From owner-FreeBSD-users-jp@jp.freebsd.org  Mon Jun 28 09:37:54 1999
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id JAA72885;
	Mon, 28 Jun 1999 09:37:54 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from cop-1.canon-copyer.co.jp (cop-1.canon-copyer.co.jp [210.225.212.1])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with ESMTP id JAA72880
	for <FreeBSD-users-jp@jp.freebsd.org>; Mon, 28 Jun 1999 09:37:54 +0900 (JST)
	(envelope-from wakiyama@canon-copyer.co.jp)
Received: from cop-3.canon-copyer.co.jp (cop-3 [172.22.253.1])
	by cop-1.canon-copyer.co.jp (8.9.3+3.1W/3.7Wcop-1) with ESMTP id JAA12096
	for <FreeBSD-users-jp@jp.freebsd.org>; Mon, 28 Jun 1999 09:38:43 +0900 (JST)
Received: from dolphine (localhost [127.0.0.1])
	by cop-3.canon-copyer.co.jp (8.9.3/3.7W) with SMTP id JAA11262
	for <FreeBSD-users-jp@jp.freebsd.org>; Mon, 28 Jun 1999 09:38:15 +0900 (JST)
Message-ID: <002801bec0fe$beeecda0$03ed16ac@kmtcc.co.jp>
From: "Yoshinori Wakiyama" <wakiyama@canon-copyer.co.jp>
To: <FreeBSD-users-jp@jp.freebsd.org>
References: <199906280025.JAA00829@nadia.pes.com1.fc.nec.co.jp>
Date: Mon, 28 Jun 1999 09:39:55 +0900
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-2022-jp"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.00.2014.211
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211
Reply-To: FreeBSD-users-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+990625
X-Sequence: FreeBSD-users-jp 43650
Subject: [FreeBSD-users-jp 43650] Re: samba
 =?ISO-2022-JP?B?GyRCJEckTjB1On4kSyRGGyhC?= 
Errors-To: owner-FreeBSD-users-jp@jp.freebsd.org
Sender: owner-FreeBSD-users-jp@jp.freebsd.org
X-Originator: wakiyama@canon-copyer.co.jp

$B$o$-$d$^!w$-$d$N$s$3$T$"$G$9!#(B

$B$?$/$5$s$N$+$?$,$?$N$465<x62=L$G$9!#(B

$B0J2<$K!!(B/etc/printcap$B!!$G$9!#(B

lp|local line printer:\
 :sh:\
 :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:

gs|Postscript through ghostscript\
 :lp=/dev/lpt0:sh:\
 :sd=/var/spool/output/glpd:\
 :lf=/var/log/lpd-errs:\
 :if=/usr/local/libexec/gsfilter.sh:

$B0J2<$O!"(Bsmb.conf$B!!$G$9!#(B

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings
=====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
   workgroup = WAKEY

# server string is the equivalent of the NT Description field
   server string = SMP DualSamba

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = no

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# coading add statement
 client code page = 932
 coding system = cap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd

# Uncomment this if you want a guest account, you must add this to
/etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = user
# Use password server option only with security = server
;   password server = <NT-Server-Name>

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
  encrypt passwords = yes

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /usr/local/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
   preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
;   domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no

#============================ Share Definitions
==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain
Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[SambaPr]
   comment = epson mj5000c
   printer = lp
   path = /var/spool/samba
   browseable = yes
   public = yes
   writable = no
   printable = yes

[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in
fred's
# home directory. Note that fred must have write access to the spool
directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all
files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of
course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In
this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765


$B$=$l$H!"B@ED$5$s$4;XE&$N(B

>$B%P!<%8%g%sHV9f$"$C$F$^$9!)(B
>$B:G?7HG$O(B 2.0.4b $B$J$s$G$9$,(B......

$B$3$l!"$=$NDL$j$G$9!#$9$_$^$;$s!#4V0c$($F$^$7$?!#(B





