From owner-FreeBSD-users-jp@jp.freebsd.org  Mon Sep 11 17:14:41 2000
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id RAA10191;
	Mon, 11 Sep 2000 17:14:41 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from mail.netwave.or.jp (mail.netwave.or.jp [202.214.48.114])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with ESMTP id RAA10181
	for <FreeBSD-users-jp@jp.freebsd.org>; Mon, 11 Sep 2000 17:14:35 +0900 (JST)
	(envelope-from takesima@mail.netwave.or.jp)
Received: from bless (ppp228044.netwave.or.jp [210.142.228.44])
	by mail.netwave.or.jp (8.9.3+3.2W/3.7W) with SMTP id RAA26339
	for <FreeBSD-users-jp@jp.freebsd.org>; Mon, 11 Sep 2000 17:14:24 +0900 (JST)
Message-ID: <002501c01bc9$57303f10$dd48a8c0@bless>
From: "takesima" <takesima@mail.netwave.or.jp>
To: <FreeBSD-users-jp@jp.freebsd.org>
References: <000c01c01b70$cdca53d0$c848a8c0@ibm300> <20000911134428Q.yanagida@gin.or.jp>
Date: Mon, 11 Sep 2000 17:19:17 +0900
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-2022-jp"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.00.2919.6700
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700
Reply-To: FreeBSD-users-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+000315
X-Sequence: FreeBSD-users-jp 55051
Subject: [FreeBSD-users-jp 55051] Re: USB ethernet
 =?ISO-2022-JP?B?GyRCISFGMCQrJDobKEI=?= 
Errors-To: owner-FreeBSD-users-jp@jp.freebsd.org
Sender: owner-FreeBSD-users-jp@jp.freebsd.org
X-Originator: takesima@mail.netwave.or.jp

$BC]Eg!w2,K-IB1!$G$9!#(B

$B$4?F@Z$J$4JVEz46<U?=$7>e$2$^$9!#(B
$B$5$FBW$$$?=IBj$G$9$,!"(B

> inflames# ifconfig aue0
> aue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet6 fe80::290:99ff:fe1a:998%aue0 prefixlen 64 scopeid 0x2
>         inet 10.0.0.3 netmask 0xff000000 broadcast 10.255.255.255
>         ether 00:90:99:1a:09:98
>         media: autoselect (100baseTX <full-duplex>) status: active
>         supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP none
>
> $B$H$$$&$o$1$G!$(B $B%I%i%$%PB&$NLdBj$+!$(B/etc/usb.conf $BB&$NLdBj$+!$$=$l0J30$K(B
> $BLdBj$,$"$k$N$+$r@Z$jJ,$1$k$?$a$K$b!$$H$j$"$($:!$(Bifconfig $B$G(BIP$B%"%I%l%9$r(B
> $B3d$jEv$F$F$_$F!$$=$N7k2L$r8+$;$F$b$i$($l$P!$$b$C$H%"%I%P%$%9$,(B
> $BF@$i$l$k$+$bCN$l$^$;$s!%(B

$B$^$:!"(Bi$B#f(Bconfig$B!!(B-a$B!!$G$9!#(B
aue0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.72.112 netmask 0xffffff00 broadcast 192.168.72.255
        inet6 fe80::290:99ff:fe1a:25da%aue0 prefixlen 64 scopeid 0x1
        ether 00:90:99:1a:25:da
        media: autoselect (10baseT/UTP) status: active
        supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UT
P <full-duplex> 10baseT/UTP none
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
faith0: flags=8000<MULTICAST> mtu 1500
$B$H0l1~G'<1$5$l$F$^$9!#(B

$B<!$,!!(B/etc/usb.conf$B$G$9$,!"(B
# Configuration file the USB daemon.
#
# See usbd.conf(5) for the description of the format of the file.
#
# $FreeBSD: src/etc/usbd.conf,v 1.5.2.1 2000/03/20 12:24:56 peter Exp $
# Firmware download into the ActiveWire board. After the firmware download
is
# done the device detaches and reappears as something new and shiny.
#
device "ActiveWire board, firmware download"
        vendor  0x0854
        product 0x0100
        release 0x0000
        attach "/usr/local/bin/ezdownload -f
/usr/local/share/usb/firmware/0854.
0100.0_01.hex ${DEVNAME}"
# Firmware download for Entrega Serial DB25 adapter.
#
device "Entrega Serial with UART"
        product 0x8001
        vendor  0x1645
        release 0x0101
        attach "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio;
fi"
        attach "/usr/sbin/ezdownload -v -f
/usr/share/usb/firmware/1645.8001.010
1 /dev/${DEVNAME}"
# The piece below has to be copied for every drive. It does not work for the
# generic case, the umass storage class uses interface drivers. The info for
# the interfaces is not yet exported.
#
device "USB Zip drive"
        vendor  0x059b
        product 0x0001
        release 0x0100
        attach "/sbin/camcontrol rescan bus 0"
# The entry for the cue, kue and aue ethernet interface drivers.
device "USB ethernet"
        devname "[ack]ue[0-9]+"
##$B;&$7$F$^$9(B      attach "dhclient ${DEVNAME}"
##$B;&$7$F$^$9(B      detach "killall dhclient"
# The entry below is for the Logitech mouse. Replace the product and vendor
# id (and the device name of course) with the data for your mouse.
#
device "Mouse"
        devname "ums[0-9]+"
        attach "/usr/sbin/moused -p /dev/${DEVNAME} -I
/var/run/moused.${DEVNAME
}.pid"
# The fallthrough entry: Nothing is specified, nothing is done.  And it
isn't
# necessary at all :-).  Just for pretty printing in debugging mode.
#
device "USB device"

/etc/hosts$B$G$9$,!"(B
127.0.0.1               localhost.hiroyuki.co.jp localhost
192.168.72.112          bsdnote.hiroyuki.co.jp bsdnote
192.168.72.112          bsdnote.hiroyuki.co.jp.
192.168.72.221          bless.hiroyuki.co.jp   bless
$B$G$9!#(B

$B$G(Bwindows2000$B$N(B192.168.72.221$B$+$i(B
ping$B!!(B192.168.72.112$B$7$F$b$?$I$jCe$1$^$;$s!#(B
$B0J>e!"0l@h$:=IBj$rDs=P?=$7>e$2$^$9!#(B

$B2<5-@[(BHP$B$N(Bfml$B$O(B
/var/spool/$B#f(Bml/okou$B$O(B
/var/spool/ml/okou$B$N%?%$%W%_%9$G$7$?!#(B

_/_/_/_/_/_/_/_/_/_/_/_/_/_/
takesima@mail.netwave.or.jp
http://www.netwave.or.jp/~takesima






