'$G$-$^$7$?!#(Bdmesg $B$N=PNO$rIU$1$^$9!#%3%s%Q%/%H%U%i%C%7%e(B
$B$bF~$l$F$*$1$P!"(Bsde $B$H$7$F;H$($=$&$G$9!#(B

$B=q$-K:$l$^$7$?$,!"(BFreeBSD $B$G(B SCSI HDD $B$NHV9f$,$:$l$k$N$O!"%9%^!<%H%a%G%#(B
$B%"$NM-L5$K4X78$"$j$^$;$s!#(B

Linux version 2.4.5 (nomura@amadeus.yk.rim.or.jp) (gcc version 2.96 20000731 (Red Hat Linux 7.0)) #1 Fri Jun 1 02:42:30 EDT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000003ffdc00 (usable)
 BIOS-e820: 0000000003ffdc00 - 0000000003fffc00 (ACPI data)
 BIOS-e820: 0000000003fffc00 - 0000000004000000 (ACPI NVS)
 BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
On node 0 totalpages: 16381
zone(0): 4096 pages.
zone(1): 12285 pages.
zone(2): 0 pages.
Kernel command line: 
Initializing CPU#0
Detected 597.409 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1192.75 BogoMIPS
Memory: 62056k/65524k available (1164k kernel code, 3080k reserved, 426k data, 184k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 0387f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0387f9ff 00000000 00000000 00000000
CPU serial number disabled.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfd983, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 41165kB/13721kB, 128 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
hda: WDC WD102AA, ATA DISK drive
hdb: QUANTUM FIREBALL SE4.3A, ATA DISK drive
hdc: _NEC DV-5700A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 20044080 sectors (10263 MB) w/2048KiB Cache, CHS=1247/255/63
hdb: 8418816 sectors (4310 MB) w/80KiB Cache, CHS=524/255/63
hdc: ATAPI 40X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1
 hdb: hdb1 hdb2 < hdb5 hdb6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sis900.c: v1.07.11  4/10/2001
PCI: Found IRQ 9 for device 00:10.0
PCI: The same IRQ used for device 00:07.2
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x1400, IRQ 9, 00:40:26:b9:bd:32.
PPP generic driver version 2.4.1
Registered PPPoX v0.5
Registered PPPoE v0.6.5
[drm] Initialized tdfx 1.0.0 20000928 on minor 63
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0e.0
PCI: The same IRQ used for device 01:00.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
        <Adaptec 2940 SCSI adapter>
        aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs

  Vendor: IBM       Model: DPES-31080        Rev: S31Q
  Type:   Direct-Access                      ANSI SCSI revision: 02
(scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 15)
  Vendor: QUANTUM   Model: FIREBALL ST4.3S   Rev: 0F0C
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: FUJITSU   Model: M2513A            Rev: 1500
  Type:   Optical Device                     ANSI SCSI revision: 02
(scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 10)
scsi0:0:0:0: Tagged Queuing enabled.  Depth 8
scsi0:0:1:0: Tagged Queuing enabled.  Depth 8
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Detected scsi removable disk sdc at scsi0, channel 0, id 5, lun 0
SCSI device sda: 2118144 512-byte hdwr sectors (1084 MB)
 sda: sda4
(scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
SCSI device sdb: 8471232 512-byte hdwr sectors (4337 MB)
 sdb: sdb1 sdb2 sdb3 sdb4
 sdb1: <bsd: sdb5 sdb6 sdb7 >
SCSI device sdc: 310352 2048-byte hdwr sectors (636 MB)
sdc: Write Protect is off
 sdc: sdc1 sdc2 sdc3 sdc4
Linux PCMCIA Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
usb.c: registered new driver hub
PCI: Found IRQ 9 for device 00:07.2
PCI: The same IRQ used for device 00:10.0
uhci.c: USB UHCI at I/O 0x1840, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c:  Linus Torvalds, Johannes Erdfelt, Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber
uhci.c: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k freed
hub.c: USB new device connect on bus1/2, assigned device number 2
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: HAGIWARA  Model: FlashGate DUAL    Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi removable disk sdd at scsi1, channel 0, id 0, lun 0
  Vendor: HAGIWARA  Model: FlashGate DUAL    Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi removable disk sde at scsi1, channel 0, id 0, lun 1
sdd : READ CAPACITY failed.
sdd : status = 1, message = 00, host = 0, driver = 08 
sdd : extended sense code = 2 
sdd : block size assumed to be 512 bytes, disk size 1GB.  
 sdd: I/O error: dev 08:30, sector 0
 unable to read partition table
sde : READ CAPACITY failed.
sde : status = 1, message = 00, host = 0, driver = 08 
sde : extended sense code = 2 
sde : block size assumed to be 512 bytes, disk size 1GB.  
 sde: I/O error: dev 08:40, sector 0
 unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
Adding Swap: 50168k swap-space (priority -1)
es1371: version v0.30 time 02:53:03 Jun  1 2001
PCI: Found IRQ 10 for device 00:0d.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0x1800 irq 10
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev A)
eth0: Media Link On 100mbps full-duplex 
eth0: Media Link On 100mbps full-duplex 
